Huawei Technologies EC5072 3G/4G Dual Mode Wireless Router User Manual Router si

Huawei Technologies Co.,Ltd 3G/4G Dual Mode Wireless Router Router si

UserManual.wiki >

Huawei Technologies >

EC5072 User Manual >

Contents

1. User Manual 1
2. User Manual 2

User Manual 1

Sprint UG_032511

iiNoticeSome features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers. Thus the descriptions herein may not exactly match the product or its accessories you purchase.Sprint reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation.NO WARRANTYTHE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL.TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL SPRINT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.Import and Export RegulationsCustomers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein.

Section 1Getting Started

2 1A. Setting Up ServiceࡗSetting Up Your Router (page 2)ࡗActivating Your Router (page 3)ࡗSprint Account Passwords (page 3) ࡗGetting Help (page 4)Setting Up Your Router1. Remove the back cover.ⅢSimply slide the cover down (in the direction of the arrow in Figure A). You may hear a click sound.2. Install the battery.ⅢRemove the battery from its packaging.ⅢAs shown in Figure B, Insert the battery into the opening in the back of the router, making sure the connectors align, and gently press down to secure the battery.3. Install the back cover onto your router.ⅢPlace the back cover on the back of the router, then slide up (in the direction of the arrow in Figure C). You may hear a pop sound. 4. Press on the right side of the router for about 3 seconds to turn the router on. ⅢIf your router is activated, it will turn on, search for Sprint service, and ready for Internet connection. ⅢIf your router is not yet activated, see “Activating Your Router” on page 3 for more information.5. Make your first wireless connection with a wireless client through Wi-Fi. ⅢDouble press on the right side of the router, the Wi-Fi SSID and the key of the router displays 1A. Setting Up ServiceFigure A Figure B Figure C

1A. Setting Up Service 3Setting Up Serviceon the screen for about five seconds. Take down the SSID and the network key.ⅢFrom a wireless client such as a PC on which a wireless network adapter is installed, seach for the wirelss network of the router which is named with the SSID you have taken down.ⅢConnect the wireless client to the Wireless network of the router with the key you have taken down.Activating Your Router ⅷIf you purchased your router at a Sprint Store, it is probably activated and ready to use.ⅷIf you received your router in the mail and it is for a new Sprint account or a new line of service, it is designed to activate automatically. To confirm your activation, make a wireless connection with a wireless client.ⅷIf you received your router in the mail and you are activating a new router for an existing number on your account, you will need to go online to activate your new router.ⅢFrom your computer’s Web browser, go to www.sprint.com/activate and complete the onscreen instructions to activate your router.When you have finished, make a wireless connection with a wireless client to confirm your activation. If your router is still not activated or you do not have access to the Internet, contact Sprint Customer Service at 1-888-211-4727 for assistance.Sprint Account PasswordsAs a Sprint customer, you enjoy unlimited access to your personal account information and your data services account. To ensure that no one else has access to your information, you will need to create passwords to protect your privacy.Note: You should fully charge the battery before attempting to set up any connections. See “Charging the Battery” on page 13 for details.Tip: Do not press while the router is being activated. Pressing cancels the activation process.Note: If you are having difficulty with activation, contact Sprint Customer Service by dialing 1-888-211-4727 for assistance.

4 1A. Setting Up ServiceAccount Username and PasswordIf you are the account owner, you will create an account username and password when you sign on to www.sprint.com. (Click Sign in and then click Sign up now! to get started.) If you are not the account owner (if someone else receives the bill for your Sprint service), you can get a sub-account password at www.sprint.com.Data Services PasswordWith your Sprint router, you may elect to set up an optional data services password to control access and authorize Premium Service purchases.For more information, or to change your passwords, sign on to www.sprint.com or call Sprint Customer Service at 1-888-211-4727.Getting HelpManaging Your AccountOnline: www.sprint.comⅷAccess your account information.ⅷCheck your minutes used (depending on your Sprint service plan).ⅷView and pay your bill.ⅷEnroll in Sprint online billing and automatic payment.ⅷPurchase accessories.ⅷShop for the latest Sprint phones.ⅷView available Sprint service plans and options.ⅷLearn more about data services and other products.From A PhoneⅷSprint Customer Service: 1-888-211-4727.ⅷBusiness Customer Service: 1-800-927-2199.For more information or to see the latest in products and services, visit us online at www.sprint.com.

Section 2Your Router

6 2A. Router BasicsࡗPackage Contents (page 6)ࡗYour Router (page 6)ࡗKey Functions (page 8)Package ContentsCheck the following items in the product package:Your RouterWith embedded modules including Wi-Fi access points, 3G (CDMA 1X/EVDO) modem, 4G (WiMAX) modem, and routing hardware handling traffic between the 3G/4G networks, the Wi-Fi access points and the Wi-Fi network, your router provides a simple way for 3G/4G Internet connection with mutiple (up to five) Wi-Fi supported devices.2A. Router Basics13G/4G Dual Mode Wireless Router2Battery Charger3USB Cable4Battery5Getting Started Poster6Important Information BookletNote: Please contact the Sprint store where you purchased your router if any items are missing or damaged when you first open the package. And note that the figures in this guide are provided only for reference, see the actual product for details.

2A. Router Basics 7Phone BasicsFront OverviewRear OverviewNote: Generally, the 3G/4G Dual Mode Wireless Router will be referred to as "the router" in this guide.1Display screen2Micro USB port3WLAN button4Power button5Strap hole6Back cover7Battery compartment8Reset button9MicroSDTM card slot

8 2A. Router BasicsKey Functions 1. Display screen provide information about your router’s status.Tip: If the display screen is off while the router is on, you can press any button to turn on it.2. Micro USB port allows you to connect the router charger or a compatible PC through the USB cable for charging the battery. CAUTION! Inserting an incorrect accessory into the port may damage the router.3. WLAN button When the router is on: ●Double press the WLAN button to display the SSID and key of the wireless network on the display screen.●Press and hold the WLAN button for about two seconds to disable or enable the WLAN feature.●Press and hold the WLAN button for about five seconds or more to start a WPS negotiation.4. Power button ●When the router is off, press and hold the power button for about 3 s to turn on it.●When the router is on, press and hold the power button for about 3 s to turn off it.5. Strap hole allows you to thread a strap to the router through the strap holes for more portable.6. Battery slot allows you to install the battery. CAUTION! Inserting an incorrect accessory into the slot may damage the router.7. Reset button ●press and hold the Reset button for less than 5 s to restore the default settings of WLAN.●press and hold the Reset button for 5 s or more than 5 s to retore the default settings or the device.8. MicroSDTM card slot allows you to install a microSDTM card. CAUTION! Inserting an incorrect accessory into the slot may damage the router.

2A. Router Basics 9Phone Basics

10 2A. Installing and StartupࡗRemoving or Installing the Back Cover (page 10)ࡗInstalling or Removing the Battery (page 10)ࡗInstalling or Removing a MicroSDTM card (optional) (page 7)ࡗ (page 11)ࡗTurning Your Router On or Off (page 13)ࡗChecking the status of the router via the screen (page 14)Removing or Installing the Back CoverTo remove the back cover, simply slide the cover down (in the direction of the arrow in Figure A). You may hear a click sound.To install the back cover onto your router, place it on the back of the router, then slide up (in the direction of the arrow in Figure B). You may hear a pop sound. Installing or Removing the BatteryTo install the battery, gently insert the battery into the battery slot on the back of the router, making sure the connectors align, and gently press down to secure the battery (as shown in Diagram A).To remove the battery, make sure the power is off so that you don’t lose any data, and then press the battery release latch up (in the direction of the arrows in Diagram B) and remove the battery from the router.2A. Installing and StartupWARNING: Do not handle a damaged or leaking Li-Ion battery as you can be burned.Figure A Figure B

2A. Installing and Startup 11Setting Up ServiceInstalling or Removing a MicroSDTM card (optional)Your router supports a microSD™ card (sold separately) up to 32 GB for file sharing and transfer or storage. When connected to a computer through the usb cable, the microSD card is recognized as a removable storage device.To install a microSDTM card, gently insert the card into the microSDTM card slot on the back of the router, making sure the side with the metal contacts face to the back of the router (as shown in Figure A).To remove the microSDTM card, slightly push in on it to release it, and then remove it from the router (as shown in Figure B).Charging the BatterySprint-approved or [manufacturer]-approved batteries and accessories can be found at Sprint Stores or WARNING: Before installing or removing a microSDTM card, power off the router to protect the router and the SD card from being damaged.Diagram A Diagram BWARNING: Using microSD cards larger than 32 GB may cause data loss and damage your device.WARNING: Use only Sprint-approved or [manufacturer]-approved batteries and chargers with your router. The failure to use a Sprint-approved or [manufacturer]-approved battery and charger may increase the risk that your router will overheat, catch fire, or explode, resulting in serious bodily injury, death, or property damage.Figure A Figure B

12 2A. Installing and Startupthrough [manufacturer]; or call 1-866-866-7509 to order. They’re also available at www.sprint.com.Battery CapacityYour router is equipped with a Lithium Ion (Li-Ion) battery. It allows you to recharge your battery before it is fully drained. The battery provides up to four hours of continuous data-transferring time.When the battery reaches 5% of its capacity, the battery icon blinks. When there are approximately two minutes of data-transferring time left, the router turns off.Charging the BatteryKeeping track of your battery’s charge is important. If your battery level becomes too low, your phone automatically turns off, and you will lose any information you were just working on. To charge the battery installed on the router, plug the USB end (The larger) of USB cable into the router’s micro USB port, and the other end into an electrical outlet (as shown in Figure A) or an USB port of a compatible PC with the power is on (as shown in Figure B).ⅢCharging the battery while the router is on, the battery icon on the display screen changes dynamically and repeatedly in incremental sequence from the right to the left until the battery is fully charged.ⅢCharging the battery while the router is off, the charging animation on the display screen changes dynamically and repeatedly until the charging is over. Note: Long backlight settings, searching for service and other variables may reduce the battery’s data-transferring and standby times.Tip: Watch your router’s battery level indicator and charge the battery before it runs out of power.Note: Charging through a computer usually takes longer than charging through the battery charger.Figure A Figure B

2A. Installing and Startup 13Setting Up ServiceWith the Sprint-approved Li-Ion battery, you can recharge the battery before it becomes completely run down.Turning Your Router On or OffTo turn the router on or off, press and hold the power button for about three seconds until you see the powering-on or powering-down animation on the display screen.Once your router is on, it searches for the service. When the router finds a signal, you are ready to begin making connections with other Wi-Fi devices.If your router is unable to find a signal after searching of 10 minutes by default or the period you have set , a Power Save feature is automatically activated. In Power Save mode, your router searches for a signal periodically without your intervention. You can also initiate a search for Sprint service by pressing any key (When your router is turned on).Your screen remains blank while your router is off (unless the battery is charging).Note: Before turn on the router, make sure the router has a charged or charging battery installed.Tip: The Power Save feature conserves your battery power when you are in an area where there is no signal.

14 2A. Installing and StartupChecking the status of the router via the screen1Signal Strength – The current signal strength of the network. (More bars = stronger signal.)23G or 4G status– Your current network is in 3G mode or in 4G mode.3Wi-Fi On – Your router’s wireless feature is on.4Clients – The number of currently connected client Wi-Fi devices (including 0,1,2,3,4,5).5Location On – Your router’s location feature is on and available for location-based services such as GPS Navigation.6Internet – You are connected to the Internet.7Battery Status – The current battery charge level. When charging, the icon is animated.8Throughput – The amount of the data transferred of the current connection.9Duration – Duration of the current connection.10 Roaming – Your router is “roaming” off the Nationwide Sprint Network.

Section 6Safety and WarrantyInformation

16 4A. Important Safety InformationࡗGeneral Precautions (page 16)ࡗEnvironmental Requirements (page 17)ࡗPrecautions for Using Wireless Devices (page 17) ࡗAreas with Inflammables and Explosives (page 18)ࡗAccessory Requirements (page 18)ࡗBattery and Charger (page 19)ࡗSafety of Children (page 20)ࡗTraffic Security (page 21)ࡗTraffic Security (page 21)ࡗEnvironmental Protection (page 22)ࡗSpecific Absorption Rates (SAR) (page 22)ࡗBody-Worn Operation (page 22)ࡗFederal Communications Commission (FCC) Notice (page 23)This guide contains important operational and safety information that will help you safely use the router. Failure to read and follow the information provided in this guide may result in serious bodily injury, death, or property damage.General PrecautionsⅷDuring storage, transportation, and operation of the router, keep it dry and prevent it from colliding with other objects.ⅷDo not dismantle the router. In case of any fault, contact an authorized service center for assistance or repair.ⅷWithout authorization, no organization or individual can change the mechanical, safety, or performance design of the router.ⅷWhen using the router, observe all applicable laws and regulations and respect the legal rights of other people.ⅷAlthough the router is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting, bending, or sitting on it. 4A. Important Safety Information Note: Unless otherwise specified, the term "device" refers to the device and its accessories.

4A. Important Safety Information 17Important Safety InformationⅷAny changes or modifications to the router not expressly approved in this guide could void your warranty for this router and void your authority to operate this router. Environmental RequirementsⅷKeep the router far from sources of heat and fire, such as a heater or a candle.ⅷKeep the router far from electronic appliances that generate strong magnetic or electric fields, such as a microwave oven or a refrigerator.ⅷPlace the router on a stable surface.ⅷPlace the router in a cool and well-ventilated indoor area. Do not expose the device to direct sunlight for extended periods of time (such as on the dashboard of a car). ⅷKeep the ambient temperature between 32° F (0° C ) and 113° F (45° C) while the router battery is being charged. Keep the ambient temperature between 32° F (0° C ) and 104° F (40° C) for using the router powered by a battery.ⅷDo not use or charge the router in dusty, damp, and dirty places. Otherwise, it may result in a malfunction of the circuit.ⅷDo not block the openings on the router with any object. Reserve a minimum space of 10 cm around the router for heat dissipation.ⅷAvoid exposing the router and accessories to rain or liquid spills. If the router does get wet, immediately turn the power off and remove the battery, remove all the cables connected to it, and then contact an authorized service center.ⅷDuring thunderstorms, power off the router, and then remove all the cables connected to it to prevent it from getting damaged due to lightning strikes.Precautions for Using Wireless DevicesⅷTo operate the router safely and efficiently, always follow any special regulations in a given area. Turn the power off in areas where use is forbidden or when it may cause interference or danger.

18 4A. Important Safety InformationⅷThe radio waves generated by the router may interfere with the operation of other electronic devices. Before using any electrical medical device, consult its manufacturer for the restrictions on the use of the router.ⅷDo not take the router into operating rooms, intensive care units (ICUs), or coronary care units (CCUs).Areas with Inflammables and ExplosivesⅷTurn the router off when you are in any area that has a potentially inflammable or explosive atmosphere. Although it is rare, the router and accessories could generate sparks. Sparks can cause an explosion or fire, resulting in bodily injury or even death. These areas are often, but not always, clearly marked. They include:ⅢFueling areas such as gas stations oil depots, or chemical plants.ⅢBelow deck on boats.ⅢFuel or chemical transfer or storage facilities.ⅢAreas where the air contains chemicals or particles such as grain, dust, or metal powders.ⅢAny other area where you would normally be advised to turn off your vehicle’s engine.ⅷNever transport or store flammable gas, flammable liquids, or explosives in the compartment of your vehicle that contains the router or accessories.Accessory RequirementsⅷUse only the accessories supplied or authorized by the router manufacturer for using with this router model. Otherwise, the performance of the router may get affected, the warranty for the router or the laws Note: Always turn off the router in healthcare facilities, and request permission before using the router near medical equipment.Important: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instruction as documented in this manual.

4A. Important Safety Information 19Important Safety Informationand regulations related to telecommunications terminals may become null and void, or an injury may occur.ⅷDo not use the accessories if they are damaged. Otherwise, electric shocks or fires may occur.For pluggable device, the socket-outlet shall be installed near the router and shall be easily accessible.Battery and ChargerⅷThe power supply must be a Limited Power Source in accordance with the requirements of IEC 60950-1/EN 60950-1, Clause 2.5. It must be tested and approved to national or local standards.ⅷUse the AC power supply defined in the specifications of the charger. An improper power voltage may cause a fire or a malfunction of the charger.ⅷUse the compatible battery and charger delivered only by the manufacturer with this router model. Using battery and charger of other device model, other manufacturers or vendors may invalidate any approval or warranty applicable to the router, result in the non-operation of the router, and cause danger.ⅷUnplug the charger from the electrical plug and the router when not in use.ⅷIf the power cable is damaged (for example, the cord is exposed or broken), or the plug loosens, stop using the cable at once. Otherwise, it may lead to an electric shock, a short circuit of the charger, or a fire.ⅷDo not use the battery charger in direct sunlight or in high humidity areas, such as the bathroom.ⅷIn order to avoid damage, charge the battery only in temperatures that range from 32° F to 113° F (0° C to 45° C).ⅷDo not connect two poles of the battery with conductors, such as metal materials, keys, or jewelries. Otherwise, the battery may be short-circuited and may cause injuries and burns on your body.ⅷKeep the metal contacts on top of the battery clean.ⅷDo not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, as any damage to the battery may result in a fire, explosion or other hazard.

20 4A. Important Safety InformationⅷAvoid dropping the router or battery. If the router or battery is dropped, especially on a hard surface, and the user suspects damage, take it to a qualified service center for inspection.ⅷDo not disassemble the battery or solder the battery poles. Otherwise, it may lead to electrolyte leakage, overheating, fire, or explosion.ⅷIf battery electrolyte leaks out, ensure that the electrolyte does not touch your skin and eyes. When the electrolyte touches your skin or splashes into your eyes, wash your eyes with clean water immediately and consult a doctor.ⅷIf there is a case of battery deformation, color change, or abnormal heating while you charge or store the battery, remove the battery immediately and stop using it. Otherwise, it may lead to battery leakage, overheating, explosion, or fire.ⅷThe battery can be charged and discharged hundreds of times before it eventually wears out. When the standby time and the data-transferring time are shorter than the normal time, replace the battery. Danger of explosion if battery is incorrectly replaced. ⅷNew batteries or batteries stored for a long time may take more time to charge. When charging your battery, keep it near room temperature. When storing your battery, keep it uncharged in a cool, dark, dry place. Some batteries perform best after several full charge and discharge cycles.ⅷDo not store the battery in high temperature areas for long periods of time. Leaving the battery in a hot vehicle may degrade long-term performance of Li-lon batteries. It is best to store the battery in temperatures that range from 32° F to 104° F (0° C to 40° C).ⅷBe sure to recycle or dispose of used batteries in accordance with local regulations or reference instruction supplied with your router. In some areas, the disposal of batteries in household or business trash may be prohibited.Safety of ChildrenThe router is not a toy. Do not allow children to play with the router and keep the router and its accessories out of the reach of children. Otherwise, they may damage the router and its accessories, hurt themselves

4A. Important Safety Information 21Important Safety Informationor others by mistake, or they may swallow the small components of the router, causing suffocation or other dangerous situations.Traffic SecurityⅷObserve local laws and regulations while using the router. To prevent accidents, do not use the router while driving. Remember that safety always comes first.ⅷRF signals may affect electronic systems of motor vehicles. For more information, consult the vehicle manufacturer.ⅷIn a motor vehicle, do not place the router over the air bag or in the air bag deployment area. Otherwise, the router may hurt you owing to the strong force when the air bag inflates.ⅷKeep the router off while flying in an aircraft and before boarding an aircraft. Using wireless devices in an aircraft may cause danger to the operation of the aircraft and disrupt the wireless telephone network. It may also be considered illegal. MaintenanceⅷIf the router is not used for a long time, power it off, and then remove all the cables connected to it.ⅷThe router and its accessories are not water-resistant. Keep them dry and protect the them from water or vapor. Do not touch the router or the charger with a wet hand. Otherwise, it may lead to a short circuit, a malfunction of the router, and an electric shock to the user.ⅷIf any exception occurs, for example, if the router emits any smoke or unusual sound or smell, stop using the router immediately, power it off, remove all the cables connected to it, and then contact an authorized service center.ⅷDo not trample, pull, or overbend any cable. Otherwise, the cable may get damaged, causing malfunction of the device.ⅷBefore cleaning the router, power it off, and then remove all the cables connected to it.ⅷUse a clean, soft, and dry cloth to clean the router shell, and do not use any cleaning agent or spray.

22 4A. Important Safety InformationEnvironmental ProtectionⅷDo not dispose of the router and the accessories in a garbage can.ⅷDispose of the router according to the local regulations on disposing of packing materials, exhausted batteries and abandoned devices, and support the recycling activity.Specific Absorption Rates (SAR)This router meets guidelines for exposure to radio waves.This router is a low-power radio transmitter and receiver. As recommended by international guidelines, the router is designed not to exceed the limits for exposure to radio waves. These guidelines were developed by the independent scientific organization International Commission on Non-Ionizing Radiation Protection (ICNIRP) and include safety measures designed to ensure safety for all users, regardless of age and health.The Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio frequency energy absorbed by the body when using a device. The SAR value is determined at the highest certified power level in laboratory conditions, but the actual SAR level of the device when being operated can be well below the value. This is because the router is designed to use the minimum power required to reach the network.The SAR limit adopted by USA and Canada is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The highest SAR value reported to the FCC and IC for this device type when tested for use in portable exposure conditions are as follows:WLAN 0.00341W/kgCDMA 0.813W/kgWiMAX 0.715W/kgBody-Worn OperationImportant safety information regarding radiofrequency (RF) radiation exposure is as follows:ⅷTo ensure compliance with RF exposure guidelines, the device must be used with a minimum of 1 cm (0.393 inches) distance from the body.

4A. Important Safety Information 23Important Safety InformationⅷFailure to observe the instructions could result in your RF exposure exceeding the relevant guideline limits.For more information about RF exposure, visit the FCC website at www.fcc.gov. Federal Communications Commission (FCC) NoticeFCC ID number: QISEC5072This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:ⅷReorient the direction of the internal antenna.ⅷIncrease the separation between the equipment and receiver.ⅷConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.ⅷConsult the dealer or an experienced radio/TV technician for help.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

24 4A. Important Safety Information

12 MONTH LIMITED WARRANTY 25Warrantyࡗ12 MONTH LIMITED WARRANTY (page 25)Your router has been designed to provide you with reliable, worry-free service. If for any reason you have a problem with the device, please refer to the manufacturer’s warranty in this section.For information regarding the terms and conditions of service for your router, please visit www.sprint.com or call Sprint Customer Service at 1-888-211-4727.12 MONTH LIMITED WARRANTYPersonal Communications Devices, LLC. (the “Company”) warrants to the original retail purchaser of this portable wireless router, that should this product or any part thereof during normal consumer usage and conditions, be proven defective in material or workmanship that results in product failure within the first twelve (12) month period from the date of purchase, such defect(s) will be repaired or replaced (with new or rebuilt parts) at the Company’s option, without charge for parts or labor directly related to the defect(s).The rechargeable battery and battery charger, if included, are similarly warranted for twelve (12) months from date of purchase. This Warranty extends only to consumers who purchase the product in the United States or Canada and it is not transferable or assignable.This Warranty does not apply to:ⅷ(a)Product subjected to abnormal use or conditions, accident, mishandling, neglect, unauthorized alteration, misuse, improper installation or repair or improper storage;Note: In addition to the warranty provided by your router’s manufacturer, which is detailed on the following pages, Sprint offers a number of optional plans to cover your device for non-warranty claims. Sprint Total Equipment Protection provides the combined coverage of the Sprint Equipment Replacement Program and the Sprint Equipment Service and Repair Program, both of which are available separately. Each of these programs may be signed up for within 30 days of activating your router. For more details, please visit your nearest Sprint Store or call Sprint at 1-800-584-3666.4B. Manufacturer’s Warranty

26 12 MONTH LIMITED WARRANTYⅷ(b)Product whose mechanical serial number or electronic serial number has been removed, altered or defaced.ⅷ(c)Damage from exposure to moisture, humidity, excessive temperatures or extreme environmental conditions;ⅷ(d)Damage resulting from connection to, or use of any accessory or other product not approved or authorized by the Company;ⅷ(e)Defects in appearance, cosmetic, decorative or structural items such as framing and non-operative parts;ⅷ(f)Product damaged from external causes such as fire, flooding, dirt, sand, weather conditions, battery leakage, blown fuse, theft or improper usage of any electrical source.The Company disclaims liability for removal or reinstallation of the product, for geographic coverage, for inadequate signal reception by the antenna or for communications range or operation of the cellular system as a whole.When sending your wireless device to Personal Communications Devices for repair or service, please note that any personal data or software stored on the device may be inadvertently erased or altered. Therefore, we strongly recommend you make a back up copy of all data and software contained on your device before submitting it for repair or service. This includes all contact lists and any other data added to your device. In addition, if your wireless device utilizes a microSDTM card, please remove the card before submitting the device and store for later use when your device is returned, Personal Communications Devices is not responsible for and does not guarantee restoration of any personal information or memory data contained in, stored on, or integrated with any wireless device, whether under warranty or not, returned to Personal Communications Devices for repair or service.To obtain repairs or replacement within the terms of this Warranty, the product should be delivered with proof of Warranty coverage (e.g. dated bill of sale), the consumer’s return address, daytime phone number and/or fax number and complete description of the problem, transportation prepaid, to the Company at the address shown below or to the place of purchase for repair or replacement processing. In addition, for reference to an authorized Warranty station in your

12 MONTH LIMITED WARRANTY 27Warrantyarea, you may telephone in the United States (800) 229-1235, and in Canada (800) 465-9672 (in Ontario call 416-695-3060).THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LAIBILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY MUST BE BROUGHT WITHIN A PERIOD OF 18 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR AN SPECIAL CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. THE COMPANY SHALL NOT BE LIABLE FOR THE DELAY IN RENDERING SERVICE UNDER THIS WARRANTY OR LOSS OF USE DURING THE TIME THE PRODUCT IS BEING REPAIRED OR REPLACED.No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.Some states or provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitation or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may also have other rights, which vary from state to state or province to province.IN USA: Personal Communications Devices, LLC.555 Wireless Blvd.Hauppauge, NY 11788(800) 229-1235IN CANADA: PCD Communications Canada Ltd.5535 Eglinton Avenue WestSuite# 234Toronto, ON M9C 5K5(800) 465-9672

Navigation menu