Humax T1 11n Wireless Roaming Router User Manual IP04305

Humax Co., Ltd. 11n Wireless Roaming Router IP04305

Users Manual

T1 ExtenderT1 RouterWPSInternetElectrical OutletPCGaming Console &Media SharingMobile PhoneModemElectrical OutletQuick Start GuideWireless or Wired, it's n Wireless Roaming Router QUANTUM T11. Connecting the InternetYou can connect your product to the Internet over a direct WAN or through a modem. 1-1 If you access Internet by the modem such as ADSL, VDSL, cable and FTTH, plug one end of the Ethernet cable to the Internet port of your product and the other end to the LAN port of your modem. 1-2 If you access the Internet by WAN broadband, plug the Ethernet cable to the Internet port of your product. 4. Connecting the Network Devices You can connect your network devices to the router over wired or wirelessly.Use Ethernet cables to connect your devices to the router over a wired Ethernet connection. Note: We recommend you to connect entertainment devices such as OTT, gaming console and IPTV to the Entertainment ports. The ports have the priority in transmitting multimedia data without transmission delay or interruption.Internet ConnectionYou can congure the network over a wired Ethernet connection or wirelessly.Wired Connect the Ethernet cable between the PC and the LAN port of your product. Wireless 1. Open the web browser.2. Enter http://dearmyrouter.net to the address bar, and then press the Enter key.3. The default ID and password are admin and nnnn. nnnn is the last 4 digits of serial number. Refer to the serial number at the bottom of your product.Note: We recommend you to change the ID and password to secure your network. Go to Management > Change Password to change your password.Q-MODEYour product supports Q-MODE that enables operating as a router or an extender.It’s very simple to change the operation mode. Just slide the Q-MODE switch to ROUTER or EXTENDER. Then, the mode change is automatically completed.3. Powering On1. Plug in the AC power adaptor from the power connector to an electrical outlet. 2. If the power successfully turns on, a white light on the power LED is turned on.Note: Use only the AC power adaptor provided in this product. Using other adaptors may damage the product.You can congure WPS between the extender and the router.3-1 Press the WPS buttons on both devices within 2 minutes. When WPS is successfully congured, the blue light blinks on the Wireless LED.Note: If you use another router other than HUMAX product, the white light blinks on the Wireless LED, which means your extender is in repeater mode. 2. Powering On2. Checking the ModeYour product has the Q-MODE switch. Check that the switch is set to ROUTER. 1. Changing the ModeYour product has the Q-MODE switch. Slide the switch to EXTENDER.Warning1. Connect all devices before you plug any power cords into the electrical outlet.2. Always turn o the product and network devices before you connect or disconnect any cables.3. Hazardous electrical voltages can exist on the product and peripheral devices and can be present on any connected cables.- With HUMAX QUANTUM Series, you will experience seamless Wi-Fi network at any moment.- T1, T2, T3, T3A, X1 and X3 support both roaming & mesh network, and T5, T7 and T9 support roaming network only.- Roaming & mesh feature is congured over HUMAX products. (*)BOTH*Roaming Mode*Mesh Mode123456789T1T2Designed by Humax (Korea)Made in ChinaRouter Login:http://dearmyrouter.netID: adminPassword: nnnn S/N: QT1YYWWnnnnnnMac: DCDC8321000001Model: QUANTUM T1 Code: 4-00021Power Input: 12V , 0.5ASSID: We Love You So MuchPassword: humax_nnnn※Please change Login Password and Wi-Fi Password for Security.123456789Designed by Humax (Korea)Made in ChinaRouter Login:http://dearmyrouter.netID: adminPassword: nnnn S/N: QT1YYWWnnnnnnMac: DCDC8321000001Model: QUANTUM T1 Code: 4-00021Power Input: 12V , 0.5ASSID: We Love You So MuchPassword: humax_nnnn※Please change Login Password and Wi-Fi Password for Security.Scan the QR code to access @@ on your mobile device. Use it as RouterUse it as Extender1-11-2Extender has wireless connectivity with a third party router* Roaming & mesh network is congured over HUMAX products edoM retuoRWISP ModeAP ModeRepeater ModeMedia Bridge ModeLEDs on the Front PanelAfter the product is successfully registered on the network, the LEDs illuminate continuously to indicate that the product is active and fully operational.LED OperationPower White On Power is on.InternetWhite On Internet is connected. White Blinking Firmware update is in progress.Internet is not connected.WirelessWhite On Network is connected wirelessly.White Slow Blinking 2 minutes.White Fast BlinkingBlue OnBlue Slow Blinking 2 minutes.Blue Fast BlinkingWi-Fi is not available. Ethernet White On Networking device is connected to the LAN port.No device is connected to the LAN port.Internet, Wireless, Ethernet Blinking Resetting the system is in progress. Note: Blue light is turned on when the roaming & mesh network is successfully congured over HUMAX products. 3-2 Check the network when the connection is complete. If you connect the extender to a HUMAX router, both network names are the same as if they congure a single network. But, if you use a router other than HUMAX products, the network name of your extender will copy the router›s name following Ext2G or Ext5G. (ex. Router_Ext5G)Welcome to QUANTUM T1!http://dearmyrouter.net192.168.1.1admin****Password! For the default ID and password, see the bottom of the product.LoginIDROUTER EXTENDER11111111

Navigation menu