Hunter WRCTX Wireless Rain-Clik Rain Sensors User Manual LIT 348 Wireless Rain Clik Brochure
Hunter Industries Inc Wireless Rain-Clik Rain Sensors LIT 348 Wireless Rain Clik Brochure
Hunter >
Contents
- 1. WRC manual
- 2. linx tx
- 3. wrc brochure
wrc brochure
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . .
If the thought of running wires from a
controller has kept you from adding rain
sensors to your systems, now there’s a
hassle-free alternative. The Hunter Wireless
Rain-Clik™ attaches quickly and easily and
delivers a dependable way to ensure that your
landscape isn’t getting water when it doesn’t
need it. Simply install the receiver unit next to
your irrigation controller, then install the
transmitter anywhere that the device can
receive representative rainfall. No ladders
needed to attach to a high outcropping on a
building, no messy wires to hide out of view.
What could be more simple? What also sets a
Hunter Rain-Clik™ apart are features no other
rain-sensing device offers. The unique Quick
Response™ feature allows the product to
shut off immediately when it starts to rain.
And, unlike its competition, Hunter’s sophis-
ticated sensing mechanism cannot be fouled
by debris, giving the Wireless Rain-Clik™ the
most highly accurate operation.
Hassle-free, Wire-free Easy Installation
Simple to add on to a new or existing installation
Hunter’s Unique Quick Response™ Feature
No need for water to accumulate for shutoff
Modular Mounting Options
Variety of choices depending on the job site; gutter or wall mounts
Set a Maximum Dry-Out Period
Adjust the irrigation re-start to account for varying amounts
of rain
Operates up to 300' from the Receiver Unit
Typical wired system limitations vanish
Maintenance-free Patented Sensing Mechanism
No callbacks – just set it and forget it
Built-in Bypass Switch on Receiver Panel
Adds fl exibility to the system
Retrofi t with Ease
Installs on any system in minutes, no stringing of wiring
Wireless Rain-Clik™ Rain Sensors
Wireless
Rain-Clik™
The First
Reliable
Wireless
Rain Sensor
FEATURES & BENEFITS
I
Hunter Industries Incorporated • The Irrigation Innovators
1940 Diamond Street • San Marcos, California 92069 • TEL: (1) 760-744-5240 • FAX: (1) 760-744-7461 © 2001 Hunter Industries Incorporated
www.HunterIndustries.com P/N 700906 10/01
A Variety of Mounting Options
Whether you offer a rain-sensing device as an upgrade to your installations
or you already install one as a standard piece of equipment, wouldn’t you
like to have options on where you must install it? The usual place to install a
rain-sensing device has been on a fl at vertical surface, such as a wall or fence.
But, with the Hunter Wireless Rain-Clik™, you can also mount the unit on
a rain gutter. In addition, Hunter offers an 8" telescoping extension rod that
brings the unit out from under a roof eave or other obstruction.
Instant Shut Off When it Rains
There are a lot of rain-sensing devices on the market
today, but all of them shut off an irrigation system only
when a pre-set level of accumulated water is reached.
That means that even after it has started raining, a system
will continue to operate, an action that can give the
impression water is being wasted (not the image that a
municipality wants to give its populous as they pass by
parks, roadways and other city-owned lands). Only the
Hunter Rain-Clik™ products, with their unique Quick Response™ feature,
allow an irrigation system to shut off immediately when it starts to rain.
Models
Wireless Rain-Clik
Dimensions
3.25" diameter x 4" high
Operating Specifi cations
• Wiring: normally closed
or normally open
• Time to turn off irrigation
system: 2-5 minutes for the
Quick Response™ feature
• Time to reset the Quick
Response™ unit: 4 hours
maximum under dry sunny
conditions
• Time to reset: 3 days maximum
under dry sunny conditions for
the total rainfall compensation
unit
• Operating temperature:
32˚F -130˚F (0˚C - 54˚C)
• Vent ring allows for adjustment
of reset delay
• UV colorfast and stable
• UL listed, FCC/DOC approved,
Australian Compliance, CUL
(CSA)
• Rain sensor transmitting range:
up to 300 ft. line of sight
Electrical Specifi cations
• Receiver Power: 22-28 VAC/
VDC, 100 mA (from timer
transformer)
• Receiver includes built-in
bypass switch, no extra switch
required
• Works with all standard
controllers
Compact Design
No ladder required
to install on
fences, decks, etc.
Gutter Clip Wall Bracket
8" Telescoping Extension Rod
It’s as easy as 1-2-3: Install bracket in easy to access location like a fence;
Snap sensor in place; test system. No wires to string. Installs in minutes!
EXAMPLE: WIRELESS RAIN-CLIK
MODEL
WIRELESS RAIN-CLIK
PRODUCT EXPLANATION
LIT-348.PDF