Huawei Technologies HG8245 GPON Terminal User Manual

Huawei Technologies Co.,Ltd GPON Terminal

User Manual

Quick StartEchoLife HG8245 GPON Terminal
Huawei Proprietary and CondentialCopyright © Huawei Technologies Co., Ltd.EchoLife HG8245 GPON TerminalV100R002C06Quick StartIssue 01Date 2011-06-30BOM number 31505131
Huawei Technologies Co., Ltd. provides customers with comprehensive technical support. Please feel free to contact our local ofces or headquarters.Huawei Technologies Co., Ltd.Address:Huawei Industrial BaseBantian, LonggangShenzhen 518129People's Republic of ChinaWeb site: http://www.huawei.comTel: 0755-28560000 4008302118Fax: 0755-28560111Email: support@huawei.comHuawei Proprietary and CondentialCopyright © Huawei Technologies Co., Ltd.Copyright © Huawei Technologies Co., Ltd. 2011.All rights reserved.No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.All other trademarks and trade names mentioned in this document are the property of their respective holders.NoticeThe information in this document is subject to change without notice. Unless otherwise stated, this guide serves only as a guide. All statements, information, and recommendations in this document do not constitute a warranty of any kind, expressed or implied.Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Safety PrecautionsBasic Requirements� Keep the device dry when it is stored, transported, and used.� Prevent any violent collision when the device is stored, transported, and used.� Install the device in strict compliance with the requirements of the supplier.� Do not disassemble the device without permission. In the case of a device fault, contact the authorized service center.� Do not change the structure, safety design, or performance design of the device without prior authorization.� Observe relevant laws and regulations and respect legal rights of others when using the device.Environmental Requirements� Install the device in a well-ventilated environment that is free from direct sunlight.� Keep the device clean and free from dust.� Keep the device away from water sources or damp areas.� Do not place any object on the device, so that the device will not be damaged due to overheating or deformation.� Reserve a space of at least 10 cm above and around the device for heat dissipation.� During the installation, keep the device away from heat sources or exposed fire sources such as electric heaters and candles.� During the installation, keep the device away from electric appliances that generate strong magnetic or electric fields, such as microwave ovens, refrigerators, and mobile phones.Instructions for Cleaning� Before cleaning the device, stop the device, switch off the power, and disconnect all cables, including the power cable, optical fiber, and network cable.� Use a clean, soft, and dry cloth to clean the shell of the device. Do not use any cleaning agent or spray to clean the shell of the device.To use the device properly and safely, read the safety precautions carefully before using the device and strictly observe these precautions when using the device.1
Safety PrecautionsInstructions for Use� Use only the accessories delivered or recommended by the supplier, for example, the power adapter and battery.� The power supply voltage of the device must meet the requirements for the input voltage of the device.� Keep the power plug clean and dry to prevent electric shocks or any other hazard.� Dry your hands before connecting or disconnecting cables.� Stop the device and switch off the power before connecting or disconnecting cables.� Switch off the power and disconnect all cables, including the power cable, optical fiber, and network cable, during periods of lightning activities.� Switch off the power and then remove the power plug if the device is to be unused for a long time.� Prevent water or other liquid from entering the device. If any liquid enters the device accidentally, immediately switch off the power and disconnect all cables, including the power cable, optical fiber, and network cable. In the case of a device fault, contact the authorized service center.� Do not crush, pull, drag, or excessively bend the cables as doing so may damage the device and cause the device to malfunction.� Do not use damaged or deteriorating cables.� Do not look into the optical port without eye protection.� If an abnormality occurs, for example, smoke, unusual sound, and smell, stop the device immediately, switch off the power, disconnect all cables (such as the power cable, optical cable, and network cable) to the device, and contact the authorized service center.� Prevent objects, such as metal, from entering the device through the heat dissipation hole.� Do not scratch or abrade the shell of the device. Otherwise, the fallen coating may lead to device abnormalities (such as short-circuit) and bodily allergy.� Keep the device out of the reach of children as the components or accessories may be swallowed. �Keep the running device at least 20 cm away from the human body.Environmental Protection� Dispose of the device or batteries properly and hand them over to the certied recycling station.� Dispose of the packing materials, expired batteries, and old or abandoned devices in accordance to local laws and regulations (recycling them is strongly recommended).2
3After opening the product packaging, check each item against the following checklist. Contact the supplier if there are any discrepancies.GPON terminal Power adapterQuick Start Network cablePacking ListNOTEThe gures shown in this document may differ from the actual products, but the difference does not affect the functions of the products.
4Product OverviewAppearance and ports of the HG82451Optical port 2Ethernet port 3POTS port4Power switch 5Power port 6Indicator7Backup battery monitoring port 8USB port 9WLAN switch10 WPS switch 11 RESET
5Installing the GPON TerminalNOTE1. HG8245 can be mounted onto a wall or be placed on a workbench.2. Other installation modes are not allowed.Perform the following operations to mount HG8245 onto the wall.Step 1 Mark the positions of two holes, keeping the holes 72 mm from each other.Step 2 Select a proper drill according to the outer diameter of the screws. Use a hammer drill to drill the marked positions on the wall. Then clean the wall and install two expansion bolts.Step 3 Use a screwdriver to fasten the screws into the expansion bolts, leaving the heads of the screws 3 mm over the wall. Then install the GPON terminal to the screws.Place the GPON terminal on the workbench.
6Connecting CablesCable Connections Between the HG8245 and Other Devices1Optical port in the wall 2PC 3IP STB4TV set 5Phone 6Fax machine7Power socket 8Backup battery unit 9USB storage device10 Wi-Fi terminal
7Step 1 Use an optical fiber to connect the OPTICAL port on the GPON terminal to the optical port in the wall.Step 2 Use a network cable to connect the LAN port to a PC or the Ethernet port on the IP STB.Step 3 Use a phone line to connect the TEL port to a phone or fax machine.Step 4 Use a power adapter to connect the POWER port to the power socket.Step 5 Use a USB data cable to connect the USB port to the USB storage device.Step 6 Press the ON/OFF power switch.Step 7 Press the WLAN switch to enable the Wi-Fi access function. By default, this function is enabled.Step 8 Press the WPS switch to enable the WPS encryption function.NOTEConnecting CablesRefer to the preceding cable connections of each product and select the following corresponding steps to connect the GPON terminal.NOTEThe optical connector connected to the OPTICAL port on the HG8245 is an SC/APC connector, and the type of the optical connector connected to the optical port in the wall is determined by practical conditions.The preceding figure connects the power adapter as an example. When the backup battery unit is used, a power monitoring cable is used for connecting the BBU port to the monitoring port of the backup battery unit. This allows the GPON terminal to monitor the backup battery unit. For details on how to use the backup battery unit, see the usage guide to the backup battery.NOTEBefore enabling the WPS encryption function of a GPON terminal, ensure that the function is set in the system software in advance. After successful setting, press the WPS switch for the settings to take effect.NOTEThe Ethernet port on the HG8245 is a 10/100/1000M Base-T Ethernet port.
8Step 1 Set the IP address of the PC in the same subnet 192.168.1.64 – 192.168.1.253. Example: - IP address: 192.168.1.100 - Subnet mask: 255.255.255.0Step 2 Enter the management IP address of the GPON terminal in the address box of Internet Explorer and press Enter. The login window is displayed.Step 3 In the login window, select your preferred language, enter the user name and password (default user name is TELMEX and default password is WEP Key), and click Login. After the password is authenticated, the Web configuration window is displayed.Logging in to the Web Conguration WindowPerform the following steps to log in to the Web configuration window of a GPON terminal.NOTEThe default management IP address and subnet mask of the GPON terminal are as follows:- IP address: 192.168.1.254- Subnet mask: 255.255.255.0
Indicator Description9Indicator Status DescriptionWPSSteady on The WPS function is enabled.Blinking A Wi-Fi terminal is connecting to the system.Off The WPS function is disabled.WLANSteady on The WLAN function is enabled.Blinking Data is being transmitted.Off The WLAN function is disabled.USBSteady on The USB port is already connected but no data is transmitted.Blinks twice a second Data is being transmitted.OffThe system is not powered on or the USB port is not connected.TEL1 – TEL2Steady on The connection between the TEL port and the voice server has been set up.Blinks twice a secondThe connection between the TEL port and the voice server is set up and the phone is in the off-hook or ringing state.Blinks once two seconds The TEL port is registering with the voice server.Off The connection between the TEL port and the voice server is not set up.LAN1 – LAN4Steady on The Ethernet connection is in the normal state.Blinking Data is being transmitted on the Ethernet port. Off The Ethernet connection is not set up.INTERNETSteady on The internet connection is in the normal state.Blinks once two seconds The terminal is connecting to the internet. Off The internet connection is not set up.PON See Table 2.POWERSteady green The terminal is powered on.Steady yellow The backup battery is supplying power.Off The power supply is cut off.Table 1 Indicator status description 1NOTEIn the preceding table, if the indicator status is blinking but the duration is not specied, the blinking duration of the indicator is determined by the transmitted data trafc.
10Table 2 Indicator status description 2Indicator DescriptionIndicator Status DescriptionPONGreen steady on The fiber connection between the terminal and the uplink device is set up.Green blinking The terminal attempts to set up a connection with its upper-layer device.Red steady on The fiber connection between the terminal and the uplink device is interrupted.Red blinking The terminal is a rogue terminal.PON is GPON indicator. The status of PON reflects the connection between GPON terminal and its upper-layer device. The following table describes the status of the PON indicator.NOTEIf the indicator is in the state described in No. 4, that is, the terminal is a rogue terminal, contact the service provider immediately.
11FAQsThe POWER indicator Is off.� Check whether the ON/OFF button on the rear plane is depressed.� Ensure that the power adapter matches the GPON terminal.� Check whether the power supply is connected properly.The LAN indicator is off.� Ensure that the network cable matches the GPON terminal.� Check whether the network cable is properly connected.� Check whether the network adapter works in the normal state.The TEL indicator is off.� Check whether a voice service user is configured and enabled.The WPS indicator is off.� Check whether the WPS function is enabled.The WLAN indicator is off.� Check whether the WLAN function is enabled.The USB indicator is off.� Check whether the USB device is properly connected.The phone does not ring upon an incoming call but communication is in normal state when the phone is in the off-hook state.� The GPON terminal provides a maximum of 60 V AC ringing current voltage. Check whether the ringing current voltage of the phone is higher than 60 V AC. If it is higher than 60 V AC, replace it with another phone.How can I reset the GPON terminal?� Press RESET by using a needle-type object to reset the GPON terminal.How can I restore factory defaults?� Press RESET by using a needle-type object for longer than 10s to restore factory defaults and reset the GPON terminal. If the indicator is off and then is lit, the system is reset successfully.
12Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.&$87,21Item HG8245Dimensions(H x W x D) 195mm×174mm×34mmWeight (including the power adapter) About 550gSystem power supply 11V – 14V DC, 2APower adapter input 100V – 240V AC 50Hz – 60HzMaximum system power consumption 14WAmbient temperature 0oC – +40oC Ambient humidity 5% – 95%(non-condensing)Technical SpecicationsNOTEThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:— Reorient or relocate the receiving antenna.— Increase the separation between the equipment and receiver.— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.— Consult the dealer or an experienced radio/TV technician for help.
User InformationPersonal or company's full name: __________________________________________________Address/Postal Code: ____________________________________________________________Telephone: ____________________________________________________________________Email: ________________________________________________________________________Product Type: __________________________________________________________________Product Serial Number: __________________________________________________________Purchase Date: _________________________________________________________________Invoice Number: ________________________________________________________________Dealer's Name: _________________________________________________________________Dealer's Address: _______________________________________________________________Dealer's Telephone: _____________________________________________________________Warranty CardThank you for choosing Huawei Technologies Co., Ltd.To get better services, please read this warranty card carefully, ll in the required information, and preserve this card in good condition.Preserve well. No reissue.Dealer's Seal
Limited WarrantyHuawei Technologies Co., Ltd.Address: Huawei Industrial BaseBantian, LonggangShenzhen 518129People's Republic of ChinaCode: 518129Web site: http://www.huawei.com Subject to the exclusions contained below, Huawei Technologies Co., Ltd. (Huawei for short) warrants its access terminals ("Products") to be free from defects in materials and workmanship under normal consumer usage for one year from the date of purchase of the product ("Warranty period"). During the warranty period, a Huawei authorized service partner shall remedy defects in materials and workmanship free of charge.Special Notice:1. The warranty card shall be applicable only after being stamped by the dealer.2. The warranty card must be preserved in good condition and free of any scratch or alteration.3. To claim such service for defects that are not included in the following exclusion terms, the warranty card and the invoice that records that product serial number shall be presented to a Huawei authorized service partner.Exclusions:In any of the following cases, the warranty card becomes unenforceable or inapplicable without prior notice:1. The defects are caused by improper handling in transportation and assembly.2. The defects are caused by the fact that the product is dismantled or altered by anyone that is not from a Huawei authorized service partner.3. The defects are caused by the fact that the product is used in a harsh environment that is not suitable for the operation of the product.4. The defects are caused by any force majeure including but not limited to re, earthquake, lightning, and tsunami.5. The defects are caused by the fact that the product is used or handled incorrectly, roughly or not as instructed in the applicable User Guide.6. The normal wear and tear, including but not limited to the normal wear and tear of the shell and the power module, shall not be covered by the limited warranty.7. The warranty card is altered or illegible, or the product serial number recorded on the warranty card is inconsistent with the actual one imprinted or labeled on the product.In any case that is not covered by this limited warranty or should the warranty expire, Huawei shall charge for the service(s) claimed for the products if the product is still remediable. Huawei reserves all rights to interpret this limited warranty.
Huawei Technologies Co., Ltd.Address: Huawei Industrial BaseBantian, LonggangShenzhen 518129People's Republic of ChinaWeb site: http://www.huawei.com Qualification CardPASS

Navigation menu