Huawei Technologies E5776U-72 Mobile Cellular Device with GSM/GPRS/EDGE 1900, WCDMA/HSPA/DC-HSPA FDD II/V, CDMA EVDO BC0. User Manual QSG

Huawei Technologies Co.,Ltd Mobile Cellular Device with GSM/GPRS/EDGE 1900, WCDMA/HSPA/DC-HSPA FDD II/V, CDMA EVDO BC0. QSG

Contents

User Manual (QSG)

1 Thank you for choosing HUAWEI Mobile WiFi Supported functions and actual appearance depend on the specific models you purchased. The illustrations are provided for your reference only. For details about the model you selected, consult your service provider. This guide briefly describes the functions of the Mobile WiFi. For more details, see help on the web management page. Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved. THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY KIND OF WARRANTIES.
2 Getting to Know HUAWEI Mobile WiFi Connection Scenario A Wi-Fi device can be connected to the Internet through the Mobile WiFi. The actual connection procedure depends on the operating system of the Wi-Fi device. The connection scenario illustrated here is for your reference. Scenario 1: Multi-device access via Wi-Fi Scenario 2: One-device access via USB
3 Scenario 3: Multi-device access via Wi-Fi and USB at the same time
4 Appearance No. Item 1 Screen 2 Power button 3 micro-SIM card slot 4 Reset button 5 Strap hole 6 WPS button  Press and hold it until a WPS activation animation is displayed to enable the WPS function. 7 USB port 2345 6 71
5 Screen No. Item 1 Signal strength 2 Network 3 Battery level 4  Wi-Fi enabled  Number of devices connected 5 International roaming state 12345R3G
6 SSID and Wireless Network Key To connect a Wi-Fi device to your Mobile WiFi, an SSID and a wireless network key are required. The default SSID and wireless network key can be found in the gift box. Before You Start Installing the micro-SIM Card Caution: Do not use any micro-SIM card that is not standard or is incompatible with the Mobile WiFi. Otherwise, the Mobile WiFi may be damaged. 1. Remove the rubber cap from the micro-SIM card slot. Then insert the micro-SIM card into the slot. Be sure that the micro-SIM card is facing in the right direction. 2. After inserting the micro-SIM card completely, attach the rubber cap. Note:  To remove the micro-SIM card, press in the card gently. The micro-SIM card will pop
7 out for removal.  Do not remove the micro-SIM card when the card is in use. Otherwise, the card as well as your Mobile WiFi may get damaged and the data stored on the card may be corrupted. Charging the Battery Charge your Mobile WiFi the first time you use it or if it has not been used for a long time. Method 1: Using the charger Caution:  Only use chargers compatible with the Mobile WiFi and provided by a designated manufacturer (HW-050200U3W). Use of an incompatible charger or one from an unknown manufacturer may cause the Mobile WiFi to malfunction, fail, or could even cause a fire. Such use voids all warranties, whether expressed or implied, on the product.
8 Method 2: Connecting to a PC for charging Connect the Mobile WiFi to a PC using a compatible data cable.
9 Accessing the Internet via Wi-Fi Connection By default, management parameters are preset on the Mobile WiFi according to the requirements of the service provider. Follow the steps below to quickly access the Internet. Step1: Power on the Mobile WiFi Press and hold until the screen lights up. The Mobile WiFi is powered on. Note: Press and hold to power off the Mobile WiFi.
10 Step2: Establish a Wi-Fi Connection (Take a computer with Windows XP operating system as an example) 1. Make sure that the Wi-Fi is enabled. 2. Select Start > Control Panel > Network Connections > Wireless Network Connection. Note: To set up a Wi-Fi connection, the PC must have a wireless network adapter installed. If Wireless Network Connection is displayed, a wireless network adapter is available. Otherwise, check to make sure you have a wireless network adapter installed. 3. Click View available wireless networks to display a list of wireless networks available. 4. Select a network indicated by the SSID of the Mobile WiFi, and then click Connect. Note:If the encryption parameter is already set for the Mobile WiFi, the Wireless Network Connection dialog box is displayed. Enter the wireless network key in the dialog box. 5. Wait until the wireless connection icon is displayed in the status area in the lower right corner of the PC screen.
11 Step3: Access the Internet After you establish a Wi-Fi connection successfully, you can access the Internet using the following modes. Caution: Please select a proper Internet connection mode based on your service expense. For example, if you are subscribed to the time-based network service, you are recommended to select Manual mode. For details about the service expense, consult your service provider. Mode Operations Auto After the Mobile WiFi is powered on, it will connect to the Internet automatically. If there is no data transmission over a period of time, the Mobile WiFi automatically terminates the Internet connection. Manual Launch the web management page and follow the prompts to connect to or disconnect from the network.
12 Note:  Launch the web management page to select the mode for accessing the Internet.  You can choose whether to enable the Mobile WiFi to connect to the Internet automatically even while you are roaming. If this function is disabled, the Mobile WiFi automatically disconnects from the Internet while you are roaming. To access the Internet, set up a connection manually. Accessing the Web Management Page 1. Make sure that the connection between the Mobile WiFi and the client is a proper one. 2. Start the Internet browser and enter http://192.168.1.1 in the address bar. 3. Enter the password and log in to the web management page. Note: The default password is admin.
13 Daily Use Power Saving Mode If no operation is performed on the Mobile WiFi within a preset period, the screen turns off. Press any key to light up the screen. If the Mobile WiFi is powered by the battery only, choose whether to enable the Mobile WiFi to turn off Wi-Fi automatically. If this function is enabled and no Wi-Fi devices access the Mobile WiFi for a preset period, the Mobile WiFi turns off Wi-Fi automatically. You can press any key to turn on Wi-Fi again. Validating the PIN Code If PIN code protection is enabled, log in to the web management page and follow the prompts to enter the correct PIN code. Both PIN and PUK are delivered with the SIM card. For details, consult your service provider.
14 Establishing a WPS Connection If a Wi-Fi client connected to the Mobile WiFi supports the WPS function, a wireless network key will be automatically generated without manual input. To establish a WPS connection, perform the following steps: 1. Power on the Mobile WiFi. 2. Start the client. 3. Enable the WPS function of the Mobile WiFi. Note: After Wi-Fi is enabled, press and hold until a WPS activation animation is displayed on the screen to enable the WPS function of the Mobile WiFi. 4. Enable the WPS function of the client. Note: For WPS operations on the client, see the user guide of the client.
15 Restoring Factory Defaults If you forget the changes you have made to some parameters, you may restore factory defaults and reconfigure the Mobile WiFi. To restore the factory defaults, press and hold the Reset button until the screen turns off. All factory default settings are successfully restored. Note: Restoring factory defaults deletes all personal configuration settings and restores all web-based management settings and parameters to their default values. Reset
16 Example 1: Wi-Fi Connection to Game Machine (Sony PSP) 1. Turn on the PSP WLAN switch. 2. Select Settings > Network Settings. 3. Select Infrastructure Mode to connect to your local Wi-Fi access point. 4. Select New Connection to specify an easy to remember connection name. 5. Select Scan to detect all networks within range. The access point list is displayed. 6. Select a network indicated by the SSID of the Mobile WiFi. First press the ► button of your game machine to confirm the SSID and then press it again to input the wireless network key.
17 7. Press the ► button of your game machine to continue, and then press the X button to save the settings. 8. Select Test Connection to check the connection. 9. Go to Internet Browser.
18 Example 2: Wi-Fi Connection to a Smart Phone (iPhone) 1. Select Settings > Wi-Fi, and then turn on Wi-Fi. 2. Automatically detect the networks in range and display the access point list. 3. Select a network indicated by the SSID of the Mobile WiFi. 4. If necessary, enter a password and tap Join. (Networks requiring a password appear with a lock icon.) Note: Some Wi-Fi clients such as iTouch, PS3 and NDSi can also access the Internet via the Mobile WiFi. For details, see the user guides of the Wi-Fi clients.
19 Tips If the Mobile WiFi is placed in an environment with poor ventilation, it may overheat after extended use. When the Mobile WiFi overheats, it will switch off and disconnect from the network automatically to protect itself. If this happens, place the Mobile WiFi in a well-ventilated location, then restart the Mobile WiFi. If you are experiencing difficulties using the Mobile WiFi, try the following:  Restart the Mobile WiFi.  Restore the factory defaults.  Contact your service provider. Version: V100R001_01 Part Number: 3101****

User Manual (QSG

1 Thank you for choosing HUAWEI Mobile WiFi Supported functions and actual appearance depend on the specific models you purchased. The illustrations are provided for your reference only. For details about the model you selected, consult your service provider. This guide briefly describes the functions of the Mobile WiFi. For more details, see help on the web management page. Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved. THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY KIND OF WARRANTIES.
2 Getting to Know HUAWEI Mobile WiFi Connection Scenario A Wi-Fi device can be connected to the Internet through the Mobile WiFi. The actual connection procedure depends on the operating system of the Wi-Fi device. The connection scenario illustrated here is for your reference. Scenario 1: Multi-device access via Wi-Fi Scenario 2: One-device access via USB
3 Scenario 3: Multi-device access via Wi-Fi and USB at the same time
4 Appearance No. Item 1 Screen 2 Power button 3 micro-SIM card slot 4 Reset button 5 Strap hole 6 WPS button  Press and hold it until a WPS activation animation is displayed to enable the WPS function. 7 USB port 2345 6 71
5 Screen No. Item 1 Signal strength 2 Network 3 Battery level 4  Wi-Fi enabled  Number of devices connected 5 International roaming state 12345R3G
6 SSID and Wireless Network Key To connect a Wi-Fi device to your Mobile WiFi, an SSID and a wireless network key are required. The default SSID and wireless network key can be found in the gift box. Before You Start Installing the micro-SIM Card Caution: Do not use any micro-SIM card that is not standard or is incompatible with the Mobile WiFi. Otherwise, the Mobile WiFi may be damaged. 1. Remove the rubber cap from the micro-SIM card slot. Then insert the micro-SIM card into the slot. Be sure that the micro-SIM card is facing in the right direction. 2. After inserting the micro-SIM card completely, attach the rubber cap. Note:  To remove the micro-SIM card, press in the card gently. The micro-SIM card will pop
7 out for removal.  Do not remove the micro-SIM card when the card is in use. Otherwise, the card as well as your Mobile WiFi may get damaged and the data stored on the card may be corrupted. Charging the Battery Charge your Mobile WiFi the first time you use it or if it has not been used for a long time. Method 1: Using the charger Caution:  Only use chargers compatible with the Mobile WiFi and provided by a designated manufacturer (HW-050200U3W). Use of an incompatible charger or one from an unknown manufacturer may cause the Mobile WiFi to malfunction, fail, or could even cause a fire. Such use voids all warranties, whether expressed or implied, on the product.
8 Method 2: Connecting to a PC for charging Connect the Mobile WiFi to a PC using a compatible data cable.
9 Accessing the Internet via Wi-Fi Connection By default, management parameters are preset on the Mobile WiFi according to the requirements of the service provider. Follow the steps below to quickly access the Internet. Step1: Power on the Mobile WiFi Press and hold until the screen lights up. The Mobile WiFi is powered on. Note: Press and hold to power off the Mobile WiFi.
10 Step2: Establish a Wi-Fi Connection (Take a computer with Windows XP operating system as an example) 1. Make sure that the Wi-Fi is enabled. 2. Select Start > Control Panel > Network Connections > Wireless Network Connection. Note: To set up a Wi-Fi connection, the PC must have a wireless network adapter installed. If Wireless Network Connection is displayed, a wireless network adapter is available. Otherwise, check to make sure you have a wireless network adapter installed. 3. Click View available wireless networks to display a list of wireless networks available. 4. Select a network indicated by the SSID of the Mobile WiFi, and then click Connect. Note:If the encryption parameter is already set for the Mobile WiFi, the Wireless Network Connection dialog box is displayed. Enter the wireless network key in the dialog box. 5. Wait until the wireless connection icon is displayed in the status area in the lower right corner of the PC screen.
11 Step3: Access the Internet After you establish a Wi-Fi connection successfully, you can access the Internet using the following modes. Caution: Please select a proper Internet connection mode based on your service expense. For example, if you are subscribed to the time-based network service, you are recommended to select Manual mode. For details about the service expense, consult your service provider. Mode Operations Auto After the Mobile WiFi is powered on, it will connect to the Internet automatically. If there is no data transmission over a period of time, the Mobile WiFi automatically terminates the Internet connection. Manual Launch the web management page and follow the prompts to connect to or disconnect from the network.
12 Note:  Launch the web management page to select the mode for accessing the Internet.  You can choose whether to enable the Mobile WiFi to connect to the Internet automatically even while you are roaming. If this function is disabled, the Mobile WiFi automatically disconnects from the Internet while you are roaming. To access the Internet, set up a connection manually. Accessing the Web Management Page 1. Make sure that the connection between the Mobile WiFi and the client is a proper one. 2. Start the Internet browser and enter http://192.168.1.1 in the address bar. 3. Enter the password and log in to the web management page. Note: The default password is admin.
13 Daily Use Power Saving Mode If no operation is performed on the Mobile WiFi within a preset period, the screen turns off. Press any key to light up the screen. If the Mobile WiFi is powered by the battery only, choose whether to enable the Mobile WiFi to turn off Wi-Fi automatically. If this function is enabled and no Wi-Fi devices access the Mobile WiFi for a preset period, the Mobile WiFi turns off Wi-Fi automatically. You can press any key to turn on Wi-Fi again. Validating the PIN Code If PIN code protection is enabled, log in to the web management page and follow the prompts to enter the correct PIN code. Both PIN and PUK are delivered with the SIM card. For details, consult your service provider.
14 Establishing a WPS Connection If a Wi-Fi client connected to the Mobile WiFi supports the WPS function, a wireless network key will be automatically generated without manual input. To establish a WPS connection, perform the following steps: 1. Power on the Mobile WiFi. 2. Start the client. 3. Enable the WPS function of the Mobile WiFi. Note: After Wi-Fi is enabled, press and hold until a WPS activation animation is displayed on the screen to enable the WPS function of the Mobile WiFi. 4. Enable the WPS function of the client. Note: For WPS operations on the client, see the user guide of the client.
15 Restoring Factory Defaults If you forget the changes you have made to some parameters, you may restore factory defaults and reconfigure the Mobile WiFi. To restore the factory defaults, press and hold the Reset button until the screen turns off. All factory default settings are successfully restored. Note: Restoring factory defaults deletes all personal configuration settings and restores all web-based management settings and parameters to their default values. Reset
16 Example 1: Wi-Fi Connection to Game Machine (Sony PSP) 1. Turn on the PSP WLAN switch. 2. Select Settings > Network Settings. 3. Select Infrastructure Mode to connect to your local Wi-Fi access point. 4. Select New Connection to specify an easy to remember connection name. 5. Select Scan to detect all networks within range. The access point list is displayed. 6. Select a network indicated by the SSID of the Mobile WiFi. First press the ► button of your game machine to confirm the SSID and then press it again to input the wireless network key.
17 7. Press the ► button of your game machine to continue, and then press the X button to save the settings. 8. Select Test Connection to check the connection. 9. Go to Internet Browser.
18 Example 2: Wi-Fi Connection to a Smart Phone (iPhone) 1. Select Settings > Wi-Fi, and then turn on Wi-Fi. 2. Automatically detect the networks in range and display the access point list. 3. Select a network indicated by the SSID of the Mobile WiFi. 4. If necessary, enter a password and tap Join. (Networks requiring a password appear with a lock icon.) Note: Some Wi-Fi clients such as iTouch, PS3 and NDSi can also access the Internet via the Mobile WiFi. For details, see the user guides of the Wi-Fi clients.
19 Tips If the Mobile WiFi is placed in an environment with poor ventilation, it may overheat after extended use. When the Mobile WiFi overheats, it will switch off and disconnect from the network automatically to protect itself. If this happens, place the Mobile WiFi in a well-ventilated location, then restart the Mobile WiFi. If you are experiencing difficulties using the Mobile WiFi, try the following:  Restart the Mobile WiFi.  Restore the factory defaults.  Contact your service provider. Version: V100R001_01 Part Number: 3101****

Navigation menu