Huawei Technologies HW-02G Mobile Wifi User Manual UserManual HW 02G

Huawei Technologies Co.,Ltd Mobile Wifi UserManual HW 02G

Contents

UserManual_HW_02G

1
Thank you for purchasing the HW-02G. This HW-02G
brings you a high speed wireless network connection.
This document will help you understand your HW-02G so you can start using it right away.
Please read this document carefully before using your HW-02G.
For detailed instructions for logging in to the web management page, refer to "Logging In to
the Web Management Page" on page 14.
2
Getting to Know Your HW-02G
Note:
The HW-02G function descriptions and illustrations in this document are for your
reference only. The product you have purchased may vary.
Application Scenarios
Wi-Fi devices (such as smartphones, tablet computers, and game consoles) or computers can
all access the Internet through HW-02G. The specific connection procedure depends on the
operating system of the Wi-Fi device or computer. Establish a connection according to your
device's specific instructions.
To access the Internet through a USB port connection, install the driver according to the
instructions.
3
Scenario 1: Connecting multiple devices
through Wi-Fi
Scenario 2: Connecting multiple devices
through Wi-Fi and USB simultaneously
4
Appearance
2
1
3
4
Power button
Lanyard hole
Screen
Micro USB port
5
Screen
6
Status bar
Character zone
When connect to GSM/3G/LTE network, show the operator name
When connect to public Wi-Fi hotspot, show the SSID name of the hotspot
When SIM card is not normal, show "PIN1 code required"/"PIN unlock code required";
Public WLAN
User can tap on to turn on or turn off Wi-Fi.
Data usage information
If user set the data information, show used data and total data.If user turn off the display of data on Home
screen, hide this zone.
Menu
Tap on to view more functions. If user turn on Auto-check for updates and there is new
available update, show an colored image on the right-up of the button.
Wi-Fi connection guide
7
Signal strength
R: when in roaming status; Show network mode, including "3G/LTE".
: when connecting to public Wi-Fi hotspot.
Icon of traffic.
Show the icon when connect to network. When there is upload and download data the icon
changes color. When disconnect from network, hide the icon.
Time information
Wi-Fi
8
Wi-Fi turned on.
Number of connected Wi-Fi devices.
Wi-Fi Mode
DFS
When HW-02G is during DFS checking progress, the DFS icon show and flashes. When
HW-02G connect to the 5G_W52/W53 network that can be only used indoor only, show this
icon. Otherwise hide the icon.
USB
Show it when connected to USB cable and HW-02G supports Charging with standard
functions process. If connected to USB cable only for charging, hide this icon.
Battery
: Battery level from low to high.
9
SSID and Wireless Network Encryption Key
When a Wi-Fi device establishes a connection to the HW-02G for the first time, you may need
to enter the default Service Set Identifier (SSID) and wireless network encryption key. These are
printed on the HW-02G.
To view the current SSID and wireless network encryption key on the screen:
1. Press the
About
>
SSID&password
on
the homepage.
2. The SSID and Password display on the
screen.
10
Getting Started
Installing a SIM Card
Caution:
Use a standard miniUIM card compatible with the HW-02G, otherwise you will damage
your HW-02G.
Charging the Battery
If the battery has not been used for an extended period of time, recharge it before use.
Note:
Only use chargers compatible with the HW-02G and provided by a designated
manufacturer. Use of an incompatible charger or one from an unknown manufacturer
may cause the HW-02G to malfunction, fail, or could even cause a fire. Such use voids
all warranties, whether expressed or implied, on the product.
The HW-02G’s charger model is HW-050100XYW. X and Y represent letters or
numbers that vary by region. For details about the specific charger model, contact an
authorized dealer.
11
12
Connecting to the Internet via Wi-Fi
The HW-02G's management parameters have been preset according to your operator's
requirements. You can quickly connect to the Internet by following these steps:
Step 1: Turn on the HW-02G
Press and hold the button until the screen lights up, indicating that the HW-02G is turned
on.
Note:
Press and hold the button to turn off the HW-02G.
Step 2. Establish a Wi-Fi connection (using a computer running the
Windows XP operating system as an example)
1. Ensure that the HW-02G's Wi-Fi function is on.
2. Select Start > Control Panel > Network Connections > Wireless Network Connection.
Note:
13
Before establishing a Wi-Fi connection, ensure that the computer is equipped with a
wireless network adapter. If the computer indicates a wireless network connection, the
wireless network adapter can be used. Otherwise, verify that your wireless network
adapter is working properly.
3. Click View available wireless networks to view a list of available wireless networks.
4. Select the wireless network connection with the HW-02G's SSID and click Connect.
Note:
If the wireless network connection is encrypted, enter the correct wireless network
encryption key.
Press the WPS button twice to view the current SSID and wireless network encryption
key on the screen.
5. Wait a moment for the wireless network connection icon to appear in the system tray in
the lower right corner of the computer screen. The wireless network connection is then
established.
Step 3: Connect to the Internet
If data is transmitted, the HW-02G will automatically connect to the Internet. If data is not
14
transmitted for a period of time, the HW-02G will automatically disconnect from the network
connection.
Logging In to the Web Management Page
1. Make sure the connection between the HW-02G and the Wi-Fi device or computer is
working normally.
2. Open the browser, and enter http://hw-02g.com in the address box.
3. Enter the password to log in to the web management page.
Note:
The default password is admin.
15
Daily Use
Battery Saving Mode
If the HW-02G has been inactive for some time, the HW-02G enters the standby mode, in
which the display screen turns off. Pressing any button causes the display screen to light up.
When the HW-02G is being powered only by the battery, you can choose to enable or disable
the automatic Wi-Fi turnoff function. If this function is enabled and if no Wi-Fi devices access
the HW-02G for a period of time, the Wi-Fi turns off automatically. You can press any button
to turn the Wi-Fi on again.
Verifying the PIN
If the PIN verification function is enabled, log in to the web management page and enter the
correct PIN according to the instructions. PIN/PUK codes are supplied by your operator along
with the SIM card. For details, please consult your operator.
16
Restoring to Factory Settings
If you forget some configuration parameters, you can restore the HW-02G to its factory
settings and then configure the HW-02G again.
Press and hold the RESET button until the display screen turns off. The HW-02G is then restored
to its factory settings.
Note:
After you carry out this operation, the HW-02G's personal configuration parameters will
all be deleted. All configurations on the web management page will be restored to the
factory settings.
17
Example 1: Connecting to a Game Console (for example, PSP)
through Wi-Fi
1. On the PSP, turn on the WLAN.
2. Choose Settings > Network Settings.
3. Select Infrastructure Mode.
4. Select New Connection, and enter the
connection name.
5. Select Scan to search for wireless
networks. A list of access points will be
displayed on the screen.
6. Select the access point with the
HW-02G's SSID, and press the ► button
on the PSP. Confirm the SSID, and enter
the correct wireless network encryption
key.
7. Press the ► button to proceed to the
next step, and then press the X button to
18
save settings.
8. Select Test Connection to test whether
the network connection is successful.
9. You can now open the browser and
access the network.
19
Example 2: Connecting to a Tablet Computer (for example, iPad)
through Wi-Fi
1. Touch Settings > WLAN to turn on WLAN.
2. The tablet computer automatically
searches for wireless connections and
displays a list of access points.
3. Select the access point with the HW-02G's
SSID.
4. If required, enter the correct wireless
network encryption key, and tap Join.
(The lock icon indicates that the encryption
key is required to connect to this wireless
network.)
Note:
Wi-Fi devices, such as an iPhone, iPod touch, PS3 and NDSi, can all access the Internet
through the HW-02G. For specific operations, refer to the Wi-Fi device's user manual.
20
Tips
When the HW-02G is in use for an extended period of time, it will become warm and may
overheat. Should this happen, the HW-02G will automatically close the network connection
and turn off to protect itself from damage. If this occurs, place the HW-02G in a well ventilated
space to allow the heat to dissipate, then turn it on and continue to use it as normal.
If you are unable to use the HW-02G as normal, try the following:
Consult the user manual on the web management page.
Restart the HW-02G.
Restore the HW-02G to the factory settings.
Consult your operator.
is a trademark of ETSI.
Version: V100R001_01

Navigation menu