Hytera Communications MD62XU1 Digital Mobile Radio User Manual

Hytera Communications Corporation Limited Digital Mobile Radio

User manual

Preface Thanks for your favor in our product. This manual is helpful for you to quickly know how to use the product. For detailed features and operations, please refer to the Feature Description and Operation Manual along with the product. To avoid body injury or property loss caused by misoperation, please read the Safety Information Booklet carefully before use. This manual is applicable to the following product: MD62X Digital Mobile Radio (X may represent 2, 5, 6 or 8)
Icon Conventions  : Indicates functions that are available on digital channel only.  : Indicates functions that are available on analog channel only. Functions marked with no icon are available on both analog and digital channels. Disclaimer Hytera Communications Corporation Limited (the Company) endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy or reliability is given. All the specifications and designs are subject to change without notice due to continuous technology development. No part of this manual may be copied, modified, translated, or distributed in any manner without the express written permission of us. We do not guarantee, for any particular purpose, the accuracy, validity, timeliness, legitimacy or completeness of the Third Party products and contents involved in this manual. If you have any suggestions or would like to learn more details, please visit our website at: http://www.hytera.com.
RF Radiation Information This product must be restricted to operations in an occupational/controlled RF exposure environment. Users must be fully aware of the hazards of the exposure and able to exercise control over their RF exposure to qualify for the higher exposure limits. RF Radiation Profile Radio Frequency (RF) is a frequency of electromagnetic radiation in the range at which radio signals are transmitted. RF technology is widely used in communication, medicine, food processing and other fields. It may generate radiation during use. RF Radiation Safety In order to ensure user health, experts from relevant industries including science, engineering, medicine and health work with international organizations to develop standards for safe exposure to RF radiation. These standards consist of:  United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 sub-part J;  American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992;  Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999;  International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998; FCC Regulations Federal Communication Commission (FCC) requires that all radio communication products should meet the requirements set forth in the above standards before they can be marketed in the U.S, and the manufacturer shall post a RF label on the product to inform users of operational instructions, so as to enhance their occupational health against exposure to RF energy. Operational Instructions and Training Guidelines To ensure optimal performance and compliance with the occupational/controlled environment RF energy exposure limits in the above standards and guidelines, users should transmit not more than 50% of the time and always adhere to the following procedures:  Antenna gain must not exceed 5dBi for UHF or 3.5dBi for VHF.  The antenna installation must comply with the requirements of manufacturer or supplier, and it must be at least one meter away from human body.
EU Regulatory Conformance As certified by the qualified laboratory, the product is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC. Please note that the above information is applicable to EU countries only.
Contents 1. Items in the Package .......................................................................................................................... 12. Product Overview ............................................................................................................................... 12.1 Front Panel ..................................................................................................................................... 22.2 Rear Panel ...................................................................................................................................... 32.3 Programmable Keys ....................................................................................................................... 32.4 LCD Icon ......................................................................................................................................... 32.5 LED Indicator .................................................................................................................................. 43. Installation .......................................................................................................................................... 53.1 Instructions ..................................................................................................................................... 53.2 Installation Tools ............................................................................................................................. 53.3 Installation Parts ............................................................................................................................. 63.4 Installation Procedure ..................................................................................................................... 74. Basic Operations ................................................................................................................................ 84.1 Turning the Radio On/Off ................................................................................................................ 84.2 Adjusting the Volume ...................................................................................................................... 84.3 Selecting a Zone ............................................................................................................................. 84.4 Selecting a Channel ........................................................................................................................ 95. Call Services ..................................................................................................................................... 105.1 Private Call ................................................................................................................................ 95.2 Group Call ............................................................................................................................... 105.3 Call on Analog Channel (Without Signaling) ............................................................................ 115.4 Emergency Call ............................................................................................................................ 116. Troubleshooting .................................................................................................. 错误！未定义书签。7. Available Features ............................................................................................................................ 128. Care and Cleaning ............................................................................................................................ 149. Optional Accessories ....................................................................................................................... 15
1 1. Items in the Package Please unpack carefully and check if all items listed below are received. If any item is missing or damaged, please contact your dealer. Radio Palm Microphone Microphone Hanger and Screws Mounting Bracket Kit Fuse Documentation Kit Power Cord Note The frequency band is marked on the label of antenna; if not, please refer to the label on the radio for frequency band information.
2 2. Product Overview 2.1 Front Panel No. Part Name No. Part Name 1 Volume Control 7 Speaker 2 LED Indicator 8 Programmable Keys 3 LCD Display 9 Microphone Connector 4 Programmable Keys 10 Microphone Installation Index 5 Channe selector 11 6 Power On/Off Key 12
3 2.2 Rear Panel No. Part Name No. Part Name 1 RF Antenna Connector (BNC female) 3 Accessory Connector 2 Power Inlet 4 GPS Antenna Connector (SMA female) Note: The GPS antenna connector is available for MD62X mobile radios only. 2.3 Programmable Keys For enhanced convenience, you may request your dealer to program the SK1, SK2, P1, P2 and P3 keys as shortcuts to certain feature. 2.4 LCD Icon Icon Radio Status Blue Tooth is open and connet Low TX power for the current channel. High TX power for the current channel. Digital channel Analog channel The Monitor feature is active. The radio is in emergency state or an emergency call is received.
4 Icon Radio Status The radio is roaming. The radio is scanning. More bars indicate stronger signal strength. 2.5 LED Indicator LED Indication Radio Status The LED indicator flashes green. Powering on The LED indicator glows red. Transmitting The LED indicator glows green. Receiving The LED indicator flashes orange slowly. Scanning or Roaming The LED indicator flashes orange rapidly. Emergency The LED indicator glows orange. Call hang time. No voice is being transmitted or received on the traffic channel during a call. Within such period, you can hold down the PTT key to talk to the other party. Note: Unless otherwise specified, the PTT key mentioned in this manual indicates that of the palm microphone.
5 3. Installation 3.1 Instructions Before you install the radio in a vehicle, be sure to read the following instructions carefully:  The radio must work with a13.6V ± 15% negative ground electrical system only. Ensure to check the ground polarity and voltage of the vehicle power supply prior to installation.  Install the radio in a location where you can reach the front panel conveniently.  Check how long the screws will extend from the bottom surface of the radio before installation. Drill the mounting hole cautiously to avoid damage to the vehicle wiring and other parts.  Install the radio with mounting bracket supplied by the Company, to avoid radio looseness in case of accidents. The loose radio may cause bodily injury.  Connect the antenna and power cord to the radio before you install it in the bracket. And make sure the antenna and power cord are dedicated for digital radios of the Company.  Keep sufficient clearance at the back of the radio for wiring.  Be sure to use the fuse with the same specification for DC power cord upon replacement.  If there are any other device in the vicinity of this radio, the distance between the antenna of this radio and the antenna of such RF device shall be no less than 10 meters. 3.2 Installation Tools  Electric Drill  Cross head screwdriver  Hex socket sleeve (for 4.8 * 20mm self-tapping screws)
6 3.3 Installation Parts No. Part Name No. Part Name 1 Radio 8 Power Inlet 2 Locking Knobs 9 Power Cord (black) 3 Mounting Bracket 10 Power Cord (red) 4 4.8 * 20mm Self-tapping Screws 11 Fuse 5 Palm Microphone 12 RF Antenna Connector
7 No. Part Name No. Part Name 6 4 * 16mm Self-tapping Screws 13 GPS Antenna Connector 7 Microphone Hanger / / 3.4 Installation Procedure 1. Install the bracket in a location where you can operate the radio conveniently. 2. Connect accessories such as the antenna and power cord to the radio. 3. Slide the radio into the properly mounted bracket and secure it using the locking knobs. 4. Install the microphone hanger in a location where it can be reached easily. 5. Plug the palm microphone into the radio, but at first align the triangle index on the palm microphone with the microphone installation index. Place the palm microphone on the hanger when you do not use it.
8 4. Basic Operations 4.1 Turning the Radio On/Off Long press Power On/Off key to turn the radio on and off. 4.2 Adjusting the Volume After the radio is powered on,turn the volume menu up increase the voice volume, turn the volume menu down is to decease it. 4.3 Selecting a Zone A zone is a group of channels with the same property, which can facilitate convenient management over the channels. The radio supports 3 zones, each of which consists of up to 16 channels. If the Zone Notify feature is enabled by your dealer, the radio will announce the zone number when selecting zone. 4.4 Selecting a Channel You can press the Channel Selector knob to switch it to channel selection If the Channel Notify feature is enabled by your dealer, the radio will announce the channel number upon channel switching. Note  The number and alias of a new contact must be unique.
9 5. Call Services After the radio is powered on, you can make and receive calls. To ensure optimal volume of the receiving radio, keep the microphone about 2.5 to 5 centimeters away from your mouth when the radio is transmitting. 5.1 Private Call 5.1.1 Initiating a Private Call When you initiate a private call, the radio will display the icon . You can make a private call through any of the following ways: Preset Contact In the home screen, hold down the PTT key to initiate a private call to the private contact preset for the current channel. You may request your dealer to preset a regular private contact for each digital channel. Contact List Step 1 Go to “Menu -> Contact -> Contact List”. Step 2 Use the Up/Down key to select an appropriate contact. Step 3 Hold down the PTT key to initiate a private call. Call Logs Step 1 Go to “Menu -> Call Logs -> Outgoing/Incoming/Missed”. Step 2 Use the Up/Down key to select an appropriate contact. Step 3 Hold down the PTT key to initiate a private call.
10 Manual Dial Step 1 Go to “Menu -> Contact -> Manual Dial”. Step 2 Input the private call number using the numeric keypad. Step 3 Hold down the PTT key to initiate a private call. Note  If both the Private Call Manual Dial and Group Call Manual Dial are available, you can press to switch between the two dialing methods, and the radio will display the call type (Private ID/ Group ID).  If the Default Numeric Key Selection feature is enabled by your dealer, you can enter a private call number in the home screen, and then hold down the PTT key to initiate a private call. However, if the DTMF keypad is enabled, the number entered in the home screen is a phone number. You can dial the private call number through the “Manual Dial” menu only. 5.1.2 Receiving and Responding to a Private Call When you receive a private call, the radio will display the icon , then you can listen to it without any operation. You can hold down the PTT key to call back within the preset time. If you do not respond to it, the radio will display appropriate indications. 5.2 Group Call 5.2.1 Initiating a Group Call When you initiate a group call, the radio will display the icon . You can make a group call through any of the following ways. The operation is similar to initiating a private call. Preset Contact In the home screen, hold down the PTT key to initiate a group call to the group call contact preset for the current channel. Contact List Step 1 Go to “Menu -> Contact -> Contact List”. Step 2 Use the Up/Down key to select an appropriate contact. Step 3 Hold down the PTT key to initiate a group call. Manual Dial The operation is the same as initiating a private call.
11 5.2.2 Receiving and Responding to a Group Call When you receive a group call, the radio will display the icon on the LCD. You can hold down the PTT key to call back within the preset time. 5.3 Call on Analog Channel (Without Signaling) To transmit on an analog channel, hold down the PTT and speak into the microphone. To receive, release the PTT key. Please refer to the Feature Description and Operation Manual along with the product for operation description on how to make and receive calls on the analog channel with signaling. 5.4 Emergency Call In case of emergency, you can use Emergency Call to ask for help from your companion or the control center. Emergency Call needs to be configured and enabled by your dealer. Please refer to the Feature Description and Operation Manual along with the product for details.
12 6. Troubleshooting Phenomena Analysis Solution The radio cannot be powered on. The power cord may be disconnected. Connect the power cord properly. During receiving, the voice is weak, discontinuous or totally inactive. The volume level may be low. Increase the volume by rotating the Volume Control knob. The antenna may get loose or may be improperly installed. Turn off the radio and reattach the antenna. The speaker may be blocked or damaged. Clean the surface of the speaker. You cannot communicate with other members in analog mode. The frequency or signaling may be inconsistent with that of other members. Set your TX/RX frequency and signaling to the same as that of other members. You may be too far away from the group members. Move towards other members. In digital mode, there’s RX indication on the radio, you cannot communicate with other members. The digital carrier may be received but may not be demodulated due to inconsistent ID with that of other members. Sets the same ID of other members. Irrelevant communication or noise is heard on the channel. You may be interrupted by radios using the same frequency. Adjust the squelch level. The radio may be set with no signaling. Set your radio with signaling to avoid interference at the same frequency, and make sure that all members share the same signaling. The noise is too loud. You may be too far away from other members. Move towards other members, and restart the radio to try again.
13 Phenomena Analysis Solution You may locate in an unfavorable position. For example, your communication may be blocked by high buildings or frustrated in the underground areas. Move to an open and flat area, and restart the radio to try again. You may suffer from external disturbance (such as electromagnetic interference). Stay away from equipment that may cause interference. You cannot use the keys. The keypad may fail to function temporarily. Restart the radio. The LCD does not display any information. The LCD may fail to function temporarily. Restart the radio. The GPS cannot locate your position. The GPS antenna may be connected improperly. Properly connect the GPS antenna. GPS signals may not be received due to unfavorable position. Move to an open and flat area to try again. If the above solutions cannot fix your problems, or you may have some other queries, please contact us or your local dealer for more technical support.
14 7. Care and Cleaning To guarantee optimal performance as well as a long service life of the product, please follow the tips below. Product Care  Do not pierce or scrape the product.  Keep the product far away from substances that can corrode the circuit.  Do not hold the product by its antenna or earpiece cable directly.  Attach the accessory connector cover when the accessory is not in use. Product Cleaning Caution: Power off the product and disconnect the power supply before cleaning.  Clean up the dust and fine particles on the product surface and charging piece with a clean and dry lint-free cloth or a brush regularly.  Use neutral cleanser and a non-woven fabric to clean the keys, control knobs and front case after long-time use. Do not use chemical preparations such as stain removers, alcohol, sprays or oil preparations, so as to avoid surface case damage.  Make sure the product is completely dry before use.
15 8. Optional Accessories The following items are the main optional accessories for the product, and please consult your local dealer for more other accessories. Caution: Use the accessories specified by the Company only. If not, the Company shall not be liable for any loss or damage arising out of use of unauthorized accessories. Type Model Name Power Supply PS16001 Power Supply of Base Station Cabinet PS22002 Power Supply for Mobile Radio (220W, Backup Power Supply applicable) Audio Accessories SM09D1 External Speaker SM10A1 Desktop Microphone SM19A1 Keypad Microphone SM20A1 Telephone Style Handset SM20A2 Telephone Style Handset with Keypad Cable PC37 DB26-connector Programming Cable (USB port) PC40 DB26-connector Data Cable (USB port) PC43 DB26-connector Dispatching Cable with USB Port&Dual Audio Jack PC46 Data Cable(COM Port) PC47 Programming Cable (USB port) PC48 Data Cable(COM Port)(6 meters) PC49 Back-to-back Data Cable (DB26 to DB26) PC60 Ignition Cable for Mobile Radio PC71 Serial Device Server Others BRK15 Installation Accessory for Rack-mounted Power Supply (2U)(Black)(Dual channel) RCC04 Mobile Radio Remote Mount Kit (3 meters)(IP67)
16 Type Model Name RCC05 Mobile Radio Remote Mount Kit (6 meters)(IP67) RCC06 Mobile Radio Remote Mount Kit (3 meters)(IP54) RCC07 Mobile Radio Remote Mount Kit (6 meters)(IP54) - Omni-directional Antenna
17 9. Technical parameters PMR Operation Frequency Range: From 400MHz to 470MHz Rated Output Power: High Power: 45W (46.53dBm)/Low Power: 5W (36.99dBm) Modulation Type: Analog Voice: FM Digital Voice/Digital Data: 4FSK Digital Type: DMR Channel Separation: Analog Voice: 12.5kHz 25kHz Digital Voice/Digital Data: 12.5kHz Emission Designator: Analog Voice: 12.5kHz Channel Separation: 9K89F3E 25kHz Channel Separation: 14K6F3E Digital Voice& Data: 12.5kHz Channel Separation: 7K29FXWDigital Data: 12.5kHz Channel Separation: 7K29FXDSupport data rate: 9.6kbps Antenna Type: External Bluetooth Version: Supported BT4.0+EDR/BLE Modulation: GFSK, π/4DQPSK, 8DPSK Operation frequency: 2402MHz~2480MHz Channel number: 79/40 Channel separation: 1/2MHz Antenna type: Integral Antenna Antenna gain: 0dBi
18 10. FCC STATEMENT ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.NOTE1:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:‐Reorientorrelocatethereceivingantenna.‐Increasetheseparationbetweentheequipmentandreceiver.‐Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.‐Consultthedealeroranexperiencedradio/TVtechnicianforhelp.NOTE2:Anychangesormodificationstothisunitnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser'sauthoritytooperatetheequipment. RFradiationsafetywarningsandthefollowing:Antenna Safe Distance, Rsafe, (cm) FCC Part 2.1091Controlled RF ExposureTQC-150CII (5.5dBi) 70 Theantennaonlycanbeinstalledontheroofofthevehicle.
19 11. IC STATEMENT ThisdevicecomplieswithIndustryCanadalicence‐exemptRSSstandard(s):Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseinterference,and(2)Thisdevicemustacceptanyinterference,includinginterferencethatmaycauseundesiredoperationofthedevice.LeprésentappareilestconformeauxCNRd'IndustrieCanadaapplicablesauxappareilsradioexemptsdelicence.L'exploitationestautoriséeauxdeuxconditionssuivantes:(1) l'appareilnedoitpasproduiredebrouillage,et(2) (2)l'utilisateurdel'appareildoitacceptertoutbrouillageradioélectriquesubi,mêmesilebrouillageestsusceptibled'encompromettrelefonctionnement.RFradiationsafetywarningsandthefollowing:AntennaSafeDistance,Rsafe,(cm)RSS‐102ControlledUseDevices(ControlledEnvironment)TQC‐150CII(5.5dBi)76AvertissementsdesécuritéradiologiqueRFetlesélémentssuivants:AntenneDistancedesécurité,Rsûr,(cm)RSS‐102Dispositifsd'utilisationcontrôlée(environnementcontrôlé)TQC-150CII (5.5dBi)76

Navigation menu