Huawei Technologies BAC-LX3 Smart Phone User Manual cover en
Huawei Technologies Co.,Ltd Smart Phone cover en
Users Manual
P10 Quick Start Guide Your device at a glance Before you start, let's take a look at your new device. • To power on your device, press and hold the power button until the screen turns on. • To power off your device, press and hold the power button, and then touch *[GRRKTY IGSKXG 3OIXUVNUTK +GXVOKIK 9ZGZ[YOTJOIGZUX ,RGYN ,OTMKXVXOTZ YIGTTKXLegal information to view legal information for your product. Go to Settings and touch About phone > Legal information > Safety information to view safety information for your product. Go to Settings and touch About phone > Authentication info to view regulatory information for your product. Go to Settings and touch About phone > Certification logos to view more information on certification logos for your product. All pictures and illustrations in this guide, including but not limited to the product color, size, and display content, are for your reference only. The actual product may vary. Nothing in this guide constitutes a warranty of any kind, express or implied. Safety Information Please read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly. Operation and safety • To prevent possible hearing damage, do not listen at high volume levels for long periods. • Using an unapproved or incompatible power adapter, charger, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards. • Ideal operating temperatures are 0 °C to 35 °C. Ideal storage temperatures are -20 °C to +45 °C. • Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket. • Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators. • Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving. • While flying in an aircraft or immediately before boarding, only use your device according to instructions provided. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal. • To prevent damage to your device's parts or internal circuits, do not use it in dusty, smoky, damp, or dirty environments or near magnetic fields. • When charging the device, make sure the power adapter is plugged into a socket near the devices and is easily accessible. • Unplug the charger from electrical outlets and the device when not in use. • Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. • Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards. Disposal and recycling information The crossed-out wheeled-bin symbol on your product, battery, literature or packaging reminds you that all electronic products and batteries must be taken to separate waste collection points at the end of their working lives; they must not be disposed of in the normal waste stream with household garbage. It is the responsibility of the user to dispose of the equipment using a designated collection point or service for separate recycling of waste electrical and electronic equipment (WEEE) and batteries according to local laws. Proper collection and recycling of your equipment helps ensure electrical and electronic equipment (EEE) waste is recycled in a manner that conserves valuable materials and protects human health and the environment, improper handling, accidental breakage, damage, and/or improper recycling at the end of its life may be harmful for health and environment. For more information about where and how to drop off your EEE waste, please contact your local authorities, retailer or household waste disposal service or visit the website http://consumer.huawei.com/en/. Reduction of hazardous substances This device and any electrical accessories are compliant with local applicable rules on the restriction of the use of certain hazardous substances in electrical and electronic equipment, such as EU REACH, RoHS and Batteries (where included) regulations, etc. For declarations of conformity about REACH and RoHS, please visit our web site http://consumer.huawei.com/certification. FCC Regulatory Compliance Body worn operation The device complies with RF specifications when used near your ear or at a distance of 1.50 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement. Certification information (SAR) This device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). The SAR limit adopted by the USA is 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported to the FCC for this device type complies with this limit. The highest SAR value reported to the FCC for this device type when using at the ear is 1.30 W/kg, and when properly worn on the body is 0.79 W/kg, and when using the Wi-Fi hotspot function is 1.30 W/kg. FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications to this device not expressly approved by Huawei Technologies Co., Ltd. for compliance could void the user's authority to operate the equipment. 10 Legal Notice Trademarks and Permissions , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Android™ is a trademark of Google Inc. LTE is a trademark of ETSI. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Huawei Technologies Co., Ltd. is under license. Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance. Privacy Policy To better understand how we protect your personal information, please see the privacy policy at http://consumer.huawei.com/privacy-policy. Copyright © Huawei Technologies Co., Ltd. 2017. All rights reserved. THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY KIND OF WARRANTIES. 11 Note: Remember the Google account your phone last logged in to. During an untrusted factory settings restoration or microSD card–based update, Google's anti-theft mechanism requires you to enter the Google account your phone last logged in to on the startup navigation screen for identity authentication. Your phone can properly power on only after the identity authentication passes. Please visit http://consumer.huawei.com/en/support/hotline for recent updated hotline and email address in your country or region. Model: BAC-L03,BAC-L23 31508802_01
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Modify Date : 2017:07:05 10:33:38+08:00 Create Date : 2017:01:09 13:55:35+08:00 Metadata Date : 2017:07:05 10:33:38+08:00 Creator Tool : Adobe Illustrator CC 2015 (Windows) Thumbnail Width : 136 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 6695 bytes, use -b option to extract) Format : application/pdf Title : cover_en Document ID : xmp.did:f48d410e-0d0e-f743-a94c-12e95673406b Instance ID : uuid:6bdc55dd-af0b-48ea-b103-517b91162e87 Original Document ID : uuid:566502f1-ad36-4220-9f05-ea517428a51f Rendition Class : proof:pdf Derived From Instance ID : uuid:3bb578cd-d833-458b-bd22-4637b835ac3f Derived From Document ID : xmp.did:B04420ED817DE61198F1B206F7DBAD1A Derived From Original Document ID: uuid:566502f1-ad36-4220-9f05-ea517428a51f Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:63FE3C357773E611AD1CB85632BBAFC7, xmp.iid:f48d410e-0d0e-f743-a94c-12e95673406b History When : 2016:09:07 08:33:17+08:00, 2017:01:09 13:55:31+08:00 History Software Agent : Adobe Illustrator CS5.1, Adobe Illustrator CC 2015 (Windows) History Changed : /, / Producer : Adobe PDF library 15.00 N Pages : 1 Has Visible Transparency : True Has Visible Overprint : False Max Page Size W : 64.999306 Max Page Size H : 124.999778 Max Page Size Unit : Millimeters Font Name : FrutigerNextCom-Regular, AdobeSongStd-Light Font Family : Frutiger Next Com, Adobe 宋体 Std Font Face : Regular, L Font Type : Open Type, Open Type Font Version : Version 1.01, Version 5.010;PS 5.002;hotconv 1.0.57;makeotf.lib2.0.21895 Font Composite : False, False Font File Name : Frutiger Next Com Regular_0.ttf, AdobeSongStd-Light.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Group Name : 默认色板组 Swatch Group Type : 0 Page Count : 13 Creator : Adobe Illustrator CC 2015 (Windows)EXIF Metadata provided by EXIF.tools