Huawei Technologies PBTS3701-2500 WiMAX Pico Base Station User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1025429
Application ID	5+jL7nFUJCMAir8q5zxjCA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	65.49kB (818608 bits)
Date Submitted	2008-11-04 00:00:00
Date Available	2009-04-26 00:00:00
Creation Date	2008-10-10 11:13:47
Producing Software	Antenna House PDF Output Library 2.4.0 (Windows)
Document Lastmod	2008-11-04 14:59:41
Document Title	User Manual
Document Creator	XSL Formatter V4.1 R1 (4,1,2006,1206) for Windows
Document Author:	Huawei Technologies Co., Ltd.

Huawei Proprietary
Copyright © Huawei Technologies Co., Ltd.
1 pBTS3701 User Guide
pBTS3701 User Guide
About This Chapter
Purpose
This guide describes the hardware, installation, commissioning, and maintenance of the
pBTS3701.
Related Versions
The following table lists the product versions related to this document.
Product Name
Version
pBTS3701
V100R002
Intended Audience
The intended audiences of this document are:
BS installer
Administration engineer
System maintenance engineer
Field maintenance engineer
Data configuration engineer
Update History
Issue ()
Version
Update History
01(2008-09-24)
Initial release.
Huawei Proprietary
Copyright © Huawei Technologies Co., Ltd.
1-1
1 pBTS3701 User Guide
Organization
1.1 Introduction to the pBTS3701
The pBTS3701 is a compact integrated indoor BTS. It receives and transmits radio signals to
enable communications between the WiMAX network and the MS/SS.
1-2
Huawei Proprietary
Copyright © Huawei Technologies Co., Ltd.
Issue ()
1 pBTS3701 User Guide
1.1 Introduction to the pBTS3701
The pBTS3701 is a compact integrated indoor BTS. It receives and transmits radio signals to
enable communications between the WiMAX network and the MS/SS.
1.1.1 Components of the pBTS3701
This describes the console, GPS antenna, and power adapter of the pBTS3701.
1.1.2 Physical Structure
The pBTS3701 is a compact integrated indoor BTS, and it is small and exquisite.
1.1.3 Cables of the pBTS3701
This describes the cables of the pBTS3701. The pBTS3701 requires two kinds of cables: the
power cable and the Ethernet cable.
1.1.1 Components of the pBTS3701
This describes the console, GPS antenna, and power adapter of the pBTS3701.
The hardware of the pBTS3701 consists of following parts:
Console
GPS antenna
Power adapter
Console
Figure 1-1 shows the console of the pBTS3701.
Figure 1-1 Console of the pBTS3701
The console of the pBTS3701 is integrated with the clock module, baseband module, IRF
module, OM module, transmission module, and power module.
GPS Antenna
Figure 1-2 shows the GPS antenna of the pBTS3701.
Issue ()
Huawei Proprietary
Copyright © Huawei Technologies Co., Ltd.
1-3
1 pBTS3701 User Guide
Figure 1-2 GPS antenna of the pBTS3701
The GPS antenna of the pBTS3701 is used to receive GPS clock signals, which are used as the
guarantee the synchronization of the pBTS3701.
Power Adapter
Figure 1-3 shows the power adapter of the pBTS3701.
Figure 1-3 Power adapter of the pBTS3701
The power adapter is used to convert 110 or 220 V AC into +12 V DC to supply power to the
pBTS3701.
1.1.2 Physical Structure
The pBTS3701 is a compact integrated indoor BTS, and it is small and exquisite.
Appearance
Figure 1-4 shows the appearance of the pBTS3701.
Figure 1-4 Appearance of the pBTS3701
1-4
Huawei Proprietary
Copyright © Huawei Technologies Co., Ltd.
Issue ()
1 pBTS3701 User Guide
Button
At the top left of the pBTS3701, there is a RST button used to reset the pBTS3701.
Ports
The Figure 1-5 shows the ports of the pBTS3701.
Figure 1-5 Ports of the pBTS3701
Table 1-1 lists the ports of the pBTS3701.
Table 1-1 Ports of the pBTS3701
Label
Type
Number
Description
GPS
SMA
The GPS port is used to receive GPS signals.
ETH
RJ45
The ETH port is used for maintenance and
commissioning.
FE: 10 Mbit/s or 100 Mbit/s
TRAN
RJ45
The TRAN port is a service port which connects to
connect the transmission equipment or gateway
equipment.
FE/GE: 10 Mbit/s or 100 Mbit/s or 1000 Mbit/s
PWR
4Pin socket
The PWR port is a power input port. It supports a
+12 Vdc power input.
TST
USB
Clock test port
LEDs
Figure 1-6 shows the LEDs of the pBTS3701.
Issue ()
Huawei Proprietary
Copyright © Huawei Technologies Co., Ltd.
1-5
1 pBTS3701 User Guide
Figure 1-6 LEDs of the pBTS3701
Table 1-2 lists the LEDs of the pBTS3701.
Table 1-2 LEDs of the pBTS3701
Label
Status
Description
RUN/ALM
ON (red)
An alarm is generated, indicating that the board is running
in the faulty status.
Blinks once
every 0.25
seconds (Green,
ON for 0.125s ,
OFF for 0.125s)
The board is being loaded.
Blinks once
The board is running normally.
every 2 seconds
(Green, ON for
1s , OFF for 1s)
LINK
PWR
OFF
There is no power input, or the board is faulty.
ON (Green)
The pBTS3701 is connected to the network normally.
Blinking
(Green)
The pBTS3701 is in IP packets transmission.
OFF
The pBTS3701 is not connected to the network.
ON (green)
Power supply to the pBTS3701 is functional.
OFF
No power is supplied to the pBTS3701.
1.1.3 Cables of the pBTS3701
This describes the cables of the pBTS3701. The pBTS3701 requires two kinds of cables: the
power cable and the Ethernet cable.
1-6
Huawei Proprietary
Copyright © Huawei Technologies Co., Ltd.
Issue ()
1 pBTS3701 User Guide
1.1.3.1 Power Cable of the pBTS3701
This describes the power cable of the pBTS3701.
1.1.3.2 Ethernet Cable of the pBTS3701
This describes the Ethernet cable of the pBTS3701. The Ethernet cable is used to connect the
pBTS3701 with a LAN switch, through which the connection with the ASN-GW is realized.
The use of Ethernet cable is optional.
Power Cable of the pBTS3701
This describes the power cable of the pBTS3701.
Appearance
As shown in Figure 1-7, one end of the power cable of the pBTS3701 is a three PIN plug, and
the other end is a three PIN female connector.
Figure 1-7 Power cable
Installation Position
The three-PIN plug of the power cable is connected to the socket of mains power supply, and
the other end is connected to the adapter, as shown in Figure 1-8.
Figure 1-8 Connection of the power cable
Ethernet Cable of the pBTS3701
This describes the Ethernet cable of the pBTS3701. The Ethernet cable is used to connect the
pBTS3701 with a LAN switch, through which the connection with the ASN-GW is realized.
The use of Ethernet cable is optional.
Issue ()
Huawei Proprietary
Copyright © Huawei Technologies Co., Ltd.
1-7
1 pBTS3701 User Guide
Appearance
Both ends of the pBTS3701 Ethernet cable are RJ45 connectors, as shown in Figure 1-9.
Figure 1-9 Ethernet cable of the pBTS3701
Pin Assignment
Table 1-3 describes the pin assignment for the wires comprising the pBTS3701 Ethernet cable.
Table 1-3 Pin assignments for the wires of the pBTS3701 Ethernet cable
X1 End
Wire Color
Wire Type
X1 End
X1.2
Orange
X2.2
X1.1
White/orange
Twisted pair
cable
X1.6
Green
X1.3
White/green
X1.4
Blue
X1.5
White/blue
X1.8
Brown
X1.7
White/brown
Twisted pair
cable
Twisted pair
cable
Twisted pair
cable
X2.1
X2.6
X2.3
X2.4
X2.5
X2.8
X2.7
Installation Position
For the Ethernet cable used to transmit user traffic, one end is connected to the TRAN port on
the pBTS3701, and the other end to the LAN switch. For the one used to perform local
maintenance is connected to the ETH port, and the other end to the computer for local
maintenance.
1-8
Huawei Proprietary
Copyright © Huawei Technologies Co., Ltd.
Issue ()

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 10
Page Mode                       : UseOutlines
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:82196004-7b94-43e6-bc25-1e21a5f58bfb
Trapped                         : False
Producer                        : Antenna House PDF Output Library 2.4.0 (Windows)
Modify Date                     : 2008:11:04 14:59:41+08:00
Create Date                     : 2008:10:10 11:13:47+08:00
Metadata Date                   : 2008:11:04 14:59:41+08:00
Creator Tool                    : XSL Formatter V4.1 R1 (4,1,2006,1206) for Windows
Document ID                     : uuid:312ab667-3748-48dd-9ec6-cdc551c46c8e
Format                          : application/pdf
Creator                         : Huawei Technologies Co., Ltd.
Author                          : Huawei Technologies Co., Ltd.

EXIF Metadata provided by EXIF.tools