Huawei Technologies E3735 HSPA Express Data Card User Manual

Huawei Technologies Co.,Ltd HSPA Express Data Card

Contents

User manual Appendix rev

 Additional Flyer Federal Communication Commission Interference Statement 15.19 NOTICE: This device complies with Part 15 of the FCC Rules [and with RSS-210 of Industry Canada]. Operation is subject to the following two conditions: (1)  this device may not cause harmful interference, and   (2)  this device must accept any interference received, including interference that may cause undesired operation. 15.21 NOTICE: Changes or modifications made to this equipment not expressly approved by (manufacturer name) may void the FCC authorization to operate this equipment. 15.105 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:    Reorient or relocate the receiving antenna.    Increase the separation between the equipment and receiver.    Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.    Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instruction as documented in this manual.   This transmitter must not be co-located or operating in conjunction with any other antenna
 or transmitter. SAR compliance has been established in typical laptop computer(s) with Express card slot, and product could be used in typical laptop computer with Express card slot. Other application like handheld PC or similar device has not been verified and may not compliance with related RF exposure rule and such use shall be prohibited.  The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.  CAUTION:  The Express Data Card has been tested with specific integral antenna for SAR compliance with one notebook computers. The device can be used in notebook computers with substantially similar physical dimensions, construction, and electrical and RF characteristics.  Note: If this Express Data Card is intended for use in any other portable device, you are responsible for separate approval to satisfy the SAR requirements of Part 2.1093 of FCC rules. This transmitter and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
 1 Safety Information Read the safety information carefully to ensure the correct and safe use of your wireless device. Interference Do not use your wireless device if using the device is prohibited or when it cause danger or interference with electric devices. Medical Device y Do not use your wireless device and follow the rules and regulations set forth by the hospitals and health care facilities. y Some wireless devices may affect the performance of the hearing aids. For any such problems, consult your service provider. y If you are using an electronic medical device, consult the doctor or device manufacturer to confirm whether the radio wave affects the operation of this device. Area with Inflammables and Explosives To prevent explosions and fires in areas that are stored with inflammable and explosive devices, do not use your wireless device and observe the rules. Areas stored with inflammables and explosives include but are not limited to the    following: y Gas station y Fuel depot (such as the bunk below the deck of a ship) y Container/Vehicle for storing or transporting fuels or chemical products y Area where the air contains chemical substances and particles (such as granule, dust, or metal powder) y Area indicated with the "Explosives" sign y Area indicated with the "Power off bi-direction wireless equipment" sign y Area where you are generally suggested to stop the engine of a vehicle Traffic Security y Observe local laws and regulations while using the wireless device. To prevent accidents, do not use your wireless device while driving. y RF signals may affect electronic systems of motor vehicles. For more information, consult the vehicle manufacturer. y In a motor vehicle, do not place the wireless device over the air bag or in the air bag deployment area. Otherwise, the wireless device may hurt you owing to the strong force when the air bag inflates.
 2 y Observe the rules and regulations of airline companies. When boarding, switch off your wireless device. Otherwise, the radio signal of the wireless device may interfere with the plane control signals. Safety of Children Do not allow children to use the wireless device without guidance. Small and sharp components of the wireless device may cause danger to children or cause suffocation if children swallow the components. Environment Protection Observe the local regulations regarding the disposal of your packaging materials, used wireless device and accessories, and promote their recycling. WEEE Approval The wireless device is in compliance with the essential requirements and other relevant provisions of the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE Directive). RoHS Approval The wireless device is in compliance with the restriction of the use of certain hazardous substances in electrical and electronic equipment Directive 2002/95/EC (RoHS Directive). Laws and Regulations Observance Observe laws and regulations when using your wireless device. Respect the privacy and legal rights of the others. Care and Maintenance It is normal that your wireless device gets hot when you use or charge it. Before you clean or maintain the wireless device, stop all applications and disconnect the wireless device from your PC. y Use your wireless device and accessories with care and in clean environment. Keep the wireless device from a fire or a lit cigarette. y Protect your wireless device and accessories from water and vapor and keep them dry. y Do not drop, throw or bend your wireless device. y Clean your wireless device with a piece of damp and soft antistatic cloth. Do not use any chemical agents (such as alcohol and benzene), chemical detergent, or powder to clean it. y Do not leave your wireless device and accessories in a place with a considerably low or high temperature. y Use only accessories of the wireless device approved by the manufacture. Contact the
 3 authorized service center for any abnormity of the wireless device or accessories. y Do not dismantle the wireless device or accessories. Otherwise, the wireless device and accessories are not covered by the warranty. Specific Absorption Rate (SAR) Your wireless device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health. The guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for wireless devices is 2.0 W/kg and the highest SAR value for this device when tested complied with this limit. Regulatory Information The following approvals and notices apply in specific regions as noted. CE Approval (European Union) The wireless device is approved to be used in the member states of the EU. The wireless device is in compliance with the essential requirements and other relevant provisions of the Radio and Telecommunications Terminal Equipment Directive 1999/5/EC (R&TTE Directive). Federal Communications Commission Notice (United States): Before a wireless device model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The SAR limit adopted by the USA and Canada is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The highest SAR value reported to the FCC for this device type was compliant with this limit. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. * This device should be installed and operated with a minimum distance of 20 cm between the radiator and your body when using it via USB cable.
 4                               Version: V100R001_02 Part Number: 31220741
Quick Start GuideVodafone Mobile ConnectCard with 3G broadbandDesignedfor Vodafone
Welcome to the world of mobile communications 1Welcome2 Set up your card3 Start the software4 Software overview5 Connect6 SMS text messaging8 SMS contacts9 Card LED lights9 Signal strength10 Hints and tips12 Glossary
1Your new Vodafone Mobile Connect Card with 3G broadband lets you connect your computer to the internet over the Vodafone high-speed mobile phone network.Browse the webYou can now access the web and any other internet service wherever there’s a mobile phone network .Pick up emailsKeep up to date with your emails, wherever you are. You can also access your personal email accounts – even web-based accounts like Hotmail.Send and receive SMS text messages*You can send and receive SMS text messages straight from your computer. Vodafone SMS provides an easy way to view messages, write new ones, and manage contact details.System RequirementsTo use this card and the Vodafone Mobile Connect software, you need:–  A computer running Microsoft® Windows Vista™, Windows® XP SP2 or Windows® 2000, or an Apple Mac running Mac OS® X 10.3.9 or above– At least 50 MB free disk space and 256 MB RAM memory–  An ExpressCard™ slot– Administrator rights on your computer.Welcome* SMS is currently only supported on computers running Microsoft Windows.
2•  Insert the SIM into the card as shown.•  Insert the data card with a SIM card into the ExpressCard slot of a laptop.•  The low profi le data card has a built-in aerial – simply press the end and it will extend. When you have fi nished, push it back into the data card until it clicks.Set up your cardYour SIM (Subscriber Identity Module is the small, postage-stamp-sized chip that you received together with your mobile subscriber contract.
3On Microsoft Windows computersThe fi rst time you plug your card into a PC the software setup should start automatically, and proceed to set up your card. If for some reason the setup does not start, right click on the VMC Lite 9.3.x.x drive in ‘My Computer’ (Start Menu, Computer for Vista machines), select Explore and double-click the fi le called setup.exe on the card. Follow the on-screen instructions.Setting up your card may take a few minutes, but once the setup is fi nished, the Vodafone Mobile Connect Lite software should start automatically. If for some reason the program does not start, select Vodafone Mobile Connect from the Windows Start menu.On Mac OS X computersThe fi rst time you plug in your card, it will show up on your desktop like a standard memory stick. From the card window, double-click the fi le called Vodafone MC Installer, and follow the on-screen instructions. Once your Mac has restarted, the card will no longer appear, but you will see the Vodafone Mobile Connect software in your Applications folder. Double-click the program to set up a mobile connection.Start the software
Connect/DisconnectConnect via the mobile phone networkViewsView data usage, and additional software settingsStart SMS programSend, receive and manage SMS messages  and contactsStatusCheck the status of your connectionHelpHelp Topics, plus internet and hotline support.4Software overview5142343512The first time you run the software, your card will usually be set as the default device. If it is not, click ‘Manage Devices’ and select your card there.
5The radio waves on the Mobile Connections icon are animated whenever data is being transferred over the connection.No radio waves are shown when nothing is being transferred.The radio waves are shown static when no connection is open.If a mobile network has been found, the Connect button in the Mobile Connections panel will be enabled. Clicking Connect connects to the internet across the mobile phone network. Now you can browse the web or use email.When connected, the Connect button text changes to Disconnect and a green ‘Connected’ indicator appears below the button. Clicking the Disconnect button will close the connection – and the text on the button will revert to Connect.To open a mobile connection, you need to be within coverage of a mobile network. As a rule, anywhere you can make a call on your mobile phone, you should be able connect.Connect
6Click Vodafone SMS on the navigation bar in the main window of the Vodafone Mobile Connect Lite software to open the SMS program.To send an SMSClick New at the left-hand end of the SMS toolbar to create a new SMS text message.AddressEnter the recipients here, or choose them from ContactsMessageWrite your message hereSendClick on the Send button to send your message.After your SMS has been sent, it will be stored in the Sent list.SMS Text Messaging213The number displayed to the person who receives your message will be from your data SIM, not your mobile phone. Use a short ‘signature’ to make sure people know you sent them a message: Settings/Messages/Signature.213
7Receiving SMSWhen you receive a new message, an SMS Notifi cation is shown briefl y so you can respond to it directly. The received message can also be read from the Inbox in the main Vodafone SMS window.The Vodafone SMS software will receive text messages whenever you have mobile network coverage.
8SMS Contacts Click Contacts on the SMS navigation bar to open the Contacts list, in which you can save SMS numbers that you use frequently as contacts with names.New SMS ContactClicking the New button on the SMS toolbar opens a new contact window.Enter the name and number of your contact using the international format for the number, eg. +447774477000.
9Card LED lightsSignal strengthThe LED light on your card shows which kind of mobile network has been found, and whether the card is connected to that network.Green blinkingA GPRS network has been found – you could connectGreen solidConnected via GPRS Blue blinkingA 3G network has been found – you could connectBlue solidConnected via 3GLight blue solidConnected via 3G Broadband.The strength of the mobile network signal is shown by the symbol to the left of the Connect button, and by the icon in the Windows Notifi cation area. The more bars that are fi lled in, the better the mobile network signal quality. At least one bar must be fi lled in order to connect.
10Hints and tips If you don’t see your card in the list of devices– Remove the card– Re-start your computer– Re-insert the card.If no network can be found–  Change your physical location: in a building, move closer to a window, move higher up, or go outside–  (Windows) Select ‘View/View Available Mobile Connections’ and see if you can connect to a particular network in the list shown–  Contact Support, and check that data services and roaming are enabled on your account.If no connection can be opened–  Wait a few minutes and try to connect again. This is most often a temporary problem, especially if an ‘Error 631’ or ‘Error 619’ is referenced. If it persists please call Vodafone Support on the number on the next page –  Select ‘File/Exit’ to exit the Vodafone Mobile Connect Lite software completely, and then re-start it again– Re-start your computer–  (Windows) Click ‘Manage’, select your device, click edit and then select a different network preference on the Network Preference tab page, eg. ‘3G Only‘–  (Mac) Start the Vodafone Mobile Connect software, and select one of the other options in the lower part of the main window, eg. ‘3G Only‘–  If you are using a VPN (Virtual Private Network), contact your company IT administrator.If you have problems when roaming–  (Windows) Select ‘View/Available Mobile Connections’ and try opening one of the connections shown– Contact Support, and check roaming is enabled for your account
11For further help, please visit www.support.vodafone.com, or call Vodafone Support on XXX or XXXXXXX.–  Check the name of the current network in the Mobile Connections panel. If it is not Vodafone or a Partner, select a different network from ‘View/Available Mobile Connections’.If the connection keeps switching between GPRS and 3G–  (Windows) Click ‘Manage Devices’, select your device, click edit and then select a different network preference on the Network Preference tab page, eg. ‘3G Only’’–  (Mac) Start Vodafone Mobile Connect, and select one of the other options in the lower part of the main window–  Switch back to your normal preference when you move locations.If you are using a Windows machine and VMCLite does not install and/or the install progress bar keeps looping, this can indicate a failure with Windows detecting the device components–  Go to Device Manager (normally located under Control Panel and System headings. Refer to Windows Help and Support for further information on how to access Device Manager)–  Expand the ‘Universal Serial Bus Controllers’ heading–  Right click the ‘USB Mass Storage Device’ and select ‘Uninstall’–  Once done if the devices do not automatically reload go to ‘Action’ and ‘Scan for Hardware changes’–  If this still does not resolve please contact Vodafone Support.Check software update preferences–  Set your operating system and other programs to notify you of software updates instead of downloading them automatically – otherwise they may slow down your mobile connection, or exceed your data usage limit.Usage indication–  The usage window only displays an indication of your data usage. Please refer to your invoice for the actual amount of data transferred.
12Glossary Built-in data cardMobile data card built into notebook computer. Enables data connections over the mobile phone network.Data card/USB stickA device for a computer that is used to open a data connection over the mobile phone network.EDGE An enhancement to GPRS networks offering higher speeds, although not as fast as those provided by 3G, or 3G Broadband.EV-DO A high-speed mobile data standard used mostly in the USA. Frequent travellers to the USA should contact their mobile network operator about using special Vodafone Mobile Connect data cards and software in the USA.GPRS Standard for transferring data over mobile phone (GSM) networks. It generally provides wide coverage and moderate data speeds. (General Packet Radio System).GSM A standard for mobile telecommunications (Global System for Mobile communications), supported by over 680 operators in 210 countries and territories.3G Often referred to as the 3rd Generation of GSM technologies, UMTS (Universal Mobile Telecommunications System) provides higher data speeds.3G broadband An evolution of 3G to provide faster data speeds. Like many fi xed-line ‘broadband’ services, 3G broadband provides a faster download speed than upload speed.Roaming Connecting via networks other than your own operator’s network. This typically occurs when you are abroad, but is also possible in your own country.SIM The ‘Subscriber Identity Module’ is the small, postage-stamp-sized chip that you will have received together with your mobile subscriber contract. The SIM has gold contacts on one side.
© Vodafone 2008. Vodafone and the Vodafone logos are trade marks of the Vodafone Group. Any product or company names mentioned herein may be the trade marks of their respective owners.Product Code: E3735 VMCLite 9.3 05/08-DVD_en_GB

Navigation menu