Hytera Communications GTW-RFCD Patrol Beacon Tool User Manual

Hytera Communications Corporation Limited Patrol Beacon Tool

User manual

GTW-RFCD Guard Tour Patrol System Patrol Beacon Tool Operation Guide Release Version: V2.0 Release Date:2016-09
Copyright Information Hytera is the trademark or registered trademark of Hytera Communications Corporation Limited (the Company) in People's Republic of China (PRC) and/or other countries or areas. The Company retains the ownership of its trademarks and product names. All other trademarks and/or product names that may be used in this manual are properties of their respective owners. The product described in this manual may include the Company's computer programs stored in memory or other media. Laws in PRC and/or other countries or areas protect the exclusive rights of the Company with respect to its computer programs. The purchase of this product shall not be deemed to grant, either directly or by implication, any rights to the purchaser regarding the Company's computer programs. The Company's computer programs may not be copied, modified, distributed, decompiled, or reverse-engineered in any manner without the prior written consent of the Company. Disclaimer The Company endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy or reliability is given. All the specifications and designs are subject to change without notice due to continuous technological development. No part of this manual may be copied, modified, translated, or distributed in any manner without the prior written consent of the Company. We do not guarantee, for any particular purpose, the accuracy, validity, timeliness, legitimacy or completeness of the third-party products and contents involved in this manual. If you have any suggestions or would like to receive more information, please visit our website at: http://www.hytera.com, or call our 400-830-7020.
Content Documentation Information .................................................................................................................... 2 1. Program Update............................................................................................................................. 1 1.1 Communication Status ..................................................................................................................... 1 1.2 Communication Wire Connection ..................................................................................................... 1 1.3 Drive Installation ............................................................................................................................... 2 1.4 Using Communication Software ....................................................................................................... 2 1.5 Running Program.............................................................................................................................. 3 1.6 Specific Program Running Setting ................................................................................................... 4 1.7 Automatic Running Setting ............................................................................................................... 4 2. Beacon Tool Setting ............................................................................................................................. 6 2.1 Beacon Setting ................................................................................................................................. 6 2.2 Convention Radio Setting ................................................................................................................. 7 2.3 Trunking Radio Setting ..................................................................................................................... 8 3. FCC STATEMENT ............................................................................................................................... 10 4. IC STATEMENT ................................................................................................................................... 11
Documentation Information This section describes the conventions and revision history of this document. Documentation Conventions Icon Conventions Icon Description Tip Indicates information that can help you make better use of your product. Note Indicates references that can further describe the related topics. Caution Indicates situations that could cause data loss or equipment damage. Warning Indicates situations that could cause minor personal injury. Danger Indicates situations that could cause major personal injury or even death. Notation Conventions Item Description “ ” The quotation marks enclose the name of a software interface element. For example, click “OK”. 【】 The text in boldface denotes the name of a hardware button. For example, press the 【PTT】key. -> The symbol directs you to access a multi-level menu. For example, to select “New” from the “File” menu, we will describe it as follows: “File -> New”. Revision History Version Release Date Description V2.0.00 2016-9-25 Initial release.
GTW-RFCD Patrol Beacon Tool Operation Guide 1 1. Program Update 1.1 Communication Status Select menu 4 Computer of the main interface of the patrol beacon tool, then the tool enters into the communication status, and waits for the command sent by the computer communication software. 1.2 Communication Wire Connection Insert the two ends of the USB antenna into the patrol beacon tool and computer.
GTW-RFCD Patrol Beacon Tool Operation Guide 2 1.3 Drive Installation The first time connect to the computer, it would show hardware and request drive installation. The installation method is the same with general USB installation method. For 32-bit system, the drive can be installed directly. For 64-bit system, drive installation requests digital signature or disable digital signature. See the drive package for more details. 1.4 Using Communication Software Locate the CLComm file as shown in the figure below.
GTW-RFCD Patrol Beacon Tool Operation Guide 3 Double click the CLComm, find the software upgrade path as shown in the figure. Click the file named Program.rom, and then click Download. Using communication software can synchronize the computer files with patrol beacon tool files. The program can be provided from us, or developed by yourself. 1.5 Running Program If the needed program has been installed, click to run directly. Or you can clickto set up. See the details below.
GTW-RFCD Patrol Beacon Tool Operation Guide 4 1.6 Specific Program Running Setting Click the second menu , and select the program that you need to run. Click the running button at the lower right for program running. After the specific program setting, you can run the program in the first icon menu. 1.7 Automatic Running Setting In the system setting page, select operation page, check the automatic running function. If you want to
GTW-RFCD Patrol Beacon Tool Operation Guide 5 go back to the main program interface, you can hold down the Ent button and don’t loosen it, and then click the reset key with green tip.
GTW-RFCD Patrol Beacon Tool Operation Guide 6 2. Beacon Tool Setting 2.1 Beacon Setting The beacon tool can be powered on through the green button at lower left. Enter the main interface and click beacon for setting, the process is as followed: 1、 Select the ID for setting in ID column, click Connect. 2、New ID number: all the ID numbers of beacons need to be modified. The number increase continuously from 1 to 2000. 3、Power: the power of beacon is adjustable according to the actual need. 4、Sleep time: 2 seconds by default. The beacon will awake and broadcast its ID one time every 2 seconds. 5、Connection cycle: 20 seconds by default and can be set as needed. Click Write Parameter finishing parameters setting. Click Exit Setting for another beacon setting. Note: The ID number and the installation path shall be recorded into the system. Note: The communication overlapping area of beacons is forbidden when employing beacons. Chart: Beacon power setting and coverage distance comparison table. Output Power Communication Distance Note 4dbm 44m—45m 0 dbm 37m—40m -4 dbm 23m—30m -8 dbm 22m—27m -12 dbm 7m—10m -16 dbm 4m—7m -20 dbm 2m—3m -30 dbm 0.2m—0.3m
GTW-RFCD Patrol Beacon Tool Operation Guide 7 Fig. Beacon parameters setting 2.2 Convention Radio Setting 1、Boot beacon tool, enter the “Convention Radio” page 2、Boot the radio (the radio will only connect with beacon tool during the boot process) Parameters modified as followed: 1、Grouping plan: according with system grouping plan. 2、Channel number: 15 3、Center ID：5000，ID number for message link machine.
GTW-RFCD Patrol Beacon Tool Operation Guide 8 Fig. Convention Radio Parameters Setting 2.3 Trunking Radio Setting Note: patrol system installation and PDT specific call number setting must be complete before radio setting Boot the beacon tool through the green button at lower left, click patrol radio after entering the main interface for settings. The process as followed: Boot the radio (the radio will only connect with beacon tool during the boot process) Parameters modified as followed: 1、 Grouping plan: accorded with system grouping plan. CPS-3 for PDT trunking system at home, and DMR for DMR trunking system abroad. 2、initial state: 32 by default (accorded with patrol system server parameters).
GTW-RFCD Patrol Beacon Tool Operation Guide 9 3、ending state: 82 by default (accorded with patrol system server parameters). 4、Replacement number: 5 by default. Modification can be made as needed. 5、Center ID: the number is not open in the system, and the 200 consecutive number after that needs to be non-open (the center ID must be accorded with the parameters of patrol system server and base station, and the ScoutNumMin value). After modifying all the parameters, click write parameters finishing the radio parameters setting, and then click “Exiting Setting”. Turn on another radio for settings. Fig. Trunking Radio Parameters Setting
GTW-RFCD Patrol Beacon Tool Operation Guide 10 3. FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
GTW-RFCD Patrol Beacon Tool Operation Guide 11 4. IC STATEMENT This device complies with Industry Canada licence-exempt RSS standard(s): Operation is subject to the following Two conditions:(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Navigation menu