Huawei Technologies BAC-LX3 Smart Phone User Manual cover en

Huawei Technologies Co.,Ltd Smart Phone cover en

Users Manual

Quick Start Guide
P10
1
Your device at a glance
Before you start, let's take a look at your new device.
To power on your device, press and hold the power
button until the screen turns on.
To power off your device, press and hold the power
button, and then touch .
To force your device to restart, press and hold the
power button until your device vibrates.
;9()VUXZ
+GXVOKIK
2OMNZYKTYUX
6U]KXH[ZZUT
,XUTZIGSKXG
9VKGQKX
9ZGZ[YOTJOIGZUX
*[GRRKTY
IGSKXG
,RGYN
,OTMKXVXOTZ
YIGTTKX
.KGJYKZPGIQ
<UR[SKH[ZZUT
3OIXUVNUTK
3OIXUVNUTK
2
Getting Started
Follow the instructions in the following figures to set up
your device.
• Do not insert or remove the SIM card when your
device is powered on.
• Ensure that the card is correctly aligned and that
the card tray is level when you insert it into your
device.
Be careful not to scratch your device or hurt yourself
when using the eject pin. Store the eject pin out of
NJDSP4%
BAC-L03
NJDSP4%
Or
BAC-L23
3
the reach of children to prevent accidental
swallowing or injury.
Caution
Do not use cut or modified SIM or microSD cards
with your device as these may not be recognized and
could damage the card tray.
4
Dual card dual standby single
pass
This description should only be used in conjunction
with the BAC-L23.
Your device supports only dual card dual standby single
pass, which means you cannot use both SIM cards for
calls or data services simultaneously.
When you are on a call using SIM card 1, SIM card 2
cannot be used to make or answer calls. If someone
calls SIM card 2, the caller will hear a voice message
similar to "The subscriber you dialed is out of the
service area" or "The subscriber you dialed cannot be
connected for the moment, please try again later."
The actual message will vary by service provider.
When you are using SIM card 1's data service, SIM
card 2's data service will be disabled.
Your device's single pass feature helps reduce power
consumption and increase your device's standby time. It
is not related to your service provider's network
conditions.
It may be a good idea to contact your service provider
and subscribe to missed call reminder and related
assistance services to avoid the conflicts mentioned
above.
5
For more information
If you encounter any problems while using your device,
you can obtain help from the following resources:
Log on to the official Huawei website. You can:
Visit http://consumer.huawei.com/en/ to download
user guides, view frequently asked questions and
other information.
Visit http://consumer.huawei.com/en/support/
hotline for the most up-to-date contact information
for your country or region.
Go to
Settings
and touch
About phone
>
Legal
information
to view legal information for your product.
Go to
Settings
and touch
About phone
>
Legal
information
>
Safety information
to view safety
information for your product.
Go to
Settings
and touch
About phone
>
Authentication info
to view regulatory information for
your product.
Go to
Settings
and touch
About phone
>
Certification logos
to view more information on
certification logos for your product.
All pictures and illustrations in this guide, including
but not limited to the product color, size, and display
content, are for your reference only. The actual
product may vary. Nothing in this guide constitutes a
warranty of any kind, express or implied.
6
Safety Information
Please read all of the safety information carefully before
using your device to ensure its safe and proper operation
and to learn how to dispose of your device properly.
Operation and safety
To prevent possible hearing damage, do
not listen at high volume levels for long periods.
Using an unapproved or incompatible power
adapter, charger, or battery may damage your
device, shorten its lifespan, or cause a fire, explosion,
or other hazards.
Ideal operating temperatures are 0 °C to 35 °C. Ideal
storage temperatures are -20 °C to +45 °C.
Pacemaker manufacturers recommend that a
minimum distance of 15 cm be maintained between
a device and a pacemaker to prevent potential
interference with the pacemaker. If using a
pacemaker, hold the device on the side opposite the
pacemaker and do not carry the device in your front
pocket.
Keep the device and the battery away from excessive
heat and direct sunlight. Do not place them on or in
heating devices, such as microwave ovens, stoves, or
radiators.
7
Observe local laws and regulations while using the
device. To reduce the risk of accidents, do not use
your wireless device while driving.
While flying in an aircraft or immediately before
boarding, only use your device according to
instructions provided. Use of a wireless device in an
aircraft may disrupt wireless networks, present a
hazard to aircraft operation, or be illegal.
To prevent damage to your device's parts or internal
circuits, do not use it in dusty, smoky, damp, or dirty
environments or near magnetic fields.
When charging the device, make sure the power
adapter is plugged into a socket near the devices and
is easily accessible.
Unplug the charger from electrical outlets and the
device when not in use.
Do not use, store or transport the device where
flammables or explosives are stored (in a gas station,
oil depot, or chemical plant, for example). Using your
device in these environments increases the risk of
explosion or fire.
Dispose of this device, the battery, and accessories
according to local regulations. They should not be
disposed of in normal household waste. Improper
battery use may lead to fire, explosion, or other
hazards.
8
Disposal and recycling information
The crossed-out wheeled-bin symbol on your product,
battery, literature or packaging reminds you that all
electronic products and batteries must be taken to
separate waste collection points at the end of their
working lives; they must not be disposed of in the normal
waste stream with household garbage. It is the
responsibility of the user to dispose of the equipment
using a designated collection point or service for
separate recycling of waste electrical and electronic
equipment (WEEE) and batteries according to local laws.
Proper collection and recycling of your equipment helps
ensure electrical and electronic equipment (EEE) waste is
recycled in a manner that conserves valuable materials
and protects human health and the environment,
improper handling, accidental breakage, damage, and/or
improper recycling at the end of its life may be harmful
for health and environment. For more information about
where and how to drop off your EEE waste, please
contact your local authorities, retailer or household
waste disposal service or visit the website
http://consumer.huawei.com/en/.
Reduction of hazardous substances
This device and any electrical accessories are compliant
with local applicable rules on the restriction of the use of
9
certain hazardous substances in electrical and electronic
equipment, such as EU REACH, RoHS and Batteries
(where included) regulations, etc. For declarations of
conformity about REACH and RoHS, please visit our web
site http://consumer.huawei.com/certification.
FCC Regulatory Compliance
Body worn operation
The device complies with RF specifications when used
near your ear or at a distance of 1.50 cm from your
body. Ensure that the device accessories, such as a
device case and device holster, are not composed of
metal components. Keep the device away from your
body to meet the distance requirement.
Certification information (SAR)
This device is also designed to meet the requirements for
exposure to radio waves established by the Federal
Communications Commission (USA).
The SAR limit adopted by the USA is 1.6 W/kg averaged
over one gram of tissue. The highest SAR value reported
to the FCC for this device type complies with this limit.
The highest SAR value reported to the FCC for this device
type when using at the ear is 1.30 W/kg, and when
properly worn on the body is 0.79 W/kg, and when using
the Wi-Fi hotspot function is 1.30 W/kg.
FCC statement
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
10
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and
receiver.
--Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Caution:
Any changes or modifications to this device not
expressly approved by Huawei Technologies Co., Ltd. for
compliance could void the user's authority to operate the
equipment.
11
Legal Notice
Trademarks and Permissions
, , and are trademarks or
registered trademarks of Huawei Technologies Co., Ltd.
Android™ is a trademark of Google Inc.
LTE is a trademark of ETSI.
The
Bluetooth
®
word mark and logos are registered
trademarks owned by
Bluetooth SIG, Inc.
and any use of
such marks by Huawei Technologies Co., Ltd. is under
license.
Wi-Fi
®
, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are
trademarks of Wi-Fi Alliance.
Privacy Policy
To better understand how we protect your personal
information, please see the privacy policy at
http://consumer.huawei.com/privacy-policy.
Copyright © Huawei Technologies Co., Ltd.
2017. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY,
AND DOES NOT CONSTITUTE ANY KIND OF
WARRANTIES.
底边留5mm
Note: Remember the Google account your phone
last logged in to.
During an untrusted factory settings restoration or
microSD card–based update, Google's anti-theft
mechanism requires you to enter the Google account
your phone last logged in to on the startup
navigation screen for identity authentication. Your
phone can properly power on only after the identity
authentication passes.
Model:
BAC-L03,BAC-L23
31508802_01
Please visit
http://consumer.huawei.com/en/support/hotline for
recent updated hotline and email address in your
country or region.

Navigation menu