Hugo Boss 1512323 Users Manual ManualsLib Makes It Easy To Find Manuals Online!

2014-12-11

: Hugo-Boss Hugo-Boss-1512323-Users-Manual-120243 hugo-boss-1512323-users-manual-120243 hugo-boss pdf

Open the PDF directly: View PDF .
Page Count: 20

WATCH CARE AND MAINTENANCE, OPERATING INSTRUCTIONS

WARRANTY AND SERVICE GUIDE

TABLE OF CONTENTS

2- and 3-Hand Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Date/Big Date Display Models - Type A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Date/Big Date Display Models - Type B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Automatic Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Multi-Eye Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Multi-Eye Models with Retrograde Day/Date. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Multi-Eye Models with Date/24-Hour Hand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Multi-Eye Models with Day/Date/24-Hour Hand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Multi-Eye Models with Month/Day/24-Hour Hand/Date . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Dual-Time Retrograde Models with Big Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Dual-Time GMT Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Chronographs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Analog Chronographs 1/1 of a Second – Type A

with center-mounted chronograph seconds hand and chronograph minutes counter . . . . . . . . . . . . . . . . . . 13

Analog Chronographs 1/1 of a Second – Type B

with center-mounted chronograph seconds hand, chronograph hour

and minutes counters and small seconds subdial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Analog Chronographs 1/1 of a Second - Type C

with small chronograph seconds and 24-hour hands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Analog Chronographs 1/1 of a Second - Type D

with small chronograph seconds and 24-hour hands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Analog Chronographs 1/10 of a Second . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Analog Chronographs 1/20 of a Second . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Removable Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Interchangeable Bracelet/Strap Models

Tension-pin style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Interchangeable Bracelet/Strap Models

Hook and bar style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Convertible Bracelet/Strap Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Regatta Chronograph . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Boss Black Racing Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Warranty & Service Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

BOSS ORANGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-31

OPERATING INSTRUCTIONS

Crown Positions:

Position 1 - Normal position.

Crown pushed against case.

Position 2 - To set TIME:

Rotate crown in either direction.

2- and 3-Hand Models

448

11-3-04

1 2

Crown

Seconds hand

OPERATING INSTRUCTIONS

Crown Positions:

Position 1 - Normal position.

Crown pushed against case.

Position 2 - To set DATE*:

Rotate crown clockwise.

NOTE: For models with DAY/DATE display(s):

Rotate crown clockwise to set DATE,

And counterclockwise to set DAY.

Position 3 - To set TIME:

Rotate crown in either direction.

*CAUTION: Never set the date when the hands are between

9:00 PM and 3:00 AM. Doing so could damage the calendar

mechanism.

NOTE: The functioning of the watch is not affected during date

setting. When the watch is running, the date will change gradually

during the period from 9:00 PM to 3:00 AM.

Date/Big Date Display Models - Type A

12 3

Crown

Date display

OPERATING INSTRUCTIONS

Crown Positions:

Position 1 - Normal position.

Crown pushed against case.

Position 2 - To set DATE/BIG DATE*:

Rotate crown clockwise.

NOTE: For models with DAY/DATE display(s):

Rotate crown clockwise to set DATE,

And counterclockwise to set DAY.

Position 3 - To set TIME:

Rotate crown in either direction.

Big Date models feature an oversized date window with two single-

digit disks that rotate independently of one another.

*NOTE: If the Date/Big Date is set between 9:00 PM and 3:00 AM,

the date may not change on the following day.

NOTE: The functioning of the watch is not affected during date

setting. When the watch is running, the date will change gradually

during the period from 9:00 PM to 3:00 AM.

Date/Big Date Display Models - Type B

45 123

Big Date display

Small seconds hand

Crown

OPERATING INSTRUCTIONS

The motion of your arm during normal daily activities should be

sufficient to keep your automatic watch wound. However, if you

have not worn your watch for several days and it has stopped, you

will need to wind the movement by hand before setting the time.

To wind the Movement:

With the crown in position 1, flush against the case, turn the crown

clockwise, completing approximately 15 to 20 revolutions, then

gently but quickly move the watch back and forth several times to

start movement.

To set the Time:

Once the watch is running, pull the crown out to position 2 and turn

it in either direction to set hands to desired time, then push crown

back in to position 1.

Automatic Models

Tatiana G

Designer:

Project #:

Creation: Modification:

926 Auto 10/30/07 4/16/08

Minute

hand

Crown

Hour

hand

Seconds

hand

OPERATING INSTRUCTIONS

Multi-eye watches are powered by multi-function movements that

enable them to report such information as month, weekday and

date via apertures or “eyes” in the dial.

Multi-Eye Models

925

Tatiana G 10.26.07

Designer:

Project #:

Creation: Modification:

4.28.08

1 2 3

Day hand

Crown

24-Hour time

hand

Date hand

Second

hand

OPERATING INSTRUCTIONS

Multi-Eye Models with Retrograde Day/Date

Minute hand

Crown

Date display

Seconds

hand

Day hand

Hour hand

Crown Positions:

Position 1 - Normal position.

Crown pushed against case.

Position 2 - To set DATE*:

Rotate crown counterclockwise.

To set DAY: Rotate crown clockwise.

Position 3 - To set TIME:

Rotate crown in either direction.

*NOTE: If the Date is set between 9:00 PM and 1:00 AM, the date

may not change on the following day.

OPERATING INSTRUCTIONS

Multi-Eye Models with Date/24-Hour Hand

123

Minute hand

Crown

24-Hour hand

Seconds hand

Hour hand

Date hand

Crown Positions:

Position 1 - Normal position.

Crown pushed against case.

Position 2 - To set DATE*:

Rotate crown counterclockwise.

Position 3 - To set TIME:

Rotate crown in either direction.

*NOTE: If the Date is set between 9:00 PM and 3:00 AM, the date

may not change on the following day.

OPERATING INSTRUCTIONS

To set Day, Time and Date:

NOTE: It is important to follow steps in this sequence:

1. Pull crown out to position 3.

2. Turn crown clockwise until Day hand points to correct day.

NOTE: While watch is running, hand indicating day of week will

gradually and automatically advance between midnight and about

5:30 AM.

3. With crown still in position 3, continue turning crown clockwise

until 24-Hour hand indicates correct hour. (Ex: noon is hour “12”,

midnight is hour “24”, 9:00 AM is hour “9”, 9:00 PM is hour “21”,

etc.), and hour and minute hands point to accurate time.

4. Push crown in one click to position 2.

5. Turn crown counterclockwise until Date hand points to correct

date.

6. Push crown in to position 1, flush against case. Your watch is

now set to correct day, time and date.

Multi-Eye Models with Day/Date/24-Hour Hand

925

Tatiana G 10.26.07

Designer:

Project #:

Creation: Modification:

4.28.08

1 2 3

Day hand

Crown

24-Hour time

hand

Date hand

Second

hand

OPERATING INSTRUCTIONS

To set Hour, Minute and 24-Hour Time:

1. Pull crown out to position 3.

2. Turn crown clockwise to set Hour, Minute and 24-Hour hands to

desired time.

3. Push crown back in to position 1.

To set Second Time Zone:

1. With crown in position 1, press and release Push Button B to

set 24-Hour hand to desired time; hand will advance 1 hour with

each push.

To set Date:

1. Pull crown out to position 3.

2. Turn crown clockwise: Date hand will advance by 1 number

each time the hour and minute hands pass midnight (00:00).

3. When desired date is reached, push crown back in to position 1.

Quick Correction of Date:

1. Pull crown out to position 2.

2. Turn crown clockwise to advance Date hand step-by-step.

3. When desired date is reached, push crown back in to position 1.

CAUTION: To prevent possible damage to your watch mechanism,

do not use Quick Correction of Date feature between 9:00 PM

(21:00) and 12:30 AM (00:30) when automatic date changes are

already in progress.

Multi-Eye Models with Month/Day/24-Hour Hand/Date

123

500 11.29.05

05.20.05

Rome S

Designer:

Note:

Project #: Creation: Modification:

To set Day:

1. Pull crown out to position 3.

2. Turn crown clockwise: Day hand will advance by 1 day each

time the hour and minute hands pass 4:00 AM (04:00).

3. When desired day is reached, push crown back in to position 1.

To set Month:

1. With crown in position 1, press and release Push Button A to set

Month to desired one; Month hand will advance 1 month with

each push.

CAUTION: To prevent possible damage to your watch mechanism,

do not use Quick Correction of Month feature on 31st day of any

month when automatic month change is already in progress.

Minute

hand

Push button A -

Quick correction

of month

Crown

Date display

Push button B -

Quick correction

of second time

zone/24-hour hand

24-hour time hand

Second

hand

Day

hand

Hour

hand

Month

hand

OPERATING INSTRUCTIONS

Crown positions:

Position 1 - Normal position.

Crown pushed against case.

Position 2 - To set BIG DATE*:

Rotate crown clockwise.

To set DUAL-TIME/RETROGRADE 24-HOUR HAND:

Rotate crown counterclockwise.

Position 3 - To set TIME:

Rotate crown in either direction.

NOTE: The seconds hand will stop moving while hour and minute

hands are being set, allowing time to be set to the nearest second.

Dual-Time Retrograde Models with Big Date

Minute hand

Crown

Retrograde dual

time display

(24-hour hand)

Big Date

display

Hour hand

Seconds

hand

OPERATING INSTRUCTIONS

Your watch features a dual-time dial with 24-hour GMT hand that

allows you to monitor the time in a second time zone anywhere in

the world.

Reading the Watch:

In this illustration: The current time in the first time zone is

10:10’32” (10:10 PM) as indicated by the Hour and Minute hands

on the outer 12-hour ring. The current time in the second time

zone is 11:10’32” (11:10 AM) as indicated by the GMT hand on the

inner 24-hour ring.

NOTES: The Minute and Seconds hands are the same for both

time zones.

The Date is synchronized with the time in the first time zone.

ALWAYS set/adjust the 24-hour GMT hand (second time zone)

first, then set the time in the first time zone.

To set 24-Hour GMT Hand (second time zone):

1. When Seconds hand reaches 12 o’clock, pull crown out to

Position 3.

2. Rotate crown in either direction until 24-hour GMT hand and

Minute hand indicate desired time in second time zone.

3. When adjusting the Minute hand, move it approximately

10 minutes past the desired time, then move it back to the

desired position to ensure accurate time adjustment. This step

synchronizes the regular Hour (first time zone) hand.

4. Take an accurate time signal (from a radio news station, for

example). As soon as audible tone signals exact time, push

crown back in to position 1.

To set Time (first time zone):

1. Pull crown out to Position 2.

2. Rotate crown clockwise to set Hour hand to desired time: It will

advance in 30-minute leaps for quick adjustment.

3. Push crown back in to Position 1.

Dual-Time GMT Models

GMTGMT

123

NOTES: Setting the Hour hand on the exact hour provides the

most accurate time setting. If the Hour hand is set between hours,

it may prevent the time from being accurately displayed and read.

The Date is synchronized with this Hour hand; be sure to take

AM/PM time into account when adjusting it.

To set Date:

The Date is synchronized with the time in the first time zone.

1. Pull crown out to Position 2.

2. Rotate crown counterclockwise to adjust Date.

3. Push crown back in to Position 1.

NOTE: If the Date is set between 9:00 PM and 1:00 AM, the date

may not change on the following day.

Minute hand

Date display

Crown

GMT Hand

Seconds hand

Hour hand

OPERATING INSTRUCTIONS

A chronograph combines two time-keeping functions: In addition to

indicating the time on its dial, a chronograph can also be operated

like a stopwatch to measure intervals of time.

Chronographs

2 3

Chronograph

minute hand

Minute hand

Crown

Date display

Small seconds hand

Chronograph

seconds hand

Hour hand

OPERATING INSTRUCTIONS

Crown positions:

Position 1 - Normal position.

Crown pushed against case.

Position 2 - To set DATE*:

Rotate crown counterclockwise.

Position 3 - To set TIME:

Rotate crown in either direction.

*NOTE: If the Date is set between 9:00 PM and 3:00 AM, the date

may not change on the following day.

To Operate the Chronograph:

The chronograph function on these models can be used to time an

event up to 59 minutes/59 seconds in duration, in whole second

increments. Use Buttons A and B to operate the stopwatch timer.

IMPORTANT: Crown must be in position 1, and chronograph

hands must be at 60 (zero) before stopwatch is started. Do not use

chronograph while crown is pulled to position 2 or 3. If necessary,

press button B to reset chrono hands to zero before you start

timing.

Simple chronograph functions:

To measure the duration of a single, non-stop event:

1. Press button A to start chronograph.

2. Press button A a second time to stop chronograph.

3. Press button B to reset chronograph to zero.

To measure the combined time of a series of shorter events (for

example, the actual playing time of a football match, where play is

repeatedly interrupted):

1. Push button A to start the stopwatch when the event begins.

2. Push button A to stop the timing when the event is halted.

3. Press button A again when the event resumes.

Analog Chronographs 1/1 of a Second – Type A

with center-mounted chronograph seconds hand

and chronograph minutes counter

4. Repeat steps 2 and 3 until event is ended.

5. Push button B to reset to zero.

To Synchronize Chronograph Hands:

After a battery change or in the event of an error, you may need to

manually adjust the chronograph seconds hand to align it correctly

at the zero position:

1. Pull crown out to position 2.

2. Push button A to adjust chrono seconds hand: Each push on

button A will advance chrono hand by one second. Press and

hold button A to advance hand rapidly.

3. Once hand is properly aligned, push crown back in to position 1.

2 3

Chronograph

minute hand

Minute hand

Crown

Date display

Small seconds hand

Chronograph

seconds hand

Hour hand

123

5 ATM

Minute hand

Hour hand

Date display

Crown

24-Hour display

Chronograph

minute hand

Small

seconds

hand

Chronograph

seconds hand

OPERATING INSTRUCTIONS

Crown positions:

Position 1 - Normal position.

Crown pushed against case.

Position 2 - To set DATE*:

Rotate crown counterclockwise.

Position 3 - To set TIME:

Rotate crown in either direction.

*NOTE: If the Date is set between 9:00 PM and 3:00 AM, the date

may not change on the following day.

To Operate the Chronograph:

The chronograph function on these models can be used to time an

event up to 11 hours/59 minutes/59 seconds in duration, in whole

second increments. Use Buttons A and B to operate the stopwatch

timer.

IMPORTANT: Crown must be in position 1, and chronograph

hands must be at 60 (zero) before stopwatch is started. Do not use

chronograph while crown is pulled to position 2 or 3. If necessary,

press button B to reset chrono hands to zero before you start

timing.

Simple chronograph functions:

To measure the duration of a single, non-stop event:

1. Press button A to start chronograph.

2. Press button A a second time to stop chronograph.

3. Press button B to reset chronograph to zero.

To measure the combined time of a series of shorter events (for

example, the actual playing time of a football match, where play is

repeatedly interrupted):

1. Push button A to start the stopwatch when the event begins.

2. Push button A to stop the timing when the event is halted.

Analog Chronographs 1/1 of a Second – Type B

with center-mounted chronograph seconds hand,

chronograph hour and minutes counters

and small seconds subdial

1 2 3

3. Press button A again when the event resumes.

4. Repeat steps 2 and 3 until event is ended.

5. Push button B to reset to zero.

To Synchronize Chronograph Hands:

After a battery change or in the event of an error, you may need to

manually adjust the chronograph seconds hand to align it correctly

at the zero position:

1. Pull crown out to position 2.

2. Push button A to adjust chrono seconds hand: Each push on

button A will advance chrono hand by one second. Press and

hold button A to advance hand rapidly.

3. Once hand is properly aligned, push crown back in to position 1.

Chronograph

minute hand

Minute hand

Crown

Date display

Chronograph

seconds hand

Chronograph

hour hand

Hour hand

Small

seconds hand

OPERATING INSTRUCTIONS

Analog Chronographs 1/1 of a Second - Type C

with small chronograph seconds and 24-hour hands

1 2 3

Minute hand

Crown

24-Hour hand

(indicates time on

a 24-Hour basis)

Date display

Small

chronograph

seconds hand

Seconds

hand

Chronograph

minute

counter

Hour hand

This chronograph can be used to time events up to 59 minutes/59

seconds in duration, in whole second increments.

To set the Time and Date:

NOTES: Chronograph hands must be in the 12:00 (zero) position

before setting date and time.

Do not press push-buttons when crown is in position 2, or chrono-

graph hands will move.

Do not set date between 9:00 PM and 1:00 AM, or date may not

change properly. If it is necessary to change date during this time

period, first change time to any hours outside this period, set date,

then reset correct time.

1. Pull crown out to position 2.

2. Turn crown clockwise until previous day’s date appears.

3. As soon as seconds hand reaches the 12:00 position, pull crown

out to position 3. Watch will stop.

4. Turn crown to advance hour and minute hands past 12:00 to the

correct time, making sure the 24-hour hand is set correctly. Date

will change automatically.

5. Take an accurate time signal (from a radio news station, for

example). When audible tone signals the precise time, push

crown back in to position 1, flush against case. Watch will

restart, now set to the exact second.

To Operate the Chronograph:

NOTE: The chronograph function can be used to time an event up

to 60 minutes in duration, in whole second increments.

IMPORTANT: Crown must be in position 1, and chronograph

hands must be at 60 (zero) before stopwatch is started. Do not use

chronograph while crown is pulled to position 2 or 3. If necessary,

reset hands to zero following instructions below.

Use push-buttons A and B operate the stopwatch timer:

1. Press A to start the stopwatch.

2. Press A a second time to stop the stopwatch; read elapsed time

indicated by chrono minute and seconds hands.

3. Press B to reset all chronograph hands to zero.

To Adjust the Chronograph Hands:

1. Pull crown out to position 3.

2. Press and release push-buttons to reset chronograph minute

and small seconds hands to 60 (zero) position:

• Pressing A will move hands counterclockwise.

• Pressing B will move hands clockwise.

3. When hands reach 60 (zero), push crown back in to position 1.

OPERATING INSTRUCTIONS

Crown Positions:

Position 1 - Normal position.

Crown pushed against case.

Position 2 - To set DATE*:

Rotate crown clockwise.

Position 3 - To set TIME:

Rotate crown in either direction.

*NOTE: If the Date is set between 9:00 PM and 3:00 AM, the date

may not change on the following day.

This chronograph can be used to time events up to 59 minutes/59

seconds in duration, in whole second increments.

To Operate the Chronograph:

NOTE: Use Buttons A and B to operate the stopwatch timer.

IMPORTANT: Crown must be in position 1, and chronograph

hands must be at 60 (zero) before stopwatch is started. Do not use

chronograph while crown is pulled to position 2 or 3. If necessary,

press button B to reset chrono hands to zero before you start

timing.

Simple chronograph functions:

To measure the duration of a single, non-stop event:

1. Press button A to start chronograph.

2. Press button A a second time to stop chronograph.

3. Press button B to reset chronograph to zero.

Analog Chronographs 1/1 of a Second - Type D

with small chronograph seconds and 24-hour hands

To measure the combined time of a series of shorter events

(for example, the actual playing time of a football game, where play

is repeatedly interrupted):

1. Push button A to start the stopwatch when the event begins.

2. Push button A to stop the timing when the event is halted.

3. Press button A again when the event resumes.

4. Repeat steps 2 and 3 until event is ended.

5. Push button B to reset to zero.

To Synchronize Chronograph Hands:

After a battery change or in the event of an error, you may need

to manually adjust the chronograph small seconds hand to align it

correctly at the zero position, using push buttons A and B:

1. Pull crown out to position 3.

2. Use button A to move chronograph small seconds hand coun-

terclockwise or button B to advance it clockwise. Each push and

release will move hand by one second. Press and hold button A

or B to move hand rapidly in desired direction.

3. Once hand is properly aligned, push crown back in to position 1.

24-Hour display

Date display

Seconds hand

Small

chronograph

seconds hand

Chronograph

minute hand

Crown

OPERATING INSTRUCTIONS

OVERVIEW

This chronograph features a precise quartz chronograph move-

ment with minute counter (up to 30), tenths-of-a-second counter

(after 30 minutes, functions as an hour counter) and small seconds

subdials; center-mounted chronograph seconds hand; and sophis-

ticated calendar function with day and month display windows

and center-mounted date indicator hand. It can be used to time an

event up to 30 minutes in duration to the nearest 1/10 of a second,

or up to 10 hours in duration to the nearest second.

TIME/DATE SETTING

Setting the time:

1. As soon as small seconds hand S reaches 60-second position,

pull crown out to position 2. Watch will stop.

2. Turn crown in either direction to move hands to correct time,

making sure date changes at midnight, not noon.

3. Move hands slightly ahead of exact time, then slowly turn crown

counterclockwise to align minute hand M with correct minute

marker.

Legend

H - Hour hand

M - Minute hand

S - Small seconds hand (subdial at 2:30)

C - Chronograph seconds hand (center mounted)

E - Chronograph minutes counter (subdial at 9:30)

G - Chronograph tenths-of-a-second counter (subdial at 6)

D - Day of week window

J - Month window

F - Date indicator hand

1, 2 - Crown positions

A - Chronograph push-button (start/stop)

B - Chronograph push-button (reset)

Legend

H - Hour hand

M - Minute hand

S - Small seconds hand

C - Chronograph seconds hand

E - Chronograph minutes counter

G - Chronograph tenths-of-a-second counter

D - Day of week window

1, 2 - Crown positions

A - Chronograph push-button (start/stop)

B - Chronograph push-button (reset)

W - Day of week corrector (at 10 o’clock)

K - Month corrector (at 2 o’clock)

L - Date corrector (at 8 o’clock)

Analog Chronographs 1/10 of a Second

1 2 1 2

4. Take an accurate time signal (from a radio news station, for

example). The instant the audible tone signals exact time, push

crown back in to position 1. Watch will restart, now set to the

exact time.

Using Quick Date Change Feature:

Push date corrector button L located on side of case at 8 o’clock

to advance date rapidly – at the end of a month with fewer than

31 days, for example.

Each press and release of corrector button L will advance the date

by one day.

NOTE: If you use quick date change between 9:00 PM and 00:20

AM, set date to the following day; date will not automatically ad-

vance at midnight if corrector L is used between these hours.

Setting the Time, Date, Day of week and Month:

1. Pull crown out to position 2. Watch will stop.

2. Turn crown in either direction to move hands to correct time,

making sure date changes at midnight, not noon. (To set time to

exact second, see “Setting the time”.)

3. Push crown back in to position 1. Watch will restart.

NOTE: Each press and release on corrector buttons will advance

setting by one increment:

4. Use corrector button L (on side of case at 8 o’clock) to advance

date indicator hand F.

Crown Crown

2. Press button A a second time to stop chronograph, and read the

3 chronograph hands to determine elapsed time, for example:

4 minutes, 37 seconds, 5/10 of a second.

3. Press button B to reset chronograph hands to zero.

Accumulated time functions:

To measure the combined time of a series of shorter events, for

example the actual playing time of a football game, where play is

repeatedly interrupted:

1. Press button A to start chronograph.

2. Press button A a second time to stop chronograph.

3. Press button A again to resume measurement.

4. Press button A a fourth time to stop chronograph again.

NOTE: Each time you stop chronograph, chronograph hands will

indicate total accumulated time.

5. Repeat steps 1 and 2 to add each additional interval of time

6. After you have taken your final accumulated time reading, press

button B to reset chronograph hands to zero.

Split-time or intermediate-time functions:

To take intermediate time readings as a race progresses:

1. Press button A to start chronograph.

2. Press button B to momentarily stop chronograph.

3. Read off the intermediate time, for example: 10 minutes, 26

seconds, 3/10 of a second.

4. Press button B to resume chronograph function. Hands will

quickly catch up with ongoing event.

5. To read a second split time, press button B again.

Repeat steps 2 through 4 to take any additional split times.

6. When hand G reaches zero position, press push-button B.

7. Use push-button A again to adjust minute counter hand E.

8. When hand E reaches zero position, push crown back in to

position 1.

Timing hands are now synchronized at zero position, and

chronograph is ready for use.

5. Use corrector button W (on side of case at 10 o’clock) to ad-

vance day of week shown in day window D.

6. Use corrector button K (on side of case at 2 o’clock) to advance

month shown in month window J.

Chronograph Functions

Use buttons A and B to operate the chronograph. Pressing button

A the first time will start the chronograph. While the chronograph

is running, once the chronograph seconds counter hand C has

completed one turn, minute-counter hand E will jump ahead one

minute. Tenths-of-a-second hand G does not move when the

chronograph is running. Pressing button A a second time will stop

the chronograph and move hand G to the relevant tenth-of-a-sec-

ond mark. Pressing button B will reset hands G, E and C to zero.

Adjusting the time does not stop the chronograph, but it does block

buttons A and B for as long as the crown is pulled out.

To Operate the Chronograph:

IMPORTANT: Crown must be in position 1 and hands must be at

zero before chronograph is started. If necessary, press push-but-

ton B to reset hands to zero. If push-button A or B is accidentally

pressed with crown in position 2, one or more of the chronograph

hands may become de-synchronized. Should this occur, see direc-

tions for synchronizing hands at end of following instructions.

Simple chronograph functions:

To measure the duration of a single, non-stop event:

1. Press button A to start chronograph.

6. Press button A to stop chronograph.

7. Take a reading of the final time, for example: 27 minutes,

3 seconds, 4/10 seconds.

8. Press button B to reset chronograph hands to zero.

To Synchronize Chronograph Hands:

After a battery change or in the event of an error, you may need to

manually adjust one or more chronograph hand to align them all

correctly at their zero positions.

NOTES: Once in corrective mode, each press and release on

push-button A will advance active chronograph hand by one

increment. To advance hand rapidly, depress and hold

push-button A.

You may exit correction mode at any time in the sequence by

returning crown to position 1.

1. Pull crown out to position 2.

2. Press and hold push-buttons A and B simultaneously for at least

2 seconds to enter corrective mode. When chronograph sec

onds hand C rotates 360o, corrective mode is activated; release

buttons A and B.

3. Adjust center-mounted chronograph seconds hand C using

push-button A.

4. When hand C reaches zero position, press push-button B.

5. Now press push-button A to adjust tenths-of-a-second counter

hand G.

OPERATING INSTRUCTIONS

To Set the Date and Time:

Crown positions:

Position 1 - Normal position.

Crown pushed against case.

Position 2 - To set DATE*:

Rotate crown counterclockwise.

Position 3 - To set TIME:

Rotate crown in either direction.

*NOTE: If the Date is set between 9:00 PM and 3:00 AM, the date

may not change on the following day.

To Operate the Chronograph:

The chronograph function on this model can be used to time an

event up to 12 hours in duration to the nearest .05 seconds. Use

Buttons A and B to operate the stopwatch timer.

IMPORTANT: Crown must be in position 1, and chronograph

hands must be at 60 (zero) before stopwatch is started. Do not use

chronograph while crown is pulled to position 2 or 3. If necessary,

press button B to reset chrono hands to zero before you start

timing.

Simple chronograph functions:

To measure the duration of a single, non-stop event:

1. Press button A to start chronograph.

2. Press button A a second time to stop chronograph.

3. Press button B to reset chronograph to zero.

Analog Chronographs 1/20 of a Second

Split-time functions:

To take intermediate time readings as a race progresses:

1. Press button A to start chronograph.

2. Press button B to momentarily stop chronograph.

3. Read off the intermediate time.

4. Press button B to resume chronograph function. Hands will fly

back, catching up with ongoing event.

5. To read a second split time, press button B again.

Repeat steps 2 through 4 to take any additional split times.

6. Press button A to stop chronograph.

7. Take a reading of the final time.

8. Press button B to reset chronograph to zero.

NOTE: 1/20th Second chrono hand will stop running at 10 minutes,

while the inside mechanism continues to calculate.

To Synchronize Chronograph Hands:

After a battery change or in the event of an error, you may need

to manually adjust the chrono 1/20th of a second, second, minute

and hour hands to align them correctly at their zero positions.

NOTE: It is important to follow steps in this sequence:

1. Pull crown out to position 3.

2. Press and hold button B for 2 seconds and release.

3. Turn crown to move chrono 1/20th of a second hand to its zero

position.

4. Again press and hold button B for 2 seconds and release.

5. Turn crown to move chrono seconds hand to its zero position.

6. Press and hold button B a third time for 2 seconds and release.

7. Turn crown to move chrono minute and hour hands to their zero

positions.

8. If necessary, press and hold button B for 2 seconds and release

to return mechanism to 1/20th of a second hand adjustment

9. When finished with chrono hand adjustment, push crown back in

to position 1.

Minute hand

Start/stop

Crown

Split/reset

Date display

24-Hour hand

Chronograph

seconds hand

Small

seconds hand

Hour hand

1/20 second

chronograph hand

OPERATING INSTRUCTIONS

Certain bracelet watches feature bar-shaped connecting links

that function like jewelry clasps, allowing you to achieve a quick,

custom fit.

TIPS: We recommend that you adjust one side of the bracelet at a

time.

To ensure that the watch will sit properly on the wrist, it is best to

remove/add an equal number of links on each side. If you must

remove an odd number, take the extra link from the 6 o’clock side.

To remove links:

1. Hold one side of watch bracelet as shown, with a regular link

grasped between the thumb and index finger of each hand, and

one bar clasp link between them.

2. Gently twist your hands in opposite directions to “pop” the bar

clasp link open.

3. Repeat steps 1 and 2 further along length of bracelet, to remove

the desired number of links.

To reattach links:

1. Line up the two lengths of bracelet you wish to reconnect side

by side, face up.

2. Use an open bar clasp link to rejoin them: Once the bar link is

in proper position, squeeze it together between your fingers

until you feel it snap closed, locking the bracelet sections back

together.

Repeat process above to remove and reattach links on other side

of bracelet.

Removable Links

REGULAR

BRACELET LINK

BAR CLASP

LINK

OPERATING INSTRUCTIONS

Certain bracelet watches feature bar-shaped connecting links

that function like jewelry clasps, allowing you to achieve a quick,

custom fit.

TIPS: We recommend that you adjust one side of the bracelet at a

time.

To ensure that the watch will sit properly on the wrist, it is best to

remove/add an equal number of links on each side. If you must

remove an odd number, take the extra link from the 6 o’clock side.

To remove links:

1. Hold one side of watch bracelet as shown, with a regular link

grasped between the thumb and index finger of each hand, and

one bar clasp link between them.

2. Gently twist your hands in opposite directions to “pop” the bar

clasp link open.

3. Repeat steps 1 and 2 further along length of bracelet, to remove

the desired number of links.

To reattach links:

1. Line up the two lengths of bracelet you wish to reconnect side

by side, face up.

2. Use an open bar clasp link to rejoin them: Once the bar link is

in proper position, squeeze it together between your fingers

until you feel it snap closed, locking the bracelet sections back

together.

Repeat process above to remove and reattach links on other side

of bracelet.

Removable Links

REGULAR

BRACELET LINK

BAR CLASP

LINK

Regatta Chronograph

20 21

WATER RESISTANT

10 ATM

2040

1050

40 20

Seconds hand

Central hand

To display:

•count down

minutes

•race timing

minutes

Push button A

•START/STOP

Push button B

•Reset

•Count down

timer setting

•Second chance

count down

adjustment

•Select the

display of

hours/seconds

counted at the

10H counter

Alarm hand

Minute hand

Important: The measurement of time starts

by the count down, then followed by the race timing.

Hour/seconds

counter

To display:

•count down

seconds

•race timing

hours

Push button C

•alarm

ON/OFF

OPERATING INSTRUCTIONS

Interchangeable Bracelet/Strap Models

Tension-pin style

REMOVING STRAP (a) REPLACING STRAP (b)

OPERATING INSTRUCTIONS

Interchangeable Bracelet/Strap Models

Hook and bar style

Removing Strap Replacing Strap

22 23

OPERATING INSTRUCTIONS

Convertible Bracelet/Strap Models

134

Converting Bracelet to Strap

OPERATING INSTRUCTIONS

Certain bracelet watches feature bar-shaped connecting links

that function like jewelry clasps, allowing you to achieve a quick,

custom fit.

TIPS: We recommend that you adjust one side of the bracelet at a

time.

To ensure that the watch will sit properly on the wrist, it is best to

remove/add an equal number of links on each side. If you must

remove an odd number, take the extra link from the 6 o’clock side.

To remove links:

1. Hold one side of watch bracelet as shown, with a regular link

grasped between the thumb and index finger of each hand, and

one bar clasp link between them.

2. Gently twist your hands in opposite directions to “pop” the bar

clasp link open.

3. Repeat steps 1 and 2 further along length of bracelet, to remove

the desired number of links.

To reattach links:

1. Line up the two lengths of bracelet you wish to reconnect side

by side, face up.

2. Use an open bar clasp link to rejoin them: Once the bar link is

in proper position, squeeze it together between your fingers

until you feel it snap closed, locking the bracelet sections back

together.

Repeat process above to remove and reattach links on other side

of bracelet.

Removable Links

REGULAR

BRACELET LINK

BAR CLASP

LINK

Boss Black Racing Watch

SEC

ALARM

3 9

MIN

45 15

Hour hand

STOPWATCH

1/5-second hand

Small second hand

Minute hand

24-hour hand

ALARM

Minute hand

ALARM

Hour hand

STOPWATCH

Minute hand

Date

Crown

N: Normal

1: First click position

2: Second click position

How to Set Time and Date:

　Pull crown out to the 1st click position.

Pull out

1st. position

SEC

ALARM

3 9

MIN

45 15

　Turn the crown clockwise until the previous day’s

date appears.

Note: Do not set the date between 9:00 PM and 1:00 AM.

Otherwise, the date may not change properly.

SEC

ALARM

3 9

MIN

45 15

　Pull crown out to the 2nd click position when

the second hand is at the 12 o'clock position.

Note: When the stopwatch has been measuring or is stopped, if the

crown is pulled out to the 2nd. click position, it will automatically

reset the Stopwatch hands to “0”.

Pull out

2nd. position

SEC

ALARM

3 9

MIN

45 15

How to Set Time and Date:

　Pull crown out to the 1st click position.

Pull out

1st. position

SEC

ALARM

3 9

MIN

45 15

　Turn the crown clockwise until the previous day’s

date appears.

Note: Do not set the date between 9:00 PM and 1:00 AM.

Otherwise, the date may not change properly.

SEC

ALARM

3 9

MIN

45 15

　Pull crown out to the 2nd click position when

the second hand is at the 12 o'clock position.

Note: When the stopwatch has been measuring or is stopped, if the

crown is pulled out to the 2nd. click position, it will automatically

reset the Stopwatch hands to “0”.

Pull out

2nd. position

SEC

ALARM

3 9

MIN

45 15

How to Set Time and Date:

　Pull crown out to the 1st click position.

Pull out

1st. position

SEC

ALARM

3 9

MIN

45 15

　Turn the crown clockwise until the previous day’s

date appears.

Note: Do not set the date between 9:00 PM and 1:00 AM.

Otherwise, the date may not change properly.

SEC

ALARM

3 9

MIN

45 15

　Pull crown out to the 2nd click position when

the second hand is at the 12 o'clock position.

Note: When the stopwatch has been measuring or is stopped, if the

crown is pulled out to the 2nd. click position, it will automatically

reset the Stopwatch hands to “0”.

Pull out

2nd. position

SEC

ALARM

3 9

MIN

45 15

How to Set Time and Date:

OPERATING INSTRUCTIONS

Certain bracelet watches feature bar-shaped connecting links

that function like jewelry clasps, allowing you to achieve a quick,

custom fit.

TIPS: We recommend that you adjust one side of the bracelet at a

time.

To ensure that the watch will sit properly on the wrist, it is best to

remove/add an equal number of links on each side. If you must

remove an odd number, take the extra link from the 6 o’clock side.

To remove links:

1. Hold one side of watch bracelet as shown, with a regular link

grasped between the thumb and index finger of each hand, and

one bar clasp link between them.

2. Gently twist your hands in opposite directions to “pop” the bar

clasp link open.

3. Repeat steps 1 and 2 further along length of bracelet, to remove

the desired number of links.

To reattach links:

1. Line up the two lengths of bracelet you wish to reconnect side

by side, face up.

2. Use an open bar clasp link to rejoin them: Once the bar link is

in proper position, squeeze it together between your fingers

until you feel it snap closed, locking the bracelet sections back

together.

Repeat process above to remove and reattach links on other side

of bracelet.

Removable Links

REGULAR

BRACELET LINK

BAR CLASP

LINK

OPERATING INSTRUCTIONS

Certain bracelet watches feature bar-shaped connecting links

that function like jewelry clasps, allowing you to achieve a quick,

custom fit.

TIPS: We recommend that you adjust one side of the bracelet at a

time.

To ensure that the watch will sit properly on the wrist, it is best to

remove/add an equal number of links on each side. If you must

remove an odd number, take the extra link from the 6 o’clock side.

To remove links:

1. Hold one side of watch bracelet as shown, with a regular link

grasped between the thumb and index finger of each hand, and

one bar clasp link between them.

2. Gently twist your hands in opposite directions to “pop” the bar

clasp link open.

3. Repeat steps 1 and 2 further along length of bracelet, to remove

the desired number of links.

To reattach links:

1. Line up the two lengths of bracelet you wish to reconnect side

by side, face up.

2. Use an open bar clasp link to rejoin them: Once the bar link is

in proper position, squeeze it together between your fingers

until you feel it snap closed, locking the bracelet sections back

together.

Repeat process above to remove and reattach links on other side

of bracelet.

Removable Links

REGULAR

BRACELET LINK

BAR CLASP

LINK

Boss Black Racing Watch Boss Black Racing Watch

　Pull crown out to the 1st click position.

Pull out

1st. position

SEC

ALARM

3 9

MIN

45 15

Press button “B” repeatedly to set the Alarm hands

to the desired alarm time.

Note: The Alarm hands move quickly if button “B” is kept pressed.

SEC

ALARM

3 9

MIN

45 15

　Push crown back to normal position.

Note: The alarm is automatically engaged.

Push back

Normal position

SEC

ALARM

3 9

MIN

45 15

Pull crown out to the 1st click position.

Pull out

1st. position

SEC

ALARM

3 9

MIN

45 15

Press and hold button “B” until Alarm hands

stop and indicate the current time.

Note: The Alarm hands move quickly if button “B” is kept pressed.

SEC

ALARM

3 9

MIN

45 15

　Push crown back to normal position.

Note: The alarm is automatically engaged.

Push back

Normal position

SEC

ALARM

3 9

MIN

45 15

　Pull crown out to the 1st click position.

Pull out

1st. position

SEC

ALARM

3 9

MIN

45 15

Press button “B” repeatedly to set the Alarm hands

to the desired alarm time.

Note: The Alarm hands move quickly if button “B” is kept pressed.

SEC

ALARM

3 9

MIN

45 15

　Push crown back to normal position.

Note: The alarm is automatically engaged.

Push back

Normal position

SEC

ALARM

3 9

MIN

45 15

　Pull crown out to the 1st click position.

Pull out

1st. position

SEC

ALARM

3 9

MIN

45 15

Press and hold button “B” until Alarm hands

stop and indicate the current time.

Note: The Alarm hands move quickly if button “B” is kept pressed.

SEC

ALARM

3 9

MIN

45 15

　Push crown back to normal position.

Note: The alarm is automatically engaged.

Push back

Normal position

SEC

ALARM

3 9

MIN

45 15

　Pull crown out to the 1st click position.

Pull out

1st. position

SEC

ALARM

3 9

MIN

45 15

Press button “B” repeatedly to set the Alarm hands

to the desired alarm time.

Note: The Alarm hands move quickly if button “B” is kept pressed.

SEC

ALARM

3 9

MIN

45 15

　Push crown back to normal position.

Note: The alarm is automatically engaged.

Push back

Normal position

SEC

ALARM

3 9

MIN

45 15

SEC

ALARM

3 9

MIN

45 15

STOPWATCH

1/5-second hand

STOPWATCH

Minute dial

STOPWATCH

Minute hand

　Pull crown out to the 1st click position.

Pull out

1st. position

SEC

ALARM

3 9

MIN

45 15

Press and hold button “B” until Alarm hands

stop and indicate the current time.

Note: The Alarm hands move quickly if button “B” is kept pressed.

SEC

ALARM

3 9

MIN

45 15

　Push crown back to normal position.

Note: The alarm is automatically engaged.

Push back

Normal position

SEC

ALARM

3 9

MIN

45 15

How to Set Alarm: How to Use Stopwatch Functions:

Thestopwatchcanmeasureupto59’59”80in1/5secondincrements.

After60minutes,itwillstartcountingagainfrom“0”repeatedlyto12hours.

Whenthemeasurementreaches12hours,thestopwatchautomaticallystopscounting.

How to Cancel the Alarm Time You Have Set:

26 27

WaRRanTy & seRvICe InfoRMaTIon

Please see the printed warranty and service guide enclosed with

your watch for complete warranty and service information – or

return to our service website home page and click on the Warranty

and Service Information link.

28 25

CARE AND MAINTENANCE

Your watch has been developed with meticulous attention to qual-

ity, function and detail. Please read the following information and

instructions carefully to learn about the features, proper care and

operation of your new timepiece.

For additional information on service and repairs, please see your

Warranty & Service Guide booklet – or return to our service web-

site home page and click on the Warranty and Service Information

link.

Shock

All our watches have shock-resistant movements and are tested to

meet international standards for shock resistance.

Magnetism

The exposure of a timepiece to a strong magnetic field will affect

its time-keeping, and may cause it to stop. A quartz watch should

resume working with its original accuracy when removed from the

magnetic field; an automatic or hand-wound mechanical timepiece,

however, may require demagnetization before it will operate again.

Water Resistance

All our watches meet international standards for water resistance

to at least 3ATM / 30M / 99 feet, so faucet spray or rain won’t hurt

them as long as the case, crown and crystal remain intact.

Timepieces marked water resistant to 50M / 5 ATM / 165 feet may

be worn while showering or swimming, but not scuba diving.

CAUTION: Do not press the push-buttons on a chronograph model

when the watch is under water, or it will not remain water resistant.

NOTES: We recommend that you do not get your leather strap

wet. Exposing leather to water can cause premature wear and

deterioration.

Carefully wipe your watch using a soft cloth dampened with fresh

water after exposure to chlorine or sea water.

Battery Information

Your quartz analog watch or chronograph has a battery specially

designed for watches. It will last approximately 18-36 months

under normal use.

NOTE: Frequent use of special functions, like the stopwatch timer

on chronograph models, may shorten battery life.

End-of-life feature: The seconds hand on many models will start to

move haltingly in 4-second increments when the battery is almost

exhausted, signaling the need to have it replaced.

Battery replacement: Take or send your watch to an Authorized

Service Center to have battery changed – your old battery will be

disposed of/recycled properly. Do not attempt to change the bat-

tery yourself.

Warranty and Service Information

Please see the printed warranty and service guide enclosed with

your watch for complete warranty and service information – or

return to our service website home page and click on the Warranty

and Service Information link.

WATCH CARE AND MAINTENANCE, OPERATING INSTRUCTIONS

WARRANTY AND SERVICE GUIDE

Seconds Hand

Date Display

Time setting

Pullcrowntoposition2.Tosettimerotatecrownineitherdirection.

Date setting

Pullcrowntoposition1.Tosetdaterotatecrownineitherdirection.

OPERATING INSTRUCTIONS

Crown Positions:

Position 1 - Normal position.

Crown pushed against case.

Position 2 - To set TIME:

Rotate crown in either direction.

2- and 3-Hand Models

448

11-3-04

1 2

Crown

Seconds hand

Time setting

PressAkeytwicetoentryTimeSettingmode,selectiteminturnas

following:Month/Day/Hour/Minute

PressBkeytoadjusttheashingitem.

PressAkeytoconrm.

B - MODE

A - SET

OPERATING INSTRUCTIONS

Convertible Bracelet/Strap Models

134

Converting Bracelet to Strap

Digital models

Time setting

OPERATING INSTRUCTIONS

Multi-eye watches are powered by multi-function movements that

enable them to report such information as month, weekday and

date via apertures or “eyes” in the dial.

Multi-Eye Models

925

Tatiana G 10.26.07

Designer:

Project #:

Creation: Modification:

4.28.08

1 2 3

Day hand

Crown

24-Hour time

hand

Date hand

Second

hand

OPERATING INSTRUCTIONS

Multi-eye watches are powered by multi-function movements that

enable them to report such information as month, weekday and

date via apertures or “eyes” in the dial.

Multi-Eye Models

925

Tatiana G 10.26.07

Designer:

Project #:

Creation: Modification:

4.28.08

1 2 3

Day hand

Crown

24-Hour time

hand

Date hand

Second

hand

Day counter

24 hours counter

Date counter

Time setting

1. Real Time

Atanymode,pressAkeytoELbackbright.

Timesetting:

PressCkeytoenterTimeSettingstate

PressBkeyto select«Hour»,«Minute», «Year»,

«Month»,«Day»setting

PressDkeytoadjusttheashingitemandpress

CkeytoreturntoRealTimemode

DualTimesetting:

At Time Setting state, press A key to select

12/24Hformat.

2. Schedual Alarm

AlarmTimesetting:

PressCkeytoenterAlarmSettingstate

«Hour» ashing at this time and Alarm be ON

automatically

PressBkeyto select«Hour»,«Minute», «Year»,

«Month»,«Day»setting

PressDkeytoadjusttheashingitemandpress

CkeytoreturntoAlarmmode

AlarmandChimeON/OFF:

AtAlarmoriginalstate,pressAkeytobeON/OFF

Alarm( )andChime( ).

WhenAlarmTimeover,alertsounding

andindicator( )ashingforabout20s.

3. Timer

Timertimesetting:

PressCkeytoenterTimerTimeSettingstate:

PressAkeytobeON/OFF

PressBkeytoselect«Hour»,«Minute»and

«Second»setting

PressDkeytoadjusttheashingitemandpress

CkeytoreturntoTimermode

Operate:

PressDkeytoStart/Stopcounting:PressCkeyto

resetwhencountingStop;

Thereis10salertsoundingswhennishcounting.

4. Chronograph

PressDkeytoStart/Stopcounting:

Whenstop,pressAkeytozero;

Whencounting,pressBkeytoRealTimemode,

andStopwatchrunningatback.

(D Key) Start/stopLight /Reset (A Key)

(C Key) SetMode (B Key)

OPERATING INSTRUCTIONS

Convertible Bracelet/Strap Models

134

Converting Bracelet to Strap

Digital models

Time setting

1. At any state, press A key EL backlight for 3s.

2. Chronograph

PressDkeytoStart/Stoprunning;

Whenstop,pressCkeytozero.

Whenrunning,pressCkeytosplitcount.indica-

tor«SP»showing

Then press ＤD key to exit split count ,and stop

counting;pressＤCkeyagaintozero;

Whenrunning,pressＤBkeytoreturntoRealTime

Mode,anditrunningatback.

3. Daily Alarm

TurnOn/OffAlarmandChime

Press D key to turn on/off Alarm ( ) or Chime

( ).

Alarm setting: Press C key to select «Hour»

or «Minute» setting, Press D key to adjust the

ashingitem,PressCkeytoconrm,PressBkey

toreturntoRealTimemode.

Ｄ

AlarmSnoozeON/OFF

At Alarm sounding state, press Ｄkey or D key

to stop sounding, and press B key to ON/OFF

snoozefunction.WhenSnoozefunctionbeON,it

willsoundveminuteslater,andautostopafter

soundingfor20Second.

4. Time Setting

«Second» ashing when loading, press D key

to zero; Press C key to select item as following

sequence:

Hour –> Minute –> Month –> Day –> Day of

Week–>Second

Whensetting«Hour»,«H»displayfor24Hformat;



«A»or«P»for12Hformat.

PressDkeywhile the secondsare in the range

of30to59resetsthemto00andadds1tothe

minutes.Intherangeof00to29,theminutesare

unchanged.

(D Key) Start/stopLight /Reset (A Key)

(C Key) SetMode (B Key)

OPERATING INSTRUCTIONS

Convertible Bracelet/Strap Models

134

Converting Bracelet to Strap

Ana-digi models

RealTime

BKey

–>

BKey

–>

BKey

–>

Chronograph Alarm Timesetting

Hugo Boss 1512323 Users Manual ManualsLib Makes It Easy To Find Manuals Online!

Navigation menu

Versions of this User Manual:

Views

Navigation