Huawei Technologies U526 WCDMA/GPRS/GSM Mobile Phone User Manual confidentiality letter

Huawei Technologies Co.,Ltd WCDMA/GPRS/GSM Mobile Phone confidentiality letter

Exhibit 08 User Manual

Download:
Mirror Download [FCC.gov]
Document ID	609864
Application ID	AkEAysXeuhKkNPUvwWmWNQ==
Document Description	Exhibit 08 User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	87.34kB (1091798 bits)
Date Submitted	2005-12-08 00:00:00
Date Available	2005-12-08 00:00:00
Creation Date	2005-11-13 16:55:24
Producing Software	pdfFactory Pro 2.25 (Windows XP Chinese)
Document Lastmod	0000-00-00 00:00:00
Document Title	confidentiality letter.doc
Document Creator	pdfFactory Pro www.fineprint.com.cn
Document Author:	d24418

Wonderful Communication, Mobile Life.
Welcome to use U526 Handset from Huawei Technologies Co., Ltd.
HUAWEI U526 Handset
User manual
Copyright © 2005 Huawei Technologies Co., Ltd.
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form or by any
means without prior written consent of Huawei Technologies Co., Ltd.
Trademarks
and HUAWEI are trademarks of Huawei Technologies Co., Ltd. All other
trademarks mentioned in this manual are the property of their respective holders.
Notice
The information in this manual is subject to change without notice. Every effort has
been made in the preparation of this manual to ensure accuracy of the contents, but
all statements, information, and recommendations in this manual do not constitute the
warranty of any kind, expressed or implied.
Huawei Technologies Co., Ltd.
Address: Administration Building, Huawei Technologies Co., Ltd.,
Bantian, Longgang District, Shenzhen, P. R. China
Postal Code: 518129
Website: http://www.huawei.com
Safety Precautions
Please read the safety precautions carefully to ensure the correct and safe use of your
wireless device. For detailed information, see the section of “Warnings and Precautions”.
Do not switch on your phone when it is prohibited to use mobile
phones or when the phone may cause interference or danger.
Do not use your phone while driving.
Follow any rules or regulations in hospitals and health care facilities.
Switch off your phone near medical apparatus.
Switch off your phone in aircraft. The phone may cause interference to
control signals of the aircraft.
Switch off your phone near high-precision electronic devices. The
phone may affect the performance of these devices.
Do not attempt to disassemble your phone or its accessories. Only a
qualified personnel is allowed to service or repair the phone.
Do not place your phone and its accessories in containers with strong
electromagnetic field.
Do not place magnetic storage media near your phone. Radiation from
the phone may erase the information stored on them.
Do not put your phone in a high-temperature place or use it in a place
with flammable gas such as a gas station.
Keep your phone and its accessories away from children. Do not allow
children to use your phone without guidance.
Use approved batteries and chargers only to avoid explosions.
Observe any laws or regulations on the use of wireless device. Respect
others’ privacy and legal rights when using your wireless device.
Operate strictly abiding by the relevant descriptions on page 1 of this
manual while using the USB cable. Otherwise, your phone or PC may
be damaged.
Table of Contents
1 Getting to Know Your Phone ........................................................................................... 1
Packing List.............................................................................................................. 1
Your Phone ............................................................................................................... 1
2 Getting Started ................................................................................................................ 1
Loading the Battery................................................................................................... 1
Unload the Battery .................................................................................................... 1
Charging the Battery ................................................................................................. 1
Loading the USIM Card ............................................................................................ 1
Loading and Removing a Memory Card..................................................................... 1
Switching On/Off...................................................................................................... 1
3 Call Services................................................................................................................... 1
Making and Answering Calls..................................................................................... 1
Operations during a Call............................................................................................ 1
4 Text Entry....................................................................................................................... 1
“Abc” Text Input....................................................................................................... 1
T9 Text Input ............................................................................................................ 1
“123” Numeric Input................................................................................................. 1
HUAWEI
Table of Contents
Symbol Input ............................................................................................................ 1
5 Using the Menu Functions............................................................................................... 1
6 Contacts.......................................................................................................................... 1
Viewing Details......................................................................................................... 1
Searching for a Contact Entry.................................................................................... 1
Adding a New Contact Entry..................................................................................... 1
Deleting a Contact Entry ........................................................................................... 1
Copying a Contact Entry ........................................................................................... 1
Mark All ................................................................................................................... 1
Unmark All............................................................................................................... 1
Sending a Contact Entry............................................................................................ 1
Viewing Memory Status ............................................................................................ 1
My Business Card ..................................................................................................... 1
Backup Contacts ....................................................................................................... 1
Restore Contacts ....................................................................................................... 1
Speed Dialing Numbers............................................................................................. 1
Groups...................................................................................................................... 1
7 Call Log.......................................................................................................................... 1
Missed Calls ............................................................................................................. 1
Received Calls .......................................................................................................... 1
Dialed Calls .............................................................................................................. 1
ii
HUAWEI
Table of Contents
8 Messaging ...................................................................................................................... 1
Creating Text Messages............................................................................................. 1
Creating Multimedia Messages.................................................................................. 1
Text Message (SMS) ................................................................................................. 1
Multimedia Message (MMS) ..................................................................................... 1
New Postcard............................................................................................................ 1
Push Inbox................................................................................................................ 1
Settings..................................................................................................................... 1
9 Multimedia ..................................................................................................................... 1
Camera ..................................................................................................................... 1
Video Camera ........................................................................................................... 1
Voice Recorder.......................................................................................................... 1
Viewing Images ........................................................................................................ 1
Playing Video ........................................................................................................... 1
Playing Music........................................................................................................... 1
Stream Media............................................................................................................ 1
10 Organiser & Tools ......................................................................................................... 1
STK.......................................................................................................................... 1
Calendar ................................................................................................................... 1
To Do ....................................................................................................................... 1
HUAWEI
iii
Table of Contents
Memo Pad ................................................................................................................ 1
Alarm Clock ............................................................................................................. 1
Calculator ................................................................................................................. 1
World Time............................................................................................................... 1
Stopwatch ................................................................................................................. 1
Timer........................................................................................................................ 1
Unit Converter .......................................................................................................... 1
Currency Converter................................................................................................... 1
Service Dial Number................................................................................................. 1
11 My Files ....................................................................................................................... 1
Images ...................................................................................................................... 1
Music ....................................................................................................................... 1
Videos ...................................................................................................................... 1
eBook ....................................................................................................................... 1
Personal.................................................................................................................... 1
Memory Card............................................................................................................ 1
12 Vodafone Live! (Browser) ............................................................................................. 1
Homepage................................................................................................................. 1
Bookmarks ............................................................................................................... 1
Go to URL................................................................................................................ 1
Saved pages .............................................................................................................. 1
iv
HUAWEI
Table of Contents
Push Inbox................................................................................................................ 1
Select Profile ............................................................................................................ 1
13 Stream Media................................................................................................................ 1
Playing Stream Media Files ....................................................................................... 1
Operations during Playing Stream Media Files........................................................... 1
Operations on URL Files ........................................................................................... 1
14 V-Call ........................................................................................................................... 1
Introduction to the Screen Functions.......................................................................... 1
Function Options....................................................................................................... 1
15 Connections .................................................................................................................. 1
USB ......................................................................................................................... 1
Notes to the Functions of the Connections.................................................................. 1
Data Account ............................................................................................................ 1
16 Entertainment................................................................................................................ 1
Applications & Games .............................................................................................. 1
Download More ........................................................................................................ 1
Memory Status.......................................................................................................... 1
17 DRM ............................................................................................................................ 1
18 Settings......................................................................................................................... 1
Call Forwarding ........................................................................................................ 1
HUAWEI
Table of Contents
Phone Setup.............................................................................................................. 1
Profiles ..................................................................................................................... 1
Wallpaper ................................................................................................................. 1
Colour Themes.......................................................................................................... 1
Connect .................................................................................................................... 1
Video Call Setup ....................................................................................................... 1
Call Setup ................................................................................................................. 1
Network Setup .......................................................................................................... 1
Security Setup........................................................................................................... 1
19 Warnings and Precautions.............................................................................................. 1
Electronic Device...................................................................................................... 1
Hospital .................................................................................................................... 1
Area with flammables and Explosives........................................................................ 1
Traffic Safety ............................................................................................................ 1
Storage Environment................................................................................................. 1
Children Safety ......................................................................................................... 1
Operating Environment ............................................................................................. 1
Cleaning and Maintenance......................................................................................... 1
Emergency Call......................................................................................................... 1
Battery...................................................................................................................... 1
Charger..................................................................................................................... 1
vi
HUAWEI
Table of Contents
Using the USB Cable ................................................................................................ 1
Rules for Exposure to Radio Frequency Energy.......................................................... 1
Environmental Protection .......................................................................................... 1
20 Abbreviations and Acronyms ......................................................................................... 1
HUAWEI
vii
1
Getting to Know Your Phone
Your U526 can operate in WCDMA 2100 and GSM/GPRS 900/1800. It can switch from a
network to another automatically. So you can enjoy the mobile telecommunication services at
any time.
Note:
The services supported by your phone must be supported by the network where your
phone is in. For details, please consult your local network operator.
Packing List
Your phone package box contains the following articles:
One U526 mobile phone
One cable charger
One Li-polymer battery
One USB data cable
One stereo headset
One hand strap
One user manual
One CD-ROM disk which contains HUAWEI U526 MOBILE PHONE PC Assistant
HUAWEI
1 Getting to Know Your Phone
Your Phone
Front View and Back View
Earpiece
Camera
Screen
Scroll key
Left function key
Quick menu/Option key
Send key
Right function key
OK key
Browser shortcut key
Power/End key
Clear/Return key
Character/Number keys
Microphone
Charger connector/Cable connector
HUAWEI
1 Getting to Know Your Phone
Strap hole
Battery latch
External screen
Battery
Camera
Side View
Headset jack
Volume key
Record key
Memory card slot
HUAWEI
1 Getting to Know Your Phone
Key-board View
Scroll key
Left function key
Quick menu/Option key
Send key
Right function key
OK key
Browser shortcut key
Power/End key
Clear/Return key
Character/Number keys
Microphone
Charger connector/Cable connector
Keys
Key
HUAWEI
Description
Making or answering a call.
In standby mode, press this key to access the Call Log screen.
Press this key to end an ongoing call or reject an incoming call.
When it is not on Home screen, press this key to return to the Home
screen.
Press and hold this key to power on; or press and hold it to turn
power off in standby mode.
It is a clear key when in editing mode. Press it to delete a character
before the cursor. However, when you press and hold it down for a
moment, you will clear all the characters you have entered.
Go back to the previous level menu.
1 Getting to Know Your Phone
Key
Description
Press it to activate the function indicated at the left of the prompt bar
on the screen.
l In standby mode, press it to access the Messaging screen.
l Press it to activate the function indicated on the right of the prompt
bar on the home screen.
l In standby mode, press it to access the Browser homepage screen.
l In standby mode, press it to access the Quick Menu screen.
l On an option list screen, press it to check the checkboxes to the right
of the options.
In standby mode, press it to access the Bookmarks screen.
Press it to start the prompt functions on the middle of the prompt bar
on the screen.
l In standby mode, press it to access the main menu.
Up:
l On a menu or on a mode selection screen, press it to scroll upward.
l In standby mode, press it to access the Browser homepage screen.
Down:
l On a menu or on a mode selection screen, press it to scroll downward.
l In standby mode, press it to access the Contacts screen.
Left:
l On a menu or on a mode selection screen, press it to scroll leftward.
l In standby mode, press it to access the Camera screen.
Right:
l On a menu or on a mode selection screen, press it to scroll rightward.
l In standby mode, press it to access the My Files menu.
HUAWEI
1 Getting to Know Your Phone
Key
Character/
Number keys
Description
Used to enter numbers or characters.
When menu items are numbered, press one of them to access a corresponding menu item.
On the main menu screen, press a Character/Number key to access a
menu whose location on the screen corresponds to that of the key.
For instance, you can press
Record
key/Camera
shortcut key
Volume key
HUAWEI
to access the Entertainment
to access the Browser homepage screen.
screen, or
In standby mode with the flip opened, press and hold it for a moment
to activate the camera.
During a call, press it to activate the voice recorder.
In standby mode with the phone folded, press and hold it to start
recording, and press it again to end the recording.
In standby mode with the phone folded, press it to activate the external screen and display relevant information.
During charging with power is off and the flip closed, pressing it
relevant information appears on the external screen, and pressing it
again the power level of the battery in percentage mode is displayed.
In standby mode or during a call, press it to adjust the volume of the
earpiece.
In standby mode with the phone folded, press it to activate the external screen and display relevant information.
During charging with power is off and the flip closed, pressing it the
battery power level is displayed in a percentage mode on the external
screen.
1 Getting to Know Your Phone
Home Screen
Icon bar
Desktop
Prompt bar
Icon bar
This bar displays the phone status. The following table illustrates all the icons that may appear on this bar.
HUAWEI
1 Getting to Know Your Phone
Icon
Description
Indicating signal strength. The more horizontal bars indicate the stronger
signal.
The current network is a GSM.
It is in WCDMA currently.
You are using the roaming service.
Internet connection status
Security connection
In a call
Alarm clock is enabled.
You have one or several new text messages.
You have one or several PUSH messages.
You have one or several new multimedia messages.
The vibration mode is enabled.
In mute mode
Call line 1 is enabled currently.
Forwarding all incoming voice calls on line 1
Call line 2 is enabled currently.
Forwarding all incoming voice calls on line 2
The headset is plugged in.
Your PC is connected to the Internet via your phone.
Indicating battery power level. The more bars indicate more power.
HUAWEI
1 Getting to Know Your Phone
Desktop
This field displays the options of the operations and functions.
Prompt Bar
This field displays the currently available operations. The content displayed here differs according to the content of the screen.
Press
to execute the operation indicated on the left of the prompt bar.
Press
to execute the operation indicated on the right of the prompt bar.
Press
to execute the operation indicated in the middle of the prompt bar.
HUAWEI
2
Getting Started
Loading the Battery
To load the battery:
1. Fit the battery into the battery slot on back of the phone.
2. Press the battery down until it clicks into place.
Unload the Battery
Always unload the battery after your phone is switched off. Otherwise, your phone may be
damaged.
To unload the battery:
HUAWEI
11
2 Getting Started
1. Push the battery latch upward.
2. Take out the battery.
Charging the Battery
Before charging the battery, please read carefully the following precautions.
12
HUAWEI
2 Getting Started
Caution:
When you charge the battery for the first time, please charge it for at least 12
hours.
l The battery discharges if you do not use it for a long time, please charge it before
you use it again.
l The charging time depends on the environmental temperature and the age of the
battery.
l The battery can be recharged repeatedly, but it will eventually wear out. After
normal charging, if the time that the battery powers your phone becomes much
shorter than usual, please replace the battery with one of the same type.
l Do not strike or shock violently the battery or toss it; otherwise, liquid leakage,
body damage, overheating, explosion or fire may occur to the battery.
l Charge the battery by using the charger supplied with your phone.
You can charge the battery at any time you want. And you can use your phone during charging.
When you charge the battery with your phone powering on, the battery level icon will
appear on the upper right corner of your phone screen. In battery charging, the horizontal
bars of the icon will blink continuously. When the horizontal bars fill up the whole icon
and the icon stops blinking, it indicates that the charging is completed.
During charging with your phone powering off, a cylinder icon indicating the power level
of the battery will appear on the screen and will blink continuously. When the cylinder is
filled and stops blinking, it indicates that the charging is completed.
Note:
When the battery power level is very low, the phone makes alarm sounds and displays corresponding prompt boxes regularly. When the battery power level is too low
to support normal operation of the phone, the phone will switch off automatically.
HUAWEI
13
2 Getting Started
Charging with a Cable Charger
Before charging the battery with a cable charger, please make sure that the battery has been
properly loaded into your phone.
To charge the battery:
1. Plug in the connector of the charger into an electrical outlet.
2. As shown in the following figure: Insert the plug of the charger into the connector of the
phone. Before the insertion, please check whether the arrow on the charger output jack
points to the front side of the phone.
3. After charging, please pull out the charger plug from the AC socket at first, and then
press and hold the gray buttons on the two sides of the charger output jack and pull out
the charger plug from the phone.
14
HUAWEI
2 Getting Started
Loading the USIM Card
Your USIM card contains such information as phone numbers and contacts. Load your USIM
card before using your phone. To use the USIM card properly, please read carefully the following instructions:
Note:
Put the USIM card in a place that is unreachable for a child.
The USIM card and the metal contactors are easily damaged by scratch or bend. So
be careful when you carry, load or remove it.
Always disconnect the charger from the phone before loading or removing the
USIM card.
Loading the USIM Card
To load the USIM card:
1. Switch off the phone and remove the battery.
2. Put the card at the card slot entrance. Be aware of the direction of the card.
3. Slide the USIM card into the card slot as shown in the following figure.
HUAWEI
15
2 Getting Started
Removing the USIM Card
To remove it, follow the procedures reversed to those when the USIM card is loaded.
Loading and Removing a Memory Card
The U526 phone supports a memory card (SD) with a maximum of 512MB.
1. Remove the rubber cap from the memory card slot; then insert the memory card into the
slot, as shown in the following figure.
2. After inserting the memory card completely, put on the rubber cap again.
16
HUAWEI
2 Getting Started
3. To remove a memory card, open the rubber cap and press the memory card gently. Now
the memory card will pop up automatically. Then take it out as shown in the following
figure.
Switching On/Off
Switching On
Ensure that the USIM card is in your phone and that the battery has been charged.
HUAWEI
17
2 Getting Started
Press and hold
until power is on.
Switching Off
Press and hold
until power is off.
Access Codes
If you have set the phone password, PIN to be ON, then you have to enter the corresponding
access codes when you switch on your phone. For setting and changing the access codes,
please refer to “Settings/Security Setup” on page 1.
Phone Password
The phone password is used to protect your phone from unauthorized use. The phone password is preset as 0000 for a U526 phone.
PIN
The PIN (Personal Identification Number) code is used to protect your USIM card from unauthorized use. Usually you are supposed to get the PIN code when you get the card from
your USIM card provider. If you have not got or you have lost it, please consult your service
provider.
PIN 2
Some USIM cards provide PIN 2 code. Some special functions such as the “Fixed Dialer
Number” are not available until you enter the PIN 2 code and, at the same time, your USIM
card must support these functions.
PUK
To unlock the locked USIM card, you have to enter the PUK (PIN Unblocking Key) code.
Usually you are supposed to get the PUK code when you get the card from your USIM card
18
HUAWEI
2 Getting Started
provider. If you have not got or you have lost it, please consult your service provider.
PUK 2
Some USIM cards provide PUK 2 code which is used to unlock the locked PIN 2 code. Usually you are supposed to get the PUK 2 code when you get the card from your USIM card
provider. If you have not got or you have lost it, please consult your service provider.
HUAWEI
19
3
Call Services
Making and Answering Calls
Making Video Calls
With the video call function, you can use your U526 to make video calls. To make such a call,
the phone you are calling must be capable of video calls.
HUAWEI
21
3 Call Services
Step
Operation
Enter a phone number by the keypad, and then choose V-Call to dial out.
Select a number from the call logs lists, and press
number screen. Then, choose V-Call to dial out.
to access the Edit
Note:
To correct a wrong input number, just press
. Pressing once you
can delete the digit in front of the cursor; pressing and holding
you can delete the whole number.
Maybe you have to wait for a moment to get through a video call. The
time you need to wait also depends on the response time of the other
party.
Press
to end the call.
Making Voice Calls
Step
Operation
Enter a phone number by the keypad.
Select a number from the call logs lists, and press
number screen.
Press
22
HUAWEI
to dial out.
to access the Edit
3 Call Services
Step
Operation
Press
to end the call.
Making Voice/Video Calls Using the Contacts
You can make voice/video calls by choosing a number from the contacts list.
Step
Operation
Access the Contacts
Press the left or right scroll key to choose Phone
Choose a contact and then,
Press
or USIM
to view the details. After selecting a number, press
access the Edit number screen. Then, you can press
a voice call or select V-Call to make a video call.
Press
to
again to make
to access the Edit number screen. Then, you can press
again to make a voice call or select V-Call to make a video call.
Press
to end the call.
HUAWEI
23
3 Call Services
Making Voice Calls Using Speed Dialing Numbers
You can save the phone numbers you often dial to positions titled with numbers from “2”
through “9” respectively; then, in standby mode, press one of the number keys from “2”
through “9” you can dial the number that you have saved under it instantly. For more information, please refer to “Contacts/Speed Dialing Numbers” on page 1.
To make an instant call by speed dialing, follow these steps:
Step
Operation
Press and hold a number key which you have saved during speed dialing setting.
The phone number you have saved under this number will be dialed out.
Answering/Rejecting Incoming Calls
The phone will ring or vibrate to prompt an incoming call. If the call number has been saved
in the Contacts, the name of the calling party will be displayed on the screen.
You can set an answering mode for your phone: “Open flip”, “Any key” or “Send key”. The
method for answering a call is different under different answering modes. To set the answering modes, please refer to “Settings/Call Setup/Answer Mode” on page 1.
You can also launch and set the auto answer mode for your phone. For more information,
please refer to “Settings/Call Setup/Auto Answer” on page 1.
Note:
The control key on the headset is available for answering or ending a call only. It can
not be used to reject a coming call.
With Auto Answer Mode Disabled
If you have disabled the auto answer mode of your phone, you will answer or end an incom24
HUAWEI
3 Call Services
ing call as follows:
Note
Answering
a call
Operation
If you have selected one of the following answering modes:
l Open flip: You can answer a call by unfolding the phone.
Any key: You can answer a call by pressing any key except for
and
Ending a
call
with your phone unfolded.
Send key: You can answer a call by pressing
If the headset is used: You can answer a call by pressing the answer key
on the headset.
If the headset is not in use, you can fold the phone or press
to
end a call.
If the headset is in use, you can press the control key of the headset to
end a call.
Note:
When a call comes, if the phone is folded and is not during a call, you can press and
hold the Record key to mute the incoming call ring, and press and hold the Volume
key to reject the call.
With Auto Answer Mode Enabled
You can set your phone to automatically answer or end a call, the steps are shown as below:
HUAWEI
25
3 Call Services
Note
Operation
Answering
a call
If you have selected one of the following answering modes:
l Immediate answer: The phone will answer a call automatically in 5 seconds.
l Text message: The phone will automatically send the preset message to
the caller in 20 seconds.
l Recorded message: The phone will automatically answer a call in 20
seconds by playing the audio file you recorded and preset.
l If the headset is not in use, you can end a call by folding the phone or by
Ending a
call
pressing
If the headset is in use, you can end a call by pressing the control key on
the headset.
Operations during a Call
Basic Operations
Dialing a Second Number
You can directly enter a second number, or select Contacts from the main menu to choose a
phone number, and then press
to dial out.
Answering a New Call
When a call is going on, you can also answer a new call if your network operator supports
the function. You can use the U526 phone to answer up to 6 incoming calls simultaneously.
When a new call comes, the icon
26
HUAWEI
and the caller’s information will appear on the screen.
3 Call Services
To answer it, select this information and press
Icons Description
: A call is going.
: This call is held on.
:A new call comes during a call.
Other Operations During a Call
Answer/Reject
During a call, you can press the left function key and select Answer or Reject from the
popup menu to answer or reject a coming call.
Swap
During a call, you can press the left function key and select Swap from the popup menu to
resume the held call and keep the ongoing call.
Resume and Reject
During a call, you can press the left function key and select Resume and reject from the
popup menu to reject a coming call and resume the held call.
Handfree/Earpiece Switching
During a call, you can press the left function key and then select Handfree or Earpiece from
the popup menu to switch between the two modes.
Mute
During a call, you can press the right function key to make your voice mute or to restart the
HUAWEI
27
3 Call Services
conversation by pressing it again.
Contacts
During a call, you can press the left function key to pop up a menu, and then select Contacts
from the menu for operations.
SMS
During a call, you can press the left function key to pop up a menu, and then select SMS
from the menu for operations.
Hold/Resume a Call
During a call, you can press the left function key to pop up a menu, and then select Hold or
Resume to pause or restart the call.
Conference Call
If there are three or more parties involved in the same call, you can press the left function key
to pop up a menu, and select Conference to add all the saved parties into a conference.
Private Talk
During a conference call, you can press the left function key to pop up a menu from where
you can select Private to talk privately to one of the parties who are involved in the call
conference.
Ending Current/All Calls
During a call conference, you can press the left function key and select End call or End
connect calls from the popup menu to end the current or all calls.
If you select to end the current talk, press the left function key at the selected talk, and then
execute the relevant operations.
Ending Active/Held Calls
During a call, you can press the left function key and select End active calls or End held
28
HUAWEI
3 Call Services
calls from the popup menu to end all the ongoing or held calls.
Start/Stop Recording
During a call, you can press the left function key to pop up a menu, and then select Start
record or Stop record to record or stop recording the other party’s voice.
New Call
During a call, you can press the left function key and select New call. Then, the DTMF tone
of your pressing keys is not sent to the other party.
HUAWEI
29
4
Text Entry
You can use the keypad to enter English and French letters, symbols and numbers. For example, when you add entries to the Contacts list, write messages or schedule events on the
calendar, you need to enter text.
Note:
While entering characters or symbols:
Press and hold the number key corresponding to the number over the desired character or symbol on the lower part of the screen, the desired character or symbol
appears on the editing field.
Press the scroll keys to turn the pages of the displayed characters or symbols for
candidates.
“Abc” Text Input
The “Abc” text input method is a common method for entering alphabetic characters. You
can press repeatedly the key that carries the letter to be entered until it appears on the screen.
For example, to enter the word “hello” with the “Abc” text input method, you can do as follows:
HUAWEI
31
4 Text Entry
Step
Operation
that carries the letter “h” repeatedly, you will see several charPressing
acters successively on the screen. Now the current letter is highlighted. Stop
until you see an “h” on the screen.
Wait until the desired letter is not highlighted and the cursor moves to the right
of the letter, you can enter another letter. However, you can also use the scroll
key to move the cursor to the right of the letter and enter another letter.
Enter “e”, “l”, “l” and “o” in the same way.
Note:
Pressing
repeatedly, you will see “abc”, “Abc” or “ABC” on the top left
corner of the screen; indicating you are going to enter small letters, words with the
first letter being capitalized or words with all letters being capitalized respectively.
Pressing
symbols.
repeatedly, you can enter commonly-used punctuation marks and
T9 Text Input
With the T9 text entry method, you can enter easily and quickly words with predictive wording scheme. You can enter English and French texts with the U526 phone.
Press once the key carrying the desired letter, regardless in which sequence the letter is
supposed to appear normally at the key; the predictive wording scheme will present a most
commonly used word, which is highlighted.
32
HUAWEI
4 Text Entry
After entering all the letters, if the current word is not the expected one, you can press the
up/down scroll key to choose another one. Stop pressing the up/down scroll key until you
find the expected word and then press the right scroll key to move the cursor to the right of
the word.
For example, to enter the word “hello” with the T9 text entry method, you can do as follows:
Step
Operation
and
which “h”, “e”,
Press successively
“l”, “l” and “o” belong to, the screen will show the word that consists of these
letters that the keys represent.
The word “hello” appears on the screen.
Note:
If you choose T9 English text input method, pressing
repeatedly, “T9 english”, “T9 English” and “T9 ENGLISH” appears on the top left corner of the
screen in succession, indicating the word to be entered will be all in small letters,
first letter capitalized or all letters capitalized.
repeatedly, “T9 franIf you choose T9 French text input method, pressing
çais”, “T9 Français” and “T9FRANÇAIS” appears on the top left corner of the
screen in succession, indicating the word to be entered will be all in small letters,
first letter capitalized or all letters capitalized.
, and then pressing the up/down scroll key, you can choose to enter
Pressing
commonly used punctuation marks and symbols.
HUAWEI
33
4 Text Entry
“123” Numeric Input
With the “123” numeric input method, you can enter corresponding numeric characters by
pressing the Character/Number key.
For example, to enter “1” with the “123” numeric input method, you can press
“1” appears on the screen.
. Then
Symbol Input
The U526 provides an independent symbol entry method.
For example, you have chosen the symbol input method and you want to enter “!”. You can
enter this punctuation mark in two ways:
that is corresponding to “!”.
Press and hold
Or press the left/right scroll key to select “!”, and then press
Note:
In current entry method, you can press
method.
34
HUAWEI
to switch between different entry
5
Using the Menu Functions
The function menu of the U526 phone includes the following items: Contacts, Call Log,
Messaging, Camera, Organiser & Tools, My Files, Vodafone Live!, Entertainment and Settings.
The operations of the menu are shown as follows:
Step
Operation
In standby mode, press
to enter the main menu.
Press a scroll key to choose a menu item, and then press
menu.
to enter a sub-
Press a scroll key to choose an item from the submenu, and then press
enter the mode you want.
to
Operate according to the prompt on the screen.
Press
to return to the previous menu.
Press
to return to the standby mode.
HUAWEI
35
6
Contacts
The Contacts
enables you to save and manage such information as phone numbers
and addresses of your contacts. You can save such information on your phone or your USIM
card. Meanwhile, you can also set some often-used numbers for speed dialing for your convenience.
Viewing Details
With this function, you can view the detailed information of the selected contact.
Step
Operation
Enter the Contacts
select Phone
or USIM
screen, and then press the left/right scroll key to
Press the up/down scroll key to select the contact to be viewed.
Press the left function key to enter Options, and then select Details from the
submenu.
Press
.to confirm.
HUAWEI
37
6 Contacts
On the screen for viewing the details, you can press the left function key to select Options,
and then you can perform the following operations: editing, saving, sending text messages,
sending multimedia messages and sending postcards.
Searching for a Contact Entry
With this function, you can find the information of the desired contact from the contacts list
easily and quickly. You can perform this function on either the Phone screen or the USIM
screen.
Step
Operation
Enter the Contacts
select Phone
or USIM
screen, and then press the left/right scroll key to
Press the left function key to enter Options, and select Search from the submenu.
Press the left function key to enter Options, select Search, and then enter letters
contained in the name to be searched for, and then press
. The phone will
display the related information of the contacts whose names contain the letters
you entered.
Note:
No matter you search in the Phone screen or the USIM screen, the search will cover
all the contacts from the both memories.
You can also search contacts in speed on the Phone or USIM screen. Perform the following
steps:
38
HUAWEI
6 Contacts
Step
Operation
Enter the Contacts
select Phone
or USIM
screen, and then press the left/right scroll key to
Pressing one of the character/number keys from
through
, the
letters carried by this key are displayed at the bottom of the list, and the contact
entries whose names contain one of these letters are listed on the screen.
You can also find an entry by inputting the first letters of the first name and the
second name of the entry.
For example, to find an entry named “Alice”, inputting any one letter in “Alice”,
such as “a”, the entry is in the list on the screen.
Adding a New Contact Entry
To add a new contact entry to your phone, you can add the contact’s Name, Mobile phone
number, Office telephone, Home telephone, address, Email address and Fax number. You can
also select icons, groups and ring tones for the incoming calls.
To add a new contact entry to the USIM card, you can only enter the Name, Phone number,
fax number and Email address of the contact (Whether Email addresses and fax number can
be added depends on your USIM card).
HUAWEI
39
6 Contacts
Step
Operation
Enter Contacts
Phone
or USIM
screen, and then press the left/right scroll key to select
Press the left function key to activate the Options menu, and then select Add.
Enter relevant information, and then press the left function key to select Save
from the submenu to end the operation.
Deleting a Contact Entry
You can delete entries from the phone or USIM card. You can select to delete them one by
one or to delete all of them at one time.
Step
Operation
Enter the Contacts
Phone
or USIM
screen, and press the left/right scroll key to select
40
Select the entry to be deleted. Then, press
or select Options/Mark
to check the checkbox to the right of the entry. You can also select Unmark
from the submenu to cancel the selection on the entry.
To delete one entry, just perform the next step directly.
Press the left function key to pop up the Options submenu and select Delete.
Select Yes to confirm the deletion, or press No to cancel it.
HUAWEI
6 Contacts
Copying a Contact Entry
You can copy one or several entries from your phone memory to your USIM card or from
your USIM card to your phone.
Step
Operation
Enter the Contacts
select Phone
or USIM
screen, and then press the left/right scroll key to
Select the entry to be copied. Then, press
or select Options/Mark
to check the checkbox to the right of the entry. You can also select Unmark
from the submenu to cancel the selection on the entry.
To copy one entry, just perform the next step directly.
Press the left function key to pop up the Options, and then select Copy to
USIM or Copy to phone.
Select Yes to confirm the copy, or press No to cancel it.
Note:
To copy entries from the phone to the USIM card, you can only copy the names, the
first non-empty number and Email addresses.
Mark All
You can perform this function on the phone screen or the USIM card screen separately:
HUAWEI
41
6 Contacts
Step
Operation
Enter the Contacts
select Phone
or USIM
screen, and then press the left/right scroll key to
Press the left function key to pop up the Options, and then select Mark all.
Press
to confirm the operation.
Unmark All
You can select all the entries on the phone or those on the USIM card separately:
Step
Operation
Enter the Contacts
select Phone
or USIM
screen, and then press the left/right scroll key to
Press the left function key to pop up the Options, and then select Unmark all.
Press
to confirm the operation.
Sending a Contact Entry
This option is used to send the selected contact entries by short messages to other devices
supporting SMS.
42
HUAWEI
6 Contacts
Note:
You can send one entry only each time, and the entry can contain the name, phone
number and Email address while sending it by SMS. Other information (such as
home address) cannot be sent in this way.
Viewing Memory Status
You can view the memory status of both the phone and the USIM card, including the number
of the saved entries and total capacity of the phone and the USIM card. You can access it
from either the Phone screen or the USIM screen.
Step
Operation
Enter the Contacts
select Phone
or USIM
screen, and then press the left/right scroll key to
Press the left function key to pop up the Options, and then select Memory
status.
Press
to view it.
My Business Card
This option is used to save the handset owner’s information including name, mobile phone
number, office telephone number, fax number, Email address and so on. You can send the
information out by Short Messaging Service.
HUAWEI
43
6 Contacts
Step
Operation
Enter the Contacts
select Phone
or USIM
screen, and then press the left/right scroll key to
Press the left function key to pop up the Options, and then select My business
card.
Enter the editing screen, select Options, and then,
l Select Save to store the business card information you entered;
l Select Send by SMS to send the information out by short messages;
l Select Delete to clear the business card information you entered.
Press
to confirm.
Backup Contacts
This option is used to copy and save the contact entries from the phone to the memory card.
Restore Contacts
This option is used to copy and save the contact entries from the memory card to the phone.
Speed Dialing Numbers
You can save the often-used numbers to the positions for speed dialing keys. You can select
one from the numbers from “2” through “9”.
44
HUAWEI
6 Contacts
Step
Operation
screen, and then press the left/right scroll key to
Enter the Contacts
select Speed Dial No.
Select a position for saving the speed dialing number, and then press the left
function key to select Edit or press
to enter the Search screen.
Press the left function key and then select Search to find the desired phone
number.
Press the up/down scroll key to select the desired number, and then press the
left function key to select Select or press
to confirm.
Groups
You can manage the group information by renaming a group, adding group members, or
deleting a group.
Note:
You can not edit or delete the group names preset in the U526 phone.
HUAWEI
45
6 Contacts
Step
Operation
Enter the Contacts
select Groups
screen, and then press the left/right scroll key to
Select the expected group, and follow the prompt for corresponding operation.
Renaming a Group
You can select the group to be modified from the Groups list, and then press the left function
key to choose Rename.
Adding/Deleting a Group Member
You can add a member to a group preset in your U526 or a group that has been renamed, or
delete a member from it. Follow these steps..
Step
Operation
Select a group and press
46
HUAWEI
to view the details.
Press the left function key and select Add to access the screen for adding
members to a group.
6 Contacts
Step
Operation
Press the left function key and select Search to find the contact to be
added, and then press
Press the up/down scroll key to select the desired number, and then press
the left function key to select Select or press
to confirm.
Note:
Only the contact entries saved in the phone can be added.
After adding a member, return to the “Group member list” screen. Now, the
member you added appears on the group member list.
Select a member from the group member list, and then press the left function key and select Delete to remove it.
Deleting a Group
Selecting the group to be deleted from the Groups list, and then pressing the left function key
and selecting Delete, you can delete the group and all the members of this group.
HUAWEI
47
7
Call Log
Missed Calls
Access the Call Log
screen from the main menu and select Missed
Making Voice Calls/V-Calls
You can select a call number from the missed call logs, and then press
to access the
screen for editing numbers to make a voice call or select V-Call to make a video call.
Relevant Options
On the missed calls screen, select Options, then, you can perform the following operations:
Details
This option is used to view the detailed information of incoming and dialed calls, including
the calling time, call duration and so on.
You can perform this operation on any one of the missed calls, received calls and dialed calls
screens.
Save number
This option is used to save the numbers of the selected missed calls to the phone, the USIM
HUAWEI
49
7 Call Log
card, or an existing entry of the Contacts.
Save to phone: to save the number to the phone.
Save to USIM: to save the number to the USIM card.
Add to exist: to add the number to an existing entry of the Contacts list.
Send SMS
This option is used to send a message to the number of a selected missed call.
Delete
This option is used to delete the information of missed calls you select.
Mark
This option is used to select the information of one or more missed calls.
Unmark
This option is used to cancel your selection upon the information of a missed call.
Mark All
This option is used to select the information of all the missed calls.
Unmark All
This option is used to cancel all your selections upon the information of the missed calls.
Calls status
This option is used to display the information of voice calls, video calls or data services.
You can perform this function on the screens of missed calls, the received calls or the dialed
calls.
Voice call/V-Call: Displaying the last call duration, the incoming call duration, the outgoing call duration, the total time of all calls, and the last reset time.
50
HUAWEI
7 Call Log
Data: Displaying the total uplink flow, the total downlink flow, and the total connecting
duration; the last uplink flow, the last downlink flow and the last connecting duration; and
the last reset time.
From any of the Voice call, V-Call or Data service screens, you can reset all the statistic
information on that screen by selecting Reset.
Received Calls
Enter the Call Log
screen from the main menu and select Received
Making Voice/Video Calls
You can select a call number from the received call log, and then press
to access
the screen for editing numbers to make a voice call or select V-Call to make a video call.
Relevant Options
On the received calls screen, select Options, then, you can execute the following operations:
Save number
This option is used to save the number of a selected received call to the phone or the USIM
card.
Save to phone: to save the number to the phone.
Save to USIM: to save the number to the USIM card.
Add to the exist: to save the number to an existing entry of the contacts list.
HUAWEI
51
7 Call Log
Send SMS
This option is used to send a message to the number of a received call you select.
Delete
This option is used to delete the numbers of selected received calls.
Mark
This option is used to select the information of one or more received calls.
Unmark
This option is used to cancel your selection upon the information of a received call.
Mark All
This option is used to select the information of all the received calls.
Unmark All
This option is used to cancel all your selections upon the information of the received calls.
Dialed Calls
Enter the Call Log
screen from the main menu and select Dialed
Making Voice/Video Calls
You can select a call number from the dialed call log, and then press
to access the
screen for editing numbers to make a voice call or select V-Call to make a video call.
52
HUAWEI
7 Call Log
Relevant Options
On the dialed calls screen, select Options, then, you can execute the following operations:
Save number
This option is used to save the number of a selected dialed call to the phone or the USIM
card.
Save to phone: to save the number to the phone.
Save to USIM: to save the number to the USIM card.
Add to the existing one: to save the number to an existing entry of the contacts.
Send SMS
This option is used to send a message to the number of a selected dialed call.
Delete
This option is used to delete the numbers of selected dialed calls.
Mark
This option is used to select the information of one or more dialed calls.
Unmark
This option is used to cancel your selection upon the information of a dialed call.
Mark All
This option is used to select the information of all the dialed calls.
Unmark All
This option is used to cancel all your selections upon the information of the dialed calls.
HUAWEI
53
8
Messaging
Creating Text Messages
Before using the messaging service, you need to set the message center number. For more
information, please refer to “Messaging/Settings/Text Message Settings” on page 1.
A text message to be sent can contain 160 English letters or 70 Chinese characters at most. If
the characters you entered are more than this limit, the text will be divided into two or more
continuous messages for sending.
Step
Operation
Enter the main menu, and select Messaging
Select New SMS, and press
From the screen of editing the message, select Options:
You may select one of the text entry methods to enter the message contents.
l Selecting Common phrases, you can speed up the text entry.
l Selecting Insert number, you can insert a phone number saved on the phone
or the USIM card.
Press
to confirm.
HUAWEI
55
8 Messaging
Step
Operation
Access the “Edit numbers” screen:
to send
Enter the phone number, and then select Options/Send or press
the message.
Select Options/Group or Contacts to choose a number and send the message.
Select Options/Save to save the message.
Creating Multimedia Messages
Before using the multimedia messaging service, you need to perform relevant settings for the
service. For more information, please refer to “Messaging/Settings/Multimedia Message
Settings” on page 1.
You can send messages attached with images, text and music under this mode.
56
HUAWEI
8 Messaging
Creating a Multimedia Message
Step
Operation
Enter the main menu, and select Messaging
Select New MMS, and press
to enter the “Edit MMS” screen.
Select , or , and press
to confirm.
Select a position from the recipients list, and then press
or select Options/Edit to enter a phone number.
Select a position from the recipients list, and press the left function key to
select Contact or Group, and then select phone numbers.
From the recipients list window select phone numbers you need for To, Cc or
Bcc. Then, select Options, select Set To, Set Cc or Set Bcc. Meanwhile you
may also select Delete or Delete all to delete the selected numbers or all numbers.
Select Back to go back to the “Edit MMS” screen, select to enter
text as subject, and then press
Select to edit the pages, and then go back.
HUAWEI
57
8 Messaging
Step
Operation
Select Options/Send to send this multimedia message.
Select Options/Save to save this message to Messaging/MMS/Drafts.
Select Options/Add to template to save this message at Messaging/MMS/Templates.
Select Options/Send settings to set relevant sending parameters for sending
multimedia messages. For details, please refer to “Messaging/Settings/Multimedia Message Settings” on page1.
Select Options/Size to view the size of this multimedia message.
Making Multimedia Pages
Step
Enter the Edit MMS to make a multimedia message.
Select
Select
to enter the image editing field where you can choose images or
video files.
Select
58
Operation
to access the text entry field, and then edit text.
to enter the music editing field where you can choose audio files.
Enter the field indicated by
and press the left/right scroll key to select one
from different pages if there are more pages.
and press the left/right scroll key to adjust the
Enter the field indicated by
playing time (in seconds) of the current page.
HUAWEI
8 Messaging
Step
Operation
Select Options and you have the following options:
l Remove object: to remove the content from the selected field.
l Insert page: to insert a new page.
l Delete page: to delete the current page.
l Preview: to preview this page.
Note:
If the video file is chosen, you can not edit the audio files any more.
Text Message (SMS)
The U526 provides three mailboxes for SMS (Short Messaging Service), namely, the Inbox
, Outbox
and Draft
Inbox
You can save the received messages in the Inbox.
Icons in the Inbox
Icon
Description
A read message on the phone
An unread message on the phone
A read message on the USIM card
HUAWEI
59
8 Messaging
Icon
Description
An unread message on the USIM card
A message report
Viewing Messages in the Inbox
Step
Operation
Select Messaging/SMS from the main menu.
Select Inbox
Press the up/down scroll key to view the messages.
Select a message and then press
to view the details.
Press
Press
to reply with a text message.
to access the Edit number screen. Then, you can press
again to make a voice call or select V-Call to make a video call.
60
HUAWEI
8 Messaging
Step
Operation
To view the text message page, select Options, and then you can do the following operations:
Reply: to reply the message.
Delete: to delete the message.
New: to create a message.
Forward: to forward the message.
Save number: to obtain a phone number from the message (If there are several numbers, you will be prompted to make selections.) and save it to your
phone or USIM card or to add it to an existing entry in the Contacts.
Copy to USIM: to copy the message to the USIM card.
Extract URL: to obtain an URL address from the message and use it (If there
are several URL addresses, you will be prompted to make selections.) to access the Internet or stream media.
Save email addr.: to obtain an Email address from the message (If there are
several addresses, you will be prompted to make selections.) and save it.
Other Operations for the Inbox
Step
Operation
Select Messaging/SMS from the main menu.
Select Inbox
HUAWEI
61
8 Messaging
Step
Operation
Select Options, and then you can do the following operations:
l Details: to view the selected message.
l Delete: to delete the selected message.
l Reply: to reply to the selected message.
l New: to create a new message.
l Forward: to forward the selected message.
l Mark/Unmark: to choose the current message, or to cancel your choice upon
the current message.
l Mark all: to choose all the messages in the Inbox.
l Unmark all: to cancel all the selections in the Inbox.
l Save number: to save the sender’s number corresponding to the selected
message. You can save it to the phone or the USIM card as a new entry, or
add it to an existing entry in the Contacts.
l Copy to USIM: to backup one or more selected messages to the USIM card.
l Memory status: to view the memory status of the phone and the USIM card,
including quantity of saved messages and the total capacity.
Outbox
The Outbox is used to save the messages that have been sent out.
62
HUAWEI
8 Messaging
Icons in the Outbox
Icon
Description
A text message that have been sent out and saved to the phone
A text message that have been sent out and saved to the USIM card
Viewing Messages in the Outbox
Step
Operation
Select Messaging/SMS from the main menu.
Select Outbox
Press the up/down scroll key to view the messages.
Select a message and press
to view the details.
Press
Press
to forward this message.
to access the Edit number screen. Then, you can press
again to make a voice call or select V-Call to make a video call.
You can select from the Options to execute the same operations as that in the
Inbox of SMS. You can also edit the selected messages.
HUAWEI
63
8 Messaging
Other Operations for the Outbox
Step
Operation
Select Messaging/SMS from the main menu.
Select Outbox
Select Options, and then you can do the following operations:
l Details: to view the selected message.
l Edit: to edit the selected message.
l Delete: to delete the selected message.
l New: to create a new message.
l Forward: to forward the the selected message.
l Mark/Unmark: to choose the current message, or to cancel your choice upon
the current message.
l Mark all: to choose all the messages in the Outbox.
l Unmark all: to cancel all the selections in the Outbox.
l Save number: to save the recipient’s number corresponding to the selected
message. You can save it to the phone or the USIM card as a new entry, or
add it to an existing entry in the Contacts.
l Copy to USIM: to backup one or more selected messages to the USIM card.
l Memory status: to view the memory status of the phone and the USIM card,
including quantity of saved messages and the total capacity.
Draft
The Draft box is used to save the messages you created and saved and those failed to be sent.
64
HUAWEI
8 Messaging
Icons in the Draft
Icon
Description
A text message saved to the phone
A text message saved to the USIM card
Viewing and Editing Messages in the Draft
Step
Operation
Select Messages/SMS from the main menu.
Select Draft
Press the up/down scroll key to view the messages.
Select the message to be viewed and press
to edit it.
Other Operations for the Draft
Step
Operation
Select Messages/SMS from the main menu.
Select Draft
HUAWEI
65
8 Messaging
Step
Operation
Select Options, and then you can execute the following operations:
l Edit: to edit the selected message.
l New: to create a new message.
l Delete: to delete the selected message.
l Forward: to forward the selected message.
l Mark/Unmark: to choose the current message, or to cancel your choice upon
the current message.
l Unmark all: to cancel all the selections in the Draft.
l Mark all: to choose all the messages in the Draft.
l Save number: to save the recipient’s number corresponding to the selected
message. You can save it to the phone or the USIM card as a new entry, or
add it to an existing entry in the Contacts.
l Copy to USIM: to backup one or more selected messages to the USIM card.
l Memory status: to view the memory status of the phone or the USIM card,
including quantity of saved messages and the total capacity.
Multimedia Message (MMS)
The U526 provides four mailboxes for MMS (Multimedia Messaging Service), namely, Inbox
, Drafts
, Sent
and Templates
Inbox
The Inbox is used to save the multimedia messages you received.
66
HUAWEI
8 Messaging
Icons in the Inbox
Icon
Description
A message that has been read
A message that has not been read
A notice that has been read for receiving a multimedia message, or a
report that has been read for having sent a multimedia message.
An unread notice for receiving a multimedia message, or an unread report for having sent a multimedia message.
Viewing Messages in the Inbox
Step
Operation
Select a multimedia message to view its contents.
During the playing, you can select Stop to stop playing.
During the playing, select Options to perform the following operations:
Next page: to play the next page.
l Previous page: to play the previous page.
l Rewind: return to the first page and begin to replay the multimedia message.
l Object list: After entering the content list of this message, you may select an
item and select Save to save the message to a corresponding directory of the
folder.
HUAWEI
67
8 Messaging
Other Operations for the Inbox
Step
Operation
Access the Inbox
Select Options, and then you can do the following operations:
l Retrieve: to download the unread multimedia message in the Inbox, when the
auto retrieve is set to off.
l Reply: to reply to a selected multimedia message.
l Forward: to forward a selected multimedia message.
l Delete: to delete a selected multimedia message.
l Move: to move selected multimedia message(s) to a specified folder.
l Folder: to save the multimedia message(s) you moved.
l Callback: to call back a selected multimedia message sender.
l Save contact: to save a selected multimedia message sender’s information.
l Sort: to sort the messages in the Inbox by senders or by date.
l Unmark all: to cancel all the selections in the Inbox.
l Mark all: to select all the multimedia messages in the Inbox.
l Memory status: to view the memory status of multimedia messages, including
the occupied memory of every mailbox, Template and Folder and that of the
total.
of MMS.
Drafts
The Drafts is used to save the multimedia messages you created and saved and those failed to
be sent.
68
HUAWEI
8 Messaging
Icons in the Drafts
Icon
Description
A multimedia message saved after you created it
A multimedia message failed to be sent
Viewing and Editing Messages in the Drafts
Step
Operation
Enter the Drafts and select the multimedia message to be viewed or edited.
Press
to enter the editing screen.
Now you can edit the message. The operations are the same as those for creating
a multimedia message.
HUAWEI
69
8 Messaging
Other Operations for the Drafts
Step
Operation
Access the Drafts
Select Options, and you can perform the following operations:
l Edit: to edit the selected multimedia message.
l Select: to choose the current multimedia message.
l New MMS: to create a new multimedia message.
l New postcard: to create a postcard.
l Delete: to delete the selected multimedia messages.
l Move: to move the selected multimedia messages to a specified folder.
l Folder: to save the multimedia messages you moved.
l Sort: to sort the messages in the Drafts by recipients or by date.
l Unmark all: to cancel all the selections in the Drafts.
l Mark all: to select all the multimedia messages in the Drafts.
l Memory status: to view the memory status of multimedia messages, including
the occupied memory of every mailboxes, Template and Folder and that of the
total.
of the MMS.
Sent
The Sent is used to save the multimedia messages that have been sent successfully.
Icons in the Sent
Icon
Description
A multimedia message that has been sent
70
HUAWEI
8 Messaging
Viewing Messages in the Sent
Step
Operation
Select a multimedia message and then select View.
During playing, you can select Stop to stop playing.
During playing, you may select Options to do the following operations:
Next page: to play the next page.
l Previous page: to play the previous page.
l Rewind: return to the first page and begin to replay the multimedia message.
l Object list: After entering the content list of this message, you may select an
item and select Save to save this item to a directory of the folder.
HUAWEI
71
8 Messaging
Other Operations for the Sent
Step
Description
Access the Sent
Select Options and you have the following options:
l Forward: to forward a selected multimedia message.
l Delete: to delete selected multimedia messages.
l Move: to move selected multimedia messages to a specified folder.
l Sort: to sort the messages in the Sent by recipients or by date.
l Unmark all: to cancel all the selections in the Sent.
l Mark all: to select all the multimedia messages in the Sent.
l Settings: to set parameters relating to multimedia messages. For details,
please refer to “Messaging/Settings/Multimedia Message Settings” on page 1.
l Memory status: to view the memory status of multimedia messages, including
the occupied memory of every mailboxes, Template and Folder and that of the
total.
of the MMS.
Templates
To send messages quickly, you can turn the content of commonly used multimedia messages
into samples and have them saved. All operations on the Templates menu are basically the
same as those for the Drafts. Please refer to the Drafts for details.
Folder
You can save your multimedia messages into different folders.
You can access the Folder from the four tabs of Inbox, Drafts, Sent or Template. The management of the Folder is similar to that for the Drafts or Template. Please refer to these sec72
HUAWEI
8 Messaging
tions for details.
Now let’s take the operations in the Inbox screen as example for description.
Select MMS/Inbox
erations:
. Then, select Options/Folder. You can perform the following op-
Rename: to rename a folder.
Select: to enter a folder. Operations for that folder are similar to those for the Drafts or
Template. Please refer to them for details.
New Postcard
Before you use the postcard service, you have to set relevant parameters first. Please refer to
“Messaging/Settings/Multimedia Message Setting” in page 1. You are allowed to send
messages with pictures and text through postcard message.
Step
Operation
Enter the main menu, and select Messaging
Select New postcard, and press
to enter;
On the Edit Postcard page, use upward/downward scroll key to turn setting
items, including Name, Additional Info, Street, City, Postal code,
State/Province, Country and Content.
HUAWEI
73
8 Messaging
Step
Operation
Enter the Edit Postcard page and select Options:
l Select Edit to enter postcard content;
l Select Save to save the postcard to Messaging/MMS/Drafts.
l Select Send to send out the edited postcard;
l Select Contact to insert the contacts recorded in the phone;
l Select Save contact to save the selected contacts to which to postcard
will be sent to.
Press
to confirm;
Push Inbox
The Push Inbox is used to save the Push messages you received.
To receive Push messages, you need to switch on the Push Inbox at first. For details, please
refer to “Browser/Homepage/Settings” on page 1. To use the browser functions, you need to
set the network. For more information, please refer to “Browser/Select Profile” on page 1.
Viewing Push Messages
Enter the Push Inbox and select a Push message. Select Detail to view the properties of the
Push message. Then, select Load to start the WAP browser. Connect a URL specified by the
Push message and view the details.
: A Push message that has been read
: A Push message that has not been read
74
HUAWEI
8 Messaging
Other Operations for the Push Inbox
Enter the Push Inbox and select Options to perform the following operations:
Load
Start the WAP browser and connect a URL specified by the Push message.
Delete
It is used to delete the selected messages.
Unmark all
It is used to cancel all the selections upon the Push messages.
Mark all
To select all the Push messages.
Settings
Text Message Settings
You can change the SMS settings by performing the following steps.
HUAWEI
75
8 Messaging
Step
Operation
Select Messaging/Settings/SMS from the main menu.
Set the parameters related to messaging:
l Message center: The U526 phone can automatically read the number of the
message centre from the USIM card. If no such information or you have deleted the information by accident, please contact your network operator for it.
l Valid period: The time of keeping a message in the message centre after it is
sent.
l Auto save: You can set whether a message will be saved automatically to the
Outbox when it is sent. You have three options: Yes, No and Remind before.
l Save to: For setting the location for saving a newly created message. You
have two alternatives: Phone or USIM.
l Signature: For setting whether your signature will be sent along with the
message. You can edit the signature by yourself.
l Status report: You can set it to “On” or “Off”. If you set it to “On”, the network will send you the information on whether the message has reached to
the recipient.
Multimedia Message Settings
Select Messaging/Settings/MMS, and then you can set parameters related to multimedia
messages. It contains the following submenus.
Sending
This option is used to set parameters related to sending multimedia messages.
Expire time: The time for a multimedia message to be stored in the message centre since it
has been sent.
76
HUAWEI
8 Messaging
Send report: You have two alternatives: On and Off. With this mode being enabled (On),
the network will send a report for successfully sending a multimedia message.
Send limit: To set the size limit of a multimedia message to be sent.
Save on send: To decide whether a multimedia message will be saved to the Sent after it
has been sent.
Sender visibility: To set whether the sender information will be displayed when a multimedia message is sent.
Retrieval
This option is used to set parameters related to retrieval of multimedia messages.
Send delivery report: You have two alternatives: On and Off. With this mode being enabled (On), the network will reply to the sender’s multimedia message with a report indicating that you have received the message.
Retrieval limit: To set the size limit of a multimedia message that you can receive.
Auto retrieval: To set whether the phone automatically receives multimedia messages or
not.
Data account
This option is used to choose the information about the data account to be adopted when you
send multimedia messages. For more information, please refer to “Connections/Data Account” on page 1. And please consult your network operator for the content to be set.
WAP gateway
This option is used to set parameters related to the WAP gateway: including the WAP gateway address, HTTP Port, User name and Password. Please consult your network operator for
specific parameters.
When entering different parameters of the WAP gateway, you can use the up/down scroll key
to access different items.
HUAWEI
77
8 Messaging
MMS center
The number of the multimedia centre has been preset on your phone. If you have deleted or
changed it by accident, please contact your network operator.
Connection type
This option is used to set the connection type of multimedia messages.
Push Inbox Settings
Select Messages/Settings/Push messages, and then you have the following options:
Push setting
l Accept all: to set to accept all Push messages.
l Accept trusted: to set only the trusted Push messages can be accepted.
l Accept MMS Push: to set only the Push messages prompting you with a multimedia message can be accepted.
l Accept none: to set no Push message can be accepted.
Voice Mail Number
To use the voice mail services, you need to apply to your network operator for it. After setting the correct number provided by your network operator, if you press and hold
in
standby mode, the phone will dial out the voice mail number automatically to access the
voice mailbox.
Step
78
Operation
Select Messaging/Settings/Voice mail No. from the main menu.
Input the voice mail number and select OK.
HUAWEI
8 Messaging
Common Phrases
Your U526 has been preset with some commonly used phrases in inputting message, sending
messages while making a call and auto replying. You can edit them if you want.
Step
Operation
Select Messaging/Settings from the main menu.
Select Common phrases.
Select the phrase to be modified; and then select Modify.
HUAWEI
79
9
Multimedia
The Multimedia
provides you with various multimedia services such as taking photos, making videos, recording voice, viewing images, playing music and playing video.
Camera
With this function, you can take photos with your phone at any moment.
Access the Camera function to display the viewfinder screen. You can select Options/Internal view or Options/External view to change the direction of viewfinder.
In the viewfinder mode, press
to capture a picture. You can press and hold
capture pictures continually. After capturing a picture, you can press
Send MMS or Send postcard to send the latest picture out at once.
to
and then select
The pictures taken with the phone will be saved to the My Files/Images/Camera folder.
HUAWEI
81
9 Multim edia
Note:
If you exit from the camera function and access it again, it takes pictures with the
resolution used in the last time. If you select the full screen mode, you can open the
screen function menu in this way: under the full screen viewfinder mode, press the
left function key, and select Normal size from the popup menu to access the
non-full-screen mode.
Introduction to the Screen Functions
The screen function menu contains the following functions:
Function
Description
The brightness: You can press the left/right scroll key to adjust the
brightness.
The foci: You can press the up/down scroll key to adjust the foci of the
camera lens.
Note:
If you set the resolution to be 640*480, you can not adjust the foci.
Introduction to the Menu Functions
In the viewfinder mode press the left function key to open a menu where you can execute the
following operations:
Operation
Snapshot
82
HUAWEI
Description
Select this function, you can capture a picture.
9 Multim edia
Operation
Description
Frame
With this function, you can select a frame file, or cancel using
frames in the process of taking pictures.
Normal
size/Screen size
With this function, you can adjust the size of viewfinder frame.
Gallery
Select this function to access the camera folder, you can view the
existing pictures in the folder.
Internal/External
view
With this function, you can change the direction of viewfinder.
Self timer
With this function, you can take pictures on the basis of timing.
The count-down time is 10 seconds.
l Size: to adjust the solution.
l Effects: to select an effect for your picture.
l Image quality: to select an image quality for your picture.
l White balance: The phone provides you with several kinds of
white balance including Auto, Fluorescent, Incandescent, Daylight, Cloudy and Night mode.
l Save to: to select to save your pictures in your Phone or on the
Memory card.
l Shutter tone: to select a sound for the shutter.
l Reset: to restore the defaulted settings of the camera.
With this function, you can access the functions of video camera.
Settings
Video camera
Video Camera
With this function, you can make video with your phone at any moment.
HUAWEI
83
9 Multim edia
From the main menu, select Camera
viewfinder screen.
/Video camera, and press
In the viewfinder mode, you can press
to make video.
to access the
Introduction to the Functions on Viewfinder Screen
Access the Video camera function to display the viewfinder screen. You can select Options/Internal view or Options/External view to change the direction of viewfinder.
Introduction to the Screen Functions
The screen function menu contains the following functions:
Function
Description
The brightness: You can press the left/right scroll key to adjust the brightness.
The foci: You can press the up/down scroll key to adjust the foci of the
lens.
Introduction to the Menu Functions
In the state of viewfinder, press the left function key to open a menu where you can execute
the following operations:
Operation
Record
84
HUAWEI
Description
Select this option to start making video.
9 Multim edia
Operation
Description
Zoom display
With this function, you can adjust the size of the viewfinder without changing the solution.
Internal/External
view
Gallery
Settings
Memory size
With this function, you can change the direction of viewfinder.
Select this function to access the video camera folder, you can
view the existing video files in the folder.
l Size: to adjust the solution.
l Quality: to select an image quality for your video.
l Frame rate: to select frame rate for your picture.
l Audio: to select whether to record audio while making video.
l Duration: to select the duration for making a video.
l Save to: to select to save your pictures in your Phone or on the
Memory card.
l Reset: to restore the defaulted settings of the video camera.
With this function, you can view the ratio of the used space to the
total space and the duration for the free space.
Send MMS
After making a video, you can select this function to send the
video file out at once.
Camera
With this function, you can access the functions of camera.
Note:
If you set the resolution to be 176*144, zoom display is not available.
Introduction to the Functions During Recording
In the state of viewfinder, you can press
to make video. In the state of shooting, you
HUAWEI
85
9 Multim edia
can execute the following functions:
Introduction to the Screen Functions
In the state of viewfinding, you can adjust the brightness and foci. You can use the left/right
scroll key to adjust the brightness, and use the up/down scroll key to adjust the foci.
Introduction to the Softkey Functions
to switch between pause and going on
In the process of making video, you can press
the shooting; or you can press the right function key to stop the shooting.
In the state of making video, if you press the right function key to stop making video, you
can either choose to delete or save the video. The video files will be saved at the Gallery/Videos/Video camera folder.
Voice Recorder
The U526 phone provides you with the function of recording voice. You can set the duration
for the recording.
Select Camera
/Voice recorder from the main menu, and then press
cess the voice recorder screen where you can execute the following operations:
to ac-
Preparations Before the Recording
1. Setting duration: On the standby screen of the voice recorder, you can select Options/Duration to set the duration.
2. Viewing record: On the standby screen of the voice recorder, you can select Options/Gallery to view the audio files.
86
HUAWEI
9 Multim edia
3. Starting recording: On the standby screen of the voice recorder, you can press
start recording.
to
Operations During the Recording
1. Pause: In the process of recording, you can press
to stop the current recording, and
press
again to continue.
2. Stopping and saving: In the process of recording, you can press the left scroll key to stop
the current recording. And the audio file is saved in Gallery/Music/Voice recorder
automatically.
3. Exiting the current audio file: In the process of recording, you can press the right function key or press
to exit the current audio file.
Operations After the Recording
To play an audio file instantly: When the recording is finished, you can press the right scroll
key to play it instantly. You can press the left scroll key to stop the playing, and press
key to switch between the two functions of play and pause.
Note:
While playing a recorded audio file instantly, you can press the Volume key to adjust
the volume.
Viewing Images
With this function, you can view various images including those coming with the phone,
HUAWEI
87
9 Multim edia
those shot by yourself with the phone, those downloaded from the Internet and those attached
to messages and Emails.
The phone supports images of many formats including JPG, BMP, WBMP, PNG, GIF
87a/89a, GIF animation, BCI and SVG.
You can view an image in two ways: browse it; or to zoom it in to view it in the original size.
You can press
lows:
to switch between these two modes. The detailed description is as fol-
Browsing the Images
Select one or several images from the image list. Then, press
of browsing.
to view them in the state
The image is zoomed proportionally and displayed when you view it on the screen of browsing status, during which you can see such information as the name and size of the image.
In the state of browsing images, you can execute the following operations by following the
prompts of the functional keys:
Operation
Description
Press the up scroll key to view the previous image.
Press the down scroll key to view the next image.
You can press
88
HUAWEI
to view the image in its original size.
9 Multim edia
Operation
Editing the
image
Setting as the
wallpaper
Description
Press the left function key and select Edit to access the screen for
editing the image. Then, select Options, and then you can perform the
following operations:
l Cut picture: to crop the image.
l Add text: to add texts to the image.
l Add frame: to add a frame to the image.
You can press the left function key and then select Wallpaper to set an
image as the wallpaper.
Zoom Status
In the state of browsing, you can press
to view the image at its original size.
While viewing the image at its original size, you can press the up/down/left/right scroll key
to move it so as to view the whole image.
While viewing the image at its original size, you can press
browsing the image.
to switch to the state of
Playing Video
With this function, you can play various video files including those coming with the phone,
those shot by yourself with the phone, those downloaded from the Internet, those attached to
the messages and Emails and those shot by yourself when you make video calls. You can also
enjoy online video files.
HUAWEI
89
9 Multim edia
The phone supports video files of many formats including MP4, 3GP, 3G2, PMD and RM.
Select one or several video files from the video list, and press
you can execute the following operations upon the video files.
Operation
to play, during which
Description
Press the up scroll key to play the previous video file.
Press the down scroll key to play the next video file.
Fast forward
Press the right scroll key to fast forward the video file.
Rewind
Press the left scroll key to rewind the video file.
Pause
Press
, the playing pauses; press
continues.
again, the playing
Zoom in/out the
video image
You can press the left function key to zoom in or out the video
image and change its direction.
Adjust the volume
Press the Volume key to adjust the volume.
Note:
In the case of a coming call when a video file is being played, after you answer the
call and ring off, the video file continues to play starting from where it was interrupted; if you pressed the Pause, the video file is still in pause status after you answer the call and ring off.
Playing Music
With this function, you can play various music files including those coming with the phone,
90
HUAWEI
9 Multim edia
those recorded by yourself with the phone, those downloaded from the Internet, those attached to the messages and Emails. You can also enjoy the online audio files.
The phone supports audio files of many formats including MP3, AAC/AAC+, AMR, MID,
WAV (ADPCM), MMF, QCP, XMF/DLS and RAM.
Select one or several music files from the music list, and press
you can execute the following operations upon the music files.
Operation
to play, during which
Description
Press the up scroll key to play the previous music file.
Press the down scroll key to play the next music file.
Fast forward
Press the right scroll key to fast forward the music file.
Rewind
Press the left scroll key to rewind the music file.
Pause
Adjust the volume
Press
, the playing pauses; press
continues.
again, the playing
Press the Volume key to adjust the volume.
Note:
In the case of a coming call when a music file is being played, after you answer the
call and ring off, the music file continues to play starting from where it was interrupted; if you pressed the Pause, the music file is still in pause status after you answer the call and ring off.
HUAWEI
91
9 Multim edia
Stream Media
With this function, you can enjoy stream media files on line. For detailed operations, please
refer to “Stream Media”on page 1.
92
HUAWEI
10
Organiser & Tools
This function provides you with various assistant tools for the phone, including STK, Calendar, To Do, Memo Pad, Alarm clock, Calculator, World Time, Stopwatch, Timer, Unit converter and Currency converter. You can access the Organiser & Tools screen by selecting
from the main menu.
STK
The U526 supports STK functions. The contents depend on the USIM card you are using.
For more information, please consult your USIM card provider.
Calendar
With this function, you can view the calendar and manage your schedules.
Select Calendar from the Organiser & Tools
dar functions:
, and press
to access the calen-
On the Month view screen, you can press the up/down/left/right scroll key to switch
among the days and select the needed day. Then, press
entries of the day.
to access the schedule event
HUAWEI
93
10 Organiser & Tools
On the Week view screen, you can press the up/down scroll key to switch among different
weeks; and press the left/right scroll key to switch among the days of a week. Then, press
to create a schedule event or view the details of a schedule.
On the Day view screen, you can press the left/right scroll key to switch among different
days of a week; and press the up/down scroll key to switch among the events of a day.
Then, press
to create a schedule event or view the details of a schedule event.
Calendar Functions
With this function, you can view the calendar in different modes and go to a certain date.
Operation
Description
Calendar display
mode
Three modes of displaying the calendar are available:
l Month view
l Week view
l Day view
On the Month/Week view screen, you can press the left function key
to open a menu where you can switch the display modes.
Go to…
With this function, you can switch to a certain date directly. It is used
in the state of Month view.
94
HUAWEI
10 Organiser & Tools
New Schedule
Ways to Create Schedules
Operation
Create schedule
events on the
Month view
screen
Create schedule
events on the
Week view
screen
Create schedule
events on the
Day view screen
Description
Two ways are available:
Select a date and press
to access the schedule event list of
the current day. Press the left function key to open a menu from
which select New. Then, you can create the schedule events of the
, then, create schedcurrent day (If it is empty, you can press
ule events).
l Select a date and press the left function key to open a menu from
which select New. Then, you can create the schedule events of the
current day.
Select a date and press the left function key to open a menu from
which select New. Then, you can create the schedule events of the
current day (If it is empty, you can press
events).
, then, create schedule
Select a date and press the left function key to open a menu from
which select New. Then, you can create the schedule events of the
current day (If it is empty, you can press
events).
, then, create schedule
Creating a Schedule
Access the screen for editing schedule, and then you can set the following items:
HUAWEI
95
10 Organiser & Tools
Schedule title
Schedule location
Schedule type
Start time of the schedule
End time of the schedule
When to alarm before the start time
Alarm cycle of the schedule
Schedule details
Alarm tone6
Image files
Note:
With the calendar function, a maximum of 1000 schedule entries can be created, and
a maximum of 30 schedule events can be created or displayed in a day.
Operations on the Schedule
You can not only create schedules but also edit, delete, and copy them, send them by SMS,
display all of them, view the memory status, deleting all of them and so on.
Operations on the Schedule Prompt Interface
When the time for alert you set for a schedule event is up, the alert bell rings and a prompt
interface appears. You can stop the ringing by pressing any key or by folding/unfolding your
phone. On the prompt interface, you can operate to delay or stop the alert.
or the left function key to delay.
Delay: on the prompt interface of an alert, press
Stop: on the prompt interface of an alert, press the right function key to close the prompt
interface.
96
HUAWEI
10 Organiser & Tools
Note:
The operation of delaying can be executed for many times. And the delay time is five
minutes.
To Do
This function helps you to manage and set the events to be conducted before a certain time.
Select To Do from the Organiser & Tools
, and press
to access it.
To Do Tasks Classification
The To Do events are tracked and managed in the form of tasks. It is classified into the following conditions:
Pending: a list of the events to do that are at term but have not been done
Done: a list of the events to do that have been done
All Tasks: a list of all the events to do
New To Do Tasks
If there is no To Do task, you can press
or select Options/New to create one after you
access this function, prompting you to create one. Follow these steps:
Step
Description
Input the title of the new To Do task.
HUAWEI
97
10 Organiser & Tools
Step
Description
Set the deadline date of the new To Do task.
Set the priority level.
Set the accomplishment status of the To Do task according to the process.
Select whether to alarm. If you select alarm, you need to set the time for alarm.
Set the alert time of the To Do task.
Set the type of the To Do task.
Press the left function key to save it.
Note:
A maximum of 1000 tasks can be created with the function of To Do.
Other Operations on the To Do Tasks
Other operations on the tasks include deleting, editing, copying, sending them by SMS,
marking finished, viewing the memory status and deleting all of them.
Operations on the To Do Task Prompt Interface
When the time for alert you set for a To Do task is up, the alert bell rings and a prompt interface appears. You can stop the ringing by pressing any key or by folding/unfolding your
phone. On the prompt interface, you can operate to delay or stop the To Do task prompt.
Delay: on the prompt interface of an alert, press
or the left function key to delay.
Stop: on the prompt interface of an alert, press the right function key to close the prompt
interface.
98
HUAWEI
10 Organiser & Tools
Note:
The operation of delaying can be executed for many times. And the delay time is five
minutes.
Memo Pad
With the Memo Pad function you can use your phone as paper and pen to record the important events at any time. A maximum of 100 entries can be saved.
Select Memo Pad from the Organiser & Tools
, and press
to access it. If the
Memo Pad is empty, you are required to create an entry at first after you access it.
The operations on the Memo Pad include creating, deleting, editing, sending short messages,
viewing memory status and deleting all.
Alarm Clock
With this function, you can set several alarms, including setting prompting messages,
prompting ring tones and the cycle time for alarm clocks.
Setting Alarm Clocks
Your U526 phone supports to set alarm clocks. Follow these steps:
HUAWEI
99
10 Organiser & Tools
Step
Description
Select the one to be edited from the alarm list, and press
clock.
to set an alarm
Set the alarm time.
Select a ring tone. The U526 phone provides standard ring tones and supports
to use the downloaded ring tones.
Input the prompting information.
Set the alarm cycle.
Press the left function key to start the alarm clock.
Prompt Interface of an Alarm
When the time for an alarm clock is up, the alert bell rings and a prompt interface appears.
You can stop the ringing by pressing any key or by folding/unfolding your phone. On the
prompt interface you can operate to delay or stop the alarm clock prompt.
or the left function key to delay.
Delay: on the prompt interface of an alert, press
Stop: on the prompt interface of an alert, press the right function key to close the prompt
interface.
The operation of delaying can be executed for many times. And the delay time is five minutes.
No matter the power is on or off, the alarm clock can alarm. If the power is off, it will prompt
you whether to power on when the clock alarms.
100
HUAWEI
10 Organiser & Tools
Stopping the Alarm Clock
Select an entry of alarm clock from the alarm clock list, and press the left function key to
deactivate the alarm clock.
Calculator
With this function, you can do the operations of addition, subtraction, multiplication, division
and extraction. You can:
Press the number keys to input the figures.
Press the up/down/left/right scroll key to input the operators.
Press the left function key to clear.
Press the right function key to exit from the Calculator.
Press
Press
Press
Press
to input the radix point.
to delete the character on the left of the cursor.
to do the operation of extraction.
to enter the operator of equal mark.
World Time
With this function, you can view the time of the main cities throughout the world. You can
press the left/right scroll key to switch among the time zones.
If the daylight saving time (DST) is used in the place where you are, you need to set to DST.
Then, you can get the exact local time. Follow this way: move to the desired time zone, then,
press Options/DST to select whether to set to DST.
HUAWEI
101
10 Organiser & Tools
Stopwatch
With the stopwatch function provided by the U526 phone, you can save five items of stopwatch information at most.
Start: press the left function key to start timing.
Save: press the left function key to save the first item of timing. Then, the second item
starts automatically. You can go on operating in this way.
Pause: press the right function key in the process of timing, it pauses.
or select Options/Continue, it continues to time from where it
Continue: press
paused.
Reset: in the state of pause, select Options/ Reset to reset the stopwatch and clear all the
records.
Timer
With this function, you can set a timer with at most 99 hours and 59 minutes. After you set it,
the timer is displayed on the Home screen.
On the Timer screen, you can execute the operations of pausing, continuing and resetting.
Unit Converter
The U526 phone provides you with the function of converting units, by which you can convert length and weight units.
102
HUAWEI
10 Organiser & Tools
Step
Description
Press the up/down scroll key to select the unit type bar, input unit bar or output
unit bar;
On the unit type selection bar, press the left/right scroll key to select weight or
length;
On the input unit bar, press the left/right scroll key to select the unit of the
numeric value that will be converted from;
On the output unit bar, press the left/right scroll key to select the unit of the
numeric value that will be converted to;
Press the number keys to enter a numeric value in the number bar. Then, you
can view the conversion result.
Press the left function key to clear the numeric values you entered.
Currency Converter
The U526 phone provides you with the function of converting currencies. Access the screen
of currency converter, and then you can press the up/down scroll key to switch the setup
items.
Step
Description
On the Input bar, use the number keys to key in the numeric value of the currency that will be converted;
On the From bar, press the left/right scroll key to select the currency type that
will be converted from;
HUAWEI
103
10 Organiser & Tools
Step
Description
On the To bar, press the left/right scroll key to select the currency type that will
be converted to;
On the Rate bar, key in the currency rate.
Press
to clear away the numeric value you entered.
Note:
Press Setting in the currency converter interface, and you can select the frequently
used currency units. Thus, you can just switch between the selected units on the Form or To
bar.
Service Dial Number
With this function, you can select service numbers provided by the service provider to dial.
104
HUAWEI
11
My Files
This function helps you manage such files as image, music, video and eBook conveniently.
You can access the My Files screen by selecting
from the main menu.
Images
The U526 phone supports images of many formats including BMP, JPG, PNG, BCI,
GIF87a/89a, GIF animation, WBMP and SVG.
Selecting My Files
, and then selecting Images can access the function of image
management. The phone provides two folders including Camera and Download.
You can execute the following operations upon the image files:
HUAWEI
105
11 My Files
Function
Description
View
To view an image file.
Cut
To cut a file.
Copy
To copy a file.
Delete
To delete a file.
Paste
To paste a file (you should cut or copy a file at first, then, you can
execute the operation of pasting).
Mark
To select one or more image files.
Unmark
To cancel the selection of the image file.
Unmark all
To clear away all the selected items.
Mark all
To select all the files.
Rename
To rename a file.
Properties
To view the properties of one or more files.
Note:
The Camera folder and the Download folder are pre-configured in the phone. You
can not delete them. The Camera folder does not support the function of pasting.
Music
The U526 phone supports audio files of many formats including MP3, MID, WAV (ADPCM),
QCP, AAC/AAC+, MMF, AMR, XMF/DLS, RAM,.
The phone provides two folders including Voice recorder and Download.
106
HUAWEI
11 My Files
You can execute the following operations upon the music files in the folder, namely, playing
cutting, copying, deleting, marking, unmarking, unmarking all, marking all, cycling current,
cycling all, renaming and viewing properties.
The operations of cycling current and cycling all are as follows:
Operation
Description
Cycle current
Play the currently selected one or more files cyclically.
Cycle all
Play all the music files in the list cyclically.
Note:
The Voice recorder folder and the Download folder are pre-configured in the phone.
You can not delete them. The Voice recorder folder does not support the function of
pasting.
Videos
The U526 phone supports video files of multiple formats including 3GP, MP4, 3G2, RM and
PMD.
The phone provides four folders including Video camera, Download, Stream media and
Video call.
HUAWEI
107
11 My Files
Folder
Saved files
Video camera
The 3GP files shot by the video camera function of your phone are
saved in this folder automatically.
Download
The video files downloaded by the WAP browser are saved in this
folder automatically.
Stream media
Video call
In this folder, you can perform such operations as creating, editing,
copying and deleting URL files of stream media links.
The video files recorded in the process of having video calls are saved
in this folder.
Note:
The Video camera folder, Download folder, Stream media folder and Video call
folder are pre-configured in the phone. You can not delete them. The Video camera
folder and Video call folder do not support the function of pasting files.
eBook
The phone supports to browse the eBooks in such formats as TXT and HTML.
Personal
In the Personal folder, you can create first-level folders to manage the classified files. The
Personal folder provides DCF Folder that is for saving the DCF files protected by DRM and
JAVA Folder that is for saving the downloaded files.
108
HUAWEI
11 My Files
Memory Card
When the phone finds the inserted memory card, Memory card is displayed in the file management list of the Gallery automatically. You can execute operations on the contents of the
memory card. At the same time, the U526 phone provides the function of formatting the
memory card.
HUAWEI
109
12
Vodafone Live! (Browser)
With the build-in browser, you can easily and pleasantly tour around the Internet world. You
can access the Browser screen by selecting
from the main menu.
To use the browser, you have to configure the network. For more information, please refer to
“Browser/Select Profile” on page 1.
Homepage
After launching the browser, you will see “Homepage”, the first option. You need to set the
name of the homepage. For more information, please refer to “Browser/Select Profile” on
page 1.
Browsing Web Pages
Enter the Homepage and select a link from the page; then select OK to browse the page.
Note:
During browsing, you can press the scroll keys to select a link to be accessed. The
selected link is highlighted. Now press OK to enter it.
HUAWEI
111
12 Vodafone Live! (Browser)
Other Operations for the Homepage
After selecting Options from the homepage, you can perform the following operations:
Homepage
To access the homepage. The name of the homepage you have set is displayed here.
Forward
To go forward when you browse Web pages.
Bookmarks
To access the bookmark directory. You can access the web pages linked by saved bookmarks.
Go to URL
To enter a web site address and connect it.
Recent pages
To access pages you have browsed recently. Ten entries of records can be saved.
Save
To save the pages or contents on the pages to your phone. You may select “Save page” or
“Save item”. Web pages will be saved to the Saved pages, and contents will be saved to the
folders on your phone.
Refresh
To refresh the current Web page.
Saved pages
To access the saved pages.
Select OK to browse saved Web pages in offline mode.
Select Options to perform the following operations:
112
HUAWEI
12 Vodafone Live! (Browser)
Go to: To select whether to connect again to the Web server so as to retrieve updated
pages.
Delete: To select whether to delete a selected page.
Settings
Select Settings, and then you have the following options:
Save as homepage: to save the current page as the homepage. You can press the up/down
scroll key to switch between the Title editing bar and the Address editing bar.
Multimedia: to set whether to show images or play background music.
Cache: to set the cache to be On/Off and clear the cache.
Cookies: to enable (On) or disable (Off) cookies and clear cookies.
Accept push: to enable (On) or disable (Off) “Accept push” function.
Security: to show the “Current certificate” and “CA certificates”.
Character set: to select one of the character sets, which include the following options:
“Automatically”, “Unicode (UTF-8)”, “UCS-2”, “GB2312” (for Simplified Chinese), and
“BIG-5” (for Traditional Chinese). After selecting a character set, press
function key to confirm.
or the left
Bookmarks
With this option you can save and edit the information of the websites that you often access.
The U526 supports OTA function. You can use the WAP service to obtain the Bookmarks
information provided by the operator (or the service provider).
Some bookmarks that have been preset on the phone are saved in this catalog. Select any one
of them, and then you can perform the following operations:
HUAWEI
113
12 Vodafone Live! (Browser)
Adding a Bookmark
Select Options/Add to add a Title and Address for a bookmark.
Goto a Bookmark
Select a bookmark and select OK to connect the selected bookmark; you may also connect to
the server to get the latest webpage by selecting Options/Goto.
Editing a Bookmark
Select a bookmark and then select Options/Edit to edit a selected bookmark. The preset
bookmarks can not be edited.
Deleting a Bookmark
Select a bookmark and then select Options/Delete to delete the selected bookmark.
Go to URL
Access the Go to URL screen, and then you can enter the address of the webpage to be accessed.
You can select Goto, Edit, Delete or Delete all from the Options to perform corresponding
operations upon the entered address.
Saved pages
It is used to save web pages for your offline browsing.
114
HUAWEI
12 Vodafone Live! (Browser)
Browsing Web Pages
Select a web page and then OK to enter the page; you may also select Options/Goto to connect the selected web page.
Deleting Web Pages
Select a web page and then select Options/Delete to delete the selected web page.
Push Inbox
For more information on the Push inbox, please refer to “Messages/Push Inbox” on page 1.
Select Profile
For your convenience of switching among the networks, the U526 phone provides several
profiles for setting network.
The U526 supports OTA functions. You can use the WAP service to obtain such information
as homepage, WAP gateway, data account and connection type provided by the operator (or
service provider).
to enter the Select profile
Enter the Browser and select Select profile; then press
screen. You can select Options/Rename to rename a selected profile.
Select a profile and press
or select Options/Edit, you can set the following items:
Homepage
Select Homepage and press
to access the Edit homepage screen to enter the Title and
HUAWEI
115
12 Vodafone Live! (Browser)
Address information.
You may press the up/down scroll key to switch between the Title editing bar and the Address editing bar.
WAP Gateway
Access the Wap gateway screen, you may enter IP address of the gateway, IP port, User
name and Password.
Press the up/down scroll key to switch across the input bars.
For details of the requirements for setting this information, please contact your network operator; you can also obtain them by the OTA download mode.
Timeout Settings
It is used to set the overtime (in seconds) of a connection. If it exceeds the set timeout limit, a
trial connection will stop.
Data Account
Select a data account to be used. Please refer to “Connections/Data Account” on page 1 for
setting a data account. And please consult your network operator for detailed parameters. You
can also obtain them by the OTA download mode.
to access the
Press the up/down scroll key to select a data account, and then press
screen for editing data account. After editing the items, select Save to exit the screen for editing. Select OK to activate the data account.
Connection Type
It is used to set connection type for the browser.
116
HUAWEI
13
Stream Media
The U526 phone supports the Stream Media services. To enjoy the online Stream Media
services, you need to select a data account at first. For details, please refer to “Operations on
URL files” on page 1.
Playing Stream Media Files
The U526 allows you to enjoy the Stream Media services by the following methods:
at the Stream Media files
Method 1: In the process of browsing the Internet, press
link provided by the network to play Stream Media files. For details on how to access the
Internet, please refer to “Browser” on page 1.
Method 2: In My Files/Videos/Stream media, select Options/New link to input the link
to play it.
address. Select a URL file and press
Method 3: In Camera/Stream media, select Options/New link to input the link address.
to play it.
Select a URL file and press
Method 4: On the screen of a short message, select Options/Extract URL. If there is only
one URL in this message, the Stream Media will be played directly; if there are more URL,
a URL list will be displayed, from where you can select the URL to be connected, and then
press
to play Stream Media.
HUAWEI
117
13 Stream Media
Operations during Playing Stream Media Files
In the process of enjoying Stream Media files, you can perform the following operations:
Operation
Description
Fast forward
Press the right scroll key to fast forward the stream media file.
Rewind
Press the left scroll key to rewind the stream media file.
Pause
Press
goes on.
, the playing pauses; press
again, the playing
Full Screen Mode
Press the left function key to switch to play the stream media file
in full screen. Full screen mode still supports fast forward, rewind, pause and volume adjustment.
Adjust volume
Press the Volume key to adjust the volume.
Note:
The functions of pause, fast forward and rewind are available for VOD (Video on
demand) only. They are unavailable for Living TV.
Operations on URL Files
In My Files/Videos/Stream media or Camera/Stream media, select Options, and then you
can perform the following operations:
118
HUAWEI
13 Stream Media
Option
Description
Enter
To enter the address of the selected stream media link.
New link
You can input a new link address. The link will be saved as a URL
file automatically.
Edit link
You can edit the contents of the existing URL file (Stream Media
link address).
Settings
Cut
Enter the stream media settings screen, and then you have the following options:
l Data account: to select the data account needed by Stream Media
services. For details on setting data account, please refer to “Connections/Data Account” on page 1.
l Streaming gateway: to set the gateway and port of the stream media.
l QoS: to guarantee the stream media, please enable this function.
To cut files.
Copy
To copy files.
Delete
To delete files.
Paste
To paste files. (To perform this operation, you must cut or copy files
at first. Furthermore, only URL files can be pasted.)
Unmark all
To cancel all the selections on the files.
Mark all
To select all the files.
Rename
To rename files.
Properties
To view the properties of one or more files.
HUAWEI
119
14
V-Call
Video call service is one of the featured services provided by the 3G network. It has ended up
a historic age of traditional voice call service featuring “Hearing the voice, imagining the
looks”.
Introduction to the Screen Functions
When a video call is connected, you can see the V-Call screen which contains three parts: the
phone number of the other party, current call duration, and the function menu of this screen.
Functions on the Screen
A V-Call screen contains the following adjustable functions:
Icon
Description
Press the up/down scroll key to adjust the brightness.
Press the left/right scroll key to adjust the foci of the camera lens.
Press the Volume key to adjust the volume of the earpiece.
Functions of Some Keys
During a call, you can press some keys to switch audio devices and to make video of the
HUAWEI
121
14 V-Call
other party:
To switch audio devices: You can press
to switch between the earpiece and the
handfree.
To make video of the other party: You can press the right function key to make video of the
other party during a call. You can press the right function key to stop making video. However, if you do not stop it, it will automatically stop when the memory space is not enough
or when the duration is up to 30 minutes.
Note:
The video files you made are saved to Gallery/Videos/V-Call by default.
Function Options
When a video call is connected, you will see the video call screen. Pressing the left function
key, you have the following options:
Handfree/Earpiece
During a call, you can press the left function key and then select Handfree or Earpiece from
the popup menu to switch between the two modes.
P-in-P
During a video call, your image can be shown on your phone screen. You can select P-in-P
to arrange the positions of your image. You can also choose to close your image window.
Switch Display
With this option you can switch between image windows: to display your image in the small
122
HUAWEI
14 V-Call
window and the other party’s image in the large window; or vice versa.
External View/Internal View
With this option you can adjust the direction of the camera lens.
Open/Forbid Video
With this option you can open or close the video channel of your party during a video call.
Open/Forbid Audio
With this option you can open or close the audio channel of your party during a video call.
Image Quality
With this option you can choose Best quality or More smooth for the image quality.
Play Media File
With this function you can play media files on the phone during a video call.
During a video call, you can select Options/Play media file to access the Gallery screen and
select an image or a video file. Press the left function key to confirm, the other party will
enjoy the file.
Then, select Options/Close media file, the screen recovers the camera viewfinder.
Note:
To play a video file, the video coding format of the file must be the same as that of
the current video call.
HUAWEI
123
14 V-Call
Contacts
With this option you can use the Contacts during a video call.
SMS
With this option you can send messages during a video call.
Note:
You can also set such common functions as P-in-P, Zoom display, Switch display and
Image quality at Settings/Video call setup.
124
HUAWEI
15
Connections
The data connection function of the U526 provides you with many data communication
functions. You can access the Connect screen by selecting
from the main menu. You
can synchronize data between your phone and a PC by means of a USB cable. And you can
use the built-in modem of your phone to establish a dialup connection to a PC to access the
Internet through this interface.
USB
With the USB cable, you can synchronize data between your phone and PC, use your phone
to surf the Internet and read the memory card.
HUAWEI
125
15 Connections
Caution:
To use the USB cable, please operate abiding by the following rules, otherwise,
your phone or PC may be damaged: To connect your phone and PC with the USB
cable, connect to the phone at first, and then connect to the PC; To disconnect your
phone and PC from the USB cable, disable the HUAWEI U526 MOBILE PHONE
PC Assistant at first, and then disconnect from the PC, and disconnect from the
phone at last.
When you use the USB cable to connect your phone and a PC, if the PC cannot
recognize the U526 phone, shut down the PC and restart it a moment later. Then,
connect the USB cable to the PC.
Do not plug the USB cable in and out the U526 phone frequently.
USB-Based Synchronization
The U526 phone supports the synchronization requests from a PC to your phone.
With the USB cable and the HUAWEI U526 MOBILE PHONE PC Assistant coming with
your phone, your phone can communicate with a computer. You can backup and edit the
contact entries and messages saved on your phone and USIM card on a computer. You can
also synchronize contacts, schedule events and To Do tasks between your phone and the
Outlook or the Outlook Express.
Follow these steps to operate the USB-based synchronization with your U526 phone.
126
HUAWEI
15 Connections
Step
Description
Install the HUAWEI U526 MOBILE PHONE PC Assistant coming with your
phone: Insert the disk and select “Install HUAWEI PC Assistant” and “Install
USB Data Cable Driver”, then, click and follow the guide to
complete the installation.
Access the main menu screen, and select Settings/Connect/Modem setup, set
modem via USB, and then press Settings to select a data account to be used.
Connect your phone and PC with the USB cable.
Run the application program of the HUAWEI U526 MOBILE PHONE PC
Assistant on the PC.
Now you can operate the synchronization.
Note:
For details of the operation, please refer to the Help of the HUAWEI
U526 MOBILE PHONE PC Assistant.
Note:
While running the HUAWEI U526 MOBILE PHONE PC Assistant on the PC, you
can select “Communication” from the “Options”, and then click to connect the port corresponding to the USB Modem.
Accessing the Internet by USB
Connecting your phone and PC with the USB cable enables the PC to use the phone as a
modem to establish a dial-up connection to the Internet.
HUAWEI
127
15 Connections
To access the Internet by using the USB, two ways are available: one is to use the HUAWEI
U526 Mobile Phone PC Assistant coming with the U526 phone; the other is to use the Windows operation system to set the service.
Note:
Windows 2000 and Windows XP are supported.
Using HUAWEI U526 Mobile Phone PC Assistant to Access the Internet through
USB Cable
To use the HUAWEI U526 Mobile Phone PC Assistant coming with the U526 phone to access the Internet, follow these steps:
128
HUAWEI
15 Connections
Step
Description
Ensure that your USIM card supports the Internet access service.
Access the main menu, and select Settings/Connect/Data account, and then
select a profile from the list to set relevant information.
On the main menu screen, select Settings/Connect/Modem setup, set modem
via USB, and then press Settings to select a data account to be used.
Install the HUAWEI Mobile Phone PC Assistant that come in with your U526
phone package: Insert the CD carrying the application software, select “Install
USB Data Cable Driver” and “Install Dial-up Wizard” and click .
Then, follow the prompts to complete the installation.
Connect your phone and PC with the USB cable.
Confirm there is USB Modem in the Modem of the Device Manager of your
PC.
1.
2.
3.
4.
5.
Run the U526 Dial-up wizard on the PC.
Select from the pop-up window.
Select “New Dialup Connection (Modem)” and press to confirm.
Select the Modem that is connected in USB mode from the “Modem” list.
Enter the information of setting the dial-up connection to the Internet provided by the service provider to the “Dialup Setting” field and click .
6. Select “HUAWEI Phone Connection” on your PC to make dial-up connection.
HUAWEI
129
15 Connections
Using Windows OS to Set the Function of Accessing the Internet with Your
Phone
You can also connect your phone and PC with the USB cable, and then use the Windows
operating system to set the function of accessing the Internet by your phone. Follow these
steps:
Step
130
Description
Ensure that your USIM card supports the function of accessing the Internet.
On the main menu screen, select Settings/Connect/Data account, and set
relevant information.
On the main menu screen, select Settings/Connect/Modem setup, set modem
via USB, and then press Settings to select a data account to be used.
Install the HUAWEI U526 Mobile Phone PC Assistant coming with your U526
phone package: Insert the CD carrying the application software, select “Install
USB Data Cable Driver” and click . Then, follow the prompts to
complete the installation.
Connect your phone and PC with the USB cable.
Ensure that there is “USB Modem” in the “Modem” of the “Device manager”
of your PC.
On your PC, you can select “Network Connections” from the “Control Panel”
and click Create a new connect”. Then you can follow the guides to create a
new connect.
Execute the new connection to dial up the Internet.
HUAWEI
15 Connections
SD Card Reader
You can use the USB cable to read the files saved on the SD card.
On the main menu screen, select Settings/Connect/SD card reader, and press
cess it.
to ac-
Follow these steps to use the SD card reader:
1.
2.
3.
4.
Insert the SD card to your phone.
Select Connect/SD card reader/On.
Connect your phone and PC with the USB cable.
“Found New Hardware” is displayed on your PC, and an icon indicating a new mobile
memory driver appears, by which you can operate the data in the SD card on your PC.
Note:
The function of SD card reader and the other functions using USB cable are incompatible. If you enable the SD card reader, the other functions using the USB
cable will be unavailable at once. If you need to recover the other USB functions,
disable the function of card reader.
After the function of SD card reader is enabled, you can not access the SD card
through the Gallery of your phone. To access it, disable the function of SD card
reader at first.
Since the function of SD card reader is enabled, if your phone had been restarted
and then you want to use the USB Modem function, you need to disable the function of SD card reader and set the USB Modem again.
Notes to the Functions of the Connections
Some of the data connection functions of the U526 phone can not be used simultaneously. It
HUAWEI
131
15 Connections
is described in detail as the following:
SD card reader
USB Modem
USB-based
synchronization
SD card reader
--
Unsupported
Unsupported
USB Modem
Unsupported
--
Unsupported
USB-based
synchronization
Unsupported
Unsupported
--
Data Account
You need to set the data account before you use your phone to access the Internet and send
multimedia messages.
Note:
The U526 provides five data accounts. Where, those preset by the network operators
can be browsed but can not be set, the others can be browsed and set.
The setup of the data account is different due to different networks and operators. For
details, please consult the local network operator.
On the main menu screen, select Settings/Connect/Data account:
1. Select a data account and press
to access the editing screen, and then use the
up/down scroll key to switch among the setting items. Press
to access the editing
status. Notice that the data accounts preset by the network operator can be browsed only.
132
HUAWEI
15 Connections
2. When the setting is finished, select Save. The settings are saved and it backs to the screen
of data account.
3. On the Data account screen, select a profile and then select Options/Rename to rename
the data account.
HUAWEI
133
16
Entertainment
This phone supports Java. You may download games or other applications and run them on
the phone. You can access the JAVA screen by selecting
from the main menu.
Applications & Games
You may download the latest Java games and applications by the browser. These downloaded
games and applications are automatically saved to the Applications and games folder.
Select a Java game or an application and then press
to run it. You can mute the music
by pressing the Record key and adjust the volume by pressing the Volume key.
Select Options, and then you can perform the following operations: update the version, delete the application, view the application information, create, move and delete a folder, set
the confirmation mode of permission, view the DRM properties and backup.
Select
You can access the selected Java games and applications.
Update
You can update the downloaded Java games and applications.
HUAWEI
135
16 Entertainm ent
Delete
You can delete the selected content.
Description
You can view the description of Java games and applications.
New Folder
You can create folders to classify and manage the downloaded Java games and applications.
The U526 phone supports to create 50 folders at most.
Move
You can move downloaded Java games and applications from one folder to another.
Permission
You can set whether your Java games and applications are protected, and select a protected
function according to actual demands.
Properties
You can view the DRM (Digital Right Management) information of the JAVA applications,
such as the use time limit and use times.
Backup
You can backup the applications and games to the SD Card or the DataFolder.
136
HUAWEI
16 Entertainm ent
Note:
You can perform backup operations upon the files that the DRM allows to be backed
up only.
Download More
You can select a bookmark from the Download catalog to open a corresponding link to
download games or applications you need. You can also open a Web page from the Browser
to download Java games and applications. Before downloading, you should first select profile. For details, please refer to “Vodafone Live! (Browser)/Select Profile”.
Entering the Download more, the screen displays the preset bookmark and created ones.
Entering a Bookmark Link
Select a bookmark and press
or press Options/Select to enter it.
Creating a Bookmark
Select Options/New, you can enter the screen for creating a bookmark. Enter a bookmark
name and bookmark URL, and then select Save. The U526 supports to create up to 10
bookmarks.
Modifying a Bookmark
You can modify a bookmark created by yourself. To do this, select Option/Modify, and then
you can modify the name and address of the bookmark.
HUAWEI
137
16 Entertainm ent
Deleting a Bookmark
You can delete a bookmark created by yourself. To do this, select Options/Delete, and then
confirm the deletion.
Setting to Default
The first bookmark on the download list on the “Download” screen is the default bookmark.
However, you can change the default bookmark setting. Select a bookmark that you want to
make it into a default and then select Options/Default.
Viewing Details
This option is used to view the details of a bookmark: “Bookmark Name” and “Bookmark
URL”.
Memory Status
Selecting this option, you can view the current memory status of your phone, including the
occupied memory space and the total available memory space.
138
HUAWEI
17
DRM
The U526 supports “Forward Lock”, “Combined delivery” and “Separated delivery” modes
defined in OMA DRM1.0. DRM (Digital Rights Management) is the solution for preventing
the digital contents from piracy and protecting the provider’s interests. Here, the digital contents include Java applications and the multimedia contents such as images, audio and video.
Being attached with the copyright information, theses contents are protected by DRM. The
DRM function controls the usages of these contents on terminals.
The contents that are forbidden to be forwarded and that are protected by DRM (the contents
obtained by “Forward lock” and “Combined delivery” modes) cannot be forwarded to other
devices through USB, serial port, MMS and so on. They cannot generate copies on the same
phone either. While, the contents that are protected by DRM and that are allowed to be forwarded (the contents obtained by “Separated delivery” mode) can be forwarded to other devices in any way the phone supports. And they cannot generate copies on the same phone.
Attaching copyright information may restrict the use times, use period and validity period in
accessing the protected contents. If the protected content cannot be accessed, it indicates that
the corresponding copyright has been overdue or used up. You can re-obtain the right for the
DRM files in “Separated delivery” mode.
You can find out the copyright information by viewing the properties of the DRM files. You
can also perform deleting, switching and updating functions upon the copyright.
The statuses of the files supported by the U526 are described as below:
HUAWEI
139
17 DRM
Type
Common
File
File with Copyright Protected File
Usable (Green lock)
Forwardable
Unforwardable
Unusable (Red lock)
Forwardable
Unforwardable
Audio
Video
Image
Select DRM setting from Security settings, and then press
and press
. Enter the correct PIN code
to confirm, you will have the following options:
Operation
Delete invalid right
Description
Here, you can delete the invalid rights.
Delete right without
media file
Here, you can delete the rights without media file.
Delete all rights
Here, you can delete all the rights.
140
HUAWEI
18
Settings
With this function you can change the settings of your phone. You can access the Settings
screen by selecting
from the main menu.
Call Forwarding
It is used to select a mode for forwarding incoming calls.
Selecting Call forwarding from the Settings screen and then press
following options:
, you will have the
All Calls
From the All calls menu, select one from the four items: Voice call, Fax call, Data call, and
All services. And then you have the following options for each:
HUAWEI
141
18 Settings
Option
Activate
Description
. Since then, all the
Enter a number to be forwarded to and press
incoming calls will be forwarded unconditionally to that number.
Deactivate
To cancel the service of forwarding all calls.
Check status
To view the current status of the service of forwarding all calls.
If out of Reach
From the If out of reach menu, you can select one from the four items: Voice call, Fax call,
Data call and All services. And then you have the following options for each:
Option
Activate
Description
. Now all the unEnter a number to be forwarded to and press
reachable calls will be forwarded unconditionally to this number.
Deactivate
To cancel the service of forwarding on unreachable calls.
Check status
To view the current status of forwarding unreachable calls.
If Busy
From the If busy menu, you can select one from the four items: Voice call, Fax call, Data
call and All services. And then you have the following options for each:
142
HUAWEI
18 Settings
Option
Activate
Description
. Now all the inEnter a number to be forwarded to and press
coming calls will be forwarded unconditionally to this number when
the phone is busy.
Deactivate
To cancel the service of forwarding when the phone is busy.
Check status
To view the current status of forwarding when the phone is busy.
If not Answered
From the If not answered menu, you can select one from the four items: Voice call, Fax call,
Data call and All services. And then you have the following options for each:
Option
Activate
Description
You can select a forward call delay time and press
to enter a
number to be forwarded to, and then press
to confirm. Now the
unanswered calls will be forwarded to this number according to the
delay time you have set.
Deactivate
To cancel the service of forwarding unanswered calls.
Check status
To view the current status of forwarding unanswered calls.
HUAWEI
143
18 Settings
Note:
It is possible that the network you are using does not support you to select Forward
now from the delay time list if not answered. For more information, please consult
the network operator.
Disable All
From the Disable all menu, you can select one from the four items: Voice call, Fax call,
Data call and All services. And then press
to disable all services of call forwarding.
Phone Setup
With this option you can change the settings related to the phone, including Language, Date
and time, Date format, Brightness, Backlight delay, Keypad backlight, Auto On and Off and
Greeting message.
Language
The U526 phone supports multiple languages. Select Settings/Phone setup/Language from
the main menu, and press
144
HUAWEI
to select a language:
18 Settings
Setup
Auto
Description
French
This option is used to set the language to be used in the phone according to the language used in your USIM card:
l If the language used in the USIM is Simplified Chinese, French or
English, the language used in the phone will be set automatically to
the Simplified Chinese, French or English respectively.
l If the language used in USIM is not Simplified Chinese, French nor
English, the language used in the phone will be set to English automatically.
Set to French.
English
Set to English.
Date and time
This option is used to change the system time of the phone.
Date format
This option is used to change the display format of the system time of the phone. Three formats are available: yy/mm/dd, mm/dd/yy, dd/mm/yy.
Brightness
It is used to set the brightness of the screen. Three levels are available.
HUAWEI
145
18 Settings
Backlight delay
It is used to set the backlight delay time of the screen. You can select one from 5 seconds, 15
seconds, 30 seconds and Always on.
Keypad backlight
It is used to turn on or off the keypad backlight.
Auto ON and OFF
This option is used to set your phone to power on or off automatically.
Step
Operation
Select to enable or disable the function of Auto ON and Auto OFF. If
you enable the function of Auto ON or Auto OFF, you need to set the
cycle time for them. To set the cycle, press
Set the time for auto powering on and off.
Select Option/Save to save your settings.
Greeting message
On the “Greeting message” screen, you can enter a welcome note that appears on the screen
when you switch on the phone.
146
HUAWEI
18 Settings
Profiles
With this option you can select different profiles for the phone so that it fits different environmental situations.
The U526 phone provides eight profiles including Normal, Meeting, Activity, Sleep, Car, Off
Line, Silent and My profile 1.
You can select a profile, press
also select Options/Edit to edit it.
or press Options/On to activate this profile. .You can
The relevant settings include incoming call ring tone settings, incoming message ring tone
settings, ring volume settings, earpiece volume settings, key pressing tone volume settings,
vibration settings, mute settings, flip tone settings, prompt tone settings, startup and shutdown tones settings.
Note:
to switch the current profile to the
In standby mode, you can press and hold
meeting profile. If the current profile is offline, you can not execute this function..
Call tone
The U526 phone provides ten standard ring tones for you to select. You can also download
some tones for incoming calls by selecting Download.
Message tone
The U526 phone provides four standard ring tones for you to select. You can also download
some tones for incoming messages by selecting Download.
HUAWEI
147
18 Settings
Tone volume
This option is used to set the volume of incoming call rings, incoming message rings and
alarm clock tones. You can press the up/right scroll key to increase the volume, and press the
down/left scroll key to decrease the volume.
Earpiece volume
It is used to adjust the volume of the earpiece. You can press the up/right scroll key to increase the volume, and press the down/left scroll key to decrease the volume.
Key tone volume
It is used to adjust the volume of pressing keys. You can press the up/right scroll key to increase the volume, and press the down/left scroll key to decrease the volume.
Vibration
This option is used to enable or disable the vibration prompt mode.
Silent
This option is used to enable or disable the silent mode.
Flip tone
This option is used to set whether to make a sound when you fold/unfold your phone.
148
HUAWEI
18 Settings
Prompt tone
This option is used to set whether to make a sound on a prompt.
On-Off tone
This option is used to set whether to be accompanied by music when you switch on or off the
phone.
Wallpaper
With this option you can select a type of wallpaper and set the wallpaper layout for the Home
screen.
The U526 phone provides standard wallpaper for you to select. You can also download some
wallpaper by selecting Download.
While setting the wallpaper, you can select Layout to set the layout of the wallpaper. Three
options are available: Tile, Fit-to-screen and Center.
Colour Themes
With this option you can change the color theme: You can select a different color theme for
the menu, prompt bar, title bar and the cursor.
Connect
The data connection function provides you with many data communication functions. You
can synchronize data between your phone and a PC by means of a USB cable. And you can
HUAWEI
149
18 Settings
use the built-in modem of your phone to establish a dialup connection to a PC to access the
Internet through this interface. For details of setup for this function, please refer to “Connections” on page 1.
Video Call Setup
Here, you can perform some common settings for the V-Call functions such as P-in-P,
switching display, image quality, forbidding video and auto voice call.
P-in-P
During a video call, your image can be shown on your phone. You can select P-in-P function
to arrange the positions of your image. You can also choose to close your image window.
Switch display
With this option you can switch between image windows: to display your image in the small
window and the other party’s image in the large window, or vice versa.
Image quality
Here, you can choose Best quality or More smooth for the image quality.
Forbid video
Here, you can set to open or close the video.
Auto voice call
If the other party’s phone does not support the V-Call service, with this option, your phone
will make a voice call automatically.
150
HUAWEI
18 Settings
Call Setup
You can set the features for making calls, including the following options: Auto redial, Answer mode, Call waiting, Auto answer, Select line, Call barring, Calling ID, Change call
barring password.
Auto redial
After the auto redial function is enabled, the phone will auto redial 5 times.when the call
fails.
Answer mode
It is used to decide the mode for answering an incoming call. Three options are available:
Open flip, Any key and Send key.
Call waiting
It is used to enable or disable the call waiting function. You can also view whether the call
waiting function is enabled by checking the status.
The call waiting function needs supports from the network. For more information, please
consult the service provider.
Auto answer
It is used to select a way for automatically answering calls. Select Auto answer from the
Call setup screen and then press
HUAWEI
151
18 Settings
Option
Description
Immediate answer
To answer an incoming call immediately.
Text message
To send a text message that is preset and chosen from the
“Common phrases” to the caller automatically when a call is
coming.
Recorded message
To answer an incoming call by playing recorded voice automatically.
Disable
To disable the auto answer function.
Select line
It is used to set the call line for your phone. Two options are available: Line 1 and Line 2.
Call barring
It is used to set the call barring mode for the phone.
Select Call barring from the Call setup menu, and then press
lowing options:
. You will have the fol-
All Outgoing Calls
From the All outgoing calls screen, you can select one from the four items: Voice call, Fax
call, Data call and All services. And then you have the following options for each:
152
HUAWEI
18 Settings
Option
Activate
Deactivate
Check status
Description
to start the call barring
Enter call barring password and press
service so that the phone cannot be used to make calls.
Enter call barring password and press
to cancel the call barring
service so that the phone resumes call service.
View whether the phone has started the call barring service for barring
all outgoing calls.
Intl. Calls
From the Intl. calls screen, you can select one from the four items: Voice call, Fax call, Data
call and All services. And then you have the following options for each:
Option
Activate
Deactivate
Check status
Description
Enter call barring password and press
to start the call barring
service so that the phone cannot be used to make international calls.
Enter call barring password and press
to cancel the call barring
service so that the phone can be used to make international calls again.
View whether the phone has started the call barring service for making
international calls.
Intl. Calls Except to Home Country
From the Intl. calls except to home ctry. screen, you can select one from the four items:
HUAWEI
153
18 Settings
Voice call, Fax call, Data call and All services. And then you have the following options for
each:
Option
Activate
Deactivate
Check status
Description
Enter call barring password and press
to start the service of
barring Intl. Calls Except to Home Country. Then, you cannot dial out
international call numbers except to those of the host countries with
your phone when it is in international roaming.
Enter call barring password and press
to cancel the service of
barring Intl. Calls Except to Home Country. Then, you can dial out
international call numbers with your phone when it is in international
roaming.
View whether the phone has enabled the service of barring Intl. Calls
Except to Home Country
All Incoming Calls
From the All incoming calls screen, you can select one from the four items: Voice call, Fax
call, Data call and All services. And then you have the following options for each:
154
HUAWEI
18 Settings
Option
Activate
Deactivate
Check status
Description
to start the call barring
Enter call barring password and press
service so that all the incoming calls will be barred.
Enter call barring password and press
to cancel the call barring
service so that the phone can be used to answer calls.
View whether the phone has started the call barring service for barring
all incoming calls.
Incoming Calls when Abroad
From the Incoming calls when abroad screen, you can select one from the four items: Voice
call, Fax call, Data call and All services. And then you have the following options for each:
Option
Activate
Deactivate
Check status
Description
Enter call barring password and press
to start the call barring
service so that the phone cannot be used to answer calls when it roaming out of the home country.
Enter call barring password and press
to cancel the call barring
service so that the phone can be used to answer calls when it is roaming out of the home country.
View whether the phone has started the call barring service for barring
incoming calls when it is roaming out of the home country.
HUAWEI
155
18 Settings
Disable All
From the Disable all screen, you can select one from the four items: Voice call, Fax call,
Data call and All services, and enter call barring password. Then, press
call barring services.
to cancel all
My number
With this function, you can view the phone numbers saved on the USIM card. You can select
Options to edit or delete the records.
Calling ID
This option allows you to select whether your phone number will be shown on the called
phone.
Select Calling ID from Call setup screen and press
lowing options:
Option
, and then you will have the fol-
Description
Auto
Whether your phone number will be shown on the called phone depends on the network.
Send
Your phone number will be shown (if the network has enabled this
service).
Hide
Your phone number will not be shown (if the network has enabled this
service).
156
HUAWEI
18 Settings
Call Barring Password
This function is used to change the password for call barring.
Select Call barring password from the Call setup screen and then press
can change the call barring password.
Operation
. Now you
Description
Enter old password
Enter the old call barring password (It is provided by your network operator if it is the first time for you to change the password).
Enter new password
Enter a new call barring password (which is preferred by yourself).
Re-enter new password
Enter once again the new call barring password, and then press
or the left function key to save it.
Network Setup
From here you can change settings related to the network.
Select Network from the Settings screen and press
tions for setting the network:
. Then, you have the following op-
HUAWEI
157
18 Settings
Setting
Description
Mode
You can specify a network from the following:
l WCDMA
l GSM
l Auto
If you select Auto, the phone will automatically search for the
signal of the network where your phone is located.
Network selection
You can select a network run by different operators. The phone
provides you with two modes:
l Auto
l Manual
The “Auto” mode enables the phone automatically to search for
networks and register it to a network. The “Manual” mode enables the phone to search for networks, after which you can
specify a network from a list for register.
Roaming
You can set your phone to be in roaming status. Two options are
available:
l Roaming
l No roaming
You can view and edit the network information saved in the
USIM card at present, also, you can add new information to it.
My PLMN List
Security Setup
Here you can change settings related to phone security.
Select Security from Settings, and press
158
HUAWEI
to enter the correct phone password (The
18 Settings
initial password is 0000). And then press
ting items appear:
to confirm. Then, the following security set-
Reset
If you select Reset, the settings you performed will be reset to the default ones preset by the
manufacturer.
Password lock
This option is used to enable or disable the “Phone password locked” and “PIN locked”
modes.
Follow these steps:
HUAWEI
159
18 Settings
Operation
Phone password
locked
Description
1. Select Phone password locked and press
to enter.
2. Press the up/down scroll key to select On or Off.
3. If select On, press
to enter.
4. Enter the phone password and finish the setting.
PIN locked
1. Select PIN locked and press
to enter.
2. Press the up/down scroll key to select On or Off.
3. If the selected status is the same as the current status, press
to set directly the PIN. However, if the selected status
is different from the current status, after pressing
need enter the PIN code.
you
Change password
Here you can modify the phone password and PIN code.
Select Change password from Security settings, and then press
following options:
160
HUAWEI
, you will have the
18 Settings
Operation
Change phone password
Change PIN
Description
1. Enter the old phone password (The initial password of the
U526 is 0000).
2. Enter a new phone password.
3. Enter the new phone password again and finish the setting.
When the “PIN locked” function is enabled, you can change the
PIN code. Follow these steps:
1. Enter the old PIN code.
2. Enter a new PIN code.
3. Enter the new PIN code again and finish the setting.
Note:
To modify the PIN code, you must set the “PIN locked” to “On” first.
Fixed Dialer Number
If your USIM card supports the FDN (Fixed Dialer Number) function, you can set limits for
phone numbers to be dialed.
Select Fixed dialer number from Security settings, and then press
following options:
, you will have the
HUAWEI
161
18 Settings
Operation
On
Off
FDN list
Description
If you select this option, you will be able to dial the numbers in the FDN
list only. To enable this function, you need to enter the correct PIN2 code.
If you select this option, you will be able to dial any number.
It is used to preset the fixed dialer numbers. To set it, you need to enter
the correct PIN2 code.
DRM
For details, please refer to “DRM” on page 1.
162
HUAWEI
19
Warnings and Precautions
Electronic Device
Switch off your phone near high-precision electronic devices. The phone may affect the performance of these devices.
Such devices include hearing aids, pacemakers, fire alarm systems, automatic gates, and
other automatic-control devices. If you are using an electronic medical device, consult the
device manufacturer and confirm whether the radio wave affects the operation of this electronic device.
Hospital
Pay attention to the following points in hospitals or health care facilities:
Do not take your phone into the operating room (OR), intensive care unit (ICU), or coronary care unit (CCU).
Do not use your phone at places for medical treatment where it is prohibited to use mobile
phones.
When you use your phone near someone who is suffering from a heart disease, turn down
the ring tone volume or vibration properly so that it does not influence the person.
Area with flammables and Explosives
In the area with inflammables and explosives, turn off your phone and do not take out, install
HUAWEI
163
19 Warnings and Precautions
or charge the battery to avoid explosion and fire. The area with inflammables and explosives
include:
Gas station
Area for storing fuels (such as the bunk under the deck of a ship)
Device/Vehicle for transporting and storing fuels or chemical products
Area with chemical substances and particles (such as: granule, dust, metal powder) in the
air
Area with the sign of Explosives
Area with the sign of Turn off bi-direction wireless equipment
Area where it is generally suggested to stop the engine or a vehicle
Traffic Safety
Please observe the relevant regulation of the area or country where you are. Do not use
your phone while driving to avoid traffic accident.
Secure the phone on its holder. Do not place the phone on the seat or other places where it
can get loose in a sudden stop or collision.
Use the phone after the vehicle stops at a safety place.
If there is handsfree function in your phone, or the phone can be used with earphones, or
there is any vehicle-mounted equipment with handsfree mode, use them in emergency.
Do not place the phone over the air bag or in the air bag outspread area. Otherwise, the
phone may hurt you owing to the strong force when the air bag inflates.
Observe the rules and regulations of airline companies. On or nearby a plane, turn off the
phone and take out the battery. In areas where it is prohibited to use mobile phones, turn
off the phone. Otherwise, the wireless signal of the phone can disturb the plane control
signals. Switch off your phone before boarding an aircraft.
164
HUAWEI
19 Warnings and Precautions
Storage Environment
Do not place magnetic storage media such as magnetic cards and floppy disks near the
phone. Radiation from the phone may erase the information stored on them.
Do not put your phone, battery, or other accessories in containers with strong magnetic
field, such as the induction cooker and microwave oven. Otherwise, circuit failure, fire, or
explosion can be caused.
Do not leave your phone, battery, or charger in a very hot or cold place. Otherwise, malfunction of the products, fire, or explosion can be caused.
Do not place sharp metal objects such as pins near the earpiece. The earpiece may attract
these objects and hurt you when you are using the phone.
Do not subject your phone, battery, and charger to serious collision or shock. Otherwise,
battery leakage, phone malfunction, overheat, fire, or explosion can be caused.
Do not put your phone in the pocket on the back side of trousers or a skirt to avoid phone
damage while seating.
Do not place sharp metal objects such as keys near your phone in case of scraping the surface.
Children Safety
Put your phone, battery, and charger in places beyond the reach of children. Do not allow
children to use the phone, battery, or charger without guidance.
Do not allow children to put the battery in mouth, for electrolyte in the battery is poisonous.
Do not allow children to touch the small fittings. Otherwise, suffocation or gullet jam can
be caused if children swallow the small fittings.
HUAWEI
165
19 Warnings and Precautions
Operating Environment
The phone, battery, and charger are not water-resistant. Keep them dry. Protect the phone,
battery and charge from water or vapor. Do not touch the phone with a wet hand. Otherwise, Otherwise, short-circuit and malfunction of the product or electric shock can be
caused.
Do not use the phone in dusty, damp and dirty places or places with magnetic field. Otherwise, malfunction of the circuit can be caused.
Do not turn on or off the phone when it is near your ears to avoid negative impact on your
health.
When you carry or use the phone, keep the antenna at least one inch (2.5 centimeters)
away from your body, to avoid negative impact on your health caused by radio frequency
leakage.
If you feel uncomfortable (such as falling sickness or qualm) after playing games with
your phone for a long time, please go to see a doctor immediately.
When you use the phone in the handsfree mode, do not put it too close to your ears. Otherwise, your hearing may be hurt by the loud volume.
Do not use an optical amplifier to check the infrared interface, if any, on your phone.
If your phone can take pictures, do not put the flash lamp near your eyes or any other’s
eyes.
If there is a touch-pen, use it gently to avoid scratch on your phone or screen.
On a thunder stormy day, do not use your phone outdoors or when it is being charged.
Do not touch the antenna when a call is going on. Touching the antenna may affect call
quality and cause the phone to operate with more power. As a result, the talk-time and
standby time are shortened.
The phone may interfere nearby TV sets, radios and PCs.
In accordance with the international standards for radio frequency and radiation, use phone
accessories approved by Huawei only.
166
HUAWEI
19 Warnings and Precautions
Cleaning and Maintenance
Before you clean or maintain the phone, turn off the phone and disconnect it from the
charger. Otherwise, electric shock or short-circuit of the battery or charger may be caused.
Do not use any chemical detergent, powder, or other chemical agent (such as alcohol and
benzene) to clean the phone and the charge. Otherwise, part damage or a fire can be caused.
You can clean the phone and the charger with a piece of soft antistatic cloth that is a little
wet.
Do not scratch the shell of the phone. Otherwise, the shed coating may cause skin allergy.
Once it happens, stop using the phone at once and go to see a doctor.
Keep the plug dry when you clean it, to prevent fire.
If the phone or any of its fittings does not work, turn to the local authorize sevice center for
help.
Emergency Call
You can use your phone for emergency calls. However, connections in all conditions cannot
be guaranteed. You should never rely solely on the phone for essential communications.
Battery
Use the battery approved by the manufacturer only. Otherwise, explosion can be caused.
Do not dispose of the battery in fire. Otherwise, the battery may ignite or explode.
Do not connect two poles of the battery with conductors such as cables, jewelries or any
other metal material. Otherwise, the battery is short-circuited and it may burn your body.
Do not disassemble the battery or solder the battery poles. Otherwise fluid leakage, overheat, fire, or explosion can be caused.
If there is battery leakage, smoke, or strange smell, stop using the battery and keep it away
from open flame to avoid fire or explosion. Then turn to an authorized maintainer for help.
HUAWEI
167
19 Warnings and Precautions
If the battery fluid contacts skin or cloth, wash with clean water immediately to avoid irritation to the skin.
If the battery fluid gets into eyes, do not rub your eyes. Otherwise, your eyes can be hurt.
Wash with clean water and seek medical assistance immediately.
If there is battery deformation, color change or abnormal heating while you charge or store
the battery, take it out immediately and stop using it any more. Otherwise, battery leakage,
overheat, expolsion, or fire can be caused.
When installing the battery on your phone, do not push the battery by force lest battery
fluid leak out or the battery crack.
Do not take out the battery when the phone is turned on.
If you do not use the battery for a long time, store it in normal temperature after charging.
Charger
Use the charger approved by the phone manufacture only. Any violation of this rule may
result in fire or malfunction of the charger.
Do not short-circuit the charger. Short-circuiting the charger may cause fire or malfunction
of the charger.
If the power cord is damaged (for example, the lead is exposed or broken), or the plug
becomes loose, stop using the cable at one. Otherwise, electric shock, short-circuit of the
charger, or fire can be caused.
Keep the charger away from water (or other liquid) or containers containing water (or
other liquid). Once wather or other liquid leaks into the charger, electrical leakage or other
faults can be caused.
Do not use the charger in a dusty and damp environment. Keep the power cord away from
any heating appliance.
Ensure the plug of the charger is properly inserted into the power socket when charging the
battery. Improper insertion may result in electric shock, fire, or explosion. To unplug the
charger, pull the plug off rather than tear the power cord.
Use the AC power supply defined in the specifications of the charger. An improper power
voltage can cause file or malfunction of the charger.
168
HUAWEI
19 Warnings and Precautions
Do not place any heavy object on the power cord of the charger. Do not damage, change,
or pluck the power cord. Otherwise electric shock or file can be caused.
When you are charging the battery with the charger, do not touch the plug, power cord or
the charger with a wet hand. Otherwise, electric shock can be caused.
Once the liquid such as water leaks into the charger, remove the plug of the charger from
the socket immediately. Otherwise, overheating, fire and other mulfuction can be caused.
Using the USB Cable
To use the USB cable, you need operate abiding strictly by the following rules. Otherwise,
your phone or PC may be damaged:
To connect your phone and PC with the USB cable, connect to the phone at first, and then
connect to the PC.
In the process of communication between your phone and PC, it is strictly forbidden to
plug or pull out the USB cable.
To disconnect your phone and PC from the USB cable, disconnect from the PC at first, and
then disconnect from the phone.
Rules for Exposure to Radio Frequency Energy
THIS DEVICE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO
RADIO FREQUENCY ELECTROMAGNETIC FIELD.
Your mobile phone is a low-power radio transmitter and receiver. When it is turned on, it
emits low levels of radio frequency energy (also known as radio waves or radio frequency
fields).
Governments around the world have adopted comprehensive international safety guidelines,
developed by scientific organizations, e.g. ICNIRP (International Commission on
Non-Ionizing Radiation Protection) and IEEE (Institute of Electrical and Electronics EngiHUAWEI
169
19 Warnings and Precautions
neers Inc.), through periodic and thorough evaluation of scientific studies. These guidelines
establish permitted levels of radio wave exposure for the public. The levels include a safety
margin designed to assure the safety of all persons, regardless of age and health, and to account for any variations in measurements.
Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio frequency energy absorbed by the body when using a mobile phone. The SAR value is determined at the highest certified power level in laboratory conditions, but the actual SAR level
of the mobile phone while operating can be well below the value. This is because the mobile
phone is designed to use the minimum power required to reach the network.
All models of Huawei’s mobile phone are designed to meet radio frequency exposure guidelines. Before a phone model is available for sale to the public, it must be tested according to
the IEEE Std C95.1 – 1999, RSS-102, Canada’s Safety Code 6 , and EN 50361 and does not
exceed the limit of FCC rule §2.1093, the ANSI/IEEE C 95.1:1999, the NCRP Report Number 86 for uncontrolled environment, and the Health Canada’s Safety Code 6 and the Industry Canada Radio Standards Specification RSS-102 for General Population/Uncontrolled
exposure, and also does not exceed the limit established by the European Council Recommendation: 1999/519/EC for safe exposure.
The SAR limit adopted by the IEEE Std C95.1 – 1999, RSS-102, and Canada’s Safety Code
6 is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The highest SAR value for
this device type when tested at the head is 0.752 W/kg.
The SAR limit adopted by the IEEE Std C95.1 – 1999, RSS-102, and Canada’s Safety Code
6 is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The highest SAR value for
this device type when tested at the body is 0.490 W/kg.
The SAR limit adopted by the 1999/519/EC is 2.0 watts/kilogram (W/kg) averaged over ten
gram of tissue. The highest SAR value for this device type when tested at the head is 0.890
W/kg.
170
HUAWEI
19 Warnings and Precautions
Environmental Protection
Please observe the local regulations regarding the disposal of your packaging materials, exhausted battery and old phone and please promote their recycling. Do not dispose of exhausted battery or old phone in a dustbin or fire. Otherwise, explosion can be caused.
HUAWEI
171
20
Abbreviations and Acronyms
DCF
DRM Content Format
DRM
Digital Rights Management
FDN
Fixed Dial Number
GPRS
General Packet Radio Service
GSM
Global System for Mobile communication
OTA
Over-The-Air
PIN
Personal Identification Number
PUK
PIN Unblocking Key
SD
Secure Digital Card
SAR
Specific Absorption Rate
STK
SIM Tool Kit
URL
Universal Resource Locator
USB
Universal Serial Bus
WAP
Wireless Application Protocol
WCDMA
Wideband code division multiple access
Ver: V1.10
BOM: 31015765
HUAWEI
173

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Title                           : confidentiality letter.doc
Author                          : d24418
Creator                         : pdfFactory Pro www.fineprint.com.cn
Producer                        : pdfFactory Pro 2.25 (Windows XP Chinese)
Create Date                     : 2005:11:13 16:55:24
Page Count                      : 185

EXIF Metadata provided by EXIF.tools

Huawei Technologies U526 WCDMA/GPRS/GSM Mobile Phone User Manual confidentiality letter

Huawei Technologies Co.,Ltd WCDMA/GPRS/GSM Mobile Phone confidentiality letter

Exhibit 08 User Manual

FCC ID Filing: QISU526

Navigation menu

Namespaces

Views

Navigation