Huawei Technologies EA380-135 LTE CPE User Manual 1

Huawei Technologies Co.,Ltd LTE CPE 1

Contents

Users Manual_Quick Installation Guide

CPE eA380 HUAWEI TECHNOLOGIES CO., LTD. Quick Installation Guide
Install the CPE eA380（Mounting on a Utility Pole） Insert the SIM card. 1 The installation is complete. 3-a Loosen the bolt of hose clamps. 3-b Adjust the length of the hose clamps. 3-c Fasten the bolt of hose clamps to fix the length of the hose clamp. 3-d Use the M6 hex key to tighten the bolt and fix the hose clamps completely. Install the hose clamps on the utility pole and adjust the length of the hose and fix it. 1-a Loosen the screws on the SIM card cover. 1-b Open the SIM card cover. 1-c Insert the SIM card. 1-d Close the SIM card cover and fasten the screws. Insert the two hose clamps into the sheet-metal mounting bracket. Note: When fastening the SIM card cover, press the rubber washer into the slot to avoid that it is exposed.
Install the CPE eA380（Mounting on the Wall） Insert the SIM card. Mark the fixing points. Install the expansion bolt. Fix the wall-mounting frame to the wall. Fix the eA380 on the wall-mounting frame. 2 Remove the sheet-metal mounting Bracket and install the wall mounting frame. 1-a Loosen the screws on the SIM card cover. 1-b Open the SIM card cover. 1-c Insert the SIM card. 1-d Close the SIM card cover and fasten the screws. Note: When fastening the SIM card cover, press the rubber washer into the slot to avoid that it is exposed.
Huawei Technologies Co., Ltd. Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support_e@huawei.com Customer Service Tel: 4008229999 Issue: 01 Part number: 31010WQX
3 Install the POE Network Cable For more details, please refer to “eA380 Series CPE User Guide”. You can download the eA380 Series CPE User Guide in the following path of http://support.huawei.com/enterprise : Product Support > Enterprise Wireless > eLTE Broadband > eLTE Broadband Terminal. Install the Cables of CPE eA380 Strip the cable Strip the PET Cut the unnecessary rip-cord Distribute the wires Assemble the ferrules and cut the surplus cables Insert the network cable into the crystal connector. Use the crimping tool to press the crystal connector Notice：Donot press the outer-jacket into the crystal connector. Make the POE Network Cable
Following All Safety Precautions Before any operation, read the instructions and precautions in this document carefully to minimize the possibility of accidents. The Danger, Caution, and Note items in the documents do not cover all the safety precautions that must be followed. They only provide the generic safety precautions for operations. When operating Huawei products and equipment, you must comply with safety precautions and special safety instructions related to the equipment provided by Huawei. The safety precautions in the document are related to only Huawei products. Huawei is not liable for any consequence that results from the violation of universal regulations for safety operations and safety codes on design, production, and equipment use. Complying with the Local Safety Regulations When operating the device, comply with the local safety regulations. Qualified Personnel Only The installation and maintenance personnel of Huawei equipment must be trained and master the correct operating methods and safety precautions before beginning work. Safety of Personnel •The AC power supply provides power for running the system. Direct contact with the high voltage power supply or contact through damp objects may result in serious injury. •In a thunderstorm, do not perform operations on high voltage and AC power supply facilities or on a steel tower and mast. •Power off the device before performing operations on the power supply equipment. •Protect yourself when drilling holes. Flying dust may hurt your eyes or you may inhale the dust. •When working at a height, be cautious about falling objects. Device Safety •Leave space around the device for heat dissipation. Keep the device away from heat and fire, for example, electric heaters and candles. •Do not disassemble the device. When the device has a fault, contact the operator. •Ensure that the device is always kept in a dry environment. If any liquid leaks through the device, power off the device and contact the operator. •If you detect smoke, unusual sound, or smell emanating from the device, unplug the device immediately. •Power off the device during thunder and lightning. •Do not hang anything on the power cable or plug. Do not cover the device. •Before cleaning the device, unplug it. Use a soft, dry cloth to clean the device exterior. •Ensure that the power plug is clean and dry. Do not use a damaged or aged power cable. •Power on an CPE within 24 hours after unpacking it. If you power off an CPE for maintenance, restore power to the CPE within 24 hours. •To avoid direct lightning, CPE must be installed in the protection angle of 45 degrees below a separate lightning rod, or protection angle of 45 degrees below a surrounding high-rise building. ■ ■ ■ ■ ■ ■ Safety Information 4 Environmental protection This product complies with the design requirements for environmental protection. The storage, use, and placement of the product must follow national laws and regulations. ■ Privacy Policy To better understand how we protect your personal information, please see the privacy policy at http://consumer.huawei.com/privacy-policy.

Navigation menu