Huawei Technologies MU609 Mobile Cellular module supporting GSM850, PCS1900, UMTS FDD II/V. User Manual English

Huawei Technologies Co.,Ltd Mobile Cellular module supporting GSM850, PCS1900, UMTS FDD II/V. English

Contents

MU609 Module QSG-English

 Copyright ©  Huawei Technologies Co., Ltd. 2013. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions ,  , and  are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers, thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY
 APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein.
i Contents Getting to Know the MU609 ........................................................................................................................... 1 Dimension .................................................................................................................................1 Position of RF Connectors ......................................................................................................2 Pin Definitions ..........................................................................................................................3
1 Thank you for purchasing HUAWEI MU609 HSPA mini PCIE Module (hereinafter referred to as the MU609) Note:    This manual briefly describes the dimension, the position of RF connectors and Pin definitions.  You are recommended to read the manual before using the MU609. Getting to Know the MU609 Dimension  The package of the mini PCIE module is 52 pin PCIE with a dimension of 51 mm × 30.4 mm × 3.4 mm. It is applied to the user interface board, and can be used as a wireless terminal in a network environment.
2    Position of RF Connectors The PCIE Adapter module provided three antenna connectors (MAIN_ANT, GPS_ANT and AUX_ANT) for connecting the external antennas.
3  Pin Definitions  The sequence of mini-PCIE interface is shown below.
4   The Pin definitions of the Mini PCIE interface is shown below.
5 PIN No. Pin Name I/O Description DC Characteristics (V) Mini PCI Express Standard Description HUAWEI Pin Description Min. Typ. Max. 1 WAKE# WAKE# O Open collector active low signal. This signal is used to wake up the host. –0.3 - - 2 3.3Vaux VCC_3V3 P 3.3 V DC supply rails from the PC side. 3.0 3.3 3.6 3 COEX1 NC   - Not connected - - - 4 GND GND - Mini Card ground - - - 5 COEX2 NC - Not connected - - - 6 1.5 V NC - Not connected - - - 7 CLKREQ# NC - Not connected - - - 8 UIM_PWR UIM_PWR O Power source for the external UIM/SIM card - 1.8/2.85 - 9 GND GND - Mini Card ground - - -
6 PIN No. Pin Name I/O Description DC Characteristics (V) Mini PCI Express Standard Description HUAWEI Pin Description Min. Typ. Max. 10 UIM_DATA UIM_DATA I/O External UIM/SIM data signal –0.3 1.8/2.85 2.1/3.05 11 REFCLK- NC - Not connected - - - 12 UIM_CLK UIM_CLK O External UIM/SIM clock signal –0.3 1.8/2.85 2.1/3.05 13 REFCLK+ NC - Not connected - - - 14 UIM_RESET UIM_RESET O External UIM/SIM reset signal. –0.3 1.8/2.85 2.1/3.05 15 GND GND - Mini Card ground - - - 16 UIM_Vpp Reserved - Reserved - - - 17 Reserved Reserved - Reserved - - - 18 GND GND - Mini Card ground - - - 19 Reserved Reserved - Reserved - - -
7 PIN No. Pin Name I/O Description DC Characteristics (V) Mini PCI Express Standard Description HUAWEI Pin Description Min. Typ. Max. 20 W_DISABLE# W_DISABLE#  - For ending the wireless communications. Please refer to the LGA module, which is on the PCIE Adapter. For MU609 the module cannot support this function. - - - 21 GND GND - Mini Card ground - - - 22 PERST# NC - Not connected - - - 23 PERn0 NC - Not connected - - - 24 3.3Vaux VCC_3V3 - 3.3 V DC supply rails from the PC side. 3.0 3.3 3.6 25 PERp0 NC - Not connected - - - 26 GND GND - Mini Card ground - - -
8 PIN No. Pin Name I/O Description DC Characteristics (V) Mini PCI Express Standard Description HUAWEI Pin Description Min. Typ. Max. 27 GND GND - Mini Card ground - - - 28 1.5 V NC - Not connected - - - 29 GND GND - Mini Card ground - - - 30 SMB_CLK NC - Not connected - - - 31 PETn0 NC - Not connected - - - 32 SMB_DATA NC - Not connected - - - 33 PETp0 NC - Not connected - - - 34 GND GND - Mini Card ground - - - 35 GND GND - Mini Card ground - - - 36 USB_D- USB_D- I/O USB signal D- - - - 37 GND GND - Mini Card ground - - -
9 PIN No. Pin Name I/O Description DC Characteristics (V) Mini PCI Express Standard Description HUAWEI Pin Description Min. Typ. Max. 38 USB_D+ USB_D+ I/O USB signal D+ - - - 39 3.3Vaux VCC_3V3 P 3.3 V DC supply rails from the PC side. 3.0 3.3 3.6 40 GND GND - Mini Card ground - - - 41 3.3Vaux VCC_3V3 P 3.3 V DC supply rails from the PC side 3.0 3.3 3.6 42 LED_WWAN# LED_WWAN I   Active-low LED signal indicating the state of the card - - - 43 GND GND - Mini Card ground - - - 44 LED_WLAN# NC - Not connected - - - 45 Reserved PCM_CLK O PCM interface clock –0.3 1.8 2.1
10 PIN No. Pin Name I/O Description DC Characteristics (V) Mini PCI Express Standard Description HUAWEI Pin Description Min. Typ. Max. 46 LED_WPAN# NC - Not connected - - - 47 Reserved PCM_DOUT O PCM I/F data out –0.3 1.8 2.1 48 1.5 V NC - Not connected - - - 49 Reserved PCM_DIN I PCM I/F data in –0.3 1.8 2.1 50 GND GND - Mini Card Ground - - - 51 Reserved PCM_SYNC O PCM interface sync –0.3 1.8 2.1 52 3.3Vaux VCC_3V3 P 3.3 V DC supply rail from the PC side. 3.0 3.3 3.6

Navigation menu