Huawei Technologies B5338-168 LTE Indoor CPE User Manual Quick Start Guide

Huawei Technologies Co.,Ltd LTE Indoor CPE Quick Start Guide

User Manual

        LTE CPE B5338-168 V100R001C00 Quick Start Guide   Issue 01 Date 2016-10-14 HUAWEI TECHNOLOGIES CO., LTD.
 Issue 01 (2016-08-164) Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd. i    Copyright © Huawei Technologies Co., Ltd. 2016. All rights reserved. No  part  of  this  document  may  be  reproduced  or  transmitted  in  any  form  or  by  any  means  without  prior  written consent of Huawei Technologies Co., Ltd.  Trademarks and Permissions   and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.  Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document  are  provided  "AS  IS"  without  warranties,  guarantees  or  representations  of  any  kind,  either  express  or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied.     Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com
LTE CPE B2338-168 Quick Start Guide About This Document  Issue 01 (2016-08-16) Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd. ii  About This Document Change History Changes between document issues are cumulative.   The latest document issue contains all the changes made in earlier issues. Issue 01 (2017-01-20) This issue is the first release.
LTE CPE B2338-168 Quick Start Guide Contents  Issue 01 (2016-08-16) Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd. iii  Contents About This Document ....................................................................................................................... ii Contents ............................................................................................................................................ iii 1 What You Need ................................................................................................................................ 1 2 IDU Panel ......................................................................................................................................... 2 3 Installation ....................................................................................................................................... 6 4 Connect to the Internet ................................................................................................................... 8 5 Europe - EU Declaration of Conformity ..................................................................................... 13 6 Federal Communication Commission Interference Statement ................................................. 16
LTE CPE B2338-168 Quick Start Guide 1 What You Need  Issue 01 (2016-08-16) Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd. 1  1 What You Need LTE IDU Device Quick Start Guide Power Adapter    One RJ-45 cable for connecting IDU and computer TDD antenna*4
LTE CPE B2338-168 Quick Start Guide 2 IDU Panel  Issue 01 (2016-08-16) Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd. 2  2 IDU Panel 2.1 IDU Front Panel .   IDU LED Indicators as following: ALL LEDs           LED name Power 2.4G W 5G W VoIP1 VoIP2 SINR_1   SIM_issue SINR_2 SINR_3 SINR_4 SINR_5 LED list ● ● ● ● ● ● ● ● ● ● ●
LTE CPE B2338-168 Quick Start Guide 2 IDU Panel  Issue 01 (2016-08-16) Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd. 3  LED   Color LED Behavior Status Indication 10 LEDs List   Left to Right from Front  Power Status     Blue Steady ON Device On ( AC plug in ) Blue OFF Device  Off  (  AC  not  plug  in  or device damaged ) Wi-Fi_2.4G   Blue Steady ON 2.4GHz Wi-Fi On Blue Blanking 2.4GHz Data   Blue OFF 2.4GHz Wi-Fi Off Wi-Fi_5G  Blue Steady ON 5GHz Wi-Fi On Blue Blanking 5GHz Data   Blue OFF 5GHz Wi-Fi Off VoIP_1  Blue Steady ON SIP register   Blue Blanking busy Blue OFF SIP not register VoIP_2  Blue Steady ON SIP register   Blue Blanking busy Blue OFF SIP not register Signal Strength / SIM    Blue Steady ON SINR < 0dB Blue Chasing light Searching Blue Blanking Registering Blue OFF No Signal Orange Red Steady ON SIM issue; no sim / sim broken   Orange Red Blinking PUK / PIN Code
LTE CPE B2338-168 Quick Start Guide 2 IDU Panel  Issue 01 (2016-08-16) Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd. 4  Orange Red OFF SIM  is  detected  and  working properly LTE Status LED : SINR Status  When CPE connect to BS, the 5 LED became Signal Quality indication according to SINR or other pre-defined quality indicator LTE 1+2+3+4+5  Blue Steady ON SINR < 0dB  Blue Steady ON 0dB   < SINR   < 4dB  Blue Steady ON 4dB   < SINR   < 9dB  Blue Steady ON 9dB   < SINR   < 16dB  Blue Steady ON 16dB   < SINR
LTE CPE B2338-168 Quick Start Guide 2 IDU Panel  Issue 01 (2016-08-16) Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd. 5  2.2 IDU Rear Panel   1. Power switch: Power on or Power Off. 2. Power Adapter Socket(DC-12V):Plug adapter DC pin into this socket 3. WPS Button: Prfunction. 4. evice. Or press and hold the Reset button 10 seconds to set router to factory default settings. LED name Color LED Behavior Status Indication Reset Blue Blinking Except for Power LED is always on  5. LAN Port (RJ45): Port for connecting PC, hub and switch or other network equipment by RJ-45 Ethernet cable. 6. Telephone Port(RJ-11):Connector your telephone to Indoor CPE with a RJ-11 telephone cable 7. SIM card Slot Cover: Open the cover and insert SIM card into the slot with right direction.
LTE CPE B2338-168 Quick Start Guide 3 Installation  Issue 01 (2016-08-16) Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd. 6  3 Installation Before installing the IDU, please verify that you have all the items listed in 1 What You Need. If any of the items is missing or damaged, please contact your LTE service provider.    1. Connector the device LAN port to your PC with a RJ-45 Ethernet cable which is supplied.
LTE CPE B2338-168 Quick Start Guide 3 Installation  Issue 01 (2016-08-16) Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd. 7  2. Insert SIM card into device with right direction. 3. -12V Power Jack: and insert the plug into power outlet 4. Switch ON the power. The device will start the booting process. After a few seconds, the LED lights will start blinking
LTE CPE B2338-168 Quick Start Guide 4 Connect to the Internet  Issue 01 (2016-08-16) Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd. 8  4 Connect to the Internet 4.1. Login in the web GUI. Step 1 Make sure the physical connection is OK Step 2 PC will get default IP 192.168.1.x (x: 2-254). Open a web browser and go to https://192.168.1.1. If your web browser is IE8.0/IE9.0, or 10.0, please from the IE->   Step 3 Enter the default Username (user) and Password (Enduser), and then click Login.
LTE CPE B2338-168 Quick Start Guide 4 Connect to the Internet  Issue 01 (2016-08-16) Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd. 9    For your internet security, we recommend you to change the default Wi-Fi password while the first time log-in. Please go Management>Setup Wizard or   Wi-Fi > Basic to change the Wi-Fi password. Try to enter a new password, retype it to confirm, and click Apply. Alternatively click Undo to proceed to the main menu if you do not want to change the password. 4.2. Operation in the web GUI. 1. Chang Password  2. Status Page
LTE CPE B2338-168 Quick Start Guide 4 Connect to the Internet  Issue 01 (2016-08-16) Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd. 10   3. Setting for APN If the LTE SIGNAL STRENGTH light keeps BLINKING, which means the LTE connection is fail, please try to manually configure the Internet connection. Click Management > Modem Setup. If the APN (Access Point Name) is not the same as what you were given, click the Manual icon, after revising the APN what you want, apply it.  4. Setting for PIN If a PIN code is required, click Personalization > PIN Management > USIM's PIN/PUK Verification. Enter it and then click Verify.
LTE CPE B2338-168 Quick Start Guide 4 Connect to the Internet  Issue 01 (2016-08-16) Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd. 11   After LTE SIGNAL STRENGTH is steady on, you can start to browse the website. For more information, go to Status > Help page to check the details. 4.3. WIFI Setting. 1. Turn the Wireless On or Off. You can go to Wi-Fi > Basic in the Web GUI, select Enable Wi-Fi, and configure wireless settings and then click Apply. Go to Status > Help page for more information.  2. Activate WPS You can set up a wireless network with WPS (WiFi Protected Setup) or manually add a client to your wireless network. Activating WPS helps you quickly set up a wireless network with strong security. Using the physical WPS button: b) Make sure the Power LED is on (not blinking). c) Press the WPS button more than one second and release it. The WPS LED would flash while the LTE Device sets up a WPS connection with the wireless device.
LTE CPE B2338-168 Quick Start Guide 4 Connect to the Internet  Issue 01 (2016-08-16) Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd. 12  Using the WPS Button in the Web Configuration: a) Click WiFi > WPS b) Choose the PBC or PIN and click Start.
LTE CPE B2338-168 Quick Start Guide 5 Europe - EU Declaration of Conformity  Issue 01 (2016-08-16) Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd. 13  5 Europe - EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC.  EN 301 908-1 V7.1.1  EN 301 908-13 V6.2.1  EN 300 328 V1.9.1  EN 301 893 V1.8.1  EN 62311:2008, EN50385:2002  EN 301 489-1 V1.9.2  EN 301 489-17 V2.2.1  EN 301 489-24 V1.5.1  EN 55032: 2012/AC:2013  EN 55024:2010  EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013  The minimum distance between the user and/or any bystander and the radiating structure of the transmitter is 20 cm.  In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. 0560   [Jméno výrobce] [typ zařízení] 
LTE CPE B2338-168 Quick Start Guide 5 Europe - EU Declaration of Conformity  Issue 01 (2016-08-16) Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd. 14  Dansk [Danish] Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr [udstyrets typebetegnelse] overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. Deutsch [German] Hiermit erklärt [Name des Herstellers], dass sich das Gerät [Gerätetyp] in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet. Eesti [Estonian] Käesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tüüp = type of equipment] vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. English Hereby, [Gemtek], declares that this [WiMAX/LTE CPE] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Español [Spanish] Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. [Greek]  [name of manufacturer]  [type of equipment]  Français [French] Par la présente [nom du fabricant] déclare que l'appareil [type d'appareil] est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Italiano [Italian] Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio] è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski [Latvian] [name of manufacturer / izgatavotāja nosaukums] [type of equipment / iekārtas tips]   [Lithuanian]   [manufacturer name] [equipment type] atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Nederlands [Dutch] Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Malti [Maltese] Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-hemm fid-Dirrettiva 1999/5/EC. Magyar Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó
LTE CPE B2338-168 Quick Start Guide 5 Europe - EU Declaration of Conformity  Issue 01 (2016-08-16) Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd. 15  [Hungarian] alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. Polski [Polish] Niniejszym [nazwa producenta] [nazwa wyrobu] jest zgodny z Dyrektywy 1999/5/EC. Português [Portuguese] [Nome do fabricante] declara que este [tipo de equipamento] está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE. Slovensko [Slovenian] [Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami i direktive 1999/5/ES. Slovensky [Slovak] [Meno výrobcu] [typ zariadenia]  Suomi [Finnish] [Valmistaja = manufacturer] vakuuttaa täten että [type of equipment = laitteen tyyppimerkintä] tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
LTE CPE B2338-168 Quick Start Guide 6 Federal Communication Commission Interference Statement  Issue 01 (2016-08-16) Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd. 16   6 Federal  Communication  Commission  Interference  Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.    These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.   However, there is no guarantee that interference will not occur in a particular installation.    If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: -  Reorient or relocate the receiving antenna. -  Increase the separation between the equipment and receiver. -  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -  Consult the dealer or an experienced radio/TV technician for help.  FCC  Caution:  Any  changes  or  modifications  not  expressly  approved  by  the  party  responsible  for  compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This  equipment  complies  with  FCC  radiation  exposure  limits  set  forth  for  an  uncontrolled  environment.  This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.
LTE CPE B2338-168 Quick Start Guide 6 Federal Communication Commission Interference Statement  Issue 01 (2016-08-16) Huawei Proprietary and Confidential         Copyright © Huawei Technologies Co., Ltd. 17

Navigation menu