Huawei Technologies AR1220WIFI Access Router User Manual Hardware Description
Huawei Technologies Co.,Ltd Access Router Hardware Description
Contents
- 1. User Manual
- 2. User manual I
- 3. User manual II
- 4. User manual III
User manual III
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1716095 |
| Application ID | 7feLxi4BXk2IYpOHLNSDqQ== |
| Document Description | User manual III |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 260.16kB (3252057 bits) |
| Date Submitted | 2012-06-06 00:00:00 |
| Date Available | 2012-09-06 00:00:00 |
| Creation Date | 2012-04-27 00:41:47 |
| Producing Software | Antenna House PDF Output Library 2.4.0 (Windows) |
| Document Lastmod | 2012-04-27 14:59:19 |
| Document Title | Hardware Description |
| Document Creator | XSL Formatter V4.1 R1 (4,1,2006,1206) for Windows |
| Document Author: | Huawei Technologies Co., Ltd. |
Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Issue 03 Date 2012-04-20 HUAWEI TECHNOLOGIES CO., LTD. Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description About This Document About This Document Intended Audience This document provides an overall description of the AR routers, details about each chassis and board, cables available to the device, and lists of components. This document is intended for: Network planning engineers Hardware installation engineers Commissioning engineers On-site maintenance engineers System maintenance engineers Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description DANGER WARNING CAUTION Issue 03 (2012-04-20) Indicates a hazard with a high level of risk, which if not avoided, will result in death or serious injury. Indicates a hazard with a medium or low level of risk, which if not avoided, could result in minor or moderate injury. Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. TIP Indicates a tip that may help you solve a problem or save time. NOTE Provides additional information to emphasize or supplement important points of the main text. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. ii Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description About This Document Change History Changes between document issues are cumulative. Therefore, the latest document issue contains all the changes in previous issues. Changes in Issue 03 (2012-04-20) Based on issue 02 (2012-03-19), this issue has the following updates: 3G-HSPA+7 sub card 4GEW-T sub card 4GEW-S sub card VDSL sub card AR1220L Changes in Issue 02 (2012-03-19) Based on issue 01 (2011-12-30), this issue has the following updates: The AR1220 DC model is added. Changes in Issue 01 (2011-12-30) Initial commercial release. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. iii Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Contents Contents About This Document.....................................................................................................................ii 1 Version Matching..........................................................................................................................1 1.1 Matching Between Product Models and Software Versions..............................................................................2 1.2 Matching Between Power Supplies and Software Versions..............................................................................2 1.3 Matching Between Cards and Software Versions..............................................................................................5 2 Chassis...........................................................................................................................................15 2.1 Introduction......................................................................................................................................................16 2.2 Naming Convention..........................................................................................................................................17 2.3 Device Structure...............................................................................................................................................18 2.3.1 AR1200 Series.........................................................................................................................................18 2.3.2 AR2200 Series.........................................................................................................................................22 2.3.3 AR3200 Series.........................................................................................................................................25 2.4 System Configuration.......................................................................................................................................28 2.5 Physical Specifications.....................................................................................................................................28 3 Power Supply Units....................................................................................................................30 3.1 Power Supply Configuration............................................................................................................................31 3.2 Power Supply Unit Connection Layouts..........................................................................................................32 3.2.1 Single DC Power Supply Unit.................................................................................................................32 3.2.2 Two DC Power Supply Units..................................................................................................................32 3.2.3 Single Non-PoE AC Power Supply Unit.................................................................................................33 3.2.4 Two Non-PoE AC Power Supply Units..................................................................................................33 3.2.5 Single Non-PoE + PoE AC Power Supply Unit......................................................................................34 3.3 HW-100-48AC14D..........................................................................................................................................35 3.4 PWR350A.........................................................................................................................................................38 3.5 PWR350D.........................................................................................................................................................41 4 Heat Dissipation System............................................................................................................44 4.1 Heat Dissipation Process..................................................................................................................................45 4.2 AR2240 Fan Module........................................................................................................................................46 4.3 AR3260 Fan Module........................................................................................................................................48 5 Cards..............................................................................................................................................51 5.1 Introduction......................................................................................................................................................52 Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. iv Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Contents 5.1.1 Relationships Between Cards..................................................................................................................52 5.1.2 Interface Numbering................................................................................................................................54 5.1.3 Card Dimensions.....................................................................................................................................55 5.2 SRU..................................................................................................................................................................56 5.2.1 Functions and Applications.....................................................................................................................56 5.2.2 Panel and Interfaces.................................................................................................................................57 5.2.3 Technical Specifications..........................................................................................................................62 5.3 WLAN Subcard................................................................................................................................................62 5.3.1 Functions and Applications.....................................................................................................................62 5.3.2 Technical Specifications..........................................................................................................................63 5.4 Ethernet LAN Interface Card............................................................................................................................63 5.4.1 8FE1GE-8-Port 100BASE-RJ45 and 1-Port 1000BASE-RJ45 L2/L3 Ethernet Interface Card.............63 5.4.2 24GE-24-Port 1000BASE-RJ45 L2/L3 Ethernet Interface Card............................................................67 5.5 WAN Interface Card.........................................................................................................................................69 5.5.1 1GEC (1-Port-GE Combo WAN Interface Card)....................................................................................69 5.5.2 2FE-2-Port-FE WAN Interface Card.......................................................................................................74 5.5.3 1E1T1-M/2E1T1-M-1/2 Port-Channelized E1/T1/PRI/VE1 Multifunctional Interface Card................76 5.5.4 1E1T1-F/2E1T1-F (1/2-Port-Fractional Channelized E1/T1 WAN Interface Card)..............................81 5.5.5 1SA/2SA-1/2-Port-Synchronous/Asynchronous WAN Interface Card..................................................84 5.5.6 8AS (8-Port-Asynchronous WAN Interface Card)..................................................................................88 5.5.7 1BST (1-Port-ISDN S/T WAN Interface Card)......................................................................................90 5.5.8 1CPOS-155M (1-Port Channelized POS Interface Card).......................................................................93 5.5.9 3G-HSPA+7 (3G WAN Interface Card).................................................................................................96 5.5.10 4GEW-T (4-Port-GE Electrical WAN Interface Card).......................................................................101 5.5.11 4GEW-S (4-Port-GE Optical WAN Interface Card............................................................................103 5.6 Voice Interface Card.......................................................................................................................................107 5.6.1 2BST (2-Port-ISDN S/T Voice Interface Card)....................................................................................107 5.6.2 4FXS1FXO-4-Port FXS and 1-Port FXO Voice Interface Card...........................................................111 5.6.3 16/32/64/128-Channel DSP Module.....................................................................................................114 5.7 xDSL/xPON Interface Card............................................................................................................................115 5.7.1 ADSL-A/M and ADSL-B-1-Port-ADSL2+ ANNEX A/M and B WAN Interface Card......................115 5.7.2 4G.SHDSL-1-Port-4-Channel G.SHDSL WAN Interface Card...........................................................119 5.7.3 1PON (1-Port GPON/EPON Dual-Mode Interface Card).....................................................................121 5.7.4 VDSL (1-Port VDSL2 over POTS WAN Interface Card)....................................................................125 6 Cables...........................................................................................................................................129 6.1 AC Power Cable.............................................................................................................................................131 6.2 DC Power Cables............................................................................................................................................132 6.3 Ground Cable..................................................................................................................................................134 6.4 Console Cable.................................................................................................................................................135 6.5 Network Cable................................................................................................................................................136 6.6 Optical Fiber...................................................................................................................................................139 6.7 E1/T1 Trunk Cables........................................................................................................................................143 Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Contents 6.8 Synchronous/Asynchronous Serial Interface Cables......................................................................................148 6.9 4G.SHDSL Cables..........................................................................................................................................154 6.10 ISDN-ST Cables...........................................................................................................................................156 6.11 Regular Telephone Lines..............................................................................................................................160 6.12 8AS Cable.....................................................................................................................................................161 6.13 3G Antenna...................................................................................................................................................166 7 List of Indicators........................................................................................................................170 7.1 Indicators on the AR1200 Panel.....................................................................................................................171 7.2 Indicators on the AR2220 Panel.....................................................................................................................174 7.3 Indicators on the AR2240 Panel.....................................................................................................................176 7.4 Indicators on the AR3260 Panel.....................................................................................................................177 7.5 Fan Module Indicators....................................................................................................................................177 7.6 Power Indicators.............................................................................................................................................178 7.7 SRU Indicators...............................................................................................................................................182 8 List of Cards................................................................................................................................185 8.1 Cards Supported by the AR............................................................................................................................186 8.2 Power Consumption and Weight....................................................................................................................195 9 List of Interface Attributes.......................................................................................................197 9.1 Electrical Interfaces........................................................................................................................................199 9.2 GE/PON Optical Interface Attributes.............................................................................................................200 9.3 CPOS Interface Attributes..............................................................................................................................202 9.4 E1 Interface Attributes....................................................................................................................................203 9.5 T1 Interface Attributes....................................................................................................................................204 9.6 Synchronous/Asynchronous Serial Interface Attributes.................................................................................205 9.7 ISDN S/T Interface Attributes........................................................................................................................206 9.8 FXS/FXO Interface Attributes........................................................................................................................206 9.9 ADSL2/ADSL2+/G.SHDSL Interface Attributes..........................................................................................208 9.10 Attributes of the Console Interface...............................................................................................................209 9.11 Attributes of the USB Interface....................................................................................................................209 9.12 3G Interface Attributes.................................................................................................................................210 9.13 VDSL Interface Attributes............................................................................................................................211 Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. vi Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 1 Version Matching Version Matching About This Chapter This section describes the matching relationships between the chassis, power supplies, cards, and system software versions of AR routers. NOTE l AR version roadmap: ARV200R001C00, ARV200R001C01, ARV200R002C00, ARV200R002C01. l Unless otherwise specified, if a power supply or card is supported by version A, it is also supported by all versions later than version A. 1.1 Matching Between Product Models and Software Versions This section describes the matching relationship between AR models and software versions. 1.2 Matching Between Power Supplies and Software Versions This section describes the matching relationships between power supplies, power modes, and software versions. 1.3 Matching Between Cards and Software Versions This section describes the cards supported by AR routers, including SRUs, Ethernet LAN interface cards, WAN interface cards, voice interface cards, and xDSL/xPON interface cards. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 1 Version Matching 1.1 Matching Between Product Models and Software Versions This section describes the matching relationship between AR models and software versions. Table 1-1 Matching between product models and software versions Model Software Version ARV200R0 01C00 ARV200R0 01C01 ARV200R0 02C00 ARV200R0 02C01 AR1220 √ √ √ √ AR1220V √ √ √ √ AR1220W × √ √ √ AR1220VW × √ √ √ AR1220L × × × √ AR2200 series AR2220 √ √ √ √ AR2240 √ √ √ √ AR3200 series AR3260 √ √ √ √ AR1200 series 1.2 Matching Between Power Supplies and Software Versions This section describes the matching relationships between power supplies, power modes, and software versions. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 1 Version Matching Table 1-2 Matching between power supplies and software versions Model&Version 54 W AC Pow er Sup ply Unit in an Ope Rac 54 W DC Pow er Sup ply Unit in an Ope Rac 60 W AC Pow er Sup ply Unit in an Ope Rac 3.3 HW100-4 8AC1 4D PW R150 3.4 PWR 350A 150 DC Powe Supp ly Unit 3.5 PWR3 50D ARV20 0R001C 00 AR1220 √ × × × × × × × AR1220V √ × × √ × × × × AR2220 × × × × √ × × × AR2240 × × × × × √ × × AR3260 × × × × × √ × × AR1220 × √ √ × × × × × AR1220V × × √ √ × × × × AR1220W × × √ √ × × × × AR1220V × × √ √ × × × × AR2220 × × × × √ × √ × AR2240 × × × × × √ × √ AR3260 × × × × × √ × √ AR1220 × × √ × × × × × AR1220V × × √ √ × × × × AR1220W × × √ √ × × × × AR1220V × × √ √ × × × × AR2220 × × × × √ × √ × AR2240 × × × × × √ × √ AR3260 × × × × × √ × √ AR1220 × × √ × × × × × AR1220V × × √ √ × × × × ARV20 0R001C 01 ARV20 0R002C 00 ARV20 0R002C 01 Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Model&Version 1 Version Matching 54 W AC Pow er Sup ply Unit in an Ope Rac 54 W DC Pow er Sup ply Unit in an Ope Rac 60 W AC Pow er Sup ply Unit in an Ope Rac 3.3 HW100-4 8AC1 4D PW R150 3.4 PWR 350A 150 DC Powe Supp ly Unit 3.5 PWR3 50D AR1220W × × √ √ × × × × AR1220V × × √ √ × × × × AR1220L × × √ × × × × × AR2220 × × × × √ × √ × AR2240 × × × × × √ × √ AR3260 × × × × × √ × √ Table 1-3 Matching between power modes and software versions Model&Version ARV 200R 001C 00 ARV 200R 001C 01 Issue 03 (2012-04-20) Single DC Power Supply Unit Dual DC Power Supply Units Single Non-PoE AC Power Supply Unit Dual Non-PoE AC Power Supply Units Single Non-PoE + PoE AC Power Supply Unit AR1220 × × √ × × AR1220V × × √ × √ AR2220 × × √ × × AR2240 × × √ √ × AR3260 × × √ √ × AR1220 √ × √ × × AR1220V × × √ × √ AR1220W × × √ × √ AR1220VW × × √ × √ Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Model&Version ARV 200R 002C 00 ARV 200R 002C 01 1 Version Matching Single DC Power Supply Unit Dual DC Power Supply Units Single Non-PoE AC Power Supply Unit Dual Non-PoE AC Power Supply Units Single Non-PoE + PoE AC Power Supply Unit AR2220 √ × √ × × AR2240 √ √ √ √ × AR3260 √ √ √ √ × AR1220 × × √ × × AR1220V × × √ × √ AR1220W × × √ × √ AR1220VW × × √ × √ AR2220 √ × √ × × AR2240 √ √ √ √ × AR3260 √ √ √ √ × AR1220 × × √ × × AR1220V × × √ × √ AR1220W × × √ × √ AR1220VW × × √ × √ AR1220L × × √ × × AR2220 √ × √ × × AR2240 √ √ √ √ × AR3260 √ √ √ √ × 1.3 Matching Between Cards and Software Versions This section describes the cards supported by AR routers, including SRUs, Ethernet LAN interface cards, WAN interface cards, voice interface cards, and xDSL/xPON interface cards. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 1 Version Matching Matching between physical cards and software versions Table 1-4 Matching between physical cards and software versions Model&Version ARV200R001C 00 ARV200R001C 01&ARV200R0 02C00 ARV200R002C 01 Issue 03 (2012-04-20) SIC WSIC XSIC voice card AR1220 √ × × × AR1220 √ × × √ AR2220 √ √ √ × AR2240 √ √ √ × AR3260 √ √ √ × AR1220 √ √ × × AR1220 √ √ × √ AR1220 √ √ × × AR1220 VW √ √ × √ AR2220 √ √ √ √ AR2240 √ √ √ √ AR3260 √ √ √ √ AR1220 √ √ × × AR1220 √ √ × √ AR1220 √ √ × × AR1220 VW √ √ × √ AR1220 √ √ × × AR2220 √ √ √ √ AR2240 √ √ √ √ AR3260 √ √ √ √ Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 1 Version Matching Matching between SRUs and software versions Table 1-5 Matching between SRUs and software versions Model&Version SRU WLAN Subcard ARV200R001 C00 AR1220 × × AR1220V × × AR2220 × × AR2240 √ × AR3260 √ × AR1220 × × AR1220V × × AR1220W × √ AR1220VW × √ AR2220 × × AR2240 √ × AR3260 √ × AR1220 × × AR1220V × × AR1220W × √ AR1220VW × √ AR1220L × × AR2220 × × AR2240 √ × AR3260 √ × ARV200R001 C01&ARV20 0R002C00 ARV200R002 C01 Matching between Ethernet LAN interface cards and software versions Table 1-6 Matching between Ethernet LAN interface cards and software versions Model&Version ARV200R001C0 Issue 03 (2012-04-20) 8FE1GE 24GE AR1220 × × AR1220V × × AR2220 √ √ Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 1 Version Matching Model&Version ARV200R001C0 1&ARV200R002 C00 ARV200R002C0 8FE1GE 24GE AR2240 √ √ AR3260 √ √ AR1220 √ × AR1220V √ × AR1220W √ × AR1220VW √ × AR2220 √ √ AR2240 √ √ AR3260 √ √ AR1220 √ × AR1220V √ × AR1220W √ × AR1220VW √ × AR1220L √ × AR2220 √ √ AR2240 √ √ AR3260 √ √ Matching between WAN cards and software versions Table 1-7 Matching between WAN cards and software versions Issue 03 (2012-04-20) Model& Version 2F 1E1 T1M/ 2E1 T1M (SIC 2E1 T1M (WS IC) 1E1T 1-F/ 2E1T 1-F 1S 2S 1C S15 GH SP +7 -T -S AR V20 0R0 01C 00 √ √ × × √ × × × × × × × × R1 22 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Model& Version AR V20 0R0 01C 01 Issue 03 (2012-04-20) 1 Version Matching 2F 1E1 T1M/ 2E1 T1M (SIC 2E1 T1M (WS IC) 1E1T 1-F/ 2E1T 1-F 1S 2S 1C S15 GH SP +7 -T -S R1 22 0V √ √ × × √ × × × × × × × × R2 22 √ √ × × √ × × × × × × × × R2 24 √ √ × × √ × × × × × × × × R3 26 √ √ × × √ × × × × × × × × R1 22 √ √ × √ √ √ √ √ √ × × × × R1 22 0V √ √ × √ √ √ √ √ √ × × × × R1 22 √ √ × √ √ √ √ √ √ × × × × R1 22 0V √ √ × √ √ √ √ √ √ × × × × R2 22 √ √ × √ √ √ √ √ √ √ × × × Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Model& Version AR V20 0R0 02C 00 Issue 03 (2012-04-20) 1 Version Matching 2F 1E1 T1M/ 2E1 T1M (SIC 2E1 T1M (WS IC) 1E1T 1-F/ 2E1T 1-F 1S 2S 1C S15 GH SP +7 -T -S R2 24 √ √ × √ √ √ √ √ √ √ × × × R3 26 √ √ × √ √ √ √ √ √ √ × × × R1 22 √ √ √ √ √ √ √ √ √ × × × × R1 22 0V √ √ √ √ √ √ √ √ √ × × × × R1 22 √ √ √ √ √ √ √ √ √ × × × × R1 22 0V √ √ √ √ √ √ √ √ √ × × × × R2 22 √ √ √ √ √ √ √ √ √ √ × × × R2 24 √ √ √ √ √ √ √ √ √ √ × × × R3 26 √ √ √ √ √ √ √ √ √ √ × × × Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 10 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Issue 03 (2012-04-20) 1 Version Matching Model& Version 2F 1E1 T1M/ 2E1 T1M (SIC 2E1 T1M (WS IC) 1E1T 1-F/ 2E1T 1-F 1S 2S 1C S15 GH SP +7 -T -S AR V20 0R0 02C 01 R1 22 √ √ √ √ √ √ √ √ √ × √ √ √ R1 22 0V √ √ √ √ √ √ √ √ √ × √ √ √ R1 22 √ √ √ √ √ √ √ √ √ × √ √ √ R1 22 0V √ √ √ √ √ √ √ √ √ × √ √ √ R1 22 0L √ √ √ √ √ √ √ √ √ × √ √ √ R2 22 √ √ √ √ √ √ √ √ √ √ √ √ √ R2 24 √ √ √ √ √ √ √ √ √ √ √ √ √ R3 26 √ √ √ √ √ √ √ √ √ √ √ √ √ Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 11 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 1 Version Matching Matching between voice cards and software versions Table 1-8 Matching between voice cards and software versions Model&Version 4FXS1FXO 2BST(SIC) 2BST(WSIC) 16/32/64/128 -Channel DSP Module ARV200 R001C00 AR122 × × × × AR122 0V √ × × × AR222 × × × × AR224 × × × × AR326 × × × × AR122 × × × × AR122 0V √ √ × × AR122 0W × × × × AR122 0VW √ √ × × AR222 √ √ × √ AR224 √ √ × √ AR326 √ √ × √ AR122 × × × × AR122 0V √ √ √ × AR122 0W × × × × AR122 0VW √ √ √ × ARV200 R001C01 ARV200 R002C00 Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 12 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Model&Version ARV200 R002C01 1 Version Matching 4FXS1FXO 2BST(SIC) 2BST(WSIC) 16/32/64/128 -Channel DSP Module AR222 √ √ √ √ AR224 √ √ √ √ AR326 √ √ √ √ AR122 × × × × AR122 0V √ √ √ × AR122 0W × × × × AR122 0VW √ √ √ × AR122 0L × × × × AR222 √ √ √ √ AR224 √ √ √ √ AR326 √ √ √ √ Matching between xDSL/xPON cards and software versions Table 1-9 Matching between xDSL/xPON cards and software versions Issue 03 (2012-04-20) Model&Versio ADSLA/M ADSL-B 4G.SHDSL 1PON VDSL AR V20 0R0 01C 00 AR1220 √ √ √ × × AR1220 √ √ √ × × AR2220 √ √ √ × × AR2240 √ √ √ × × AR3260 √ √ √ × × Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 13 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Model&Versio ADSLA/M ADSL-B 4G.SHDSL 1PON VDSL AR V20 0R0 01C 01 AR1220 √ √ √ × × AR1220 √ √ √ × × AR1220 √ √ √ × × AR1220 VW √ √ √ × × AR2220 √ √ √ × × AR2240 √ √ √ × × AR3260 √ √ √ × × AR1220 √ √ √ √ × AR1220 √ √ √ √ × AR1220 √ √ √ √ × AR1220 VW √ √ √ √ × AR2220 √ √ √ √ × AR2240 √ √ √ √ × AR3260 √ √ √ √ × AR1220 √ √ √ √ √ AR1220 √ √ √ √ √ AR1220 √ √ √ √ √ AR1220 VW √ √ √ √ √ AR1220 √ √ √ √ √ AR2220 √ √ √ √ √ AR2240 √ √ √ √ √ AR3260 √ √ √ √ √ AR V20 0R0 02C 00 AR V20 0R0 02C 01 Issue 03 (2012-04-20) 1 Version Matching Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 14 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 2 Chassis Chassis About This Chapter This section describes the characteristics, naming rules, appearance, structure, system performance, and technical specifications of the AR routers. 2.1 Introduction This section briefly describes the AR routers and the models available. 2.2 Naming Convention This section describes the naming conventions used when naming AR routers. 2.3 Device Structure This section describes the structure of the AR routers. 2.4 System Configuration 2.5 Physical Specifications Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 15 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 2 Chassis 2.1 Introduction This section briefly describes the AR routers and the models available. Description Huawei AR Enterprise Router (AR router for short) are the next-generation routers integrating data,voice, security, routing, switching, and virtual private network (VPN) functions. As an egress gateway for enterprises, the AR routers use the multi-core CPU processing capabilities and rapid expansibility. Models The AR routers offer the following models. Model AR1200 Characteristics AR1220 The AR1220 is 1 U high (1 U = 44.45 mm [1.75 in.]), uses a 60 W AC power supply unit installed in an open rack, and supports two SIC cards. The integrated SRU supports fixed 8FE interfaces and fixed 2GE electrical interfaces. NOTE l AR V200R001C00 uses the 54 W AC power supply unit installed in an open rack. l AR V200R001C01 and later versions use the 60 W AC power supply unit installed in an open rack. AR1220 l Compared with the AR1220, the AR1220V supports 32-channel voice and the PoE power supply unit can be installed on it. The last four FE interfaces (FE4-FE7) on the main control unit support the PoE function. l The silkscreen on the rear side of AR1220V chassis is AR1220V and a PoE power supply port is provided. AR1220 l Compared with the AR1220, the AR1220W supports the Wi-Fi function and external PoE power supply unit. The last four FE interfaces (FE4-FE7) on the main control unit support the PoE function. l The silkscreen on the rear side of AR1220W chassis is AR1220W and two antennas and a PoE power supply port are provided. AR1220 VW l Compared with the AR1220, the AR1220VW supports 32channel voice, Wi-Fi, and external PoE power supply unit. The last four FE interfaces (FE4-FE7) on the main control unit support the PoE function. l The silkscreen on the rear side of AR1220VW chassis is AR1220VW and two antennas and a PoE power supply port are provided. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 16 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Model 2 Chassis Characteristics AR2200 AR3200 AR2220 The AR2220 is 1 U high (1 U = 44.45 mm), uses a 150 W power supply unit, and supports four SIC cards and two WSIC cards. The integrated SRU supports fixed 3GE interfaces (including one combo interface). The backplane is in the middle of the chassis, and cards are installed on the front and rear sides of the backplane. AR2240 The AR2240 is 2 U high (1 U = 44.45 mm [1.75 in.]) and uses a 350 W pluggable power supply unit. The AR2240 has a backplane, front subcards, and rear subcards. The pluggable fan module uses frontaccess design. The AR2240 supports four SIC cards, two WSIC cards, and two XSIC cards. AR3260 The AR3260 is 3 U high (1 U = 44.45 mm [1.75 in.]) and uses a 350 W pluggable power supply unit. The AR3260 has a backplane, front subcards, and rear subcards. The pluggable fan module uses frontaccess design. The AR3260 supports four SIC cards, two WSIC cards, and four XSIC cards. NOTE l SIC: Service Interface Card. This is the smallest card supported by ARs. l WSIC: Wide SIC. The same height as a SIC, but twice the width. l XSIC: Extended SIC. Double the height and width of an XSIC and twice those of a SIC. l EXSIC: Extra-Extended SIC. Twice the height of a SIC, and four times the width of a SIC. NOTE In this document, AR1200 indicates AR1220, AR1220V, AR1220W, and AR1220VW. 2.2 Naming Convention This section describes the naming conventions used when naming AR routers. Figure 2-1 Naming convention 【AR】 【B1 B2 B3 B4】 【C1】 【-D1】 Example: AR1220 V Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 17 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 2 Chassis Table 2-1 Naming convention of AR routers Field Description B1 Product series code. AR routers includes series 1, 2 and 3. B2 Fixed as 2, indicating enterprise router. B3 Number of service card slots (dependent on B1): l When B1 is 1, B3 indicates the number of SIC cards. l When B1 is 2 or 3, B3 indicates the number of WSIC and XSIC cards. B4 The value is fixed as 0. C1 C1 contains one or two upper-case letters. l W: WLAN l V: voice l A: AC (This is the default configuration, so A is not contained in the product name) D1 l D: DC 2.3 Device Structure This section describes the structure of the AR routers. 2.3.1 AR1200 Series This section describes the structure of the AR1200. Appearance NOTE AR1220 has two models: AC model and DC model. The two models are identical in the front panels, but different in the power supply units at the rear of the chassis. Figure 2-2 and Figure 2-3 show front views of AR1200. Figure 2-2 AR1220, AR1220L and AR1220V front view 18 Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 18 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 2 Chassis Figure 2-3 AR1220W and AR1220VW front view 19 18 20 Figure 2-4, Figure 2-5, Figure 2-6, Figure 2-7, Figure 2-8 and Figure 2-9 show rear views of AR1200. Figure 2-4 AR1220 AC model rear view 15 14 13 12 21 10 Figure 2-5 AR1220 DC model rear view 15 Issue 03 (2012-04-20) 14 13 12 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 10 19 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 2 Chassis Figure 2-6 AR1220V rear view 15 14 13 12 11 10 Figure 2-7 AR1220W rear view 15 14 13 12 11 10 Figure 2-8 AR1220VW rear view 15 Issue 03 (2012-04-20) 14 13 12 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 11 10 20 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 2 Chassis Figure 2-9 AR1220L rear view 15 14 13 10 1: Pluggable card 2: ESD jack 3: Ground screw 7: Security lock 10: AC power switch 11: PoE port 13: Two Fixed GE 14: Mini USB interfaces on the panel interface 4: AC jack 12: Fixed 8FE interface on the panel 15: CON/AUX interface 18: USB interfaces NOTE After a 3G USB modem is inserted, install a protection cap on it, as shown in the following figure. 20: WLAN switch 19: Antenna 21: DC power jack Slot Distribution Figure 2-10 shows slot distribution on AR1200. NOTE l Two SIC slots can be combined into one WSIC slot by removing the guide rail. l Slots can be combined into one, but one slot cannot be divided into multiple slots. l After two slots are combined into one, the slot ID is the larger number of the two original slots. Figure 2-10 AR1200 slot distribution Device Model AR1200 Slot Combination NA NA 1(SIC) Two SIC slots are combined into one WSIC slot Front view Rear view Issue 03 (2012-04-20) Slot Distribution 2(SIC) 0(SRU) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 2(WSIC) 0(SRU) 21 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 2 Chassis As shown in Figure 2-10, the slots of AR1200 can be combined : Slot 1 and slot 2 are combined into new slot 2. 2.3.2 AR2200 Series This section describes the structure of the AR2200. Appearance Figure 2-11 and Figure 2-12 show front views of AR2200. Figure 2-11 AR2220 front view 10 16 17 13 18 14 15 Figure 2-12 AR2240 front view 10 10 2 8 Figure 2-13 and Figure 2-14 show rear views of AR2200. Figure 2-13 AR2220 rear view 3 2 Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 22 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 2 Chassis Figure 2-14 AR2240 rear view 23 1: Pluggable card 2: ESD jack 3: Ground screw 4: AC jack 6: Pluggable AC power supply unit 8: Pluggable fan module 9: SRU 10: AC power switch 13: Two Fixed GE 14: Mini USB interface 15: CON/AUX interfaces on the panel interface 17: GE optical/ electrical Combo interface 16: Micro SD card interface 18: USB interfaces NOTE After a 3G USB modem is inserted, install a protection cap on it, as shown in the following figure. NOTE The two power supply units of the AR2240 work in load balancing mode. Slot Distribution Figure 2-15 shows slot distribution on AR2200. NOTE l Two SIC slots can be combined into one WSIC slot by removing the guide rail. l Two SIC slots and one WSIC slot can be combined into one XSIC slot by removing the guide rail. l Two XSIC slots can be combined into one EXSIC slot by removing the guide rail. l Slots can be combined into one, but one slot cannot be divided into multiple slots. l After two slots are combined into one, the slot ID is the larger number of the two original slots. l In AR V200R002C00, a WSIC card can be inserted into an XSIC slot with a special component. The WSIC card is in the lower side of the slot and uses the XSIC slot ID as its own slot ID. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 23 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 2 Chassis Figure 2-15 AR2200 slot distribution Device Model Front view Slot Distribution 7(Power) Slot Combination NA 0(SRU) AR2220 Two SIC slots are combined into one WSIC slot Rear view 4(WSIC) 6(WSIC) 4(SIC) 3(SIC) 2(SIC) 1(SIC) 6(WSIC) 5(WSIC) 2(WSIC) 5(WSIC) Two WSIC slots are combined into one XSIC slot 6(XSIC) Front view AR2240 10(Power) 9(Power) 11(SRU) 5(XSIC) NA Two SIC slots are combined into one WSIC slot Rear view 4(SIC) 3(SIC) 2(SIC) 1(SIC) 6(WSIC) 5(WSIC) 8(XSIC) 4(WSIC) 6(WSIC) 2(WSIC) 5(WSIC) 8(XSIC) 7(XSIC) Two WSIC slots are combined into one XSIC slot 7(XSIC) 6(XSIC) 5(XSIC) 8(XSIC) 7(XSIC) Two XSIC slots are combined into one EXSIC slot 6(XSIC) 5(XSIC) 8(EXSIC) As shown in Figure 2-15, the slots of AR2200 can be combined as follows: AR2220: – Slot 1 and slot 2 are combined into new slot 2. – Slot 3 and slot 4 are combined into new slot 4. – New slot 2 and slot 5 are combined into new slot 5. – New slot 4 and slot 6 are combined into new slot 6. AR2240: – Slot 1 and slot 2 are combined into new slot 2. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 24 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 2 Chassis – Slot 3 and slot 4 are combined into new slot 4. – New slot 2 and slot 5 are combined into new slot 5. – New slot 4 and slot 6 are combined into new slot 6. – Slot 7 and slot 8 are combined into new slot 8. 2.3.3 AR3200 Series This section describes the structure of the AR3200. Appearance Figure 2-16 shows the front view of AR3260. Figure 2-16 AR3260 front view 10 10 2 8 Figure 2-17 shows the rear view of AR3260. Figure 2-17 AR3260 rear view 23 1: Pluggable card Issue 03 (2012-04-20) 2: ESD jack 3: Ground screw 4: AC jack Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 25 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6: Pluggable AC power supply unit 8: Pluggable fan module 9: SRU 2 Chassis 10: AC power switch NOTE The two power supply units of the AR3260 work in load balancing mode. Slot Distribution Figure 2-18 shows slot distribution on AR3260. NOTE l Two SIC slots can be combined into one WSIC slot by removing the guide rail. l Two SIC slots and one WSIC slot can be combined into one XSIC slot by removing the guide rail. l Two XSIC slots can be combined into one EXSIC slot by removing the guide rail. l Slots can be combined into one, but one slot cannot be divided into multiple slots. l After two slots are combined into one, the slot ID is the larger number of the two original slots. l In AR V200R002C00 and later versions, a WSIC card can be inserted into an XSIC slot. The WSIC card is in the lower side of the slot and uses the XSIC slot ID as its own slot ID. l MFS: Multiple Function Slot. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 26 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 2 Chassis Figure 2-18 AR3200 slot distribution Device Model AR3260 Front view Slot Distribution 12(Power) 11(Power) 14(MFS) 13(MFS) 15(SRU) Slot Combination Insert the SRU into slot 15. Two SIC slots are combined into one WSIC slot 4(SIC) 3(SIC) 2(SIC) 1(SIC) 6(WSIC) 5(WSIC) Rear view 4(WSIC) 6(WSIC) 2(WSIC) 5(WSIC) 8(XSIC) 7(XSIC) 10(XSIC) 9(XSIC) Two WSIC slots are combined into one XSIC slot 8(XSIC) 7(XSIC) 6(XSIC) 5(XSIC) 10(XSIC) 9(XSIC) 8(XSIC) 7(XSIC) 10(XSIC) 9(XSIC) Two XSIC slots are combined into one EXSIC slot 6(XSIC) 5(XSIC) 8(EXSIC) 10(EXSIC) As shown in Figure 2-18, the slots of AR3260 can be combined as follows: AR3260: – Slot 1 and slot 2 are combined into new slot 2. – Slot 3 and slot 4 are combined into new slot 4. – New slot 2 and slot 5 are combined into new slot 5. – New slot 4 and slot 6 are combined into new slot 6. – Slot 7 and slot 8 are combined into new slot 8. – Slot 9 and slot 10 are combined into new slot 10. – Slot 13 and slot 14 are combined into new slot 14, which is reserved for the slave main control board. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 27 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 2 Chassis 2.4 System Configuration Table 2-2 System configuration Model Processor Memory Flash Memory Micro SD Card AR1200 Series 2-core: 500 MHz 512 MB 256 MB AR2220 4-core: 600 MHz 2 GB 16 MB 2 GB AR2240 8-core: 600 MHz 2 GB 16 MB 2 GB AR3260 12-core: 750 MHz 2 GB 16 MB 2 GB 2.5 Physical Specifications Table 2-3 Physical specifications Item Description Dimensions (width x depth x height) l Without rack-mounting ear: – AR1200: 390.0 mm x 220.0 mm x 44.5 mm (15.35 in. x 8.66 in. x 1.75 in.) – AR2220: 442.0 mm x 420.0 mm x 44.5 mm (17.4 in. x 16.54 in. x 1.75 in.) – AR2240: 442.0 mm x 470.0 mm x 88.1 mm (17.4 in. x 18.5 in. x 3.47 in.) – AR3260: 442.0 mm x 470.0 mm x 130.5 mm (17.4 in. x 18.5 in. x 5.14 in.) l With rack-mounting ear: – AR1200: 482.6 mm x 220.0 mm x 44.5 mm (19 in. x 8.66 in. x 1.75 in.) – AR2220: 482.6 mm x 420.0 mm x 44.5 mm (19 in. x 16.54 in. x 1.75 in.) – AR2240: 482.6 mm x 470.0 mm x 88.1 mm (19 in. x 18.5 in. x 3.47 in.) – AR3260: 482.6 mm x 470.0 mm x 130.5 mm (19 in. x 18.5 in. x 5.14 in.) Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 28 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Item Maximum power consumption 2 Chassis Description Full configuration l AR1200: 52 W l AR2220: 95 W l AR2240: 180 W l AR3260: 270 W Empty chassis l AR1200: 33.3 W l AR2220: 65.1 W l AR2240: 114.9 W l AR3260: 163.2 W Weight Full configuration l AR1200: 3.60 kg (7.94 lb) l AR2220: 8.45 kg (18.63 lb) l AR2240: 19.30 kg (42.56 lb) l AR3260: 25.65 kg (56.56 lb) Empty chassis l AR1200: 2.90 kg (6.39 lb) l AR2220: 4.95 kg (10.91 lb) l AR2240: 8.85 kg (19.51 lb) l AR3260: 11.00 kg (24.26 lb) Operating temperature 0°C to 40°C (0°F to 104°F) Relative humidity 5% RH to 90% RH, non-condensing Altitude Long-term operating altitude Below 4000 m (13123.2 ft.) Storage altitude Below 4000 m (13123.2 ft.) Rated voltage 100 V AC to 240 V AC, 50/60Hz Maximum voltage 85 V AC to 264 V AC, 47/63Hz AC input voltage Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 29 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 3 Power Supply Units Power Supply Units About This Chapter This section describes the power supply units supported by the AR routers. CAUTION l Power off the AR routers before removing or performing maintenance on the power supply units. l To power off the AR routers , power off all its power supply units. 3.1 Power Supply Configuration This section describes the configurations of power supply units on the AR routers. 3.2 Power Supply Unit Connection Layouts This section illustrates the connection between each power supply unit and the motherboard. 3.3 HW-100-48AC14D This section describes the HW-100-48AC14D power supply unit, including the naming convention, functions, appearance, and technical specifications. 3.4 PWR350A This section describes the PWR350A power supply unit, including the naming convention, functions, appearance, and technical specifications. 3.5 PWR350D This section describes the PWR350D power supply unit, including the naming convention, functions, appearance, and technical specifications. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 30 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 3 Power Supply Units 3.1 Power Supply Configuration This section describes the configurations of power supply units on the AR routers. Table 3-1 describes the power supply units supported by each model. Table 3-1 Power supply units supported by each model Power Supply Unit Description Installation Maintenance 60 W AC power supply unit in an open rack AC power supply unit fixed in the chassis Fixed in the chassis, does not need to be connected to the chassis using cables. Maintain together with the chassis. 3.3 HW-100-48AC14D External PoE AC power supply unit Connected to the PoE port at the back of the chassis using its own power cable. Maintain independently from the chassis. PWR150A AC power supply unit Inserted into a power supply slot. The device supports only one power supply unit. Maintain together with the chassis. 3.4 PWR350A AC power supply unit Inserted into a power supply slot. The device supports two power supply units. Front-access design, removable. 150 W DC Power Supply DC power supply unit Inserted into a power supply slot. The device supports only one power supply unit. Maintain together with the chassis. NOTE l AR V200R001C00 uses the 54 W AC power supply unit installed in an open rack. l AR V200R001C01 and later versions use the 60 W AC power supply unit installed in an open rack. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 31 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 3 Power Supply Units Power Supply Unit Description Installation Maintenance 3.5 PWR350D DC power supply unit Inserted into a power supply slot. The device supports two power supply units. Front-access design, removable. 3.2 Power Supply Unit Connection Layouts This section illustrates the connection between each power supply unit and the motherboard. 3.2.1 Single DC Power Supply Unit Figure 3-1 shows the layout of single DC power supply unit connection to motherboard. Figure 3-1 Layout of single DC power supply unit connection to motherboard 12V GND Motherboard PWR NEG 1. NEG: Power cable RTN 2. RTN: Power ground cable 3. GND: Grounding After the DC power is transmitted to the PWR module, the PWR module outputs 12 V voltage, and then the motherboard provides power for the entire device. 3.2.2 Two DC Power Supply Units Figure 3-2 shows the layout of dual DC power supply unit connection to motherboard. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 32 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 3 Power Supply Units Figure 3-2 Layout of dual DC power supply unit connection to motherboard 12V GND Motherboard PWR1 PWR2 NEG RTN 1. NEG: Power cable NEG RTN 2. RTN: Power ground cable 3. GND: Grounding After the DC power is transmitted to the PWR module, the PWR module outputs 12 V voltage, and then the motherboard provides power for the entire device. 3.2.3 Single Non-PoE AC Power Supply Unit Figure 3-3 shows the layout of single non-PoE AC power supply unit connection to motherboard. Figure 3-3 Layout of single non-PoE AC power supply unit connection to motherboard 12V GND Motherboard PWR L N PGND 1. L: Live wire 2. N: Neutral wire 3. PGND: PGND wire 4. GND: Grounding After the AC power is transmitted to the PWR module, the PWR module outputs 12 V voltage, and then the motherboard provides power for the entire device. 3.2.4 Two Non-PoE AC Power Supply Units Figure 3-4 shows the layout of dual non-PoE AC power supply unit connection to motherboard. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 33 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 3 Power Supply Units Figure 3-4 Layout of dual non-PoE AC power supply unit connection to motherboard 12V GND Motherboard PWR1 PWR2 L N PGND 1. L: Live wire L N PGND 2. N: Neutral wire 3. PGND: PGND wire 4. GND: Grounding After the AC power is transmitted to the PWR module, the PWR module outputs 12 V voltage, and then the motherboard provides power for the entire device. 3.2.5 Single Non-PoE + PoE AC Power Supply Unit Figure 3-5 shows the layout of single non-PoE + PoE AC power supply unit connection to motherboard. Figure 3-5 Layout of single non-PoE + PoE AC power supply unit connection to motherboard -53V RTN PoE Port (FE4~FE7) 12V GND -53V RTN PSE on the SRU Motherboard PWR PWR L N PGND L N PGND 1. L: Live wire 2. N: Neutral wire 3. PGND: PGND wire 4. GND: Grounding 5. RTN: Power ground cable The non-PoE AC power supply unit and PoE AC power supply unit are independent of each other: Non-PoE AC power supply unit: After the AC power is transmitted to the PWR module, the PWR module outputs 12 V voltage, and then the motherboard provides power for the entire device. PoE AC power supply unit: After the AC power is transmitted to the PoE module, the PoE module outputs -53 V voltage, and then the PSE on the SRU provides power for the powered devices (PDs) connected to the PoE interface. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 34 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 3 Power Supply Units 3.3 HW-100-48AC14D This section describes the HW-100-48AC14D power supply unit, including the naming convention, functions, appearance, and technical specifications. Naming Convention Figure 3-6 illustrates the naming convention of the HW-100-48AC14D. Figure 3-6 HW-100-48AC14D naming convention HW-100-48AC14D （1） （2） （3） （4） （5） Number Description (1) Product brand (2) Output power parameters l 100: The output power is 100 W. l 48: The output voltage is 48 V. (3) Power supply unit type l A (Alternate): AC/DC power supply unit l D (Direct): DC/DC power supply unit (4) Socket type l C14 is a type of socket. (5) D (Desk), indicating the desktop power supply. Functions The HW-100-48AC14D uses 90 V AC-264 V AC input power, and provide 48 V/100 W output power when no fan is used. Table 3-2 describes the protection functions provided by the HW-100-48AC14D. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 35 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 3 Power Supply Units Table 3-2 Protection functions of the HW-100-48AC14D Item Input protecti on Output protecti on Minimu m Value Typical Value Maximu m Value Remarks Input undervolta ge protection 62 V Input voltage can be restored to the normal range automatically. Input undervolta ge recovery 80 V Hysteresis is not smaller than 5 V. Output overvoltag e protection 51 V 58 V Output voltage can be restored to the normal range automatically. Output overcurrent protection 2.5 A 3A 3.5 A Output current can be restored to the normal range automatically. Output shortcircuit protection Output short-circuit can be recovered automatically. When temperature exceeds the upper limit, the power supply unit automatically shuts down to avoid permanent damage. No smoke will be generated. Overheating protection Temperature is reduced below 55°C (131°F). Appearance Figure 3-7 shows the appearance of the HW-100-48AC14D. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 36 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 3 Power Supply Units Figure 3-7 Appearance of the HW-100-48AC14D Table 3-3 describes meanings of the indicators. Table 3-3 Description of the HW-100-48AC14D indicators Indicator Color Description Power indicator Blue If the indicator is steady on, the output power is in the normal range. If the indicator is off, the power supply unit does not have output power. Technical Specifications Table 3-4 describes the technical specifications of the HW-100-48AC14D. Table 3-4 Technical specifications of the HW-100-48AC14D Issue 03 (2012-04-20) Item Specification Dimensions (width x depth x height) 72 mm x 171 mm x 40 mm (2.83 in. x 6.73 in. x 1.57 in.) Weight 0.65 kg (1.5 lb) AC input voltage 90 V AC to 264 V AC; typical: 110 V AC/220 V AC AC input frequency 47 Hz to 63 Hz; typical: 50 Hz/60 Hz Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 37 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 3 Power Supply Units Item Specification Rated operating voltage 100 V AC to 240 V AC; typical: 110 V AC/220 V AC Rated output current 2.08 A Rated output voltage 48 V Output power 100 W Operating temperature 0°C to 40°C (0°F to 104°F) Humidity 20% RH to 80% RH Altitude 4000 m (13123.2 ft.) 3.4 PWR350A This section describes the PWR350A power supply unit, including the naming convention, functions, appearance, and technical specifications. Naming Convention Figure 3-8 illustrates the naming convention of the PWR350A. Figure 3-8 PWR350A naming convention PWR350A （1） （2） （3） Number Description (1) Power supply unit (2) Output power parameters l 350: The output power is 350 W. (3) Powering mode l A (Alternate): alternating current Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 38 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 3 Power Supply Units Functions The PWR350A uses 90 V AC-290 V AC input power, and provides 12 V/350 W output power. The PWR350A has a fan. Table 3-5 describes the protection functions of the PWR350A. Table 3-5 Protection functions of the PWR350A Item Input protectio Output protectio Minimu m Value Typical Value Maximu m Value Remarks Input undervolta ge protection 75 V Input voltage can be restored to the normal range automatically, and hysteresis is 5 V or less. Input overvoltag 305 V 325 V Input voltage can be restored to the normal range automatically, and hysteresis is 5 V or less. Input overcurren t protection The AC input power lines (L and N) have fuses. Output overvoltag protection 14 V 16 V Output overcurren t protection 120% x 29.2 A 150% x 29.2 A Output shortcircuit protection Output short-circuit can be recovered automatically. 75°C (167°F) When temperature exceeds the upper limit, the power supply unit automatically shuts down to avoid permanent damage. When temperature is restored to the normal range, the power supply unit restarts automatically. Overheating protection Appearance Figure 3-9 shows the appearance of the PWR350A. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 39 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 3 Power Supply Units Figure 3-9 Appearance of the PWR350A 2. Switch 1. Handle 3. Indicator 4. AC jack Table 3-6 describes the meanings of the PWR350A indicators. Table 3-6 Description of the PWR350A indicators Indicator Color Description Power indicator (STATUS) Red and green If the indicator is steady green, the input power is in the normal range. If the indicator blinks alternately between red and green, the output power is out of range, for example, when an overvoltage, overcurrent, or short circuit event occurs. In these events, the power supply unit goes into hiccup protection mode. Technical Specifications Table 3-7 describes the technical specifications of the PWR350A. Table 3-7 Technical specifications of the PWR350A Issue 03 (2012-04-20) Item Specification Dimensions (width x depth x height) 201.0 mm x 260.5 mm x 38.5 mm (7.91 in. x 10.26 in. x 1.52 in.) Weight 1.45 kg (3.2 lb) AC input voltage 90 V AC to 290 V AC; typical: 110 V AC/220 V AC AC input frequency 47 Hz to 63 Hz; typical: 50 Hz/60 Hz Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 40 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Item Specification Input current 5A Rated output voltage 12 V DC Output voltage range 11.64 V DC to 12.36 V DC Output power 350 W Operating temperature -25°C to 60°C (-80°F to 140°F) Humidity 5% RH to 95% RH, non-condensing Altitude 4000 m (13123.2 ft.) 3 Power Supply Units The operating temperature is significantly reduced when at altitudes between 3000 (9842.4 ft.)and 4000 m (13123.2 ft.). The operating temperature drops 1°C (33.8°F)for every 200 m (656.16 ft.)increase in altitude. 3.5 PWR350D This section describes the PWR350D power supply unit, including the naming convention, functions, appearance, and technical specifications. Naming Convention Figure 3-10 illustrates the naming convention of the PWR350D. Figure 3-10 PWR350D naming convention PWR350D （1） （2） （3） Number Description (1) Power supply unit (2) Output power parameters l 350: The output power is 350 W. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 41 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description (3) 3 Power Supply Units Powering mode l D (Direct): direct current Functions The PWR350D provides +12 V DC power. It has the following functions: EMC filtering, surge protection, and short circuit protection. Various alarms, for example, the alarm triggered when there is no power input, the alarm for the air breaker status, the alarm for ineffective surge protection, and the alarm for undervoltage input. Appearance Figure 3-11 shows the appearance of the PWR350D. Figure 3-11 Appearance of the PWR350D 1. Handle 2. Switch 3. Indicator 4. DC jack Table 3-8 describes the meanings of the PWR350D indicators. Table 3-8 Description of the PWR350D indicators Name Status Description STATUS Off l The input power is out of range, for example, no DC input power, DC input overvoltage, and DC input undervoltage. l The output power is out of range, for example, undervoltage or overtemperature occurs. Issue 03 (2012-04-20) Green The DC input power is within range. Blinking green The output power is out of range, for example, overvoltage, overcurrent, and short circuit occurs. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 42 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 3 Power Supply Units Technical Specifications Table 3-9 describes the technical specifications of the PWR350D. Table 3-9 Technical specifications of the PWR350D Item Specification Dimensions (width x depth x height) 201.0 mm x 240.0 mm x 40.0 mm (7.91 in. x 9.45 in. x 1.57 in.) Weight ≤ 0.8 kg (1.77 lb) Rated input voltage -60 V DC to -48 V DC Input voltage range -72 V DC to -38.4 V DC Rated output voltage 12 V Output power 350 W Long-term operating temperature -25°C to 45°C (-80°F to 113°F) Humidity 5% RH to 95% RH Altitude 4000 m (13123.2 ft.) The operating temperature is significantly reduced when at altitudes between 3000 (9842.4)and 4000 m (13123.2 ft.). The operating temperature drops 1°C (33.8°F) for every 200 m (656.16 ft.) increase in altitude. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 43 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 4 Heat Dissipation System Heat Dissipation System About This Chapter This section describes the heat dissipation system of the AR router. The fan module of the AR router is described as follows: The fan module of the AR1200 and AR2220 is located on the right side in the chassis. – The fan module dimensions of the AR1200 are 40 mm [1.58 in.] (width) x 20 mm [0.79 in.] (depth). – The fan module dimensions of the AR2220 are 40 mm [1.58 in.] (width) x 20 mm [0.79 in.] (depth). The fan module of the AR2240 is 2 U high. It is pluggable and uses front-access design. The fan module of the AR3260 is 3 U high. It is pluggable and uses front-access design. 4.1 Heat Dissipation Process The AR routers heat dissipation system uses fans to create a left-to-right air channel. 4.2 AR2240 Fan Module The AR2240 fan module is 2 U high, pluggable and uses front-access design. 4.3 AR3260 Fan Module The fan module of the AR3260 is 3 U high. It is pluggable and uses front-access design. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 44 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 4 Heat Dissipation System 4.1 Heat Dissipation Process The AR routers heat dissipation system uses fans to create a left-to-right air channel. NOTE The heat dissipation system ensures that the AR routers operates at a normal temperature. For temperature requirements, see 2.5 Physical Specifications. Figure 4-1 shows air circulation through the AR1200 chassis. Figure 4-1 Air circulation through the AR1200 chassis Figure 4-2 shows air circulation through the AR2220 chassis. Figure 4-2 Air circulation through the AR2220 chassis Figure 4-3 shows air circulation through the AR2240 chassis. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 45 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 4 Heat Dissipation System Figure 4-3 Air circulation through the AR2240 chassis Figure 4-4 shows air circulation through the AR3260 chassis. Figure 4-4 Air circulation through the AR3260 chassis 4.2 AR2240 Fan Module The AR2240 fan module is 2 U high, pluggable and uses front-access design. Functions The fan module is located on the right side of the AR2240 chassis for heat dissipation and ventilation. If a single fan failed, the device will be overheated and its performance is then affected. When this occurs, replace the entire fan frame immediately. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 46 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 4 Heat Dissipation System Structure The fan module of the AR2240 consists of a fan tray, five 12 V fans with dimensions 80 mm [3.16 in.] (width) x 25 mm [0.99 in.] (depth), and a fan control board (FCB). Panel Figure 4-5 shows the panel of the fan module. Figure 4-5 Fan module panel of the AR2240 Table 4-1 Description of the fan module indicator Indicator Color Description STATUS Red and green If the indicator blinks green once 2s (0.5 Hz), the fan module is operating properly. If the indicator blinks green once 0.25s (4 Hz), the fan module cannot communicate with the device. If the indicator is steady red, the fan module is faulty and an alarm is generated. Technical Specifications Table 4-2 describes the technical specifications of the fan module on the AR2240. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 47 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 4 Heat Dissipation System Table 4-2 Technical specifications of the fan module Item Specification Dimensions (width x depth x height) 27.4 mm x 478.6 mm x 84.3 mm (1.08 in. x 18.85 in. x 3.32 in.) Weight 1.05 kg (2.32 lb) Maximum power consumption 60 W Maximum wind pressure 150 Pa Maximum wind rate 400 CFM Maximum noise 61 dB Operating voltage of a fan 7 V DC to 15 V DC 4.3 AR3260 Fan Module The fan module of the AR3260 is 3 U high. It is pluggable and uses front-access design. Functions The fan module is located on the right side of the AR3260 chassis for heat dissipation and ventilation. If a single fan failed, the heat dissipation for the AR3260 will be affected. When this occurs, replace the entire fan frame immediately. Structure The fan module of the AR3260 consists of a fan tray, three 12 V fans with dimensions 120 mm (width) x 25 mm (depth), and a fan control board (FCB). Panel Figure 4-6 shows the panel of the fan module. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 48 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 4 Heat Dissipation System Figure 4-6 Fan module panel of the AR3260 Table 4-3 Description of the fan module indicator Indicator Color Description STATUS Red and green If the indicator blinks green once 2s (0.5 Hz), the fan module is operating properly. If the indicator blinks green once 0.25s (4 Hz), the fan module cannot communicate with the device. If the indicator is steady red, the fan module is faulty and an alarm is generated. Technical Specifications Table 4-4 describes the technical specifications of the fan module on the AR3260. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 49 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 4 Heat Dissipation System Table 4-4 Technical specifications of the fan module Issue 03 (2012-04-20) Item Specification Dimensions (width x depth x height) 27.4 mm x 478.6 mm x 125.7 mm Weight 1.45 kg Maximum power consumption 90 W Maximum wind pressure 226 Pa Maximum wind rate 543 CFM Maximum noise 66.8 dB Operating voltage of a fan 7 V DC to 15 V DC Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 50 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Cards About This Chapter This chapter describes the cards supported by the AR routers. 5.1 Introduction This section describes the cards supported by the AR routers, including card types, relationships between cards, the interface numbering scheme, and card dimensions. 5.2 SRU The SRU is the main control board on the AR2240 or AR3260 and is pluggable. 5.3 WLAN Subcard WLAN subcards are Wi-Fi modules. 5.4 Ethernet LAN Interface Card This section describes the types, functions, applications, appearance, interfaces, and technical specifications of the Ethernet LAN interface card. 5.5 WAN Interface Card This section describes the types, functions, applications, appearance, interfaces, and technical specifications of the WAN interface card. 5.6 Voice Interface Card This section describes the types, functions, applications, appearance, interfaces, and technical specifications of the voice interface card. 5.7 xDSL/xPON Interface Card This section describes the types, functions, applications, appearance, interfaces, and technical specifications of the xDSL/xPON interface card. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 51 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards 5.1 Introduction This section describes the cards supported by the AR routers, including card types, relationships between cards, the interface numbering scheme, and card dimensions. 5.1.1 Relationships Between Cards This section describes the relationships between the cards supported by the AR routers. Figure 5-1,Figure 5-2,Figure 5-3 and Figure 5-4 illustrates the relationships between the cards supported by the AR routers. NOTE l On the AR1200, the backplane is at the bottom of the chassis, and cards are installed on the backplane. l On the AR2220, the backplane is in the middle of the chassis, cards are installed on the rear side of the backplane, and a power supply module is installed on the front side of the backplane. l On the AR2240, the backplane is in the middle of the chassis, cards are installed on the front and rear sides of the backplane, and a power supply unit is installed on the front side of the backplane. l On the AR3260, the backplane is in the middle of the chassis, cards are installed on the front and rear sides of the backplane, and a power supply unit is installed on the front side of the backplane. Figure 5-1 Relationships between cards on the AR1200 SRU Fan Service card Backplane Service card Power Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 52 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Figure 5-2 Relationships between cards on the AR2220 SRU Service card Backplane Fan Service card Power Figure 5-3 Relationships between cards on the AR2240 SRU Service card Power Backplane Fan Service card Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 53 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Figure 5-4 Relationships between cards on the AR3260 SRU Service card Power Backplane Fan Service card 5.1.2 Interface Numbering This section describes the interface numbering scheme on the AR routers. On the AR routers, interfaces are numbered in the format of slot ID/subcard ID/interface sequence number. Slot ID The slot ID specifies the ID of the slot where a card resides. – The SRU of the AR1200 and 2220 is integrated with the chassis, so the slot ID is fixed as 0. – When slots need to be combined into one slot, the greater slot ID is used as the new slot ID. For example, when slot 1 and slot 2 are combined, slot ID 2 is used as the new slot ID. Subcard ID The subcard ID specifies the ID of a subcard. The cards of AR routers series routers do not support subcards. Therefore, the subcard ID of the AR routers is fixed as 0. Interface sequence number The interface sequence number indicates the number of each interface on a card. – There is only one row of interfaces on the interface card. These interfaces are numbered from left to right starting with 0. – There are two rows of interfaces on the interface card. These interfaces are numbered from bottom to top and left to right starting with 0. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 54 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards 11 10 5.1.3 Card Dimensions This section explains the conventions for measuring cards and lists the dimensions of SIC, WSIC, XSIC and EXSIC card. Figure 5-5 illustrates the dimensions of a card. Figure 5-5 Card dimensions description Height Depth Width NOTE The card dimensions are defined as follows: l Depth: the distance between the handle and the end of Printed Circuit Board (PCB) l Width: the longest distance between the tops of two handles l Height: the height of the ejector lever Figure 5-6 shows the cards supported by the AR routers and Table 5-1 lists the card dimensions. Figure 5-6 Card appearances SIC WSIC XSIC EXSIC Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 55 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Table 5-1 Card dimensions Card Type Dimensions (Depth x Width x Height) SIC card 223.5 mm x 100.1 mm x 19.82 mm (8.8 in. x 3.94 in. x 0.78 in.) WSIC card 223.5 mm x 201 mm x 19.82 mm (8.8 in. x 7.92 in. x 0.78 in.) XSIC card 223.5 mm x 201 mm x 40.14 mm (8.8 in. x 7.92 in. x 1.58 in.) EXSIC card 223.5 mm x 402.8 mm x 40.14 mm (8.8 in. x 15.83 in. x 1.58 in.) SRU 270.85 mm x 402.8 mm x 40.14 mm (10.67 in. x 15.83 in. x 1.58 in.) 5.2 SRU The SRU is the main control board on the AR2240 or AR3260 and is pluggable. The SRUs are classified into SRU40 and SRU80. NOTE l AR V200R001C00: SRU40 can only be used on AR2240 and SRU80 can only be used on AR3260. l AR V200R001C01 and later versions: SRU40 and SRU80 can be used on both AR2240 and AR3260. Table 5-2 shows the comparison between the SRU40 and SRU80. Table 5-2 Comparison between the SRU40 and SRU80 Card Name Performance Function SRU40 600 MHZ CPU with eight kernels Traffic management is not supported. SRU80 750 MHZ CPU with 12 kernels Traffic management is supported. 5.2.1 Functions and Applications Functions The SRU integrates the control and management functions and provides the control plane, management plane, and switching plane for the system. Issue 03 (2012-04-20) Control plane: provides functions such as protocol processing, service processing, route calculation, forwarding control, service scheduling, traffic statistics, and system security. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 56 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Management plane: provides functions such as system monitoring, environment monitoring, log and alarm processing, system loading, and system upgrade. Switching plane: provides high-speed and non-blocking data channels to implement service switching between service modules. The SRU consists of the following modules: Control module: functions as the control and management plane for the system, implementing protocol processing, route calculation, forwarding control, system management, and system security. Switching module: functions as the service switching plane and provides high-speed service channels to implement service switching, including voice switching, data switching, and conversion between voice and data services. Power supply module: conducts power from backplane to card. Clock module: provides synchronous clock signals for voice cards and local voice switching. NOTE l The SRU stores configuration data, startup files, upgrade software, and logs. l The SRU is hot swappable. Applications The AR2240,AR3260 must have an SRU installed. The AR2240,AR3260 can operate with one SRU installed and with two SRUs installed in future. When one SRU is installed, it can be inserted into the following slot: – Slot 11 of the AR2240 – Slot 15 of the AR3260 For slot distribution on the AR2240, see Figure 2-15. For slot distribution on the AR3260, see Figure 2-18. 5.2.2 Panel and Interfaces NOTE The SRU40 and SRU80 panels are identical except for having different silkscreens. Figure 5-7 shows the appearance of the SRU. Figure 5-7 Appearance of the SRU 1 2 Issue 03 (2012-04-20) 6556 7 8 7 8 7 8 9 10 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 11 57 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Buttons and Indicators on the Panel Table 5-3 describes the buttons and indicators on the SRU panel. Table 5-3 Buttons and indicators on the SRU panel Number Indicator Color Description SYS Green If the indicator blinks once 2s (0.5 Hz), the system is running properly. If the indicator blinks once 0.25s (4 Hz), the system is powering on or restarting. Red If the indicator is red, a fault that affects services occurs and cannot be rectified automatically. The fault needs to be rectified manually. Off If the indicator is off, the software is not running or is being reset. ACT (active/ standby status indicator) Green If the indicator is green, the SRU is in active state. Micro SD Green If the indicator is off, the SRU is in standby state. If the indicator is steady on, a link has been established. If the indicator is blinking, data is being transmitted or received. If the indicator is off, there is no micro SD card. ACT (USB) Red and green If the indicator is green, devices have been deployed by using the USB disk. If the indicator blinks green, data is being read from the USB disk. If the indicator is red, the device cannot be correctly connected to the NMS or cannot be registered with the NMS. If the indicator blinks red, an error occurs when configuration files are being executed or data is being read from the USB disk. If the indicator is off, the USB disk is not inserted, the USB interface fails, or the indicator fails. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 58 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Number Indicator Color Description 5 and 6 SFP interface indicators: l The LINK indicator is in green. l The ACT indicator is in yellow. Green If the indicator is steady on, a link has been established. GE interface indicators: l The LINK indicator is in green. l The ACT indicator is in yellow. Green MiniUSB EN Green 7 and 8 If the indicator is off, no link is established. Yellow If the indicator is blinking, data is being transmitted or received. If the indicator is off, no data is being transmitted or received. If the indicator is steady on, a link has been established. If the indicator is off, no link is established. Yellow If the indicator is blinking, data is being transmitted or received. If the indicator is off, no data is being transmitted or received. If the indicator is steady on, the port is used as a MiniUSB port. If the indicator is off, the port does not function as a MiniUSB port. 10 CON/AUX EN NOTE l Either the CON/AUX port or the MiniUSB port can be used at a time. Green If the indicator is steady on, the port is used as a CON/AUX port. If the indicator is off, the port does not function as a CON/AUX port. l By default, the port is used as the CON/AUX port. The EN indicator is green no matter whether a cable is installed. 11 Issue 03 (2012-04-20) RST CAUTION The Reset button is used for resetting cards manually. Resetting a card will cause service interruption; therefore, carefully verify the issue before you reset a card. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 59 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Interfaces Table 5-4 describes the types and functions of interfaces on the SRU. Table 5-4 Types and functions of interfaces on the SRU Letter in Figure 5-7 Name Qua ntit Description Cable Type Micro SD card The micro SD card is used to store system data. MiniSD card l SD1: built-in, default setting l SD0: installed in a reserved SD card on the front panel, an external extended card Issue 03 (2012-04-20) USB The USB disk is used to deploy devices. USB disk GE optical/ electrical Combo interface The SFP interface is used to receive and send services. SFP optical module and 6.6 Optical Fiber GE electrical interface An Ethernet interface is connected to the network interface of a configuration terminal or network management workstation for on-site or remote configuration. An Ethernet interface is also used to receive and send services. 6.5 Network Cable e and f Console interface, including the MiniUSB and RJ45 interface A console interface is connected to the console for on-site configuration. The MiniUSB and RJ45 interface cannot be used simultaneously. By default, an RJ45 interface is connected to the console for onsite configuration. MiniUSB cable and 6.4 Console Cable Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 60 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Interface Attributes Table 5-5 Attributes of 10BASE-TX/100BASE-TX electrical interfaces Item Description Connector type RJ45 Interface attribute MDI/MDIX NOTE l The interfaces of most network cards are medium dependent interfaces (MDIs). l MDIX interfaces are usually used on hubs or LAN switches. Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP Network layer protocol IP Table 5-6 Attributes of 1000BASE-T electrical interfaces Item Description Connector type RJ45 Interface attribute MDI/MDIX NOTE l The interfaces of most network cards are medium dependent interfaces (MDIs). l MDIX interfaces are usually used on hubs or LAN switches. Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP Network layer protocol IP Table 5-7 Attributes of the console interface Issue 03 (2012-04-20) Item Description Connector type RJ45 Standards compliance RS232 Operating mode Full duplex Universal Asynchronous Receiver/ Transmitter (UART) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 61 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Item Description Data equipment type Data Circuit-terminating Equipment (DCE) Table 5-8 Attributes of the MiniUSB-B interface Item Description Connector type MiniUSB-B, angle Standards compliance USB1.0 Operating mode Device Table 5-9 Attributes of the USB-A interface Item Description Connector type USB-A Standards compliance USB2.0, compatible with USB1.0 and USB1.1 Operating mode Host 5.2.3 Technical Specifications Table 5-10 describes the technical specifications of the SRU. Table 5-10 Technical specifications of the SRU Item Specification Dimensions (depth x width x height) 270.85 mm x 402.8 mm x 40.14 mm (10.67 in. x 15.83 in. x 1.58in.) Maximum power consumption 85.44 W Weight 2.1 kg (4.63 lb) 5.3 WLAN Subcard WLAN subcards are Wi-Fi modules. 5.3.1 Functions and Applications Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 62 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Functions WLAN subcards provide Wi-Fi interfaces. Wi-Fi interfaces comply with IEEE 802.11n, 802.11g, and 802.11b, and each of these interfaces provides a maximum of 300 Mbit/s transmission rate. WLAN subcards provide a high wireless performance and reliability, and large coverage scope using the multiple-input and multiple-output (MIMO) technology. WLAN subcards support 64/128/152-bit WEP encryption, WPA/WPA2 encryption, and WPA-PSK/WPA2-PSK encryption to provide secure data transmission. Applications A WLAN subcard has a dedicated WLAN slot on the AR routers. 5.3.2 Technical Specifications Table 5-11 describes the technical specifications of the WLAN subcard. Table 5-11 Technical specifications of the WLAN subcard Item Specification Maximum power consumption 7.24 W 5.4 Ethernet LAN Interface Card This section describes the types, functions, applications, appearance, interfaces, and technical specifications of the Ethernet LAN interface card. 5.4.1 8FE1GE-8-Port 100BASE-RJ45 and 1-Port 1000BASE-RJ45 L2/ L3 Ethernet Interface Card The 8FE1GE is the 8-port 100M+1-port 1000M Ethernet electrical interface card (RJ45). It implements the 9-channel Ethernet Layer 2 and Layer 3 switching functions. Functions and Applications Functions The 8FE1GE provides eight FE electrical interfaces and one GE electrical interface to implement data access and line-speed switching. When category 5 twisted pairs (straight-through cables or crossover cables) are used, the maximum transmission distance is 100 meters. When category 5 twisted pairs (straight-through cables or crossover cables) are used, 100 Mbit/s line-speed forwarding is supported between the eight FE interfaces. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 63 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards The eight FE interfaces work at 10 Mbit/s or 100 Mbit/s, in auto-sensing mode. The GE interface works at 10/100/1000 Mbit/s, in auto-sensing mode. These interfaces support the half duplex mode and full duplex mode. The full duplex mode is most commonly used. Applications The 8FE1GE can be installed into the WSIC slots of the AR1200, AR2220, AR2240, and AR3260. On the AR1200, two SIC slots are combined into one WSIC slot. AR1200 V200R001C00 does not support the 8FE1GE. Panel and Interfaces Figure 5-8 shows the appearance of the 8FE1GE. Figure 5-8 Appearance of the 8FE1GE 1 2 Buttons and Indicators on the Panel Table 5-12 describes the buttons and indicators on the 8FE1GE panel. Table 5-12 Buttons and indicators on the 8FE1GE panel Number in Figure 5-8 Indicator Color Description STAT Green If the indicator blinks once 2s (0.5 Hz), the system is running properly. If the indicator blinks once 0.25s (4 Hz), the system is powering on or restarting. Issue 03 (2012-04-20) Red If the indicator is red, a fault that affects services occurs and cannot be rectified automatically. The fault needs to be rectified manually. Off If the indicator is off, the software is not running or is being reset. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 64 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Number in Figure 5-8 Indicator Color 2 and 3 FE/GE interface Green indicators: l The LINK indicator is in green. Yellow l The ACT indicator is in yellow. Description If the indicator is steady on, a link has been established. If the indicator is off, no link is established. If the indicator is blinking, data is being transmitted or received. If the indicator is off, no data is being transmitted or received. Interfaces Table 5-13 describes the types and functions of interfaces on the 8FE1GE. Table 5-13 Types and functions of interfaces on the 8FE1GE Letter in Figure 5-8 Name Quan tity Description Cable Type 10BASE-TX/ 100BASETX electrical interface The 8FE1GE provides eight FE electrical interfaces to transmit and receive FE services. 6.5 Network Cable 1000BASE-T electrical interface The 8FE1GE provides one GE electrical interface to transmit and receive GE services. Interface Attributes Table 5-14 Attributes of 10BASE-TX/100BASE-TX electrical interfaces Item Description Connector type RJ45 Interface attribute MDI/MDIX NOTE l The interfaces of most network cards are medium dependent interfaces (MDIs). l MDIX interfaces are usually used on hubs or LAN switches. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 65 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Item Description Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP Network layer protocol IP 5 Cards Table 5-15 Attributes of 1000BASE-T electrical interfaces Item Description Connector type RJ45 Interface attribute MDI/MDIX NOTE l The interfaces of most network cards are medium dependent interfaces (MDIs). l MDIX interfaces are usually used on hubs or LAN switches. Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP Network layer protocol IP Technical Specifications Table 5-16 describes the technical specifications of the 8FE1GE. Table 5-16 Technical specifications of the 8FE1GE Issue 03 (2012-04-20) Item Specification Dimensions (depth x width x height) 223.5 mm x 201 mm x 19.82 mm (8.8 in. x 7.92 in. x 0.78 in.) Maximum power consumption 12.036 W Weight 0.6 kg (1.33 lb) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 66 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards 5.4.2 24GE-24-Port 1000BASE-RJ45 L2/L3 Ethernet Interface Card The 24GE is the 24-port 1000M Ethernet electrical interface card (RJ45). It implements the 24channel Ethernet Layer 2 and Layer 3 switching functions. Functions and Applications Functions The 24GE provides 24 GE electrical interfaces to implement data access and line-speed switching. When category 5 twisted pairs (straight-through cables or crossover cables) are used, the maximum transmission distance is 100 meters. When category 5 twisted pairs (straight-through cables or crossover cables) are used, 1000 Mbit/s line-speed forwarding is supported between the 24 GE interfaces. These interfaces work in 10/100/1000 Mbit/s auto-sensing mode. These interfaces support the half duplex mode and full duplex mode. The full duplex mode is most commonly used. Applications The 24GE can be installed into the XSIC slot on the AR2220, AR2240 and AR3260. On the AR2220, two WSIC slots are combined into one XSIC slot. Panel and Interfaces Figure 5-9 shows the appearance of the 24GE. Figure 5-9 Appearance of the 24GE Buttons and Indicators on the Panel Table 5-17 describes the buttons and indicators on the 24GE panel. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 67 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Table 5-17 Buttons and indicators on the 24GE panel Number in Figure 5-9 Indicator Color Description STAT Green If the indicator blinks once 2s (0.5 Hz), the system is running properly. If the indicator blinks once 0.25s (4 Hz), the system is powering on or restarting. 2: indicators of interfaces in the second row LINK Red If the indicator is red, a fault that affects services occurs and cannot be rectified automatically. The fault needs to be rectified manually. Off If the indicator is off, the software is not running or is being reset. Green If the indicator is steady on, a link has been established. 3: indicators of interfaces in the first row If the indicator is blinking, data is being transmitted or received. If the indicator is off, the link is not connected. Interfaces Table 5-18 describes the types and functions of interfaces on the 24GE. Table 5-18 Types and functions of interfaces on the 24GE Letter in Figure 5-9 Name Qua ntity Description Cable Type 1000BASET electrical interface 24 The 24GE provides 24 GE electrical interfaces to transmit and receive GE services. 6.5 Network Cable Interface Attributes Table 5-19 Attributes of 1000BASE-T electrical interfaces Issue 03 (2012-04-20) Item Description Connector type RJ45 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 68 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Item Description Interface attribute MDI/MDIX 5 Cards NOTE l The interfaces of most network cards are medium dependent interfaces (MDIs). l MDIX interfaces are usually used on hubs or LAN switches. Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP Network layer protocol IP Technical Specifications Table 5-20 describes the technical specifications of the 24GE. Table 5-20 Technical specifications of the 24GE Item Specification Dimensions (depth x width x height) 223.50 mm x 201.00 mm x 40.14 mm (8.8 in. x 7.92 in. x 1.58 in.) Maximum power consumption 25 W Weight 0.85 kg (1.88 lb) 5.5 WAN Interface Card This section describes the types, functions, applications, appearance, interfaces, and technical specifications of the WAN interface card. 5.5.1 1GEC (1-Port-GE Combo WAN Interface Card) 1GEC is a 1-port 1000M Ethernet optical and electrical Combo interface card (RJ45, SFP). Only one of the optical interface and electrical interface can be used at a time. 1GEC stands for: 1: one interface GE: 1000M Ethernet C: Combo interface Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 69 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Functions and Applications Functions The 1GEC provides one GE optical and electrical Combo interface to implement data access and line-speed switching. The Combo interface sends, receives, and processes GE data traffic. The electrical interface works at 10/100/1000 Mbit/s in auto-sensing mode. The optical interface works at 100/1000 Mbit/s in auto-sensing mode. Applications The 1GEC is installed into the SIC slot of the AR1200, AR2220, AR2240 and AR3260. Panel and Interfaces Figure 5-10 shows the appearance of the 1GEC panel. Figure 5-10 Appearance of the 1GEC panel 34 Buttons and Indicators on the Panel Table 5-21 describes the buttons and indicators on the 1GEC panel. Table 5-21 Buttons and indicators on the 1GEC panel Number in Figure 5-10 Indicator Color Description STAT Green If the indicator blinks once 2s (0.5 Hz), the system is running properly. If the indicator blinks once 0.25s (4 Hz), the system is powering on or restarting. Red Issue 03 (2012-04-20) If the indicator is red, a fault that affects services occurs and cannot be rectified automatically. The fault needs to be rectified manually. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 70 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Number in Figure 5-10 2 and 3 4 and 5 Indicator 5 Cards Color Description Off If the indicator is off, the software is not running or is being reset. GE interface indicators: l The LINK indicator is in green. l The ACT indicator is in yellow. Green If the indicator is steady on, a link has been established. SFP interface indicators: l The LINK indicator is in green. l The ACT indicator is in yellow. Green If the indicator is off, no link is established. Yellow If the indicator is blinking, data is being transmitted or received. If the indicator is off, no data is being transmitted or received. If the indicator is steady on, a link has been established. If the indicator is off, no link is established. Yellow If the indicator is blinking, data is being transmitted or received. If the indicator is off, no data is being transmitted or received. Interfaces Table 5-22 describes the types and functions of interface on the 1GEC. Table 5-22 Types and functions of the interface on the 1GEC Issue 03 (2012-04-20) Lette r in Figur 5-10 Name Qu ant ity Description Cable Type 1000BA SE-T electrica interface The 1GEC provides one GE electrical interface to transmit and receive GE services. 6.5 Network Cable NOTE Only one of the optical interface and electrical interface can be used at a time. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 71 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Lette r in Figur 5-10 Name Qu ant ity Description Cable Type 1000BA SE-X optical interface The 1GEC provides one GE optical interface to transmit and receive GE services. 6.6 Optical Fiber Interface Attributes Table 5-23 Attributes of 1000BASE-T electrical interfaces Item Description Connector type RJ45 Interface attribute MDI/MDIX NOTE l The interfaces of most network cards are medium dependent interfaces (MDIs). l MDIX interfaces are usually used on hubs or LAN switches. Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP Network layer protocol IP Table 5-24 Attributes of the SFP optical module (100/1000 Mbit/s) supported by the GE optical interface Issue 03 (2012-04-20) Attri bute Description Tran smiss ion dista nce 500 m 10 km 10 km (singlemode bidirectional fiber) 40 km Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 40 km 80 km 100 km 72 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Attri bute Description Cent er wave lengt 850 nm Tran smitt ing powe -9.5 dBm to -2.5 dBm Rece iver sensi tivity 1310 nm 5 Cards Tx: 1310 nm Tx: 1490 nm 1310 nm 1550 nm 1550 nm 1550 nm Rx: 1490 nm Rx: 1310 nm -9.0 dBm to -3.0 dBm -9.0 dBm to -3.0 dBm -9.0 dBm to -3.0 dBm -5.0 dBm to 0 dBm -5.0 dBm to 0 dBm -2.0 dBm to 5.0 dBm 0 dBm to 5 dBm -17.0 dBm -20.0 dBm -19.5 dBm -19.5 dBm -23 dBm -22 dBm -23.0 dBm -30.0 dBm Over load optic al powe 0 dBm -3.0 dBm -3.0 dBm -3.0 dBm -3.0 dBm -3.0 dBm -3.0 dBm -9.0 dBm Extin ction ratio 9 dB 9 dB 6 dB 6 dB 9 dB 8.5 dB 9 dB 8 dB Fiber type Multimode Single-mode Technical Specifications Table 5-25 describes the technical specifications of the 1GEC. Table 5-25 Technical specifications of the 1GEC Issue 03 (2012-04-20) Item Specification Dimensions (depth x width x height) 223.5 mm x 100.1 mm x 19.82 mm (8.8 in. x 3.94 in. x 0.78 in.) Maximum power consumption 2.28 W Weight 0.25 kg (0.55 lb) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 73 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards 5.5.2 2FE-2-Port-FE WAN Interface Card The 2FE is the 2-port 100M Ethernet electrical interface card (RJ45). Functions and Applications Functions The 2FE provides two FE electrical interfaces to implement data access and line-speed switching. When category 5 twisted pairs (straight-through cables or crossover cables) are used, the maximum transmission distance is 100 meters. Two FE electrical interfaces can be bound to function as an upstream interface at the line rate of 200 Mbit/s. The two FE interfaces work in 10/100 Mbit/s auto-sensing mode. These interfaces support the half duplex mode and full duplex mode. The full duplex mode is most commonly used. Applications The 2FE can be installed into the SIC slot of the AR1200, AR2220, AR2240 and AR3260. Panel and Interfaces Figure 5-11 shows the appearance of the 2FE. Figure 5-11 Appearance of the 2FE 1 2 Buttons and Indicators on the Panel Table 5-26 describes the buttons and indicators on the 2FE panel. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 74 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Table 5-26 Buttons and indicators on the 2FE panel Number in Figure 5-11 Indicator Color Description STAT Green If the indicator blinks once 2s (0.5 Hz), the system is running properly. If the indicator blinks once 0.25s (4 Hz), the system is powering on or restarting. 2 and 3 FE interface indicators: l The LINK indicator is in green. l The ACT indicator is in yellow. Red If the indicator is red, a fault that affects services occurs and cannot be rectified automatically. The fault needs to be rectified manually. Off If the indicator is off, the software is not running or is being reset. Green If the indicator is steady on, a link has been established. If the indicator is off, no link is established. Yellow If the indicator is blinking, data is being transmitted or received. If the indicator is off, no data is being transmitted or received. Interfaces Table 5-27 describes the types and functions of interfaces on the 2FE. Table 5-27 Types and functions of interfaces on the 2FE Issue 03 (2012-04-20) Letter in Figure 5-11 Name Qua ntit Description Cable Type FE electrical interface The 2FE provides two FE electrical interfaces to transmit and receive FE services. 6.5 Network Cable Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 75 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Interface Attributes Table 5-28 Attributes of 10BASE-TX/100BASE-TX electrical interfaces Item Description Connector type RJ45 Interface attribute MDI/MDIX NOTE l The interfaces of most network cards are medium dependent interfaces (MDIs). l MDIX interfaces are usually used on hubs or LAN switches. Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP Network layer protocol IP Technical Specifications Table 5-29 describes the technical specifications of the 2FE. Table 5-29 Technical specifications of the 2FE Item Specification Dimensions (depth x width x height) 223.5 mm x 100.1 mm x 19.82 mm (8.8 in. x 3.94 in. x 0.78 in.) Maximum power consumption 3.01 W Weight 0.3 kg (0.66 lb) 5.5.3 1E1T1-M/2E1T1-M-1/2 Port-Channelized E1/T1/PRI/VE1 Multifunctional Interface Card The 1E1T1-M/2E1T1-M is the E1/T1/PRI/VE1 processing unit on the AR routers and provides one or two E1/T1/PRI/VE1 interfaces. Primary Rate Interface (PRI) indicates ISDN primary rate interfaces. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 76 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards NOTE l 1/2: indicates one or two interfaces. l E1: indicates E1 interfaces. l T1: indicates T1 interfaces. l M: indicates multiflex trunks. l VE1: indicates voice E1 interfaces. Table 5-30 lists the number of interfaces on the 1E1T1-M and 2E1T1-M. Table 5-30 Number of interfaces on the 1E1T1-M and 2E1T1-M Card Name Quantity of Interfaces 1E1T1-M 2E1T1-M 2E1T1-M cards have two types: SIC and WSIC. Table 5-31 lists the slots where the SIC card and WSIC card are installed. Table 5-31 Slots of 2E1T1-M SIC and WSIC cards Card Slot 2E1T1-M (SIC) SIC slot 2E1T1-M (WSIC) WSIC slot or XSIC slot NOTE In an XSIC slot, the WSIC card is installed in the lower part of the slot. The WSIC card uses the XSIC slot ID as its own slot ID. Functions and Applications Functions The 1E1T1-M/2E1T1-M provides the following functions: Sends, receives, and processes E1/T1 data traffic. Provides CE1/T1 access. Provides the ISDN PRI function. Applications 1E1T1-M/2E1T1-M(SIC) can be installed into the SIC slot of the AR1200, AR2220, AR2240 and AR3260. 2E1T1-M(WSIC) is installed in a WSIC or XSIC slot on the AR2220, AR2240 and AR3260. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 77 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Panel and Interfaces Figure 5-12 shows the appearance of the 1E1T1-M. Figure 5-12 Appearance of the 1E1T1-M Figure 5-13 shows the appearance of the 2E1T1-M (SIC). Figure 5-13 Appearance of the 2E1T1-M (SIC) Figure 5-14 shows the appearance of the 2E1T1-M (WSIC). Figure 5-14 Appearance of the 2E1T1-M (WSIC) Buttons and Indicators on the Panel Table 5-32 describes the buttons and indicators on the 1E1T1-M/2E1T1-M panel. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 78 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Table 5-32 Buttons and indicators on the 1E1T1-M/2E1T1-M panel Number in Figure 5-12, Figure 5-13, Figure 5-14 Indicator Color Description STAT Green If the indicator blinks once 2s (0.5 Hz), the system is running properly. If the indicator blinks once 0.25s (4 Hz), the system is powering on or restarting. LINK/ACT Red If the indicator is red, a fault that affects services occurs and cannot be rectified automatically. The fault needs to be rectified manually. Off If the indicator is off, the software is not running or is being reset. Green If the indicator is steady on, a link has been established. Yellow (The indicator is in green and blinks red.) If the indicator is in green and blinks red, data is being transmitted or received. Off If the indicator is off, there is no connection. Interfaces Table 5-33 describes the types and functions of interfaces on the 1E1T1-M/2E1T1-M. Table 5-33 Types and functions of interfaces on the 1E1T1-M/2E1T1-M Letter in Figure 5-12, Figure 5-13, Figure 5-14 Nam Quantity Description Cable Type DB9 1E1T1-M: 1 75-ohm or 120ohm E1 cable or 100-ohm T1 cable 6.7 E1/T1 Trunk Cables 2E1T1-M: 2 Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 79 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Interface Attributes Table 5-34 Attributes of channelized E1 interfaces Attribute Description Connector type DB9 Standards compliance G.703 or G.704 Transmission rate 2.048 Mbit/s Cable type E1 75-ohm unbalanced coaxial cable E1 120-ohm balanced twisted pair cable E1 trunk cable extension Working mode CE1, ISDN PRI, or VE1 Function Backup Terminal access ISDN PRI Table 5-35 Attributes of channelized T1 interfaces Attribute Description Connector type DB9 Standards compliance G.703 or G.704 Transmission rate 1.544 Mbit/s Cable type T1 100-ohm coaxial cable Working mode CT1, ISDN PRI, or VT1 Function Backup Terminal access ISDN PRI Technical Specifications Table 5-36 describes the technical specifications of the 1E1T1-M/2E1T1-M. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 80 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Table 5-36 Technical specifications of the 1E1T1-M/2E1T1-M Item Specification Dimensions (depth x width x height) 1E1T1-M/2E1T1-M (SIC): 223.5 mm x 100.1 mm x 19.82 mm (8.8 in. x 3.94 in. x 0.78 in.) Maximum power consumption 7W Weight 0.3 kg (0.66 lb) 2E1T1-M (WSIC): 223.5 mm x 201 mm x 19.82 mm (8.8 in. x 7.92 in. x 0.78 in.) 5.5.4 1E1T1-F/2E1T1-F (1/2-Port-Fractional Channelized E1/T1 WAN Interface Card) The 1E1T1-F/2E1T1-F is the E1/T1 processing unit on the AR routers and provides one or two E1/T1 interfaces. NOTE 1E1T1-F/2E1T1-F stands for: l 1/2: one or two interfaces l E1: E1 interface l T1: T1 interface l F: fractional E1 Table 5-37 lists the number of interfaces on the 1E1T1-F and 2E1T1-F. Table 5-37 Number of interfaces on the 1E1T1-F and 2E1T1-F Card Name Quantity of Interfaces 1E1T1-F 2E1T1-F Functions and Applications Functions The 1E1T1-F/2E1T1-F sends, receives, and processes E1/T1 data traffic. Table 5-38 describes the differences in functions provided by the 1E1T1-F/2E1T1-F and 1E1T1-M/2E1T1-M. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 81 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Table 5-38 Differences in functions provided by the 1E1T1-F/2E1T1-F and 1E1T1-M/2E1T1M Card Name Fractional E1 Mode Whether to Support the PRI Mode 1E1T1-F/2E1T1-F Timeslots of an E1/T1 interface can only be bundled into one channel at a rate of n x 64 kbit/s (n specifies the number of bundled timeslots and ranges from 1 to 31). No 1E1T1-M/2E1T1-M Timeslots of an E1/T1 interface can be bundled into multiple channels. Yes Applications The 1E1T1-F/2E1T1-F is installed into the SIC slot of the AR1200, AR2220, AR2240 and AR3260. Panel and Interfaces The 1E1T1-F and 1E1T1-M panels are identical except for having different silkscreens. Figure 5-12 shows the appearance of the 1E1T1-F panel. The 2E1T1-F and 2E1T1-M panels are identical except for having different silkscreens. Figure 5-13 shows the appearance of the 2E1T1-F panel. Buttons and Indicators on the Panel Table 5-32 describes the buttons and indicators on the 1E1T1-F/2E1T1-F panel. Interfaces Table 5-33 describes the types and functions of interfaces on the 1E1T1-F/2E1T1-F. Interface Attributes Table 5-39 Attributes of unchannelized E1 interfaces Issue 03 (2012-04-20) Attribute Description Connector type DB9 Standards compliance G.703 or G.704 Transmission rate 2.048 Mbit/s Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 82 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Attribute Description Cable type E1 75-ohm unbalanced coaxial cable 5 Cards E1 120-ohm balanced twisted pair cable E1 trunk cable extension Working mode Unchannelized E1 Function Backup Terminal access Table 5-40 Attributes of unchannelized T1 interfaces Attribute Description Connector type DB9 Standards compliance G.703 or G.704 Transmission rate 1.544 Mbit/s Cable type T1 100-ohm coaxial cable Working mode Unchannelized T1 Function Backup Terminal access Technical Specifications Table 5-41 describes the technical specifications of the 1E1T1-F/2E1T1-F. Table 5-41 Technical specifications of the 1E1T1-F/2E1T1-F Issue 03 (2012-04-20) Item Specification Dimensions (depth x width x height) 223.5 mm x 100.1 mm x 19.82 mm (8.8 in. x 3.94 in. x 0.78 in.) Maximum power consumption 7W Weight 0.3 kg (0.66 lb) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 83 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards 5.5.5 1SA/2SA-1/2-Port-Synchronous/Asynchronous WAN Interface Card The 1SA/2SA is the 1-port/2-port synchronous/asynchronous serial interface module on the AR routers. NOTE l 1/2: indicates one interface or two interfaces. l S: indicates synchronous serial interface. l A: indicates asynchronous serial interface. Table 5-42 lists the number of interfaces on the 1SA and 2SA. Table 5-42 Number of interfaces on the 1SA and 2SA Card Name Quantity of Interfaces 1SA 2SA Functions and Applications Functions The 1SA/2SA provides the following functions: A synchronous serial interface can function as a DCE or DTE. It supports multiple physical layer protocols, such as V.24, V.35, and X.21, but does not support X.21 DCE. The maximum rate of V.24 is 64 kbit/s and V.35 is 2.048 Mbit/s. An asynchronous serial interface supports the RS232 protocol and provides a maximum transmission rate of 115.2 kbit/s. The 1SA/2SA provides system management channels by using in-band GE channels and implements in-service upgrade by using system management channels. The system powers on or off the 1SA/2SA and monitors the current of the 1SA/2SA; the backplane provides 12 V voltage for the 1SA/2SA. The 1SA/2SA is hot swappable. Applications 1SA/2SA can be installed into the SIC slot of the AR1200, AR2220, AR2240 and AR3260. Panel and Interfaces Figure 5-15 shows the appearance of the 1SA. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 84 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Figure 5-15 Appearance of the 1SA 12 3 Figure 5-16 shows the appearance of the 2SA. Figure 5-16 Appearance of the 2SA 12 Buttons and Indicators on the Panel Table 5-43 describes the buttons and indicators on the 1SA/2SA panel. Table 5-43 Buttons and indicators on the 1SA/2SA panel Numbe r in Figure 5-15 and Figure 5-16 Indicator Color Description STAT Green If the indicator blinks once 2s (0.5 Hz), the system is running properly. If the indicator blinks once 0.25s (4 Hz), the system is powering on or restarting. Red Issue 03 (2012-04-20) If the indicator is red, a fault that affects services occurs and cannot be rectified automatically. The fault needs to be rectified manually. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 85 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Numbe r in Figure 5-15 and Figure 5-16 2 and 3 Indicator Synchronous/ Asynchronous serial interface indicators: l The LINK indicator is in green. l The ACT indicator is in yellow. 5 Cards Color Description Off If the indicator is off, the software is not running or is being reset. Green If the indicator is steady on, a link has been established. If the LINK indicator is off, the link is not connected. Yellow If the indicator is blinking, data is being transmitted or received. If the ACT indicator is off, no data is transmitted or received. Interfaces Table 5-44 describes the types and functions of interfaces on the 1SA/2SA. Table 5-44 Types and functions of interfaces on the 1SA/2SA Lett er in Figu re 5-15 and Figu re 5-16 Name Quantity Description Cable Type DB28 1SA: 1 The synchronous/ asynchronous serial interface cable is selected according to attributes of the connected line. 6.8 Synchronous/ Asynchronous Serial Interface Cables 2SA: 2 Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 86 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Interface Attributes Table 5-45 Attributes of synchronous/asynchronous serial interfaces Attribute Description Synchronous Serial Interface Connector type DB28 Standards compliance and working mode l V.24 DTE l V.35 DTE l V.24 DCE l V.35 DCE Asynchronous Serial Interface RS232 l X.21 DTE l RS449 DTE l RS449 DCE l RS530 DTE l RS530 DCE Minimum baud rate (bit/ s) 1200 1200 600 Maximum baud rate (bit/ s) 64 k 2.048 M 115.2 k Cable type l V.24 DTE cable l V.24 DCE cable l V.35 DTE cable l V.35 DCE cable l X.21 DTE cable l RS449 DTE cable l RS449 DCE cable l RS530 DTE cable l RS530 DCE cable Function DDN leased line l Modem dial-up l Backup Terminal access l Asynchronous leased line l Terminal access Technical Specifications Table 5-46 describes the technical specifications of the 1SA/2SA. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 87 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Table 5-46 Technical specifications of the 1SA/2SA Item Specification Dimensions (Depth x Width x Height) 223.5 mm x 100.1 mm x 19.82 mm (8.8 in. x 3.94 in. x 0.78 in.) Maximum power consumption l 1SA: 10 W Weight 0.3 kg (0.66 lb) l 2SA: 11.7 W 5.5.6 8AS (8-Port-Asynchronous WAN Interface Card) The 8AS is an 8-port asynchronous serial interface module on the AR routers. NOTE 8AS stands for: l 8: eight interfaces l AS: asynchronous serial interface Functions and Applications Functions The 8AS sends, receives, and processes asynchronous data traffic. Supports a maximum of 115.2 kbit/s transmission rate for each asynchronous serial interface. Supports terminal access and asynchronous leased lines. Functions as a dialup access server for small and medium-sized ISPs when asynchronous serial interfaces are used for dialup. Applications The 8AS is installed into the WSIC slot of the AR1200, AR2220, AR2240 and AR3260. On the AR1200, a WSIC slot consists of two SIC slots. Panel and Interfaces Figure 5-17 shows the appearance of the 8AS panel. Figure 5-17 Appearance of the 8AS panel Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 88 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Buttons and Indicators on the Panel Table 5-47 describes the buttons and indicators on the 8AS panel. Table 5-47 Buttons and indicators on the 8AS panel Number in Figure 5-17 Indicator Color Description STAT Green If the indicator blinks once 2s (0.5 Hz), the system is running properly. If the indicator blinks once 0.25s (4 Hz), the system is powering on or restarting. LINK (interface status indicator) Red If the indicator is red, a fault that affects services occurs and cannot be rectified automatically. The fault needs to be rectified manually. Off If the indicator is off, the software is not running or is being reset. Green If the indicator is steady on, a link has been established. If the indicator is off, no link is established. Interfaces Table 5-48 describes the types and functions of interfaces on the 8AS. Table 5-48 Types and functions of interfaces on the 8AS Issue 03 (2012-04-20) Letter in Figure 5-17 Name Quant ity Description Cable Type RJ45 Interfaces on the 8AS send, receive, and process asynchronous data traffic using customized RJ45 cables. 6.12 8AS Cable Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 89 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Interface Attributes Table 5-49 Attributes of asynchronous serial interfaces Attribute Description Connector type RJ45 Standards compliance and working mode RS232 Minimum baud rate (bit/s) 300 Maximum baud rate (bit/s) 115.2 k Cable type Customized RJ45 cable Function l Modem dial-up l Backup l Asynchronous leased line l Terminal access Technical Specifications Table 5-50 describes the technical specifications of the 8AS. Table 5-50 Technical specifications of the 8AS Item Specification Dimensions (depth x width x height) 223.5 mm x 201 mm x 19.82 mm (8.8 in. x 7.92 in. x 0.78 in.) Maximum power consumption 8.9 W Weight 0.6 kg (1.32 lb) 5.5.7 1BST (1-Port-ISDN S/T WAN Interface Card) The 1BST is the ISDN module on the AR routers and provides one ISDN S/T interface, which transmits data services. The 1BST transmits, receives, and processes 1-channel ISDN BRI S/T data flow. Functions and Applications Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 90 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Functions The 1BST provides one ISDN S/T interface for data access. The 1BST consists of the following modules: CPU control module: manages the system and loads programs. CPLD logic module: provides the working clock and reset signals for the chip, controls the service port status, and monitors the board clock. ISDN chip module: provides S/T interface access, supports TE mode, and provides parallel interfaces and serial interfaces. Power supply module: conducts power from backplane to card. Clock module: provides the working clock for the CPU and working modules. Applications The 1BST is installed into the SIC slot of the AR1200, AR2220, AR2240 and AR3260. Panel and Interfaces Figure 5-18 shows the appearance of the 1BST panel. Figure 5-18 Appearance of the 1BST panel 1 2 Buttons and Indicators on the Panel Table 5-51 describes the buttons and indicators on the 1BST panel. Table 5-51 Buttons and indicators on the 1BST panel Number in Figure 5-18 Indicator Color Description STAT Green If the indicator blinks once 2s (0.5 Hz), the system is running properly. If the indicator blinks once 0.25s (4 Hz), the system is powering on or restarting. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 91 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Number in Figure 5-18 Indicator 5 Cards Color Description Red If the indicator is red, a fault that affects services occurs and cannot be rectified automatically. The fault needs to be rectified manually. Off If the indicator is off, the software is not running or is being reset. ACT (interface status indicator) Green If the indicator is steady on, the ISDN channel is activated. B1/B2 Green If the indicator is off, the ISDN channel is deactivated. If the indicator is blinking, the B1/ B2 channel of the ISDN channel is being occupied. If the indicator is off, the B1/B2 channel of the ISDN channel is idle. Interfaces Table 5-52 describes the types and functions of interfaces on the 1BST. Table 5-52 Types and functions of interfaces on the 1BST Letter in Figure 5-18 Name Quantity Description Cable Type RJ45 ISDN S/T interfaces are provided. 6.10 ISDN-ST Cables Interface Attributes Table 5-53 ISDN S/T interface attributes Issue 03 (2012-04-20) Item Description Connector RJ45 Standards compliance ITU-T I.430, Q.921, Q.931 Rate 192 kbit/s Bandwidth 0 to 100 MHz Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 92 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Item Description Cable l TE: standard ISDN S/T interface cables (straightthrough cables) l NT: ISDN S/T interface crossover cables Technical Specifications Table 5-54 describes the technical specifications of the 1BST. Table 5-54 Technical specifications of the 1BST Item Specification Dimensions (depth x width x height) 223.5 mm x 100.1 mm x 19.82 mm (8.8 in. x 3.94 in. x 0.78 in.) Maximum power consumption 12 W Weight 0.3 kg (0.66 lb) 5.5.8 1CPOS-155M (1-Port Channelized POS Interface Card) 1CPOS-155M provides an STM-1/OC3 optical interface to implement 63-channel E1 or 84channel T1 transmission in compliance with SDH/SONET. NOTE 1CPOS-155M stands for: l 1: one interface l C: channelized l POS: Packet Over SDH/SONET l 155M: a rate of 155.52 Mbit/s Functions and Applications Functions 1CPOS-155M has the following functions: Supports clear channel (unframed) E1, non-channelized (framed) E1, and channelized CE1. Supports non-channelized (framed) T1 and channelized CT1. Supports the link layer protocols such as HDLC and PPP and a maximum of 1024 HDLC channels. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 93 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Supports four SFP optical module types: short-distance multi-mode (1310 nm), middistance single-mode (1310 nm), long-distance single-mode (1310 nm), and ultra-longdistance single-mode (1550 nm). Automatically starts and loads configurations after being powered on, provides the system management function using a GE inband channel, and uses the UART serial interface as the escape channel for subcard. Uses the 12 V power provided by the backplane, be powered on and off by the main control board, and monitors voltage and current. Be hot swappable. Applications 1CPOS-155M can be installed in a SIC slot of AR2220, AR2240 and AR3260. Panel and Interfaces Figure 5-19 shows the appearance of the 1CPOS-155M. Figure 5-19 Appearance of the 1CPOS-155M Buttons and Indicators on the Panel Table 5-55 describes the buttons and indicators on the 1CPOS-155M panel. Table 5-55 Buttons and indicators on the 1CPOS-155M panel Number in Figure 5-19 Indicator Color Description STAT Green If the indicator blinks once 2s (0.5 Hz), the system is running properly. If the indicator blinks once 0.25s (4 Hz), the system is powering on or restarting. Red Issue 03 (2012-04-20) If the indicator is red, a fault that affects services occurs and cannot be rectified automatically. The fault needs to be rectified manually. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 94 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Number in Figure 5-19 Indicator LINK 5 Cards Color Description Off If the indicator is off, the software is not running or is being reset. Green If the indicator is steady on, a link has been established. If the indicator is off, no link is established. ACT Yellow If the indicator is blinking, data is being transmitted or received. If the indicator is off, no data is being transmitted or received. Interfaces Table 5-56 describes the types and functions of interfaces on the 1CPOS-155M. Table 5-56 Types and functions of interfaces on the 1CPOS-155M Letter in Figure 5-19 Name Quantit Description Cable Type SFP optical interface The 1CPOS-155M provides one SFP optical interface to transmit and receive SDH/ SONET frames. 6.6 Optical Fiber Interface Attributes Table 5-57 CPOS interface attributes Issue 03 (2012-04-20) Attribute Description Connector type LC/PC Optical interface attribute Depending on the SFP optical module Standards compliance STM-1 Frame format SDH/SONET Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 95 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Attribute Description Network layer protocol IP 5 Cards Table 5-58 Attributes of the SFP optical module supported by the CPOS interface Attribute Description Transmissio n distance 2 km 15 km 40 km 80 km Center wavelength 1310 nm 1310 nm 1310 nm 1550 nm Transmittin g power -19.0 dBm to -14.0 dBm -15.0 dBm to 8.0 dBm -15.0 dBm to 8.0 dBm -3.0 dBm to 0 dBm Receiver sensitivity -28.0 dBm -23.0 dBm -23.0 dBm -32.98 dBm Overload optical power -14.0 dBm -10.17 dBm -8.0 dBm -8.0 dBm Extinction ratio >10.0 dB 58.86 dB 14.08 dB 43.09 dB Fiber type Multimode Single-mode Technical Specifications Table 5-59 describes the technical specifications of the 1CPOS-155M. Table 5-59 Technical specifications of the 1CPOS-155M Item Specification Dimensions (depth x width x height) 223.5 mm x 100.1 mm x 19.82 mm (8.8 in. x 3.94 in. x 0.78 in.) Maximum power consumption 12 W Weight 0.3 kg (0.66 lb) 5.5.9 3G-HSPA+7 (3G WAN Interface Card) A 3G-HSPA+7 interface card provides two 3G antenna interfaces and one mini USB interface. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 96 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Functions and Applications Functions The 3G-HSPA+7 interface card provides WAN access through WCDMA. Applications The 3G-HSPA+7 interface card can be installed in the SIC slot on the AR1200, AR2220, AR2240, and AR3260 chassis. Panel and Interfaces Figure 5-20 shows the appearance of the 3G-HSPA+7 interface card. Figure 5-20 3G-HSPA+7 panel Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 97 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Buttons and Indicators on the Panel Table 5-60 describes the buttons and indicators on the 3G-HSPA+7 panel. Table 5-60 Buttons and indicators on the 3G-HSPA+7 panel Number in Figure 5-20 Indicator Color Description STAT Green If the indicator is steady on, the router has been powered on, but the system software is not running. If the indicator blinks once every 2s (0.5 Hz), the system is running properly. If the indicator blinks once every 0.25s (4 Hz), the system is loading software after power-on or is restarting. 3G Red If the indicator is steady on, a fault that affects services has occurred and cannot be rectified automatically. The fault needs to be rectified manually. Orange If the indicator is off, the software is not running or is being reset. Green If the indicator is steady on, the 3G signal strength is high. If the indicator blinks once every 2s (0.5 Hz), the 3G signals strength is low. If the indicator blinks once every 0.25s (4 Hz), the 3G signals strength is medium. 2G Green If the indicator is steady on, the 2G signal strength is high. If the indicator blinks once every 2s (0.5 Hz), the 2G signals strength is low. If the indicator blinks once every 0.25s (4 Hz), the 2G signals strength is medium. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 98 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Number in Figure 5-20 Indicator Color Description WWAN Green If the indicator is steady on, the 3G/2G connection is being established or is active. If the indicator is blinking, data is being transmitted or received over the 3G/2G connection. If the indicator is off, the 3G/2G connection has not been established or is inactive. Interfaces Table 5-61 describes the types and functions of interfaces on the 3G-HSPA+7 interface card. Table 5-61 Types and functions of interfaces on the 3G-HSPA+7 interface card Lette r in Figu re 5-20 Name Qu ant ity Description Cable Type Antenna interface The 3G-HSPA+7 interface card provides two 3G interfaces to transmit and receive 3G service data. One interface is the primary interface, and the other is the secondary interface. 3G antenna Mini USB interface The mini USB interface is used to commission the 3G module. Mini USB cable Interface Attributes Table 5-62 3G interface attributes Item Description Connector SMA RF: connects to an antenna to provide wireless access. mini USB: connects to a USB flash drive with third-party wireless network test software, for example, Qualcomm CAIT. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 99 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Item Description Standards compliance and frequency bands supported GSM/GPRS/EDGE: 850/900/1800/1900 (MHz) Rate GSM CS: 5 Cards HSPA+/HSUPA/HSDPA/WCDMA: 2100/1900/900/850 (MHz) l Upstream (Tx): 9.6kbit/s l Downstream (Rx): 9.6kbit/s GPRS/EDGE: Multi-slot Class 12, Class B WCDMA CS: l Upstream (Tx): 64 kbit/s l Downstream (Rx): 64 kbit/s WCDMA PS: l Upstream (Tx): 384 kbit/s l Downstream (Rx): 384 kbit/s HSPA: l Upstream (Tx): 5.76 Mbit/s l Downstream (Rx): 14.4 Mbit/s HSPA+: l Upstream (Tx): 5.76 Mbit/s l Downstream (Rx): 21 Mbit/s Network protocol WCDMA/HSPA/GPRS/EDGE Installing a 3G SIM Card For details on how to installing a 3G SIM card on the 3G-HSPA+7 interface card, see the AR1200&2200&3200 Quick Installation Guide. Technical Specifications Table 5-63 describes the technical specifications of the 3G-HSPA+7 interface card. Table 5-63 Technical specifications of the 3G-HSPA+7 Issue 03 (2012-04-20) Parameter Description Dimensions (W x D x H) 100.1 mm x 223.5 mm x 19.82 mm Maximum power consumption 7W Weight 0.2 kg Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 100 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards 5.5.10 4GEW-T (4-Port-GE Electrical WAN Interface Card) The 4GEW-T interface card provides four GE electrical interfaces. 4GEW-T stands for: 4: four interfaces GE: 1000M Ethernet W: WAN T: electrical interface Functions and Applications Functions The 4GEW-T interface card provides four GE electrical interfaces to implement data access and line-speed switching. The 4GEW-T interface card sends, receives, and processes GE data traffic. The four GE electrical interfaces work in 10/100/1000 Mbit/s auto-negotiation mode. Applications The 4GEW-T interface card can be installed in the WSIC slot on the AR1200, AR2220, AR2240, and AR3260 chassis. Panel and Interfaces Figure 5-21 shows the appearance of the 4GEW-T interface card. Figure 5-21 4GEW-T panel Buttons and Indicators on the Panel Table 5-64 describes the buttons and indicators on the 4GEW-T panel. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 101 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Table 5-64 Buttons and indicators on the 4GEW-T panel Number in Figure 5-21 Indicator Color Description STAT Green If the indicator is steady on, the router has been powered on, but the system software is not running. If the indicator blinks once every 2s (0.5 Hz), the system is running properly. If the indicator blinks once every 0.25s (4 Hz), the system is loading software after power-on or is restarting. 2 and 3 GE interface indicators: l The LINK indicator is in green. l The ACT indicator is in yellow. Red If the indicator is steady on, a fault that affects services has occurred and cannot be rectified automatically. The fault needs to be rectified manually. Off If the indicator is off, the software is not running or is being reset. Green If the indicator is steady on, a link has been established. If the indicator is off, no link is established. Yellow If the indicator is blinking, the interface is transmitting or receiving data. If the indicator is off, no data is being transmitted or received. Interfaces Table 5-65 describes the types and functions of interfaces on the 4GEW-T interface card. Table 5-65 Types and functions of interfaces on the 4GEW-T interface card Issue 03 (2012-04-20) Lette r in Figur 5-21 Name Qu ant ity Description Cable Type 1000BA SE-T electrica interface The 4GEW-T interface card provides four 1000M electrical interfaces to transmit and receive GE data traffic. 6.5 Network Cable Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 102 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Interface Attributes Table 5-66 Attributes of 1000BASE-T electrical interfaces Item Description Connector type RJ45 Interface attribute MDI/MDIX NOTE l The interfaces of most network cards are medium dependent interfaces (MDIs). l MDIX interfaces are usually used on hubs or LAN switches. Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP Network layer protocol IP Technical Specifications Table 5-67 describes the technical specifications of the 4GEW-T interface card. Table 5-67 Technical specifications of the 4GEW-T Parameter Description Dimensions (W x D x H) 201 mm x 223.5 mm x 19.82 mm Maximum power consumption 11 W Weight 0.3 kg 5.5.11 4GEW-S (4-Port-GE Optical WAN Interface Card The 4GEW-S interface card provides four GE optical interfaces. 4GEW-S stands for: 4: four interfaces GE: 1000M Ethernet W: WAN S: optical interface Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 103 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Functions and Applications Functions The 4GEW-S interface card provides four GE optical interfaces to implement data access and line-speed switching. The 4GEW-S interface card sends, receives, and processes GE data traffic. The four GE optical interfaces work in 100/1000 Mbit/s auto-sensing mode. Applications The 4GEW-S interface card can be installed in the WSIC slot on the AR1200, AR2220, AR2240, and AR3260 chassis. Panel and Interfaces Figure 5-22 shows the appearance of the 4GEW-S interface card. Figure 5-22 4GEW-S panel 12 3 2 3 23 23 Buttons and Indicators on the Panel Table 5-68 describes the buttons and indicators on the 4GEW-S panel. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 104 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Table 5-68 Buttons and indicators on the 4GEW-S panel Number in Figure 5-22 Indicator Color Description STAT Green If the indicator is steady on, the router has been powered on, but the system software is not running. If the indicator blinks once every 2s (0.5 Hz), the system is running properly. If the indicator blinks once every 0.25s (4 Hz), the system is loading software after power-on or is restarting. 2 and 3 GE interface indicators: l The LINK indicator is in green. l The ACT indicator is in yellow. Red If the indicator is steady on, a fault that affects services has occurred and cannot be rectified automatically. The fault needs to be rectified manually. Off If the indicator is off, the software is not running or is being reset. Green If the indicator is steady on, a link has been established. If the indicator is off, no link is established. Yellow If the indicator is blinking, the interface is transmitting or receiving data. If the indicator is off, no data is being transmitted or received. Interfaces Table 5-69 describes the types and functions of interfaces on the 4GEW-S interface card. Table 5-69 Types and functions of interfaces on the 4GEW-S interface card Issue 03 (2012-04-20) Lette r in Figur 5-22 Name Qu ant ity Description 1000BA SE-X optical interface The 4GEW-S interface card provides four GE 6.6 Optical optical interfaces to transmit and receive GE Fiber service traffic. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. Cable Type 105 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Interface Attributes Table 5-70 Attributes of the 100/1000BASE-X GE optical interface Attribute Description Connector type LC/PC Optical interface attribute Depending on the SFP optical module. Standards compliance IEEE 802.3ab Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP Network layer protocol IP Table 5-71 Attributes of the SFP optical module (100/1000 Mbit/s) supported by the GE optical interface Issue 03 (2012-04-20) Attri bute Description Tran smiss ion dista nce 500 m 10 km 10 km (singlemode bidirectional fiber) 40 km 40 km 80 km 100 km Cent er wave lengt 850 nm 1310 nm Tx: 1310 nm Tx: 1490 nm 1310 nm 1550 nm 1550 nm 1550 nm Rx: 1490 nm Rx: 1310 nm Tran smitt ing powe -9.5 dBm to -2.5 dBm -9.0 dBm to -3.0 dBm -9.0 dBm to -3.0 dBm -9.0 dBm to -3.0 dBm -5.0 dBm to 0 dBm -5.0 dBm to 0 dBm -2.0 dBm to 5.0 dBm 0 dBm to 5 dBm Rece iver sensi tivity -17.0 dBm -20.0 dBm -19.5 dBm -19.5 dBm -23 dBm -22 dBm -23.0 dBm -30.0 dBm Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 106 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Attri bute Description Over load optic al powe 0 dBm -3.0 dBm -3.0 dBm -3.0 dBm -3.0 dBm -3.0 dBm -3.0 dBm -9.0 dBm Extin ction ratio 9 dB 9 dB 6 dB 6 dB 9 dB 8.5 dB 9 dB 8 dB Fiber type Multimode Single-mode Technical Specifications Table 5-72 describes the technical specifications of the 4GEW-S interface card. Table 5-72 Technical specifications of the 4GEW-S Parameter Description Dimensions (W x D x H) 201 mm x 223.5 mm x 19.82 mm Maximum power consumption 8W Weight 0.3 kg 5.6 Voice Interface Card This section describes the types, functions, applications, appearance, interfaces, and technical specifications of the voice interface card. 5.6.1 2BST (2-Port-ISDN S/T Voice Interface Card) The 2BST is the ISDN module on the AR routers and provides two ISDN S/T interfaces, which transmit voice service. The 2BST implements the ISDN BRI function and provides the bandwidth of two B channels and one D channel: B channel: provides 64 kbit/s bandwidth and transmits voice service. D channel: is a signaling channel and provides 16 kbit/s bandwidth. The total bandwidth of two B channels and one D channel is 144 kbit/s. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 107 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards The S/T interface on the 2BST provides a rate of 192 kbit/s, including 144 kbit/s for data transmission and 48 kbit/s for maintenance information transmission. Table 5-73 lists the number of interfaces on the 1BST and 2BST. Table 5-73 Number of interfaces on the 1BST and 2BST Card Name User Interface Usage Scenario Mode Feed Supported 1BST One S/T interface Data services TE No 2BST Two S/T interfaces Voice services NT -40 V feed NOTE l TE: terminal equipment l NT: network termination 2BST cards have two types: SIC and WSIC. Table 5-74 lists the slots where the SIC card and WSIC card are installed. Table 5-74 Slots of 2BST SIC and WSIC cards Card Slot 2BST (SIC) SIC slot 2BST (WSIC) WSIC slot or XSIC slot NOTE In an XSIC slot, the WSIC card is installed in the lower part of the slot. The WSIC card uses the XSIC slot ID as its own slot ID. Functions and Applications Functions The 2BST has the following functions: Provides two ISDN S/T interfaces for voice access. Implements NT mode. The 2BST consists of the following modules: CPU control module: manages the system and loads programs. CPLD logic module: provides the working clock and reset signals for the chip, controls the line -40 V feed, controls the service port status, and monitors the board clock. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 108 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards ISDN chip module: provides S/T interface access, supports NT mode, and provides parallel interfaces and serial interfaces. Power supply module: conducts power from backplane to card. Clock module: provides the working clock for the CPU and working modules. Applications 2BST (SIC) is installed into the SIC slot of the AR1200, AR2220, AR2240 and AR3260. The 2BST (WSIC) is installed in a WSIC or XSIC slot on the AR2220, AR2240 and AR3260. Panel and Interfaces Figure 5-23 shows the appearance of the 2BST (SIC) panel. Figure 5-23 Appearance of the 2BST (SIC) panel 1 2 Figure 5-24 shows the appearance of the 2BST (WSIC). Figure 5-24 Appearance of the 2BST (WSIC) panel 1 2 Buttons and Indicators on the Panel Table 5-75 describes the buttons and indicators on the 2BST panel. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 109 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Table 5-75 Buttons and indicators on the 2BST panel Number in Figure 5-23, Figure 5-24 Indicator Color Description STAT Green If the indicator blinks once 2s (0.5 Hz), the system is running properly. If the indicator blinks once 0.25s (4 Hz), the system is powering on or restarting. Red If the indicator is red, a fault that affects services occurs and cannot be rectified automatically. The fault needs to be rectified manually. Off If the indicator is off, the software is not running or is being reset. ACT (interface status indicator) Green If the indicator is steady on, the ISDN channel is activated. B1/B2 Green If the indicator is off, the ISDN channel is deactivated. If the indicator is blinking, the B1/ B2 channel of the ISDN channel is being occupied. If the indicator is off, the B1/B2 channel of the ISDN channel is idle. Interfaces Table 5-76 describes the types and functions of interfaces on the 2BST. Table 5-76 Types and functions of interfaces on the 2BST Issue 03 (2012-04-20) Letter in Figure 5-23, Figure 5-24 Name Quantity Description Cable Type RJ45 ISDN S/T interfaces are provided. 6.10 ISDN-ST Cables Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 110 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Interface Attributes Table 5-77 ISDN S/T interface attributes Item Description Connector RJ45 Standards compliance ITU-T I.430, Q.921, Q.931 Rate 192 kbit/s Bandwidth 0 to 100 MHz Cable l TE: standard ISDN S/T interface cables (straightthrough cables) l NT: ISDN S/T interface crossover cables Technical Specifications Table 5-78 describes the technical specifications of the 2BST. Table 5-78 Technical specifications of the 2BST Item Specification Dimensions (depth x width x height) 2BST (SIC): 223.5 mm x 100.1 mm x 19.82 mm (8.8 in. x 3.94 in. x 0.78 in.) Maximum power consumption 16.8 W Weight 0.3 kg (0.66 lb) 2BST (WSIC): 223.5 mm x 201 mm x 19.82 mm (8.8 in. x 7.92 in. x 0.78 in.) 5.6.2 4FXS1FXO-4-Port FXS and 1-Port FXO Voice Interface Card The 4FXS1FXO is the voice module on the AR routers. It provides five RJ11 interfaces, including four POTS FXS interfaces and one POTS FXO interface. NOTE l An FXS interface is a simulated subscriber line interface and provides access to AT0 loop trunk of the analog phone, fax, and telephone exchange. l An FXO interface is a loop trunk interface and provides access to the telephone exchange by using regular subscriber lines. Functions and Applications Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 111 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Functions The 4FXS1FXO works with the SRU to implement the voice call function. The first FXS interface works with an FXO interface to implement the power failure survival function. Applications The 4FXS1FXO can be installed into the SIC slot of the AR1200, AR2220, AR2240 and AR3260. Panel and Interfaces Figure 5-25 shows the appearance of the 4FXS1FXO. Figure 5-25 Appearance of the 4FXS1FXO Buttons and Indicators on the Panel Table 5-79 describes the buttons and indicators on the 4FXS1FXO panel. Table 5-79 Buttons and indicators on the 4FXS1FXO panel Number in Figure 5-25 Indicator Color Description STAT Green If the indicator blinks once 2s (0.5 Hz), the system is running properly. If the indicator blinks once 0.25s (4 Hz), the system is powering on or restarting. Issue 03 (2012-04-20) ACT (interface status indicator) Red If the indicator is red, a fault that affects services occurs and cannot be rectified automatically. The fault needs to be rectified manually. Off If the indicator is off, the software is not running or is being reset. Green If the indicator is steady on, the FXO channel is being occupied by a call. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 112 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Number in Figure 5-25 Indicator 5 Cards Color Description If the indicator is off, the FXO channel is idle. ACT (interface status indicator) Green If the indicator is steady on, the FXS channel is being occupied by a call. If the indicator is off, the FXS channel is idle. Interfaces Table 5-80 describes the types and functions of interfaces on the 4FXS1FXO. Table 5-80 Types and functions of interfaces on the 4FXS1FXO Letter in Figure 5-25 Name Qua ntity Description Cable Type FXS (RJ11) The POTS voice FXS interface uses regular telephone lines. 6.11 Regular Telephone Lines FXO (RJ11) The POTS voice FXO interface uses regular telephone lines. Interface Attributes Table 5-81 Attributes of FXS/FXO (RJ11) interfaces Attribute Description Connector type RJ11 Standards compliance ITU Q.512 for FXS interfaces ITU Q.552 for FXO interfaces ITU K.20 for protection against overcurrent and overvoltage Cable type Regular telephone line Dialing mode DTMF in accordance with GB3378 Pulse dialing Bandwidth Issue 03 (2012-04-20) 300 Hz to 3400 Hz Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 113 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Technical Specifications Table 5-82 describes the technical specifications of the 4FXS1FXO. Table 5-82 Technical specifications of the 4FXS1FXO Item Specification Dimensions (Depth x Width x Height) 223.5 mm x 100.1 mm x 19.82 mm (8.8 in. x 3.94 in. x 0.78 in.) Maximum power consumption 12.78 W Weight 0.3 kg (0.66 lb) 5.6.3 16/32/64/128-Channel DSP Module The 16/32/64/128-channel DSP module is a VoIP voice processing DIMM. Functions and Applications Functions The 16/32/64/128-channel DSP module provides the voice over IP (VoIP) functions, including: Processes the dial tone. Parses telephone numbers. Generates interactive voice response (IVR) and voice signal. Encodes, decodes, and converts voice. Implements voice conferences and echo canceler (EC). Processes IP packets. Applications The 16/32/64/128-channel DSP module is installed into the DSP DIMM of the main control board on the AR2220, AR2240 and AR3260. CAUTION Only the DSP module supported by the product can be inserted into the DSP DIMM slot. The DDR3 memory board or unsupported DIMMs cannot be inserted; otherwise, the device may be damaged or does not function properly. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 114 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Technical Specifications Table 5-83 shows the technical specifications of the 16/32/64/128-channel DSP module. Table 5-83 Technical specifications of the 16/32/64/128-channel DSP module Item Specification Maximum power consumption 2.89 W Weight 0.05 kg (0.11 lb) 5.7 xDSL/xPON Interface Card This section describes the types, functions, applications, appearance, interfaces, and technical specifications of the xDSL/xPON interface card. 5.7.1 ADSL-A/M and ADSL-B-1-Port-ADSL2+ ANNEX A/M and B WAN Interface Card The ADSL-A/M and ADSL-B are the ADSL2/ADSL2+ service access modules on the AR routers and support ADSL2+ Annex A, Annex B, and Annex M specifications. NOTE l The ADSL-A/M supports both Annex A and Annex M. l The ADSL-B supports Annex B. Table 5-84 describes the comparison between Annex A, Annex B, and Annex M. Table 5-84 Comparison between Annex A, Annex B, and Annex M Issue 03 (2012-04-20) Card Name Usage Scenario Annex A Annex A is applied to ADSL over POTS and compatible with POTS services. Annex B Annex B is applied to ADSL over ISDN and compatible with ISDN services. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 115 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Card Name Usage Scenario Annex M Annex M expands the upstream frequency band of ADSL and provides a higher upstream transmission rate. G.992.3 and G.992.5 each define Annex M: l Annex M defined in G.992.3 and Annex M defined in G.992.5 have the same upstream frequency band. l They have different downstream frequency bands: – The maximum downstream frequency band of Annex M defined in G.992.3 is 1104 kHz. – The maximum downstream frequency band of Annex M defined in G.992.5 is 2208 kHz. Functions and Applications Functions The ADSL-A/M and ADSL-B each provide 1-channel ADSL/ADSL2+ access, provide independent CPU and management interfaces, and support ADSL2+ Annex A, Annex B, and Annex M specifications. The ADSL-A/M or ADSL-B consists of the following modules: CPU control module: manages the system and loads programs. ADSL2+ module: implements ADSL2+ modulation and demodulation on CPEs. SGMII upstream module: provides one SGMII upstream interface to communicate with the active and standby SRUs. Power supply module: conducts power from backplane to card. Clock module: provides two types of working clocks for cards. Applications The ADSL-A/M and ADSL-B can be installed into the SIC slot of the AR1200, AR2220, AR2240 and AR3260. Panel and Interfaces NOTE The ADSL-A/M and ADSL-B panels are identical except for having different silkscreens. The following describes the panel and Interfaces of the ADSL-A/M. Figure 5-26 shows the appearance of the ADSL-A/M. Figure 5-26 Appearance of the ADSL-A/M Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 116 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Buttons and Indicators on the Panel Table 5-85 describes the buttons and indicators on the ADSL-A/M panel. Table 5-85 Buttons and indicators on the ADSL-A/M panel Number in Figure 5-26 Indicator Color Description STAT Green If the indicator blinks once 2s (0.5 Hz), the system is running properly. If the indicator blinks once 0.25s (4 Hz), the system is powering on or restarting. LINK Red If the indicator is red, a fault that affects services occurs and cannot be rectified automatically. The fault needs to be rectified manually. Off If the indicator is off, the software is not running or is being reset. Green If the indicator is steady on, the DSL channel has been activated. If the indicator is off, the DSL channel is not activated. If the indicator blinks once 0.25s (4 Hz), the DSL channel is being activated. Interfaces Table 5-86 describes the types and functions of interfaces on the ADSL-A/M. Table 5-86 Types and functions of interfaces on the ADSL-A/M Issue 03 (2012-04-20) Letter in Figure 5-26 Name Quanti ty Description Cable Type ADSL2+ (RJ11) The ADSL-A/M provides one RJ11 interface, which supports regular telephone lines. 6.11 Regular Telephone Lines Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 117 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Interface Attributes Table 5-87 Attributes of ADSL2/ADSL2+ interfaces Attribute Description Connector type RJ11 Standards compliance ADSL-A/M: ITU-T 992.1 G.DMT ITU-T 992.3 ITU-T 992.5 ADSL-B: ITU-T 992.1 G.DMT ANSI T1.413 Issue 2 ITU-T 992.3 ITU-T 992.5 Transmission rate ADSL-A/M: l ADSL full rate mode (ITU-T 992.1 G.DMT): a downstream transmission rate of 8 Mbit/s and an upstream transmission rate of 1024 kbit/s l ADSL2 full rate mode (ITU-T 992.3): a downstream transmission rate of 12 Mbit/s and an upstream transmission rate of 1024 kbit/s l ADSL2+ full rate mode (ITU-T 992.5): a downstream transmission rate of 24 Mbit/s and an upstream transmission rate of 1024 kbit/s ADSL-B: A downstream transmission rate of 8 Mbit/s and an upstream transmission rate of 1024 kbit/s Cable type Regular telephone line Technical Specifications Table 5-88 describes the technical specifications of the ADSL-A/M and ADSL-B. Table 5-88 Technical specifications of the ADSL-A/M and ADSL-B Issue 03 (2012-04-20) Item Specification Dimensions (Depth x Width x Height) 223.5 mm x 100.1 mm x 19.82 mm (8.8 in. x 3.94 in. x 0.78 in.) Maximum power consumption 5.4 W Weight 0.3 kg (0.66 lb) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 118 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards 5.7.2 4G.SHDSL-1-Port-4-Channel G.SHDSL WAN Interface Card The 4G.SHDSL is the G.SHDSL service access module on the AR routers. G.Single-Pair High-Speed Digital Subscriber Line (G.SHDSL) uses trellis coded pulse amplitude modulation (TCPAM), provides up to 5.696 Mbit/s symmetric data rates, and supports 2/3/4-pair binding. The transmission rate can automatically adapt according to the line length and conditions. G.SHDSL provides a longer transmission distance than ADSL. Functions and Applications Functions The 4G.SHDSL provides 4-channel G.SHDSL access and the independent CPU as well as management interfaces. The 4G.SHDSL consists of the following modules: CPU control module: manages the system and loads programs. G.SHDSL module: processes G.SHDSL services on CPEs. GE upstream module: provides one upstream interface to communicate with the active and standby SRUs. Power supply module: conducts power from backplane to card. Clock module: provides three types of working clocks for cards. Applications The 4G.SHDSL can be installed into the SIC slot of the AR1200, AR2220, AR2240 and AR3260. Panel and Interfaces Figure 5-27 shows the appearance of the 4G.SHDSL. Figure 5-27 Appearance of the 4G.SHDSL Buttons and Indicators on the Panel Table 5-89 describes the buttons and indicators on the 4G.SHDSL panel. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 119 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Table 5-89 Buttons and indicators on the 4G.SHDSL panel Number in Figure 5-27 Indicator Color Description STAT Green If the indicator blinks once 2s (0.5 Hz), the system is running properly. If the indicator blinks once 0.25s (4 Hz), the system is powering on or restarting. LINK Red If the indicator is red, a fault that affects services occurs and cannot be rectified automatically. The fault needs to be rectified manually. Off If the indicator is off, the software is not running or is being reset. Green If the indicator is steady on, the four DSL channels have been activated. If the indicator is off, the four DSL channels have not been activated. l If the indicator is on for 0.25 seconds and blinks three times in the next 0.75 seconds, the DSL channel has been activated. l If the indicator is on for 0.5 seconds and blinks twice in the next 0.5 seconds, the two DSL channels have been activated. l If the indicator is on for 0.75 seconds and blinks in the next 0.25 seconds, the three DSL channels have been activated. ACT Yellow If the indicator is blinking, data is being transmitted or received. If the indicator is off, no data is being transmitted or received. Interfaces Table 5-90 describes the types and functions of interfaces on the 4G.SHDSL. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 120 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Table 5-90 Types and functions of interfaces on the 4G.SHDSL Letter in Figure 5-27 Name Qua ntity Description Cable Type G.SHDSL (RJ45) The 4G.SHDSL provides one RJ45 interface, which supports standard network cables. 6.9 4G.SHDSL Cables or 6.5 Network Cable Interface Attributes Table 5-91 Attributes of G.SHDSL interfaces Attribute Description Connector type One RJ45 connector on one end and four RJ11 connectors on the other end Standards compliance G.SHDSL.bit Transmission rate 5.696 Mbit/s per pair Technical Specifications Table 5-92 describes the technical specifications of the 4G.SHDSL. Table 5-92 Technical specifications of the 4G.SHDSL Item Specification Dimensions (Depth x Width x Height) 223.5 mm x 100.1 mm x 19.82 mm (8.8 in. x 3.94 in. x 0.78 in.) Maximum power consumption 8.2 W Weight 0.35 kg (0.78 lb) 5.7.3 1PON (1-Port GPON/EPON Dual-Mode Interface Card) The 1PON card is the EPON/GPON auto-sensing module on the AR routers. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 121 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards NOTE 1 port: There are two ports on the 1PON card, one of which is the backup port. Therefore, the 1PON card is also called the 1PON. The 1PON card functions as the ONU of the EPON/GPON system: Receives cells broadcast in TDM mode at a downlink rate of 1.25 Gbit/s (EPON) or 2.488 Gbit/s (GPON). Supports burst transmission in TDMA mode at an uplink rate of 1.25 Gbit/s (EPON) or 1.244 Gbit/s (GPON). Functions and Applications Functions The 1PON card works with the main control board and supports two PON SFP uplink interfaces. The 1PON card has the following functions: Supports OLT clock synchronization but not the 1588 function. Supports EPON/GPON but not GE. Supports the DyingGasp function. Supports rogue ONT detection and isolation. Detects the receiving optical power. Supports delayed reset. Applications The 1PON card is installed into the SIC slot of the AR1200, AR2220, AR2240 and AR3260. Panel and Interfaces Figure 5-28 shows the appearance of the 1PON panel. Figure 5-28 Appearance of the 1PON panel Buttons and Indicators on the Panel Table 5-93 describes the buttons and indicators on the 1PON panel. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 122 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Table 5-93 Buttons and indicators on the 1PON panel Number in Figure 5-28 Indicator Color Description STAT Green If the indicator blinks once 2s (0.5 Hz), the system is running properly. If the indicator blinks once 0.25s (4 Hz), the system is powering on or restarting. 2 and 3 PON interface indicators: l The LINK indicator indicates whether the PON card is requesting data transmission. l The AUTH indicator indicates the authentication status. Red If the indicator is red, a fault that affects services occurs and cannot be rectified automatically. The fault needs to be rectified manually. Off If the indicator is off, the software is not running or is being reset. Green If both the LINK indicator and AUTH indicator are steady on, the 1PON card is registered successfully. If the LINK indicator is steady on and the AUTH indicator blinks once 0.25s (4 Hz), the 1PON card is being registered. If both the LINK indicator and AUTH indicator blink once 0.25s (4 Hz), the 1PON card keeps requesting data transmission. When this occurs, the 1PON card is a rogue ONU. If both the LINK indicator and AUTH indicator are off, the 1PON card does not request data transmission. Interfaces Table 5-94 describes the types and functions of interfaces on the 1PON card. Table 5-94 Types and functions of interfaces on the 1PON card Issue 03 (2012-04-20) Letter in Figure 5-28 Name Qua ntity Description Cable Type PON interface The 1PON card provides EPON/GPON interfaces that are connected using SC/PC fibers. 6.6 Optical Fiber Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 123 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Interface Attributes Table 5-95 Attributes of the SFP optical module supported by the PON optical interface Attribute Description Connector type SC/PC connector (SFP encapsulation) Transport mode Single-mode bidirectional Transmission rate l Downstream transmission rate of 2488 Mbit/s l Upstream transmission rate of 1244 Mbit/s Standards compliance ITU-T G.984.2 CLASS B+ ITU-T G.984.5 WBF Sending end Center wavelength 1290 nm to 1330 nm Average transmitting optical power 0.5 dBm to 5 dBm Average turn-off optical power -45 dBm Side-mode 30 dB suppression ratio Receivin g end Extinction ratio 10 dB to 15 dB Overload power -8 dBm Input wavelength range 1480 nm to 1500 nm Operating temperature 0°C to 70°C Technical Specifications Table 5-96 describes the technical specifications of the 1PON card. Table 5-96 Technical specifications of the 1PON card Issue 03 (2012-04-20) Item Specification Dimensions (depth x width x height) 223.5 mm x 100.1 mm x 19.82 mm Maximum power consumption 8.72 W Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 124 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Item Specification Weight 0.3 kg 5 Cards 5.7.4 VDSL (1-Port VDSL2 over POTS WAN Interface Card) The VDSL interface card provides an interface for VDSL2 access. Functions and Applications Functions The VDSL interface card is used for packet switching and device management. It supports the following functions: Works in VDSL2 mode that complies with ITU-T G.993.2 and supports profile 17a defined in G.993.2. Rolls back to ADSL2+ mode that complies with G.992.5. Supports temperature and power measurement. Sends a dying gasp alarm in the case of a power failure. The VDSL interface card consists of the following modules: ADSL2/VDSL2 socket: implements ADSL2/VDSL2 modulation and demodulation on customer premises equipment (CPE). Storage module: stores data and programs on the interface card. GE uplink interface module: provides a GE uplink interface to receive and transmit data. The SRU manages the interface through this GE interface. Temperature and power module: measures temperature and power on the interface card. Clock resetting module: provides signals to reset the system clock. Applications The VDSL interface card can be installed in the SIC slot on the AR1200, AR2220, AR2240, and AR3260 chassis. Panel and Interfaces Figure 5-29 shows the appearance of the VDSL interface card. Figure 5-29 VDSL panel Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 125 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Buttons and Indicators on the Panel Table 5-97 describes the buttons and indicators on the VDSL panel. Table 5-97 Buttons and indicators on the VDSL panel Number in Figure 5-29 Indicator Color Description STAT Green If the indicator is steady on, the router has been powered on, but the system software is not running. If the indicator blinks once every 2s (0.5 Hz), the system is running properly. If the indicator blinks once every 0.25s (4 Hz), the system is loading software after power-on or is restarting. LINK Red If the indicator is steady on, a fault that affects services has occurred and cannot be rectified automatically. The fault needs to be rectified manually. Off If the indicator is off, the software is not running or is being reset. Green If the indicator is steady on, the VDSL channel has been activated. If the indicator is off, the VDSL channel has not been activated. If the indicator blinks once every 0.25s (4 Hz), the VDSL channel is being activated. Interfaces Table 5-98 describes the types and functions of interfaces on the VDSL interface card. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 126 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 5 Cards Table 5-98 Types and functions of interfaces on the VDSL interface card Letter in Figure 5-29 Name Quanti ty Description Cable Type VDSL2 (RJ11) The VDSL interface card provides an RJ11 interface, which connects to a DSLAM through a telephone cable. 6.11 Regular Telephone Lines Interface Attributes Table 5-99 VDSL interface attributes Item Description Connector RJ11 Standards compliance VDSL standards: ITU-T 993.2 ITU-T 992.5 ITU-T 992.3 ITU-T 992.1 G.DMT l ADSL2+ full rate mode (ITU-T 992.3): a downstream transmission rate of 12 Mbit/s and an upstream transmission rate of 1 Mbit/s Rate l VDSL2 mode (ITU-T 993.2): a downstream transmission rate of 100 Mbit/s and an upstream transmission rate of 50 kbit/s l ADSL2 full rate mode (ITU-T 992.5): a downstream transmission rate of 24 Mbit/s and an upstream transmission rate of 1 Mbit/s l ADSL full rate mode (ITU-T 992.1 G.DMT): a downstream transmission rate of 8 Mbit/s and an upstream transmission rate of 1 Mbit/s Telephone cable Cable type Technical Specifications Table 5-100 describes the technical specifications of the VDSL interface card. Table 5-100 Technical specifications of the VDSL interface card Issue 03 (2012-04-20) Parameter Description Dimensions (W x D x H) 100.1 mm x 223.5 mm x 19.82 mm Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 127 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Issue 03 (2012-04-20) Parameter Description Maximum power consumption 7.6 W Weight 0.2 kg Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 5 Cards 128 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Cables About This Chapter This chapter describes the cables used by the AR routers, including the structures and technical specifications of the cables. 6.1 AC Power Cable An AC power cable transmits AC power to the switch. 6.2 DC Power Cables A DC power cable transmits DC power to the switch. 6.3 Ground Cable A ground cable protects the device from lightning strike and electromagnetic interference. 6.4 Console Cable A console cable is used to debug or maintain a local device. 6.5 Network Cable A network cable subtends devices, enables a device to communication with other network devices, and allows users to locally or remotely maintain the device. 6.6 Optical Fiber An optical fiber connects the optical interface of a device to an upstream device or optical network terminal. 6.7 E1/T1 Trunk Cables This section describes the structure and technical specifications of the E1/T1 trunk cable. 6.8 Synchronous/Asynchronous Serial Interface Cables This section describes the categories, structure, and technical specifications of the synchronous/ asynchronous serial interface cable. 6.9 4G.SHDSL Cables This section describes the structure and technical specifications of the 4G.SHDSL cable. 6.10 ISDN-ST Cables This section describes the categories, structure, and technical specifications of the ISDN-ST cable. 6.11 Regular Telephone Lines Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 129 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables This section describes the structure and technical specifications of the regular telephone line. 6.12 8AS Cable An 8AS cable is connected to an 8AS interface card to commission or maintain the 8AS interface card. 6.13 3G Antenna A 3G antenna transmits and receives 3G signals to enable an AR router to communicate with a 3G network. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 130 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables 6.1 AC Power Cable An AC power cable transmits AC power to the switch. Application An AC power cable connects the following: The AC input power jack on the chassis The other end is connected to the AC power supply Appearance Figure 6-1 shows the appearance of the AC power cable. Figure 6-1 Appearance of the AC power cable Specifications NOTE The AC power cables used in different countries and regions may have different specifications. The following are the specifications of the international standard AC power cable. Table 6-1 lists the specifications of the AC power cable. Table 6-1 Specifications of the AC power cable Issue 03 (2012-04-20) Item Description Cable type External power cable Function 250 V AC/10 A complying with international standard Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 131 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Item Description Connector 1 PI-straight-male Connector 2 C13-straight-female Cable type l 227 IEC 53 (RVV)-300 V/500 V 6 Cables l Rated voltage: 300 V/500 V l Standards compliance: 227 IEC 53 (RVV) Conductor cross-sectional area 3 x 1.0 mm2 (3 x 0.00155 in.2) Fireproof level GB18380.1 6.2 DC Power Cables A DC power cable transmits DC power to the switch. Applications A DC power cable connects the following two interfaces: Input power jack on the chassis Output power interface on an external power system NOTE A black -48 V DC power return wire (RTN) is connected to the RTN(+) end of the DC power supply. A blue -48 V DC power cable is connected to the NEG(-) end of the DC power supply. Appearance and Structure The black -48 V DC power return wire and the blue -48 V DC power cable are shown in Figure 6-2 and Figure 6-3. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 132 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Figure 6-2 -48 V DC power return wire Figure 6-3 -48 V DC power cable Specifications The technical specifications of a -48 V DC power return wire and a -48 V DC power cable are the same, as described in Table 6-2. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 133 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Table 6-2 Specifications of the DC power cables Item Description Cable type Power cable Color Blue for -48 V DC power cable and black for -48 V DC power return wire Connector 1 OT Connector 2 Cord end terminal Impedance 4.95 Ω/km Conductor cross-sectional area 1.2 mm2 (0.00186 in.2) 6.3 Ground Cable A ground cable protects the device from lightning strike and electromagnetic interference. Application A ground cable connects the chassis to the ground. Appearance Figure 6-4 shows the appearance of the ground cable. Figure 6-4 Appearance of the ground cable Specifications Table 6-3 lists the specifications of the ground cable. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 134 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Table 6-3 Specifications of the ground cable Item Description Cable type Power cable Color Green-yellow Connector type (X1/X2) OT/OT naked crimping terminal Gauge 10 AWG (cross-sectional area ≈ 5.2 mm2 [0.0081 in.2]) Cable type l Standards compliance: H07Z-K UL3386 l Length: 0.3 m Maximum current 50.0 A Fireproof level VW-1, CSA FT1 6.4 Console Cable A console cable is used to debug or maintain a local device. Application A console cable connects the console port of the device to the serial port of an operation terminal to transmit configuration data. A shielded cable or an unshielded cable can be used according to the onsite situation. A console cable connects the device and terminal as follows: The 8-pin RJ45 connector is inserted into the console port of the device. The DB9 male connector is connected to an operation terminal, which is usually a PC. Appearance and Structure Figure 6-5 shows the structure of the console cable. Figure 6-5 Structure of the console cable D-type connector (9-pin, male) Pos.9 Label Pos.5 Network port connector (8-pin, RJ-45) X2 Pos.6 Issue 03 (2012-04-20) Pos.1 1 8 X1 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 135 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Pin Assignments Table 6-4 describes the pin assignments of the console cable. Table 6-4 Pin assignments of the console cable Connector X1(DB9) X2(RJ45) Pin assignment Specifications Table 6-5 lists the specifications of the console cable. Table 6-5 Specifications of the console cable Item Description Connector type l Connector X1: cable connector, D-type, 9-pin, male l Connector X2: network interface connector, RJ45, 8pin, 8-bit, male Cable type Twisted pair Color PANTONE WARM GRAY 1U Diameter 0.32 mm (0.13 in.) Gauge 28 AWG (cross-sectional area ≈ 0.08 mm2 [0.0002 in. 2]) Pin 2 pairs Length 3 m (9.85 ft.) 6.5 Network Cable A network cable subtends devices, enables a device to communication with other network devices, and allows users to locally or remotely maintain the device. Application A network cable connects a maintenance terminal to the console port on the main control board for local or remote maintenance. The network cables are classified into straight-through cables and crossover cables. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 136 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Pin Assignments Table 6-6 describes the pin assignments of the straight-through cable. Table 6-6 Pin assignments of the straight-through cable X1 Pin Tip Color X2 Pin White and orange Orange White and Green Blue White and Blue Green White and brown Brown Table 6-7 describes the pin assignments of the crossover cable. Table 6-7 Pin assignments of the crossover cable X1 Pin Tip Color X2 Pin White and orange Orange White and Green Blue White and Blue Green White and brown Brown NOTE To achieve the optimum electrical transmission performance, ensure that the wires connected to pins 1 and 2 and to pins 3 and 6 are twisted pairs. Specifications Table 6-8 lists the specifications of the network cable. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 138 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Table 6-8 Specifications of the network cable Item Description Connector type (X1/X2) RJ45 connectors Cable type Category-3 and category-5 unshielded twisted pairs (UTP-3 and UTP-5) or shielded twisted pairs (STP) Color Dark gray Characteristic impedance 100.0 Ω Diameter 0.510 mm (0.02 in.) Breakdown voltage 500.0 V Impedance 93.8 Ω Pin 8 pins Frequency 0 MHz to 100 MHz Frequency attenuation 22 dB/100 m@100 MHz Fireproof level CM Length l Straight through cable: 5 meters (16.4 ft.), 10 meters (32.8 ft.), 20 meters (65.6 ft.), and 30 meters (98.5 ft.) l Crossover cable: 5 meters (16.4 ft.) and 30 meters (98.5 ft.) 6.6 Optical Fiber An optical fiber connects the optical interface of a device to an upstream device or optical network terminal. Application An optical fiber carries optical signals and transmits them over short distance. An optical fiber connects the following: The optical interface on a board The optical distribution frame (ODF) or the optical interface on another device Table 6-9 lists the classification of optical fibers. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 139 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Table 6-9 Optical fiber classification No. Purpose Local End Connector Remote End Connector Mode To connect LPU of the device to the ODF LC/PC FC/PC Single mode, indoor To connect LPUs of two devices LC/PC LC/PC Single mode/ multimode, indoor To connect LPU of the device to another device LC/PC SC/PC or LC/ PC Single mode/ multimode, indoor Appearance The appearances of the single-mode optical fiber and the multimode optical fiber are the same, but their colors are different. The single-mode optical fiber is yellow, and the multi-mode optical fiber is orange. CAUTION When connecting or removing the LC/PC optical connector, align the connector with the optical interface, and do not rotate the fiber. Pay attention to the following points: l Align the head of the fiber jumper with the optical interface and insert the optical fiber into the interface gently. l To remove the fiber, press the latch on the connector and pull the fiber out. Figure 6-8 and Figure 6-9 show the appearances of the single mode fiber. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 140 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Figure 6-8 Single mode fiber with LC/PC connectors Figure 6-9 Single mode fiber with SC/PC connectors Figure 6-10 shows the appearance of the multimode fiber. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 141 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Figure 6-10 Multimode fiber with LC/PC connectors Pin Assignments Table 6-10 describes the pin assignments of the optical fiber. Table 6-10 Pin assignments of the optical fiber Local End Terminal Signal Direction Remote End Terminal Optical interface Tx terminal -> Optical interface Rx terminal Optical interface Rx terminal <- Optical interface Tx terminal Fiber Selection Criterion Table 6-11 lists the criteria for selecting optical fibers. Table 6-12 lists common optical connectors. Table 6-11 Fiber selection criterion Issue 03 (2012-04-20) Parameter Criterion Length Onsite survey result Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 142 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Parameter Criterion Single mode or multimode Optical module type 6 Cables l The optical transmitting module of the multitransverse mode is connected to the multimode fiber. l The optical transmitting module of the single-longitudinal mode or multi-longitudinal mode is connected to the single mode fiber. NOTE If the optical fiber jumper is used, the connector connected to the device must be the LC/PC connector, and the connector connected to the remote end must be of the same type as the remote end interface. Connector shape l Cube: SC/PC, LC/PC, and MTRJ/PC l Column: ST/PC and FC/PC Table 6-12 Common optical connectors SC/PC optical connector FC/PC optical connector LC/PC optical connector MTRJ/PC optical connector ST/PC optical connector 6.7 E1/T1 Trunk Cables This section describes the structure and technical specifications of the E1/T1 trunk cable. Introduction E1 trunk cables are classified into 75-ohm unbalanced coaxial cables and 120-ohm balanced twisted pair cables. The connectors of the cables are as follows: 75-ohm unbalanced coaxial cable (DB9 to BNC): – One end provides a DB9 connector. – The other end provides two BNC connectors. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 143 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables 120-ohm balanced twisted pair cable (DB9 to RJ45): – One end provides a DB9 connector. – The other end provides an RJ45 connector. A T1 trunk cable is a 100-ohm balanced twisted pair cable. Its appearance is the same as the appearance of an E1 120-ohm balanced twisted pair cable. Appearance and Structure Figure 6-11 shows the appearance of an E1 75-ohm unbalanced coaxial cable. Figure 6-11 Appearance of an E1 75-ohm unbalanced coaxial cable Figure 6-12 shows the appearance of the E1 120-ohm or T1 100-ohm balanced twisted pair cable. Figure 6-12 Appearance of the E1 120-ohm or T1 100-ohm balanced twisted pair cable Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 144 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Figure 6-13 shows the structure of an E1 75-ohm unbalanced coaxial cable. Figure 6-13 Structure of an E1 75-ohm unbalanced coaxial cable BNC connector D-type connector (9-pin, male) Pos.6 Label 1 Main Label Pos.1 X2 X3 Pos.9 X1 Pos.5 Label 2 BNC connector Figure 6-14 shows the structure of the E1 120-ohm or T1 100-ohm balanced twisted pair cable. Figure 6-14 Structure of the E1 120-ohm or T1 100-ohm balanced twisted pair cable D-type connector (9-pin, male) Pos.6 Label Pos.1 Network port connector (8-pin, RJ-45) X2 Pos.9 X1 Pos.5 Pin Assignments Table 6-13 describes the pin assignments of an E1 75-ohm unbalanced coaxial cable. Table 6-13 Pin assignments of an E1 75-ohm unbalanced coaxial cable Connector X1 (DB9) BNC Connector Pin assignment X2 X3 Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 145 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Table 6-14 describes the pin assignments of the E1 120-ohm or T1 100-ohm balanced twisted pair cable. Table 6-14 Pin assignments of the E1 120-ohm or T1 100-ohm balanced twisted pair cable Connector X1 (DB9) X2 (RJ45) Tip Color Pin assignment White and orange Orange White and Blue Blue E1/T1 Trunk Cable Extension NOTE The E1/T1 trunk cable is 3 m long. If the connection distance is long, a cable extension is required. l E1 75-ohm unbalanced coaxial cable: BNC to BNC (The two connectors are BNC 75 angle male-II.) l E1 120-ohm or T1 100-ohm balanced twisted pair cable: RJ45 to RJ45 (The two connectors are RJ45.) The E1 75-ohm unbalanced coaxial cable is connected as follows: If the E1 trunk cable extension is not used, the BNC connector is connected to the remote device. If the E1 trunk cable extension is used, the BNC connector is connected to a coaxial connector, and the coaxial connector is connected to the remote device through the cable extension, as shown in Figure 6-15. CAUTION The Tx end of the E1 trunk cable is connected to the Rx end of the remote device, and the Rx end is connected to the Tx end. Figure 6-15 E1 75-ohm unbalanced coaxial cable extension DB9 connector Router E1 75-ohm unbalanced coaxial cable Issue 03 (2012-04-20) BNC BNC Coaxial connector DDN E1 75-ohm cable extension Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 146 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables The E1 120-ohm or T1 100-ohm balanced twisted pair cable is connected as follows: If the E1/T1 trunk cable extension is not used, the RJ45 connector is connected to the RJ45 interface of the remote device. If the E1/T1 trunk cable extension is used, the RJ45 connector is connected to a network interface connector, and the network interface connector is connected to the remote device through the cable extension, as shown in Figure 6-16. Figure 6-16 E1 120-ohm or T1 100-ohm balanced twisted pair cable extension DB9 connector Router RJ45 RJ45 DDN E1 120-ohm and Network T1 100-ohm E1 120-ohm and interface balanced T1 100-ohm connector twisted pair cable extension Specifications Table 6-15 lists the specifications of the E1/T1 trunk cable. Table 6-15 Specifications of the E1/T1 trunk cable Item Description Characteristic impedance l E1 75-ohm unbalanced coaxial cable: 75 ohm l E1 120-ohm balanced twisted pair cable: 120 ohm l T1 100-ohm balanced twisted pair cable: 100 ohm Cable type l E1 75-ohm unbalanced coaxial cable: coaxial cable l E1 120-ohm or T1 100-ohm balanced twisted pair cable: balanced twisted pair cable Color l E1 75-ohm unbalanced coaxial cable: PANTONE WARM GREY 1U l E1 120-ohm or T1 100-ohm balanced twisted pair cable: PANTONE 430U Diameter l E1 75-ohm unbalanced coaxial cable: 0.254 mm (0.01 in.) l E1 120-ohm or T1 100-ohm balanced twisted pair cable: 0.4 mm (0.016 in.) Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 147 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Item Description Gauge l E1 75-ohm unbalanced coaxial cable: 30 AWG l E1 120-ohm or T1 100-ohm balanced twisted pair cable: 26 AWG l E1 75-ohm unbalanced coaxial cable: SYFVZP-75-1-1*4 Cores l E1 120-ohm or T1 100-ohm balanced twisted pair cable: SEYVP-120 6.8 Synchronous/Asynchronous Serial Interface Cables This section describes the categories, structure, and technical specifications of the synchronous/ asynchronous serial interface cable. Introduction A synchronous/asynchronous serial interface cable is connected as follows: The DB28 connector is connected to the DB28 port on a card. Another end depends on the connected device: – If the wide area network (WAN) uses the DDN line, the cable is connected to the CSU/ DSU. – If the WAN uses the dial-up line, the cable is connected to the modem. Cable Category CAUTION Verify that devices are connected using appropriate synchronous/asynchronous serial interface cables. Appropriate cable type is determined based on device connection mode (such as synchronous/asynchronous and DTE/DCE modes), signals used by the connected device, baud rate, and clock. Table 6-16 lists the categories of synchronous/asynchronous serial interface cables. Table 6-16 Categories of synchronous/asynchronous serial interface cables Issue 03 (2012-04-20) Cable Local End Connector Network-side Connector V.24 DTE cable DB28 connector DB25 (male) connector V.24 DCE cable DB25 (female) connector V.35 DTE cable DB28 (male) connector Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 148 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Cable Local End Connector 6 Cables Network-side Connector V.35 DCE cable DB28 (female) connector X.21 DTE cable DB15 (male) connector RS449 DTE cable DB28 (male) connector RS449 DCE cable DB28 (female) connector RS530 DTE cable DB25 (male) connector RS530 DCE cable DB25 (female) connector Appearance Figure 6-17 shows the appearance of the V.24 DTE cable. Figure 6-17 Appearance of the V.24 DTE cable Figure 6-18 shows the appearance of the V.24 DCE cable. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 149 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Figure 6-18 Appearance of the V.24 DCE cable Figure 6-19 shows the appearance of the V.35 DTE cable. Figure 6-19 Appearance of the V.35 DTE cable Figure 6-20 shows the appearance of the V.35 DCE cable. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 150 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Figure 6-20 Appearance of the V.35 DCE cable Figure 6-21 shows the appearance of the X.21 DTE cable. Figure 6-21 Appearance of the X.21 DTE cable Figure 6-22 shows the appearance of the RS449 DTE cable. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 151 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Figure 6-22 Appearance of the RS449 DTE cable Figure 6-23 shows the appearance of the RS449 DCE cable. Figure 6-23 Appearance of the RS449 DCE cable Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 152 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Figure 6-24 shows the appearance of the RS530 DTE cable. Figure 6-24 Appearance of the RS530 DTE cable Figure 6-25 shows the appearance of the RS530 DCE cable. Figure 6-25 Appearance of the RS530 DCE cable Specifications Table 6-17 lists the specifications of the synchronous/asynchronous serial interface cable. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 153 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Table 6-17 Specifications of the synchronous/asynchronous serial interface cable Item Description Characteristic impedance 100 ohm Cable type Twisted pair Transmission rate l V.24: 1200 bit/s to 64 kbit/s l V.35/X.21/RS449/RS530: 1200 bit/s to 2.048 Mbit/ Color Dark blue (PANTONE 296U) Diameter l V.24 DTE/DCE cable, V.35 DTE/DCE cable, and X. 21 DTE cable: 0.38 mm (0.015 in.) l RS449 DTE/DCE cable and RS530 DTE/DCE cable: 0.32 mm (0.013 in.) Gauge 28 AWG Pin l V.24 DTE/DCE cable, V.35 DTE/DCE cable, X.21 DTE cable: 5 pairs + 8 pins l RS449 DTE/DCE cable and RS530 DTE/DCE cable: 26 pins 6.9 4G.SHDSL Cables This section describes the structure and technical specifications of the 4G.SHDSL cable. Introduction The connectors of a 4G.SHDSL cable are as follows: Four RJ11 connectors on the local end An RJ45 connector on the network side Appearance and Structure Figure 6-26 shows the appearance of the 4G.SHDSL cable. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 154 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Figure 6-26 Appearance of the 4G.SHDSL cable Figure 6-27 shows the structure of the 4G.SHDSL cable. Figure 6-27 Structure of the 4G.SHDSL cable 6-pin connector Label 1 Network port connector (8-pin, RJ-45) Main Label X2 Label 2 X3 X1 Label 3 X4 Label 4 X5 Pin Assignments Table 6-18 describes the pin assignments of the 4G.SHDSL cable. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 155 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Table 6-18 Pin assignments of the 4G.SHDSL cable Connector X1 (RJ45) X2/X3/X4/X5 (RJ11) Tip Color Pin assignment 1 (LINE1 A) 2.3 White and orange 2 (LINE1 B) 2.4 Orange 3 (LINE2 A) 3.3 White and Green 6 (LINE2 B) 3.4 Green 4 (LINE0 A) 4.3 White and Blue 5 (LINE0 B) 4.4 Blue 7 (LINE3 A) 5.3 White and brown 8 (LINE3 B) 5.4 Brown NOTE As shown in Table 6-18, the 4G.SHDSL cable uses standard pin assignments. A cable has four ports, each of them has two lines (A/B). The two lines in a port can be assigned in any sequence, but the line pairs must be assigned in certain sequence. Specifications Table 6-19 lists the specifications of the 4G.SHDSL cable. Table 6-19 Specifications of the 4G.SHDSL cable Item Description Characteristic impedance 100 ohm Cable type Category 5 twisted pairs Color PANTONE 430U Diameter 0.51 mm (0.02 in.) Gauge 24 AWG Pin 8 pins 6.10 ISDN-ST Cables This section describes the categories, structure, and technical specifications of the ISDN-ST cable. Introduction ISDN-ST cables are classified into the following types: Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 156 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Figure 6-29 Appearance of an ISDN S/T interface crossover cable Figure 6-30 shows the structure of an ISDN S/T interface crossover cable. Figure 6-30 Structure of an ISDN S/T interface crossover cable Network port connector Label (8-pin, RJ-45, male) 1 8 Network port connector (8-pin, RJ-45, female) X1 X2 Pin Assignments Table 6-20 describes the pin assignments of the standard ISDN S/T interface cable. Pins 3 and 6 are the sending end, and pins 4 and 5 are the receiving end. Table 6-20 Pin assignments of the standard ISDN S/T interface cable Issue 03 (2012-04-20) RJ45 Signal RJ45 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 158 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables RJ45 Signal RJ45 Tx+ Rx+ Rx- Tx- Table 6-21 describes the pin assignments of the ISDN S/T interface crossover cable. Pins 4 and 5 are the sending end, and pins 3 and 6 are the receiving end. Table 6-21 Pin assignments of the standard ISDN S/T interface crossover cable RJ45 (TE) Signal RJ45 (NT) Tx+ Rx+ Rx- Tx- Technical Specifications Table 6-22 lists the technical specifications of an ISDN-ST cable. Table 6-22 Technical specifications of an ISDN-ST cable Issue 03 (2012-04-20) Item Specification Characteristic impedance 100 ohm Cable Category 5 twisted pairs Color PANTONE 430U Diameter 0.51 mm (0.02 in.) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 159 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Item Specification Gauge 24 AWG Impedance 93.8 ohm Pin 8 pins 6.11 Regular Telephone Lines This section describes the structure and technical specifications of the regular telephone line. Introduction The regular telephone line is connected as follows: The RJ11 connector is connected to a device such as a phone and fax machine. Another RJ11 connector is connected to the voice card of the AR1200. Appearance Figure 6-31 shows the appearance of the regular telephone line. Figure 6-31 Appearance of the regular telephone line 6PIN-RJ11 1 6 6PIN-RJ11 X1 X2 Pin Assignment Table 6-23 provides the pin assignment of a regular telephone line. Table 6-23 Pin assignment of a regular telephone line X1 Pin Wire Color X2 Pin Remarks Red Tip(+) Green Ring(-) Specifications Table 6-24 lists the specifications of the regular telephone line. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 160 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Table 6-24 Specifications of the regular telephone line Item Description Dielectric strength 150 V Maximum current 1A Impedance 237.25 ohm Cable type UL20251 Color White Gauge 28 AWG Pin 2 pins 6.12 8AS Cable An 8AS cable is connected to an 8AS interface card to commission or maintain the 8AS interface card. Introduction An 8AS cable connects the console port on an 8AS interface card to the serial port of an operation terminal. You can use shield cables or unshielded cables as required in different scenarios. The common usage scenarios of 8AS cables are: To connect an 8AS interface card to automatic teller machines in a bank, use shield straightthrough cables. You can buy shield straight-through cables from Huawei or made these cables onsite. To connect an 8AS interface card to a dumb terminal, use a transit cable and a shield straight-through cable. A transit cable has an RJ45 plug on one end and an RJ45 socket on the other end. The transit cable converts the pin assignments on the dumb terminal to the standard pin assignments, which are the same as those on the straight-through cable. Then the straight-through cable can connect to the dumb terminal. To connect an 8AS interface card to a serial port device, such as a PC or modem, use an asynchronous serial cable and a transit cable. One end of an asynchronous serial cable is an RJ45 socket, and the other end has a DB25 plug and a DB9 plug. The asynchronous serial cable connects to the PC or modem through the transit cable. NOTE Huawei can customize 8AS cables of specified length. Straight-through cable Figure 6-32 shows the appearance of a straight-through cable. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 161 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables X1 Pin (8AS) X2 Pin (Console) Table 6-8 lists the technical specifications of a straight-through cable. Transit Cable Figure 6-34 shows the appearance of a transit cable. Figure 6-34 Transit cable appearance Figure 6-35 shows the structure of a transit cable. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 163 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Figure 6-35 Transit cable structure Network port connector (8-pin, RJ-45, female) Network port connector Label (8-pin, RJ-45, male) 1 8 X1 X2 Table 6-26 lists the pin assignments of a transit cable. Table 6-26 Pin assignments of a transit cable X1 X2 Table 6-27 lists the specifications of a transit cable. Table 6-27 Specifications of a transit cable Issue 03 (2012-04-20) Item Description Characteristic impedance 100 ohm Cable type Category 5 twisted pairs Color PANTONE 430U Core diameter of the inner conductor 0.51 mm Wire gauge of the inner conductor 24 AWG DC resistance of the inner conductor 93.8 ohm Number of pins Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 164 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Asynchronous Serial Cable Figure 6-36 shows the appearance of an asynchronous serial cable. Figure 6-36 Appearance of an asynchronous serial cable Figure 6-37 shows the structure of an asynchronous serial cable. Figure 6-37 Structure of an asynchronous serial cable D-type connector (25-pin, male) Pos.14 Label Pos.1 Network port connector (8-pin, RJ-45) 1 8 X2 Pos.25 Pos.13 X1 X3 Pos.6 Pos.1 Pos.9 Pos.5 D-type connector (9-pin, male) Table 6-28 lists the pin assignments of an asynchronous serial cable. Table 6-28 Pin assignments of an asynchronous serial cable Issue 03 (2012-04-20) X1 X2 X3 Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 165 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables X1 X2 X3 20 Table 6-29 lists the specifications an asynchronous serial cable. Table 6-29 Specifications of an asynchronous serial cable Item Description Connector l Connector X1: cable connector, D-type, 25-pin, male l Connector X2: network interface connector, RJ45, 8-pin, 8-bit l Connector X3: cable connector, D-type, 9-pin, male Cable type Symmetrical twisted pair Color PANTONE WARM GRAY 1U Core diameter of the inner conductor 0.32 mm Wire gauge of the inner conductor 28 AWG (cross-sectional area approximately equal to 0.08 mm2) Number of pins 2 pairs Length 3m 6.13 3G Antenna A 3G antenna transmits and receives 3G signals to enable an AR router to communicate with a 3G network. Introduction The antenna interfaces on a 3G-HSPA+7 interface card can connect to whip antennas and indoor remote antennas. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 166 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Whip antennas are directly installed on an AR router and are recommended when a router is desk installed or wall mounted. Indoor remote antennas have a 3 m long feed line and can use two 6 m feed lines to expand the length to 15 m. Indoor remote antennas are recommended when an AR router is installed in a cabinet or rack. (Indoor remote antennas need to be ordered separately if needed.) Whip Antenna Figure 6-38 shows the appearance of a whip antenna. Figure 6-38 Whip antenna Table 6-30 lists the technical specifications of a whip antenna. Table 6-30 Technical specifications of a whip antenna Issue 03 (2012-04-20) Item Description Connector SMA-J Color Black Characteristic impedance 50 ohm Length 150 mm Frequency 824 MHz to 960 MHz/1710 MHz to 2170 MHz Maximum power 10 W Operating temperature -40°C to +70°C Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 167 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Item Description Relative humidity 5% RH to 90% RH, non-condensing Gain l 824 MHz to 960 MHz: 1d Bi l 1710 MHz to 2170 MHz: 2 dBi Voltage standing wave ratio <3 Remote Antenna Figure 6-39 shows the appearance of a remote antenna. Figure 6-39 Remote antenna Table 6-31 lists the technical specifications of a remote antenna. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 168 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 6 Cables Table 6-31 Technical specifications of a remote antenna Item Description Connector SMA-Male Color Black Characteristic impedance 50 ohm Height 260 mm Frequency 824 MHz to 960 MHz/1710 MHz to 2170 MHz Maximum power 50 W Operating temperature -40°C to +90°C Gain l 824 MHz to 960 MHz: 1 dBi l 1710 MHz to 2170 MHz: 2.5 dBi Issue 03 (2012-04-20) Voltage standing wave ratio < 2.5 Attenuation < 0.3 dB on each meter of feed line (within the working frequency band) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 169 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 7 List of Indicators List of Indicators About This Chapter This chapter describes the status and meanings of indicators on the AR routers, including indicators on the front and rear panels, cards, fan modules, and power supply units. 7.1 Indicators on the AR1200 Panel This section describes the indicators on the AR1200 panel. 7.2 Indicators on the AR2220 Panel This section describes the indicators on the AR2220 panel. 7.3 Indicators on the AR2240 Panel This section describes the indicators on the AR2240 panel. 7.4 Indicators on the AR3260 Panel This section describes the indicators on the AR3260 panel. 7.5 Fan Module Indicators This section describes the fan module indicators. 7.6 Power Indicators This section describes the power indicators. 7.7 SRU Indicators This section describes the SRU indicators. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 170 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 7 List of Indicators 7.1 Indicators on the AR1200 Panel This section describes the indicators on the AR1200 panel. NOTE l The AR1220V and AR1220 have the same indicators. l The AR1220VW and AR1220W have the same indicators on the front panels. Compared with the AR1220V and AR1220, they have a WLAN indicator and switch button. l The AR1220, AR1220V, AR1220W, and AR1220VW have the same indicators on the rear panels. The AR1220VW is used as an example to describe the indicators. Figure 7-1 shows the indicators on the AR1220VW front panel. Figure 7-1 Indicators on the AR1220VW front panel 4 1 2 5 Table 7-1 describes the indicators on the AR1220VW front panel. Table 7-1 Description of indicators on the AR1220VW front panel Number in Figure 7-1 Indicator Color Description SYS Green If the indicator blinks once 2s (0.5 Hz), the system is running properly. If the indicator blinks once 0.25s (4 Hz), the system is powering on or restarting. Issue 03 (2012-04-20) Red If the indicator is red, a fault that affects services occurs and cannot be rectified automatically. The fault needs to be rectified manually. Off If the indicator is off, the software is not running or is being reset. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 171 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 7 List of Indicators Number in Figure 7-1 Indicator Color Description WAN Green If the indicator is steady on, at least one GE interface has been connected or activated. If the indicator is off, neither GE interface is connected or activated. ACT Red and green If the indicator is green, devices have been deployed by using the USB disk. If the indicator blinks green, data is being read from the USB disk. If the indicator is red, the device cannot be correctly connected to the NMS or cannot be registered with the NMS. If the indicator blinks red, an error occurs when configuration files are being executed or data is being read from the USB disk. If the indicator is off, the USB disk is not inserted, the USB interface fails, or the indicator fails. WLAN Green If the indicator is steady on, the link has been connected or activated. If the indicator blinks (≤20 Hz), the link is transmitting data. If the traffic volume of transmitted data increases, the indicator blinks faster. If the indicator is off, the link is not connected or activated. RST CAUTION The Reset button is used for resetting the device manually. Resetting the device will cause service interruption; therefore, confirm the action before you reset the device. WLAN The button enables and disables the WLAN function. Figure 7-2 shows the indicators on the AR1220VW rear panel. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 172 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 7 List of Indicators Figure 7-2 Indicators on the AR1220VW rear panel 9 10 Table 7-2 describes the indicators on the AR1220VW rear panel. Table 7-2 Description of indicators on the AR1220VW rear panel Number in Figure 7-2 Indicator Color Description EN (CON/ AUX interface) Green If the indicator is steady on, the port is used as a CON/AUX port. NOTE If the indicator is off, the port does not function as a CON/AUX port. l Either the CON/AUX port or the MiniUSB port can be used at a time. l By default, the port is used as the CON/AUX port. The EN indicator is green no matter whether a cable is installed. EN (MiniUSB interface) Green If the indicator is steady on, the port is used as a MiniUSB port. If the indicator is off, the port does not function as a MiniUSB port. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 173 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 7 List of Indicators Number in Figure 7-2 Indicator Color Description 9 and 10 GE interface indicators: l The LINK indicator is in green. l The ACT indicator is in yellow. Green If the indicator is steady on, a link has been established. If the indicator is off, no link is established. Yellow If the indicator is blinking, data is being transmitted or received. If the indicator is off, no data is being transmitted or received. 7.2 Indicators on the AR2220 Panel This section describes the indicators on the AR2220 panel. Figure 7-3 shows the indicators on the AR2220 front panel. Figure 7-3 Indicators on the AR2220 front panel 12 34 5 6 10 Table 7-3 describes the indicators on the AR2220 front panel. Table 7-3 Description of indicators on the AR2220 front panel Number in Figure 7-3 Indicator Color Description SYS Green If the indicator blinks once 2s (0.5 Hz), the system is running properly. If the indicator blinks once 0.25s (4 Hz), the system is powering on or restarting. Issue 03 (2012-04-20) Red If the indicator is red, a fault that affects services occurs and cannot be rectified automatically. The fault needs to be rectified manually. Off If the indicator is off, the software is not running or is being reset. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 174 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 7 List of Indicators Number in Figure 7-3 Indicator Color Description MiniSD card indicator Green If the indicator is steady on, a link has been established. If the indicator is blinking, data is being transmitted or received. If the indicator is off, there is no MiniSD card. 3 and 4 5 and 6 SFP interface indicators: l The LINK indicator is in green. l The ACT indicator is in yellow. Green GE interface indicators: l The LINK indicator is in green. l The ACT indicator is in yellow. Green ACT Red and green If the indicator is steady on, a link has been established. If the indicator is off, no link is established. Yellow If the indicator is blinking, data is being transmitted or received. If the indicator is off, no data is being transmitted or received. If the indicator is steady on, a link has been established. If the indicator is off, no link is established. Yellow If the indicator is blinking, data is being transmitted or received. If the indicator is off, no data is being transmitted or received. If the indicator is green, devices have been deployed by using the USB disk. If the indicator blinks green, data is being read from the USB disk. If the indicator is red, the device cannot be correctly connected to the NMS or cannot be registered with the NMS. If the indicator blinks red, an error occurs when configuration files are being executed or data is being read from the USB disk. If the indicator is off, the USB disk is not inserted, the USB interface fails, or the indicator fails. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 175 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 7 List of Indicators Number in Figure 7-3 Indicator Color Description EN (MiniUSB interface) Green If the indicator is steady on, the port is used as a MiniUSB port. If the indicator is off, the port does not function as a MiniUSB port. EN (CON/ AUX interface) Green NOTE If the indicator is steady on, the port is used as a CON/AUX port. If the indicator is off, the port does not function as a CON/AUX port. l Either the CON/AUX port or the MiniUSB port can be used at a time. l By default, the port is used as the CON/AUX port. The EN indicator is green no matter whether a cable is installed. 10 RST CAUTION The Reset button is used for resetting the device manually. Resetting the device will cause service interruption; therefore, confirm the action before you reset the device. 7.3 Indicators on the AR2240 Panel This section describes the indicators on the AR2240 panel. There is no independent indicator on the AR2240 panel. Indicators on the AR2240 panel are indicators of modules inserted in slots. Indicators on the AR2240 front panel: – 7.6 Power Indicators – 7.7 SRU Indicators Indicators on the AR2240 rear panel: – Indicators of service subcards – 7.5 Fan Module Indicators Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 176 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 7 List of Indicators 7.4 Indicators on the AR3260 Panel This section describes the indicators on the AR3260 panel. There is no independent indicator on the AR3260 panel. Indicators on the AR3260 panel are indicators of modules inserted in slots. Indicators on the AR3260 front panel: – 7.6 Power Indicators – 7.7 SRU Indicators Indicators on the AR3260 rear panel: – Service subcard indicators – 7.5 Fan Module Indicators 7.5 Fan Module Indicators This section describes the fan module indicators. Figure 7-4 shows the fan module indicator of the AR2240. Figure 7-4 Fan module indicator of the AR2240 Indicator Figure 7-5 shows the fan module indicator of the AR3260. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 177 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 7 List of Indicators Figure 7-5 Fan module indicator of the AR3260 Indicator Table 7-4 describes the fan module indicator of the AR2240 and AR3260. Table 7-4 Description of the fan module indicator Indicator Color Description STATUS Red and green If the indicator blinks green once 2s (0.5 Hz), the fan module is operating properly. If the indicator blinks green once 0.25s (4 Hz), the fan module cannot communicate with the device. If the indicator is steady red, the fan module is faulty and an alarm is generated. 7.6 Power Indicators This section describes the power indicators. HW-100-48AC14D Figure 7-6 shows the indicator of the HW-100-48AC14D. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 178 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 7 List of Indicators Figure 7-6 Indicator of the HW-100-48AC14D In d ica to r Table 7-5 Description of the HW-100-48AC14D indicators Indicator Color Description Power indicator Blue If the indicator is steady on, the output power is in the normal range. If the indicator is off, the power supply unit does not have output power. 150 W DC Power Supply Unit Figure 7-7 shows the indicator of the 150 W DC power supply unit. Figure 7-7 Indicator of the 150 W DC power supply unit Indicator Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 179 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 7 List of Indicators Table 7-6 Description of 150 W DC power indicators Name Status Description STATU Off l The input power is out of range, for example, no DC input power, DC input overvoltage, and DC input undervoltage. l The output power is out of range, for example, undervoltage or overtemperature occurs. Green The DC input power is within range. Blinking green The output power is out of range, for example, overvoltage, overcurrent, or short circuit occurs. PWR350D Figure 7-8 shows the indicator of the PWR350D. Figure 7-8 Indicator of the PWR350D Indicator Table 7-7 Description of the PWR350D indicators Name Status Description STATUS Off l The input power is out of range, for example, no DC input power, DC input overvoltage, and DC input undervoltage. l The output power is out of range, for example, undervoltage or overtemperature occurs. Green The DC input power is within range. Blinking green The output power is out of range, for example, overvoltage, overcurrent, and short circuit occurs. PWR150A Figure 7-9 shows the indicator of the PWR150A. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 180 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 7 List of Indicators Figure 7-9 Indicator of the PWR150A Indicator Table 7-8 Description of the PWR150A indicators Indicator Color Description Power indicator (STATUS) Green If the indicator is steady on, the power supply unit functions properly. If the indicator blinks, the output power is out of range, for example, overvoltage, overcurrent, and short-circuit. If the indicator is off, the input power is out of range, for example no AC input, overvoltage, and undervoltage, or the output power is out of range, for example, undervoltage and overtemperature. PWR350A Figure 7-10 shows the indicators of the PWR350A. Figure 7-10 Indicator of the PWR350A Indicator Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 181 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 7 List of Indicators Table 7-9 Description of the PWR350A indicators Indicator Color Description Power indicator (STATUS) Red and green If the indicator is steady green, the input power is in the normal range. If the indicator blinks alternately between red and green, the output power is out of range, for example, when an overvoltage, overcurrent, or short circuit event occurs. In these events, the power supply unit goes into hiccup protection mode. 7.7 SRU Indicators This section describes the SRU indicators. NOTE The SRU40 and SRU80 panels are identical except for having different silkscreens. The following describes the panel and Interfaces of the SRU40. Figure 7-11 shows the SRU indicators. Figure 7-11 SRU indicators 1 2 6556 7 8 7 8 7 8 9 10 11 Table 7-10 Buttons and indicators on the SRU panel Number Indicator Color Description SYS Green If the indicator blinks once 2s (0.5 Hz), the system is running properly. If the indicator blinks once 0.25s (4 Hz), the system is powering on or restarting. Issue 03 (2012-04-20) Red If the indicator is red, a fault that affects services occurs and cannot be rectified automatically. The fault needs to be rectified manually. Off If the indicator is off, the software is not running or is being reset. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 182 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 7 List of Indicators Number Indicator Color Description ACT (active/ standby status indicator) Green If the indicator is green, the SRU is in active state. Micro SD Green If the indicator is off, the SRU is in standby state. If the indicator is steady on, a link has been established. If the indicator is blinking, data is being transmitted or received. If the indicator is off, there is no micro SD card. ACT (USB) Red and green If the indicator is green, devices have been deployed by using the USB disk. If the indicator blinks green, data is being read from the USB disk. If the indicator is red, the device cannot be correctly connected to the NMS or cannot be registered with the NMS. If the indicator blinks red, an error occurs when configuration files are being executed or data is being read from the USB disk. If the indicator is off, the USB disk is not inserted, the USB interface fails, or the indicator fails. 5 and 6 7 and 8 Issue 03 (2012-04-20) SFP interface indicators: l The LINK indicator is in green. l The ACT indicator is in yellow. Green GE interface indicators: l The LINK indicator is in green. l The ACT indicator is in yellow. Green If the indicator is steady on, a link has been established. If the indicator is off, no link is established. Yellow If the indicator is blinking, data is being transmitted or received. If the indicator is off, no data is being transmitted or received. If the indicator is steady on, a link has been established. If the indicator is off, no link is established. Yellow If the indicator is blinking, data is being transmitted or received. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 183 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Number Indicator 7 List of Indicators Color Description If the indicator is off, no data is being transmitted or received. MiniUSB EN Green If the indicator is steady on, the port is used as a MiniUSB port. If the indicator is off, the port does not function as a MiniUSB port. 10 CON/AUX EN NOTE l Either the CON/AUX port or the MiniUSB port can be used at a time. Green If the indicator is steady on, the port is used as a CON/AUX port. If the indicator is off, the port does not function as a CON/AUX port. l By default, the port is used as the CON/AUX port. The EN indicator is green no matter whether a cable is installed. 11 Issue 03 (2012-04-20) RST CAUTION The Reset button is used for resetting cards manually. Resetting a card will cause service interruption; therefore, carefully verify the issue before you reset a card. Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 184 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 8 List of Cards List of Cards About This Chapter This chapter describes the types and technical specifications of cards on the AR routers. 8.1 Cards Supported by the AR This section describes the cards supported by AR routers, including SRUs, Ethernet LAN interface cards, WAN interface cards, voice interface cards, and xDSL/xPON interface cards. 8.2 Power Consumption and Weight This section describes the power consumption and weight of cards supported by the AR routers. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 185 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 8 List of Cards 8.1 Cards Supported by the AR This section describes the cards supported by AR routers, including SRUs, Ethernet LAN interface cards, WAN interface cards, voice interface cards, and xDSL/xPON interface cards. Matching between physical cards and software versions Table 8-1 Matching between physical cards and software versions Model&Version ARV200R001C 00 ARV200R001C 01&ARV200R0 02C00 ARV200R002C 01 Issue 03 (2012-04-20) SIC WSIC XSIC voice card AR1220 √ × × × AR1220 √ × × √ AR2220 √ √ √ × AR2240 √ √ √ × AR3260 √ √ √ × AR1220 √ √ × × AR1220 √ √ × √ AR1220 √ √ × × AR1220 VW √ √ × √ AR2220 √ √ √ √ AR2240 √ √ √ √ AR3260 √ √ √ √ AR1220 √ √ × × AR1220 √ √ × √ AR1220 √ √ × × AR1220 VW √ √ × √ AR1220 √ √ × × AR2220 √ √ √ √ AR2240 √ √ √ √ Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 186 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Model&Version AR3260 8 List of Cards SIC WSIC XSIC voice card √ √ √ √ Matching between SRUs and software versions Table 8-2 Matching between SRUs and software versions Model&Version SRU WLAN Subcard ARV200R001 C00 AR1220 × × AR1220V × × AR2220 × × AR2240 √ × AR3260 √ × AR1220 × × AR1220V × × AR1220W × √ AR1220VW × √ AR2220 × × AR2240 √ × AR3260 √ × AR1220 × × AR1220V × × AR1220W × √ AR1220VW × √ AR1220L × × AR2220 × × AR2240 √ × AR3260 √ × ARV200R001 C01&ARV20 0R002C00 ARV200R002 C01 Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 187 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 8 List of Cards Matching between Ethernet LAN interface cards and software versions Table 8-3 Matching between Ethernet LAN interface cards and software versions Model&Version ARV200R001C0 ARV200R001C0 1&ARV200R002 C00 ARV200R002C0 Issue 03 (2012-04-20) 8FE1GE 24GE AR1220 × × AR1220V × × AR2220 √ √ AR2240 √ √ AR3260 √ √ AR1220 √ × AR1220V √ × AR1220W √ × AR1220VW √ × AR2220 √ √ AR2240 √ √ AR3260 √ √ AR1220 √ × AR1220V √ × AR1220W √ × AR1220VW √ × AR1220L √ × AR2220 √ √ AR2240 √ √ AR3260 √ √ Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 188 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 8 List of Cards Matching between WAN cards and software versions Table 8-4 Matching between WAN cards and software versions Model& Version 2F 1E1 T1M/ 2E1 T1M (SIC 2E1 T1M (WS IC) 1E1T 1-F/ 2E1T 1-F 1S 2S 1C S15 GH SP +7 -T -S AR V20 0R0 01C 00 R1 22 √ √ × × √ × × × × × × × × R1 22 0V √ √ × × √ × × × × × × × × R2 22 √ √ × × √ × × × × × × × × R2 24 √ √ × × √ × × × × × × × × R3 26 √ √ × × √ × × × × × × × × R1 22 √ √ × √ √ √ √ √ √ × × × × R1 22 0V √ √ × √ √ √ √ √ √ × × × × R1 22 √ √ × √ √ √ √ √ √ × × × × AR V20 0R0 01C 01 Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 189 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Model& Version AR V20 0R0 02C 00 Issue 03 (2012-04-20) 8 List of Cards 2F 1E1 T1M/ 2E1 T1M (SIC 2E1 T1M (WS IC) 1E1T 1-F/ 2E1T 1-F 1S 2S 1C S15 GH SP +7 -T -S R1 22 0V √ √ × √ √ √ √ √ √ × × × × R2 22 √ √ × √ √ √ √ √ √ √ × × × R2 24 √ √ × √ √ √ √ √ √ √ × × × R3 26 √ √ × √ √ √ √ √ √ √ × × × R1 22 √ √ √ √ √ √ √ √ √ × × × × R1 22 0V √ √ √ √ √ √ √ √ √ × × × × R1 22 √ √ √ √ √ √ √ √ √ × × × × R1 22 0V √ √ √ √ √ √ √ √ √ × × × × Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 190 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Model& Version AR V20 0R0 02C 01 Issue 03 (2012-04-20) 8 List of Cards 2F 1E1 T1M/ 2E1 T1M (SIC 2E1 T1M (WS IC) 1E1T 1-F/ 2E1T 1-F 1S 2S 1C S15 GH SP +7 -T -S R2 22 √ √ √ √ √ √ √ √ √ √ × × × R2 24 √ √ √ √ √ √ √ √ √ √ × × × R3 26 √ √ √ √ √ √ √ √ √ √ × × × R1 22 √ √ √ √ √ √ √ √ √ × √ √ √ R1 22 0V √ √ √ √ √ √ √ √ √ × √ √ √ R1 22 √ √ √ √ √ √ √ √ √ × √ √ √ R1 22 0V √ √ √ √ √ √ √ √ √ × √ √ √ R1 22 0L √ √ √ √ √ √ √ √ √ × √ √ √ R2 22 √ √ √ √ √ √ √ √ √ √ √ √ √ Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 191 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Model& Version 8 List of Cards 2F 1E1 T1M/ 2E1 T1M (SIC 2E1 T1M (WS IC) 1E1T 1-F/ 2E1T 1-F 1S 2S 1C S15 GH SP +7 -T -S R2 24 √ √ √ √ √ √ √ √ √ √ √ √ √ R3 26 √ √ √ √ √ √ √ √ √ √ √ √ √ Matching between voice cards and software versions Table 8-5 Matching between voice cards and software versions Model&Version 4FXS1FXO 2BST(SIC) 2BST(WSIC) 16/32/64/128 -Channel DSP Module ARV200 R001C00 AR122 × × × × AR122 0V √ × × × AR222 × × × × AR224 × × × × AR326 × × × × AR122 × × × × AR122 0V √ √ × × AR122 0W × × × × ARV200 R001C01 Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 192 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Model&Version ARV200 R002C00 ARV200 R002C01 Issue 03 (2012-04-20) 8 List of Cards 4FXS1FXO 2BST(SIC) 2BST(WSIC) 16/32/64/128 -Channel DSP Module AR122 0VW √ √ × × AR222 √ √ × √ AR224 √ √ × √ AR326 √ √ × √ AR122 × × × × AR122 0V √ √ √ × AR122 0W × × × × AR122 0VW √ √ √ × AR222 √ √ √ √ AR224 √ √ √ √ AR326 √ √ √ √ AR122 × × × × AR122 0V √ √ √ × AR122 0W × × × × AR122 0VW √ √ √ × AR122 0L × × × × AR222 √ √ √ √ AR224 √ √ √ √ Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 193 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Model&Version AR326 8 List of Cards 4FXS1FXO 2BST(SIC) 2BST(WSIC) 16/32/64/128 -Channel DSP Module √ √ √ √ Matching between xDSL/xPON cards and software versions Table 8-6 Matching between xDSL/xPON cards and software versions Model&Versio ADSLA/M ADSL-B 4G.SHDSL 1PON VDSL AR V20 0R0 01C 00 AR1220 √ √ √ × × AR1220 √ √ √ × × AR2220 √ √ √ × × AR2240 √ √ √ × × AR3260 √ √ √ × × AR1220 √ √ √ × × AR1220 √ √ √ × × AR1220 √ √ √ × × AR1220 VW √ √ √ × × AR2220 √ √ √ × × AR2240 √ √ √ × × AR3260 √ √ √ × × AR1220 √ √ √ √ × AR1220 √ √ √ √ × AR1220 √ √ √ √ × AR1220 VW √ √ √ √ × AR2220 √ √ √ √ × AR V20 0R0 01C 01 AR V20 0R0 02C 00 Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 194 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Model&Versio AR V20 0R0 02C 01 8 List of Cards ADSLA/M ADSL-B 4G.SHDSL 1PON VDSL AR2240 √ √ √ √ × AR3260 √ √ √ √ × AR1220 √ √ √ √ √ AR1220 √ √ √ √ √ AR1220 √ √ √ √ √ AR1220 VW √ √ √ √ √ AR1220 √ √ √ √ √ AR2220 √ √ √ √ √ AR2240 √ √ √ √ √ AR3260 √ √ √ √ √ 8.2 Power Consumption and Weight This section describes the power consumption and weight of cards supported by the AR routers. Table 8-7 describes the power consumption and weight of cards supported by the AR routers. The table describes the power consumption of the cards operating at 25°C (80°F). Table 8-7 Power consumption and weight of cards supported by the AR1200 Card Name Maximum Power Consumption Weight 8FE1GE 12.036 W 0.6 kg (1.33 lb) 1GEC 2.28 W 0.25 kg (0.55 lb) 2FE 3.01 W 0.3 kg (0.67 lb) 1E1T1-M/ 2E1T1-M 7W 0.3 kg (0.67 lb) 1E1T1-F/2E1T1F 7W 0.3 kg (0.67 lb) 1SA/2SA l 1SA: 10 W 0.3 kg (0.67 lb) l 2SA: 11.7 W 8AS Issue 03 (2012-04-20) 8.9 W 0.6 kg (1.33 lb) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 195 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 8 List of Cards Card Name Maximum Power Consumption Weight 1BST 12 W 0.3 kg (0.67 lb) 2BST 16.8 W 0.3 kg (0.67 lb) 4FXS1FXO 12.78 W 0.3 kg (0.67 lb) ADSL-A/M 5.4 W 0.3 kg (0.67 lb) 8.2 W 0.35 kg (0.77 lb) ADSL-B 4G.SHDSL Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 196 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 9 List of Interface Attributes List of Interface Attributes About This Chapter This section describes the interface attributes supported by the AR routers. 9.1 Electrical Interfaces This section describes the attributes of electrical interfaces. 9.2 GE/PON Optical Interface Attributes This section describes the attributes of GE/PON optical interfaces. 9.3 CPOS Interface Attributes This section describes the CPOS interface attributes. 9.4 E1 Interface Attributes This section describes the attributes of E1 interfaces. 9.5 T1 Interface Attributes This section describes the attributes of T1 interfaces. 9.6 Synchronous/Asynchronous Serial Interface Attributes This section describes the attributes of synchronous/asynchronous serial interfaces. 9.7 ISDN S/T Interface Attributes This section describes ISDN S/T interface attributes. 9.8 FXS/FXO Interface Attributes This section describes the attributes of FXS/FXO interfaces. 9.9 ADSL2/ADSL2+/G.SHDSL Interface Attributes This section describes the attributes of ADSL2/ADSL2+/G.SHDSL interfaces. 9.10 Attributes of the Console Interface This section describes the attributes of the console interface. 9.11 Attributes of the USB Interface This section describes the attributes of the USB interface. 9.12 3G Interface Attributes This section describes the attributes of 3G interfaces. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 197 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 9 List of Interface Attributes 9.13 VDSL Interface Attributes This section describes the attributes of the VDSL interface. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 198 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 9 List of Interface Attributes 9.1 Electrical Interfaces This section describes the attributes of electrical interfaces. Table 9-1 describes the attributes of 10BASE-TX/100BASE-TX electrical interfaces. Table 9-1 Attributes of 10BASE-TX/100BASE-TX electrical interfaces Item Description Connector type RJ45 Interface attribute MDI/MDIX NOTE l The interfaces of most network cards are medium dependent interfaces (MDIs). l MDIX interfaces are usually used on hubs or LAN switches. Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP Network layer protocol IP Table 9-2 describes the attributes of 1000BASE-T electrical interfaces. Table 9-2 Attributes of 1000BASE-T electrical interfaces Item Description Connector type RJ45 Interface attribute MDI/MDIX NOTE l The interfaces of most network cards are medium dependent interfaces (MDIs). l MDIX interfaces are usually used on hubs or LAN switches. Issue 03 (2012-04-20) Standards compliance IEEE802.3, IEEE802.3u, IEEE802.3ab Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP Network layer protocol IP Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 199 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 9 List of Interface Attributes 9.2 GE/PON Optical Interface Attributes This section describes the attributes of GE/PON optical interfaces. A GE optical interface can be connected to an optical module. Table 9-3 and Table 9-4 describe the attributes of optical interfaces and optical modules. Table 9-3 Attributes of the 100/1000BASE-X GE optical interface Attribute Description Connector type LC/PC Optical interface attribute Depending on the SFP optical module. Standards compliance IEEE 802.3ab Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP Network layer protocol IP Table 9-4 Attributes of the SFP optical module (100/1000 Mbit/s) supported by the GE optical interface Issue 03 (2012-04-20) Attri bute Description Tran smiss ion dista nce 500 m 10 km 10 km (singlemode bidirectional fiber) 40 km 40 km 80 km 100 km Cent er wave lengt 850 nm 1310 nm Tx: 1310 nm Tx: 1490 nm 1310 nm 1550 nm 1550 nm 1550 nm Rx: 1490 nm Rx: 1310 nm Tran smitt ing powe -9.5 dBm to -2.5 dBm -9.0 dBm to -3.0 dBm -9.0 dBm to -3.0 dBm -5.0 dBm to 0 dBm -5.0 dBm to 0 dBm -2.0 dBm to 5.0 dBm 0 dBm to 5 dBm -9.0 dBm to -3.0 dBm Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 200 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 9 List of Interface Attributes Attri bute Description Rece iver sensi tivity -17.0 dBm -20.0 dBm -19.5 dBm -19.5 dBm -23 dBm -22 dBm -23.0 dBm -30.0 dBm Over load optic al powe 0 dBm -3.0 dBm -3.0 dBm -3.0 dBm -3.0 dBm -3.0 dBm -3.0 dBm -9.0 dBm Extin ction ratio 9 dB 9 dB 6 dB 6 dB 9 dB 8.5 dB 9 dB 8 dB Fiber type Multimode Single-mode Table 9-5 Attributes of the SFP optical module supported by the PON optical interface Attribute Description Connector type SC/PC connector (SFP encapsulation) Transport mode Single-mode bidirectional Transmission rate l Downstream transmission rate of 2488 Mbit/s l Upstream transmission rate of 1244 Mbit/s Standards compliance ITU-T G.984.2 CLASS B+ ITU-T G.984.5 WBF Sending end Center wavelength 1290 nm to 1330 nm Average transmitting optical power 0.5 dBm to 5 dBm Average turn-off optical power -45 dBm Side-mode 30 dB suppression ratio Receivin g end Issue 03 (2012-04-20) Extinction ratio 10 dB to 15 dB Overload power -8 dBm Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 201 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Attribute 9 List of Interface Attributes Description Input wavelength range Operating temperature 1480 nm to 1500 nm 0°C to 70°C 9.3 CPOS Interface Attributes This section describes the CPOS interface attributes. A CPOS optical interface can be connected to an optical module. Table 9-6 and Table 9-7 describe the attributes of optical interfaces and optical modules. Table 9-6 CPOS interface attributes Attribute Description Connector type LC/PC Optical interface attribute Depending on the SFP optical module Standards compliance STM-1 Frame format SDH/SONET Network layer protocol IP Table 9-7 Attributes of the SFP optical module supported by the CPOS interface Issue 03 (2012-04-20) Attribute Description Transmissio n distance 2 km 15 km 40 km 80 km Center wavelength 1310 nm 1310 nm 1310 nm 1550 nm Transmittin g power -19.0 dBm to -14.0 dBm -15.0 dBm to 8.0 dBm -15.0 dBm to 8.0 dBm -3.0 dBm to 0 dBm Receiver sensitivity -28.0 dBm -23.0 dBm -23.0 dBm -32.98 dBm Overload optical power -14.0 dBm -10.17 dBm -8.0 dBm -8.0 dBm Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 202 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 9 List of Interface Attributes Attribute Description Extinction ratio >10.0 dB 58.86 dB Fiber type Multimode Single-mode 14.08 dB 43.09 dB 9.4 E1 Interface Attributes This section describes the attributes of E1 interfaces. Table 9-8 describes the attributes of channelized E1 interfaces. Table 9-8 Attributes of channelized E1 interfaces Attribute Description Connector type DB9 Standards compliance G.703 or G.704 Transmission rate 2.048 Mbit/s Cable type E1 75-ohm unbalanced coaxial cable E1 120-ohm balanced twisted pair cable E1 trunk cable extension Working mode CE1, ISDN PRI, or VE1 Function Backup Terminal access ISDN PRI Table 9-9 describes the attributes of unchannelized E1 interfaces. Table 9-9 Attributes of unchannelized E1 interfaces Attribute Description Connector type DB9 Standards compliance G.703 or G.704 Transmission rate 2.048 Mbit/s Cable type E1 75-ohm unbalanced coaxial cable E1 120-ohm balanced twisted pair cable E1 trunk cable extension Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 203 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description Attribute Description Working mode Unchannelized E1 Function Backup 9 List of Interface Attributes Terminal access 9.5 T1 Interface Attributes This section describes the attributes of T1 interfaces. Table 9-10 describes the attributes of channelized T1 interfaces. Table 9-10 Attributes of channelized T1 interfaces Attribute Description Connector type DB9 Standards compliance G.703 or G.704 Transmission rate 1.544 Mbit/s Cable type T1 100-ohm coaxial cable Working mode CT1, ISDN PRI, or VT1 Function Backup Terminal access ISDN PRI Table 9-11 describes the attributes of unchannelized T1 interfaces. Table 9-11 Attributes of unchannelized T1 interfaces Attribute Description Connector type DB9 Standards compliance G.703 or G.704 Transmission rate 1.544 Mbit/s Cable type T1 100-ohm coaxial cable Working mode Unchannelized T1 Function Backup Terminal access Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 204 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 9 List of Interface Attributes 9.6 Synchronous/Asynchronous Serial Interface Attributes This section describes the attributes of synchronous/asynchronous serial interfaces. Table 9-12 describes the attributes of synchronous/asynchronous serial interfaces. Table 9-12 Attributes of synchronous/asynchronous serial interfaces Attribute Description Synchronous Serial Interface Connector type DB28 Standards compliance and working mode l V.24 DTE l V.35 DTE l V.24 DCE l V.35 DCE Asynchronous Serial Interface RS232 l X.21 DTE l RS449 DTE l RS449 DCE l RS530 DTE l RS530 DCE Minimum baud rate (bit/ s) 1200 1200 600 Maximum baud rate (bit/ s) 64 k 2.048 M 115.2 k Cable type l V.24 DTE cable l V.24 DCE cable l V.35 DTE cable l V.35 DCE cable l X.21 DTE cable l RS449 DTE cable l RS449 DCE cable l RS530 DTE cable l RS530 DCE cable Function DDN leased line l Modem dial-up l Backup Terminal access l Asynchronous leased line l Terminal access Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 205 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 9 List of Interface Attributes Table 9-13 describes the attributes of asynchronous serial interfaces. Table 9-13 Attributes of asynchronous serial interfaces Attribute Description Connector type RJ45 Standards compliance and working mode RS232 Minimum baud rate (bit/s) 300 Maximum baud rate (bit/s) 115.2 k Cable type Customized RJ45 cable Function l Modem dial-up l Backup l Asynchronous leased line l Terminal access 9.7 ISDN S/T Interface Attributes This section describes ISDN S/T interface attributes. Table 9-14 lists ISDN S/T interface attributes. Table 9-14 ISDN S/T interface attributes Item Description Connector RJ45 Standards compliance ITU-T I.430, Q.921, Q.931 Rate 192 kbit/s Bandwidth 0 to 100 MHz Cable l TE: standard ISDN S/T interface cables (straightthrough cables) l NT: ISDN S/T interface crossover cables 9.8 FXS/FXO Interface Attributes This section describes the attributes of FXS/FXO interfaces. Table 9-15 describes the attributes of FXS/FXO (RJ11) interfaces on the 4FXS1FXO. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 206 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 9 List of Interface Attributes Table 9-15 Attributes of FXS/FXO (RJ11) interfaces Attribute Description Connector type RJ11 Standards compliance ITU Q.512 for FXS interfaces ITU Q.552 for FXO interfaces ITU K.20 for protection against overcurrent and overvoltage Cable type Regular telephone line Dialing mode DTMF in accordance with GB3378 Pulse dialing Bandwidth 300 Hz to 3400 Hz Table 9-16 describes the attributes of FXS (DB68) interfaces on the 32FXS/16FXS. Table 9-16 Attributes of FXS (DB68) interfaces Attribute Description Connector type DB68 Standards compliance IEEE 1284C Interface as a 36 contact connector Cable type Twisted pair Dialing mode DTMF in accordance with GB3378 Pulse dialing Bandwidth 300 Hz to 3400 Hz Table 9-17 describes the attributes of FXO (RJ11) interfaces on the 4FXO. Table 9-17 Attributes of FXO (RJ11) interfaces Attribute Description Connector type RJ11 Standards compliance ITU Q.552 for FXO interfaces ITU K.20 for protection against overcurrent and overvoltage Cable type Telephone cable Dialing mode DTMF in accordance with GB3378 Pulse dialing Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 207 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 9 List of Interface Attributes Attribute Description Bandwidth 300 Hz to 3400 Hz 9.9 ADSL2/ADSL2+/G.SHDSL Interface Attributes This section describes the attributes of ADSL2/ADSL2+/G.SHDSL interfaces. Table 9-18 describes the attributes of ADSL2/ADSL2+ interfaces. Table 9-18 Attributes of ADSL2/ADSL2+ interfaces Attribute Description Connector type RJ11 Standards compliance ADSL-A/M: ITU-T 992.1 G.DMT ITU-T 992.3 ITU-T 992.5 ADSL-B: ITU-T 992.1 G.DMT ANSI T1.413 Issue 2 ITU-T 992.3 ITU-T 992.5 Transmission rate ADSL-A/M: l ADSL full rate mode (ITU-T 992.1 G.DMT): a downstream transmission rate of 8 Mbit/s and an upstream transmission rate of 1024 kbit/s l ADSL2 full rate mode (ITU-T 992.3): a downstream transmission rate of 12 Mbit/s and an upstream transmission rate of 1024 kbit/s l ADSL2+ full rate mode (ITU-T 992.5): a downstream transmission rate of 24 Mbit/s and an upstream transmission rate of 1024 kbit/s ADSL-B: A downstream transmission rate of 8 Mbit/s and an upstream transmission rate of 1024 kbit/s Cable type Regular telephone line Table 9-19 describes the attributes of G.SHDSL interfaces. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 208 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 9 List of Interface Attributes Table 9-19 Attributes of G.SHDSL interfaces Attribute Description Connector type One RJ45 connector on one end and four RJ11 connectors on the other end Standards compliance G.SHDSL.bit Transmission rate 5.696 Mbit/s per pair 9.10 Attributes of the Console Interface This section describes the attributes of the console interface. Table 9-20 lists the attributes of the console interface. Table 9-20 Attributes of the console interface Item Description Connector type RJ45 Standards compliance RS232 Operating mode Full duplex Universal Asynchronous Receiver/ Transmitter (UART) Data equipment type Data Circuit-terminating Equipment (DCE) Table 9-21 lists the attributes of the MiniUSB-B interface. Table 9-21 Attributes of the MiniUSB-B interface Item Description Connector type MiniUSB-B, angle Standards compliance USB1.0 Operating mode Device 9.11 Attributes of the USB Interface This section describes the attributes of the USB interface. Table 9-22 lists the attributes of the USB-A interface. Issue 03 (2012-04-20) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 209 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 9 List of Interface Attributes Table 9-22 Attributes of the USB-A interface Item Description Connector type USB-A Standards compliance USB2.0, compatible with USB1.0 and USB1.1 Operating mode Host 9.12 3G Interface Attributes This section describes the attributes of 3G interfaces. Table 9-23 lists the attributes of 3G interfaces. Table 9-23 3G interface attributes Item Description Connector SMA RF: connects to an antenna to provide wireless access. mini USB: connects to a USB flash drive with third-party wireless network test software, for example, Qualcomm CAIT. Standards compliance and frequency bands supported GSM/GPRS/EDGE: 850/900/1800/1900 (MHz) Rate GSM CS: HSPA+/HSUPA/HSDPA/WCDMA: 2100/1900/900/850 (MHz) l Upstream (Tx): 9.6kbit/s l Downstream (Rx): 9.6kbit/s GPRS/EDGE: Multi-slot Class 12, Class B WCDMA CS: l Upstream (Tx): 64 kbit/s l Downstream (Rx): 64 kbit/s WCDMA PS: l Upstream (Tx): 384 kbit/s l Downstream (Rx): 384 kbit/s HSPA: l Upstream (Tx): 5.76 Mbit/s l Downstream (Rx): 14.4 Mbit/s HSPA+: l Upstream (Tx): 5.76 Mbit/s l Downstream (Rx): 21 Mbit/s Network protocol Issue 03 (2012-04-20) WCDMA/HSPA/GPRS/EDGE Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 210 Huawei AR1200&2200&3200 Series Enterprise Routers Hardware Description 9 List of Interface Attributes 9.13 VDSL Interface Attributes This section describes the attributes of the VDSL interface. Table 9-24 lists attributes of the VDSL interface. Table 9-24 VDSL interface attributes Item Description Connector RJ11 Standards compliance VDSL standards: ITU-T 993.2 ITU-T 992.5 ITU-T 992.3 ITU-T 992.1 G.DMT Rate l ADSL2+ full rate mode (ITU-T 992.3): a downstream transmission rate of 12 Mbit/s and an upstream transmission rate of 1 Mbit/s l VDSL2 mode (ITU-T 993.2): a downstream transmission rate of 100 Mbit/s and an upstream transmission rate of 50 kbit/s l ADSL2 full rate mode (ITU-T 992.5): a downstream transmission rate of 24 Mbit/s and an upstream transmission rate of 1 Mbit/s l ADSL full rate mode (ITU-T 992.1 G.DMT): a downstream transmission rate of 8 Mbit/s and an upstream transmission rate of 1 Mbit/s Cable type Issue 03 (2012-04-20) Telephone cable Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd. 211
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Page Mode : UseOutlines XMP Toolkit : 3.1-701 Create Date : 2012:04:27 00:41:47+08:00 Creator Tool : XSL Formatter V4.1 R1 (4,1,2006,1206) for Windows Modify Date : 2012:04:27 14:59:19+08:00 Metadata Date : 2012:04:27 14:59:19+08:00 Format : application/pdf Description : Hardware Description Creator : Huawei Technologies Co., Ltd. Title : Hardware Description Producer : Antenna House PDF Output Library 2.4.0 (Windows) Trapped : False Document ID : uuid:095a8b7d-f42c-4643-821e-dbb70fcb4bb9 Instance ID : uuid:0ccc83a9-f285-49d1-a9b4-65f3dd794f4a Has XFA : No Page Count : 218 Subject : Hardware Description Author : Huawei Technologies Co., Ltd.EXIF Metadata provided by EXIF.tools