Hugo Boss 1512323 Users Manual ManualsLib Makes It Easy To Find Manuals Online!
2014-12-11
: Hugo-Boss Hugo-Boss-1512323-Users-Manual-120243 hugo-boss-1512323-users-manual-120243 hugo-boss pdf
Open the PDF directly: View PDF .
Page Count: 20
Download | |
Open PDF In Browser | View PDF |
WATCH CARE AND MAINTENANCE, OPERATING INSTRUCTIONS WARRANTY AND SERVICE GUIDE oPeRaTInG InsTRUCTIons 2- and 3-Hand Models TABLE OF CONTENTS 2- and 3-Hand Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Date/Big Date Display Models - Type A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Date/Big Date Display Models - Type B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Crown Automatic Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1 Multi-Eye Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Multi-Eye Models with Retrograde Day/Date. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2 Seconds hand Multi-Eye Models with Date/24-Hour Hand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Multi-Eye Models with Day/Date/24-Hour Hand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Multi-Eye Models with Month/Day/24-Hour Hand/Date . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Dual-Time Retrograde Models with Big Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Dual-Time GMT Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Chronographs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Analog Chronographs 1/1 of a Second – Type A with center-mounted chronograph seconds hand and chronograph minutes counter Crown Positions: Position 1 - Normal position Crown pushed against case Position 2 - To set TIME: Rotate crown in either direction . . . . . . . . . . . . . . . . . . 13 Analog Chronographs 1/1 of a Second – Type B with center-mounted chronograph seconds hand, chronograph hour and minutes counters and small seconds subdial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Analog Chronographs 1/1 of a Second - Type C with small chronograph seconds and 24-hour hands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Analog Chronographs 1/1 of a Second - Type D with small chronograph seconds and 24-hour hands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Analog Chronographs 1/10 of a Second . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Analog Chronographs 1/20 of a Second . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Regatta Chronograph . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 448 11-3-04 11-3-04 Removable Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Interchangeable Bracelet/Strap Models Tension-pin style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Interchangeable Bracelet/Strap Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Hook and bar style Convertible Bracelet/Strap Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Boss Black Racing Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Warranty & Service Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 BOSS ORANGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 - 36 1 oPeRaTInG InsTRUCTIons oPeRaTInG InsTRUCTIons Date/big Date Display Models - Type a Date/big Date Display Models - Type b Big Date display Crown 1 2 2 7 60 3 15 45 30 Crown 1 2 3 Small seconds hand Date display Crown Positions: Crown Positions: Position 1 - Normal position Crown pushed against case Position 1 - Normal position Crown pushed against case Position 2 - To set DATE*: Rotate crown clockwise Position 2 - To set DATE/BIG DATE*: Rotate crown clockwise NOTE: For models with DAY/DATE display(s): Rotate crown clockwise to set DATE, And counterclockwise to set DAY NOTE: For models with DAY/DATE display(s): Rotate crown clockwise to set DATE, And counterclockwise to set DAY Position 3 - To set TIME: Rotate crown in either direction Position 3 - To set TIME: Rotate crown in either direction *CAUTION: Never set the date when the hands are between 9:00 PM and 3:00 AM Doing so could damage the calendar mechanism Big Date models feature an oversized date window with two singledigit disks that rotate independently of one another *NOTE: If the Date/Big Date is set between 9:00 PM and 3:00 AM, the date may not change on the following day NOTE: The functioning of the watch is not affected during date setting When the watch is running, the date will change gradually during the period from 9:00 PM to 3:00 AM NOTE: The functioning of the watch is not affected during date setting When the watch is running, the date will change gradually during the period from 9:00 PM to 3:00 AM 2 3 oPeRaTInG InsTRUCTIons oPeRaTInG InsTRUCTIons automatic Models Multi-eye Models Minute hand Hour hand 60 Day hand 05 Crown 1 2 25 30 35 Seconds hand 20 40 15 45 10 50 55 The motion of your arm during normal daily activities should be sufficient to keep your automatic watch wound However, if you have not worn your watch for several days and it has stopped, you will need to wind the movement by hand before setting the time Crown Date hand 1 2 3 24-Hour time hand Second hand Multi-eye watches are powered by multi-function movements that enable them to report such information as month, weekday and date via apertures or “eyes” in the dial To wind the Movement: With the crown in position 1, flush against the case, turn the crown clockwise, completing approximately 15 to 20 revolutions, then gently but quickly move the watch back and forth several times to start movement To set the Time: Once the watch is running, pull the crown out to position 2 and turn it in either direction to set hands to desired time, then push crown back in to position 1 Project #: 926 Auto Designer: 4 Tatiana G Creation: 10/30/07 Modification: 4/16/08 Project #: 925 Designer: 5 Tatiana G Creation: 10.26.07 Modification: 4.28.08 oPeRaTInG InsTRUCTIons oPeRaTInG InsTRUCTIons Multi-eye Models with Retrograde Day/Date Multi-eye Models with Date/24-Hour Hand Hour hand Minute hand Minute hand Date hand Hour hand Crown Day hand Crown 1 2 3 Date display Seconds hand Seconds hand 24-Hour hand Crown Positions: Crown Positions: Position 1 - Normal position Crown pushed against case Position 1 - Normal position Crown pushed against case Position 2 - To set DATE*: Rotate crown counterclockwise To set DAY: Rotate crown clockwise Position 2 - To set DATE*: Rotate crown counterclockwise Position 3 - To set TIME: Rotate crown in either direction Position 3 - To set TIME: Rotate crown in either direction *NOTE: If the Date is set between 9:00 PM and 3:00 AM, the date may not change on the following day *NOTE: If the Date is set between 9:00 PM and 1:00 AM, the date may not change on the following day 6 7 oPeRaTInG InsTRUCTIons oPeRaTInG InsTRUCTIons Multi-eye Models with Day/Date/24-Hour Hand Multi-eye Models with Month/Day/24-Hour Hand/Date Day hand Crown Date hand 1 Second hand 2 3 1 Pull crown out to position 3 8 3 When desired day is reached, push crown back in to position 1 Crown 1 2 3 Date display Push button B Quick correction of second time zone/24-hour hand 24-hour time hand To set Day, Time and Date: To set Hour, Minute and 24-Hour Time: NOTE: It is important to follow steps in this sequence: 1 Pull crown out to position 3 1 Pull crown out to position 3 2 Turn crown clockwise to set Hour, Minute and 24-Hour hands to desired time 2 Turn crown clockwise until Day hand points to correct day 2 Turn crown clockwise: Day hand will advance by 1 day each time the hour and minute hands pass 4:00 AM (04:00) Push button A Quick correction of month Second hand 24-Hour time hand To set Day: Minute hand Month hand Hour hand Day hand To set Month: 1 With crown in position 1, press and release Push Button a to set Month to desired one; Month hand will advance 1 month with each push CAUTION: To prevent possible damage to your watch mechanism, do not use Quick Correction of Month feature on 31st day of any month when automatic month change is already in progress 3 Push crown back in to position 1 NOTE: While watch is running, hand indicating day of week will gradually and automatically advance between midnight and about 5:30 AM To set second Time Zone: 1 With crown in position 1, press and release Push Button b to set 24-Hour hand to desired time; hand will advance 1 hour with each push 3 With crown still in position 3, continue turning crown clockwise until 24-Hour hand indicates correct hour (Ex: noon is hour “12”, midnight is hour “24”, 9:00 AM is hour “9”, 9:00 PM is hour “21”, etc ), and hour and minute hands point to accurate time To set Date: 1 Pull crown out to position 3 4 Push crown in one click to position 2 2 Turn crown clockwise: Date hand will advance by 1 number each time the hour and minute hands pass midnight (00:00) 5 Turn crown counterclockwise until Date hand points to correct date 3 When desired date is reached, push crown back in to position 1 6 Push crown in to position 1, flush against case Your watch is now set to correct day, time and date Quick Correction of Date: 1 Pull crown out to position 2 2 Turn crown clockwise to advance Date hand step-by-step Note: 3 When desired date is reached, push crown back in to position 1 Project #: 500 Designer: Rome S Creation: 05.20.05 Modification: 11.29.05 CAUTION: To prevent possible damage to your watch mechanism, do not use Quick Correction of Date feature between 9:00 PM (21:00) and 12:30 AM (00:30) when automatic date changes are already in progress Project #: 925 Designer: 8 Tatiana G Creation: 10.26.07 Modification: 4.28.08 9 oPeRaTInG InsTRUCTIons oPeRaTInG InsTRUCTIons Dual-Time Retrograde Models with big Date Dual-Time GMT Models Hour hand Minute hand Hour hand Minute hand Big Date display NOTES: Setting the Hour hand on the exact hour provides the most accurate time setting If the Hour hand is set between hours, it may prevent the time from being accurately displayed and read The Date is synchronized with this Hour hand; be sure to take AM/PM time into account when adjusting it Date display Crown Crown To set Date: The Date is synchronized with the time in the first time zone G GMT 1 Seconds hand 2 3 1 Pull crown out to Position 2 2 Rotate crown counterclockwise to adjust Date Retrograde dual time display (24-hour hand) GMT Hand 3 Push crown back in to Position 1 Seconds hand Crown positions: NOTE: If the Date is set between 9:00 PM and 1:00 AM, the date may not change on the following day Your watch features a dual-time dial with 24-hour GMT hand that allows you to monitor the time in a second time zone anywhere in the world Position 1 - Normal position Crown pushed against case Reading the Watch: Position 2 - To set BIG DATE*: Rotate crown clockwise To set DUAL-TIME/RETROGRADE 24-HOUR HAND: Rotate crown counterclockwise Position 3 - To set TIME: Rotate crown in either direction In this illustration: The current time in the first time zone is 10:10’32” (10:10 PM) as indicated by the Hour and Minute hands on the outer 12-hour ring The current time in the second time zone is 11:10’32” (11:10 AM) as indicated by the GMT hand on the inner 24-hour ring NOTE: The seconds hand will stop moving while hour and minute hands are being set, allowing time to be set to the nearest second NOTES: The Minute and Seconds hands are the same for both time zones The Date is synchronized with the time in the first time zone ALWAYS set/adjust the 24-hour GMT hand (second time zone) first, then set the time in the first time zone To set 24-Hour GMT Hand (second time zone): 1 When Seconds hand reaches 12 o’clock, pull crown out to Position 3 2 Rotate crown in either direction until 24-hour GMT hand and Minute hand indicate desired time in second time zone 3 When adjusting the Minute hand, move it approximately 10 minutes past the desired time, then move it back to the desired position to ensure accurate time adjustment This step synchronizes the regular Hour (first time zone) hand 4 Take an accurate time signal (from a radio news station, for example) As soon as audible tone signals exact time, push crown back in to position 1 To set Time (first time zone): 1 Pull crown out to Position 2 2 Rotate crown clockwise to set Hour hand to desired time: It will advance in 30-minute leaps for quick adjustment 3 Push crown back in to Position 1 10 11 Hour hand oPeRaTInG InsTRUCTIons oPeRaTInG InsTRUCTIons Chronographs analog Chronographs 1/1 of a second – Type a with center-mounted chronograph seconds hand and chronograph minutes counter Chronograph minute hand A Minute hand Hour hand Crown 1 B Chronograph seconds hand 2 3 Date display Minute hand Chronograph minute hand A Minute hand 1 Small seconds hand B Chronograph seconds hand A chronograph combines two time-keeping functions: In addition to indicating the time on its dial, a chronograph can also be operated like a stopwatch to measure intervals of time Small seconds hand Crown 2 3 Date display 5 ATM Chronograph seconds hand Small seconds hand 1 2 3 B Date display Chronograph minute hand Crown positions: 4 Repeat steps 2 and 3 until event is ended Position 1 - Normal position Crown pushed against case 5 Push button b to reset to zero Position 2 - To set DATE*: Rotate crown counterclockwise After a battery change or in the event of an error, you may need to manually adjust the chronograph seconds hand to align it correctly at the zero position: To synchronize Chronograph Hands: Position 3 - To set TIME: Rotate crown in either direction 1 Pull crown out to position 2 *NOTE: If the Date is set between 9:00 PM and 3:00 AM, the date may not change on the following day 2 Push button a to adjust chrono seconds hand: Each push on button a will advance chrono hand by one second Press and hold button a to advance hand rapidly To operate the Chronograph: The chronograph function on these models can be used to time an event up to 59 minutes/59 seconds in duration, in whole second increments Use Buttons a and b to operate the stopwatch timer 3 Once hand is properly aligned, push crown back in to position 1 IMPORTANT: Crown must be in position 1, and chronograph hands must be at 60 (zero) before stopwatch is started Do not use chronograph while crown is pulled to position 2 or 3 If necessary, press button b to reset chrono hands to zero before you start timing simple chronograph functions: To measure the duration of a single, non-stop event: 1 Press button a to start chronograph 2 Press button a a second time to stop chronograph 3 Press button b to reset chronograph to zero To measure the combined time of a series of shorter events (for example, the actual playing time of a football match, where play is repeatedly interrupted): 1 Push button a to start the stopwatch when the event begins 2 Push button a to stop the timing when the event is halted 3 Press button a again when the event resumes 12 24-Hour display A Crown Hour hand 13 oPeRaTInG InsTRUCTIons oPeRaTInG InsTRUCTIons analog Chronographs 1/1 of a second – Type b with center-mounted chronograph seconds hand, chronograph hour and minutes counters and small seconds subdial analog Chronographs 1/1 of a second - Type C with small chronograph seconds and 24-hour hands 3 Press button a again when the event resumes Small seconds hand Hour hand A 5 Push button b to reset to zero To synchronize Chronograph Hands: Minute hand Chronograph hour hand Chronograph seconds hand 4 Repeat steps 2 and 3 until event is ended Chronograph minute hand After a battery change or in the event of an error, you may need to manually adjust the chronograph seconds hand to align it correctly at the zero position: Crown 1 2 3 B 1 Pull crown out to position 2 2 Push button a to adjust chrono seconds hand: Each push on button a will advance chrono hand by one second Press and hold button a to advance hand rapidly Date display 3 Once hand is properly aligned, push crown back in to position 1 Crown positions: Position 1 - Normal position Crown pushed against case Seconds hand Small chronograph seconds hand Date display To operate the Chronograph: NOTE: The chronograph function can be used to time an event up to 60 minutes in duration, in whole second increments Minute hand Hour hand Chronograph minute counter IMPORTANT: Crown must be in position 1, and chronograph hands must be at 60 (zero) before stopwatch is started Do not use chronograph while crown is pulled to position 2 or 3 If necessary, reset hands to zero following instructions below A Crown 26 1 2 B 3 Use push-buttons a and b operate the stopwatch timer: 1 Press a to start the stopwatch 2 Press a a second time to stop the stopwatch; read elapsed time indicated by chrono minute and seconds hands 24-Hour hand (indicates time on a 24-Hour basis) 3 Press b to reset all chronograph hands to zero To adjust the Chronograph Hands: 1 Pull crown out to position 3 This chronograph can be used to time events up to 59 minutes/59 seconds in duration, in whole second increments 2 Press and release push-buttons to reset chronograph minute and small seconds hands to 60 (zero) position: To set the Time and Date: NOTES: Chronograph hands must be in the 12:00 (zero) position before setting date and time • Pressing b will move hands clockwise • Pressing a will move hands counterclockwise 3 When hands reach 60 (zero), push crown back in to position 1 Do not press push-buttons when crown is in position 2, or chronograph hands will move Position 2 - To set DATE*: Rotate crown counterclockwise Do not set date between 9:00 PM and 1:00 AM, or date may not change properly If it is necessary to change date during this time period, first change time to any hours outside this period, set date, then reset correct time Position 3 - To set TIME: Rotate crown in either direction *NOTE: If the Date is set between 9:00 PM and 3:00 AM, the date may not change on the following day 1 Pull crown out to position 2 To operate the Chronograph: 2 Turn crown clockwise until previous day’s date appears The chronograph function on these models can be used to time an event up to 11 hours/59 minutes/59 seconds in duration, in whole second increments Use Buttons a and b to operate the stopwatch timer 3 As soon as seconds hand reaches the 12:00 position, pull crown out to position 3 Watch will stop 4 Turn crown to advance hour and minute hands past 12:00 to the correct time, making sure the 24-hour hand is set correctly Date will change automatically IMPORTANT: Crown must be in position 1, and chronograph hands must be at 60 (zero) before stopwatch is started Do not use chronograph while crown is pulled to position 2 or 3 If necessary, press button b to reset chrono hands to zero before you start timing 5 Take an accurate time signal (from a radio news station, for example) When audible tone signals the precise time, push crown back in to position 1, flush against case Watch will restart, now set to the exact second simple chronograph functions: To measure the duration of a single, non-stop event: 1 Press button a to start chronograph 2 Press button a a second time to stop chronograph 3 Press button b to reset chronograph to zero To measure the combined time of a series of shorter events (for example, the actual playing time of a football match, where play is repeatedly interrupted): 1 Push button a to start the stopwatch when the event begins 2 Push button a to stop the timing when the event is halted 14 15 oPeRaTInG InsTRUCTIons analog Chronographs 1/1 of a second - Type D with small chronograph seconds and 24-hour hands To measure the combined time of a series of shorter events (for example, the actual playing time of a football game, where play is repeatedly interrupted): A Small chronograph seconds hand 2 C 4 Repeat steps 2 and 3 until event is ended 5 Push button b to reset to zero B Date display L To synchronize Chronograph Hands: After a battery change or in the event of an error, you may need to manually adjust the chronograph small seconds hand to align it correctly at the zero position, using push buttons a and b: Seconds hand Crown Positions: Position 1 - Normal position Crown pushed against case Position 2 - To set DATE*: Rotate crown clockwise Position 3 - To set TIME: Rotate crown in either direction 2 Crown 1 B S Legend Legend 2 Use button a to move chronograph small seconds hand counterclockwise or button b to advance it clockwise Each push and release will move hand by one second Press and hold button a or b to move hand rapidly in desired direction H - Hour hand M - Minute hand S - Small seconds hand (subdial at 2:30) H - Hour hand M - Minute hand S - Small seconds hand C - Chronograph seconds hand (center mounted) E - Chronograph minutes counter (subdial at 9:30) G - Chronograph tenths-of-a-second counter (subdial at 6) D - Day of week window J - Month window F - Date indicator hand C - Chronograph seconds hand E - Chronograph minutes counter G - Chronograph tenths-of-a-second counter D - Day of week window 1, 2 - Crown positions To operate the Chronograph: NOTE: Use Buttons a and b to operate the stopwatch timer W - Day of week corrector (at 10 o’clock) K - Month corrector (at 2 o’clock) L - Date corrector (at 8 o’clock) D B A - Chronograph push-button (start/stop) B - Chronograph push-button (reset) 1, 2 - Crown positions A - Chronograph push-button (start/stop) B - Chronograph push-button (reset) 2 S G F C This chronograph can be used to time events up to 59 minutes/59 seconds in duration, in whole second increments IMPORTANT: Crown must be in position 1, and chronograph hands must be at 60 (zero) before stopwatch is started Do not use chronograph while crown is pulled to position 2 or 3 If necessary, press button b to reset chrono hands to zero before you start timing M H E Crown 1 A G 1 Pull crown out to position 3 3 Once hand is properly aligned, push crown back in to position 1 *NOTE: If the Date is set between 9:00 PM and 3:00 AM, the date may not change on the following day A M H E 3 Press button a again when the event resumes 3 J K W 2 Push button a to stop the timing when the event is halted Crown 1 D 1 Push button a to start the stopwatch when the event begins 24-Hour display Chronograph minute hand OPERATING INSTRUCTIONS Analog Chronographs 1/10 of a Second 4. Take an accurate time signal (from a radio news station, for example). The instant the audible tone signals exact time, push crown back in to position 1. Watch will restart, now set to the exact time. Using Quick Date Change Feature: Push date corrector button L located on side of case at 8 o’clock to advance date rapidly – at the end of a month with fewer than 31 days, for example. OVERVIEW This chronograph features a precise quartz chronograph movement with minute counter (up to 30), tenths-of-a-second counter (after 30 minutes, functions as an hour counter) and small seconds subdials; center-mounted chronograph seconds hand; and sophisticated calendar function with day and month display windows and center-mounted date indicator hand. It can be used to time an event up to 30 minutes in duration to the nearest 1/10 of a second, or up to 10 hours in duration to the nearest second. simple chronograph functions: To measure the duration of a single, non-stop event: 1 Press button a to start chronograph 2 Press button a a second time to stop chronograph 3 Press button b to reset chronograph to zero Each press and release of corrector button L will advance the date by one day. NOTE: If you use quick date change between 9:00 PM and 00:20 AM, set date to the following day; date will not automatically advance at midnight if corrector L is used between these hours. Setting the Time, Date, Day of week and Month: 1. Pull crown out to position 2. Watch will stop. TIME/DATE SETTING 2. Turn crown in either direction to move hands to correct time, making sure date changes at midnight, not noon. (To set time to exact second, see “Setting the time”.) Setting the time: 1. As soon as small seconds hand S reaches 60-second position, pull crown out to position 2. Watch will stop. 3. Push crown back in to position 1. Watch will restart. 2. Turn crown in either direction to move hands to correct time, making sure date changes at midnight, not noon. NOTE: Each press and release on corrector buttons will advance setting by one increment: 3. Move hands slightly ahead of exact time, then slowly turn crown counterclockwise to align minute hand M with correct minute marker. 16 4. Use corrector button L (on side of case at 8 o’clock) to advance date indicator hand F. 17 6. Press button A to stop chronograph. 5. Use corrector button W (on side of case at 10 o’clock) to advance day of week shown in day window D. oPeRaTInG InsTRUCTIons 7. Take a reading of the final time, for example: 27 minutes, 3 seconds, 4/10 seconds. 6. Use corrector button K (on side of case at 2 o’clock) to advance month shown in month window J. analog Chronographs 1/20 of a second 8. Press button B to reset chronograph hands to zero. Chronograph Functions To Synchronize Chronograph Hands: After a battery change or in the event of an error, you may need to manually adjust one or more chronograph hand to align them all correctly at their zero positions. Use buttons A and B to operate the chronograph. Pressing button A the first time will start the chronograph. While the chronograph is running, once the chronograph seconds counter hand C has completed one turn, minute-counter hand E will jump ahead one minute. Tenths-of-a-second hand G does not move when the chronograph is running. Pressing button A a second time will stop the chronograph and move hand G to the relevant tenth-of-a-second mark. Pressing button B will reset hands G, E and C to zero. Adjusting the time does not stop the chronograph, but it does block buttons A and B for as long as the crown is pulled out. NOTES: Once in corrective mode, each press and release on push-button A will advance active chronograph hand by one increment. To advance hand rapidly, depress and hold push-button A. You may exit correction mode at any time in the sequence by returning crown to position 1. 1. Pull crown out to position 2. To Operate the Chronograph: . IMPORTANT: Crown must be in position 1 and hands must be at zero before chronograph is started. If necessary, press push-button B to reset hands to zero. If push-button A or B is accidentally pressed with crown in position 2, one or more of the chronograph hands may become de-synchronized. Should this occur, see directions for synchronizing hands at end of following instructions. split-time functions: 1/20 second chronograph hand 3. Adjust center-mounted chronograph seconds hand C using push-button A. Simple chronograph functions: To measure the duration of a single, non-stop event: 4. When hand C reaches zero position, press push-button B. 5. Now press push-button A to adjust tenths-of-a-second counter hand G. 6. When hand G reaches zero position, press push-button B. 1. Press button A to start chronograph. 2. Press button A a second time to stop chronograph, and read the 3 chronograph hands to determine elapsed time, for example: 4 minutes, 37 seconds, 5/10 of a second. 7. Use push-button A again to adjust minute counter hand E. 8. When hand E reaches zero position, push crown back in to position 1. 3. Press button B to reset chronograph hands to zero. Accumulated time functions: To measure the combined time of a series of shorter events, for example the actual playing time of a football game, where play is repeatedly interrupted: Timing hands are now synchronized at zero position, and chronograph is ready for use. 3 Read off the intermediate time 4 Press button b to resume chronograph function Hands will fly back, catching up with ongoing event Crown Small seconds hand Chronograph seconds hand 2 Press button b to momentarily stop chronograph Start/stop Hour hand 2. Press and hold push-buttons A and B simultaneously for at least 2 seconds to enter corrective mode. When chronograph sec onds hand C rotates 360o, corrective mode is activated; release buttons A and B. To take intermediate time readings as a race progresses: 1 Press button a to start chronograph Minute hand Split/reset Date display 24-Hour hand 5 To read a second split time, press button b again Repeat steps 2 through 4 to take any additional split times 6 Press button a to stop chronograph 7 Take a reading of the final time 8 Press button b to reset chronograph to zero NOTE: 1/20th Second chrono hand will stop running at 10 minutes, while the inside mechanism continues to calculate To set the Date and Time: Crown positions: To synchronize Chronograph Hands: Position 1 - Normal position Crown pushed against case After a battery change or in the event of an error, you may need to manually adjust the chrono 1/20th of a second, second, minute and hour hands to align them correctly at their zero positions Position 2 - To set DATE*: Rotate crown counterclockwise NOTE: It is important to follow steps in this sequence: 1 Pull crown out to position 3 Position 3 - To set TIME: Rotate crown in either direction 2 Press and hold button b for 2 seconds and release *NOTE: If the Date is set between 9:00 PM and 3:00 AM, the date may not change on the following day 3 Turn crown to move chrono 1/20th of a second hand to its zero position To operate the Chronograph: 4 Again press and hold button b for 2 seconds and release The chronograph function on this model can be used to time an event up to 12 hours in duration to the nearest 05 seconds Use Buttons a and b to operate the stopwatch timer 1. Press button A to start chronograph. 2. Press button A a second time to stop chronograph. NOTE: Each time you stop chronograph, chronograph hands will indicate total accumulated time. IMPORTANT: Crown must be in position 1, and chronograph hands must be at 60 (zero) before stopwatch is started Do not use chronograph while crown is pulled to position 2 or 3 If necessary, press button b to reset chrono hands to zero before you start timing 5. Repeat steps 1 and 2 to add each additional interval of time simple chronograph functions: 6. After you have taken your final accumulated time reading, press button B to reset chronograph hands to zero. To measure the duration of a single, non-stop event: 1 Press button a to start chronograph Split-time or intermediate-time functions: To take intermediate time readings as a race progresses: 3 Press button b to reset chronograph to zero 3. Press button A again to resume measurement. 4. Press button A a fourth time to stop chronograph again. 5 Turn crown to move chrono seconds hand to its zero position 6 Press and hold button b a third time for 2 seconds and release 7 Turn crown to move chrono minute and hour hands to their zero positions 8 If necessary, press and hold button b for 2 seconds and release to return mechanism to 1/20th of a second hand adjustment 9 When finished with chrono hand adjustment, push crown back in to position 1 2 Press button a a second time to stop chronograph 1. Press button A to start chronograph. 2. Press button B to momentarily stop chronograph. 3. Read off the intermediate time, for example: 10 minutes, 26 seconds, 3/10 of a second. 4. Press button B to resume chronograph function. Hands will quickly catch up with ongoing event. 5. To read a second split time, press button B again. Repeat steps 2 through 4 to take any additional split times. 18 19 oPeRaTInG InsTRUCTIons oPeRaTInG InsTRUCTIons Regatta Chronograph Removable links Removable links Alarm hand Hour/seconds counter To display: • count down seconds • race timing REGULAR hours BRACELET LINK Seconds hand BAR CLASP LINK REGULAR BRACELET LINK BAR CLASP LINK Push button A IN UTE YA C I2 TIPS: We recommend that you adjust one side of the bracelet at a 20 6 IN 15 H 50 24 3 45 30 8 0 25 . 6 MIN 7 . Push button B 3 Repeat steps 1 and 2 further along length of bracelet, to remove the desired number of links Central hand To reattach Tolinks: display: 1 Line up the two lengths of bracelet you wish to reconnect side • count down minutes Use an open bar clasp link to rejoin them: Once the bar link is in proper• race position, timing squeeze it together between your fingers until you feel it snap closed, locking the bracelet sections back minutes Minute hand by side, face up 2 To remove links: 1 Hold one side of watch bracelet as shown, with a regular link grasped between the thumb and index finger of each hand, and one bar clasp link between them 2 WATER RESISTANT 5 clasp link open To ensure that the watch will sit properly on the wrist, it is best to remove/add an equal number of links on each side If you must remove an odd number, take the extra link from the 6 o’clock side . 40 together Repeat process above to remove and reattach links on other side of bracelet Important: The measurement of time starts by the count down, then followed by the race timing. 20 Certain bracelet watches feature bar-shaped connecting links that function like jewelry clasps, allowing you to achieve a quick, custom fit TIPS: We recommend that you adjust one side of the bracelet at a time MIN 6 10 8 4 2 0 60 50 To remove links: 1 Hold one side of watch bracelet as shown, with a regular link grasped between the thumb and index finger of each hand, and 3 10 ATM 5 one bar clasp link between them 35 M IM 10 60 • alarm Gently twistON/OFF your hands in opposite directions to “pop” the bar • START/STOP T 1 RS 0 To ensure that the watch will sit properly on the wrist, it is best to 40 20 remove/add an equal number of links on each side If you 1must 8 remove an odd number, take the extra link from the 6 o’clock side12 Push button C G R OU IN 05 5 time HT 8 M 1 E Certain bracelet watches feature bar-shaped connecting links that function like jewelry clasps, allowing you to achieve a quick, custom fit 5 • Reset • Count down timer setting • Second chance count down adjustment • Select the display of hours/seconds counted at the 10H counter 2 Gently twist your hands in opposite directions to “pop” the bar clasp link open 3 Repeat steps 1 and 2 further along length of bracelet, to remove the desired number of links To reattach links: 1 Line up the two lengths of bracelet you wish to reconnect side by side, face up 2 Use an open bar clasp link to rejoin them: Once the bar link is in proper position, squeeze it together between your fingers until you feel it snap closed, locking the bracelet sections back together Repeat process above to remove and reattach links on other side of bracelet 20 21 oPeRaTInG InsTRUCTIons oPeRaTInG InsTRUCTIons Interchangeable bracelet/strap Models Hook and bar style Interchangeable bracelet/strap Models Tension-pin style Removing Strap REPLACING STRAP (b) REMOVING STRAP (a) 1a Replacing Strap 1 2 5 6 3 4 7 8 1b 2a 2b 3a 3b 21 22 23 22 oPeRaTInG InsTRUCTIons oPeRaTInG InsTRUCTIons Convertible bracelet/strap Models BossRemovable Black Racing Watch links Converting Bracelet to Strap STOPWATCH Minute hand Minute hand 60 5 55 60 50 45 MIN 15 24-hour hand 10 Hour hand 30 18 SEC BAR CLASP LINK REGULAR SmallBRACELET second hand LINK 6 Crown N: Normal 1: First click position 2: Second click position 12 30 12 40 ALARM 3 9 20 2 24 15 45 60 6 35 STOPWATCH Certain bracelet watches feature bar-shaped connecting links 30 1/5-second hand that function like jewelry clasps, allowing you to achieve a quick, 25 Date custom fit ALARM Minute hand ALARM TIPS: We recommend that you adjust one side of the bracelet at a Hour hand time How to Set Time and Date: To ensure that the watch will sit properly on the wrist, it is best to remove/add an equal number of links on each side If you must remove an odd extra link from 1 the 6 o’clock side How to Setnumber, Time take andtheDate: How How to SettoTime Set Time and Date: and Date: To remove links: 1 Hold one side of watch bracelet as shown, with a regular link 1 1 2 grasped between the thumb and index finger of each hand, and one bar clasp link between them 2 60 60 5 50 15 60 45 50 20 45 50 50 45 SEC 45 12 ALARM 18 3 9 6 24 6 35 25 30 12 12 ALARM 12 3 9 6 35 25 6 12 30 15 ALARM 3 9 20 9 20 3 6 2535 MIN 30 40 ALARM 40 40 40 9 20 12 3 6 45 24 60 18 6 SEC 12 30 15 Pull out30 30 12 12 ALARM 15 30 18 SEC 60 MIN 3 Repeat steps 1 and 2 further along length of bracelet, to remove 1st. position the desired number of links 35 5 60 45 60 15 6 15 45 9 25 24 40 40 18 15 30 3 6 35 5 55 55 12 ALARM 24 20 6 12 30 15 10 10 SEC MIN 30 24 60 18 6 SEC 12 30 10 45 10 15 30 45 45 18 SEC 60 MIN 15 60 60 15 5 60 45 60 60 15 5 55 55 2 Gently twist your hands in opposite directions to “pop” the bar clasp link open MIN 30 24 50 60 60 10 MIN 10 45 30 60 5 55 2 60 20 55 50 4 3 6 2535 25 crown out to the 1st click position. Turn the crown clockwise until the previou Pull out Pull Pull out To reattach links: position side date appears. 1 Line up the two lengths of bracelet1st. youposition wish1st. to reconnect Note: Do not set the date between 9:00 PM and 1:00 AM. by side, face up Pull crown Pullout crown to the out 1st toclick the 1st position. click position. Turn the Turn crown theclockwise crown clockwise until the until previous previous day’s day’s Otherwise, the the date may not change properly. 30 30 30 2 Use an open bar clasp link to rejoin them: Once the bar link is in proper position, squeeze it together between your fingers until you feel it snap closed, locking the bracelet sections back 3 together 30 date appears. date appears. Note: Do notNote: set the Dodate not set between the date 9:00 between PM and9:00 1:00PM AM. and 1:00 AM. Otherwise, the Otherwise, date may the not date change may not properly. change properly. 60 Repeat process above to remove and reattach links on other side 3 3 of bracelet 5 55 60 50 MIN 15 10 45 30 5 10 50 45 45 30 15 ALARM 3 9 6 20 20 40 40 9 2535 35 9 25 30 12 3 6 3 6 6 12 12 ALARM 35 ALARM 24 18 6 12 40 30 24 60 6 SEC 12 30 12 30 15 30 18 15 SEC MIN 10 15 30 18 SEC 60 MIN 20 60 45 60 24 15 5 55 55 50 60 60 45 60 45 1 Pull out 2nd. position 25 30 crown out to the 2nd click position when Pull out Pull Pull out 2nd. position 2nd.second position hand is at the 12 o'clock position. the Note: When the stopwatch has been measuring or is stopped, if the Pull crown Pullout crown to the out 2nd to click thecrown 2nd position click when when is pulledposition out to the 2nd. click position, it will automatically Stopwatch hands to “0”. the second the hand second is at hand the is 12atreset o'clock thethe12 position. o'clock position. 23 24 Note: WhenNote: the stopwatch When thehas stopwatch been measuring has been or measuring is stopped, or if isthe stopped, if the crown is pulled crown outistopulled the 2nd. out click to the position, 2nd. click it will position, automatically it will automatically reset the Stopwatch reset the hands Stopwatch to “0”. hands to “0”. 25 20 oPeRaTInG InsTRUCTIons oPeRaTInG InsTRUCTIons BossRemovable Black Racing Watch links BossRemovable Black Racing Watch links 1 2 50 20 45 45 45 ALARM 6 3 9 6 35 12 3 The stopwatch can measure up to 59’59”80 in 1/5 second increments. After 60 minutes, it will start counting again from “0” repeatedly to 12 hours. When the measurement reaches 12 hours, the stopwatch automatically stops counting. 25 30 9 20 50 45 20 20 50 50 45 18 ALARM 6 35 25 Pull out Pull out Pull crown 1st. position 1st. position 30 12 12 9 ALARM 6 12 30 24 6 SEC 1230 30 24 18 SEC 15 2535 30 2460 18 15 45 60 SEC Pull out 12 3 6 1st. position 6 35 15 15 9 25 30 9 40 6 3 3 6 35 12 ALARM MIN 30 40 40 40 9 45 10 ALARM 6 15 15 18 12 3 60 15 30 15 40 24 6 SEC 1230 12 ALARM MIN MIN 60 5 60 45 10 2460 18 30 45 30 60 5 55 55 6 12 12 40 60 SEC 24 18 SEC 30 30 10 15 15 MIN 10 45 30 60 60 60 5 60 15 10 MIN How to Use Stopwatch Functions: 5 55 30 60 5 55 60 45 15 10 60 55 MIN 2 50 60 45 60 2 5 55 50 1 20 60 1 20 How to Set Alarm: 2535 25 30 30 out to the 1st click position. Press button “B” repeatedly to set the Alarm hands to the desired alarm time. Note: Alarm quickly button “B” is kept pressed. Pull crown out to the 1st click position. Press button “B” repeatedly toThe set the Alarm Pull crown out to the 1st click position. Press button “B” repeatedly tohands setmove thehands Alarmif hands BAR CLASP REGULAR to the desired alarm time. to the desired alarm time. LINK BRACELET LINK 3 Note: The Alarm movehands quickly if button “B” is kept “B” pressed. Note: hands The Alarm move quickly if button is kept pressed. STOPWATCH Minute dial REGULAR BRACELET LINK BAR CLASP LINK STOPWATCH Minute hand 60 5 55 60 60 links Certain bracelet watches feature bar-shaped connecting 24 18 that function like jewelry clasps, allowing you to achieve a quick, 12 30 12 custom fit 3 45 24 18 6 12 30 12 30 ALARM 18 ALARM 6 25 40 9 3 9 ALARM 6 20 20 40 To ensure that the watch will sit properly on the wrist, it is best to remove/add an equal number of linksPush on each side back If you must backPush remove an odd number, take the extra link from the 6crown o’clockback side to normal position. Push Normal position Normal position ALARM 6 35 2535 To ensure that the watch will sit properly on the wrist, it is best to remove/add an equal number of links on each side If you must STOPWATCH remove an odd number, take the extra link from the 6 o’clock side 25 30 30 1/5-second hand Note: The alarm is automatically engaged. To remove links: crown back to position. Push crown back towith normal position. 1 Hold one Push side of watch bracelet asnormal shown, a regular link Note: The alarm automatically engaged. engaged. Note:isThe alarm is automatically grasped between the thumb and index finger of each hand, and 1 How toclasp Cancel the Alarm one bar link between them Time You Have Set: 9 30 Pull out 12 3 6 1st. position 20 20 3 35 25 Pull out 45 45 45 15 SEC 12 ALARM 6 ALARM 3 3 9 6 35 12 25 30 12 9 12 30 24 18 1230 ALARM 6 2535 MIN 30 6 40 ALARM 40 40 40 9 45 25 30 12 3 6 45 2460 18 15 35 12 12 ALARM 15 30 15 15 1230 30 35 MIN 60 SEC 6 20 9 18 SEC 9 20 3 6 2 Gently twist your hands in opposite directions to “pop” the bar clasp link open 24 40 ALARM 6 45 12 40 18 SEC 15 30 60 50 12 30 24 6 15 18 50 45 15 30 20 50 50 MIN To reattach links: 1 Line up the two lengths of bracelet you wish to reconnect side by side, face up SEC 60 MIN 15 45 2460 6 45 60 5 10 15 30 60 18 SEC 10 MIN 10 45 60 15 60 60 60 5 55 55 10 3 Repeat steps 1 and 2 further along length of bracelet, to remove the desired number of links 5 55 60 24 45 60 5 20 50 15 30 60 5 55 55 10 MIN 10 45 2 50 60 60 60 2 5 55 To remove links: 1 Hold one side of watch bracelet as shown, with a regular link grasped between the thumb and index finger of each hand, and one bar clasp link between them 2 60 2 Gently twist in opposite directions to “pop” the bar 1 your hands 1 clasp link open 6 9 6 TIPS: We recommend that you adjust one side of the bracelet at a 35 25 30 time Push back Normal position 30 12 3 9 35 12 12 3 6 15 45 24 6 SEC 1230 30 20 2460 18 15 45 60 40 TIPS: We recommend that you adjust one side of the bracelet at a time SEC SEC 20 50 50 15 SEC 40 15 15 MIN 10 10 45 MIN 60 5 60 15 30 45 50 45 30 60 5 55 MIN 10 60 60 45 15 15 Certain bracelet watches feature bar-shaped connecting links that function like jewelry clasps, allowing you to achieve a quick, custom fit MIN 30 60 55 45 50 3 5 10 3 60 55 6 2535 25 3 Repeat steps 1 and 2 further along length of bracelet, to remove the desired number of links To reattach links: 1 Line up the two lengths of bracelet you wish to reconnect side by side, face up Pull out 2 Use an open bar clasp link to rejoin them: Pull Once the bar link is to the 1st click position. crown out Press and hold button “B” until Alarm hands 2 Use an open bar clasp link to rejoin them: Once the bar link is 1st. position 1st. position in proper position, squeeze it together between your fingers in proper position, squeeze it together between your fingers stop and indicate the current time. Note: The Alarm hands move quickly if button “B” is kept pressed. until you Pull feel it snap closed, locking the bracelet sections back until you feel it snap closed, locking the bracelet sections back crown out to the 1st click position. Press and hold button until Alarm hands Pull crown out to the 1st click position. Press and hold “B” button “B” until Alarm hands together together stop and indicate the current time. time. stop and indicate the current 30 30 30 3 Repeat process above to remove and reattach links on other side of bracelet 50 45 50 45 15 18 SEC 1230 30 ALARM 3 9 25 20 20 40 40 9 9 30 12 3 6 6 2535 30 3 6 35 12 12 ALARM 6 12 ALARM 6 15 15 45 24 6 24 12 40 2460 18 30 30 18 SEC 15 MIN 10 10 45 60 35 60 5 60 15 30 15 30 60 5 55 MIN MIN 10 60 45 50 Repeat process above to remove and reattach links on other side of bracelet 60 60 45 5 55 55 SEC Note: The Alarm movehands quickly if button “B” is kept “B” pressed. Note: hands The Alarm move quickly if button is kept pressed. 60 3 20 3 30 Push back Normal position 25 30 Push backPush back Normal Push position Normalcrown positionback to normal position. Note: The alarm is automatically engaged. Push Push crown back to back normal position. crown to normal position. Note: The alarm automatically engaged. engaged. Note:isThe alarm is automatically 26 20 27 20 WaRRanTy & seRvICe InfoRMaTIon Please see the printed warranty and service guide enclosed with your watch for complete warranty and service information – or return to our service website home page and click on the Warranty and Service Information link CaRe anD MaInTenanCe Your watch has been developed with meticulous attention to quality, function and detail Please read the following information and instructions carefully to learn about the features, proper care and operation of your new timepiece For additional information on service and repairs, please see your Warranty & Service Guide booklet – or return to our service website home page and click on the Warranty and Service Information link shock All our watches have shock-resistant movements and are tested to meet international standards for shock resistance Magnetism The exposure of a timepiece to a strong magnetic field will affect its time-keeping, and may cause it to stop A quartz watch should resume working with its original accuracy when removed from the magnetic field; an automatic or hand-wound mechanical timepiece, however, may require demagnetization before it will operate again Water Resistance All our watches meet international standards for water resistance to at least 3ATM / 30M / 99 feet, so faucet spray or rain won’t hurt them as long as the case, crown and crystal remain intact Timepieces marked water resistant to 50M / 5 ATM / 165 feet may be worn while showering or swimming, but not scuba diving CAUTION: Do not press the push-buttons on a chronograph model when the watch is under water, or it will not remain water resistant NOTES: We recommend that you do not get your leather strap wet Exposing leather to water can cause premature wear and deterioration Carefully wipe your watch using a soft cloth dampened with fresh water after exposure to chlorine or sea water battery Information Your quartz analog watch or chronograph has a battery specially designed for watches It will last approximately 18-36 months under normal use NOTE: Frequent use of special functions, like the stopwatch timer on chronograph models, may shorten battery life End-of-life feature: The seconds hand on many models will start to move haltingly in 4-second increments when the battery is almost exhausted, signaling the need to have it replaced Battery replacement: Take or send your watch to an Authorized Service Center to have battery changed – your old battery will be disposed of/recycled properly Do not attempt to change the battery yourself Warranty and service Information Please see the printed warranty and service guide enclosed with your watch for complete warranty and service information – or return to our service website home page and click on the Warranty and Service Information link 28 24 25 29 WATCH CARE AND MAINTENANCE, OPERATING INSTRUCTIONS WARRANTY AND SERVICE GUIDE oPeRaTInG InsTRUCTIons oPeRaTInG InsTRUCTIons 2- and 3-Hand Models Digital models Models Convertible bracelet/strap Converting Bracelet to Strap Crown 1 2 Seconds Hand B - MODE Seconds hand 2 Crown Positions: Position 1 - Normal position Crown pushed against case Date Display A - SET Position 2 - To set TIME: Rotate crown in either direction Time setting Pull crown to position 2. To set time rotate crown in either direction. Date setting Pull crown to position 1. To set date rotate crown in either direction. 1 Time setting Press A key twice to entry Time Setting mode ,select item in turn as 4 3 following: Month / Day / Hour / Minute Press B key to adjust the flashing item. Press A key to confirm. 448 11-3-04 11-3-04 32 1 33 23 oPeRaTInG InsTRUCTIons Multi-eye Models oPeRaTInG InsTRUCTIons oPeRaTInG InsTRUCTIons Multi-eye Models Digital models Models Convertible bracelet/strap Converting Bracelet to Strap Day hand Day hand Crown Date hand Date hand Second hand 1 2 3 24-Hour time hand Second hand Multi-eye watches are powered by multi-function movements that enable them to report such information as month, weekday and date via apertures or “eyes” in the dial Date counter Light /Reset (A Key) Crown Day counter 1 2 3 24-Hour time hand 2 Mode (B Key) 24 hours counter Time setting Multi-eye watches are powered by multi-function movements that enable them to report such information as month, weekday and date via apertures or “eyes” in the dial (D Key) Start/stop (C Key) Set Time setting 1 Alarm and Chime ON/OFF: 4 At Alarm original state, press A key to be ON/OFF ). Alarm ( ) and Chime ( When Alarm Time over, alert sounding and indicator ( ) flashing for about 20s. 1. Real Time 3 At any mode, press A key to EL back bright. Time setting: Press C key to enter Time Setting state Press B key to select «Hour», «Minute», «Year», «Month», «Day» setting Press D key to adjust the flashing item and press C key to return to Real Time mode Dual Time setting: At Time Setting state, press A key to select 12/24H format. 3. Timer Timer time setting: Press C key to enter Timer Time Setting state: Press A key to be ON/OFF Press B key to select «Hour», «Minute» and «Second» setting Press D key to adjust the flashing item and press C key to return to Timer mode Operate: Press D key to Start/Stop counting: Press C key to reset when counting Stop; There is 10s alert soundings when finish counting. 2. Schedual Alarm Alarm Time setting: Press C key to enter Alarm Setting state «Hour» flashing at this time and Alarm be ON automatically Press B key to select «Hour», «Minute», «Year», «Month», «Day» setting Press D key to adjust the flashing item and press C key to return to Alarm mode Project #: 925 Designer: 34 5 Tatiana G Creation: 10.26.07 Modification: 4.28.08 4. Chronograph Press D key to Start/Stop counting: When stop, press A key to zero; When counting, press B key to Real Time mode, and Stopwatch running at back. 35 23 oPeRaTInG InsTRUCTIons Ana-digi models Models Convertible bracelet/strap Converting Bracelet to Strap Light /Reset (A Key) (D Key) Start/stop Mode (B Key) (C Key) Set 2 B Key –> Real Time 1 B Key –> Chronograph B Key –> Alarm Time setting 4 3 Time setting 1. At any state, press A key EL backlight for 3s. Alarm Snooze ON/OFF At Alarm sounding state, press Ckey or D key to stop sounding, and press B key to ON/OFF snooze function. When Snooze function be ON, it will sound five minutes later, and auto stop after sounding for 20 Second. 2. Chronograph Press D key to Start/Stop running; When stop, press C key to zero. When running, press C key to split count. indicator «SP» showing Then press DD key to exit split count ,and stop counting; press CC key again to zero; When running, press BB key to return to Real Time Mode, and it running at back. 4. Time Setting «Second» flashing when loading, press D key to zero; Press C key to select item as following sequence: Hour –> Minute –> Month –> Day –> Day of Week –> Second When setting «Hour», «H» display for 24 H format; «A» or «P» for 12 H format. Press D key while the seconds are in the range of 30 to 59 resets them to 00 and adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged. 3. Daily Alarm Turn On / Off Alarm and Chime Press D key to turn on/off Alarm ( ) or Chime ( ). Alarm setting: Press C key to select «Hour» or «Minute» setting, Press D key to adjust the flashing item, Press C key to confirm, Press B key to return to Real Time mode. ➢ 36 23
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Author : Provided By MANUALSLIB.COM - http://www.manualslib.com/ Create Date : 2012:06:17 11:18:00Z Keywords : manuals, instruction manuals, user manuals, service manuals, user guides, pdf manuals, owners manuals, installation guides Modify Date : 2014:12:07 15:13:44+08:00 Subject : Search through 700.000 manuals online & and download pdf manuals. Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : Provided By MANUALSLIB.COM - http://www.manualslib.com/ Description : Search through 700.000 manuals online & and download pdf manuals. Title : ManualsLib - Makes it easy to find manuals online! Creator Tool : pdftk 1.44 - www.pdftk.com Metadata Date : 2014:12:07 15:13:44+08:00 Producer : itext-paulo-155 (itextpdf.sf.net-lowagie.com) Document ID : uuid:1589f1f2-5f77-5542-9861-886ac4573a75 Instance ID : uuid:2ec7dec2-1856-d243-ad95-7eafbab26316 Page Count : 20EXIF Metadata provided by EXIF.tools