Huawei Technologies HG8245HE GPON Terminal User Manual 1

Huawei Technologies Co.,Ltd GPON Terminal 1

User Manual

EchoLife HG8245H，an intelligent routing-type ONTSmart service Smart interconnectionSmart O&MA Smarter Way for Your Broadband Life
GPONPortDimensions (HxWxD)• Class B+• Receiver sensitivity: -27 dBm• Wavelengths: US 1310 nm, DS 1490 nm• WBF• Flexible mapping between GEM Port and TCONT• GPON: consistent with the SN or passwordauthentication defined in G.984.3• Bi-directional FEC• SR-DBA and NSR-DBADevice Parameters Product FunctionInterface Parameters176 mm x 138 mm x 26 mm (without an external antenna)EthernetPort•Ethernet port-based VLAN tags and tag removal• 1:1 VLAN, N:1 VLAN, or VLAN transparenttransmission• QinQ VLAN• Limit on the number of learned MAC addresses• MAC address learningPOTSPort•Maximum REN: 4• G.711A/μ, G.729a/b and G.722 encoding/decoding• T.30/T.38/G.711 fax mode• DTMF• Emergency calls (with the SIP protocol)USBPort• USB2.0• FTP-based network storageSmart interconnection•Smart Wi-Fi coverage•SIP/H.248 auto-negotiation•Any port any service•Parental control •L2/L3 (IPv4) forwarding: 1G uplink, 2G downlinkSmart service•Smart Wi-Fi sharing:Portal/802.1x authentication SoftGRE-based sharing •Association of one account with two POTS portsSmart O&M•IPTV video quality diagnosis •Variable-length OMCI messages•Active/Passive rogue ONT detection and isolation•Call emulation, and circuit test and loop-line test•PPPoE/DHCP simulation testing•WLAN emulationLayer 3 Features•PPPoE/Static IP/DHCP•NAT/NAPT•Port forwarding•ALG, UPnP•DDNS/DNS server/DNS client•IPv6/IPv4 dual stack, and DS-Lite•Static/Default routes•Multiple services on one WAN portWeightOperating temperatureOperating humidityPower adapter inputSystem power supplyStatic power consumptionMaximum power consumptionPortsIndicatorsabout 1000 g0°C to +40°C5% RH to 95% RH (non-condensing)100 –240 V AC, 50 –60 Hz11 –14 V DC, 2 A5 W15.5 W2POTS + 4GE + Wi-Fi+ USBPOWER/PON/LOS/LAN/TEL/USB/WLAN/WPSWLAN• IEEE 802.11 b/g/n• 2 x 2 MIMO• Antenna gain: 5 dBi• WMM• Multiple SSIDs• WPS• Air interface rate:2. 4G: 300 MbpsMulticast•IGMP v2/v3 proxy /snooping•MLD v1/v2 snooping•Multicast services through Wi-Fi•Ethernet port ratelimitation•802.1p priority•SP/WRR/SP+WRR•Broadcast packet rate limitationQoS Security•SPI firewall•Filtering based onMAC/IP/URL addresses•OMCI/Web UI/TR069•Dual-system softwarebackup and rollbackCommon O&M Power Saving•Indicator power saving•Scheduled Wi-Fi shutdown
FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.—Consult the dealer or an experienced radio/TV technician for help.Radiation Exposure StatementThis device complies with FCC radiation exposure limits set forth for an uncontrolledenvironment and it also complies with Part 15 of the FCC RF Rules. This transmitter mustnot be co-located or operating in conjunction with any other antenna or transmitter. Thisequipment should be installed and operated with a minimum distance of 20 centimetersbetween the radiator and your body.This equipment complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may causeundesired operation.Caution!The manufacturer is not responsible for any radio or TV interference caused by unauthorizedmodifications to this equipment. Such modifications could void the user authority to operatethe equipment.

Navigation menu