Hytera Communications DS-6210 DMR Trunking base station User Manual

Hytera Communications Corporation Ltd. DMR Trunking base station Users Manual

Users Manual

            DS-6210 Base Station   Owner's Manual          Version: V00 Release Date: July 29th, 2011
Copyright Information Hytera is the trademark or registered trademark of Hytera Communications Co., Ltd. (the Company) in PRC and/or other countries or areas. The Company retains the ownership of its trademarks and product names. All other trademarks and/or product names that may be used in this manual are properties of their respective owners.   The product described in this manual may include the Company’s computer programs stored in memory or other media. Laws in PRC and/or other countries or areas protect the exclusive rights of the Company with respect to its computer programs. The purchase of this product shall not be deemed to grant, either directly or by implication, any rights to the purchaser regarding the Company’s computer programs. Any of the Company’s computer programs may not be copied, modified, distributed, decompiled, or reverse-engineered in any manner without the prior written consent of the Company.   DisclaimerThe Company endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy or reliability is given. All the specifications and designs are subject to change without notice due to continuous technology development. No part of this manual may be copied, modified, translated, or distributed in any manner without the express written permission of us.   If you have any suggestions or would like to learn more details, please visit our website at: http://www.hytera.com.
DS-6210 Base Station Owner's Manual  Contentsi  Contents Preface ....................................................................................................................................................11. Checking Items in the Package.........................................................................................................22. Product Controls ................................................................................................................................32.1 Base Station Interface Unit .............................................................................................................32.1.1 Antenna Connector ...............................................................................................................32.1.2 Extended Interface Board .....................................................................................................42.1.3 Power Supply Module...........................................................................................................52.2 Cartridge .........................................................................................................................................52.3 Channel Unit ...................................................................................................................................52.3.1 Function................................................................................................................................62.3.2 Front Panel ...........................................................................................................................62.3.3 LED Indicator ........................................................................................................................72.4 Base Station Controller Unit (BSCU) ..............................................................................................82.4.1 Function................................................................................................................................92.4.2 Front Panel ...........................................................................................................................92.4.3 LED Indicator ......................................................................................................................102.4.4 Power Support Unit (PSU)..................................................................................................112.4.5 Function..............................................................................................................................112.4.6 Front Panel .........................................................................................................................122.4.7 LED Indicator ......................................................................................................................132.4.8 Interconnect Backboard (ICB).............................................................................................132.4.9 Front Side ...........................................................................................................................142.4.10 Back Side..........................................................................................................................142.5 Fan Unit (FAN)..............................................................................................................................162.5.1 Front Panel .........................................................................................................................162.5.2 LED Indicator ......................................................................................................................172.5.3 Rear Panel..........................................................................................................................172.6 Divider Unit (DIU)..........................................................................................................................182.6.1 Function..............................................................................................................................182.6.2 Front Panel .........................................................................................................................192.6.3 Rear Panel..........................................................................................................................192.7 Router ...........................................................................................................................................202.7.1 Function..............................................................................................................................202.7.2 Front Panel .........................................................................................................................202.7.3 Rear Panel..........................................................................................................................212.7.4 LED Indicator ......................................................................................................................21
Contents  DS-6210  Base  Station  Owner's  Manualii2.8 Combiner (COM)...........................................................................................................................222.8.1 Function..............................................................................................................................232.8.2 Rear Panel..........................................................................................................................233. Installation ........................................................................................................................................243.1 Cable Layout.................................................................................................................................243.2 Safety Information.........................................................................................................................253.2.1 Power Supply......................................................................................................................253.2.2 Working at Heights..............................................................................................................253.3 Installation Preparation .................................................................................................................263.3.1 Technical Files ....................................................................................................................263.3.2 Personnel ...........................................................................................................................263.3.3 Tools ...................................................................................................................................263.4 Unpacking Inspection....................................................................................................................273.4.1 Check before Unpacking.....................................................................................................273.4.2 Unpacking Wooden Case ...................................................................................................273.4.3 Unpacking Cartons .............................................................................................................293.4.4 Inspections..........................................................................................................................293.5 Installing the Cabinet ....................................................................................................................293.5.1 Determine the Installation Position .....................................................................................293.5.2 Installing the Cabinet ..........................................................................................................313.6 Installing Modules into the Cabinet ...............................................................................................323.6.1 Module Layout ....................................................................................................................323.6.2 Installation Procedures .......................................................................................................323.7 Installing Cables ...........................................................................................................................363.7.1 Equipment Status................................................................................................................363.7.2 Cables ................................................................................................................................373.8 Examination after Installation........................................................................................................373.8.1 Equipment Status................................................................................................................373.8.2 Examining the Cabinet........................................................................................................383.8.3 Examining Cables...............................................................................................................383.8.4 Power On and Examination ................................................................................................393.8.5 Environment Examination...................................................................................................394. Basic Operations..............................................................................................................................404.1 Powering on..................................................................................................................................404.2 Powering off..................................................................................................................................405. Troubleshooting ...............................................................................................................................416. Routine Maintenance .......................................................................................................................426.1 Purpose ........................................................................................................................................42
DS-6210 Base Station Owner's Manual  Contentsiii6.2 Tasks ............................................................................................................................................42A Abbreviations....................................................................................................................................43
Figures  DS-6210  Base  Station  Owner's  ManualivFiguresFigure 2-1 Components of Base Station Interface Unit .....................................................................3Figure 2-2 Antenna Connector ..........................................................................................................4Figure 2-3 Extended Interface Board ................................................................................................4Figure 2-4    Components of Power Supply Module ..........................................................................5Figure 2-5 Full Configuration for Main Chassis .................................................................................5Figure 2-6 Logical Architecture of Channel Unit................................................................................6Figure 2-7 Front Panel of CHU..........................................................................................................7Figure 2-8 Logic Architecture of BSCU .............................................................................................8Figure 2-9 Front Panel of BSCU .......................................................................................................9Figure 2-10 Front Panel of PSU ......................................................................................................12Figure 2-11 ICB (front side).............................................................................................................14Figure 2-12 ICB (back side ) ...........................................................................................................15Figure 2-13 Front Panel of FAN ......................................................................................................16Figure 2-14 Rear Panel of FAN.......................................................................................................17Figure 2-15 Diagram of DIU ............................................................................................................18Figure 2-16 Front Panel of DIU .......................................................................................................19Figure 2-17 Rear Panel of DIU........................................................................................................19Figure 2-18 Front Panel of Router...................................................................................................20Figure 2-19 Rear Panel of Router ...................................................................................................21Figure 2-20 Logic Diagram of Four Combiners ...............................................................................23Figure 2-21 Rear Panel of Combiner...............................................................................................23Figure 3-1 Diagram of Cable Connection ........................................................................................24Figure 3-2 Remove the Cover .........................................................................................................28Figure 3-3 Place the Wooden Case Upright....................................................................................28Figure 3-4 Layout of holes for a Single Cabinet ..............................................................................30
DS-6210 Base Station Owner's Manual  FiguresvFigure 3-5 Layout of holes for Combined Cabinet...........................................................................31Figure 3-6 Tighten the Bolt..............................................................................................................32Figure 3-7 Layout of Modules in the Cabinet...................................................................................32Figure 3-8 Opening the Cabinet Door .............................................................................................33Figure 3-9 Disassembling the Side Door.........................................................................................33Figure 3-10 Loosening the Ejector ..................................................................................................34Figure 3-11Installing the BSCU.......................................................................................................34Figure 3-12 Installing the FAN.........................................................................................................35Figure 3-13 Removing the FAN.......................................................................................................35Figure 3-14 Installing the Divider Unit .............................................................................................35Figure 3-15 Installing the Combiner Unit .........................................................................................36Figure 3-16 Cable Diagram .............................................................................................................36Figure 3-17 External Cable Connection ..........................................................................................37
Tables  DS-6210  Base  Station  Owner's  ManualviTablesFigure 1-1 Packing List......................................................................................................................2Table 2-1 Descriptions on CHU Front Panel .....................................................................................7Table 2-2 Descriptions on CHU Indicators ........................................................................................8Table 2-3 Descriptions on BSCU Front Panel ...................................................................................9Table 2-4 Descriptions on BSCU Indicators ....................................................................................11Table 2-5 Descriptions on PSU .......................................................................................................12Table 2-6 Descriptions on PSU Front Panel....................................................................................13Table 2-7 Descriptions on PSU Indicators.......................................................................................13Table 2-8 Description on ICB (front side) ........................................................................................14Table 2-9 Description on ICB Interfaces (Back Side) ......................................................................16Table 2-10 Description on ICB DIP Switch......................................................................................16Table 2-11 Descriptions on FAN Indicators.....................................................................................17Table 2-12 Descriptions on FAN Front Panel..................................................................................18Table 2-13 Descriptions on FAN DIP Switch Settings .....................................................................18Table 2-14 Descriptions on DIU Front Panel...................................................................................19Table 2-15 Descriptions on DIU Rear Panel ...................................................................................20Table 2-16 Description on DIU Address Setting..............................................................................20Table 2-17 Descriptions on Router Rear Panel...............................................................................21Table 2-18 Descriptions on Router Indicators .................................................................................22Table 2-19 Descriptions on COM Front Panel.................................................................................23Table 3-1 Technical Files ................................................................................................................26Table 3-2 Tools and Meter ..............................................................................................................26Table 3-3 Cables Description ..........................................................................................................37Table 3-4 Checklist of Cabinet Installation ......................................................................................38Table 3-5 Checklist of Cables .........................................................................................................38Table 3-6 Checklist of Power Situation............................................................................................39
DS-6210 Base Station Owner's Manual  TablesviiTable 3-7 Checklist of Environment on Site ....................................................................................39Table 7-1 Troubleshooting ..............................................................................................................41
Tables  DS-6210  Base  Station  Owner's  ManualviiiThis page is intentionally left blank.
DS-6210 Base Station Owner's Manual  Preface1PrefaceThis section describes the conventions and revision history of this document.   Documentation Conventions   Instructional Icons   Icon Description   Tip  Indicates information that can help you make better use of your product. Note   Indicates references that can further describe the related topics.   Caution   Indicates situations that could cause data loss or equipment damage.   Warning  Indicates situations that could cause minor personal injury.   Danger  Indicates situations that could cause major personal injury or even death.   Notational Conventions Item Description   “ ” This symbol is used to describe name of an interface control item. For example, click “OK”.Ǐ ǐ This symbol is used to describe name of a button for a terminal. For example, press the PTT key.   ->This symbol is used to direct you to access multi-level menus. For example, to select “New” from the “File” menu, we will describe it as follows: File->New. Revision HistoryVersion Release Date  Description V00  July 29th, 2011  Initial Release.
Checking Items in the Package  DS-6210  Base  Station  Owner's  Manual21. Checking Items in the Package No. Item Qty. (PCS) 1  Base Station Controller Unit (BSCU)  1 2  Channel Unit (CHU)  4 3  Power Support Unit (PSU)  2 4  Fan Unit  15  Divider Unit (DIU)  1 6  Combiner Unit (COM)  1 7  Cabinet Kit  1Figure 1-1 Packing List
DS-6210 Base Station Owner's Manual  Product  Controls32. Product Controls 2.1   Base Station Interface Unit   The base station interface unit on top of the cabinet consists of the antenna connector, extended interface board and power supply module. See Figure 2-1.Figure 2-1 Components of Base Station Interface Unit 2.1.1 Antenna Connector The antenna connector is described in Figure 2-2.
Product Controls  DS-6210  Base  Station  Owner's  Manual41 GPS Antenna Connector 2 RX Antenna Connector 3 TX Antenna Connector123Figure 2-2 Antenna Connector 2.1.2 Extended Interface Board The extended interface board consists of core network interface, extended interface and monitor interface. See Figure 2-3.Figure 2-3 Extended Interface Board Core network interface The core network interface contains 4-path EI interface and 2-path Ethernet interface.   Extended interface   The extended interface has 8-path extended signals. It is applied to connect to four interconnect relay units of another cabinet, in case of combining two cabinets.   Monitor Interface   The monitor interface includes one bus port and one RS485 port.
DS-6210 Base Station Owner's Manual  Product  Controls52.1.3 Power Supply Module The power supply module is described below.   1351 Ground Row    2 Circuit Breaker     3 AC Input Terminal4  Surge Protection Device  5 AC Output Terminal24Figure 2-4    Components of Power Supply Module 2.2 CartridgeIn accordance with the IEC60297 standard, the cartridge is 19 inches in width and 7U in height. Each cartridge can accommodate four CHUs, two BSCUs and two PSUs.  See Figure 2-5.     CHU02PSU08PSU07BSCU06CHU01BSCU05CHU04CHU03Figure 2-5 Full Configuration for Main Chassis 2.3 Channel Unit   The CHU logically includes power amplification, TX excitation unit, baseband signal processing unit and diversity receiver. See Figure 2-6.
Product Controls  DS-6210  Base  Station  Owner's  Manual6RX Antenna 3PA TX Excitation UnitBaseband Signal Processing UnitPowerDiversity ReceiverTX AntennaICBRX Antenna 2RX Antenna 1Figure 2-6 Logical Architecture of Channel Unit 2.3.1 FunctionThe CHU processes and converts protocols for the physical layer and data link layer of the PDT air interface. Physically it consists of channel board, TX board and RX board.   z  CHB: be capable of signal processing, channel encoding/decoding, interleaver and de-interleaver, modulation/demodulation, RF signal loop-back test and fail-soft.   z  TXB: be capable of modulating, upward frequency conversion, filtering and D/A conversion from carrier baseband signal to RF signal, as well as amplifying the downlink signal.   z  RXB: be capable of filtering, demodulating, downward frequency conversion, AGC and A/D conversion from three-path carrier signal to baseband signal, as well as amplifying the uplink signal.   2.3.2 Front Panel   The front panel of CHU is described as follows.
DS-6210 Base Station Owner's Manual  Product  Controls7Figure 2-7 Front Panel of CHU No. Name    Description 1  RXA  Diversity RX antenna input. 2  RXB  RX antenna input. 3  RXC  Diversity RX antenna input. 4  LED panel    LED indicator   5  RS232  For commissioning. 6  TX  For transmitting.   Table 2-1 Descriptions on CHU Front Panel 2.3.3   LED Indicator   The CHU indicators are described in Table 2-2.
Product Controls  DS-6210  Base  Station  Owner's  Manual8Name    Color Status Description On    Power supply is in good working condition. PWR  Green Off  Power is failure.   On    CHU is communicating with BSCU normally. Flashing  CHU is starting. RUN  Green Off  CHU is repeating. On    CHU is allocating channel.   TX  Green Off  The TX channel is free. On    Carrier signal is present. RX  Green Off  The RX channel is free.   On    The CHU is failure.   ALM  Red Off  The CHU works properly.   On      An alarm is issued due to PLL unlock.   PLL  Red Off  The PLL works properly.   Table 2-2 Descriptions on CHU Indicators 2.4 Base Station Controller Unit (BSCU) The BSCU logically consists of clock board, main control board, clock buffer, Ethernet switch, micro processor unit and power supply. See Figure 2-8.Figure 2-8 Logic Architecture of BSCU
DS-6210 Base Station Owner's Manual  Product  Controls92.4.1 FunctionThe BSCU is mainly in charge of managing the wireless link resources within the coverage, so as to allocate them to different calls.   2.4.2 Front Panel   The front panel of BSCU is illustrated as follows.   Figure 2-9 Front Panel of BSCU No. Name    Qty.  Description 1  SMA Interface    1    GPS signal input.   2  RST Key  1    BSCU reset.   1  Video graphics array.   4  USB.   3CommissioningInterface1  RS232.   4  LED Panel    1  LED Indicator   Table 2-3 Descriptions on BSCU Front Panel
Product Controls  DS-6210  Base  Station  Owner's  Manual102.4.3 LED Indicator   The BSCU indicators are described in Table 2-4.Name    Color Status Description On    Power supply is in good working condition. PWR  Green Off  Power is failure.   FlashingrapidlyThe BSCU operates in master mode. Flashingslowly BSCU operates in slave mode. On    The BSCU is starting. RUN  Green Off  The BSCU does not work properly. Flashing  Functions are disabled locally. On    Functions are disabled via GPS. GPS  Green Off  Functions are enabled via GPS. On    The BSCU is alarming. ALM  Red Off  The BSCU works properly. On    The BSCU links with the CHU properly. FlashingData is being transferred or received between BSCU and CHU. CHU1-4  Green OffThe  link  is  abnormal  or  not  connected  between BSCU and CHU.   On    The BSCU links with the IRU properly. FlashingData is being transferred or received between BSCU and IRU. IRU1-3  Green OffThe  link  is  abnormal  or  not  connected  between BSCU and CHU.
DS-6210 Base Station Owner's Manual  Product  Controls11Name    Color Status Description On   The  active  BSCU  links  with  the  standby  BSCU properly. FlashingData  is  being  transferred  or  received  between  the standby BSCU and active BSCU. BAK  Green OffThe  link  is  abnormal  or  not  connected  between  the standby BSCU and active BSCU. On    The BSCU links with the MCB properly. FlashingData is being transferred or received between BSCU and MCB. MCB  Green OffThe  link  is  abnormal  or  not  connected  between BSCU and MCB. On    The BSCU links with the LNA properly. FlashingData is being transferred or received between BSCU and LAN. LAN1-2  Green OffThe  link  is  abnormal  or  not  connected  between BSCU and LAN. Table 2-4 Descriptions on BSCU Indicators 2.4.4 Power Support Unit (PSU) The PSU consists of power monitoring board, power module and LED panel.   2.4.5 FunctionAll functions of PSU are described in Table 2-5.No. Item Description 1  External power supply input  90~264V AC 47~63Hz 2Voltage  output  (for  main device)13.5V DC 3  Voltage output (for CHU PA)  HVCC˄13.5V DC˅
Product Controls  DS-6210  Base  Station  Owner's  Manual12No. Item Description 4Voltage  output  (for  other power supply from the CHU ) LVCC˄13.5V DC˅5  Voltage output (for BSCU)  BSC_V˄13.2V DC˅6  I/O interface It is connected to 2 BSCUs and outputs three channel signals. The first two is used for resetting PSU, and the last for installation status of PSU.   7  Monitor Interface   It is connected to 2 BSCUs respectively, and outputs two signals including RS485 and CAN-BUS. Table 2-5 Descriptions on PSU 2.4.6 Front Panel   The front panel of PSU is illustrated as follows.   Figure 2-10 Front Panel of PSU
DS-6210 Base Station Owner's Manual  Product  Controls13No. Name    Qty.  Description 1  LED Panel  1  LED indicator   2  ON/ OFF Switch  1  Power Switch Table 2-6 Descriptions on PSU Front Panel 2.4.7 LED Indicator   The PSU indicators are described in Table 2-7.Name    Color Status Description On    Major alarm.   Blinking per secondMinor alarm.   ALM  Red Off  The PSU works properly.   On    Path 1 outputs normally. Flashing  Path 1 outputs HVCC or LVCC alarm.   PWR1  Green Off  No voltage is available in Path 1.   On    Path 2 outputs normally. Flashing  Path 2 outputs HVCC or LVCC alarm.   PWR2  Green Off  No voltage is available in Path 2. On    The output voltage for BSC is normal.     Blinking per secondAn alarm is issued due to  over-voltage  or low voltage for BSC.   BSC  Green Off  The voltage for BSC is failure.   Table 2-7 Descriptions on PSU Indicators Note:The power module has two-path outputs including VCC and LVCC.2.4.8 Interconnect Backboard (ICB) The ICB is utilized to achieve power interconnection, synchronization clock interconnection, signaling,
Product Controls  DS-6210  Base  Station  Owner's  Manual14voice and data interconnection, monitor interconnection, and I/O interconnection.   2.4.9 Front Side The front side of ICB is described below.Figure 2-11 ICB (front side) No. Name    Qty.  Description 1  CHU Interface  4  For signal from CHU to ICB. 2BSCUInterface2  For signal from BSCU to ICB. 3  PSU Interface  2  For signal from PSU to ICB. Table 2-8 Description on ICB (front side) 2.4.10 Back Side The back side of ICB is described below.
DS-6210 Base Station Owner's ManualProduct  Controls1565127348Figure 2-12 ICB (back side)No. Name  Qty. Description1 DC Power Inlet 1 DC power input: -48V(NA now)2 AC Power Inlet  1 AC power input: 110V/220V3 EC Interface 2 For interconnecting two cartridges in the cabinet.4 EIB Interface 6For interconnecting two EC cartridges and four IRUs between two  cabinets,  and also  working  as  the  signal  interface  from EIB to ICB in the core network interface board. 5Monitor Interconnection Interface 2 For RS485 bus.6Monitor Interconnection Interface2 For CAN-BUS.
Product Controls  DS-6210  Base  Station  Owner's  Manual16No. Name    Qty.  Description 7  Power Outlet  6  DC power (+13.2V) for BSCU, FAN and DIU.   8  DIP Switch    1  For setting the cartridge address.   Table 2-9 Description on ICB Interfaces (Back Side) The settings of DIP switch are descried in Table 2-10.No. 4 3 2 1 Description  Remark   1  X  ON  X  ON  Address for main chassis.   2  X  ON  X  OFF Address  for  the  first  extended chassis. 3  X  OFF  X  ON Address  for  the  second  extended chassis. 4  X  OFF  X  OFF Address  for  the  third  extended chassis. X: reserved.   Table 2-10 Description on ICB DIP Switch 2.5 Fan Unit (FAN) The FAN consists of a fan cartridge and two independent plugged sub-rack modules. The fan monitor board is located on the back side of fan cartridge. It can accommodate two independent fan sub-racks modules, each of which has three fans, four LEDs and two temperature sensors. 2.5.1 Front Panel   The front panel is illustrated in Figure 2-13.Figure 2-13 Front Panel of FAN
DS-6210 Base Station Owner's Manual  Product  Controls172.5.2 LED Indicator   The FAN indicators are described in Table 2-11.Name    Color Status Description On    Power supply is in good working condition. PWR  Red Off  Power is failure. On    FAN1 works properly.   Off  FAN1 is out of operation or not installed.   1  Green Blinking per secondFAN1 does not work properly.   On    FAN2 works properly.   Off  FAN2 is out of operation or not installed.   2  Green Blinking per secondFAN2 does not work properly.   On    FAN3 works properly.   Off  FAN3 is out of operation or not installed.   3  Green Blinking per secondFAN3 does not work properly.   Table 2-11 Descriptions on FAN Indicators 2.5.3 Rear Panel   The real panel of FAN is described below.   Figure 2-14 Rear Panel of FAN
Product Controls  DS-6210  Base  Station  Owner's  Manual18No. Name    Qty.  Description 1  RS485 Monitor Interface    2 2  CAN-BUS Monitor Interface  2 For connecting ICB and DIU.   3  Power Inlet  2  For connecting ICB.   4  DIP Switch    1  For setting the fan address.   Table 2-12 Descriptions on FAN Front Panel The settings of DIP switch are descried in Table 2-13.No. 4 3 2 1 Description  Note   1  ON  ON  X  X  The first FAN address   2  ON  OFF  X  X The  second  FAN address   3  OFF  ON  X  X  The third FAN address 4  OFF  OFF  X  X  The fourth FAN address X: reserved. Table 2-13 Descriptions on FAN DIP Switch Settings 2.6 Divider Unit (DIU) The logic diagram of DIU is described in Figure 2-15.Figure 2-15 Diagram of DIU 2.6.1 FunctionThe DIU is in charge of allocating the received signal to each transceiver.
DS-6210 Base Station Owner's Manual  Product  Controls192.6.2 Front Panel   The front panel of DIU is illustrated as follows.   Figure 2-16 Front Panel of DIU No. Name    Qty.  Description 1  RXA  8  Diversity RX antenna output. 2  RXB  8  RX antenna output. 3  RXC  8  Diversity RX antenna output. Table 2-14 Descriptions on DIU Front Panel 2.6.3 Rear Panel   The real panel of DIU is described below.     Figure 2-17 Rear Panel of DIU No. Name    Qty.  Description 1  SWITCH  1  For setting the DIU address 2  RS485  2  Monitor Interface   3  CAN-BUS  2  Monitor Interface
Product Controls  DS-6210  Base  Station  Owner's  Manual20No. Name    Qty.  Description 4  PWR  1  Power Inlet 5   1  For grounding   6  RXA  1  Diversity RX antenna A 7  RXB  1  Diversity RX antenna B 8  RXC  1  Diversity RX antenna C Table 2-15 Descriptions on DIU Rear Panel The setting of DIU address is specified in Table 2-16.No. 1 2 3 4 Description  Note   1  ON  ON  X  X  The first DIU address   2  ON  OFF  X  X  The second DIU address   3  OFF  ON  X  X  The third DIU address   4  OFF  OFF  X  X  The fourth DIU address   X: reserved. Table 2-16 Description on DIU Address Setting 2.7 Router2.7.1 FunctionThe router is used for selecting the routing device for message flow or data grouping.   2.7.2 Front Panel   The front panel of router is described in Figure 2-18.PWR SYS ESMFigure 2-18 Front Panel of Router
DS-6210 Base Station Owner's Manual  Product  Controls212.7.3 Rear Panel   The real panel of router is described as follows. 347 1 2512 6 8 9 10 11Figure 2-19 Rear Panel of Router No. Name    No. Name   1  SIC Slot 2  2  SIC Slot 1 3  Ground Port    4  Power Inlet   5  Power Switch  6  Ethernet Port (LAN0) 7  Ethernet Port (LAN1)  8  Configuration Port (CON) 9  Auxiliary Port (AUX)  10  USB Port   11  CF Card  12  L2 Switch Port (LAN2-LAN9) Table 2-17 Descriptions on Router Rear Panel 2.7.4 LED Indicator   The router indicators are described in Table 2-18.Name    Color Status Description On    Power supply is in good working condition. PWR  - Off  Power is failure.   FlashingrapidlyThe system is starting.   GreenFlashingslowly The system works properly.   Front Panel   SYSYellowFlashingrapidlyThe system is failure.
Product Controls  DS-6210  Base  Station  Owner's  Manual22Name    Color Status Description -  Off  The system does not work properly.   On    The ESM card works properly.   Green FlashSlowlyThe router is starting.   Yellow  On    The ESM card is failure.   ESM-  Off  The ESM card is not inserted.   On    The link is not connected.   LINK  - Off  The link has been connected.   Flashing  Data is being transferred or received. ACT  - Off  No data is being transferred or received.On    The CF card has been inserted.   GreenFlashing  The CF card is reading or writing.   Yellow  On    The CF card is failure.   Rear Panel   CF-  Off  The CF card is not inserted or identified.   Table 2-18 Descriptions on Router Indicators 2.8 Combiner (COM) The COM is classified into broadband hybrid combiner, manual tune cavity combiner, and auto tune cavity combiner. The broadband hybrid combiner is applied to the base station with two-carrier, while the manual tune cavity combiner to the base station with more than two-carrier.    The logic diagram of four combiners is shown in Figure 2-20.
DS-6210 Base Station Owner's Manual  Product  Controls23Cavity Resonator Cavity Resonator Cavity Resonator Cavity Resonator5050505050CHU1 CHU2 CHU3 CHU4COM OutputFigure 2-20 Logic Diagram of Four Combiners   2.8.1 FunctionThe COM is used to integrate multiple carriers from the base station sub-system into one output port to transmit by an antenna. 2.8.2 Rear Panel   The rear panel of combiner is described below.     Figure 2-21 Rear Panel of Combiner No. Name    Description 1  ANT  For combing output   2  CH1  For carrier input 1 3  CH2  For carrier input 2 4  CH3  For carrier input 3 5  CH4  For carrier input 4 Table 2-19 Descriptions on COM Front Panel
Installation  DS-6210  Base  Station  Owner's  Manual243. Installation   3.1 Cable Layout   The cable layout of base station is shown Figure 3-1.Figure 3-1 Cable Layout
DS-6210 Base Station Owner's Manual  Installation253.2 Safety Information     To reduce the chance of accident, please read the safety precautions very carefully before installation, maintenance and operations.   3.2.1 Power Supply Danger:Some components of the power system carry hazardous voltage in operation. Direct contact or indirect contact through moist objects with these components will result in fatal injury.   z  Never wear conductive objects such as watches, bracelets, rings and etc during operation.   z  Do use special tools in high voltage and AC operation. z  Do keep moisture out of the power system during operation in moist environment.   z  The equipment should be well earthed in time to avoid damage by lightning strikes in thunderstorm. z  Do turn off the power before assembly or disassembly z  Do verify the compliance of the cable and cable label prior to connection.   z  Ensure that the equipment is well earthed before powering on. z  Turn off the power immediately when water or moisture is found on the cabinet,   z  Make sure all switches of power distribution box are set to off before installation each module in the cabinet   3.2.2 Working at Heights Warning:   Cautions shall be taken to prevent objects from falling during working at heights.   z  Safety protection measures (e.g. wearing a hamlet or the safety belt) shall be taken.   z  The heat-retaining clothes shall be worn before operation in cold areas.   z  Make sure that the ladder is safe for use. Overweight on the ladder is strictly prohibited.     z  Protective measures shall be taken if the slant of the ladder is more than 5m or the ladder is placed on a high ground (>3m) z  Handle and use all equipment and tools with care to avoid falling.
Installation  DS-6210  Base  Station  Owner's  Manual263.3 Installation Preparation   3.3.1 Technical Files   The following table lists the files associated with hardware installation.   File type    File Name  Description   Network Planning Drawing Provided by the R&D engineers or technical sales.   Instructionalfile  for installation Site Survey Report It  is  filled  by  the  investigation  engineer  on site.   DS-6210 PDT Trunking System   DS-6210  PDT  Trunking  Base  Station Hardware Description Manual   ManualsDS-6210  PDT  Trunking  Base  Station Service Manual Shipped with the equipment Other files  Packing List  Shipped with the equipment Table 3-1 Technical Files 3.3.2 PersonnelOnly the adequately trained personnel with satisfactory knowledge of the system can carry out the installation and tuning. The number of installation persons is subject to engineering progress and environment.   3.3.3 ToolsThe following tools and meter are required before installation.   GeneralToolsClaw  hammer,  slot  type  screwdriver,  large  Phillips  screwdriver,  wrench,  paper  knife, connector board and A type ladder.   SpecialToolsESD-preventive wrist strap, cable peeler and crimping pliers.   Meter Multimeter   Table 3-2 Tools and Meter
DS-6210 Base Station Owner's Manual  Installation273.4 Unpacking Inspection   3.4.1 Check before Unpacking   After the equipment arrives at the installation site, you should: z  Check against the packing list, including total amount, customer address, and etc.   z  Contact us in case of any mistake.       z  Check the packaging case is in good condition and not placed upside down.   If the outer package is damaged seriously or soaked, please contact us immediately.   Note:To protect the equipment and investigate the cause, please properly keep the package box, equipment and packing materials, and take photo.   If the above check results are good, unpack and check the equipment.   3.4.2 Unpacking Wooden Case   Caution:   zKeep the wooden case far away from intense shock during transportation.     zNever touch the parts with dirty glove during transportation.   If space permitting, carry the wooden case into or near the computer room before unpacking. This can prevent the chassis from being damaged.   To unpack the wooden case, do as follows:   Step 1  Wear the ESD-preventive glove.   Step 2  Lay the wooden case horizontally on the ground. Do keep the side with frame down.   Insert one end of the slot type screwdriver into the seam between the cover and the case body by the claw hammer; then remove all nails, as shown in Figure 3-2.Tools Claw hammer and slot type screwdriver
Installation  DS-6210  Base  Station  Owner's  Manual28Figure 3-2 Removing the Cover Step 3  Remove the cover. The wooden case may contain the carton or cabinet. As for the former, directly take out the carton from the wooden case and unpack as instructed in Step 6. As for the latter, proceed to the next steps.   Caution:   Pay attention to the nails on the cover, to avoid hand injuries.   Step 4  Place the wooden case in an upright position. Do keep the side of the cabinet with wheel down   Figure 3-3 Erecting the Wooden Case
DS-6210 Base Station Owner's Manual  Installation29Step 5  Remove the foam plate.   Step 6  Slide the cabinet out of the wooden case slowly.   3.4.3 Unpacking Cartons Tool    Paper knife   To open a carton, do as follows:   Step 1  Check the type and quantity of articles inside the carton according to labels, and cut the straps along the seam of the carton cover by the paper knife.   Caution:   Use moderate force to avoid damaging the articles inside.   Step 2  Remove the foam plates and articles.   3.4.4 Inspections   After unpacking all wooden cases and cartons, carefully check the name, type, quantity of goods against the Packing List, and then accept them.   3.5 Installing the Cabinet   3.5.1 Determine the Installation Position   Determine the installation position of the cabinet according to the installation chart. The available space for maintenance should be preserved and be no less than 600mm around the front and back door, as shown in Figure 3-4 and Figure 3-5.
Installation  DS-6210  Base  Station  Owner's  Manual30Figure 3-4 Layout of holes for a Single Cabinet   Wheel
DS-6210 Base Station Owner's Manual  Installation31Figure 3-5 Layout of holes for Combined Cabinet   3.5.2 Installing the Cabinet   To install the cabinet, do as follows:   Step 1  Place the cabinet in the planned position. Fix the cabinet by tightening four bolts at the bottom of the cabinet, as shown in Figure 3-6. 1.  Loosen the upper nut counter-clockwise by the spanner.   2.  Loosen the lower nut counter-clockwise by the spanner and lift the cabinet to an appropriate height.3.  Tighten the upper nut and screw clockwise.     Wheel
Installation  DS-6210  Base  Station  Owner's  Manual32Figure 3-6 Tightening the Bolt   3.6 Installing Modules into the Cabinet   3.6.1   Module Layout The position of all modules to be installed is shown in Figure 3-7.Figure 3-7 of Module Layout   3.6.2 Installation Procedures   Step 1  Open the front and back door, as shown in Figure 3-8.1.  Unlock and remove the key in case of the keyhole in a vertical position.   2.  Firmly press PUSH until the door knob is bounced.   3.  Turn the door knob to the right.   4.  Pull the door knob outwards and open the cabinet door.
DS-6210 Base Station Owner's Manual  Installation33Figure 3-8 Opening the Cabinet Door Step 2  Disassemble the side doors as shown in Figure 3-9. 1.  Remove the eight screws on the frame.   2.  Press down on the two latches and pull out the side door outwards. Caution:   Care shall be taken to avoid injuries upon pulling out the side door outwards.   Figure 3-9 Disassembling the Side Door Step 3  Insert the modules into the cartridge (take the BSCU installation for example)   Note:Make sure the power switch is set to OFF before installing the PSU.     1.  Loosen the two ejectors as shown in Figure 3-10.
Installation  DS-6210  Base  Station  Owner's  Manual34Figure 3-10 Loosening the Ejector 2.  Slide the BSCU along the guide rails smoothly as shown in Figure 3-11˄1˅.3.  Perform the step 1 in a reverse way to lock the two ejectors.4.  Tighten the two screws on the two ejectors and the board respectively as shown in Figure 3-11˄2˅.Note:Loosen the two ejectors and draw out the module in case of removing it during installation.   PushFigure 3-11Installing the BSCU   Step 4  Install the FAN as shown in Figure 3-12.Slide the FAN along the guide rails smoothly until a click is heard.
DS-6210 Base Station Owner's Manual  Installation35Figure 3-12 Installing the FAN Figure 3-13 Removing the FAN Note:Pull the latch inwards and pull out the FAN in case of removing it during installation. See Figure 3-13. Step 5  Install the DIU as shown in Figure 3-14.1.  Slide the DIU along the guide rails.   2.  Fasten all screws to fix the DIU.   Fasten the ScrewFigure 3-14 Installing the Divider Unit Step 6  Install the COM as shown in Figure 3-15. 1.  Slide the COM along the guide rails.     2.  Fasten the four screws.
Installation  DS-6210  Base  Station  Owner's  Manual36Caution:   Handle with care as the COM is heavy.   Figure 3-15 Installing the Combiner Unit Step 7    Connect all cables as shown in Figure 3-16. Figure 3-16 Cable Diagram Step 8  Install the side doors. 1.  Align the side door with the frame and firmly press the latch.     2.  Fasten the eight screws.   3.7 Installing Cables   3.7.1 Equipment Status The equipment shall be in the following status before connecting cables:   z  The cabinet has been installed.   z  All modules have been installed and the power switch is set to OFF.
DS-6210 Base Station Owner's Manual  Installation373.7.2 CablesCables are described in Table 3-3 and their positions are shown in Figure 3-17. Installation positions are located on top of the cabinet. Name    Color Remark   Base  Station Ground  Cable (40m)Yellowishgreen 16 mm2, 49-core, and 450/750V Subject to the actual needs.   AC  Power  Cord (15m)Black  Subject to the actual needs RF  Jumpers  (3 pcs)Black  1/2 inch, N-Male to N-Male Table 3-3 Cables Description   Figure 3-17 External Cable Connection   3.8 Examination after Installation 3.8.1 Equipment Status The equipment shall be in the following status prior to hardware examination.   z  The cabinet has been installed.
Installation  DS-6210  Base  Station  Owner's  Manual38z  All modules have been installed.   z  The external power has been installed and all cables have been connected.   z  All switches of the power distribution box are set to OFF.   3.8.2 Examining the Cabinet   The following requirements shall be met after installation.   No. Check Item   1  The position of the cabinet should conform to the design drawing.   2  All modules should be installed correctly.   3  All cables within the cabinet should be connected properly.   4  The side door should be installed and the grounding cables should be connected properly.   5All  screws should  be  tightened.  Be  sure to  put  flat  washers  and  spring  washers  on  all  bolts correctly.   6  The cabinet should be placed horizontally and orderly.   7The surface of the cabinet should be clean and well painted. No dust and other sundries are in the cabinet.   8  All labels should be correct, clear and not be missed.   9  The plastic dust cap on top of the cabinet should be installed properly.   Table 3-4 Checklist of Cabinet Installation   3.8.3 Examining Cables   The following requirements should be met after connection.   No. Check Item   1  All cables should not be damaged.   2  All cables are one-piece cables, without any joint in the middle. 3  Excess grounding cables should be cut off. Table 3-5 Checklist of Cables
DS-6210 Base Station Owner's Manual  Installation393.8.4 Power On and Examination   Caution:   First measure the resistance of all power connectors and ground connectors using the multimeter and check whether short circuit occurs.The procedures are described as follows:   Step 1  Check the input voltage (220V) from the main power and whether the live line and null line connect correctly. Step 2  All switches of PSU are set to ON. Step 3  Check whether all modules are powered properly. Name    Normal Power Indication CHU  The PWR indicator on the front panel glows and the ALM indicator goes out. BSCU  The PWR indicator on the front panel glows and the ALM indicator goes out. PSU  The PWR indicator on the front panel glows and the ALM indicator goes out. FAN  The PWR indicator on the front panel glows. Table 3-6 Checklist of Power Situation Note:If the LED on the front panel does not work correctly, please re-power it on or re-insert the module after disconnecting power. If it doesn’t solve the problem, please contact us. 3.8.5 Environment ExaminationThe following table lists the check item of environment on site.   No. Check Item   1  The equipment room should be clean and tidy. 2  No sundries should be placed in the grooves, at the bottom of the cabinet or around the cabinet. 3  The floor in the equipment room should be free from sundries. Table 3-7 Checklist of Environment on Site
Basic Operations  DS-6210  Base  Station  Owner's  Manual404. Basic Operations 4.1 Powering on All switches of the PSU are set to ON.   4.2 Powering off     All switches of the PSU are set to OFF.
DS-6210 Base Station Owner's Manual  Troubleshooting415. Troubleshooting Phenomena SolutionThe PWR LED does not light up.  Check the power supply. The ALM LED on the PSU glows red.   Disconnect the power and replace the PSU.   The ALM LED on the CHU glows red.   Replace the CHU. The ALM  LED  on  the  BSCU glows red.   Replace the BSCU. Table 5-1 Troubleshooting
Routine Maintenance  DS-6210  Base  Station  Owner's  Manual426. Routine Maintenance6.1 PurposeRoutine maintenance is to ensure stable and reliable operation of the equipment. It can help to know the operation status of the equipment, so as to detect the potential troubles and remove them on time. The routine maintenance should achieve the following objects:   z  Remove all potential troubles to keep the system work properly. z  Ensure all performance and service specifications meet requirements. z  Ensure good collaboration with the entire network.   z  Make sure that new equipment or the extended equipment accesses to the network properly.   6.2 Tasksz  Clean the equipment room regularly. z  Check the working status of the base station regularly. If the abnormal situation occurs, deal with it in time.z  Clean up the dust regularly.
DS-6210 Base Station Owner's Manual  Routine  Maintenance43A Abbreviations   Abbr. Full Name AGC  Auto Gain Control BSCU  Base Station Controller Unit BSCU-MB  Base Station Controller Unit Main Board BSS  Base Station Sub-system CAN  Controller Area Network CC  Call Control CCL  Call Control Layer CHB  Channel Board CHU  Channel Unit COM  Combiner CPCI  Compact Peripheral Component Interconnect DIU  Divider Unit DLL  Data Link Layer EC  Extended Chassis EIB  Extended Interface Board ETSI  European Telecommunications Standards Institute FAN  Fan Unit GPI  General Purpose Input GPIO  General Purpose Input Output GPO  General Purpose Output GPS  Global Positioning System GPSB  GPS Clock Board
Routine Maintenance  DS-6210  Base  Station  Owner's  Manual44Abbr. Full Name ICB  Interconnect Backboard IO  Input and Output IRU  Interconnect Relay Unit LLC  Logical Link Control LNA  Low Noise Amplifier MAC  Media Access Control MC  Main Chassis MCB  Main Control Board MM  Mobile Management MPSC  Machine-Frame Power Support Component MPU  Micro Processor Unit PAB  Power Amplifier Board PCI  Peripheral Component Interconnect PICMG  PCI Industrial Computer Manufacture's Group PDT  Professional Digital Trunking PSB  Package Switch Board PSU  Power Support Unit RFDS  Radio Frequency Distributing System RT  Router RXB  Receive Board TDM  Time Division Multiplex TMA  Tower Mounted Amplifier TSCU  Trunking Station Control Unit EXB  Excitation Board
DS-6210 Base Station Owner's Manual  Routine  Maintenance 45  Abbr.    Full Name VGA  Video Graphics Array  FCC Warning˖ Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.    This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 2.7 m between the radiator& your body.     

Navigation menu