Humax T2 11n Wireless Roaming Router User Manual 3

Download:
Mirror Download [FCC.gov]
Document ID	3343075
Application ID	2ILAXYU2qW7XksvNexdNXg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	274.4kB (3430014 bits)
Date Submitted	2017-04-03 00:00:00
Date Available	2017-04-03 00:00:00
Creation Date	2017-12-28 21:20:53
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-28 21:20:53
Document Title	未标题-3
Document Creator	Adobe Illustrator CS6 (Windows)

WPS
Use it as Router
LEDs on the Front Panel
After the product is successfully registered on the network, the LEDs illuminate continuously to indicate
that the product is active and fully operational.
Electrical Outlet
3. Powering On
LED
Operation
1. Plug in the AC power adaptor from the power connector to an electrical outlet.
Quick Start Guide
Power
2. If the power successfully turns on, a white light on the power LED is turned on.
Note: Use only the AC power adaptor provided in this product. Using other
adaptors may damage the product.
Wireless or Wired, it's 11n Wireless Roaming Router
Internet
QUANTUM T2
White On
Power is on.
White On
Internet is connected.
White Blinking
Firmware
update is in progress.
WPS
Internet is not connected.
Warning
White On
1. Connect all devices before you plug any power cords into the electrical outlet.
White Slow Blinking
2. Always turn off the product and network devices before you connect or
disconnect any cables.
White Fast Blinking
2 minutes.
Blue On
Wireless
3. Hazardous electrical voltages can exist on the product and peripheral devices
and can be present on any connected cables.
Network is connected wirelessly.
Blue Slow Blinking
2. Checking the Mode
2 minutes.
Blue Fast Blinking
Your product has the Q-MODE switch.
Wi-Fi is not available.
Check that the switch is set to ROUTER.
White On
Ethernet
Networking device is connected to the LAN port.
No device is connected to the LAN port.
Internet, Wireless, Ethernet Blinking
Modem
Note: Blue light is turned on when the roaming & mesh network is successfully configured over HUMAX
products.
T1 Router
Internet
Resetting the system is in progress.
PC
Q-MODE
Mobile Phone
Your product supports Q-MODE that enables operating as a router or an extender.
1-1
Storage Sharing
It’s very simple to change the operation mode. Just slide the Q-MODE switch to ROUTER or EXTENDER.
Then, the mode change is automatically completed.
Printer Sharing
Gaming Console &
Media Sharing
1. Connecting the Internet
4. Connecting the Network Devices
1-2
You can connect your network devices to the router over wired or wirelessly.
You can connect your product to the Internet over a direct WAN or through a modem.
1-1 If you access Internet by the modem such as ADSL, VDSL, cable and FTTH, plug one end of the Ethernet
cable to the Internet port of your product and the other end to the LAN port of your modem.
1-2 If you access the Internet by WAN broadband, plug the Ethernet cable to the Internet port of your product.
Use Ethernet cables to connect your devices to the router over a wired Ethernet connection.
Note: We recommend you to connect entertainment devices such as OTT, gaming console and
IPTV to the Entertainment ports. The ports have the priority in transmitting multimedia
data without transmission delay or interruption.
ROUTER
Router Mode
WISP Mode
Use it as Extender
BOTH
EXTENDER
AP Mode
Repeater Mode
Media Bridge Mode
*Roaming Mode
*Mesh Mode
Internet Connection
Electrical Outlet
You can configure the network over a wired Ethernet connection or wirelessly.
Wired
2. Powering On
Wireless
1. Open the web browser.
1. Changing the Mode
- With HUMAX QUANTUM Series,
you will experience seamless Wi-Fi network at any moment.
- T1, T2, T3, T3A, X1 and X3 support both roaming & mesh network, and T5, T7 and
T9 support roaming network only.
- Roaming & mesh feature is con฀gured over HUMAX products. (*)
Connect the Ethernet cable between the PC and the LAN port
of your product.
123456789
123456789
Your product has the Q-MODE switch.
Slide the switch to EXTENDER.
2. Enter http://dearmyrouter.net to the address bar, and then press the Enter key.
※
※
3. The default ID and password are admin and nnnn. nnnn is the last 4 digits of serial number.
Refer to the serial number at the bottom of your product.
Note: We recommend you to change the ID and password to secure your network.
Go to Management > Change Password to change your password.
WPS
Extender has wireless connectivity
with a third party router
T1 Extender
* Roaming & mesh network is configured
over HUMAX products
Welcome to QUANTUM T2!
http://dearmyrouter.net
192.168.1.1
123456789
You can configure WPS between the extender and the router.
Scan the QR code
to access @@ on your mobile device.
3-2 Check the network when the connection is complete.
If you connect the extender to a HUMAX router, both network names
are the same as if they configure a single network. But, if you use a router
other than HUMAX products, the network name of your extender will
Note: If you use another router other than HUMAX product, the white light blinks
copy the router›s name following Ext2G or Ext5G. (ex. Router_Ext5G)
on the Wireless LED, which means your extender is in repeater mode.
3-1 Press the WPS buttons on both devices within 2 minutes. When WPS is
successfully configured, the blue light blinks on the Wireless LED.
ID
admin
Password
****
FCC ID:O6ZT2
211-170302
Login
※
For the default ID and password, see the bottom of the product.
D170007211
WPS
etwork.
3. Wireless Network Setting
Router Mode
Enter your own network name and password to change the default settings. You can secure your
wireless network from unauthorized users.
1. Welcome
WPS
Click Start. The system will check automatically if your router is connected to the Internet.
2-1. Roaming & Mesh
WISP Mode
Just press the WPS buttons on HUMAX products within 1 second. Then, they are connected each
You can use wireless Internet service in Router mode.
over the mesh network.
1. Log in to dearmyrouter.net, and then go to Management > WISP Mode.
Wireless Setting
2. Set the WISP mode to On, and select your Internet service provider.
Welcone to Quantum T2 !
WISP Mode
This is Quantum T2,
2.4GHz
Network Name (SSID)
Complies with 11n Wi-Fi standard.
Wi-Fi 600 Mbps speed.
Provides WEP 64/128-bit, WPA, WPA2 and WPA-Mixed security.
Supports Guest Network ,Media Share, QoS, Parental Control, VPN, WPS etc.
Supports Smart Roaming for Mobile Client.
Supports Power Saving, LED Control, System Restart for energy saving.
In this mode, all Ethernet ports are bridged together and the wireless client will connect to ISP access
point. The NAT is enabled and PCs in Ethernet ports share the same IP to ISP through wireless LAN.
We Love You So Much
**********
Network Name (SSID)
CH
RSSI
Security
MAC Address
Band
We Love You So Much
-45
WPA2-PSK
BC:76:70:7C:5C:74
2.4GHz
TIANA_89
-47
WPA2-PSK
F8:D1:11:5C:84:BA
2.4GHz
ASUS
-51
WPA2-PSK
70:7C:F8:D1:11:55
2.4GHz
Wafya
-26
None
11:5C:54:D8:33:98
2.4GHz
NETGEAR
-51
WPA2-PSK
70:7C:F8:D1:11:55
2.4GHz
iptime
-77
WEP
5C:74:31:AB:C1:D2
2.4GHz
? About wireless security and password. view more
Previous
Next
Start
4. Password Setting
Note:
If you want to skip the installation wizard, click Skip. This button is available always during
installation wizard.
Password
Enter your ID and password to change the default password. You can enhance the security on your
network environment.
Back
HUMAX each other two products that you want to connect to, you can simply Extended Network via the WPS button.
Place the product on where to actual use, press the WPS button on your product.
Tip!
Minimizing the walls, furniture, appliances, etc. to connect between the two products,
and the products work best when operating at up to 12m (40 feet) inside and outside.
Refresh
Select the device and enter the password to connect the host device.
Password
You can more easily set various functions through web UI and experience fabulous router.
Do you want to start the wizard for easy setup?
Roaming & Mesh Setting
and add new products are the closest connection automatically.
WPS
**********
Start WPS Process...
Connect
Previous
Change Password (Optional)
2-2. Repeater
2. Internet Setting
You can connect the Internet automatically or manually depending on your Internet connection type.
Extender Mode
If you change the password, you can make your network more secure.
For the default ID and password, see the bottom of the product.
Note: This page appears only when your product is not connected to the Internet.
Slide the Q-MODE switch to EXTENDER.
The changed password will be applied from the next login.
Internet Setting
If you have a networking device other than HUMAX products, select it from the list and then enter
the password. You will experience stronger and wider Wi-Fi signal.
Repeater Setting
Login ID
admin
Current Password
**********
New Password
**********
Retype New Password
**********
Select a device from the list below and enter the password to connect to the host device.
Using the WPS button on both devices, you can easily connect them.
of the host device. In this case, the host operates automatically in Bridge mode.
Previous
If you do not know the Internet connection type, please contact your ISP.
Connection Type
Dynamic IP
WPS
Next
‫ۂ‬
5. Summary
? What is the Dynamic IP/Static IP/PPPoE/PPTP/L2TP? view more
Previous
When you complete your network settings, the information on your network will display.
Next
Summary
Internet
Connection Type
Select the connection type your ISP is using. In most cases, it will be Dynamic IP.
Dynamic IP: The Internet will be connected automatically.
Static IP: Enter the IP address, Subnet mask, Gateway and DNS server supplied by the ISP.
PPPoE: Enter the user name and password supplied by the ISP.
PPTP or L2TP: Enter the user name, password and VPN server supplied by the ISP.
IP Address
Wireless 2.4GHz
Internet Setting
Dynamic IP
100.1.1.1
255.255.255.0
192.168.1.1
0.0.0.0
0.0.0.0
Connection Type
WAN IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
Previous
Next
100.1.1.1
Network Name (SSID)
Previous
CH
RSSI
Security
MAC Address
Band
IPTime Zone
-45
TIANA_89
-47
WPA2-PSK
BC:76:70:7C:5C:74
2.4GHz
WPA2-PSK
F8:D1:11:5C:84:BA
ASUS
2.4GHz
-51
WPA2-PSK
70:7C:F8:D1:11:55
Wafya
2.4GHz
-26
None
11:5C:54:D8:33:98
2.4GHz
Password
Back
**********
Next
We Love You So Much
Password
Note: For more information on the Internet connection, refer to the web manual at
www.humaxdigital.com/QUANTUM.
If your router is successfully connected to the Internet, the information on the internet connection will
display.
Dynamic IP
Network Name (SSID)
x T2 works automatically in AP mode if you connect it to a router over a wired Ethernet cable and use a
client device wirelessly.
x T2 works automatically in media bridge mode if you connect it to a router wirelessly and use a client
device over a wired Ethernet cable.
x T2 works automatically in repeater mode if you connect it wirelessly to a router other than a HUMAX
router and use a client device wirelessly.
x If T2 works together with a HUMAX router, the roaming & mesh network
products.
humax_0000
Done
1. Welcome
HUMAX
products only, click HUMAX Products and go to
2-1. Roaming & Mesh.
FCC warning:
If you use a third party product other than
HUMAX, click Other Products and go to
2-2 Repeater.
Home
After completing the network settings, go to Operation Mode. In this page, you can see the current
status of your product.
Welcome to Extended Network
Home
user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Consult the dealer or an experienced radio/TV technician for help.
Your product has changed to Extender mode. In this mode, you can expand Wi-Fi coverage.
This page shows the current status and some basic settings of the device.
2.4G
plug the Ethernet cable into the WAN port of your product.
In this case, the product operates automatically in Bridge mode.
Select a product you want to connect wirelessly.
HUMAX Products
Dynamic IP
10.10.10.1
Other Products
QUANTUM T2
SanULTRA DUAL_1
Internet
Next
Operation Mode
Router Mode
Connection Status
Dynamic IP
IP Address
183.99.19.131
Subnet Mask
255.255.255.128
Gateway
183.99.19.129
DNS Server
168.126.63.1/168126.63.2
MAC Address
F4:28:53:35:C3:F9
4 Devices

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:9e52c641-9d71-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:10 09:49:30Z
Create Date                     : 2017:07:10 09:49:30Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:9e52c641-9d71-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled

EXIF Metadata provided by EXIF.tools