Huawei Technologies FT3310 Fixed wireless terminal User Manual Wonderful Communication Mobile Life

Huawei Technologies Co.,Ltd Fixed wireless terminal Wonderful Communication Mobile Life

User manual

onderful Communication, Mobile Life. hank you for choosing HUAWEI FT3310 Fixed Wireless Terminal. 3310 Fixed Wireless Terminal ser Guide W T HUAWEI FTU
m or by any means pplicable laws or opyright holders under licenses. PermissioCopyright © Huawei Technologies Co., Ltd. 2009. All rights reserved. No part of this document may be reproduced or transmitted in any forwithout prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by asuch actions are approved by respective cTrademarks and ns , HUAWEI, and are trademarks or registered trademarks of Huawei Technologies roduct, service and company names mentioned are the property of their owners. the descriptions y information or d in this manual without prior notice or obligation. ATION TO THE ACCURACY, RELIABILITY OR PROFITS, ILL OR ANTICIPATED SAVINGS. e product mentioned in this manual including the software and technical data therein. Co., Ltd. Other trademarks, prespectiveNotice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers, thus herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify anspecifications containeNO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELCONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOSTBUSINESS, REVENUE, DATA, GOODWImport and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import th
iTable of Contents 1 Warnings and Precautions.....................................................................................................1 2 Introduction...........................................................................................................................4 Packing List ...................................................................................................................4 Appearance of the FWT ................................................................................................5 3 Installation.............................................................................................................................8 Installing the SIM Card .................................................................................................8 Installing the Battery .....................................................................................................8 Installing the Power Adapter .........................................................................................9 Connecting the FWT to a Telephone.............................................................................9 Placing the FWT..........................................................................................................10 4 Basic Operations .................................................................................................................11 Booting the FWT.........................................................................................................11 Making or Answering Calls.........................................................................................11 Adjusting the Voice Volume........................................................................................11 Supplementary Services ..............................................................................................12 Security........................................................................................................................12 5 Troubleshooting...................................................................................................................13
11 Warnings and Precautions make sure that they are . de hearing aids, pacemakers, fire alarm systems, automatic gates, and tic-control devices. If you are using an electronic medical device, consult the facturer and confirm whether the radio waves affect the operation of the als or health care facilities: ICU), or nit (CCU). WT near medial devices. y while driving. Secure the FWT on its holder. Do not place the s where it can get loose in a sudden stop or collision. ons of airline companies. Power off your FWT before Basic Cautions According to the packing list, check items in the package box to complete and undamagedBefore installing and using the FWT, read the user guide carefully. Electronic Device Power off your FWT near high-precision electronic devices. The FWT may affect the performance of these devices. Such devices incluother automadevice manuelectronic device. Hospital Pay attention to the following points in hospity Do not take your FWT into the Operating Room (OR), Intensive Care Unit (Coronary Care Uy Power off your Fy Observe any instructions wherever the use of wireless device is prohibited. Traffic Safety Do not use your FWTFWT on the seat or other placey Observe the rules and regulatiboarding an aircraft. Operating Environment y Do not place magnetic storage media such as magnetic cards and floppy disks near the FWT. Radiation from the FWT may erase the information stored on them. y Do not place or use the FWT, battery or power adapter near any heat sources such as fire or a heater; or places with flammable gases; or areas with electrical appliances that give out heat. Otherwise, it will cause fire, explosion and breakdown of the FWT. y Place the FWT in a dry place. When using it, do not put a towel over the FWT, or put it in a box or a suitcase.
2heating, fire, or explosion may result. y WT and other metal materials (such as metal brackets or metal doors and windows) y ission, you are not allowed to modify the architecture and security design s approved by Huawei only. for this transmitter must be installed to provide a separation distance e your FWT for emergency calls. However, connections in all conditions cannot Bmediately. avoid y rwise, the battery may ignite or explode. t battery fluid leaks out or the battery cracks. y Before cleaning the FWT, turn off the FWT. Then disconnect the power supply and take out the battery. Before moving the FWT, disconnect the power supply. y Do not subject your FWT, battery, and power adapter to serious collision or shock. Otherwise, battery leakage, FWT malfunction, overy Do not place sharp metal objects such as pins near the earpiece. The earpiece may attract these objects and hurt you when you use the FWT. y In lightning days, disconnect the power adapter from the external power supply and power off the FWT. In this case, do not touch the FWT and antenna. y Put your FWT, battery, and power adapter in places beyond the reach of children. Do not allow children to use the FWT, battery, or power adapter without guidance. y Do not touch the antenna when a call is going on. Touching the antenna may affect call quality and cause the FWT to operate at a power level higher than needed. The network signal condition will directly affect the quality and stability of a call. Consequently, you should place the FWT in a place where it can receive network signals well. Do not put the FWT in a building with an iron or metal roof. The distance between the Fshould be greater than 25 cm and the distance between FWTs should be greater than 30 cm. y Do not open the chassis in any case and the device should be maintained by a qualified maintenance department. Without permof the FWT. Otherwise, you bear any consequence resulted from the operation without permission. y Your FWT is designed to conform to the authoritative international Radio Frequency (RF) specifications. Use FWT accessoriey The antenna(s) usedof at least 20cm from all persons. Emergency Call You can usb e guaranteed. You should never rely solely on the FWT for essential communications. attery y If the battery fluid gets into eyes, do not rub them. Wash with clean water and seek medical assistance imy If the battery fluid contacts skin or cloth, wash with clean water immediately to irritation to the skin. Do not dispose of the battery in fire. Othey When installing the battery on your FWT, do not push the battery by force les
3y the battery poles. Otherwise fluid leakage, y ell, stop using the battery and keep it y the power adapter and take out the battery when the FWT is not used for a y rwise, the FWT ructions. ery according to local laws or regulations. y adapter. Any violation of this rule may result in y . Short-circuiting the power adapter may cause fire y ds. Otherwise, electric shock, short-circuiting of the y . If the y adapter accidentally, remove the plug of y . y n y the power cord of the power adapter. Do not damage, age materials of your FWT, al regulations in the location where product is to be used. tatement y NOTICE: y Do not connect two poles of the battery with metallic materials, such as cables. Do not disassemble the battery or solderoverheating, fire, or explosion may result. If there is battery leakage, smoke, or strange smaway from open flame to avoid fire or explosion. Disconnectlong time. Do select its self-contained complete battery and power adapter; othemay be spoiled. Dispose of used batteries according to the insty Dispose of the battPower Adapter Use AC power as specified for the power fire or malfunction of the power adapter. Do not short-circuit the power adapteror malfunction of the power adapter. y Remove the dust on the power plug regularly. Do not use worn-out power corpower adapter or fire may result. Do not put the power adapter near the container filled with liquid, such as waterliquid comes into the power adapter, electrical leakage or other faults may result. If the liquid such as water comes into the power the power adapter from the socket immediately. Disconnect the power adapter from the socket before cleaning or maintaining itOtherwise, electric shock or short-circuiting of the battery or power adapter may result. Ensure the plug of the power adapter is properly inserted into the power socket whecharging the battery. Improper insertion may result in electric shock, fire, or explosion. Do not place any heavy object onchange, or pluck the power cord. Environmental Protection Please abide by the local laws in disposing of the packconsumed batteries and used FWT, and try to recycle them. Please observe the national locFCC Sy 15.19
42 Introduction y This device complies with Part 15 of the FCC Rules .Operation is subject to the following two conditions: y (1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. y 15.21 y NOTICE: y Changes or modifications made to this device not expressly approved by Huawei Technologies Co., Ltd. may void the FCC authorization to operate this device. y 15.105 y NOTE: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by connecting or disconnecting the device to a PC, the user is encouraged to try to correct the interference by adopting one or more of the following measures: y Reorient or relocate the receiving antenna. y Increase the distance between the device and the receiver. y Connect the device to an outlet on a circuit different from that to which the receiver is connected. y Consult the dealer or an experienced radio or TV technician for help. y FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device. Packing List The Fixed Wirelesfollowing items. Ifs Terminal (hereinafter referred to as the FWT) package box contains the any of the items is lost or damaged, contact your local dealer.
5it y Certificate of Quality nce of the FWT y Main uny Power adapter y Battery y User Guide Appeara Note: ures are only for your reference, please refer color and shape to product. The figFront View 78910234561 No. Item 1 FWT switch 2 Telephone port 1 3 Telephone port 2 4 USB port 5 DC input 6 blue: The FWT is in work normally. Operating status indicator Slow blinking in
6No. Item 7 Power indicator In blue: The FWT is connected with the power adapter. 8 d. The battery needs to be recharged. Battery indicator In red: The battery is fully electricity or fully chargeFast blinking in red: Slow blinking in red: The battery is being charged. 9 IN USE indicator is picked up. In blue: The handset of the telephone10 Signal indicator In blue: The signal can be received.  NoIf the signal indicator is blinking in blue, it indicates that the SIM card is not in the SIM card is faulty, the PIN code is locked, or the PIN/PUK code is not te: place, entered. Rear View 54321 No. Item 1 Battery container cover
7No. Item 2 Battery port 3 Battery container 4 SIM card slot 5 Wall-mounting brackets
83 Installation  Note: battery, antenna, or SIM card, you need to swich WT from the power adapter. Before installing or removing the off the FWT and disconnect the FInstalling the SIM Card  Note: y Consult the local agent to determine whether to install the SIM card or not. y The SIM card and contact point are vulnerable to damage such as scarring or bending, so you need to insert or remove it with care. Insert the card into the card slot. Put the side with a corner cutting backwards and the sidewith a golden contact downwards. Make sure the card is completely inserted into the slot. Installing the Battery  Note: When the ambient temperature exceeds the tempy arature allowed for charging, the system y y If the battery has not been used for a long time or the battery is exhaused, the screen of the FWT may not function when you charge the battery again. This is normal. After the battery is being charged for a while, you can power on the FWT for use. will stop charging the battery. y When the power adapter is in use, the FWT will automatically charge the battery and stop charging when the battery is fully charged. Remove the battery if the FWT is left unused for a long period.
9Insert the connection cable of the battery into the battery port (make sure the battery is correctly inserted), and then seat the battery in the battery container. Installing the Power Adapter In normal conditions, the FWT relies on the external power adapter for power supply. 1. Insert one end of the power adapter into the DC input port, and the other end into the power supply jack. 2. If the power indicator is in blue, the connection is correct. Use the battery only in the case that the electricity has failed or the external power adapter is unavailable. You must make sure that the battery has been fully charged before putting it into use. Connecting the FWT to a Telephone  Note: y Switch off the FWT and disconnect the power adapter. y Use the cable provided by the manufacturer. y To avoid the call effect from interfering by the wireless signal, place the telephone 1.5m away from the FWT The FWT provides two telephone ports. They are in parallel connection and use the same number.
10 Placing the FWT Horizontal Mounting Place the FWT on a smooth surface with cool air and good ventilation. Keep the FWT away from other objects around for at least 10 cm. Vertical Mounting Fix wall screws into the wall with the screw heads extending approximately 3 mm from the surface of the wall, align the mounting brackets with the screws, push the host towards the wall, and mate the brackets with the screws, ensuring the host is stable.
114 Basic Operations Booting the FWT Press and hole the FWT switch to switch on/off the FWT. cess of the FWT will last about 20 seconds. Then you can view the signal indicator Note: T may be faulty or not in coverage area. The boot pro . If the signal indicator remains off, the FWPlease consult the local agent. Making or Answering Calls 1. ff-hook, make sure the signal indicator is on. n several seconds. FWT will immediately dial the number. o that you can receive calls. Before o2. Dial the number in either of the following ways: y Dial a telephone number in a regular way, and the number will be dialed out iy Dial all the digits of the number plus one #. The 3. Make sure to hook on the telephone in place, sAdjusting the Voice Volume You can adjust the voice volume either when the telephone is in standby mode or working l 1 being the lowest and level 4 the mode. Four volume levels are available, with levehighest. Adjusting the Volume in Standby Mode . Press ##1 to adjust the volume. Press keys from 1 to 4 to select the desired volumn. The keys from 1 to 4 represents volumn level from 1 to 4. 1. Hook off and you can hear the dial tone, which means the telephone service is available. 23.
124. After selecting the desired volume, press * key to save it. If you hear the confirmation tone of a "toot", you have successfully set the volume level.  Note: If you hear the reject tone of "toot, toot", you have pressed an incorrect key. The syetem will return to the off-hook state, and you can retry to make the setting after hearing the dial tone again. Adjusting the Volume During a Call 1. If you are in a session with the remote party, you can press ##1 to adjust the volume. 2. Press keys from 1 to 4 to select the desired volumn. The keys from 1 to 4 represents volumn level from 1 to 4. 3. After selecting the desired volume, press * key to save it. If you hear the confirmation tone of a "toot", you have successfully set the volume level. 4. Keep in session mode.  Note: If you hear the reject tone of "toot, toot" when setting the volume, you have pressed an incorrect key and this setting attempt is failed. However, the session mode remains and you can perform operations from Step 1 to 4 to adjust the volume again. Supplementary Services You need the network carrier to enable the services. Here are several typical services for your reference: Three-Way Calling, Call Forward, Call Holding, Call Waiting, Caller ID Display, Emergency Call. Security The Personal Identification Number (PIN) code pro-tects the SIM card from unauthorized use. The PIN Unblocking Key (PUK) code can unblock the PIN code. The PIN and PUK codes are provided with your SIM card. For details, consult your service provider.
135 power adapter. The switch of the FWT is installed. battery. utput voltage of the power adapter meet the requirement of the FWT. no dial tone is heard FWT to a position with stronger signal. ental interference. For details, consult the an FWT is connected with two phones at the same time, and one is in use, the other hone's handfree function may not work. You can use the handset. Version: V100R001_01 Part number: 31010ASG Troubleshooting The FWT is not connected to ais switched on, but the battery indicator is still off. Check whether the battery If the battery is installed, the problem may result from low power supply of the battery. Please charge the Connect the power adapter to the FWT, but the power indicatorremains off. Check whether the oThe signal indicator is in normal state, but after off-hook. Check the connection between the telephone and the FWT. The voice is unstable and discontinuous. Check whether signal indicator is on. Move the The signal strength may be led by environmcarrier. The volume is too loud or too low. Following the "Adjusting the Volume during a call". The hands-free function cannot be used. Ifp

Navigation menu