Huawei Technologies C2800 CDMA Mobile Phone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	785109
Application ID	CjQ6m7x3J2H8BN4dbAHw1g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.26kB (290693 bits)
Date Submitted	2007-04-26 00:00:00
Date Available	2007-04-26 00:00:00
Creation Date	2007-03-31 14:36:27
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2007-03-31 14:36:27
Document Title	Microsoft Word - C2800 User Guide-市场.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	l52297

C2800
CDMA 1X Mobile Phone
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other
trademarks and trade names mentioned in this document are the property of their respective holders.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
Huawei Technologies Co.,Ltd.
Address: Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129, People's Republic of China
Tel: +86-755-28780808
Global Hotline: +86-755-28560808
E-mail: mobile@huawei. com
Website: www.huawei.com
Your Phone
Earpiece
Screen
Navigation Keys
Left Soft Key
Talk /Send Key
Right Soft Key
End /Power Key
OK Key
OK
Number Keys
Vibrate Only Key
Keyguard Key
Speaker
Charger Interface
/Data Cable Connector
/Headset Jack
Keys and Functions
Press…
To…
View the call log in the standby mode.
Make or answer a call.
Power on or off the phone (by pressing and holding
it).
End a call or reject an incoming call.
Return to the home screen.
Press…
To…
Display the Magic interface in the standby mode.
z Confirm a selection.
Select the option displayed on the lower left corner of
the screen.
Select the option displayed on the lower right corner of
the screen.
Display the Profiles interface (
interface (
), the Create Message interface (by
pressing and holding
), the Messages
), the Scheduler interface
), and the Alarms interface (
) in the
standby mode.
Increase the volume (
–
) or decrease the volume
) during a call.
Enter numbers, letters, and symbols.
Access the voice mailbox in the standby mode (by
pressing and holding the 1 key).
Speed-dial phone numbers in the standby mode (by
pressing and holding the 2–9 keys).
Select a submenu item labeled with the
corresponding number.
Press…
To…
Enter the * symbol.
Enable or disable the meeting profile (by pressing
and holding it).
Provide different functions according to the phone
features being used.
Enter the # symbol.
Lock the keypad in the standby mode (by pressing
and holding it).
Provide different functions according to the phone
features being used.
Screen Icons
Icon
Description
Network signal strength
Icon
Description
Battery power level
No network signal
Data service
CDMA 1X network
Alarm clock on
Domestic roaming
General profile
Overseas roaming
Silence profile
Calling
Meeting profile
Call privacy enabled
Outdoor profile
Keypad locked
My profile
Message received
Open Handsfree
Memory for messages full
Close Handsfree
Urgent message received
Voice mail received
Menu Tree
Messages
1 Create Message
2 Inbox
3 Outbox
4 Drafts
5 Voice Mail
6 Templates
7 Recipients List
8 My Folder
9 Settings
0 Delete All
Call Histor
Log y
1 All Calls
2 Missed Calls
3 Received Calls
4 Dialed Calls
5 Call Memo
6 Call Durati on
Profiles
Profiles
1 General
2 Silence
3 Meeting
4 Outdoor
5 My Profile 1
6 My Profile 2
Brew
Tools
1 Recorder
2 Alarms
3 Schedulers
4 Calculator
5 Stopwatch
6 World Clock
7 Gallery
Settings
1 Display Settings
2 Date & Ti me
3 Call Settings
4 Phone Settings
5 Security Settings
6 Restore Fatory
Settings
Brew
Radio
1 Automatic Tuning
2 Manual Tuning
3 Inching Tuning
4 Set Frequency
1 UTK
2 BAM
Contacts
1 Search
2 Search by
Location
3 Add New
4 Groups
5 Speed Dial
6 My Number
7 Management
Installing the UIM Card and Battery
Contact the network operator whether a UIM card is needed.
Make sure that the golden area on the UIM card faces downwards
and the cut-off edge is correctly aligned with the card holder.
Removing the Battery and UIM Card
Make sure that your phone is powered off.
Charging the Battery
1. Connect the charger to the charger interface at the bottom of your
phone.
Make sure that the side labeled "TOP" of the charger faces the
front side of the phone.
2. Connect the charger to an alternating current (AC) power socket.
3. During the charging, the charging icon is displayed in the
animated status.
When the charging icon becomes static, the phone is fully
charged.
4. Disconnect the charger from the AC power socket.
5. Press the gray buttons on both sides of the charger connector
inwards to disconnect the charger from the phone.
Using the Function Menu
1. In the standby mode, press
2. Press
to display the Menu interface.
to scroll to a menu item.
3. Press
(Select) or
to display the menu.
4. Do the following to display the submenu:
¾ Press
to scroll to a submenu item and press
to display the submenu.
(Select) or
¾ Press the number key corresponding to the number of a
submenu to display it.
5. Press
(Back) to return to the previous menu or quit the
function menu.
Alternatively, press
to return to the home screen.
Making a Call
1. In the standby mode, enter a phone number.
To make an international call, press
twice to enter the
international long distance code of "+". Then enter the number to
be dialled, in the format of "country code + region code + phone
number".
To call a number with an extension, press
third to insert
"P" or press
fourth to insert "T" between the phone
number and the extension number.
2. Press
to dial the number.
3. Press
to end the call.
Note
When the phone is locked, enter the lock code to unlock
the phone first; otherwise, you can make only emergency
calls or answer calls.
In the standby mode, press
Select a record and press
Select a contact from the phonebook and press
dial.
to view the call log.
to dial.
to
Answering a Call
When there is an incoming call, press
to reject it.
to answer it, or press
(Answer), or
If the any key answer function is enabled, press any key (except
or
) to answer an incoming call.
If the headset auto answer function is enabled, and the headset is
connected to the phone, the incoming call is answered
automatically.
Note
If the headset is connected to the phone, you can press the
button on the headset cable to answer or end a call.
Phone Lock
The phone lock protects your phone from unauthorized use. The
default phone lock code is 000000. You can change it into any
numeric string of 4 to 8 digits.
If the phone lock is enabled, you need to enter the correct phone lock
code when the phone is powered on.
PIN and PUK
The personal identity number (PIN) protects your UIM card from
unauthorized use. The PIN unlocking key (PUK) can unblock the
blocked PIN. Both PIN and PUK are delivered with the UIM card.
For details, contact your service provider.
If you enter wrong PINs three times consecutively, the phone asks
you to enter the PUK code.
If you enter wrong PUKs ten times, the UIM card is invalidated
permanently. Contact your service provider for a new card.
Locking the Keypad
In the standby mode, press and hold
When the keypad is locked, press
make emergency calls.
to lock the keypad.
to answer incoming calls or
You can press
and
to unlock the keypad.
When the keyguard function is enabled, if there is no operation on
the phone for a preset period, the keypad is locked automatically.
Changing the Text Input Modes
The indicator of the current text input mode is displayed on the
screen. When no letters are selected in the input field, press
to
to
change the input mode. When letters are selected, press
change the letters between lowercase and uppercase.
Note
In the editing mode, press
(Clear) once to delete
the letter on the left of the cursor. Press and hold
(Clear) to delete all the letters at a time.
In the "En" input mode, press
the "Abc" input mode, press
space and twice to enter 0.
In the "Abc" , "abc" or "ABC" input mode, press
repeatedly to select and enter the commonly-used
punctuations. In the "En" input mode, press
repeatedly to enter a full stop or smiley.
to enter a space. In
once to enter a
Entering English (En)
In the "En" input mode, do the following to enter the English letters:
1. Press each desired key once corresponding to the sequence of the
letters. Then the phone displays the commonly-used words
according to the numeric sequence of key presses.
2. Press
to scroll to the desired word.
3. Press
to select the word.
to enter the word and a space.
Press
Entering English (Abc/abc/ABC)
In the "Abc" , "abc" or "ABC" input mode, press a key labeled with
the desired letters once to enter the first letter on the key, twice to
enter the second letter on the key, and so on.
Note
If the letter you want to enter is on the same key as the
previous one, enter the latter only after the cursor appears
to move the cursor to the
again or after you press
next space.
Entering Numbers
1. In the "123" input mode, press a key labeled with the desired
number.
2. In the "Abc" , "abc" or "ABC" input mode, press a key
continuously or press and hold it until the desired number appears
on the screen.
3. In the "En" input mode, press a key and then press
the desired number appears on the screen.
until
Entering Symbols
1. In any input mode, press
2. Press
to display a symbol list.
to scroll to the desired symbol.
3. Press the numeric key to enter the symbol.
10
Warnings and Precautions
Electronic Device
Power off your phone near high-precision electronic devices. The
phone may affect the performance of these devices.
Such devices include hearing aids, pacemakers, fire alarm systems,
automatic gates, and other automatic-control devices. If you are using
an electronic medical device, consult the device manufacturer to
confirm whether the radio wave affects the operation of this device.
Pacemaker manufacturers recommend that a minimum separation of
15cm be maintained between a mobile phone and a pace-maker to
avoid potential interference with the pace-maker. To achieve this use
the phone on the opposite ear to your pacemaker and do not carry it in
a breast pocket.
Hospital
Pay attention to the following points in hospitals or health care facilities:
Do not take your phone into the operating room (OR), intensive care
unit (ICU), or coronary care unit (CCU).
Do not use your phone at places for medical treatment where phone
use is prohibited.
When using your phone near someone who is suffering from a heart
disease, turn down the ring tone volume or vibration properly so that it
does not affect the person.
Area with Inflammables and Explosives
In any area with inflammables and explosives, power off your phone and
do not take out, install or charge the battery, to avoid explosion and fire.
Areas with inflammables and explosives include, but are not limited to:
z Gas station
Area for storing fuels (such as the bunk under the deck of a ship)
Device/Vehicle for transporting and storing fuels or chemical products
Area with chemical substances and particles (such as: granule, dust,
metal powder) in the air
Area with the sign of "Explosives"
Area with the sign of "Power off bi-direction wireless equipment"
Area where it is generally suggested to stop the engine or a vehicle
11
Traffic Safety
Please observe local laws and regulations on phone use. Do not use
your phone while driving to avoid traffic accident.
Secure the phone on its holder. Do not place the phone on the seat or
other places where it can get loose in a sudden stop or collision.
Use the phone after the vehicle stops at a safe place.
If your phone supports the hands-free function, or the phone can be
used with earphones, or there is any vehicle-mounted equipment with
hands-free function, use them in emergency.
Do not place the phone over the air bag or in the air bag outspread area.
Otherwise, the phone may hurt you owing to the strong force when the
air bag inflates.
Observe the rules and regulations of airline companies. When boarding
or approaching a plane, power off the phone and take out the battery. In
areas where phone use is prohibited, power off the phone. Otherwise,
the radio signal of the phone may disturb the plane control signals.
Power off your phone before boarding an aircraft.
Storage Environment
Do not place magnetic storage media such as magnetic cards and
floppy disks near the phone. Radiation from the phone may erase the
information stored on them.
Do not put your phone, battery, or other accessories in containers with
strong magnetic field, such as an induction cooker and a microwave
oven. Otherwise, circuit failure, fire, or explosion may occur.
Do not leave your phone, battery, or charger in a very hot or cold place.
Otherwise, malfunction of the products, fire, or explosion may occur.
Keep the ambient temperature between 0℃ and 45℃ while the battery
is being charged. Keep the ambient temperature between –20℃ and
60℃ for storing the battery. If the ambient temperature is too low
(especially below 0℃) or too high, the capacity and life of the battery
will be reduced.
Do not place sharp metal objects such as pins near the earpiece. The
earpiece may attract these objects and hurt you when you are using the
phone.
Do not subject your phone, battery, and charger to serious collision or
shock. Otherwise, battery leakage, phone malfunction, overheat, fire, or
explosion may occur.
12
z
Do not put your phone in the back pocket of your trousers or skirt, to
avoid phone damage while seated.
Children Safety
Put your phone, battery, and charger in places beyond the reach of
children. Do not allow children to use the phone, battery, or charger
without guidance.
Do not allow children to put the battery in mouth, for electrolyte in the
battery is poisonous.
Do not allow children to touch the small fittings. Otherwise, suffocation
or gullet jam can be caused if children swallow the small fittings.
Operating Environment
The phone, battery, and charger are not water-resistant. Keep them dry.
Protect the phone, battery and charge from water or vapor. Do not
touch the phone with a wet hand. Otherwise, short-circuit and
malfunction of the product or electric shock may occur.
Do not use the phone in dusty, damp and dirty places or places with
magnetic field. Otherwise, malfunction of the circuit may occur.
Do not power on or off the phone when it is near your ears to avoid
negative impact on your health.
When carrying or using the phone, keep the antenna at least one inch
(2.5 centimeters) away from your body, to avoid negative impact on
your health caused by radio frequency leakage.
If you feel uncomfortable (such as falling sick or qualm) after playing
games on your phone for a long time, please go to see a doctor
immediately.
On a thunder stormy day, do not use your phone outdoors or when it is
being charged.
Do not touch the antenna when a call is going on. Touching the antenna
may affect call quality and cause the phone to operate with more power.
As a result, the talk time and standby time are shortened.
The phone may interfere with nearby TV sets, radios and PCs.
In accordance with international standards for radio frequency and
radiation, use phone accessories approved by the manufacturer only.
While using the mobile phone, observe the local laws and regulations,
and respect others' privacy and legal rights.
13
Clearing and Maintenance
Before you clean or maintain the phone, power off the phone and
disconnect it from the charger. Otherwise, electric shock or short-circuit
of the battery or charger may occur.
Do not use any chemical detergent, powder, or other chemical agent
(such as alcohol and benzene) to clean the phone and the charge.
Otherwise, part damage or a fire can be caused. You can clean the
phone and the charger with a piece of soft antistatic cloth that is a little
wet.
Do not scratch the shell of the phone. Otherwise, the shed coating may
cause skin allergy. Once it happens, stop using the phone at once and
go to see a doctor.
Keep the plug dry when you clean it, to prevent fire.
If the phone or any of its fittings does not work, turn to the local
authorize service center for help.
Do not dismantle the mobile phone or accessories. Only an authorized
service center is allowed to maintain the mobile phone.
Environment Protection
Please observe the local regulations regarding the disposal of your
packaging materials, exhausted battery and old phone and please
promote their recycling. Do not dispose of exhausted battery or old
phone in municipal waste or fire. Otherwise, explosion may occur.
This HUAWEI device complies with Directive 2002/95/EC on the
restriction of the use of certain hazardous substances in electrical and
electronic equipment.
Emergency Call
You can use your phone for emergency calls. However, connections in all
conditions cannot be guaranteed. You should never rely solely on the
phone for essential communications.
Battery
Use the battery approved by the manufacturer only. Otherwise,
explosion may occur.
Do not dispose of the battery in fire. Otherwise, the battery may ignite
or explode.
14
z
Do not connect two poles of the battery with conductors such as cables,
jewelries or any other metal material. Otherwise, the battery is
short-circuited and it may burn your body.
Do not disassemble the battery or solder the battery poles. Otherwise
fluid leakage, overheat, fire, or explosion may occur.
If there is battery leakage, smoke, or strange smell, stop using the
battery and keep it away from open flame to avoid fire or explosion.
Then turn to an authorized maintenance engineer for help.
If the battery fluid contacts your skin or cloth, wash with clean water
immediately to avoid irritation to the skin.
If the battery fluid gets into eyes, do not rub your eyes. Otherwise, your
eyes can be hurt. Wash with clean water and go to see a doctor
immediately.
If there is battery deformation, color change or abnormal heating while
you charge or store the battery, take it out immediately and stop using it.
Otherwise, battery leakage, overheat, explosion, or fire may occur.
When installing the battery, do not push the battery by force lest battery
fluid leak out or the battery crack.
Do not take out the battery when the phone is turned on.
If you do not use the battery for a long time, store it in normal
temperature after charging.
Charger
Use the charger approved by the phone manufacturer only. Any
violation of this rule may result in fire or malfunction of the charger.
Do not short-circuit the charger. Short-circuiting the charger may cause
fire or malfunction of the charger.
If the power cord is damaged (for example, the lead is exposed or
broken), or the plug becomes loose, stop using the cable at once.
Otherwise, electric shock, short-circuit of the charger, or fire may occur.
Keep the charger dry. Once water or other liquid leaks into the charger,
electrical leakage or other faults may occur.
Do not use the charger in a dusty and damp environment. Keep the
power cord away from any heating appliance.
Ensure the charger is properly plugged into the power socket properly
when charging the battery. Improper insertion may result in electric
shock, fire, or explosion. To unplug the charger, pull the plug off rather
than tear the power cord.
15
z
Use the AC power supply defined in the specifications of the charger.
An improper power voltage can cause fire or malfunction of the charger.
Do not place any heavy object on the power cord of the charger. Do not
damage, change, or pluck the power cord. Otherwise electric shock or
fire may occur.
When you are charging the battery with the charger, do not touch the
plug, power cord or the charger with a wet hand. Otherwise, electric
shock can be caused.
Once the liquid such as water leaks into the charger, remove the plug of
the charger from the socket immediately. Otherwise, overheating, fire
and other malfunction may occur.
Certification Information (SAR)
THIS DEVICE MEETS THE GOVERNMENT'S REQUIREMENTS FOR
EXPOSURE TO RADIO FREQUENCY ELECTROMAGNETIC FIELD.
Your mobile phone is a low-power radio transmitter and receiver. When it is
turned on, it emits low levels of radio frequency energy (also known as
radio waves or radio frequency fields).
Governments around the world have adopted comprehensive international
safety guidelines, developed by scientific organizations, e.g. ICNIRP
(International Commission on Non-Ionizing Radiation Protection) and IEEE
(Institute of Electrical and Electronics Engineers Inc.), through periodic and
thorough evaluation of scientific studies. These guidelines establish
permitted levels of radio wave exposure for the general population. The
levels include a safety margin designed to assure the safety of all persons,
regardless of age and health, and to account for any variations in
measurements.
Specific Absorption Rate (SAR) is the unit of measurement for the amount
of radio frequency energy absorbed by the body when using a mobile
phone. The SAR value is determined at the highest certified power level in
laboratory conditions, but the actual SAR level of the mobile phone while
operating can be well below the value. This is because the mobile phone is
designed to use the minimum power required to reach the network.
All models of Huawei’s mobile phone are designed to meet radio frequency
exposure guidelines. Before a phone model is available for sale to the
public, it must be tested and certified to the FCC that it does not exceed the
limit established by the government-adopted requirement for safe
exposure. The tests are performed in positions and locations (that is, at the
ear and worn on the body) as required by the FCC for each model. For
16
body worn operation, this phone has been tested and meets FCC RF
exposure guidelines when the handset is positioned a minimum of 15 mm
from the body with an accessory that contains no metal part. Use of other
accessories may not ensure compliance with FCC RF exposure
guidelines.
The SAR limit adopted by the USA and Canada is 1.6 watts/kilogram (W/kg)
averaged over one gram of tissue. The highest SAR value reported to the
FCC and IC for this device type when tested for use at the ear is 0.957
W/kg, and when properly worn on the body is 0.507 W/kg.
The SAR limit adopted by the CNIRP is 2.0W/kg over one gram of tissue.
The value guarantees a safe distance to protect mobile phone users and
the difference caused by measurement errors. Under different test
requirements and frequency, the value varies.
Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications made to this equipment not expressly
approved by HUAWEI may void the FCC authorization to operate this
equipment.
Version: V100R001C16_01
17
BOM: 31017412

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2007:03:31 14:36:27+08:00
Create Date                     : 2007:03:31 14:36:27+08:00
Format                          : application/pdf
Title                           : Microsoft Word - C2800 User Guide-市场.doc
Creator                         : l52297
Document ID                     : uuid:f2115e4c-4ed0-4682-864c-94d376d07612
Instance ID                     : uuid:5e667faa-b029-47f1-b4e0-f73f988581cf
Page Count                      : 18
Author                          : l52297

EXIF Metadata provided by EXIF.tools