Husqvarna 020524 00 3 Users Manual IPL, HUSQVARNA, PW3300, 967144501, 2012 08, PRESSURE WASHER
300 PSI to the manual 210e373d-68f4-4b48-b2f5-7fbf37beee9d
2015-01-24
: Husqvarna Husqvarna-020524-00-3-Users-Manual-318049 husqvarna-020524-00-3-users-manual-318049 husqvarna pdf
Open the PDF directly: View PDF .
Page Count: 8
Download | ![]() |
Open PDF In Browser | View PDF |
Illustrated Parts List Pressure Washer / Lavadora de Presión No Re t f pr or od uc tio n Pressure Washer This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) Standard PW101 (Testing and Rating Performance of Pressure Washers). Questions? Help is just a moment away! Preguntas? La ayuda es justa un momento lejos! Call: Pressure Washer Helpline Llame: Línea Directa del Lavadora a Presión - 1-877-224-0458 M-F 8-5 CT Model / Modelo Mfg. No. Descri ption / Descripción 020524-00 3,300 PSI Husqvarna Manual Part No. 317992 Revision A Rev. Date: 5/3/2012 Table Of Content s PR ODUCT COMPONENTS PAGES Main Unit .............................................................................................................................................................. Pump .................................................................................................................................................................... ...................................... Inside Back Cover No Re t f pr or od uc tio n Torque Specification Chart ............................... 4 7 Main Unit NOTE: Unless noted otherwise, use the standard hardware torque specification chart. PART NO. 1 313250GS 2 313252GS 3 316502GS 4 5 No REF. Re t f pr or od uc tio n 316335 DESCRIPTION REF. PART NO. DESCRIPTION 18 316500GS WIREFORM 19 194289GS KNOB GRIP, Handle 20 315530GS TANK, Chemical 316501GS GRIP, Handle 21 316723GS DECAL ----- SCREW, M5-0.8 x 20 22 316670GS CAP, Fuel BASE HANDLE 6 316712GS CAP, Plug 23 316778GS DECAL 7 ----- SCREW, M6 x 18 24 ----- SCREW, M6 x 25 HEX 8 316713GS MOUNT, Vibration 25 312005GS WASHER 9 ----- NUT, M6 1.0 26 209417GS VALVE, Fuel 10 316732GS T-KNOB 27 30809GS GROMMET 11 316508GS SCREW 28 315531GS TANK, Fuel 12 ----- WASHER, Flat M8 29 317025GS BARB, Hose 13 317106GS VALVE, Chemical Tank 30 316374GS WRAP, Hose 14 ----- NUT, M8 FLANGE 31 ----- SCREW, M6-1.0 x 16 15 316726GS DECAL 32 315017GS HOSE, Vapor (cut to fit) 16 ----- SCREW, M6 x 10 33 48031JGS CLAMP 17 316764GS CAP, Chemical Tank Footnotes * ( Engine parts are available through your Enine Manufacturer) The above parts group applies to the following Mfg. Nos.: 020524-00 - 3,300 PSI Hus qvarna Briggs & Stratton Power Products Group, LLC Copyright © 2012by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved 317992 4 Main Unit NOTE: Unless noted otherwise, use the standard hardware torque specification chart. PART NO. 34 791745 35 197798GS 36 5025210YP 37 ----- 38 No REF. Re t f pr or od uc tio n 316335 REF. PART NO. KIT, Fuel Hose (cut to fit) 51 316511GS TRAY-BATTERY DECAL 52 48031GGS CLAMP 53 A1040DGS HOSE-CHEMICAL WASHER, Flat 5/8" 54 ----- SCREW, 5/16-24 x 1 316406GS WHEEL 55 92479GS WASHER 39 317577GS AXLE 56 23139DGS KEY 40 316405GS WHEEL, Caster 57 208538GS DECAL 41 316504GS HEATSHIELD 58 316727GS DECAL 42 316505GS HEATSHIELD 59 B2384GS FILTER, Garden Hose 43 ----- SCREW, M8 - 1.25 x 20 60 316783GS CARBON CANISTER 44 95458GS FITTING 61 316503GS CLIP 45 21217GS MOUNT, Vibration 62 208324GS KIT, Nozzle 46 188301GS MUFFLER -- 198841GS NOZZLE, QC Black 47 191785GS BRACKET, Muffler -- 195983NGS NOZZLE, QC Red 48 ----- SCREW, M6 1.0 x 12 -- 195983QGS NOZZLE, QC Green 49 697815 GASKET -- 195983PGS NOZZLE, QC Yellow 50 317944GS PUMP -- 195983RGS NOZZLE, QC White Footnotes DESCRIPTION PIN, Hair DESCRIPTION * ( Engine parts are available through your Enine Manufacturer) The above parts group applies to the following Mfg. Nos.: 020524-00 - 3,300 PSI Hus qvarna Briggs & Stratton Power Products Group, LLC Copyright © 2012by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved 317992 5 Main Unit NOTE: Unless noted otherwise, use the standard hardware torque specification chart. PART NO. 63 316768GS 64 316157GS 65 316467GS 66 316333GS 67 No REF. Re t f pr or od uc tio n 316335 DESCRIPTION REF. PART NO. OIL BOTTLE 900 ----- ENGINE GUN -- 316782GS WRENCH, Allen (Parts Not Illustrated) -- 317898GS CABLE, Battery, Red (Parts Not Illustrated) MANUAL-OPERATOR -- 317943GS CABLE, Battery, Black (Parts Not Illustrated) 207785GS EXTENSION -- 601 40 00 76 KEY (Parts Not Illustrated) 68 ----- WASHER, FLAT 5/16 -- 317365GS OIL FUNNEL (Parts Not Illustrated) 69 195894GS FITTING -- 315546GS KIT, Battery Hardware (Parts Not Illustrated) 70 195893GS CONNECTOR -- 6039 PUMP SAVER (Optional Accessories) 71 208673GS VALVE, Thermal Reief HOSE 72 7028765YP SWITCH 73 312687GS BOOT, Rubber 74 208511GS JACK, Coaxial 75 316543GS BATTERY COVER, Battery 76 316729GS 77 B4177GS CHARGER, Battery 78 690795 CABLE ASSEMBLY 79 557067 BRACKET SOLENOID ASSEMBLY Footnotes DESCRIPTION * ( Engine parts are available through your Enine Manufacturer) The above parts group applies to the following Mfg. Nos.: 020524-00 - 3,300 PSI Hus qvarna Briggs & Stratton Power Products Group, LLC Copyright © 2012by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved 317992 6 Pump NOTE: Unless noted otherwise, use the standard hardware torque specification chart. No Re t f pr or od uc tio n 316158 REF. PART NO. 20 198851GS 25 204860GS 26 204859GS 34 198850GS CAP, Check Valve 50 198849GS DIPSTICK 66 198297GS SCREW 83 203034GS PLUG, Drain A 198736GS KIT, Unloader B 198843GS KIT, Check Valve C 198844GS KIT, Piston D 192914GS KIT, Chemical Injector E 198845GS KIT, Water Seal F 198848GS KIT, Support Ring G 198852GS KIT, Hardware H 198846GS KIT, Oil Seals J 198847GS KIT, O- Ring K 202902GS KIT, Unloader Seat Footnotes DESCRIPTION REF. PART NO. INJECTOR, Detergent L 202800GS KIT, Unloader JET -- B2384GS FILTER, Garden Hose (Parts Not Illustrated) -- 6039 PUMP SAVER (Optional Accessories) O-RING DESCRIPTION The above parts group applies to the following Mfg. Nos.: 020524-00 - 3,300 PSI Hus qvarna Briggs & Stratton Power Products Group, LLC Copyright © 2012by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved 317992 7 Hardware Identification & Torque Specifications Torque Specification Chart Torque Specification Chart FOR STANDARD METRIC MACHINE HARDWARE (Tolerance ± 20%) 5.6 8.8 Class 5.6 Class 8.8 5.88 13.44 26.4 44.64 5.2 7.7 15 26 42 64 89 126 169 217 320 435 590 759 988 M3 M4 M5 M6 M7 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M39 Class 10.9 in/lbs ft/lbs in/lbs ft/lbs Nm. in/lbs ft/lbs Nm. .56 1.28 2.50 4.3 7.1 10.5 21 36 58 88 121 171 230 295 435 590 800 1030 1340 13.44 1.28 19.2 30.72 2.90 43.44 60.96 5.75 5.97 7.3 9.9 10.3 12.1 16.5 16.9 25 17.7 24 35 50 48 61 83 86.2 101 136 132 147 210 200 202 287 275 290 405 390 390 559 530 708 497 375 733 995 1032 995 1350 1401 1349 1830 1902 1740 2360 2441 2249 3050 3163 1.80 4.10 8.10 14 23 34 67 117 185 285 390 550 745 960 1400 1900 2580 3310 4290 22.92 52.56 7.15 12.1 19.9 29 59 103 162 250 346 486 656 840 1239 1681 2278 2935 3798 2.15 4.95 9.7 16.5 27 40 81 140 220 340 470 660 890 1140 1680 2280 3090 3980 5150 Size Of Hardware 8-32 8-36 10-24 10-32 1/4-20 1/4-28 5/16-18 5/16-24 3/8-16 3/8-24 7/16-14 7/16-20 1/2-13 1/2-20 9/16-12 9/16-18 5/8-11 5/8-18 3/4-10 3/4-16 7/8-9 7/8-14 1-8 1-12 20 10 No The guides and ruler furnished below are designed to help you select the appropriate hardware. 0 40 30 50 60 80 70 90 Body Diameter Screw, M8- 1.25 x 25 1/4 1/2 3/4 1 Body Length (mm) Body Length (in) Screw, 1/2- 16 x 2 Nut, 1/2-16 0 Distance between threads (mm) Threads per inch Thread Diameter (mm) Body Diameter 1/4 1/2 3/4 2 1/4 1/2 3/4 3 1/4 1/2 3/4 SAE Grade 5 4 SAE Grade 8 in/lbs ft/lbs Nm. in/lbs ft/lbs Nm. in/lbs ft/lbs Nm. 19 20 27 31 66 76 11 12 20 23 30 35 50 55 65 75 90 100 160 180 140 155 220 240 2.1 2.3 3.1 3.5 7.6 8.6 15.0 16.3 27.2 31.3 40.8 47.6 68.0 74.8 88.4 102.0 122.4 136 217.6 244.8 190.4 210.8 299.2 326.4 30 31 43 49 8 10 17 19 30 35 50 55 75 90 110 120 150 180 260 300 400 440 580 640 3.4 3.5 4.9 5.5 10.9 13.6 23.1 25.8 40.8 47.6 68.0 74.8 102.0 122.4 149.6 163.2 204.0 244.8 353.6 408.0 544.0 598.4 788.8 870.4 41 43 60 68 12 14 25 29 45 50 70 80 110 120 150 170 220 240 386 420 600 660 900 1,000 4.6 4.9 6.8 7.7 16.3 19.0 34.0 34.0 61.2 68.0 95.2 108.8 149.6 163.2 204.0 231.2 299.2 326.4 525.0 571.2 816.0 897.6 1,244.0 1,360.0 100 Body Length Nut, M8 Thread Diameter (mm) Threads Inside per inch Diameter (in) SAE Grade 2 Class 12.9 Nm. Nm. No Marks Hardware Grade 12.9 Re t f pr or od uc tio in/lbs Size Of Hardware ft/lbs 10.9 n Property Class FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) NOTES 1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews. 2. Recommended seating torque values for locknuts: a. for prevailing torque locknuts - use 65% of grade 5 torques. b. for flange whizlock nuts and screws - use 135% of grade 5 torques. 3. Unless otherwise noted on assembly drawings, all torque values must meet this specification. Common Hardware Types Hex Head Capscrew Washer Standard Hardware Sizing When a washer or nut is identified as 1/2” (M8), this is the Nominal size , meaning the inside diameter is 1/2 inch (8mm metric thread diameter); if a second number is present it represents the threads per inch (distance between threads). When bolt or capscrew is identified as 1/2 - 16 x 2” (M8 - 1.25 x 50 ), this means the Nominal size , or body diameter is 1/2 inch (8mm metric thread diameter), the second number,16, represents the threads per inch, (1.25 thread diameter). The final number is the body length of the bolt or screw, 2 inches (50mm). Lockwasher Carriage Bolt Hex Nut Wrench & Fastener Size Guide 1/4” Bolt or Nut Wrench—7/16” M6 Bolt or Nut Wrench—10mm 5/16” Bolt or Nut Wrench—1/2” M8 Bolt or Nut Wrench—13mm 3/8” Bolt or Nut Wrench—9/16” M10 Bolt or Nut Wrench—17mm 7/16” Bolt or Nut Wrench (Bolt)—5/8” Wrench (Nut)—11/16” M12 Bolt or Nut Wrench—19mm 1/2” Bolt or Nut Wrench—3/4” M14 Bolt or Nut Wrench—22 mm n Re t f pr or od uc tio No Briggs & Stratton Power Products Group, LLC Copyright© 2012 Briggs & Stratton Power Products Group, LLC. All rights reserved. No part of this page can be produced or transmitted in any form by any means without the express written permission of Briggs & Stratton Power Products Group, LLC.
Source Exif Data:
File Type : AI File Type Extension : ai MIME Type : application/vnd.adobe.illustrator PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Modify Date : 2012:08:24 15:21:42-04:00 Create Date : 2012:08:24 14:18:34-04:00 Metadata Date : 2012:08:24 15:21:42-04:00 Creator Tool : Adobe Illustrator CS5 Format : application/pdf Title : IPL, HUSQVARNA, PW3300, 967144501, 2012-08, PRESSURE WASHER Creator : HUSQVARNA Description : HUSI2012_NAen_PW3300_967144501.PDF Document ID : uuid:6e2c91a1-be50-4b40-9a1c-e0bee3b21959 Instance ID : uuid:cb7b0cc5-fb69-449c-9b65-b525d5088d7d Producer : Adobe PDF library 9.90 Page Count : 8 For : Robert Ayers, Bounding Box : 36 27 582 745 Creator Version : 15 Container Version : 11 Page Layout : OneColumn Subject : HUSI2012_NAen_PW3300_967144501.PDF Author : HUSQVARNA Warning : [Minor] Ignored duplicate Info dictionary Image Height : 718 Image Width : 546 Image Size : 546x718 Megapixels : 0.392EXIF Metadata provided by EXIF.tools