Huawei Technologies RRU3256-2500 Remote Radio Unit User Manual RRU3252 RRU3256 Hardware Description

Huawei Technologies Co.,Ltd Remote Radio Unit RRU3252 RRU3256 Hardware Description

RRU3256 Hardware Description-EN

DBS3900V100R005C00RRU3252/RRU3256 HardwareDescriptionIssue Draft ADate 2012-11-30HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved.No part of this document may be reproduced or transmitted in any form or by any means without prior writtenconsent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.All other trademarks and trade names mentioned in this document are the property of their respective holders. NoticeThe purchased products, services and features are stipulated by the contract made between Huawei and thecustomer. All or part of the products, services and features described in this document may not be within thepurchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,and recommendations in this document are provided "AS IS" without warranties, guarantees or representationsof any kind, either express or implied.The information in this document is subject to change without notice. Every effort has been made in thepreparation of this document to ensure accuracy of the contents, but all statements, information, andrecommendations in this document do not constitute a warranty of any kind, express or implied. Huawei Technologies Co., Ltd.Address: Huawei Industrial BaseBantian, LonggangShenzhen 518129People's Republic of ChinaWebsite: http://www.huawei.comEmail: support@huawei.comIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.i
About This DocumentPurposeThis document provides reference for planning and deploying an RRU3252/RRU3256 (referredto as RRU in this document). It presents the exterior and describes the ports, functions, cabletypes, connector specifications, and cable connections of the RRU.Product VersionThe following table lists the product version related to this document.Product Name Product VersionDBS3900 LTE TDD V100R005C00 and later versions Intended AudienceThis document is intended for:lBase station installation engineerslSystem engineerslSite maintenance engineersOrganization1 Change HistoryThis chapter describes changes in the RRU3252/RRU3256 Hardware Description.2 RRU IntroductionThis chapter describes the RRU.3 RRU CablesThis chapter describes RRU cables.DBS3900RRU3252/RRU3256 Hardware Description About This DocumentIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.ii
4 RRU Auxiliary DevicesThis chapter describes remote radio unit (RRU) auxiliary devices.ConventionsSymbol ConventionsThe symbols that may be found in this document are defined as follows.Symbol DescriptionIndicates a hazard with a high level of risk, which if notavoided, will result in death or serious injury.Indicates a hazard with a medium or low level of risk, whichif not avoided, could result in minor or moderate injury.Indicates a potentially hazardous situation, which if notavoided, could result in equipment damage, data loss,performance degradation, or unexpected results.Indicates a tip that may help you solve a problem or savetime.Provides additional information to emphasize or supplementimportant points of the main text. General ConventionsThe general conventions that may be found in this document are defined as follows.Convention DescriptionTimes New Roman Normal paragraphs are in Times New Roman.Boldface Names of files, directories, folders, and users are inboldface. For example, log in as user root.Italic Book titles are in italics.Courier New Examples of information displayed on the screen are inCourier New. Command ConventionsThe command conventions that may be found in this document are defined as follows.Convention DescriptionBoldface The keywords of a command line are in boldface.DBS3900RRU3252/RRU3256 Hardware Description About This DocumentIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.iii
Convention DescriptionItalic Command arguments are in italics.[ ] Items (keywords or arguments) in brackets [ ] are optional.{ x | y | ... } Optional items are grouped in braces and separated byvertical bars. One item is selected.[ x | y | ... ] Optional items are grouped in brackets and separated byvertical bars. One item is selected or no item is selected.{ x | y | ... }*Optional items are grouped in braces and separated byvertical bars. A minimum of one item or a maximum of allitems can be selected.[ x | y | ... ]*Optional items are grouped in brackets and separated byvertical bars. Several items or no item can be selected. GUI ConventionsThe GUI conventions that may be found in this document are defined as follows.Convention DescriptionBoldface Buttons, menus, parameters, tabs, window, and dialog titlesare in boldface. For example, click OK.>Multi-level menus are in boldface and separated by the ">"signs. For example, choose File > Create > Folder. Keyboard OperationsThe keyboard operations that may be found in this document are defined as follows.Format DescriptionKey Press the key. For example, press Enter and press Tab.Key 1+Key 2 Press the keys concurrently. For example, pressing Ctrl+Alt+A means the three keys should be pressed concurrently.Key 1, Key 2 Press the keys in turn. For example, pressing Alt, A meansthe two keys should be pressed in turn. Mouse OperationsThe mouse operations that may be found in this document are defined as follows.DBS3900RRU3252/RRU3256 Hardware Description About This DocumentIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.iv
Action DescriptionClick Select and release the primary mouse button without movingthe pointer.Double-click Press the primary mouse button twice continuously andquickly without moving the pointer.Drag Press and hold the primary mouse button and move thepointer to a certain position.DBS3900RRU3252/RRU3256 Hardware Description About This DocumentIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.v
ContentsAbout This Document.....................................................................................................................ii1 Change History..............................................................................................................................12 RRU Introduction..........................................................................................................................22.1 RRU Exterior......................................................................................................................................................32.2 RRU Ports...........................................................................................................................................................42.3 RRU Indicators...................................................................................................................................................53 RRU Cables.....................................................................................................................................83.1 RRU Cable List................................................................................................................................................103.2 RRU PGND Cable............................................................................................................................................113.3 RRU Power Cable............................................................................................................................................123.4 RRU Alarm Cable............................................................................................................................................123.5 CPRI Fiber Optic Cable....................................................................................................................................143.6 RGPS Jumper...................................................................................................................................................173.7 SFP High-Speed Cable for Cascaded RRUs....................................................................................................183.8 RRU RF Jumper...............................................................................................................................................183.9 RRU AISG Multi-Wire Cable..........................................................................................................................193.10 RRU AISG Extension Cable..........................................................................................................................204 RRU Auxiliary Devices..............................................................................................................224.1 IFS06................................................................................................................................................................234.2 OCB..................................................................................................................................................................24DBS3900RRU3252/RRU3256 Hardware Description ContentsIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.vi
1 Change HistoryThis chapter describes changes in the RRU3252/RRU3256 Hardware Description.Draft A (2012-11-30)This is a draft.DBS3900RRU3252/RRU3256 Hardware Description 1 Change HistoryIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.1
2 RRU IntroductionAbout This ChapterThis chapter describes the RRU.The RRU performs the following functions:lExchanges baseband data with a BBU.lReceives RF signals from the antenna system, converts the received signals into IF signals,amplifies the IF signals, and performs analog-to-digital conversion. The TX channel filtersdownlink signals, performs digital-to-analog conversion, and converts IF signals intosignals applicable to the TX band.lMultiplexes RX and TX signals on the RF channel, which enables these signals to sharethe same antenna path. It also filters RX and TX signals.2.1 RRU ExteriorThis section describes the exterior and dimensions of an RRU.2.2 RRU PortsThis section describes ports on the RRU panels. An RRU has a bottom panel, cabling cavitypanel, and indicator panel.2.3 RRU IndicatorsThis section describes six indicators on an RRU. They indicate the running status.DBS3900RRU3252/RRU3256 Hardware Description 2 RRU IntroductionIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.2
2.1 RRU ExteriorThis section describes the exterior and dimensions of an RRU.Figure 2-1 shows an RRU.Figure 2-1 RRU exterior Figure 2-2 shows RRU dimensions.Figure 2-2 RRU dimensions DBS3900RRU3252/RRU3256 Hardware Description 2 RRU IntroductionIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.3
2.2 RRU PortsThis section describes ports on the RRU panels. An RRU has a bottom panel, cabling cavitypanel, and indicator panel.Figure 2-3 shows the ports on the RRU panels.Figure 2-3 Ports on the RRU panels Table 2-1 describes ports and indicators on the RRU panels.DBS3900RRU3252/RRU3256 Hardware Description 2 RRU IntroductionIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.4
Table 2-1 Ports and indicators on the RRU panelsItem Label Description(1) Ports at the bottom ANT0-ANT3 TX/RX ports. ANT0 port supports RET signaltransmission.RET/EXT_ALM Communication port for the RET antenna orport for alarm reporting, supporting RETsignal transmissionRGPS RGPS port, which is optional.(2) Ports in the cablingcavityCPRI0/IR0 Optical portCPRI1/IR1RTN(+) Power supply socketNEG(-)(3) Indicators RUN For details, see 2.3 RRU Indicators.ALMACTVSWRCPRI0/IR0CPRI1/IR1 NOTEIf only two RF ports are required, ANT0 and ANT1 are used by default.The RET ports to be used are determined by the software configuration.2.3 RRU IndicatorsThis section describes six indicators on an RRU. They indicate the running status.For the specific positions of RRU indicators, see 2.2 RRU Ports.Table 2-2 describes RRU indicators.Table 2-2 Indicators on the RRULabel Color Status DescriptionRUN Green Steady on There is power supply, but the moduleis faulty.Steady off There is no power supply, or themodule is faulty.DBS3900RRU3252/RRU3256 Hardware Description 2 RRU IntroductionIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.5
Label Color Status DescriptionBlinking on for 1s and offfor 1sThe module is working properly.Blinking on for 0.125s andoff for 0.125sSoftware is being loaded to themodule, or the module is not started.ALM Red Steady on Alarms are generated, and the modulemust be replaced.Steady off No alarm is generated.Blinking on for 1s and offfor 1sAlarms are generated. The alarmsmay be caused by the faults on therelated modules or ports. Therefore,the necessity for module replacementis uncertain.ACT Green Steady on The module is working properly withTX channels enabled or software isbeing loaded without RRU running.Blinking on for 1s and offfor 1sThe module is working properly withTX channels disabled.VSWR Red Steady off No VSWR alarm is generated.Steady on A VSWR alarm is generated.CPRI0/IR0Red orgreenSteady green The CPRI link is functioningproperly.Steady red An optical module fails to transmit orreceive signals possibly because theoptical module is faulty or the opticalfiber cable is broken.Blinking red on for 1s andoff for 1sThe CPRI link is out of lock possiblybecause of mutual lock of dual-modeclock sources or mismatched datarates over CPRI ports. (You areadvised to check the systemconfiguration to rectify the fault.)Steady off The SFP module is not properlyinstalled, or the optical module ispowered off.CPRI1/IR1Red orgreenSteady green The CPRI link is functioningproperly.Steady red An optical module fails to transmit orreceive signals possibly because theoptical module is faulty or the opticalfiber cable is broken.DBS3900RRU3252/RRU3256 Hardware Description 2 RRU IntroductionIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.6
Label Color Status DescriptionBlinking red on for 1s andoff for 1sThe CPRI link is out of lock possiblybecause of mutual lock of dual-modeclock sources or mismatched datarates over CPRI ports. (You areadvised to check the systemconfiguration to rectify the fault.)Steady off The SFP module is not properlyinstalled, or the optical module ispowered off.DBS3900RRU3252/RRU3256 Hardware Description 2 RRU IntroductionIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.7
3 RRU CablesAbout This ChapterThis chapter describes RRU cables.3.1 RRU Cable ListThis section describes RRU cable connections.3.2 RRU PGND CableAn RRU PGND cable connects an RRU and a ground bar, ensuring the proper grounding of theRRU.3.3 RRU Power CableAn RRU power cable is a -48 V DC shielded cable. It feeds -48 V DC power into an RRU.3.4 RRU Alarm CableAn RRU alarm cable, a shielded straight-through cable, transmits alarm signals from an externaldevice to RRUs so that the base station can monitor the operating status of external devices.3.5 CPRI Fiber Optic CableCPRI fiber optic cables are classified into multi-mode fiber optic cables and single-mode fiberoptic cables. They transmit CPRI signals.3.6 RGPS JumperA PGPS jumper connects a RGPS antenna to an RRU.3.7 SFP High-Speed Cable for Cascaded RRUsThis section describes the SFP high-speed cable for cascaded RRUs. An SFP high-speed cablefor cascaded RRUs connects common public radio interface (CPRI) ports between two RRUsand transmits CPRI signals between RRUs. SFP is short for small form-factor pluggable whileRRU is short for remote radio unit.3.8 RRU RF JumperA 1/2" RRU RF jumper transmits and receives RF signals.3.9 RRU AISG Multi-Wire CableThis section describes a remote radio unit (RRU) AISG multi-wire cable with the length of 5 m.It connects an RRU and a remote control unit (RCU) to transmit control signals from an eNodeBto the remote electrical tilt (RET) antenna. When the RRU is connected to the RET antenna, anAISG multi-wire cable transmits RS485 signals.DBS3900RRU3252/RRU3256 Hardware Description 3 RRU CablesIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.8
3.10 RRU AISG Extension CableThis section describes the remote radio unit (RRU) AISG extension cable. When the distancebetween an RRU and a remote control unit (RCU) is longer than 5 m, an AISG multi-wire cableis not long enough to connect the RRU and the RCU. In this case, an AISG extension cable isused to extend the AISG multi-wire cable for transmitting RS485 signals.DBS3900RRU3252/RRU3256 Hardware Description 3 RRU CablesIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.9
3.1 RRU Cable ListThis section describes RRU cable connections.Table 3-1 lists RRU cables.Table 3-1 RRU cablesCable One End The Other EndConnector Connectedto...Connector Connected to...3.2 RRUPGND CableOT terminal(M6)Groundterminal on theRRUOT terminal(M8)Ground terminalon the ground bar3.3 RRU PowerCableTool-lessfemaleconnector(pressfit type)NEG(-) andRTN(+) portson the RRUTool-less femaleconnector(pressfit type)One of RRU0 toRRU5 ports onthe EPSOT terminal(M4)One of LOAD0to LOAD5 portson the DCDUOne of LOAD4to LOAD9 portson the PDU3.5 CPRI FiberOptic CableDLC connector CPRI0/IR0 porton the RRUDLC connector CPRI port on theLBBP in theBBUCPRI1/IR1 porton the RRUCPRI0/IR0 porton the RRU3.8 RRU RFJumperType NconnectorANT0 to ANT3ports on theRRUType NconnectorAntenna system3.6 RGPSJumper(optional)WaterproofedDB15connectorRemote GlobalPositioningSystem (RGPS)port at the RRUbottomRound 12-pinconnectorRGPS antenna3.7 SFP High-Speed Cablefor CascadedRRUs(optional)SFP20 maleconnectorCPRI1 port onthe RRUSFP20 maleconnectorCPRI0 port onthe RRUDBS3900RRU3252/RRU3256 Hardware Description 3 RRU CablesIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.10
Cable One End The Other EndConnector Connectedto...Connector Connected to...3.4 RRUAlarm Cable(optional)WaterproofedDB9 maleconnectorRET/EXT_ALMport on theRRUCord endterminalExternal alarmdevice3.9 RRU AISGMulti-WireCable(optional)WaterproofedDB9 maleconnectorRET/EXT_ALMport on theRRUStandard AISGfemale connectorStandard AISGmale connectoron the remotecontrol unit(RCU) or on theAISG extensioncable3.10 RRUAISGExtensionCable(optional)Standard AISGmale connectorStandard AISGfemaleconnector onthe AISG multi-wire cableStandard AISGfemale connectorStandard AISGmale connectoron the RCU 3.2 RRU PGND CableAn RRU PGND cable connects an RRU and a ground bar, ensuring the proper grounding of theRRU.ExteriorAn RRU PGND cable is green or green and yellow, both ends of the cable are OT terminals. Ifthe customer prepares the PGND cable, a copper-core cable with a minimum cross-sectionalarea of 16 mm2 (0.025 in.2) is recommended. Figure 3-1 shows a PGND cable.Figure 3-1 PGND cable(1) OT terminal (M6) (2) OT terminal (M8) OT terminals must be added to both ends of a PGND cable onsite.DBS3900RRU3252/RRU3256 Hardware Description 3 RRU CablesIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.11
3.3 RRU Power CableAn RRU power cable is a -48 V DC shielded cable. It feeds -48 V DC power into an RRU.ExteriorAn RRU power cable has an easy power receptacle (pressfit type) connector at one end and barewires at the other end. Proper terminals are added to the bare wires based on the connector onthe external power device, as shown in Figure 3-2.The cross-sectional area of an RRU power cable can be either 3.3 mm2 (0.005 in.2)/5.3 mm2(0.008 in.2) or 4 mm2 (0.006 in.2)/6 mm2 (0.009 in.2). The former complies with North Americanstandards and the latter complies with European standards.Figure 3-2 RRU power cable Pin AssignmentThe DC power input cable is a two-wire cable. Table 3-2 and Table 3-3 describe the pinassignment for the wires of a DC power input cable.Table 3-2 Pin assignment for the wires of a DC power input cable (North American standards)Wire ColorNEG(-) BlueRTN(+) Black Table 3-3 Pin assignment for the wires of a DC power input cable (European standards)Wire ColorNEG(-) BlueRTN(+) Brown 3.4 RRU Alarm CableAn RRU alarm cable, a shielded straight-through cable, transmits alarm signals from an externaldevice to RRUs so that the base station can monitor the operating status of external devices.DBS3900RRU3252/RRU3256 Hardware Description 3 RRU CablesIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.12
ExteriorAn alarm cable has a DB9 connector at one end and eight cord end terminals at the other end,as shown in Figure 3-3.Figure 3-3 RRU alarm cable(1) DB9 waterproof connector (2) Cord end terminal Pin AssignmentTable 3-4 describes the pin assignment for the wires of an RRU alarm cable.Table 3-4 Pin assignment for the wires of an RRU alarm cableRRUAlarmPortPin of theDB9ConnectorWireColorWireTypeCord EndTerminalDescriptionDrycontactX1.2 White orblueTwistedpair cableX2 Boolean signal input 0+X1.4 Blue X3 Boolean signal input 0-(GND)X1.7 White ororangeTwistedpair cableX4 Boolean signal input 1+X1.4 Orange X5 Boolean signal input 1-(GND)RS485 X1.6 White orgreenTwistedpair cableX6 APM RX-X1.8 Green X7 APM RX+X1.5 White orbrownTwistedpair cableX8 APM TX-X1.3 Brown X9 APM TX+ DBS3900RRU3252/RRU3256 Hardware Description 3 RRU CablesIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.13
3.5 CPRI Fiber Optic CableCPRI fiber optic cables are classified into multi-mode fiber optic cables and single-mode fiberoptic cables. They transmit CPRI signals.NOTElAn ODF can be used when the distance between a BBU and an RRU or the distance betweeninterconnected RRUs is longer than 100 m (328.08 ft).lA single-mode fiber optic cable connects a BBU to an ODF or connects an ODF to an RRU.The maximum length of a CPRI fiber optic cable is 150 m (492.12 ft) When the fiber opticalcable connects a BBU and an RRU. The length of a CPRI fiber optic cable is 10 m (32.81 ft)when the fiber optical cable connects two RRUs.ExteriorFigure 3-4 shows a fiber optic cable between a BBU and an RRU or between RRUs, with aDLC connector at each end.Figure 3-4 Fiber optical cable between a BBU and an RRU or between RRUs(1) DLC connector (2) Branch optical fiber (3) Label on the branch optical fiber When a fiber optical cable connects a BBU and an RRU, the optical fibers on the BBU side andRRU side are 0.34 m (0.013 in.) and 0.03 m (0.0012 in.) long, respectively. When a fiber opticalcable connects two RRUs, the optical fibers on both RRU sides are 0.03 m (0.0012 in.) long.Figure 3-5 shows the connections for a CPRI fiber optic cable between a BBU and an RRU.DBS3900RRU3252/RRU3256 Hardware Description 3 RRU CablesIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.14
Figure 3-5 Connections for a CPRI fiber optic cable between a BBU and an RRU(1) CPRI fiber optic cable between a BBU and an RRUFigure 3-6 shows a single-mode fiber optic cable between a BBU and an ODF or between anODF and an RRU, with a DLC connector at one end and an FC connector at the other end.Figure 3-6 Single-mode fiber optic cable between a BBU and an ODF or between an ODF andan RRU(1) DLC connector (2) Branch optical fiber(3) Label on the branch optical fiber (4) FC connector When a single-mode fiber optic cable connects a BBU and an ODF, the optical fibers on theBBU side and ODF side are 0.34 m (0.013 in.) and 0.8 m (0.031 in.) long, respectively.When a single-mode fiber optic cable connects an ODF and an RRU, the optical fibers on theRRU side and ODF side are 0.03 m (0.013 in.) and 0.8 m (0.031 in.) long, respectively.Figure 3-7 shows the connections for a single-mode CPRI fiber optic cable between a BBU andan ODF or between an ODF and an RRU.DBS3900RRU3252/RRU3256 Hardware Description 3 RRU CablesIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.15
Figure 3-7 Connections for a single-mode fiber optic cable between a BBU and an ODF orbetween an ODF and an RRU(1) Single-mode CPRI fiber optic cable between a BBUand an ODF(2) Single-mode CPRI fiber optic cable between anODF and an RRUNOTEA CPRI fiber optic cable must be connected to optical modules in the CPRI ports. A multi-mode fiber opticcable and single-mode fiber optic cable are connected to multi-mode optical modules and single-mode opticalmodules, respectively.Pin AssignmentTable 3-5, Table 3-6, and Table 3-7 describe the labels on and recommended connections forfiber optic cables of an optical assembly.Table 3-5 Labels on and recommended connections for optical fibers of an optical assemblybetween a BBU and an RRULabel Connected To1A CPRI RX port on the RRU1B CPRI TX port on the RRU2A TX port on the BBU2B RX port on the BBU Table 3-6 Labels on and recommended connections for optical fibers of a fiber optic cablebetween RRUsLabel Connected To1A CPRI RX port on RRU 11B CPRI TX port on RRU 1DBS3900RRU3252/RRU3256 Hardware Description 3 RRU CablesIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.16
Label Connected To2A CPRI TX port on RRU 02B CPRI RX port on RRU 0 Table 3-7 Labels on and recommended connections for optical fibers of a single-mode opticalassembly between a BBU and an ODF or between an ODF and an RRULabel Connected To1A RX port on the BBU or CPRI RX port on the RRU1B TX port on the BBU or CPRI TX port on the RRU2A ODF2B ODF 3.6 RGPS JumperA PGPS jumper connects a RGPS antenna to an RRU.ExteriorA RGPS jumper has a DB15 waterproof connector at one end and a round 12–pin connector atthe other end, as shown in Figure 3-8.Figure 3-8 RGPS jumper(1) DB15 waterproof connector (2) Round 12-pin connector Pin AssignmentTable 3-8 describes the pin assignment for the wires of the RGPS jumper.DBS3900RRU3252/RRU3256 Hardware Description 3 RRU CablesIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.17
Table 3-8 Pin assignment for the wires of the RGPS jumperX1 (Pin for theDB15 WaterproofConnector)X2 (Pin for theRound 12-pinConnector)Color Type DescriptionX1.1 X2.9 White andblue TwistedpairGNDX1.6 X2.1 Blue +28 VX1.14 X2.5 White andorange TwistedpairRXD_422+X1.13 X2.4 Orange RXD_422-X1.12 X2.3 White andgreenTwistedpairTXD_422+X1.11 X2.2 Green TXD_422-X1.2 X2.11 White andbrownTwistedpair1PPS_422+X1.7 X2.12 Brown 1PPS_422- 3.7 SFP High-Speed Cable for Cascaded RRUsThis section describes the SFP high-speed cable for cascaded RRUs. An SFP high-speed cablefor cascaded RRUs connects common public radio interface (CPRI) ports between two RRUsand transmits CPRI signals between RRUs. SFP is short for small form-factor pluggable whileRRU is short for remote radio unit.ExteriorFigure 3-9 shows an SFP high-speed cable for cascaded RRUs.Figure 3-9 SFP high-speed cable for cascaded RRUs 3.8 RRU RF JumperA 1/2" RRU RF jumper transmits and receives RF signals.DBS3900RRU3252/RRU3256 Hardware Description 3 RRU CablesIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.18
ExteriorAn RF jumper has a Type N male connector at both ends, as shown in Figure 3-10.Figure 3-10 RF jumper(1) Type N male connector 3.9 RRU AISG Multi-Wire CableThis section describes a remote radio unit (RRU) AISG multi-wire cable with the length of 5 m.It connects an RRU and a remote control unit (RCU) to transmit control signals from an eNodeBto the remote electrical tilt (RET) antenna. When the RRU is connected to the RET antenna, anAISG multi-wire cable transmits RS485 signals.NOTEAn RCU is a driving motor used for the phase shifter in the RET antenna. It receives control commands froman eNodeB and runs the commands to drive the stepper motor. Using a gear, the stepper motor drives theadjustable phase shifter in the antenna and changes the downtilt angle.ExteriorAn AISG multi-wire cable has a waterproofed DB9 male connector at one end and a standardAISG female connector at the other end, as shown in Figure 3-11.Figure 3-11 AISG multi-wire cable1. DB9 waterproof male connector 2. Standard AISG female connector DBS3900RRU3252/RRU3256 Hardware Description 3 RRU CablesIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.19
Pin AssignmentTable 3-9 describes the pin assignment for the core wires of an AISG multi-wire cable.Table 3-9 Pin assignment for the core wires of an AISG multi-wire cableX1 End (Pin of theWaterproofedDB9 MaleConnector)X2 End (Pin of theStandard AISGFemale Connector)Color ofthe CoreWireType ofthe CoreWireDescriptionX1.1 X2.1White andblue Twistedpair +12 VBlueX1.3 X2.3 White andorange TwistedpairRS485 BX1.5 X2.5 Orange RS485 AX1.4 X2.4 White andgreen- GNDX1.9 is connected toX1.4.- - - GND- X2.1 is connected toX2.6.- - +12 V- X2.4 is connected toX2.7.- - GND 3.10 RRU AISG Extension CableThis section describes the remote radio unit (RRU) AISG extension cable. When the distancebetween an RRU and a remote control unit (RCU) is longer than 5 m, an AISG multi-wire cableis not long enough to connect the RRU and the RCU. In this case, an AISG extension cable isused to extend the AISG multi-wire cable for transmitting RS485 signals.ExteriorAn AISG extension cable has a standard AISG male connector at one end and a standard AISGfemale connector at the other end, as shown in Figure 3-12.DBS3900RRU3252/RRU3256 Hardware Description 3 RRU CablesIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.20
Figure 3-12 AISG extension cable1. Standard AISG male connector 2. Standard AISG female connector Pin AssignmentTable 3-10 describes the pin assignment for the core wires of an AISG extension cable.Table 3-10 Pin assignment for the core wires of an AISG extension cableX1 End (Pinof theStandardAISG MaleConnector)X2 End (Pinof theStandardAISGFemaleConnector)Color of theCore WireType of theCore WireDescriptionX1.1 X2.1 White and blue Twisted pair +12 VBlueX1.7 X2.7 White and orange Twisted pair DC Return AOrangeX1.3 X2.3 White and green Twisted pair RS485 BX1.5 X2.5 Green RS485 AX1.6 X2.6 White and brown Twisted pair +24 VBrown DBS3900RRU3252/RRU3256 Hardware Description 3 RRU CablesIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.21
4 RRU Auxiliary DevicesAbout This ChapterThis chapter describes remote radio unit (RRU) auxiliary devices.4.1 IFS06An Indoor Floor installation Support (IFS06) is used for installing indoor RRUs.4.2 OCBAn Outdoor Cable Conversion Box (OCB) interconnects cables of different core diameters.Power cables shipped with RRUs cannot support long-distance power supply. Therefore, whenpower supply is far from the equipment, cables with large core diameters are used, and an OCBconnects these cables and RRU power cables.DBS3900RRU3252/RRU3256 Hardware Description 4 RRU Auxiliary DevicesIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.22
4.1 IFS06An Indoor Floor installation Support (IFS06) is used for installing indoor RRUs.ExteriorFigure 4-1 shows an IFS06.Figure 4-1 IFS06 FunctionlIt can be installed on the ground.lThe upper and lower adjustable beams on an IFS06 can be moved up and down to fit forheights of RRUs.StructureThe IFS06 consists of the main frame, cable tray, upper and lower adjustable beams, and frontand rear feet, as shown in Figure 4-2.DBS3900RRU3252/RRU3256 Hardware Description 4 RRU Auxiliary DevicesIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.23
Figure 4-2 IFS06 structure(1) Upper adjustable beam (2) Main frame (3) Lower adjustable beam(4) Front foot (5) Rear foot (6) Cable tray SpecificationsTable 4-1 describes IFS06 specifications.Table 4-1 IFS06 specificationsItem SpecificationDimensions 1730 mm (79 in.) x 600 mm (23.62 in.) x 600 mm (23.62 in.)(H x W x D)Weight 45 kg (99.23 lb) 4.2 OCBAn Outdoor Cable Conversion Box (OCB) interconnects cables of different core diameters.Power cables shipped with RRUs cannot support long-distance power supply. Therefore, whenpower supply is far from the equipment, cables with large core diameters are used, and an OCBconnects these cables and RRU power cables.DBS3900RRU3252/RRU3256 Hardware Description 4 RRU Auxiliary DevicesIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.24
Application Scenario of an OCBFigure 4-3 shows the application scenario of an OCB.Figure 4-3 Application scenario of an OCB For details about the structure, functions, installation, and maintenance of an OCB, see the OCBUser Guide.DBS3900RRU3252/RRU3256 Hardware Description 4 RRU Auxiliary DevicesIssue Draft A (2012-11-30) Huawei Proprietary and ConfidentialCopyright © Huawei Technologies Co., Ltd.25

Navigation menu