Hunter Engineering 5414 T Brochure

: Hunter-Engineering Hunter-Engineering-5414-T-Brochure-779977 hunter-engineering-5414-t-brochure-779977 hunter-engineering pdf

Open the PDF directly: View PDF .
Page Count: 16

Download
Open PDF In Browser	View PDF

Alignment Accessories

CodeLink

®

The New Last Step in Alignment Service
CodeLink directly “links” the vehicle OBD-II
to the aligner to reset steering system sensors,
as required by the manufacturer.
®

2

20-2150-1
CodeLink with
XF2 Pod Kit*
Data link from
WinAlign to
the vehicle
OBD-II (J1962)
connector. Order
this kit if you
want wireless
capability and do
not currently own an XF2 Pod Kit. Includes CodeLink
device, XF2 Pod Kit, and J1962 cable. Also includes
a burndy cable that may be used to connect the
CodeLink device to the alignment console.

Steering system reset typically involves resetting the
steering angle sensor, but on some vehicles, torque
angle, yaw rate and other steering-related sensors are
also reset.
CodeLink handles them all with a single, integrated
procedure.

20-2151-1
CodeLink
without XF2
Pod Kit*
Data link from
WinAlign to the
vehicle OBD-II
(J1962) connector.
Order this kit if
you currently own
an XF2 Pod Kit or you do not want wireless capability.
Includes CodeLink device and J1962 cable. Also includes
a burndy cable that may be used to connect the CodeLink
device to the alignment console.

20-2333-1
BMW 20-Pin
Cable
CodeLink
connection cable
required for 2001
and older BMW
models with
Dynamic Stability
Control (DSC).

Which OEMs require resets?

Audi • BMW • Chevy • Ford •
Hyundai • Infiniti • Lexus •
Mazda • Mercury • MINI •
Nissan • Pontiac • Saturn • Scion •
Toyota • Volkswagen

*Requires WinAlign version 11.0 or greater software. CodeLink is not compatible with PA consoles.

Remote Indicators
Hunter Remote Indicators
Speed Alignment Service
Hunter Remote Indicators provide the operator complete control
of the alignment system while making adjustments to the vehicle.

4	 Displays measurements
4	 Functions as a remote control
4	 Eliminates need for a separate remote control under the vehicle
4	 Allows the technician to perform rolling compensation
	

when the console is out of view

20-2880-1 Cordless** Plus Remote Indicator Easily
Records Tire and Suspension Measurements
Hunter’s Plus Remote Indicator refines your alignment service by
measuring tire temperature and frame angle and letting you enter
in values for tire pressure, tread depth and ride height without
repeated trips back to the console.
Includes: 	20-2056-1 	Hanger kit with remote hanger recharge
	
38-944-3 	 30-foot cable
	27-13-2 	Tire temperature probe
For use with WA Series and Series 811 aligners using WinAlign
alignment software version 9.0 and greater.

®

20-2881-1 Cordless** Icon Remote Indicator
Cordless Icon Remote Indicator is compatible with WA Series,
Series 811, Series 611 with USB support and PA100 aligners.
Includes: 	20-2056-1 	Hanger kit with remote hanger recharge
	
38-944-3 	 30-foot cable
For use with WinAlign alignment software version 1.5.1 and greater.

20-2882-1 Icon Remote Indicator
Icon Remote Indicator is compatible with WA Series,
Series 111/211/311/411/511/611/811 and PA100 aligners.
Includes: 	 20-2055-1 	 Hanger kit
	
38-944-3 	 30-foot cable
For use with WinAlign alignment software version 1.5.1 and greater.

**Cordless communication requires 20-2072-1 XF2 Pod Kit.

3

QuickGrip Adaptor Accessories
™

20-2856-1
Roll-Around Storage
Cart Kit
Provides convenient
access to adaptors when
you need them and
convenient storage when
you don’t. (kit includes
two carts)
Single Cart (20-3082-1)

20-2528-1
Storage
Bracket Kit
Provides storage for
adaptors on console,
lift, HawkEye Elite
sensor column, or
Roll-Around Storage
Cart Kit (11-1509-2). Standard
with HawkEye Elite sensors.
™

Kit 11-1509-2
includes four
brackets

20-2563-1
Protective Ring
Replacement Kit
Attaches to adaptor
base to protect
rims. Standard
with HawkEye Elite
sensors.

Kit 20-2563-1
includes four
rings

Adjustable Tire
Hook Kit
Covers clamping
range of 20" to
36" tires (outside
diameter).
20-2521-1
8 hooks to cover
both axles.
20-2639-1
4 hooks to handle very
limited clearance applications
encountered on the front axles
of modified and some European
model vehicles.

4

Requires two molded
target hangers (11-1509-2)
(sold separately)

20-2819-1
Drivers-side
Accessories
Storage Upgrade
for 20-2552-1 Cart
Provides additional
storage for Quick
Check accessory
bundle.
20-2792-1 Drivers-side
Accessories Storage Upgrade
for 20-2552-1 Cart

20-2621-1
Medium-Duty
Truck Spacer Kit
This kit contains
4 spacers for
medium-duty
trucks. These
spacers may be
used with kit
20-2640-1.
20-2638-1 Complete Medium-Duty Truck Kit
Contains 20-2621-1 and 20-2640-1.
20-2640-1 Medium-Duty Truck Tire Hook Kit
Set of 8 two-position adjustable black tire hooks.

Wheel-Off Adjustment Kits
Make fast, accurate alignment
adjustments... with the wheel removed!
Wheel-Off Adjustment Kits allow the installation of alignment
targets or sensors on hubs to ease adjustments with the wheel
out of the way.
4	 Creates easy access to alignment points
4	 Applicable on more than 30% of vehicles in production
4	 Kits cover all Hunter target and sensor designs

Kit 20-1978-1 includes
two adaptors

20-2664-1 TD Target Wheel-Off
Adjustment Kit
Kit includes 20-1978-1 and 20-2577-1.

Kit 20-1979-1
includes two
adaptors

20-1979-1 Wheel-Off Adjustment Kit
Magnetic adaptors attach to the rotor once the
wheel is removed. Requires WinAlign software
version 9.0 or greater and 20-1978-1 Wheel-Off
Adjustment Kit.

20-1978-1 Wheel-Off Adaptor Kit
Adaptors mount directly to the hub bolts once the wheel is
removed. Requires WinAlign software version 9.0 or greater.

Kit 20-2577-1 includes
two adaptors

20-2577-1 Self-Centering Adaptors for TD Targets
Adaptors required to perform wheel-off adjustments using TD
Targets. Also requires 20-1978-1 Wheel-Off Adjustment Kit.
Four Adaptor Kit (20-2513-1).

5

Ride Height Measurement
Live Ride Height Measurement
and Adjustment System for HE421,
HS421, HS401 and DSP600 Sensors
Ride Height can change over time as a vehicle ages.
These changes in ride height can prevent proper
alignment.

4	 Hunter Live Ride Height Adjustment allows the
technician to easily measure, adjust, jounce and
confirm ride height.

4	 Accurately adjust ride height in just one trip around
the car.

4	Make ride height adjustments in half the time.
4	 Integrate with WinAlign Tuner™ software to better
service modified vehicles.

4	 Use the Suspension Body Dimension Audit to
determine alignability or need for collision repairs.
Suspension Body Dimension Audit Option
The patented Suspension Body Dimension Audit
(SBDA) option provides a quick audit to determine
if the vehicle is alignable and identifies the potential
need for body shop procedures by measuring ride
height, body angle, body wheel offset, body wheel
setback and body roll.
Requires 20-2050-1 Live Ride Height Measurement
Kit and WinAlign® software version 9.0 or greater.

20-2112-1 Live Ride Height Adhesive Strips Kit
For use with HS401 and DSP600 Live Ride Height
Targets (100 Adhesive Strips).

6

20-2050-1 Live Ride Height Measurement Kit
Includes four targets used for measuring ride height.
Requires a WA Series or Series 811 console with
WinAlign software version 9.0 or greater and HE421,
HS401 or DSP600 sensors.

Wheel Adaptors & Accessories

Self-Centering Wheel Adaptors

For Hunter HS401, DSP700, DSP600 and DSP500 Wheel Alignment Sensors
Extended range fits 10" to 24.5" (254 mm to 622 mm) rims
20-2375-1 Dual-Purpose Sensor
and Adaptor Mounting Kit
Set of four brackets that may be mounted to HS401
columns, alignment consoles or in a horizontal
position for use on RX lifts. The brackets will hold
self-centering wheel adaptors and sensors/targets
(not suitable for cordless sensors). Compatible
with 175‑321-1 and 175-325-1 Self-Centering
Adaptors.
175-325-1 Self-Centering Wheel Adaptor
Wheel adaptor for DSP600 Hexagonal or HS401
High-Definition Alignment Targets.
175-321-1 Self-Centering Wheel Adaptor
Wheel adaptor for DSP700 and DSP500
Alignment Sensors.
20-1789-1 Tire Clamp Adaptor
Clamps wheel adaptors on tires with an outside dimension of
21” (533 mm) to 40” (1016 mm). Ideal for rims without rim lips or
when space between tire and rim is limited. Grips onto tire treads
and protects alloy wheels from damage. Required for use with PAX
System Wheels. Compatible with 175-321-1 and 175-325-1
Self-Centering Adaptors.

20-1558-1 Tire
Clamp Adaptor
Compatible with
175-200-1,
175-285-1,
175-304-1 and
175-305-1 SelfCentering Adaptors.
Grips tread of tires
21” to 40” outside
diameter.

20-1559-1 Upgrade Kit
for Tire Clamp Adaptor
Kit 20-1108-1
Replaces the current tire
hooks on kit 20-1108-1,
increasing maximum tire
range from 28” to 40”.
Compatible with
175-200-1, 175-285-1,
175-304-1 and 175-305-1
Self-Centering Adaptors.

7

20-1792-1 Wheel Adaptor Extensions
Increase maximum rim range of self-centering
adaptors from 24.5" (622mm) to 28" (711mm).
Compatible with 175-321-1 and 175-325-1
Self-Centering Adaptors.

Kit 20-1792-1 contains 16 pieces, four for each adaptor.

1
175-214-1

BMW Quick Clamp Adaptor

Hunter Quick Clamp Adaptor approved by BMW. BMW special adaptors
with large tire hooks and 100 mm pins. For use with all HawkEye HS401
and DSP sensors. (Replacement only for older installations. For new
installations, use 175-348-1.)

175-215-1

Mercedes-Benz Clamp
Adaptor

Hunter Quick Clamp Adaptor approved by Mercedes-Benz. MercedesBenz special adaptors with large tire hooks and 100 mm pins. For use
with all HawkEye HS401 and DSP sensors. (Replacement only for older
installations. For new installations, use 175-349-1.)

8

20-1329-1

Mercedes-Benz
100 mm Pin Kit

Use with Mercedes-Benz Clamp Adaptors 175-349-1 and 175-215-1
(one kit covers one adaptor).

20-1857-1

Long Hooks for Special
Adaptors

Long hooks for BMW and Mercedes-Benz Clamp Adaptors. May be used
with 175-214-1 and 175-215-1 Clamp Adaptors. Standard on 175-348-1
BMW Quick Clamp Adaptors.

20-1097-1

Wheel Adaptor Extensions

Increases maximum wheel diameter on self-centering adaptors by 2 1/2
inches. Compatible with 175-200-1, 175-285-1, 175-304-1 and 175-305-1
Self-Centering Adaptors.

20-551-1

Spade Sleeve Kit

Includes eight Rim Stud Sleeves (106-70-2) and eight Storage Plug
Assemblies (one kit covers two adaptors).

20-1688-1

Additional Rim Stud
Retainers

For 16” - 20” wheel adaptors. Includes eight rim stud retainers (one kit
covers two adaptors).

20-1578-1

Mag Wheel Short Kit

Includes four Mag Assembly Adaptors (175-63-3) (one kit covers one
adaptor).

20-550-1

Rubber Pad Sleeve Kit

Includes four each of the following: 175-37-3 Mag Assembly Adaptor and
175-63-3 Mag Assembly Adaptor (one kit covers two adaptors).

20-1898-1 Rim
Stud Retainer Kit
Rim Stud Retainers
for mounting
adaptors. Compatible
with all current production slip-on spade sleeves.
Standard and compatible with 175-321-1 and 175-3251 Self-Centering Adaptors. Kit includes eight retainers
covering two adaptors.
20-1522-1 Spade Sleeve Kit
Kit includes eight Rim Guard Tire
Sleeves (106-118-2), covering
two adaptors.

20-823-1
Rim Stud Extension Kit
Kit includes eight Rim Stud
Extensions (134-81-1),
covering two adaptors.
20-2916-1
Sensor Shaft Extension
Kit includes two sensor
shaft extentions.
20-831-1 Spade Sleeve Kit
Kit includes eight Rim Stud
Sleeves (106-70-2), covering
two adaptors. Standard with
175-34-1 and 175-325-1 SelfCentering Adaptors.

175-348-1 BMW
Quick Clamp
Adaptor
Hunter Quick Clamp
Adaptor approved by
BMW. BMW special
adaptors with large
tire hooks and 120
mm pins. For use
with all HawkEye
HS401 and DSP
sensors.

175-349-1
Mercedes-Benz
Clamp Adaptor
Hunter Quick Clamp
Adaptor approved
by Mercedes-Benz.
Mercedes-Benz
special adaptors with
large tire hooks and
100 mm pins. For
use with all HawkEye
HS401 and DSP sensors.

20-1867-1 BMW
120 mm Pin Kit
120 mm pins are
standard on
175-348-1 Quick
Clamp Adaptors.
May also be used with
175-214-1
Quick Clamp
Adaptors for some
specialty wheels with
deeper offsets. One kit covers four adaptors.

20-1842-1
Adaptor Upgrade
Kit for HS401,
HS400, DSP600
and DSP400
Sensors
For mounting to
sensor columns.
Includes four 175325-1 Self-Centering
Adaptors (clamping range 10” - 24.5”), four storage brackets
and mounting hardware.

20-1841-1 Adaptor Upgrade Kit for HS401,
HS400, DSP600 and DSP400 Sensors
For mounting to aligner cabinet or wall. Includes
four 175-325-1 Self-Centering Adaptors (clamping
range 10” - 24.5”), four storage brackets and
20-1822-1 Instrument Support Adaptor Plate Kit.

9

20-1770-1

Instrument Support Kit

Set of four brackets mount to DSP600 or DSP400 columns. The brackets will
hold self-centering wheel adaptors and sensors/targets (not suitable for cordless
sensors). Compatible with 175-321-1 and 175-325-1 Self-Centering Adaptors.

20-1762-1

Instrument Support
Adaptor Plate Kit

Set of four adaptor plates allow DSP500 hangers to be mounted to alignment
cabinets that only have mounting holes for older, horseshoe-style sensor
supports. Does not include DSP500 Sensor hangers.

20-1427-1

Instrument Support Kit

Set of four brackets mount to two-post and four-post Hunter lift rack columns.
The brackets will hold self-centering wheel adaptors and sensors/targets (not
suitable for cordless sensors). Compatible with 175-200-1, 175-285-1,
175-304-1 and 175-305-1 Self-Centering Adaptors.

20-1822-1

Instrument Support
Adaptor Plate Kit

Set of four adaptor plates allow 20-1770-1 Bracket Kit to be mounted to walls
or alignment cabinets. Does not include 20-1770-1 Kit.

20-1446-1

Safety Hook Assembly

Set of four, compatible with 39-22-1, 39-25-1, and 39-44-1 safety cables.
Includes four Safety Cable Hook Assemblies (216-58-1).

20-2193-1

Instrument Support Kit

Set of four adaptor plates allow HS401 hangers to be mounted to walls or
alignment cabinets. Does not include sensor hangers.

Sensor Accessories

10

20-1864-1

AC Conversion Kit

Allows the Five Position Battery Charger (20-1832-1) to be used as
a free-standing charger without using the aligner power supply.

20-1488-1

Auxiliary DSP Sensor
Charging Station

Provides a second charging station where cordless sensors and HS401,
DSP600 or DSP400 Sensors are being used with the same console.

194-18-2

Cordless Sensor Battery

For DSP200 and DSP300 Sensors.

194-23-2

Cordless Sensor Battery

For DSP500 Sensors, 30-418-1 Cordless Plus Remote Indicator and
30-421-1 Icon Remote Cordless Remote Indicator.

20-1899-1 Instrument
Support Kit
For use with Mercedes-Benz
and BMW Quick Clamp
Adaptors and DSP500
Sensors.

20-1900-1 Instrument
Support Kit
For use with Mercedes-Benz and
BMW Quick Clamp Adaptors and
HawkEye HS401 and DSP600
Sensors.

20-2187-1 Instrument
Support Plate Kit
Set of four brackets mount
to HS401 columns. The
brackets will hold selfcentering wheel adaptors
and sensors/targets (not suitable for cordless
sensors). Compatible with 175-321-1 and 175-325-1
Self-Centering Adaptors.

20-1832-1 Five-Position
Battery Charger
Provides a charging station for up
to five DSP500 Sensor batteries.
20-2760-1 Six-Position
Battery Charger
Provides a charging station for up
to six DSP700 Sensor batteries.

Alignment Tools, Kits & Accessories
Drawer Organizer Kit
20-2199-1 Drawer
Organizer Kit
Provides dividers and
tool and part organizers
for the drawers on
WA445, WA444,
WA245, WA244, R811P
and R611P consoles.
Does not include
20-1561-3 Alignment
Tool Kit or 20-1575-3
Shim/Bushing/CAM
Assortment.
* Drawer Organizer Kit
requires a four-week lead time.

Shim/Bushing/CAM Assortment
20-1575-3 Shim/Bushing/CAM
Assortment
This kit contains many of the more
commonly used shim, bushing and
CAM correction kits.
Kit includes:
RP5-42-778	 1997-2003 F150 DEG CAM BOLT 2-1/2 (2 EA.)
RP5-42-951	 CAST/CAMB BUSHING 1/4 (1 EA.)
RP5-42-952	 CAST/CAMB BUSHING 1/2 (1 EA.)
RP5-42-953	 CAST/CAMB BUSHING 3/4 (1 EA.)
RP5-42-954	 CAST/CAMB BUSHING 1 (1 EA.)
RP5-42-955	 CAST/CAMB BUSHING 1-1/4 (1 EA.)
RP5-42-956	 CAST/CAMB BUSHING 1-1/2 (1 EA.)
RP5-42-957	 CAST/CAMB BUSHING 1-3/4 (1 EA.)
RP5-42-958	 CAST/CAMB BUSHING 2 (1 EA.)
RP5-42-959	 CAST/CAMB BUSHING 2-1/4 (1 EA.)
RP5-42-960	 CAST/CAMB BUSHING 2-1/2 (1 EA.)
RP5-42-961	 CAST/CAMB BUSHING 2-3/4 (1 EA.)
RP5-44-5001	 4WD BUSHING (1 EA.)
RP5-44-5002	 4WD BUSHING (1 EA.)
RP5-44-5003	 4WD BUSHING (1 EA.)
RP5-44-5004	 4WD BUSHING (1 EA.)
RP5-44-5005	 4WD BUSHING (1 EA.)
RP5-44-5006	 4WD BUSHING (1 EA.)
RP5-44-5007	 4WD BUSHING (1 EA.)

RP5-44-5008	 4WD BUSHING (1 EA.)
RP5-44-5009	 4WD BUSHING (1 EA.)
RP5-44-5010	 4WD BUSHING (1 EA.)
RP5-44-768	 SHIM EXPLORER/RANGER (1 EA.)
RP5-44-786	 SHIM 2003 EXPEDITION (1 EA.)
RP5-44-789	 SHIM 2004 F150 (1 EA.)
RP5-44-792	 SHIM 2003 DODGE 1/2-TN. TRUCKS (1 EA.)
RP5-41-147	 KIT-MAGNA CAM 12MM (1 EA.)
RP5-41-157	 HEAVY-DUTY 9/16-IN. MAGNA CAM (1 EA.)
RP5-41-158	 KIT-MAGNA CAM 14MM (1 EA.)
RP5-41-160	 KIT-MAGNA CAM 16MM (1 EA.)
RP5-46-2100	 UNIVERSAL BLUE SHIM [0 – 1-1/2] (2 EA.)
RP5-46-2200	 UNIVERSAL WHITE SHIM [0 – 1-1/2] (2 EA.)
RP5-46-2300	 UNIVERSAL GRAY SHIM [0 – 1-1/2] (2 EA.)
RP5-46-2400	 UNIVERSAL BURG. SHIM [0 – 1-1/2] (2 EA.)
RP5-46-1121	 SHIM-1/4 DEGREE GREEN (1 EA.)
RP5-46-1122	 SHIM-1/2 DEGREE GREEN (1 EA.)
RP5-46-1123	 SHIM-3/4 DEGREE GREEN (1 EA.)
RP5-46-1124	 SHIM-1 DEGREE GREEN (1 EA.)

11

Alignment Tool Kit
20-2198-3 Alignment Tool Kit
This kit contains many of the more commonly used
correction tools. Kit includes:

RP5-88-343

RP5-88-343 	Full contact/dual angle rear shim tab cutting
tool works equally well on both the original
design or the new SYSTEM 2000 universal 	
design

RP5-88-1110

RP5-88-1110 	 3/8-in. drive bolt/nut remover
RP5-88-7095 	Tie rod adjuster for compact vehicles 	
(not shown)
RP5-88-7096 	 Tie rod adjuster for full-size vehicles
	
(not shown)
RP5-88-7099

RP5-88-7097 	 Lt. truck tie rod tool for 1/2-in. drive
	
(not shown)

RP5-88-7101

RP5-88-7098 	 Toe adjuster for Ford Super-Duty		
	
(not shown)
RP5-88-7099 	 Tie rod adjusting tool
RP5-88-7101 	Tie rod adjuster for Chrysler “LH” models
RP5-88-7102 	Tie rod stabilizer for Chrysler “LH” models
RP5-88-7102

RP5-88-7103

RP5-88-7201

RP5-88-7103 	 Tie rod wrench for Chrysler “LH”
RP5-88-7201 	 Sleeve adjusting tool
RP5-88-7203 	 Sleeve outer wrench for Chrysler “LH”
RP5-88-7301 	 Universal Inner Tie Rod Socket		
	
(not shown)

RP5-88-7203

RP5-88-7491

RP5-88-7491 	 GM upper control arm knock out tool

RP5-88-8923

RP5-88-8923 	 GM “W” body rear toe adjuster
RP5-88-8925 	 Camaro/Firebird (1994 & newer) 		
	
caster/camber adjuster (not shown)
RP5-88-8927 	 Camber/caster adjusting tool		
	
(not shown)
RP5-88-9200 	 Taurus/Sable sedan rear toe adjuster

RP5-88-9200

RP5-88-9480

RP5-88-9480 	 Magnetic camber change gauge

Software Upgrades & Services
20-1970-1 Digital-PHOTO
Provides digital inspection and adjustment photos for
new or existing WA100 or 811 consoles with WinAlign
8.X or higher. Standard with WA400 and WA200
consoles. More than 4,000 vehicle-specific digital
photos improve productivity by quickly identifying
adjustment and inspection points.

12

20-1971-1 Combination Digital-PHOTO/VIDEO
Provides digital inspection and adjustment photos for new or existing
WA100 or 811 consoles with WinAlign 8.X or higher. Standard with
WA400 and WA200 consoles. More than 400 live videos cover
vehicle adjustments, inspection of components, use of special
tools, installation of after-market correction kits and equipment
operation for over 90% of cars and light trucks sold in the U.S.

Console Accessories & System Upgrades

20-2900-1 Bar Code
Reader Kit for WA370/470,
WA380/480
Includes a 2D Bar Code Reader.

20-2389-1 Bar Code Reader
Storage Tray for WA330/430,
WA340/440
Provides a storage tray for a bar
code reader cradle and an alternative
mounting for the bar code reader itself.
(Bar Code Reader not included)

20-2538-1 Bar Code
Reader Kit for WA330/430,
WA340/440
Includes a 2D Bar Code Reader
and shelf.

69-1025-2 Equipment Cover
For WA380/480 large mobile cabinets with conventional passenger-car
sensors/targets or HD truck cabinets.
69-1187-2 Equipment Cover
For WA370/470 small mobile cabinets without hangers for sensors or targets.
213-47-2	

Convex Mirror

WA15-S	

Brake Pedal Depressor

28-75-1	

Steering Wheel Holder

Wheel Adaptor Storage Cart
20-1922-1 Wheel Adaptor Storage Cart
Hunter’s Wheel Adaptor Storage Cart provides convenient access to
alignment instruments when you need them and convenient storage
when you don’t. Storage Cart is compatible with hexagonal and highdefinition targets and conventional sensors.

Storage Cart shown with
HawkEye HS401 High-Definition
Targets and adaptors.

13

Quick Check

™

The inspection process that locates
repair orders in under three minutes

20-2813-1 CodeLink*
Retrieves emission codes. Wirelessly transfers
important vehicle information to console.

20-2782-1 Tire Tread Depth*
Quick and easy tire wear check. Conditions transmitted
to console automatically.

*Requires WinAlign 14.1 software in Quick Check mode.
®

14

™

20-2781-3 Battery Health*
Tests battery to OEM specs. Sends results to console
wirelessly in 10 seconds.

HunterNet and WinAlign Tuner
™

™

Enhance your point-of-sale performance
HunterNet (HunterNetwork.com) provides front-shop
personnel with quick, convenient access to a vast
collection of vehicle-specific undercar information
to help explain and sell service.
™

4 	Eliminate confusing technical conversations with

easy-to-understand videos, animations and images
4 	Help your customers make informed decisions
4 	Drive repair authorizations to a new level
4 	Supplement other counter merchandising tools
4 	Make more informed pricing estimates
4 	Simplify training of service writers

Hunter Networking Accessories

For ordering information, contact your local
Hunter Service Representative.

20-2195-1 Wireless Network Kit
Connects WA100 or 811 consoles to a shop’s existing
802.11 a/b/g wireless network.

Complimentary HunterNet 3-year subscription included
with HawkEye Elite and HawkEye alignment systems.
Complimentary HunterNet 1-year subscription included
with current-year WinAlign specification updates.

Standard on WA400 and WA200 consoles.

Subscription valid for single-user only. Additional
subscriptions required for multiple, simultaneous access.

20-2011-1 Bump Steer Winch Kit
Bump steer winch and laser scale enables the
technician to collect bump steer measurements.
Requires WinAlign software version 8.1 or higher.

20-2004-1 WinAlign Tuner Kit
WinAlign Tuner software, hardware and procedures enable
your shop to align modified vehicles and increase your
shop’s profitability.
WinAlign Tuner software is an optional feature of WinAlign
software. Additional hardware is required, see Form 5118-T
for more information.
®

WinAlign Tuner is standard with WA400, WA200 and 811 Plus consoles.

WinAlign Tuner features include:
Enhanced Tools and Kits
Integrated Bump Steer Measurement System
Electronic Vehicle Ride Height Measurement
™

20-2005-1 WinAlign Plus Kit
Provides PHOTO/VIDEO on DVD and WinAlign
Tuner for new or existing WA300, WA100 and
811 consoles with WinAlign 8.1 or higher.
These features are standard on WA400 and WA200 consoles.

15

Alternative Mounting Options

HS401 Sensors

20-2479-1 CM Sensor Mounting Kit for
Compact Cabinets

Replaces the existing cabinet base with a wider,
more stable base for the HawkEye HS401CM
sensors. This kit supports WA233, WA234,
WA131, WA132, and S811 cabinets.

20-2313-1 Alternative Mounting Base for Pronto and PA121

Floor-mounted base holds a Pronto or PA121 console and wheel adaptors with targets.

20-2313-1

20-2321-1 HS401CM to Stand-Alone Mount Conversion Kit (Black)
20-2320-1 HS401CM to Stand-Alone Mount Conversion Kit (Red)

Two Stand-Alone Mount (SAM) conversion kits are available to convert
a HS401CM with a movable camera boom from cabinet-mount to a floor
stand-alone mount.

For detailed information on models, cabinets and
accessories, contact your Hunter representative.
Hunter, ShopResults.NET, WebSpecs, HawkEye, QuickGrip, WinAlign
and WinAlign Tuner are trademarks of Hunter Engineering Company.
0615NAP2M.1.36
Copyright © 2015, Hunter Engineering Company

Form 5414-T, 06/15
Supersedes 5414-T, 02/14



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 2015:06:25 12:48:58-05:00
Creator                         : Adobe InDesign CC 2014 (Macintosh)
Modify Date                     : 2015:07:10 09:18:54-05:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Instance ID                     : uuid:644d66e6-a875-4458-b721-ef85d65f0754
Original Document ID            : adobe:docid:indd:f2a6039f-24de-11de-9367-a81b10febe1d
Document ID                     : xmp.id:61b80298-892f-4136-8c40-da8678084bbc
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:9c630cff-bf9a-4508-91cc-d2a744b4349f
Derived From Document ID        : xmp.did:407EE96C3E2068118083CF074345E50C
Derived From Original Document ID: adobe:docid:indd:f2a6039f-24de-11de-9367-a81b10febe1d
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Macintosh)
History Changed                 : /
History When                    : 2015:06:25 12:48:58-05:00
Metadata Date                   : 2015:07:10 09:18:54-05:00
Creator Tool                    : Adobe InDesign CC 2014 (Macintosh)
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Slug Checksum                   : 2095693155
Slug Post Script Name           : Helvetica-Condensed-Light
Slug Foundry                    : Adobe Systems
Slug Version                    : 001.001
Slug Outline File Size          : 28745
Slug Family                     : Helvetica
Slug Font Sense 12 Checksum     : 2095693155
Slug Font Kind                  : PostScript
Slug Kerning Checksum           : 54375
Page Count                      : 16

EXIF Metadata provided by EXIF.tools