Husqvarna 020524 00 3 Users Manual IPL, HUSQVARNA, PW3300, 967144501, 2012 08, PRESSURE WASHER
300 PSI to the manual 210e373d-68f4-4b48-b2f5-7fbf37beee9d
2015-01-24
: Husqvarna Husqvarna-020524-00-3-Users-Manual-318049 husqvarna-020524-00-3-users-manual-318049 husqvarna pdf
Open the PDF directly: View PDF 
.
Page Count: 8
Not
for
Reproduction
Illustrated Parts List
Pressure Washer / Lavadora de Presión
This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA)
Standard PW101 (Testing and Rating Performance of Pressure Washers).
Questions? Help is just a moment away!
Preguntas? La ayuda es justa un momento lejos!
Call: Pressure Washer Helpline
Llame: Línea Directa del Lavadora a Presión - 1-877-224-0458 M-F 8-5 CT
Pressure Washer
Revision A
Manual Part No.317992
Rev. Date: 5/3/2012
Mf
g
. No. Descri
p
tion / Descri
p
ción
Model
/
Modelo
020524-003,300 PSI Husqvarna
Not
for
Reproduction
Table Of Content s
Torque Specication Chart ............................... ...................................... Inside Back Cover
SEGAPSTNENOPMOC TCUDORP
Main Unit .............................................................................................................................................................. 4
Pump .................................................................................................................................................................... 7
Not
for
Reproduction
Main Unit
316335
NOTE: Unless noted otherwise,
use the standard hardware torque
specication chart.
PART NO. DESCRIPTIONREF.
Footnotes
PART NO. DESCRIPTIONREF.
BASE 1 313250GS
HANDLE 2 313252GS
GRIP, Handle 3 316502GS
GRIP, Handle 4 316501GS
SCREW, M5-0.8 x 20 5 -----
CAP, Plug 6 316712GS
SCREW, M6 x 18 7 -----
MOUNT, Vibration 8 316713GS
NUT, M6 1.0 9 -----
T-KNOB 10 316732GS
SCREW 11 316508GS
WASHER, Flat M8 12 -----
VALVE, Chemical Tank 13 317106GS
NUT, M8 FLANGE 14 -----
DECAL 15 316726GS
SCREW, M6 x 10 16 -----
CAP, Chemical Tank 17 316764GS
WIREFORM 18 316500GS
KNOB 19 194289GS
TANK, Chemical 20 315530GS
DECAL 21 316723GS
CAP, Fuel 22 316670GS
DECAL 23 316778GS
SCREW, M6 x 25 HEX 24 -----
WASHER 25 312005GS
VALVE, Fuel 26 209417GS
GROMMET 27 30809GS
TANK, Fuel 28 315531GS
BARB, Hose 29 317025GS
WRAP, Hose 30 316374GS
SCREW, M6-1.0 x 16 31 -----
HOSE, Vapor (cut to t) 32 315017GS
CLAMP 33 48031JGS
* ( Engine parts are available through your Enine Manufacturer)
4
The above parts group applies to the following Mfg. Nos.:
Briggs & Stratton Power Products Group, LLC
Copyright © by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
2012317992
020524-00 - 3,300 PSI Hus qvarna
Not
for
Reproduction
Main Unit
316335
NOTE: Unless noted otherwise,
use the standard hardware torque
specication chart.
PART NO. DESCRIPTIONREF.
Footnotes
PART NO. DESCRIPTIONREF.
KIT, Fuel Hose (cut to t) 34 791745
DECAL 35 197798GS
PIN, Hair 36 5025210YP
WASHER, Flat 5/8" 37 -----
WHEEL 38 316406GS
AXLE 39 317577GS
WHEEL, Caster 40 316405GS
HEATSHIELD 41 316504GS
HEATSHIELD 42 316505GS
SCREW, M8 - 1.25 x 20 43 -----
FITTING 44 95458GS
MOUNT, Vibration 45 21217GS
MUFFLER 46 188301GS
BRACKET, Muer 47 191785GS
SCREW, M6 1.0 x 12 48 -----
GASKET 49 697815
PUMP 50 317944GS
TRAY-BATTERY 51 316511GS
CLAMP 52 48031GGS
HOSE-CHEMICAL 53 A1040DGS
SCREW, 5/16-24 x 1 54 -----
WASHER 55 92479GS
KEY 56 23139DGS
DECAL 57 208538GS
DECAL 58 316727GS
FILTER, Garden Hose 59 B2384GS
CARBON CANISTER 60 316783GS
CLIP 61 316503GS
KIT, Nozzle 62 208324GS
NOZZLE, QC Black -- 198841GS
NOZZLE, QC Red -- 195983NGS
NOZZLE, QC Green -- 195983QGS
NOZZLE, QC Yellow -- 195983PGS
NOZZLE, QC White -- 195983RGS
* ( Engine parts are available through your Enine Manufacturer)
5
The above parts group applies to the following Mfg. Nos.:
Briggs & Stratton Power Products Group, LLC
Copyright © by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
2012317992
020524-00 - 3,300 PSI Hus qvarna
Not
for
Reproduction
Main Unit
316335
NOTE: Unless noted otherwise,
use the standard hardware torque
specication chart.
PART NO. DESCRIPTIONREF.
Footnotes
PART NO. DESCRIPTIONREF.
OIL BOTTLE 63 316768GS
GUN 64 316157GS
HOSE 65 316467GS
MANUAL-OPERATOR 66 316333GS
EXTENSION 67 207785GS
WASHER, FLAT 5/16 68 -----
FITTING 69 195894GS
CONNECTOR 70 195893GS
VALVE, Thermal Reief 71 208673GS
SWITCH 72 7028765YP
BOOT, Rubber 73 312687GS
JACK, Coaxial 74 208511GS
BATTERY 75 316543GS
COVER, Battery 76 316729GS
CHARGER, Battery 77 B4177GS
CABLE ASSEMBLY 78 690795
BRACKET SOLENOID ASSEMBLY 79 557067
ENGINE 900-----
WRENCH, Allen (Parts Not Illustrated) -- 316782GS
CABLE, Battery, Red (Parts Not Illustrated) -- 317898GS
CABLE, Battery, Black (Parts Not Illustrated) -- 317943GS
KEY (Parts Not Illustrated) -- 601 40 00 76
OIL FUNNEL (Parts Not Illustrated) -- 317365GS
KIT, Battery Hardware (Parts Not Illustrated) -- 315546GS
PUMP SAVER (Optional Accessories) -- 6039
* ( Engine parts are available through your Enine Manufacturer)
6
The above parts group applies to the following Mfg. Nos.:
Briggs & Stratton Power Products Group, LLC
Copyright © by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
2012317992
020524-00 - 3,300 PSI Hus qvarna
Not
for
Reproduction
Pump
316158
NOTE: Unless noted otherwise,
use the standard hardware torque
specication chart.
PART NO. DESCRIPTIONREF.
Footnotes
PART NO. DESCRIPTIONREF.
INJECTOR, Detergent 20 198851GS
JET 25 204860GS
O-RING 26 204859GS
CAP, Check Valve 34 198850GS
DIPSTICK 50 198849GS
SCREW 66 198297GS
PLUG, Drain 83 203034GS
KIT, Unloader A 198736GS
KIT, Check Valve B 198843GS
KIT, Piston C 198844GS
KIT, Chemical Injector D 192914GS
KIT, Water Seal E 198845GS
KIT, Support Ring F 198848GS
KIT, Hardware G 198852GS
KIT, Oil Seals H 198846GS
KIT, O- Ring J 198847GS
KIT, Unloader Seat K 202902GS
KIT, Unloader L 202800GS
FILTER, Garden Hose (Parts Not Illustrated) -- B2384GS
PUMP SAVER (Optional Accessories) -- 6039
7
The above parts group applies to the following Mfg. Nos.:
Briggs & Stratton Power Products Group, LLC
Copyright © by Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved
2012317992
020524-00 - 3,300 PSI Hus qvarna
Not
for
Reproduction
in/lbs
ft/lbs
3
Torque Specication Chart
FOR STANDARD METRIC MACHINE HARDWARE (Tolerance ± 20%)
Property
Class
Class 8.8 Class 10.9 Class 12.9
Size Of
HardwareNm. Nm. Nm. Nm.
M3
1.28
2.90
5.75
9.9
16.5
24
48
83
132
200
275
390
530
375
995
1350
1830
2360
3050
13.44 1.80
4.10
8.10
14
23
34
67
117
185
285
390
550
745
960
1400
1900
2580
3310
4290
19.2 22.92
2.15
M4
30.72 43.44 52.56
4.95
M5
60.96
5.97 7.15
16.5
9.7
M6 7.3 10.3 12.1
M7 12.1 16.9 19.9 27
M8 17.7 25 29 40
M10 35 50 59 81
M12 61 86.2 103 140
M14 101 136 162 220
M16 147 210 250 340
M18 202 287 346 470
M20 290 405 486 660
M22 390 559 656 890
M24 497 708 840 1140
M27 733 1032 1239 1680
M30 995 1401 1681 2280
M33 1349 1902 2278 3090
M36 1740 2441
3798
2935 3980
M39 2249 3163
Torque Specication Chart
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
Hardware
Grade
SAE Grade 2 SAE Grade 5 SAE Grade 8
Size Of
in/lbs
ft/lbs
in/lbs
ft/lbs
in/lbs
ft/lbs
in/lbs in/lbs
Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.
8-32
19
2.1
30
3.4
41
4.6
8-36
20
2.3
31
3.5
43
4.9
10-24
27
3.1
43
4.9
60
6.8
10-32
31
3.5
49
5.5
68
7.7
1/4-20
66
7.6 810.9 12 16.3
1/4-28
76
8.6 10 13.6 14 19.0
5/16-18 11 15.0 17 23.1 25 34.0
5/16-24 12 16.3 19 25.8 29 34.0
3/8-16 20 27.2 30 40.8 45 61.2
3/8-24 23 31.3 35 47.6 50 68.0
7/16-14 30 40.8 50 68.0 70 95.2
7/16-20 35 47.6 55 74.8 80 108.8
1/2-13 50 68.0 75 102.0 110 149.6
1/2-20 55 74.8 90 122.4 120 163.2
9/16-12 65 88.4 110 149.6 150 204.0
9/16-18 75 102.0 120 163.2 170 231.2
5/8-11 90 122.4 150 204.0 220 299.2
5/8-18 100 136 180 244.8 240 326.4
3/4-10 160 217.6 260 353.6 386 525.0
3/4-16 180 244.8 300 408.0 420 571.2
7/8-9 140 190.4 400 544.0 600 816.0
7/8-14 155 210.8 440 598.4 660 897.6
1-8 220 299.2 580 788.8 900 1,244.0
1-12 240 326.4 640 870.4 1,000 1,360.0
Hex Head Capscrew
Hex Nut
Lockwasher
Washer
Carriage Bolt
NOTES
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for ange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specication.
Hardware Identication & Torque Specications
Common Hardware Types
No
Marks
The guides and ruler furnished below are designed to
help you select the appropriate hardware.
8.8 10.9 12.9
Class 5.6
5.6
5150
13.44 1.28
5.88
26.4 2.50
44.64 4.3
5.2
7.1
7.7
10.5
15
21
988
1340
759
1030
590
800
435
590
320
435
217
295
169
230
126
171
89
121
64
88
42
58
26
36
.56
Thread
Diameter (mm)
Screw, 1/2- 16 x 2
Body
Diameter
Diameter
Inside
Diameter (in)
Nut, 1/2-16
0
1/4 3/4
1/2
21
1/4 3/4
1/2 1/4 3/4
1/2 1/4 3/4
1/2
4
90 10070 80
50 60
30 40
0 10 20
Thread
Diameter (mm)
Nut, M8 Screw, M8- 1.25 x 25
Distance between
threads (mm)
Body
Length (in)
Body
Length (mm)
3/8” Bolt or Nut
Wrench—9/16”
5/16” Bolt or Nut
Wrench—1/2”
1/4” Bolt or Nut
Wrench—7/16”
1/2” Bolt or Nut
Wrench—3/4”
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
in/lbs
Threads
per inch
Threads
per inch
Body Length
Body
When a washer or nut is identied as 1/2” (M8), this is
the
Nominal size
, meaning the
inside diameter
is 1/2 inch
(8mm metric thread diameter); if a second number is present
it represents the
threads per inch
(distance between threads).
When bolt or capscrew is identied as 1/2 - 16 x 2” (M8 - 1.25 x 50 ),
this means the
Nominal size
, or body diameter is 1/2 inch (8mm
metric thread diameter), the second number,16, represents the
threads per inch, (1.25 thread diameter).
The nal number is the
body length of the bolt or screw, 2 inches (50mm).
Standard Hardware Sizing
M6 Bolt or Nut
Wrench—10mm
M8 Bolt or Nut
Wrench—13mm
M10 Bolt or Nut
Wrench—17mm
M12 Bolt or Nut
Wrench—19mm
M14 Bolt or Nut
Wrench—22 mm
Wrench & Fastener Size Guide
Not
for
Reproduction
2012
Briggs & Stratton Power Products Group, LLC
Copyright© Briggs & Stratton Power Products Group, LLC. All rights reserved. No part of this page can be
produced or transmitted in any form by any means without the express written permission of Briggs & Stratton Power
Products Group, LLC.
