Huawei Technologies E5776U-72 Mobile Cellular Device with GSM/GPRS/EDGE 1900, WCDMA/HSPA/DC-HSPA FDD II/V, CDMA EVDO BC0. User Manual QSG
Huawei Technologies Co.,Ltd Mobile Cellular Device with GSM/GPRS/EDGE 1900, WCDMA/HSPA/DC-HSPA FDD II/V, CDMA EVDO BC0. QSG
Contents
- 1. User Manual (QSG)
- 2. User Manual (SI)
- 3. User Manual (QSG
User Manual (QSG)
1
Thank you for choosing HUAWEI Mobile WiFi
Supported functions and actual appearance depend on the specific models you purchased.
The illustrations are provided for your reference only. For details about the model you
selected, consult your service provider.
This guide briefly describes the functions of the Mobile WiFi. For more details, see help on
the web management page.
Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE
ANY KIND OF WARRANTIES.
2
Getting to Know HUAWEI Mobile WiFi
Connection Scenario
A Wi-Fi device can be connected to the Internet through the Mobile WiFi. The actual
connection procedure depends on the operating system of the Wi-Fi device. The
connection scenario illustrated here is for your reference.
Scenario 1: Multi-device access via Wi-Fi Scenario 2: One-device access via USB
3
Scenario 3: Multi-device access via Wi-Fi and USB at the same time
4
Appearance
No. Item
1 Screen
2 Power button
3 micro-SIM card slot
4 Reset button
5 Strap hole
6
WPS button
Press and hold it until a WPS
activation animation is displayed
to enable the WPS function.
7 USB port
2
34
5 6 7
1
5
Screen
No. Item
1 Signal strength
2 Network
3 Battery level
4 Wi-Fi enabled
Number of devices connected
5 International roaming state
1
2
3
4
5
R
3G
6
SSID and Wireless Network Key
To connect a Wi-Fi device to your Mobile WiFi, an SSID and a wireless network key are
required. The default SSID and wireless network key can be found in the gift box.
Before You Start
Installing the micro-SIM Card
Caution: Do not use any micro-SIM card that is not standard or is incompatible with the
Mobile WiFi. Otherwise, the Mobile WiFi may be damaged.
1. Remove the rubber cap from the micro-SIM card slot. Then insert the micro-SIM card
into the slot. Be sure that the micro-SIM card is facing in the right direction.
2. After inserting the micro-SIM card completely, attach the rubber cap.
Note:
To remove the micro-SIM card, press in the card gently. The micro-SIM card will pop
7
out for removal.
Do not remove the micro-SIM card when the card is in use. Otherwise, the card as
well as your Mobile WiFi may get damaged and the data stored on the card may be
corrupted.
Charging the Battery
Charge your Mobile WiFi the first time you use it or if it has not been used for a long time.
Method 1: Using the charger
Caution:
Only use chargers compatible with the Mobile WiFi and
provided by a designated manufacturer (HW-050200U3W).
Use of an incompatible charger or one from an unknown manufacturer may cause the
Mobile WiFi to malfunction, fail, or could even cause a fire. Such use voids all
warranties, whether expressed or implied, on the product.
8
Method 2: Connecting to a PC for charging
Connect the Mobile WiFi to a PC using a compatible data cable.
9
Accessing the Internet via Wi-Fi Connection
By default, management parameters are preset on the Mobile WiFi according to the
requirements of the service provider. Follow the steps below to quickly access the Internet.
Step1: Power on the Mobile WiFi
Press and hold until the screen lights up.
The Mobile WiFi is powered on.
Note: Press and hold to power off the
Mobile WiFi.
10
Step2: Establish a Wi-Fi Connection (Take a computer with Windows XP
operating system as an example)
1. Make sure that the Wi-Fi is enabled.
2. Select Start > Control Panel > Network Connections > Wireless Network Connection.
Note: To set up a Wi-Fi connection, the PC must have a wireless network adapter installed.
If Wireless Network Connection is displayed, a wireless network adapter is available.
Otherwise, check to make sure you have a wireless network adapter installed.
3. Click View available wireless networks to display a list of wireless networks available.
4. Select a network indicated by the SSID of the Mobile WiFi, and then click Connect.
Note:If the encryption parameter is already set for the Mobile WiFi, the Wireless Network
Connection dialog box is displayed. Enter the wireless network key in the dialog box.
5. Wait until the wireless connection icon is displayed in the status area in the lower
right corner of the PC screen.
11
Step3: Access the Internet
After you establish a Wi-Fi connection successfully, you can access the Internet using the
following modes.
Caution: Please select a proper Internet connection mode based on your service expense.
For example, if you are subscribed to the time-based network service, you are
recommended to select Manual mode. For details about the service expense, consult your
service provider.
Mode Operations
Auto
After the Mobile WiFi is powered on, it will connect to the Internet
automatically. If there is no data transmission over a period of time, the
Mobile WiFi automatically terminates the Internet connection.
Manual Launch the web management page and follow the prompts to connect
to or disconnect from the network.
12
Note:
Launch the web management page to select the mode for accessing the Internet.
You can choose whether to enable the Mobile WiFi to connect to the Internet
automatically even while you are roaming. If this function is disabled, the Mobile WiFi
automatically disconnects from the Internet while you are roaming. To access the
Internet, set up a connection manually.
Accessing the Web Management Page
1. Make sure that the connection between the Mobile WiFi and the client is a proper
one.
2. Start the Internet browser and enter http://192.168.1.1 in the address bar.
3. Enter the password and log in to the web management page.
Note: The default password is admin.
13
Daily Use
Power Saving Mode
If no operation is performed on the Mobile WiFi within a preset period, the screen turns off.
Press any key to light up the screen.
If the Mobile WiFi is powered by the battery only, choose whether to enable the Mobile
WiFi to turn off Wi-Fi automatically. If this function is enabled and no Wi-Fi devices access
the Mobile WiFi for a preset period, the Mobile WiFi turns off Wi-Fi automatically. You can
press any key to turn on Wi-Fi again.
Validating the PIN Code
If PIN code protection is enabled, log in to the web management page and follow the
prompts to enter the correct PIN code. Both PIN and PUK are delivered with the SIM card.
For details, consult your service provider.
14
Establishing a WPS Connection
If a Wi-Fi client connected to the Mobile WiFi supports the WPS function, a wireless
network key will be automatically generated without manual input. To establish a WPS
connection, perform the following steps:
1. Power on the Mobile WiFi.
2. Start the client.
3. Enable the WPS function of the Mobile WiFi.
Note: After Wi-Fi is enabled, press and hold until a WPS
activation animation is displayed on the screen to enable the
WPS function of the Mobile WiFi.
4. Enable the WPS function of the client.
Note: For WPS operations on the client, see the user guide of
the client.
15
Restoring Factory Defaults
If you forget the changes you have made to some
parameters, you may restore factory defaults and
reconfigure the Mobile WiFi. To restore the factory
defaults, press and hold the Reset button until the screen
turns off. All factory default settings are successfully
restored.
Note: Restoring factory defaults deletes all personal
configuration settings and restores all web-based
management settings and parameters to their default
values.
Reset
16
Example 1: Wi-Fi Connection to Game Machine (Sony
PSP)
1. Turn on the PSP WLAN switch.
2. Select Settings > Network Settings.
3. Select Infrastructure Mode to connect
to your local Wi-Fi access point.
4. Select New Connection to specify an
easy to remember connection name.
5. Select Scan to detect all networks within
range. The access point list is displayed.
6. Select a network indicated by the SSID
of the Mobile WiFi. First press the ►
button of your game machine to
confirm the SSID and then press it again
to input the wireless network key.
17
7.
Press the
►
button of your game machine to continue, and then press the X button
to save the settings.
8.
Select Test Connection to check the connection.
9.
Go to Internet Browser.
18
Example 2: Wi-Fi Connection to a Smart Phone (iPhone)
1. Select Settings > Wi-Fi, and then turn on
Wi-Fi.
2. Automatically detect the networks in range
and display the access point list.
3. Select a network indicated by the SSID of the
Mobile WiFi.
4. If necessary, enter a password and tap Join.
(Networks requiring a password appear with
a lock icon.)
Note: Some Wi-Fi clients such as iTouch, PS3 and
NDSi can also access the Internet via the Mobile
WiFi. For details, see the user guides of the Wi-Fi
clients.
19
Tips
If the Mobile WiFi is placed in an environment with poor ventilation, it may overheat after
extended use. When the Mobile WiFi overheats, it will switch off and disconnect from the
network automatically to protect itself. If this happens, place the Mobile WiFi in a
well-ventilated location, then restart the Mobile WiFi.
If you are experiencing difficulties using the Mobile WiFi, try the following:
Restart the Mobile WiFi.
Restore the factory defaults.
Contact your service provider.
Version: V100R001_01 Part Number: 3101****
User Manual (QSG
1
Thank you for choosing HUAWEI Mobile WiFi
Supported functions and actual appearance depend on the specific models you purchased.
The illustrations are provided for your reference only. For details about the model you
selected, consult your service provider.
This guide briefly describes the functions of the Mobile WiFi. For more details, see help on
the web management page.
Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE
ANY KIND OF WARRANTIES.
2
Getting to Know HUAWEI Mobile WiFi
Connection Scenario
A Wi-Fi device can be connected to the Internet through the Mobile WiFi. The actual
connection procedure depends on the operating system of the Wi-Fi device. The
connection scenario illustrated here is for your reference.
Scenario 1: Multi-device access via Wi-Fi Scenario 2: One-device access via USB
3
Scenario 3: Multi-device access via Wi-Fi and USB at the same time
4
Appearance
No. Item
1 Screen
2 Power button
3 micro-SIM card slot
4 Reset button
5 Strap hole
6
WPS button
Press and hold it until a WPS
activation animation is displayed
to enable the WPS function.
7 USB port
2
34
5 6 7
1
5
Screen
No. Item
1 Signal strength
2 Network
3 Battery level
4 Wi-Fi enabled
Number of devices connected
5 International roaming state
1
2
3
4
5
R
3G
6
SSID and Wireless Network Key
To connect a Wi-Fi device to your Mobile WiFi, an SSID and a wireless network key are
required. The default SSID and wireless network key can be found in the gift box.
Before You Start
Installing the micro-SIM Card
Caution: Do not use any micro-SIM card that is not standard or is incompatible with the
Mobile WiFi. Otherwise, the Mobile WiFi may be damaged.
1. Remove the rubber cap from the micro-SIM card slot. Then insert the micro-SIM card
into the slot. Be sure that the micro-SIM card is facing in the right direction.
2. After inserting the micro-SIM card completely, attach the rubber cap.
Note:
To remove the micro-SIM card, press in the card gently. The micro-SIM card will pop
7
out for removal.
Do not remove the micro-SIM card when the card is in use. Otherwise, the card as
well as your Mobile WiFi may get damaged and the data stored on the card may be
corrupted.
Charging the Battery
Charge your Mobile WiFi the first time you use it or if it has not been used for a long time.
Method 1: Using the charger
Caution:
Only use chargers compatible with the Mobile WiFi and
provided by a designated manufacturer (HW-050200U3W).
Use of an incompatible charger or one from an unknown manufacturer may cause the
Mobile WiFi to malfunction, fail, or could even cause a fire. Such use voids all
warranties, whether expressed or implied, on the product.
8
Method 2: Connecting to a PC for charging
Connect the Mobile WiFi to a PC using a compatible data cable.
9
Accessing the Internet via Wi-Fi Connection
By default, management parameters are preset on the Mobile WiFi according to the
requirements of the service provider. Follow the steps below to quickly access the Internet.
Step1: Power on the Mobile WiFi
Press and hold until the screen lights up.
The Mobile WiFi is powered on.
Note: Press and hold to power off the
Mobile WiFi.
10
Step2: Establish a Wi-Fi Connection (Take a computer with Windows XP
operating system as an example)
1. Make sure that the Wi-Fi is enabled.
2. Select Start > Control Panel > Network Connections > Wireless Network Connection.
Note: To set up a Wi-Fi connection, the PC must have a wireless network adapter installed.
If Wireless Network Connection is displayed, a wireless network adapter is available.
Otherwise, check to make sure you have a wireless network adapter installed.
3. Click View available wireless networks to display a list of wireless networks available.
4. Select a network indicated by the SSID of the Mobile WiFi, and then click Connect.
Note:If the encryption parameter is already set for the Mobile WiFi, the Wireless Network
Connection dialog box is displayed. Enter the wireless network key in the dialog box.
5. Wait until the wireless connection icon is displayed in the status area in the lower
right corner of the PC screen.
11
Step3: Access the Internet
After you establish a Wi-Fi connection successfully, you can access the Internet using the
following modes.
Caution: Please select a proper Internet connection mode based on your service expense.
For example, if you are subscribed to the time-based network service, you are
recommended to select Manual mode. For details about the service expense, consult your
service provider.
Mode Operations
Auto
After the Mobile WiFi is powered on, it will connect to the Internet
automatically. If there is no data transmission over a period of time, the
Mobile WiFi automatically terminates the Internet connection.
Manual Launch the web management page and follow the prompts to connect
to or disconnect from the network.
12
Note:
Launch the web management page to select the mode for accessing the Internet.
You can choose whether to enable the Mobile WiFi to connect to the Internet
automatically even while you are roaming. If this function is disabled, the Mobile WiFi
automatically disconnects from the Internet while you are roaming. To access the
Internet, set up a connection manually.
Accessing the Web Management Page
1. Make sure that the connection between the Mobile WiFi and the client is a proper
one.
2. Start the Internet browser and enter http://192.168.1.1 in the address bar.
3. Enter the password and log in to the web management page.
Note: The default password is admin.
13
Daily Use
Power Saving Mode
If no operation is performed on the Mobile WiFi within a preset period, the screen turns off.
Press any key to light up the screen.
If the Mobile WiFi is powered by the battery only, choose whether to enable the Mobile
WiFi to turn off Wi-Fi automatically. If this function is enabled and no Wi-Fi devices access
the Mobile WiFi for a preset period, the Mobile WiFi turns off Wi-Fi automatically. You can
press any key to turn on Wi-Fi again.
Validating the PIN Code
If PIN code protection is enabled, log in to the web management page and follow the
prompts to enter the correct PIN code. Both PIN and PUK are delivered with the SIM card.
For details, consult your service provider.
14
Establishing a WPS Connection
If a Wi-Fi client connected to the Mobile WiFi supports the WPS function, a wireless
network key will be automatically generated without manual input. To establish a WPS
connection, perform the following steps:
1. Power on the Mobile WiFi.
2. Start the client.
3. Enable the WPS function of the Mobile WiFi.
Note: After Wi-Fi is enabled, press and hold until a WPS
activation animation is displayed on the screen to enable the
WPS function of the Mobile WiFi.
4. Enable the WPS function of the client.
Note: For WPS operations on the client, see the user guide of
the client.
15
Restoring Factory Defaults
If you forget the changes you have made to some
parameters, you may restore factory defaults and
reconfigure the Mobile WiFi. To restore the factory
defaults, press and hold the Reset button until the screen
turns off. All factory default settings are successfully
restored.
Note: Restoring factory defaults deletes all personal
configuration settings and restores all web-based
management settings and parameters to their default
values.
Reset
16
Example 1: Wi-Fi Connection to Game Machine (Sony
PSP)
1. Turn on the PSP WLAN switch.
2. Select Settings > Network Settings.
3. Select Infrastructure Mode to connect
to your local Wi-Fi access point.
4. Select New Connection to specify an
easy to remember connection name.
5. Select Scan to detect all networks within
range. The access point list is displayed.
6. Select a network indicated by the SSID
of the Mobile WiFi. First press the ►
button of your game machine to
confirm the SSID and then press it again
to input the wireless network key.
17
7.
Press the
►
button of your game machine to continue, and then press the X button
to save the settings.
8.
Select Test Connection to check the connection.
9.
Go to Internet Browser.
18
Example 2: Wi-Fi Connection to a Smart Phone (iPhone)
1. Select Settings > Wi-Fi, and then turn on
Wi-Fi.
2. Automatically detect the networks in range
and display the access point list.
3. Select a network indicated by the SSID of the
Mobile WiFi.
4. If necessary, enter a password and tap Join.
(Networks requiring a password appear with
a lock icon.)
Note: Some Wi-Fi clients such as iTouch, PS3 and
NDSi can also access the Internet via the Mobile
WiFi. For details, see the user guides of the Wi-Fi
clients.
19
Tips
If the Mobile WiFi is placed in an environment with poor ventilation, it may overheat after
extended use. When the Mobile WiFi overheats, it will switch off and disconnect from the
network automatically to protect itself. If this happens, place the Mobile WiFi in a
well-ventilated location, then restart the Mobile WiFi.
If you are experiencing difficulties using the Mobile WiFi, try the following:
Restart the Mobile WiFi.
Restore the factory defaults.
Contact your service provider.
Version: V100R001_01 Part Number: 3101****