Hytera Communications PD98XU5 Digital Portable Radio User Manual
Hytera Communications Corporation Limited Digital Portable Radio Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3626459 |
| Application ID | ki4YfVzD2hcqE5N60bFRsg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 52.42kB (655259 bits) |
| Date Submitted | 2017-11-02 00:00:00 |
| Date Available | 2017-11-02 00:00:00 |
| Creation Date | 2017-10-27 15:28:09 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2017-11-02 10:48:24 |
| Document Title | Microsoft Word - PD982_Digital_Portable_Radio_User_Manual |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | SZ8115 |
Preface Thanks for your favor in our product. This manual provides guidance for you to quickly know how to use the product. This manual is applicable to the following product: PD982 U(5) Digital Portable Radio Copyright Information Hytera is the trademark or registered trademark of Hytera Communications Corporation Limited (the Company) in the People's Republic of China (PRC) and/or other countries or areas. The Company retains the ownership of its trademarks and product names. All other trademarks and/or product names that may be used in this manual are properties of their respective owners. The product described in this manual may include the Company's computer programs stored in memory or other media. Laws in PRC and/or other countries or areas protect the exclusive rights of the Company with respect to its computer programs. The purchase of this product shall not be deemed to grant, either directly or by implication, any rights to the purchaser regarding the Company's computer programs. The Company's computer programs may not be copied, modified, distributed, decompiled, or reverse-engineered in any manner without the prior written consent of the Company. Disclaimer The Company endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy or reliability is given. All the specifications and designs are subject to change without notice due to continuous technological development. No part of this manual may be copied, modified, translated, or distributed in any manner without the prior written consent of the Company. We do not guarantee, for any particular purpose, the accuracy, validity, timeliness, legitimacy or completeness of the third-party products and contents involved in this manual. If you have any suggestions or would like to receive more information, please visit our website at: http://www.hytera.com. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Compliance with RF Exposure Standards Hytera's radio complies with the following RF energy exposure standards and guidelines: United States Federal Communications Commission, Code of Federal Regulations; 47 CFR § 1.1307, 1.1310 and 2.1093 American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1:2005; Canada RSS102 Issue 5 March 2015 Institute of Electrical and Electronic Engineers (IEEE) C95.1:2005 Edition RF Exposure Compliance and Control Guidelines and Operating Instructions To control your exposure and ensure compliance with the occupational/controlled environmental exposure limits, always adhere to the following procedures. Guidelines: Do not remove the RF Exposure Label from the device. User awareness instructions should accompany device when transferred to other users. Do not use this device if the operational requirements described herein are not met. Operating Instructions: Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Push-To-Talk (PTT) key. To receive calls, release the PTT key. Transmitting 50% of the time, or less, is important because the radio generates measurable RF energy only when transmitting (in terms of measuring for standards compliance). Keep the radio unit at least 2.5 cm away from the face. Keeping the radio at the proper distance is important as RF exposure decreases with distance from the antenna. The antenna should be kept away from the face and eyes. When worn on the body, always place the radio in a Hytera-approved holder, holster, case, or body harness or by use of the correct clip for this product. Use of non-approved accessories may result in exposure levels which exceed the FCC's occupational/controlled environmental RF exposure limits. Use of non-approved antennas, batteries, and accessories causes the radio to exceed the FCC RF exposure guidelines. Contact your local dealer for the optional accessories of the product. ISEDC Statement The device has been tested and complies with SAR limits, users can obtain Canadian information on RF exposure and compliance. Après examen de ce matériel aux conformité aux limites DAS et/ou aux limites d’intensité de champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and compliance d’acquérir les informations correspondantes This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement Contents Documentation Information...................................................................................................................1 1. Packing List ........................................................................................................................................2 2. Product Overview ...............................................................................................................................3 2.1 Product Layout ................................................................................................................................3 3. Before Use ..........................................................................................................................................5 3.1 Attaching the Antenna.....................................................................................................................5 3.2 Installing the Micro-SD Card ...........................................................................................................5 3.3 Attaching the Battery.......................................................................................................................5 3.4 Attaching the Belt Clip.....................................................................................................................6 3.5 Attaching the Accessories...............................................................................................................6 3.6 Charging the Battery .......................................................................................................................7 4. Basic Operations ................................................................................................................................9 4.1 Turning the Radio On/Off ................................................................................................................9 4.2 Adjusting the Volume ......................................................................................................................9 4.3 Checking the Battery Power ...........................................................................................................9 4.4 Locking or Unlocking the Keypad ...................................................................................................9 4.5 Using the Keypad..........................................................................................................................10 4.6 Switching the Operation Mode ......................................................................................................10 4.7 Selecting a Zone and Channel (Conventioal) ...............................................................................11 4.8 Registering with BS (Trunking) .....................................................................................................11 5. Status Indication ..............................................................................................................................12 5.1 LCD Icon .......................................................................................................................................12 5.2 LED Indicator ................................................................................................................................14 6. Call Services .....................................................................................................................................15 6.1 Group Call .....................................................................................................................................15 6.2 Private Call ...................................................................................................................................17 6.3 Phone Call ....................................................................................................................................18 6.4 All Call...........................................................................................................................................20 6.5 Broadcast Call (Trunking Only) .....................................................................................................22 6.6 Include Call (Trunking Only) .........................................................................................................23 6.7 Call on Analog Channel (Conventional Only) ................................................................................23 7. Message Services ............................................................................................................................24 7.1 Viewing Messages ........................................................................................................................24 7.2 Sending Messages .......................................................................................................................24 7.3 Deleting Messages .......................................................................................................................25 8. Supplementary Features..................................................................................................................26 8.1 Basic Settings ...............................................................................................................................27 8.2 Contact Management....................................................................................................................29 8.3 Audio Optimization ........................................................................................................................30 8.4 MIC & SPK ....................................................................................................................................31 8.5 One Touch Call/Menu ...................................................................................................................32 8.6 Scan..............................................................................................................................................33 8.7 Hunt ..............................................................................................................................................34 8.8 Roam ............................................................................................................................................35 8.9 Talk Around ..................................................................................................................................35 8.10 Time-out Timer ...........................................................................................................................35 8.11 VOX ............................................................................................................................................35 8.12 Call Divert ...................................................................................................................................36 8.13 DGNA .........................................................................................................................................36 8.14 GPS ............................................................................................................................................36 8.15 Work Order .................................................................................................................................37 8.16 Data Query .................................................................................................................................38 8.17 Control Services..........................................................................................................................38 8.18 Analog Services ..........................................................................................................................39 8.19 Personal Safety Services ............................................................................................................40 8.20 Communication Security Services ..............................................................................................41 9. Troubleshooting ...............................................................................................................................44 10. Care and Cleaning ..........................................................................................................................46 10.1 Product Care ...............................................................................................................................46 10.2 Product Cleaning ........................................................................................................................46 11. Optional Accessories .....................................................................................................................47 Abbreviations .......................................................................................................................................48 Documentation Information Icon Conventions Icon Note Caution Description Indicates references that can further describe the related topics. Indicates situations that could cause data loss or equipment damage. Notational Conventions Item Description Example To save the configuration, click Denotes Boldface names, menus, window tabs, parameter names, dialogue Apply. The Log Level Settings dialogue appears. names, and hardware buttons. Press the PTT key. The Denotes messages, directories, file "" screen displays "Invalid Battery!". names, folder names, and parameter Open "PDT_PSS.exe". values. Go to "D:/opt/local". In the Port text box, enter "22". Directs you to access a multi-level menu. Go to File > New. For details about using the DWS, Italic Denotes document titles. refer to Dispatch Workstation User Guide. Denotes Courier New commands and execution results. their To set the IP address, run the following command: vos-cmd - m name IP 1. Packing List Please unpack carefully and check that you have received the following items. If any item is missing or damaged, please contact your dealer. Item Quantity (PCS) Item Quantity (PCS) Radio Antenna Battery Belt Clip Charger Strap Power Adapter User Manual Note Check whether the frequency band marked on the antenna label matches that on the radio label. If not, please contact your dealer. 2. Product Overview 2.1 Product Layout No. Part Name No. Part Name Side Key 1 (SK1) 12 LED Indicator Push-to-Talk (PTT) Key 13 Antenna Side Key 2 (SK2) 14 On-Off/Volume Control Knob Top Key (TK) 15 Accessory Connector Channel/Group Selector Knob 16 Back/Subgroup Key Microphone 17 P2/BackDial/End/Home Screen Key LCD Display 18 Up Key OK/Menu Key 19 Down Key P1/Answer/Redial/Call Key 20 Battery Latch 10 Speaker 21 Belt Clip 11 Numeric Keypad 22 Battery Note For enhanced convenience, you may request your dealer to program the TK, P1, P2, SK1, and SK2 as shortcuts to radio features. 3. Before Use 3.1 Attaching the Antenna Caution Rotate the antenna clockwise until hand tight; if over tightened, the antenna or its connector may be damaged. Do not hold the radio by its antenna as it may reduce the radio performance and life span of the antenna. 3.2 Installing the Micro-SD Card Install the Micro-SD card as follows if required: Step 1 Loosen the screw fixing the Micro-SD card cover, remove the cover, and then place the card in the holder correctly. Step 2 Put the cover back and tighten the screw. 3.3 Attaching the Battery Note Upon power-on, the radio automatically checks whether the battery is approved by the Company and gives a corresponding indication. Using an unapproved battery makes the battery power indication inaccurate and reduces the radio performance. 3.4 Attaching the Belt Clip Step 1 Unfasten the two screws on the back of the radio. Step 2 Align the screw holes on the belt clip with those on the back of the radio. Step 3 Tighten the screws. 3.5 Attaching the Accessories Caution: For optimal waterproof and dustproof performance: Do not scrape the silicone waterproof pad surrounding the screw hold of the accessory connector. Do close the accessory connector cover and fasten the screw after removing the accessory. Step 1 Loosen the screw fixing the accessory connector cover, and open the cover. Step 2 Align the accessory (such as an audio accessory or a programming cable) plug with the accessory connector. Step 3 Tighten the screw on the accessory plug. 3.6 Charging the Battery Caution: Use the charger specified by the Company to charge the battery. Charge the battery fully before initial use because reduction of state of charge may lead to low battery alarm. You can charge the standalone battery or the radio with battery attached. It is recommended that your radio remain powered off during charging. The LED indicator on the charger shows the charging status. For details, see the following table. LED Indication Charging Status Flashes red slowly The battery is inserted incorrectly. Glows red The battery is being charged. Glows orange The battery is charged to 90% or more. Glows green The battery is fully charged. LED Indication Flashes red rapidly Charging Status The battery fails to be charged. 4. Basic Operations 4.1 Turning the Radio On/Off 4.2 Adjusting the Volume 4.3 Checking the Battery Power You can check the current battery power by holding down the preprogrammed Battery Power Indicator key, and release the key to exit. Battery power indications and alert tone are listed below: Icon LED Indication/Tone The LED Indicator glows green. The LED Indicator glows orange. The LED Indicator glows red. The LED Indicator glows red and an alert tone sounds. The battery runs low. Please recharge or replace the battery. 4.4 Locking or Unlocking the Keypad When the keypad is not in use, it is recommended that you lock it to avoid unintended operations. To lock or unlock the keypad, do one of the following: Automatically lock or unlock the keypad The Keypad Lock feature allows the keypad to be locked automatically if no operation is performed within the preset time period. To enable this feature, go to Menu > Settings > Radio Set > Keypad Lock, select Enable, and set Delay Time(s) by pressing the Up or Down key. To disable this feature, select "Disable" under the "Keypad Lock" menu. Manually lock or unlock the keypad To manually lock or unlock the keypad, do one of the following on the home screen: Press the Keypad Lock key programmed by your dealer. Press the OK/Menu key and then press Note You can go to Menu > Settings > Radio Set > Optional Key to set whether the keys and knobs still function when the keypad is locked. 4.5 Using the Keypad You can use the keypad to enter user aliases or IDs and text messages. To switch the input method between alphabetic mode and numeric mode, press To enter special characters, press To enter the space, press in the alphabetic mode or in the numeric mode. in the alphabetic mode. 4.6 Switching the Operation Mode The radio can operate in conventional or trunking mode. In conventional mode, you can receive and transmit voice and data after selecting the required channel. In trunking mode, you can receive and transmit voice and data after the radio registers successfully. To manually switch the operation mode, do one of the following: Go to Menu -> Mode -> Manual Switch, select the required mode, and then press the OK/Menu key. Press the preprogrammed Operation Mode Switch key. To allow the radio to automatically switch to conventional mode when the signal drops below the preset level in trunking mode, go to Menu -> Mode -> Auto Switch, and then select Enable. 10 4.7 Selecting a Zone and Channel (Conventioal) In conventional mode, the radio receives and transmits data and voice on the selected channel. A zone is a group of channels within the same operational area. To select a zone and then a channel contained in it, do as follows: Step 1 Select a zone in one of the following ways: Go to Menu > Zone, and then select the required zone. Press the preprogrammed Zone Up or Zone Down key. Step 2 Select a channel in one of the following ways: Rotate the Channel Selector knob. Press the preprogrammed Channel Up or Channel Down key. 4.8 Registering with BS (Trunking) Upon power-on, the radio automatically hunts the control channels to find an available BS for registration. During hunting, the radio displays "Out of Range" with the icon , the LED indicator flashes orange slowly, and the radio emits the hunt tone. The radio automatically registers with the found BS for communication. If you want the radio to register with another BS, press the programmed Manual Current Hunt key to hunt again. 11 5. Status Indication 5.1 LCD Icon The following tables list icons that may appear on the radio's liquid-crystal display (LCD). Operation Mode Icons Icon Radio Status DM Direct Mode: The radio transmits and receives directly. RM Repeater Mode: The radio transmits and receives through a repeater. TDMA Direct Mode: If one time slot is occupied, the radio can transmit and receive TDMA through the other time slot. TM-DW Trunking Mode-Digital Wide: The radio operates under multiple interconnected BSs. TM-DL Trunking Mode-Digital Local: The radio operates under a single BS. The Mode Automatic Switch feature is enabled. Basic Status Icons Icon Radio Status The dual-tone multi-frequency signaling (DTMF) keypad is enabled. The number of bars indicates the charge left in the battery. There is no signal in conventional or TM-DW mode. The number of bars indicates the signal strength in conventional or TM-DW mode. There is no signal in TM-DL mode. The number of bars indicates the signal strength in TM-DL mode. The radio operates in high power mode. The radio operates in low power mode. An accessory is connected. The Global Positioning System (GPS) feature is enabled, and the radio receives GPS data. The GPS feature is enabled, but the radio receives no GPS data. 12 The radio is in emergency mode. The radio is roaming. The Scrambler or Encrypt feature is enabled. The radio is scanning or hunting. The radio stays on a non-priority channel. The radio stays on priority channel 1. The radio stays on priority channel 2. The Voice Operated Transmit (VOX) feature is enabled. The Monitor feature is enabled. The speaker is turned on. The radio operates in silent mode. The Loudness and Quality Optimizer (LQO) feature is enabled. Short Data Icons Icon Radio Status There is/are unread short message(s). The Inbox is full. There is/are unread work order(s). The work order list is full. Call Icons Icon Radio Status There is/are alert call(s). There is/are missed call(s). The Call Divert feature is enabled. A private call is in progress or a private contact is on the contact list. A group call is in progress or a group contact is on the contact list. An all call is in progress or an all call contact is on the contact list. 13 An include call is in progress. 5.2 LED Indicator To determine the radio status, check the LED indicator on the radio according to the following table: LED Indicator Flashes green Radio Status Being turned on. Flashes green slowly Standby in trunking mode. Glows green Receiving. Glows red Transmitting. Flashes red Establishing a call in trunking mode. This indication is applicable only to the calling radio. Flashes orange slowly Scanning, hunting, or roaming. Flashes orange rapidly Conventional mode: Working in emergency mode. Trunking mode: Establishing a Full Off Air Call Set-Up (FOACSU) call. This indication is applicable only to the called radio. Glows orange Call hang time: No voice is being transmitted or received on the channel during a call. Within such a period, you can press and hold the PTT key and speak. 14 6. Call Services You can initiate various types of calls in different manners. When initiating a call in Manual Dial manner in trunking mode, you need to enter a number complying with the dial rule. For the detailed dial rule, please consult your dealer. When you are speaking during a call, keep the microphone about 2.5 to 5 cm away from your mouth. This ensures optimal voice quality on the receiving radio. 6.1 Group Call A group call is a call from an individual user in a group to all the other members in the group. 6.1.1 Initiating Group Calls The following table describes how to initiate a group call in conventional mode and trunking mode. Mode Manner Preset Contact 1. Rotate the Channel Selector knob to select the channel associated with the required group contact. 2. Press and hold the PTT key. 1. Go to Menu > Contact > Contact List/Favorites. 2. Select the required group contact. 3. Press and hold the PTT key. 1. Go to Menu > Contact > Manual Dial. 2. Press 3. Enter the required group ID. 4. Press and hold the PTT key. Preset 1. Rotate the Group Selector knob to select the required group Contact contact. Contact Conventional List/Favorites Manual Dial Trunking Operation to switch the input mode to Group ID. 15 Mode Manner Favorites Operation 2. Press and hold the PTT key. 1. Go to Menu > Contact > Favorites. 2. Select the required group contact. 3. Press 1. Press the preprogrammed Subgroup key or go to Menu > or press and hold the PTT key. Subgroup. Subgroup Manual Dial 2. Select the required subgroup, and then select Member. 3. Select the required group contact. 4. Press 1. Go to Menu > Settings > Radio Set > Keypad Mode, and then or press and hold the PTT key. select Enable. 2. From the home screen, enter the group call number. 3. Press 1. From the home screen, press or or press and hold the PTT key. or (if preprogrammed as the ReDial/Back ReDial or BackDial key). Dial Call Log 2. Select the required group contact from the list. 3. Press 1. Go to Menu > Call Logs > Outgoing/Incoming > Outgoing Call Log or press and hold the PTT key. List/Incoming List. 2. Select the required group contact. 3. Press or press and hold the PTT key. 6.1.2 Receiving Group Calls When you receive a group call in conventional mode, the radio displays . The call is established after the call is established successfully. automatically. In trunking mode, the radio displays 6.1.3 Ending Group Calls In conventional mode and trunking mode, a group call automatically ends when the call hang time expires. In trunking mode, a group call also ends in any of the following cases: The calling party ends the call by pressing the End key or preprogrammed Clear Down key. The call duration preset by your dealer expires. 16 A preemptive or emergency call interrupts the call. The base station signal is lost. 6.2 Private Call A private call is a call from an individual user to another individual user. 6.2.1 Initiating Private Calls The following table describes how to initiate a private call in conventional mode and trunking mode. Mode Manner Operation 1. Preset Rotate the Channel Selector knob to select the channel associated with the required private contact. Contact 2. Press and hold the PTT key. 1. Go to Menu > Contact > Contact List/Favorites. Conventio List/Favorite 2. Select the required private contact. 3. Press and hold the PTT key. 1. Go to Menu > Contact > Manual Dial. 2. Press 3. Enter the required private ID. 4. Press and hold the PTT key. Preset 1. Rotate the Group Selector knob to select the required private contact. Contact 2. Press and hold the PTT key to initiate the call. Favorites/Pr 1. Go to Menu > Contact > Favorites/ Private Contact. ivate 2. Select the required private contact. Contact 3. Press 1. Go to Menu > Settings > Radio Set > Keypad Mode, and then select Contact nal Manual Dial Trunking Manual Dial ReDial/Back Dial Log Call to switch the input mode to Private ID. or press and hold the PTT key. Enable. 2. From the home screen, enter the private call number. 3. Press 1. From the home screen, press or or press and hold the PTT key. or (if preprogrammed as the ReDial or BackDial key). 2. Select the required private contact from the list. 3. Press or press and hold the PTT key. 17 Mode Manner 1. Conventio nal/ Operation Call Log Trunking Go to Menu > Call Logs > Outgoing/Incoming/Missed > Outgoing List/Incoming List/Missed List. 2. Select the required private contact. 3. Press or press and hold the PTT key. 6.2.2 Receiving Private Calls Conventional Mode When you receive a private call, the radio displays . The call is established automatically. Trunking Mode Depending on the system settings, you can answer a private call in one of the following ways: FOACSU When you receive a private call, the radio rings and vibrates, and displays . Press or press and hold the PTT key within the preset period to answer the call. After the call is established successfully, the radio displays Off Air Call Set-Up (OACSU) When you receive a private call, the radio displays . The call is established automatically. 6.2.3 Ending Private Calls In conventional mode and trunking mode, a private call automatically ends when the call hang time expires. In trunking mode, a private call also ends in any of the following cases: The calling or called party ends the call by pressing the End key or preprogrammed Clear Down key. The call duration preset by your dealer expires. A preemptive or emergency call interrupts the call. The base station signal is lost. 6.3 Phone Call In conventional mode, you can initiate a call to or receive a call from a Public Switched Telephone Network (PSTN) terminal. In trunking mode, you can initiate a call to or receive a call from a PSTN or Private Automatic Branch eXchange (PABX) terminal. 18 6.3.1 Initiating Phone Calls The following table describes how to initiate a phone call in conventional mode and trunking mode. Mode Manner Operation 1. Go to Menu > Phone > DTMF Keypad, and then select Enable. 2. Access the phone system in one of the following manner: If the One-Key Connect feature is enabled, press to transmit the connect code. Manual Dial If the One-Key Connect feature is not enabled, enter the preprogrammed connect code from the home screen, and then press and hold the PTT key. 3. Conventional After accessing the phone system successfully, the radio enters the DTMF Dial mode. 4. From the home screen, enter the phone number. 5. Press and hold the PTT key. 1. Enable the DTMF keypad and access the phone system as described in the first two steps above. Contact List 2. Go to Menu > Phone > Phone Contact, and then select the required phone contact. Preset Contact Favorites/Pri vate Contact Trunking Manual Dial Call Log 3. Press and hold the PTT key. 1. Rotate the Group Selector knob to select the required phone contact. 2. Press and hold the PTT key. 1. Go to Menu > Contact > Favorites/Private Contact. 2. Select the required phone contact. 3. Press 1. Go to Menu > Settings > Radio Set > Keypad Mode, and then or press and hold the PTT key. select Enable. 2. From the home screen, enter the phone number. 3. Press 1. Go to Menu > Call Logs > Outgoing/Incoming/Missed > or or press and hold the PTT key. Outgoing List/Incoming List/Missed List. 2. Select the required phone contact. 3. Press or press and hold the PTT key. 19 Mode Manner Operation 1. From the home screen, press or (if preprogrammed as the ReDial/Back ReDial or BackDial key). Dial Call Log 2. Select the required phone contact from the list. 3. Press or press and hold the PTT key. 6.3.2 Receiving Phone Calls Conventional Mode When receiving a phone call, you need to transmit the preprogrammed connect code to access the telephone system as described in 6.3.1 Initiating Phone Calls After the radio accesses the telephone system successfully, the call is established automatically. Trunking Mode When you receive a phone call, the radio displays . To answer the call, press or press and hold the PTT key within the preset period. After the call is established successfully, the radio displays 6.3.3 Ending Phone Calls In conventional mode, a phone call ends in any of the following cases: You transmit the preprogrammed disconnect code in the same way as the connect code. The phone user hangs up. In trunking mode, a phone call ends in any of the following cases: The calling or called party ends the call. The call duration exceeds the period preset by your dealer. A preemptive or emergency call interrupts the call. The base station signal is lost. 6.4 All Call Conventional Mode An all call is a call from an individual user to all other users on the current channel. Trunking Mode An all call is a call from an individual user to all other users in a specific BS, area, or system. According to whether the called party can respond, an all call is classified into the following two types: Broadcast All Call: The called party cannot respond to the call. 20 General All Call: The called party can respond to the call. To set the type, go to Menu > Settings > Radio Set > All Call, and then select Broadcast Call or General Call. 6.4.1 Initiating All Calls Your radio can initiate an all call only after being authorized by your dealer. The following table describes how to initiate an all call in conventional mode and trunking mode. Mode Manner Operation 1. Preset Contact Rotate the Channel Selector knob to select the channel associated with the all call contact. Convention 2. Press and hold the PTT key. al 1. Go to Menu > Contact > Contact List. 2. Select the all call contact. 3. Press and hold the PPT key. 1. Go to Menu > Settings > Radio Set > Keypad Mode, and then Contact List Manual Dial Trunking ReDial Call Log select Enable. 2. From the home screen, enter the all call number. 3. Press 1. From the home screen, press or or press and hold the PTT key. (if preprogrammed as the ReDial key). 2. Select the all call log from the list. 3. Press or press and hold the PTT key. 6.4.2 Receiving All Calls When you receive an all call, the radio displays , and the call is established automatically. 6.4.3 Ending All Calls In conventional mode and trunking mode, an all call ends when the Time-out Timer (TOT) expires. In trunking mode, an all call also ends in any of the following cases: The calling party ends the call. The call duration exceeds the period preset by your dealer. The base station signal is lost. 21 6.5 Broadcast Call (Trunking Only) A broadcast call is a special group call to which the called party cannot respond. Your radio can initiate a broadcast call only after being authorized by your dealer. 6.5.1 Initiating Broadcast Calls The following table describes how to initiate a broadcast call. Manner Favorites Subgroup Manual Dial Operation 1. Go to Menu > Contact > Favorites. 2. Select the required group contact, and then press the OK/Menu key. 3. Select Call Type, and then select Broadcast Call. 4. Press 1. Press the preprogrammed Subgroup key or go to Menu > Subgroup. 2. Select the required subgroup, and then select Member. 3. Select the required group contact, and then press the OK/Menu key. 4. Select Call Type, and then select Broadcast Call. 5. Press 1. Go to Menu > Settings > Radio Set > Keypad Mode, and then select or press and hold the PTT key. or press and hold the PTT key. Enable. 2. From the home screen, enter the broadcast call number. 3. Press 1. Go to Menu > Call Logs > Outgoing/Incoming > Outgoing List/Incoming or or press and hold the PTT key. List. Call Log 2. Select the required group contact, and then press the OK/Menu key. 3. Select Call Type, and then select Broadcast Call. 4. Press 1. From the home screen, press or press and hold the PTT key. or (if preprogrammed as the ReDial or BackDial key). ReDial/BackDial 2. Call Log key. Select the target group contact from the list, and then press the OK/Menu 3. Select Call Type, and then select Broadcast Call. 4. Press or press and hold the PTT key. 6.5.2 Receiving Broadcast Calls In conventional mode, when you receive a broadcast call, the radio displays 22 . The call is established automatically. In trunking mode, the radio displays after the call is established successfully. 6.5.3 Ending Broadcast Calls A broadcast call ends in any of the following cases: The calling party ends the call. The call duration exceeds the period preset by your dealer. A preemptive or emergency call interrupts the call. The base station signal is lost. 6.6 Include Call (Trunking Only) An include call is a special group call initiated to another group in call hang time of an ongoing group call, so that the group joins the ongoing call. Your radio can initiate an include call only after being authorized by your dealer. For operations of the include call, see "Group Call". 6.7 Call on Analog Channel (Conventional Only) You can initiate or receive a call on an analog channel with or without signaling. 6.7.1 Call Without Signaling A call without signaling is a call initiated to all the other users on an analog channel without signaling. To initiate a call without signaling, do as follows: Step 1 Rotate the Channel Selector knob to select the required channel. Step 2 Press and hold the PTT key, and speak into the microphone. 6.7.2 Call With Signaling On an analog channel with signaling, you can initiate a call to a specific contact on the channel. Do as follows: Step 1 Rotate the Channel Selector knob to select the required channel. Step 2 Press the OK/Menu key, and go to Contact > Contact List. Step 3 Select the required contact. Step 4 Press and hold the PTT key, and speak into the microphone. 23 7. Message Services The Message feature allows you to send and receive the following types of messages in trunking mode or on a digital channel in conventional mode: New messages: messages created using the keypad. Quick text messages: frequently used messages predefined by your dealer but editable. Status messages (trunking only): frequently used messages predefined by your dealer and not editable. 7.1 Viewing Messages To view a newly received message, directly press the OK/Menu key. To view a message from the Inbox, a sent message, or a saved message, go to Menu > Message > Inbox/Outbox/Drafts > Inbox List/Outbox List/Drafts List, and then select the required message. 7.2 Sending Messages 7.2.1 Sending New Messages Step 1 Go to Menu > Message > New Msg, and then type the text. Step 2 Press the OK/Menu key, and then select Send. Step 3 Select the required contact, and then press the OK/Menu key. Note Instead of directly sending the new message, you can also select Save in conventional mode or select Save to Drafts or Save to QuickText in trunking mode to save the new message, and send it later. 7.2.2 Sending Quick Text Messages Step 1 Go to Menu > Message > Quick Text, and then select the required quick text message. Step 2 (Optional) Edit the message, and then press the OK/Menu key. Step 3 Select Send, and then select the required contact. Step 4 Press the OK/Menu key. 7.2.3 Sending Status Messages Step 1 Go to Menu > Message > Status Msg, and then select the required status message. 24 Step 2 Press the OK/Menu key, and then select the required contact. Step 3 Press the OK/Menu key. 7.3 Deleting Messages To delete a message from the InBox, OutBox, or Drafts, do as follows: Step 1 Go to Menu > Message > InBox/OutBox/Drafts > Inbox List/Outbox List/Drafts List. Step 2 Select the required message, and then press the OK/Menu key. Step 3 Select Delete, and then press the OK/Menu key. To delete all messages from the InBox, OutBox, or Drafts, do as follows: Step 1 Go to Menu > Message > InBox/OutBox/Drafts. Step 2 Select Delete All, and then press the OK/Menu key. 25 8. Supplementary Features The supplementary features of the radio vary with the operation mode. For details, see the following table. Conventional Feature Trunking Digital Analog Basic Settings √ √ √ Contact Management √ √ √ Mic Automatic Gain Control (AGC) √ √ √ Treble Boost √ √ √ 3-Band Equalizer √ √ √ LQO √ √ √ Audio Feedback Suppression √ × √ MIC & SPK √ √ √ One Touch Call/Menu √ √ √ Scan √ √ × Hunt × × √ Roam √ × √ Talk Around √ √ × Time-out Timer √ √ √ VOX √ √ √ Call Divert × × √ Call Priority × × √ Dynamic Group Number Assignment (DGNA) × × √ GPS √ √ √ Work Order √ × √ 26 Conventional Feature Trunking Digital Analog Data Query × × √ Control Services √ × × Analog Services × √ × Personal Security Services √ √ √ Encrypt √ × √ Scrambler × √ × Erasing Data in Emergency √ √ √ Stun × √ √ Kill √ × √ 8.1 Basic Settings You can go to Menu > Settings > Radio Set and then do the following operations: If you want to... Set the language Turn the power-on password on or off Then... Select Language, and then select the required language. 1. Go to Password > On/Off, and then select On or Off. 2. Enter the password (88888888 by default), and then press the OK/Menu key. Change the password 1. Go to Password > Password Set. 2. Enter the old password (88888888 by default), and then press the OK/Menu key. 3. Enter the new password under Input Password and Checkout, and then press the OK/Menu key. Select Battery. Verify the battery The radio displays "Certificated Battery" if the battery is an authorized one. Set the backlight Select Backlight, and select one of the following as required: Off: The backlight remains off. 27 If you want to... Then... On: The backlight remains on. Timed: The backlight will automatically be off if no operation or activity is performed within the preset period. Adjust the brightness of the backlight Select Brightness, and then press the Up or Down key. Set the LCD mode Select Day/Night, and then select Day Mode or Night Mode. Turn the LED indication on or off Select LED, and then select Enable or Disable. Turn the silent mode on or off Go to Tone > Radio Silent, and then select Silent On or Silent Off. Turn a specific tone on or off Adjust the volume of a specific tone Turn the Vibration feature on or off Select Tone, and then select the required tone. Select On/Off, and then select Enable or Disable. Select Tone, and then select the required tone. Select Tone Volume, and then select the required level. Go to Vibration > On/Off, and then select Enable or Disable. Select Vibration, and then select the required vibration type. Set a specific vibration type Select Settings, and then set Duration, Cycles, or Interval Time as required. Select Power Level, and then select one of the following as required: Adjust the power level High Power: Enables long-distance communication but consumes more battery power. Low Power: Enables short-distance communication and saves battery power. 1. Set the time zone Go to Date & Time > Time Zone, and then press the OK/Menu key. 2. Press the Up or Down key to change the time zone, and then press the OK/Menu key. Set the time format (trunking only) Go to Date & Time > Time Format, and then select 24 Hour or 12 Hour. Check the remaining rental period Go to Rent > Rent Query. 28 If you want to... Turn all visible and audible indications off Allow or disallow the radio to send its alias during voice transmission Then... Select Covert Mode, and then select On. Select Send Alias, and then select On or Off. 8.2 Contact Management 8.2.1 Adding Contacts You can add a contact to the following lists: Conventional: Contact, Phone Contact, and Favorites Trunking: Private Contact and Favorites Adding Contacts to the Contact List or Phone Contact List Step 1 Go to Menu > Contact/Phone > New Contact > Input ID/Edit ID. Step 2 Enter the ID, and then press the OK/Menu key. Step 3 Select Input Alias/Edit Alias, and enter the alias. Step 4 Press the OK/Menu key, and then select Save. Adding Contacts to the Private Contact List Step 1 Go to Menu > Contact > New Contact > Input ID. Step 2 Enter the ID, and then press the OK/Menu key. Step 3 Select the contact type (Private ID, PABX, or PSTN). Step 4 Select Input Alias, and enter the alias. Step 5 Press the OK/Menu key, and then select Save. Adding Contacts to the Favorites List To add a frequently used contact to the Favorites list, do as follows: In conventional mode, go to Menu > Contact > Favorites > Add Contact, and then select the required contact. In trunking mode, go to Menu > Contact > Favorites > Folder Management > Add Contact, and then select the required contact. 8.2.2 Deleting Contacts To delete a contact from Favorites list, Phone Contact list (conventional only), and Private Contact list 29 (trunking only), do as follows: Step 1 Select the required contact from the corresponding list. Step 2 Select Delete or Del Contact, and then press the OK/Menu key. 8.2.3 Creating Folders Under Favorites (Trunking Only) Step 1 Go to Menu > Contact > Favorites > Folder Management > Add Folder. Step 2 Use the keypad to enter the folder name, and then press the OK/Menu key. After creating the folder, you can go to Folder Management > Add Contact under the folder to add contacts to the folder. 8.3 Audio Optimization The features described in this section help optimize voice quality. 8.3.1 Turning the Mic AGC feature On or Off The Mic AGC feature allows the radio to automatically keep the microphone gain within a proper range during transmission. This provides optimized voice with proper volume for the receiving party. To turn this feature on or off, go to Menu > Settings > Audio Set > Digital Mic AGC/Analog Mic AGC, and then select On or Off. 8.3.2 Turning the Treble Boost feature On or Off The Treble Boost feature allows the radio to output louder voice for better audio clarity. To turn this feature on or off, go to Menu > Settings > Audio Set > Audio Optimization > Treble Boost, and then select On or Off. Note If this feature is enabled, the LQO feature and 3-Band Equalizer feature are unavailable. 8.3.3 Setting the 3-Band Equalizer Feature The 3-Band Equalizer feature allows the radio to automatically adjust the sound effect of received voice according to preset frequency gains. To turn this feature on or off, go to Menu > Settings > Audio Set > Audio Optimization > 3-Band Equalizer > Equalizer Switch, and then select On or Off. To set the low, mid, or high frequency gain, do as follows: Step 1 Go to Menu > Settings > Audio Set > Audio Optimization > 3-Band Equalizer > Low Freq. Gain/Mid Freq. Gain/High Freq. Gain, and then press the OK/Menu key. 30 Step 2 Press the Up or Down key to change the value, and then press the OK/Menu key. It is recommended that you set the frequency gains according to the following table: Scenario Low Frequency Gain (dB) Mid Frequency Gain (dB) High Frequency Gain (dB) Square Indoor 3.5 1.5 –1.5 Downtown 2 8.3.4 Turning the LQO Feature On or Off The LQO feature allows the radio to automatically adjust the volume and improve the quality of received voice in different environments. To turn this feature on or off, go to Menu > Settings > Audio Set > LQO, and then select On or Off. 8.3.5 Turning the Audio Feedback Suppression Feature On or Off The Audio Feedback Suppression feature helps reduce the noises arising from short-distance communication. To turn this feature on or off, go to Menu > Settings > Audio Set > Audio Feedback Suppressors, and then select On or Off. 8.4 MIC & SPK The MIC & SPK feature allows you to select the microphone and speaker used by the radio for transmitting and receiving voice. 8.4.1 Selecting the Microphone To set the way in which the radio uses the external or internal microphone, go to Menu > Settings > Radio Set > MIC & SPK > MIC Selection, and then select one of the following as required: Follow PTT: When you transmit by pressing and holding the radio's PTT key, the radio uses the internal microphone; When you transmit by pressing and holding the PTT key on external device, it uses the external microphone. Only Internal: The radio uses only the internal microphone. Only External: The radio uses only the external microphone. External First: When an audio accessory is connected, the radio uses the external microphone; otherwise, it uses the internal microphone. 31 8.4.2 Selecting the Speaker To set the way in which the radio uses the external or internal speaker, go to Menu > Settings > Radio Set > MIC & SPK > SPK Selection, and then select one of the following as required: External First: When an audio accessory is connected, the radio uses the external speaker; otherwise, it uses the internal speaker. Only Internal: The radio uses only the internal speaker. Only External: The radio uses only the external speaker. 8.5 One Touch Call/Menu The One Touch Call/Menu feature allows you to press the preprogrammed One Touch Call/Menu key to quickly access a service assigned by your dealer. The services available for assignment are as follows: Service Type Description Analog Channel: Call to a 5-tone or 2-tone contact. Digital Channel: Voice and data services Group call, quick text or GPS message to a group contact. Private call, radio check, remote monitor, radio enable, radio disable, quick text message, alert call, or GPS message to a private in conventional mode contact. All call to an all call contact. Note: To initiate a one touch call on the digital channel in conventional mode, you need to press the PTT key after pressing the preprogrammed One Touch Call/Menu key. Private call, emergency call, preemptive call, text or status message to a private contact. Voice and data services Group call, broadcast call, emergency call, preemptive call, in trunking mode preemptive broadcast call, emergency broadcast call, text or status message to a group contact. Menu All call to an all call contact. Direct access to the designated menu. Check with your dealer for specific menus. 32 Note If the preprogrammed One Touch Call/Menu key is a numeric key, you need to go to Menu > Settings > Radio Set > Keypad Mode, and then select One Touch Call/Menu. 8.6 Scan In conventional mode, the Scan feature allows you to listen to activities on other channels, keeping track of your team members. With this feature enabled, the radio searches the scan list preset for the current channel and stays on a channel with activities. 8.6.1 Turning the Scan Feature On or Off To turn the Scan feature on or off, go to Menu > Scan > Scan On/Off, and then select On or Off. With the Scan feature enabled, the radio displays , and the LED indicator slowly flashes orange. When detecting activities on a channel, the radio stays on it, and the LED indicator glows green. Note If you do not want to listen to the activities on a channel, press the preprogrammed Nuisance Temporary Delete key to temporarily remove the channel from the scan list. 8.6.2 Adding a Channel to a Scan List Step 1 Go to Menu > Scan > Scan List, and then select the required scan list. Step 2 Select Edit/View, and then select Add CH. Step 3 Select the required channel. 8.6.3 Setting a Priority Channel You can set a channel on the scan list as priority channel 1 or 2, which will be scanned with priority than a non-priority channel. To set a priority channel, do as follows: Step 1 Go to Menu > Scan > Scan List, and then select the required scan list. Step 2 Select Edit/View, and then select the required channel. Step 3 Select Edit Prio CH > Set PrioCH-1/Set PrioCH-2. To change a priority channel to a non-priority channel, select the priority channel marked with , and then select Edit Prio CH > Disable PrioCH. 8.6.4 Deleting a Channel from a Scan List Step 1 Go to Menu > Scan > Scan List, and then select the required scan list. 33 or Step 2 Select Edit/View, and then select the required channel. Step 3 Select Delete CH. 8.7 Hunt In trunking mode, the radio must register with a BS for normal operation. The Hunt feature allows the radio to: Hunt through the Trunked Station Control Channels (TSCCs) for an available BS for registration. Always work under a BS with higher signal strength after registration, ensuring smooth communication. 8.7.1 Selecting the Mode for Fixed TSCC Hunt If the radio is preprogrammed by your dealer to use the Fixed TSCC hunt for registration, you can go to Menu > Hunt > TSCC Hunt, and then select one of the following modes as required: Comprehensive Hunt: allows the radio to hunt all TSCCs within the preset frequency range. Short Hunt: allows the radio to hunt the TSCCs in the fixed TSCC list predefined by your dealer. Team Hunt: allows the radio to hunt the TSCCs in the team hunt list predefined by your dealer. 8.7.2 Turning the Background Hunt Feature On or Off The Background Hunt feature allows the radio in standby mode to keep detecting the signal strength of the current BS. If the signal strength drops below the preset threshold, the radio switches to another BS with higher signal strength. To turn this feature on or off, go to Menu > Hunt > Background Hunt, and then select Enable or Disable. 8.7.3 Turning the Homestation Hunt Feature On or Off The Homestation Hunt feature allows the radio operating on another channel to switch back to the homestation channel if the signal strength of the homestation channel reaches the preset threshold. This ensures smooth communication in an overlapping area. It is recommended that you request the dealer to set the frequently used channel as the homestation channel and enable this feature. To turn this feature on or off, go to Menu > Hunt > Homestation Hunt, and then select Enable or Disable. 8.7.4 Turning the Handover Feature On or Off The Handover feature allows the radio to automatically switch to another BS with higher signal strength if the signal strength of the current BS drops below the preset threshold during a call. This prevents call 34 drops or discontinuous voice caused by low signal strength. To turn this feature on or off, go to Menu > Hunt > Handover > Handover On/Off, and then select Enable or Disable. 8.8 Roam The Roam feature allows you to enjoy seamless communication across sites or networks. In conventional mode, you can turn this feature on or off as follows: Step 1 Go to Menu > Roam > Roam On/Off. Step 2 Select On or Off. In trunking mode, only your dealer can turn on or off this feature. 8.9 Talk Around The Talk Around feature allows your radio to continue transmitting and receiving when the repeater is not operating, or when your radio is out of the repeater's coverage but within other radio's coverage. To turn this feature on or off, go to Menu > Settings > Radio Set > Talk Around, and then select Enable or Disable. 8.10 Time-out Timer The Time-out Timer (TOT) feature allows the radio to automatically stop transmission and keep beeping when the period preset by your dealer expires. To stop beeping, release the PTT key. You need to wait for a certain period (also preset by your dealer) to initiate transmission again. This feature aims to prevent a radio user from occupying a channel for an extended period. It also avoids potential radio damage caused by overheating. 8.11 VOX The VOX feature allows you to transmit voice without pressing and holding the PTT key. The radio automatically transmits voice when the volume reaches the preset level. To turn this feature on or off, go to Menu > Settings > Radio Set > VOX > On/Off, and then select On or Off. When this feature is enabled, the radio displays After enabling this feature, you can set the sensitivity of the external or internal microphone. Do as follows: Step 1 Go to Menu > Settings > Radio Set > VOX > Gain Level > External/Internal. 35 Step 2 Select the appropriate level. A higher gain level indicates lower sensitivity, which requires higher volume for triggering transmission. 8.12 Call Divert The Call Divert feature allows you to divert an incoming half-duplex private call to a designated radio. To turn this feature on, do as follows: Step 1 Go to Menu > Settings > Radio Set > Call Divert > On/Off, and then select On. Step 2 Select Divert ID, and enter the ID. Step 3 Press the OK/Menu key. To turn this feature off, select Off under Call Divert. 8.13 DGNA The DGNA feature allows you to join a dynamic group added by the authorized dispatcher over the air interface according to temporary task requirements. The dispatcher can also delete the dynamic group from your radio. The radio displays "DGNA Success!" when the dynamic group is added successfully and "DGNA Deleted" when the dynamic group is deleted. The added dynamic group is saved on a dynamic subgroup list under Subgroup on your radio. 8.14 GPS The GPS feature allows you to view your location information, query location information of another radio user, and send your location information to the dispatch station or another radio. 8.14.1 Turning the GPS Feature On or Off In conventional mode, go to Menu > Accessories > GPS > GPS On/Off, and then select On or Off. In trunking mode, only your dealer can turn on or off this feature. 8.14.2 Viewing Location Information You can view location information of your radio and another radio. Viewing Location Information of Your Radio Go to Menu > Accessories > GPS > Position. Viewing Location Information of Another Radio Trunking Mode 36 To view location information of the nearest radio in a designated group, go to Menu > Accessories > GPS > Query Neighbors > Group Contact, and then select the required group contact. Digital Channel in Conventional Mode To view the location information of another radio, go to Menu > Accessories > GPS > Query Location > Contact List, and select the required private contact. 8.14.3 Sending Location Information In conventional mode, you can send your location information to the required contact as follows: Step 1 Go to Menu > Accessories > GPS > Position, and then press the OK/Menu key. Step 2 Select Contact List, and then select the target contact. In trunking mode, you can send your location information to the dispatch station as follows: Step 1 Go to Menu > Accessories > GPS > Msg with Position. Step 2 Edit the message, and then press the OK/Menu key. 8.14.4 Turning the Voice with GPS Feature On or Off The Voice with GPS feature allows the radio to automatically send GPS data during voice transmission. To turn this feature on or off, go to Menu > Accessories > GPS > Voice with GPS, and then select Enable or Disable. 8.15 Work Order The Work Order feature allows you to receive a task from the dispatcher and report the latest task state to the dispatcher at each stage of the task. 8.15.1 Viewing a Task To view a task in any state, go to Menu > Work Orders > All Task, select the required task, and then select Details. To view a task that has not been processed, go to Menu > Work Orders > New Task, select the required task, and then select Details. After a task is processed and the task state is updated, the task is moved from the New Task list to the list of the corresponding state. To view a task in a specific state, do as follows: Step 1 Go to Menu > Work Orders, and then select the corresponding list. Step 2 Select the required task, and then select Details. 37 8.15.2 Reporting the Task State To report the latest state of a task, do as follows: Step 1 Select the required task as described above. Step 2 Select the state to be reported, and then press the OK/Menu key. If the corresponding task state is associated with a numeric key by your dealer, you can also press the numeric key to report the state after selecting the required task. 8.16 Data Query The Data Query feature allows you to query related information from a third party by sending the keyword, for example, a vehicle number. To query information, do as follows: Step 1 Go to Menu > Query, and then select the required item. Step 2 Enter the keyword, and then press the OK/Menu key. Step 3 (Optional) Enter the password for data query, and then press the OK/Menu key. 8.17 Control Services On a digital channel in conventional mode, you can initiate the following control services to a private contact. Feature Description Operation Allows you to alert a Alert Call To trigger the corresponding feature, do one of the following: private contact to call you back. Through Favorites/Contact List 1. Go to Menu > Contact > Favorites/Contact List. check 2. Select the target private contact. whether another radio is 3. Go to Ctrl Services > Alert Call/Radio Check/Remote operating on the current Monitor/Radio Enable/Radio Disable. channel without disturbing that radio user. 1. Allows you to remotely and then select Enable. Remote monitor activities 2. Press Monitor surrounding another 3. From the home screen, enter the target private ID, and Allows Radio Check radio. you to Through Keypad Mode Go to Menu > Settings > Radio Set > Keypad Mode, to switch the input mode to Private ID. then press the OK/Menu key. 38 Feature Radio Enable Description Operation Go to Ctrl Services > Alert Call/Radio Check/Remote Allows you to remotely 4. enable a disabled radio Monitor/Radio Enable/Radio Disable. for normal operation. Radio Allows you to remotely Disable disable another radio. 8.18 Analog Services The following features are available only on an analog channel in conventional mode. 8.18.1 Turning the Compandor Feature On or Off The Compandor feature allows the radio to compress transmitted voice signals, which suppresses ambient noise and improves audio quality. To turn this feature on or off, go to Menu > Settings > Radio Set > Compandor, and then select Enable or Disable. 8.18.2 Turning the Monitor Feature On or Off The Monitor feature allows the radio to receive weak signals. To turn this feature on, press the preprogrammed Monitor key or press and hold the preprogrammed Monitor Momentary key. In this case, the radio displays To turn this feature off, press the preprogrammed Monitor key again or release the preprogrammed Monitor Momentary key. 8.18.3 Turning the Squelch Off Feature On or Off The Squelch Off feature allows the radio's speaker to keep turned on no matter whether the squelch condition is satisfied. To turn this feature on, press the preprogrammed Squelch Off key or press and hold the preprogrammed Squelch Off Momentary key. In this case, the radio displays To turn this feature off, press the preprogrammed Squelch Off key again or release the preprogrammed Squelch Off Momentary key. 8.18.4 Setting the Squelch Level The squelch level refers to the squelch threshold required for the radio's speaker to be turned on. To set the squelch level, go to Menu > Settings > Radio Set > Squelch, and then select Open, Normal, 39 or Tight (from low to high) as required. Generally, a higher squelch level requires higher signal strength. If the squelch level is set to Open, the speaker will always keep turned on. 8.18.5 Setting the CTCSS/CDCSS Feature The Continuous Tone-Coded Squelch System (CTCSS)/Continuous Digital-Coded Squelch System (CDCSS) feature allows the radio to filter out unwanted voice on the current channel. With this feature enabled by your dealer, the radio's speaker is turned on only when the CTCSS/CDCSS code received matches the CTCSS/CDCSS code set for the radio. To set the CTCSS/CDCSS type and code, go to Menu > Programming > Channel > TX CTCSS/CDCSS/RX CTCSS/CDCSS. 8.19 Personal Safety Services The features described in this section ensure personal safety. 8.19.1 Using the Emergency Feature The Emergency feature allows you to ask for help from your companion or the control centre in case of emergency. In emergency mode, the radio gives different indications according to the preset emergency type. The available emergency types are as follows: Emergency Type Description Siren Only The radio sounds shrill alarm tones with visible indications. Regular The radio gives audible and visible indications. Silent The radio gives no audible or visible indication, and you cannot listen to a received call. Silent w/ Voice The radio gives no audible or visible indication, but you can listen to a received call. Alarm w/ Siren The radio sends an alarm and sounds shrill alarm tones with visible indications. In addition, you can request your dealer to set one of the following emergency modes: Emergency Mode Description Alarm Allows you to send an emergency alarm. Call Only Allows you to initiate an emergency call. Alarm W/Call Allows you to send an emergency alarm and initiate an emergency call. 40 The three emergency modes can be combined with any of the following emergency types: Regular, Silent, and Siren w/ Voice. 8.19.2 Triggering the Emergency Mode To trigger the emergency mode, press the preprogrammed Emergency On key. The radio then enters the preset emergency mode with or without indications depending on the preset emergency type. In trunking mode, you can also initiate an emergency call as follows: Step 1 Go to Menu > Contact > Favorites, and then select the required group contact. Step 2 Select Call Type, and then select Emergency Call. Step 3 Press and hold the PTT key to initiate the call. If the Call to Follow feature is enabled by your dealer, the radio will transmit automatically. You can directly speak into the microphone in the preset period. 8.19.3 Exiting the Emergency Mode To exit the emergency mode (as the initiating party) or emergency alert mode (as the receiving party), press the preprogrammed Emergency Off key or turn the radio off. 8.19.4 Turning the Man Down Feature On or Off The Man Down feature allows the radio to enter the emergency mode when it tilts at an angle greater than the specified angle or stays motionless for a preset period. To turn this feature on or off, go to Menu > Settings > Radio Set > Man Down, and then select Enable or Disable. 8.19.5 Turning the Lone Worker Feature On or Off The Lone Worker feature allows the radio to enter the emergency mode when no operation is detected for a preset period. To turn this feature on or off, go to Menu > Settings > Radio Set > Lone Worker, and then select Enable or Disable. 8.20 Communication Security Services The features described in this section ensure communication security. 8.20.1 Using the Encrypt Feature The Encrypt feature prevents eavesdropping and ensures communication privacy. It allows the radio to automatically encrypt transmitted voice or data. Only the receiving radio with the same key value or ID can decrypt the voice or data. 41 8.20.2 Turning the Encrypt Feature On or Off Go to Menu > Settings > Radio Set > Encrypt > On/Off, and then select On or Off. Setting the Encrypt Key (Conventional Only) You can add, edit, or select an encrypt key. Adding an Encrypt Key Go to Menu > Settings > Radio Set > Encrypt > New Key, set the related parameters, and then select Save. The related parameters are as follows: Key ID: a unique key index ranging from 1 to 255. Key Alias: a string containing up to 16 characters. Key Length: the number (10, 32, or 64) of characters in the key. Key Value: a string containing digits and letters A to F. Selecting an Encrypt Key Step 1 Go to Menu > Settings > Radio Set > Encrypt > Key List. Step 2 Select the required key, and then select Select. Editing an Encrypt Key Step 1 Go to Menu > Settings > Radio Set > Encrypt > Key List. Step 2 Select the required key, and then select Edit. Step 3 Edit the ID, alias, or value, and then select Save. Selecting Encrypted Service (Trunking Only) In trunking mode, you can set which kind of service will be encrypted. Do as follows: Step 1 Go to Menu > Settings > Radio Set > Encrypt > Encrypt Service. Step 2 Select Only Voice, Only Data, or Voice and Data as required. 8.20.3 Turning the Scrambler Feature On or Off The Scrambler feature allows the radio to invert the frequency spectrum of transmitted audio signals. Only the receiving radio with the same scrambler setting can restore the audio signals. This prevents eavesdropping and ensures communication privacy. To turn this feature on or off, go to Menu > Settings > Radio Set > Scrambler, and then select Enable or Disable. 42 8.20.4 Erasing Data in Emergency In case of emergency, you can erase encryption data from the radio to prevent the data from unauthorized access. To erase the data, press the SK1 and PTT key by turns twice, and make sure the press interval is less than 1.5 seconds. Then, press SK1 to confirm. 8.20.5 Restoring the Stunned Radio When being stunned, the radio displays "Radio Stunned!" In this case, you cannot initiate services such as call or message services. To restore normal operation, request your dealer to program the radio or send a Revive command. When being enabled by a Revive command, the radio displays "Revive Success!" 8.20.6 Restoring the Killed Radio When being killed, the radio displays "Radio Killed!" In this case, you can only turn the radio on or off. To restore normal operation, request your dealer to burn the radio firmware. 43 9. Troubleshooting Phenomena Analysis Solution The battery may be installed improperly.Remove and reattach the battery. You cannot turn The battery power may run out. The battery may suffer from poor the radio on. contact caused by dirty or damaged battery contacts. Recharge or replace the battery. Clean the battery contacts or replace the battery. The radio may not be detecting signals Make sure the radio is within the coverage of from the BS. the BS. The radio cannot Contact the BS manager to check if the radio register. The radio may not be authorized. is authorized in the network management system. The battery voltage may be low. During receiving, The volume level may be low. Recharge or replace the battery. Increase the volume. the voice is weak The antenna may be loose or may be Turn the radio off, and then remove and or intermittent. installed incorrectly. reattach the antenna. The speaker may be blocked. Clean the surface of the speaker. The frequency or signaling type may be Verify that your TX/RX frequency and You cannot inconsistent with that of other members. signaling type are correct. communicate with The channel type (digital or analog) may Verify that you are on the correct digital or other group be set incorrectly. members. analog channel. You may be too far away from other members. Move towards other members. You may be interrupted by radios using Change the frequency, or adjust the squelch You hear unknown the same frequency. voices or noise. level. The radio in analog mode may be set Request your dealer to set signaling for the with no signaling. current channel to avoid interference. You are unable to You may be too far away from other Move towards other members. 44 Phenomena Analysis hear anyone members. because of too noise and much hiss. Solution You may be in an unfavourable position. For example, your communication may Move to an open and flat area, restart the be blocked by high buildings or blocked radio, and try again. in an underground area. It may be the result of external disturbance (such as electromagnetic interference). The GPS cannot locate your position. The called due to unfavourable position. interference. Move to an open and flat area, and try again. party disconnects repeatedly The radio may not receive GPS signals Stay away from equipment that may cause during The signal may be intermittent or weak. Make sure the radio is within the coverage of the BS. communication. You cannot use the keys. The keypad may not work temporarily. Restart the radio. The LCD does not display any The LCD may not work temporarily. Restart the radio. information. The radio registers repeatedly. The radio cannot establish a call. The unclear. voice is Make sure the radio is within the coverage of The signal may be intermittent. the BS. Make sure the radio is within the coverage of The signal may be weak. the BS. Make sure call participants are within the The signal may be weak. communication range. If the above solutions cannot fix your problems, or you may have some other queries, please contact your dealer for more technical support. 45 10. Care and Cleaning To guarantee optimal performance as well as a long service life of the product, please follow these tips. 10.1 Product Care Do not pierce or scrape the product. Keep the product far away from substances that can corrode the circuitry. Do not hold the product by the antenna or earpiece cable. Close the accessory connector cover when no accessory is in use. 10.2 Product Cleaning Caution Turn the product off and remove the battery before cleaning. Clean up the dust and fine particles on the product surface and charging piece with a clean and dry lint-free cloth or a brush regularly. Use neutral cleanser and a non-woven fabric to clean the keys, knobs, and front case after long-time use. Do not use chemical preparations such as stain removers, alcohol, sprays or oil preparations, so as to avoid surface case damage. If the radio is used in a harsh environment (such as sea and salt frog), periodically clean and dry the radio. Make sure the product is completely dry before use. 46 11. Optional Accessories Contact your local dealer for the optional accessories used with the product. Caution Use the accessories specified by the Company only; otherwise, the Company will not be liable for any loss or damage arising out of the use of any unauthorized accessories. 47 Abbreviations Abbreviation Full Name AGC Automatic Gain Control BS Base Station CDCSS Continuous Digital-coded Squelch System CTCSS Continuous Tone-coded Squelch System DGNA Dynamic Group Number Assignment DTMF Dual-tone Multi-frequency FOACSU Full Off Air Call Set-up GPS Global Positioning System LCD Liquid-crystal Display LED Light-emitting Diode LQO Loudness and Quality Optimizer OACSU Off Air Call Set-up PABX Private Automatic Branch eXchange PSTN Public Switched Telephone Network PTT Push-to-Talk SK Side Key TM-DL Trunking Mode-Digital Local TM-DW Trunking Mode-Digital Wide TK Top Key TOT Time-out Timer TSCC Trunked Station Control Channel VOX Voice Operated Transmit 48
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : SZ8115 Create Date : 2017:10:27 15:28:09+08:00 Modify Date : 2017:11:02 10:48:24-07:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : SZ8115 Title : Microsoft Word - PD982_Digital_Portable_Radio_User_Manual Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2017:11:02 10:48:24-07:00 Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:fe4e48dd-31d3-4b5a-9cea-545b3cf254af Instance ID : uuid:2bc41c1b-c604-4fca-a443-b2ee3c41afbf Page Count : 54EXIF Metadata provided by EXIF.tools