Hytera Communications ADN01 Wireless Audio Adapter User Manual

Hytera Communications Corporation Ltd. Wireless Audio Adapter Users Manual

Users Manual

Items in the PackagePlease unpack carefully and check that all items listed below are received. If any item is missing or damaged, please contact your dealer. No. Name Qty.1 Wireless Earpiece 12 Earhook 13 Rubber Ear Cushion 34Wireless Audio Adapter 15 Owner’s Manual 1Function OverviewThis exquisite, easy-wearing and low-powered wireless earpiece is applicable to Hytera portable radios with rmware version of 5.05 and above. With Hands-free function, you can have convenient and safe communication within a distance of 10 meters from the radio. You can use the wireless earpiece to communicate regardless whether the radio supports BT feature or not.
Product OverviewWireless Earpiece
Wireless Audio Adapter
SpecicationTalk Time >4 hoursD u s t/Wa t e r P r o t e c t i o n ClassIP54Operation TemperatureWireless Earpiece: -20˚C to +60˚CWireless Audio Adapter: -25˚C to +65˚CStorage TemperatureWireless Earpiece: -40˚C to +75˚CWireless Audio Adapter: -40˚C to +75˚CCharging the Wireless EarpieceNote: ●To charge the wireless earpiece, simply connect it to the adapter on the radio. It is recommended to use the  high-capacity battery specified by  the  Company  to ensure  the optimal operation duration  of  the radio.  ●Charging the  wireless  earpiece  will not affect the radio operation.  ●If  the  earpiece is  idle for  a long time, charge it at least once within three months.  ●If  the LED indicator  does  not  glow red while the wireless earpiece is being charged, charge the earpiece for  10  to  20  minutes  for  it  to  recover to normal status. Charge the wireless earpiece before use. The  LED indicator  of  the  wireless  earpiece glows red  during charging and  glows blue when the  wireless earpiece is  fully charged. Also, the LED indicator  indicates the pairing and  connection  status.  Please  refer  to  LED Indication for details. 1.  Connect the wireless audio adapter to the radio and secure the screw to fasten it.
3.  Turn on the radio. Caution: The wireless earpiece can be  charged  only when the  radio is powered on. Please ensure the radio is powered on when charging the radio (with battery attached) and the wireless earpiece at the same time. 2.  Fix the wireless earpiece into the wireless audio adapter.   Make sure the wireless earpiece is fully xed into the adapter.
Pairing with and Connecting to the AdapterBefore initial connection, the wireless earpiece needs to be paired with the adapter rst. Afterwards,  the  wireless  earpiece can connect to the adapter without pairing. 1.  Disconnect the wireless earpiece from other devices. 2.  Connect the wireless earpiece with the radio. (See Charging the Wireless Earpiece for details)3.  Turn on the radio, and the wireless earpiece will be powered up. 4.  The wireless earpiece will be paired with and connected to the adapter automatically.  ●Pairing mode: The LED indicator of the wireless earpiece/adapter flashes red and blue alternatively.  ●Connection status: The LED indicator ashes blue rapidly  after the connection is completed. Wearing the Wireless EarpieceTips: There  are  three  rubber  ear cushions with  different  sizes provided with  the  wireless earpiece for your comfortable wearing. Wear the wireless earpiece after the connection is completed. Adjust the rubber ear cushion to position it into your ear canal, and adjust the earhook to secure the earpiece.
Transmitting After detaching  the  wireless earpiece  from the adapter, you can hold down the PTT key on the  wireless  earpiece or  the PTT  key on the adapter to make a call. Powering On/OffThe wireless earpiece will give ring indication (you can hear it only when you are wearing the wireless earpiece) upon power-on/off. Powering On ●Automatic power-on: When attached to the radio via the adapter, the wireless earpiece will be powered on automatically when the radio is turned on.  ●Manual power-on: When the wireless earpiece is not attached with the adapter, you can power on the wireless earpiece by long pressing the PTT key on it. The adapter can be powered on by turning on the radio only. The LED  indicator ashes after  the wireless earpiece is powered on. Please refer to LED Indication for indication details. Powering OffTo power off the adapter, turn off the radio. To power off the wireless earpiece, long press the PTT key after the BT connection is disconnected (the LED indicator ashes blue slowly). The LED indicator goes out when the wireless earpiece is powered off. LED IndicationCaution:  ●When the wireless earpiece is being charged  on  the adapter,  the LED indicator glows red when charging is  in  process  and  glows  blue  when  the wireless earpiece  is  fully charged. In this case, the  following indications  are  not  applicable. You can  identify  the  status  of the wireless earpiece  via the  LED indication of the  adapter.  You  can
also detach the wireless earpiece from  the  adapter  to identify  the status of the wireless earpiece.  ●The following indications  do not include the charging indications. LED Indication Earpiece StatusThe LED indicator ashes red and blue alternatively. PairingThe LED Indicator glows red. TransmittingThe LED indicator ashes red. Low battery power (applicable to wireless earpiece only)The LED indicator ashes blue twice rapidly. Connected with no voiceThe LED indicator ashes blue once rapidly. Connected with voiceThe LED indicator ashes blue slowly. Paired but not connectedTroubleshootingPhenomena Analysis SolutionThe LED indicator does not glow red while the wireless earpiece is being charged. The battery power of the wireless earpiece may run out completely. Charge the wireless earpiece for 10 to 20 minutes. The wireless earpiece cannot pair with the adapter. The wireless earpiece or the adapter may pair with other BT devices. Move away from other BT devices and restart the radio to pair the wireless earpiece with the adapter.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1)     This device may not cause harmful interference, and (2)     This device must accept any interference received, including interference that may cause undesired operation   Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:   (1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the Device. The device has been tested and compliance with SAR limits, users can obtain Canadian information on RF exposure and compliance Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil nedoit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Après examen de ce matériel aux conformité aux limites DAS et/ou aux limites d’intensité de champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and compliance d’acquérir les informations correspondantes Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.

Navigation menu