Hytera Communications RCS-01 Motorcycle Wireless Console User Manual

Hytera Communications Corporation Limited Motorcycle Wireless Console

User manual

1PrefaceWelcome to the world of Hytera and thank you for purchasing this product. To derive optimum performance from the product, please carefully read this manual before use. This manual is applicable to the following product:RCS-01 Motorcycle Wireless ConsoleIcon ConventionsThe following icons are available through this manual: Caution: indicates situations that could cause damage to your product or bodily injury. Note:  indicates tips that can help you make better use of your product. Copyright InformationHytera is the trademark or registered trademark of Hytera Communications Corporation Limited (the Company) in the People's Republic of China (PRC) and/or other countries or areas. The Company retains the ownership of its trademarks and product names. All other trademarks and/or product names that may be used in this manual are properties of their respective owners. The product described in this manual may include the Company's computer programs stored in memory or other media. Laws in PRC and/or other countries or areas protect the exclusive rights of the Company with respect to its computer programs. The purchase of this product shall not be deemed to grant, either directly or by implication, any rights to the purchaser regarding the Company's computer programs. The Company's computer programs may not be copied, modied, distributed, decompiled, or reverse-engineered in any manner without the prior written consent of the Company.DisclaimerThe Company endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy or reliability is given. All the specifications and designs are subject to change without notice due to continuous technological development. No part of this manual shall be copied, modified, translated, or distributed in any manner without the
2express written permission of us. We do not guarantee, for any particular purpose, the accuracy, validity, timeliness, legitimacy or completeness of the third-party products and contents involved in this manual.If you have any suggestions or would like to receive more information, please visit our website at: http://www.hytera.com.Instructions ●The use of the product is subject to the laws and regulations of the countries or regions in which it is used. ●To avoid suboptimal performance, do not use the product in a thunderstorm.Packing ListPlease unpack carefully and check that all items listed below are received. If any item is missing or damaged, please contact your dealer.NoteNote: Pictures in this manual are for reference only.Product OverviewRCS-01 motorcycle wireless console is an audio accessory that allows the user to achieve convenient communication while riding a motorcycle. It features user-friendly and easy-to-use design, improving the user's personal  safety and  work  efciency.  The product  works with  MD65X or Owner's ManualMotorcycle Wireless Console       Cable Tie x 8 Owner's ManualM5 Screw for PTT Unit x 2        Rubber Pad for PTT Unit x 6 (2 mm x 4, 1 mm x 2)M3 Screw for Motorcycle Wireless Console x 4
3MD78X with rmware version of V8.00.06.007 or later, ADA-01 wireless audio  adapter with  rmware version  of  V2.XX.XX.XXX  or  later,  ECN27 wired helmet headset, and the like.Product IntroductionProduct ControlsNo. Part Name No. Part Name1 On-Off/Switch Key 8 Headset Jack2 Side Key (SK) 9 LCD Display3 P2 Key 10 Loudspeaker Connector4 P1 Key 11 Up Key5 LED Indicator 12 Down Key6 Answer Key  13 Push-to-Talk (PTT) Key 7 End Key / /Note:  For  enhanced  convenience,  you  may request your dealer to program SK, P1 and P2 as the shortcuts to specific functions. LCD IconIcon Description The mobile radio receives no signal. More bars indicate better signal strength. The mobile radio is roaming. The mobile radio is scanning. The mobile radio stays on a non-priority channel. The mobile radio stays on priority channel 1. The mobile radio stays on priority channel 2. The current channel is set at low power.
4Icon Description The current channel is set at high power. The GPS feature is enabled, and positioning data is received. The GPS feature is enabled, but no positioning data is received.The Scrambler or Encrypt feature is enabled.The radio is in emergency mode. ●The mobile radio is stunned or killed. ●You have made too many incorrect login attempts for the programming software. ●The rental period expires. ●A power-on error occurs.Longer black block indicates higher volume.A private call is in progress.You are receiving a private call.You are initiating a private call.A group call is in progress.You are receiving a group call.You are initiating a group call.An all call is in progress.You are receiving an all call.You are initiating an all call.An emergency group call is in progress.You are receiving an emergency group call.You are initiating an emergency group call.An emergency call is in progress.You are receiving an emergency call.You are initiating an emergency call.A PABX/PSTN call is in progress.CThe mobile radio is in DMR conventional mode.XThe mobile radio is in XPT trunking mode.DThe mobile radio is in DMR trunking mode.AThe mobile radio is in MPT trunking mode.Note: For detailed feature description,  refer  to Owner's Manual of the mobile radio used with the product.
5LED IndicatorLED Indication DescriptionGlows red The mobile radio is transmitting.Glows green The mobile radio is receiving.Glows orange The call has been set up, and you can press and hold the PTT key to speak.Flashes red and blue in turn The product is in pairing mode.Flashes blue twice rapidly and periodicallyThe wireless connection is established, but no voice is transmitted.Flashes blue once rapidly and periodicallyThe wireless connection is established, and voice is being transmitted.Flashes blue slowly The wireless connection is not established.Note: LED indications of the product are the same as those of  the  mobile  radio  used  with  the  product.  For  details on other  LED indications,  refer  to Owner's  Manual  of the mobile radio.SpecicationsItem SpecicationsInput voltage  12 – 24 V DCWireless communication coverage10 mDust & Water protection IP55Operating temperature –30°C to +60°CStorage temperature  –40°C to +85°CBasic OperationsPowering On/OffThe product gives an alert tone upon power-on or power-off.Powering On
6Auto Power-onThe product automatically powers on when the motorcycle engine starts.Manual Power-onTo manually power on the product, press the On-Off/Switch key for two seconds while the motorcycle engine is running.Powering OffAuto Power-offThe product automatically powers off when the motorcycle engine stops.Manual Power-offTo Manually power off the product, do as follows:Step 1  Press and hold the On-Off/Switch key for two seconds. The LCD displays "Select Power Off".Step 2  Press the On-Off/Switch key.Note: If you prefer not  to power the  product  off when  the LCD displays "Select Power Off", press the Up key or Down key to select "No", and then press the On-Off/Switch key (or wait for 10 seconds without any operation).Pairing and ConnectionThe product can work properly only when it is paired with and wirelessly connected to the wireless audio adapter. After initial pairing and connection, the wireless connection will be automatically established afterwards.The pairing and connection can be nished automatically or manually.Auto PairingThe product and the wireless audio adapter automatically perform pairing and connection upon power-on in the case of initial use.When the LED indicator ashes blue rapidly, it indicates that the product has established wireless connection to the wireless audio adapter.Manual PairingIf the wireless audio adapter initially connected to the product has been replaced, you need to manually perform the pairing and connection.Step 1  Power off the product.
7Step 2  Hold down the On-Off/Switch key, until the LED indicator ashes red and blue in turn. The product enters pairing mode.Step 3  Make the new wireless audio adapter enter pairing mode. For details on how to make the new wireless audio adapter, refer to ADA-01 Wireless Audio Adapter Owner's Manual.The product and the wireless audio adapter automatically establish wireless connection after both of them enter pairing mode. When the LED indicator ashes blue rapidly, it indicates that the wireless connection has been established.Adjusting the Volume ●On the home screen, press the Up key or Down key to increase or decrease the volume. ●On the non-home screen, do as follows:Step 1  Press the On-Off/Switch key to switch to the volume adjustment option.Step 2  Press the Up key or Down  key to increase or decrease the volume.Selecting a Channel/Group ContactTo select a channel in DMR conventional mode or XPT trunking mode, do as follows:Step 1  On the home screen, press the On-Off/Switch key to switch to the channel selecting option.Step 2  Press the Up key or Down key to select the required channel.To select a group contact in DMR trunking mode or MPT trunking mode, do as follows:Step 1  On the home screen, press the On-Off/Switch key to switch to the group contact selecting optionStep 2  Press the Up  key or Down key to select the required group contact.TransmittingPress and hold the PTT key on the PTT unit, and speak into the microphone on the wired or wireless helmet headset.
8Note: If the product is connected to both the wired helmet headset and the  wireless  helmet headset,  the wireless  one will be  put  into  use by default. To use  the  wired  helmet headset, power off the wireless one.Using the Loudspeaker Power on the loudspeaker, and then speak into the microphone on the wired helmet headset when the mobile radio is not transmitting or receiving.Viewing the Product InformationOn the home screen, hold down both the End key and the P2 key. The product information includes the software version of the control module (MCU), wireless module (BT), and wireless audio adapter (AD), as well as the language version (FONT).Troubleshooting   Phenomena Analysis SolutionThe product fails to automatically reconnect to the wireless audio adapter in the case of disconnection.The product is out of the wireless communication coverage of the wireless audio adapter.Make sure that the product is within the wireless communication coverage of the wireless audio adapter.You hear noise during calls.The LED indicator does not glow red when you press and hold the PTT key.
9   Phenomena Analysis SolutionThe product does not respond to any key press.The system crashes. Cut off the power supply and then restart the product.The product fails to enter the home screen when you press the On-Off/Switch key.The rmware version of the mobile radio is earlier than V8.00.06.007.Upgrade the rmware version to V8.00.06.007 or later.The product fails to automatically power on after the motorcycle engine starts.The power cord has not been connected correctly.Connect the red wire to the positive pole and the black wire to the negative pole of the motorcycle battery.If the  above  solutions  cannot x your problems, or you may have  some other queries, please contact us or your local dealer for more technical support.Care and CleaningTo guarantee optimum performance as well as a long service life of the product, please follow these tips.Product Care ●Do not pierce or scrape the product. ●Keep the product away from substances that can corrode the circuitry. ●When the wired helmet earpiece is not in use, keep the magnetic connector far away from the magnet-sensitive substances and cover the earpiece jack on the wireless console with the stopple.Product CleaningCaution: Do power off the product before cleaning.  ● Clean up the dust and ne particles  on  the  product's  surface with a clean and dry lint-free cloth or a brush regularly. ●Use a non-woven cloth with neutral cleanser to clean the device after long-time use. Do not use chemical preparations such as stain removers, alcohol, sprays or oil preparations, so as to avoid potential damage on the surface.  ●Make sure the product is completely dry before use.
FCC Notice:  This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.    NOTE:  This  equipment  has  been  tested  and  found  to  comply  with  the  limits for a  Class  B digital  device,  pursuant  to  Part  15 of  the  FCC  rules.  These  limits  are  designed to  provide reasonable protection against harmful interference in a residential installation. This equipment generates  uses  and  can  radiate  radio  frequency  energy  and,  if  not  installed  and  used  in accordance with the  instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment  does  cause  harmful  interference  to  radio  or  television  reception,  which  can  be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:    ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver.     ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help.   WARNING:  Changes  or  modifications not  expressly  approved  by  the  party  responsible  for compliance could void the user's authority to operate the equipment.    RF Exposure The  equipment  complies  with  FCC  radiation  exposure  limits  set  forth  for  an  uncontrolled environment.  This  device  should  be  installed  and  operated  with  minimum  distance  20cm between the radiator & your body.
 IC Notice:  This device complies with Canada Industry licence-exempt RSS standard(s). Operation is subject to the following two conditions:   (1) this device may not cause interference; and (2) this device must accept any interference. Including interference that may cause undesired operation of the device.  Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada . Son fonctionnement est soumis aux deux conditions suivantes : ( 1 ) Ce dispositif ne peut causer d'interférences ; et ( 2 ) Ce dispositif doit accepter toute interférence , y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil.   CAN ICES-3 (B)  Avis d’Industrie Canada  Le présent appareil est conforme aux CNR d'industrie Canada applicables aux appareils radio exem pts de licence L'exploitation est autorisée aux deux conditions suivantes:   1) I'appareil ne doit pas produire de brouillage; et   2) I'utillsateur de I'appareil doit accepterbrouillage radioélectrique subi meme si le brouillage est susceptible d'encompromettre le fonctionnement. mauvais fonctionnement de I'appareil.  Cet appareil numériquie de la classe B est conforme à la norme NMB-003 du Canada. CAN NMB-3 (B)    Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.    Déclaration d'exposition aux radiations:   Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20cm de distance entre la source de rayonnement et votre corps.

Navigation menu