Huawei Technologies MU736 HSPA + Module User Manual Manual system

Huawei Technologies Co.,Ltd HSPA + Module Manual system

UserManual.wiki >

Huawei Technologies >

MU736 User Manual >

User Manual.pdf HTML Version

User Manual.pdf

User Guide

For Windows 8.1 Tablet-laptop TL10IE2

Regulatory Compliance

Information

FCC Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

measures:

z Reorient or relocate the receiving antenna.

z Increase the separation between the equipment and

receiver.

z Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

z Consult the dealer or an experienced radio/TV technician

for help.

This device meets the government’s requirements for exposure

to radio waves.

This device is designed and manufactured not to exceed the

emission limits for exposure to radio frequency (RF) energy set

by the Federal Communications Commission of the U.S.

Government, Industry Canada, and other national regulatory

agencies.

The exposure standard employs a unit of measurement known

as the Specific Absorption Rate, or SAR. Tests for SAR are

conducted using standard operating positions accepted by the

FCC with the device transmitting at its highest certified power

level in all tested frequency bands. Although the SAR is

determined at the highest certified power level, the actual SAR

level of the device while operating can be well below the

maximum value. This is because the device is designed to

operate at multiple power levels so as to use only the power

required to reach the network. In general, the closer you are to a

wireless base station antenna, the lower the power output.

Equipment Authorization has been granted to this model with all

reported SAR levels evaluated as in compliance with the FCC

RF exposure guidelines. SAR information on this device is on

file with the FCC and can be found under the Display Grant

section of www.fcc.gov/oet/ea/fccid after searching the FCC ID:

WL6-TMBCC0002

For questions related to the EMC performance of this product,

contact:

Elitegroup Computer Systems Co., Ltd

No.239, Sec. 2, Ti Ding Blvd., Taipei, Taiwan 11493

886-2162-1177

Canadian Department of Communications Compliance

Statement

This digital apparatus does not exceed the Class B limits for

radio noise emissions from digital apparatus set out in the Radio

Interference Regulations of the Canadian Department of

Communications. This device complies with Industry Canada

licence-exempt RSS standard(s). Operation is subject to the

following two conditions: (1) this device may not cause

interference, and (2) this device must accept any interference,

including interference that may cause undesired operation of

the device.

Le présent appareil numerique német pas de bruits radio

électriques dépassant les limites applicables aux appareils

numériques de la classe B prescrites dans le Réglement sur le

broullage radioélectrique édicté par le ministére des

Communications du Canada. Le présent appareil est conforme

aux CNR d’Industrie Canada applicables aux appareils radio

exempts de licence. L’exploitation est autorisée aux deux

conditions suivantes : (1) l’appareil ne doit pas produire de

brouillage, et (2) l’utilisateur de l’appareil doit accepter tout

brouillage radioélectrique subi, même si le brouillage est

FCC Caution: Any changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority to operate

this equipment.

susceptible d’en compromettre le fonctionnement.

CE mark. Declaring compliance to all the applicable

European Union (EU) directives. For CE mark related

questions:

Elitegroup Computer Systems Co., Ltd

No.239, Sec. 2, Ti Ding Blvd., Taipei, Taiwan 11493

886-2162-1177

French SAR/DAS

Votre ordinateur tablette a un DAS. Pour plus d'informations,

voir le portail radiofréquences-sante-environnement:

www.radiofrequences.gouv.fr

In the European Union, this symbol indicates that

this product including battery must not be disposed

of with household waste. It is your responsibility to

hand it over to a designated collection point for the

recycling of waste electrical and electronic

equipment. For more information, please contact

your local waste collection center or the point of

purchase of this product.

Japan VCCI Statement

Taiwan battery recycling:

Translation

– please recycle batteries

Attention: Teachers, Parents

and Adult Supervisors

This product is an educational tool designed for school children,

ages 6 and up. There must be supervision by an adult on

school children under 10 when using this Intel Classmate PC -

Convertible. It is a must to have a thorough explanation to

students on safe and proper handling of the Intel Classmate PC

- Convertible, power supply, battery pack, and power cord.

Be sure to keep the power cord away from

younger children

Please ensure that students understand the following:

 As with all electrical products, precautions should be observed

during handling and use to prevent electric shock. The power

supply (adapter) should not be handled by the children.”

 Emphasize to students that this device is an educational tool and

not a toy. The computer, power supply, battery pack or power

cord should not be dropped, crushed, stepped on or otherwise

abused.

 Ensure students understand the safe and proper handling of

power cord and power supply. Misuse could result in serious

injury.

 The teacher, parent or adult supervisor should periodically

inspect the computer; power supply and power cord for damage

and replace it, if necessary.

 Students should report any damage or loose parts to their

teacher, parent or adult supervisor, immediately.

 Do not leave the PC plugged in or “on” when enclosed in a

non-vented container, such as a school backpack, as overheating

may occur.

 It is recommended that students should take a 5 minute break

every 30 minutes of use.

Safety Precautions

The following are lists of precautionary measure the students

must understand before using this computer inside the

classroom or home environment:

1. Do not place near the fire or other sources of heat.

2. Do not expose to magnetic fields.

3. Do not expose to direct sunlight.

4. Do not expose to rain or moisture.

5. Do not place heavy objects to add heavy pressure on

the computer.

6. Do not drop the computer.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN

INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING

TO THE INSTRUCTIONS.

Contents

1. Getting to know your computer ........................................ 1

Package contents ................................................................................. 1

Separating your tablet-lapt op ................................................................ 1

Layout ................................................................................................... 2

Tablet Views ................................................................................. 2

Front .................................................................................... 2

Back ..................................................................................... 3

Left (I/O cabinet) .................................................................. 4

Bottom ................................................................................. 4

Keyboard Duck Views .................................................................. 5

Connectors and indicators ................................................... 5

Shortcut keys ....................................................................... 6

2. Using your computer ...................................................... 7

Powering ON/OFF ................................................................................ 7

Powering on your computer ......................................................... 7

Powering off your computer ......................................................... 7

Putting your tablet into sleep mode .............................................. 8

Waking up your computer ............................................................ 9

Locking or unlock the screen rotation ................................................... 9

Basic touch screen operations .............................................................. 9

Digital pen operations ......................................................................... 11

3. Windows Interface ........................................................... 13

Start Screen ........................................................................................ 13

Desktop ............................................................................................... 14

Customizing your taskbar ........................................................... 15

The Charms menu .............................................................................. 16

All Apps ............................................................................................... 17

Switching back to Start screen ........................................................... 17

3. Setup and Connection ..................................................... 19

Windows Activation ............................................................................. 19

Configuring your Microsoft Account .................................................... 20

Setup your Start screen ...................................................................... 20

Adding an App ............................................................................ 20

Removing an App ....................................................................... 21

Wireless LAN ...................................................................................... 21

Enabling wireless connection ..................................................... 21

Connecting to a wireless LAN .................................................... 22

Micro SD Card Slot ............................................................................. 22

To insert your micro SD card ...................................................... 22

To remove your memory card .................................................... 23

Installing the SIM card ........................................................................ 23

Connecting an External Device .......................................................... 25

Connecting to the USB port ....................................................... 25

Connecting to the HDMI port ...................................................... 26

4. Battery ........................................................................... 27

Charging your battery ......................................................................... 27

Inspecting your battery status ............................................................. 27

By opening the Charms .............................................................. 27

By inspecting the taskbar ........................................................... 28

Approximate status of your battery ..................................................... 28

5. Windows Help and Troubleshooting .............................. 30

Windows Help ..................................................................................... 30

Troubleshooting .................................................................................. 30

6. Specification..................................................................... 35

1. Getting to know your

computer

This chapter provides an overview of the tablet, including the locations of

the connectors and controls, tablet features, and accessories.

Package contents

Carefully unpack your box and take out the items listed as below. If any

of the items is missing or damaged, contact your dealer immediately:

• One Tablet • One Keyboard duck • One touch pen

• One AC adapter • One Warranty card • This manual

Separating your tablet-laptop

1. Set your tablet laptop on a stable surface.

2. Hold the screen and push down the blue latch.

3. Detach the screen by pulling it upward

Layout

Tablet Views

z Front

No.

Name

Function

Microphone

Mainly for

sound and speech recording.

Light sensor

It detects the brightness of the environment.

Front facing

camera

Often for taking self

-portraits as well as for

video

conferencing.

Digital pen

slot

This is where you can rest and charge the

attached digital pen (optional).

Speaker

The sound system has two speakers for playing

music, notification sounds, and other audio data.

Windows

button

Switches the screen between the Start screen

and the previously opened app/program.

I/O cabinet

See page 4 for details.

Touchscreen

It is a see-touch device: You look at it and also

touch it with your fingers to control the tablet.

z Back

No.

Name

Function

Power l

ock

Push here to power on/off or lock on/off your

tablet.

Screen

rotati

lock

Push here to active or cancel t

screen rotating

function

Rear facing

camera

The camera is mainly used when you are taking

photos or recording videos.

Volume up/

down

Press here to increase or decrease the sound

volume.

z Left (I/O cabinet)

No.

Name

Function

HDMI port

This is where you can connect your HDMI

external

screen.

Micro SD card

slot

This is where you can insert a Micro SD memory

card.

Headphone

connector

Here you can plug in a standard headphone.

USB

3.0

port

This is for establishing a USB 3.0 connection.

Power port

This is where you plug in the adapter to charge

your tablet.

SIM card slot

Insert your SIM card here. (See Chapter 4)

z Bottom

No.

Name

Function

Docking

Connector

A connector to the keyboard dock

Keyboard Duck Views

z Connectors and indicators

No.

Name

Function

Docking

Connector

A connector where you docking your tablet.

DC Jack

A jack to connect the AC adapter that supplies

power to the computer.

USB 2.0 port

You can connect a USB 2.0 device here.

Battery

charging

indicator

It lights up in amber when the battery is being

charged, and turns into blue when the battery is

fully charged

z Shortcut keys

You can access certain system settings quickly by pressing the

appropriate function keys.

Press both the Fn key and One of the following shortcut key at the

same time to perform your desired function.

Enable/disable the

Airplane

mode to turn

off/on all wireless

communication

Increase

s the volume

level.

Puts your computer

into sleep mode.

Allows

you to select your

display mode (an external

monitor required)

Mutes/unmutes the

audio output.

Decreases the display

brightness.

Decreases the volume

level.

Increases the display

brightness.

F1 F5

F2 F6

2. Using your

computer

Powering ON/OFF

Powering on your computer

1. If this is the first time you turn this

computer on, connect the AC

adapter and fully charge the

battery.

2. Press the power button.

3. A logo will appear when the

system is powered on.

Powering off your computer

• Save all your data before powering your computer off.

To power off your system, you can do one of the following:

A. By Charms

1. Slightly swipe from the right edge of the screen. This opens the

Charms menu. (For more about the Charms menu, see page 16)

2. Click Settings from the menu, and

you will see a menu as shown on the

right,

3. Click Power icon, and select Shut

down.

B. Using the power button

Press and hold the power button for at least four seconds, and you

will see an instruction appears in the middle of the screen, which is

as shown below.

Slide your finger on the screen downward, and the system will

power off itself.

Putting your tablet into sleep mode

When you will be away from your computer for a short time, put the

computer to sleep.

Do one of the following:

• When the keyboard is attached, close the display panel or press Fn +

F2.

• Press the power button.

• Open the Charms and then select Settings → Power → Sleep.

Waking up your computer

Note: It is recommended that you put your computer to sleep

before you move it. Moving your computer while the hard disk is

spinning can sometimes damage the hard disk, causing loss of

data.

Do one of the following:

• Press the power button.

• Press the Windows button.

Locking or unlock the screen rotation

You can find the rotation lock button on the left end of the

screen, as shown on the left.

A first press on the button can lock the screen to keep it

from rotating when you tilt the tablet. And a second press

can unlock the function.

Basic touch screen operations

The monitor is not only a touch screen, but actually also is a tablet. You

can use your fingers or a touch pen to perform many actions on it.

• Don’t use sharp objects to touch the screen. Or, the screen may be

damaged or scratched.

• Don’t touch the touch screen with a conductive material. It may cause a

malfunction.

• The supported functions are application dependent.

Gesture name

Explanation

Tap

Touch once on an item to start an app, open a

link, or perform an optional function. This is

similar to a left

-click with a mouse.

Double

-tap

Slightly press twice with your finger to select

an item.

Press and hold

Press and leave your finger on an item. This

brings up detailed information or opens a

menu with more options for the item. This is

similar to a right

-click with a mouse.

Pinch

Move two fingers together or apart while

touching the screen. This is to zoom in and

out on visual apps, such as pictures and

maps

Rotate

Place two or more fingers on an item and then

turn

your hand.

This enables you to turn an object. (Note:

Not all items can be rotated, depending upon

the app.)

Slide

Drag your finger across the screen.

This can scroll through lists and pages, and

can also move an object or be used to draw or

write,

depending upon your apps.

Two

-finger-slide

Moves up/down, left/right.

This is

the same

function as scrolling your mouse.

Swipe

Start from any edge of the screen,

and

then

swipe toward the center

of the screen.

Digital pen operations

Your tablet is provided with a touch pen or a

digital pen. With the touch pen, as the one shown

on the right, you can perform all the one-finger

gestures shown in the previous section.

With the digital pen, you can perform not only one-finger gestures, but

also more advanced actions with the buttons on it (if supported by apps).

The digital pen has a battery built in. To

charge your digital pen, you need to

rest it in the digital pen slot, which you

can find on the front right of your tablet.

To put your digital pen into the slot,

make sure the side with the golden

connectors facing the connectors in the

slot.

It takes around 20 seconds to fully charge the digital pen.

3. Windows

Interface

Start Screen

When you turn on the computer, the Start screen is displayed,

which allows you to access many features and installed

applications (also referred to as apps) at one glance.

Apps

These bricks are the shortcuts for respective

applications.

User Account

The currently used user account

Charms

See page 1

6 for detailed information.

1 2

Desktop

In Windows 8.1, the Desktop is treated as an app. You can find and

activate it from your Start screen and All Apps screen.

Task

bar

Allows you to add toolbars that hold extra

buttons and menus

Notification

area

Shows you t

he current

system status and

notifications

Program area

This where you can place a shortcut icon for

your desired application.

Charms

See page 1

6 for detailed information.

Customizing your taskbar

Right-click (or press and

hold using your finger) on a

blank part of the taskbar, a

pop-up menu leaps out. In

the menu, select Toolbars

and offer and you can see

following five toolbar

options:

Address

By choosing this, part of your taskbar becomes a

place for typing website addresses where you want to

visit.

Links

This adds quick access to your favorite websites listed

in your Internet Explorer's Favorites menu.

Touch

Keyboard

This is for

tablet owners and can

add a button that

brings a keyboard to the forefront for touch

typing on

the

screen.

Desktop

This adds quick access to all your PC's resources,

allowing you to browse through files, folders, libraries,

network locations, and Control

Panel menus

without

opening any

menus.

New Toolbar

This lets you create a toolbar from any folder's

contents

The Charms menu

This menu consists of five options that are called charms and provide

quick access to various aspects of Windows 8.1.

To display the Charms, do one of the following:

z Move the pointer to the upper-right or lower-right corner;

z Use one finger to swipe in from the right edge of the screen; or

z Press Windows key + C.

The five charms are:

Search for a program or file. Simply enter a keyword in

the Search charm and start

search.

It also enables you perform a search within an

pp or

on the Web.

This charm is for you to transfer and share a picture or

file with another user.

Start

z If you are not in the Start screen, this a

llows you

to return to the Start screen.

If you are in the Start screen, this allows you to

return to the previously screen, which could be

an app or the Desktop.

Device

This enables you to operate directly a desired device.

You can import pictures from a digital camera, stream

a video to your TV, or transfer files to a device listed

on the screen.

Settings

This charm enables you to perform basic tasks such

as adjusting

the volume, turning off the PC, etc.

All Apps

In the Start screen, touch any blank area and slightly drag upward.

The screen will appear similar to what is as shown below.

Switching back to Start screen

For switching back to the Start screen, do one of the following:

z Move the mouse cursor to the lower-left corner, and click the

Windows icon.

z Press the Windows key on your keyboard or tap the Windows

button on your tablet.

z Click the Windows icon in the Charms bar.

3. Setup and

Connection

Windows Activation

When you turn the computer on for the first time, the Windows activation

screen may appear. Follow the instructions on the screen to register and

active your computer.

If you fail to activate your windows and want to retry again, do the

following:

1. Open the Charms and click Settings > Change PC Settings.

2. Click Activate Windows from the left column.

3. Follow the instructions to activate your windows.

Configuring your Microsoft Account

To share files or settings with other devices running Windows 8, you

need to setup a Microsoft Account.

Furthermore, if you want to download or purchase apps from the

Microsoft Store, such Microsoft Account is required.

To setup a Microsoft account

1. Open the Charms and click Settings > Change PC Settings.

2. Click Users > Your account > Switch to a Microsoft account.

3. Follow the instruction to register your account information.

Setup your Start screen

Adding an App

To add an app:

1. Open the All Apps

screen.

2. Drag the top or bottom

of the screen inward,

and an option menu

appears at the bottom of

the screen.

3. Touch the icon named Customize in the menu.

4. Touch the app that you want to add to your Start screen. The

available options will appear in the right side of the option menu.

5. Click “Pin to Start” to add the app to your Start screen.

Removing an App

To remove an app:

1. In the Start screen or All Apps screen, drag the top or bottom of the

screen inward. An option menu is activated at the bottom of your

screen.

2. Touch the icon named Customize in the menu.

3. Touch the app that you want to remove from the Start screen. The

available options will appear in the right side of the option menu

4. Click “Unpin from Start” to remove it from the Start screen.

Wireless LAN

Enabling wireless connection

To do this, do one of the following:

• Press Fn+F1 to activate the wireless networking function.

• Open the Charms and select Settings to open the Network

configuration page, and then toggle the Airplane mode switch to Off.

To confirm that Airplane mode is disabled,

go to the desktop and check the

notification area. If you see an airplane

icon displayed on the lower right, then

Airplane mode is on. Otherwise, wireless

function is enabled.

Connecting to a wireless LAN

Once the wireless has been enabled, the computer

automatically scans for available wireless networks

and displays them in the wireless LAN network list.

To connect to your desired wireless network, click

the network’s name in the list, and then click

Connect.

Note: Some networks require a network security key or password for

connection. If necessary, ask the network administrator or the Internet

service provider (ISP) for the required information.

Micro SD Card Slot

You can utilize your micro SD cards as removable disks and conveniently

exchange data with digital devices such as a digital camera, digital

camcorder, MP3, etc.

To insert your micro SD card

1. Insert the micro SD card into the

card slot as shown below.

2. Follow the message appears on

the screen, and choose to open

and view files.

3. A Windows Explorer runs and shows all the folders and files in the

micro SD cards, and you can save, move and delete data as you are

handling a storage device.

To remove your memory card

1. Press the card and release. The card will pop up.

2. Pull the card out by holding the end of the card.

Installing the SIM card

To install a SIM card, do the following:

1. Turn off the system

2. Open the cover of the I/O slot

3. Locate the SIM card slot. To locate the SIM card slot, see “Tablet

layout” on page 4.

4. Hold the SIM card with the metal

contacts facing up, and then insert it

firmly into the SIM card slot until you

hear a click.

5. Close the cover back.

To remove the SIM card, after you turn

Attention

: When installing or removing the SIM card, do not touch the

SIM card metal connectors. As a precaution, always hold

your tablet in your hand before you install or remove the

SIM card to avoid electrostatic discharges.

off the tablet, just pull the SIM card out of the slot.

Connecting an External Device

Connecting to the USB port

Your computer comes with two USB ports compatible with USB devices.

The one on the tablet is the latest USB 3.0 port. You can easily identify

the USB 3.0 port by its blue color.

Once you plug a USB device into a USB port on your computer, Windows

automatically loads a driver for that device. After the driver has been

loaded one time, you can disconnect and reconnect the same device

without performing any additional steps.

Note: If Windows requires you to install the driver before connecting.

Check the documentation provided by the device’s manufacturer before

connecting the device.

Before disconnecting a USB storage device, make sure the data

transferring data between your computer and that device has finished.

Click the Safely Remove Hardware icon in the notification area of

Windows to remove the device before disconnecting.

Note: If your USB device uses a power cord, connect the device to a

power source before connecting it.

Connecting to the HDMI port

You can connect an external display device such as a monitor, TV,

projector, etc., only if such device has a HDMI port. By doing so, you

have a wider view when you give a presentation or watch a video or

movie.

1. Power off the external device.

2. Locate the mini-HDMI port on your

computer.

3. Connect the small end of the HDMI

cable to the port, and the other end to

the HDMI port on the external device.

4. Power on the external device.

When connecting a TV, you may need

to configure your TV to external

device mode.

5. Select Charms menu > Devices >

Second Screen. An option menu

appears as shown on the right.

6. Select a desired monitor mode.

4. Battery

Charging your battery

z You can charge your tablet directly

by connecting the adapter to the DC

jack on your tablet and to a wall

socket.

z If you dock the tablet into the keyboard dock, the dock will start to

charge the tablet. In this case,

it is recommended to connect

the dock to a wall socket

using the AC adapter.

While system is off, it takes at least 4hrs to fully charged the battery.

Inspecting your battery status

There are mainly two ways to view your battery status.

By opening the Charms

In the Start screen or Desktop, open the Charms menu. A popup window

shows up at the down-left corner of your screen, as show below.

In the lower-left corner is the battery status icon.

By inspecting the taskbar

In Desktop, move the cursor to the battery icon in the taskbar. A pop-up

dialog box appears and shows you the remaining battery percentage, as

shown below.

Approximate status of your battery

The battery icon reveals the approximate status of your battery, which

describes as below.

Battery is fully charged

Battery is starting to drain

Battery is about to completely

drain, and you should stop using your

tablet and charge it at once.

Battery is being charged.

A battery is an expendable supply, so when using it over a long time, the

capacity/battery life is shortened. If the battery life is reduced to under

half of its initial time, we recommend purchasing a new battery.

When not using the battery for a long time, store the battery after

charging it to 30-40% of its capacity. This extends the battery life time.

5. Windows Help and

Troubleshooting

To know how to use Windows 8 properly, it is better to learn how to

use Windows by utilizing Windows Help.

Windows Help

Move the pointer on the screen to the top or bottom right edge of the

screen to view the Charm menu.

Alternatively, drag the right edge inward with your finger to view the

Charm menu.

Select Charm menu > Settings > Help.

For accessing to the most recent online Help, you need to connect

your computer to the Internet.

Troubleshooting

This section describes some common problems and suggested

solutions, and ways to recover your computer from a crash.

Be aware that the problems and solutions described here are meant

only as a guide. They are not definitive problem solving techniques.

For certain problems, you might need help from your reseller or your

service provider.

When you observe a problem, stop operation immediately, because

taking further action might result in data loss or damage. Take a note

of what the system is doing and what actions you performed before

the problem occurred. Provide detailed information to your service

provider for quicker problem resolution.

For about any problem, follow these steps:

1. Restart your tablet.

2. Check your Wi-Fi connection.

3. Reset your Wi-Fi connection.

4. Plug your tablet to a wall socket to charge it for at least one

hour.

Display problems

When I turn on the

computer,

nothing appears

on the screen.

• If the screen is blank, make sure that:

The AC adapter is connected to the

computer and the power cord is plugged

into a working electrical outlet.

- The computer power is on. (Press the

power button again for confirmati

on.)

• If these items are properly set, and the

screen remains blank, have the computer

serviced.

My screen goes blank while

the computer is on.

• Your power management is enabled. Do

one of the following to resume from sleep

mode:

Press any key on the

keyboard. (Cannot

be used in Tablet mode.)

Press the power button.

Press the Windows button.

Sleep problems

The critical low

battery error

message appears, and the

computer turns off

• The battery power is getting low.

Connect the AC adapter to the computer.

The computer enters sleep

mode immediately after

Power

-on.

• Make sure that

e battery is charged.

The operating temperature

may be too

hot. Move to a cooler environment and try

to wake the computer.

The computer does not

return from sleep mode and

the computer does not

work.

• If your computer is in sleep mode,

connect the AC adapter to the computer,

then press the Windows button or the

power button.

• If your computer is powered

off, connect

the AC adapter to the computer, then

press the

power button to resume

operation.

Display problem

The screen is blank.

• Do the following:

- If you are using the AC adapter, or using

the battery, and the battery status

indicator is on, press F

n+F8

to make the

screen brighter.

If the power indicator

is blinking, press

the power button to resume from sleep

mode.

If the problem persists, follow the

solution in the next problem “The screen is

unreadable or distorted.”

The screen is unreadable or

distorted.

• Make sure that:

The screen resolution and

color quality

are correctly set.

The monitor type is correct.

Incorrect characters appear

on the screen.

• Are the operating system or programs

installed correctly? If they are installed

and configured correctly, have the

computer serviced.

Sound prob

lems

No sound can be heard

from the speaker even

when the volume is turned

up.

• Make sure that:

The Mute function is off.

- The combo audio jack is not being used.

- Speakers are selected as the playback

device.

Recovery system problems

Fail to

restore system

partition to factory default.

• The system partition, such as the

partition size or the drive capacity of C,

has been modified.

Huawei Technologies MU736 HSPA + Module User Manual Manual system

Huawei Technologies Co.,Ltd HSPA + Module Manual system

Contents

User Manual.pdf

Navigation menu

Namespaces

Views

Navigation