Hyundai Digital Technology PANSAT700HC Digital Satellite Receiver User Manual

Hyundai Digital Technology Co., Ltd. Digital Satellite Receiver Users Manual

Users Manual

FCC ID: PZ8PANSAT700HC Report No: E02.0502.FCC.259N Test of issue: May 02, 2002 Appendix F. User’s Manual ETL Inc. #584 Sangwhal-ri, Kanam-myon, Yoju-kun, Kyounggi-do, 469-880,Korea. 1 of 1 Hyundai Digital Technology Co., Ltd. Digital Satellite Receiver Model : PANSAT 700HC
11. Introduction 21.1. Overview 1.2. Main Features2. Safety/Precautions 32.1. Safety2.2. Precautions3. Check Point before Use 53.1. Accessories3.2. The Satellite dish4. Controls/Functions 64.1. Front Panel4.2. Rear Panel4.3. Remote Controller5. Using Remote Controller 125.1. Batteries5.2. Range Of Operation6. How to Connect 147. Operation 167.1. Getting Started7.2. Channel Editing7.3. System Parameters7.4. Transponder7.5. Factory Set7.6. Other Function on Remote Control8. Hard Disk Operation 668.1. Recording8.2. Playing8.3. Delete Programs8.4. Lock Programs8.5. Skip Play8.6. Split Operation8.7. Trick Play Controls without OSD9. Conditional Access 7610. Trouble Shooting 7811. Specifications 79DiSEqC is a trademark of EUTELSAT.
2This Common Interface is your “Window to the World” giving you the opportunity toenjoy scrambled programs. Enjoy the rich choice of more than 4,000 differentchannels, broadcasting a large range of culture, sports, cinema, news, events, etc.This receiver is a technical masterpiece, assembled with the highest qualifiedelectronic parts.Fully compliant with MPEG-2 and DVB standardsIntegrated COMMON INTERFACEMulti-access with twin card reader for CIUser friendly operating Menu and On-Screen Graphic MenuEasy to use EPG(Electronic Program Guide) on screen Age protection lock functionTele-text encodingManual PID control Software downloading via RS-232C connectorDiSEqC 1.2 compatible Hard Disk Functions
3Be sure to read the user's manualbefore starting the operation of theunit.Never open the cover. It is verydangerous to touch the inside of theunit due to possible electric shock.When you do not use this unit for along time, make sure that powercord is pulled out from the outlet.Also do not use a damaged powercord as it may cause fire or electricshock.Do not touch the power cord withwet hands as it may cause electricshock.A professional installation isrequired.If reception is interrupted, contactyour local service centre.Place the unit in a well ventilatedand no-heat environment.
4When installing the unitInstall the unit horizontally. Anuneven installation may cause theunit to be damaged.Do not put heavy items such as a TVon the unit. That may cause the unitto be damaged.Moving the unit to a hot area from acold one will cause condensation.Do not operate the unit for one or twohours or until it has dried completely.Where it is subject to vibrations Where it is exposed to direct sunlightWhere there is humidityWhere the temperature is too high ortoo low.Where there is no ventilationDo not install the unit:
5User's manual : 1User's manualRemote control : 1Batteries (AAA type) : 2 RCA video/audio cable : 1If any accessories listed above aremissing, contact the salesrepresentative where youpurchased this unit.This unit is working with DiSEqC 1.2 on a compatible antenna positioner.Ask your dealer for information.Accessories of the UnitYour dish should be properly installed and azimuth and elevation must be precisely set up.
6Power To switch the receiver in “standby” mode or in power on mode. Standby/Power on Indication lightFlashing red in “standby” and no light in power on mode.Remote SensorReceives the infrared signal from remote control.Channel Display(4 Digit)- When you connect the power line of the receiver, the current time is displayed.- After programming, the program number or name is displayed.MenuTo launch or terminate the menu application.SelectTo activate a highlighted item or go to next level on hypertext menu or confirmthe user s action.
7- Vol. /To adjust the volume level or change the value of an item with preprogrammedvalues. The Key can be used as a backspace to cancel the numericalinput.- CH. /To change channel or cursor position on the application screen.Slot A, BPCMCIA-module : provided by a broadcaster for watching scrambled programs.Smart Card SlotSmart Card : provided by a broadcaster for watching IRDETO scrambledprograms.
8No. Name Connector Function1. S-VHS Output to VCR or TV.2. Digital Audio RCA cinch Digital Audio Output3. TV ANT IN IEC 169-2 female Input from terrestrial antenna.4. RF OUT IEC 169-2 male Output to TV.5. VIDEO RCA cinch Composite video output.6. AUDIO L RCA cinch Left audio output.7. AUDIO R RCA cinch Right audio output.8. LNB INPUT IEC 169-24 female IF input from LNB to digital tuner.9. LOOP OUT IEC 169-24 female IF loop-through output from digital tuner.10. DATA I/O DB-9 Low speed serial port.
9POWER :To switch into ‘standby’ or ‘power on’mode.MUTE : To turn the sound on/off.Numeric Keys(0-9) : To select channels and input ofchannel numbers or characters.INFO. :To display the information of thecurrent channel.AUDIO :To change the audio track, stereo-mono mode.GUIDE :(EPG : Electronic Program Guide)To watch program information. Pressonce more to return to normal mode.CH LIST :To watch the channel list. Press to confirm or press EXIT toreturn to previous chosen channel.-Up & Down :To change the value of a selecteditem with preprogrammed values in menu.
10-Left & Right :To move the cursor up and down inmenu.can be used as a backspaceto cancel the numerical input.ENTER : To select an item or to confirm a menu.Pause function.MENU : To enter/exit the main menu.EXIT :To return to previous status or menu.RECALL :To return to the previous chosenchannel.SLEEP :To switch off the receiver automaticallyafter between 30 and 150 minutes.TV/RADIO :To switch between the TV and radiochannels.AUX IN :To select the output mode of scartconnector. TV/SAT :To toggle the TV output sourcebetween the satellite input andUHF/VHF antenna input. If your receiverhas no 'TV ANT IN' terminal in the rearpanel, this key may not work.
11BLUE :To delete a channel from the ChannelList menu. To show extended programinformation in the EPG menu. To seeTeletext Service Data. To play or pausethe stored programs on HD.IVORY :To add a new channel to the ChannelList menu. To stop the played programson HD.ORANGE(LIST) :To see variant channel lists for user'sconvenience in the Channel List menu. Towatch the list of stored programs on HD.RED :To setup favorite channel lists in theChannel List menu. To record theprogram on to HD. To delete the storedprograms on HD or set skip points.GREEN :To lock channel in the Channel Listmenu. To show current/next programinformation in the EPG menu. To playthe stored programs on HD with fastforward mode.YELLOW :To move a channel to other position inthe Channel List menu. To showprogram schedule information in theEPG menu. To play the stored programson HD with fast reverse mode.
12How to insert a batteryOpen the cover at the top of the rearside of the remote control.Insert two AAA type batteries(1.5V) to bealigned with appropriate +/- polarity.Close the cover completely.When to replace a batteryIf the operational range of remote controlis getting smaller, it indicates batteries arealmost consumed. Replace both batteries together.How to replace a batteryCheck +/- polarities and insert batteriesto be aligned with appropriate +/-polarity.Even if old and new batteries are thesame in size, do not use batteries withdifferent characteristics.Accident preventionDo not recharge, heat or disassemblethe battery. Do not cross +/- polarities. If remote controller is not going to beused for a long time, take the batteriesout.
13The remote controller can be detected by the receiver within an angle of 30 degrees to the left or right. The transmission distance of the remote control is 7m in direct line of sight.NotesWhen the remote control is not operativeReplace batteries with new ones and check AC power plug on the receiver.Abnormal operationDisturbance from peripheral devices might occur. Ensure that other productswhich might cause interference are placed further away from the receiver.Notes for handlingIf exposed to heat or water, the main body and the remote control may bedamaged, so be careful.
14
15
16After your receiver is powered up, proceed with installation as follows:When you plug in AC power, the following will be displayed on the front.Press POWER on remocon, the LED number will be displayed as follows; Press MENU key and position cursor on 'Language' column with or .Select language you want with or .ScreenNote : Languages displayed in 'Language' column are supported by yourreceiver.Main MenuSystem ParametersInstallationLanguageCommon InterfaceEnglish1Menu Language Setting
17If you want to know how to use current part in the menu, use 'help' function.Select a content in the menu.For example, if you want to know about the installation menu, select installation.ScreenPress INFO. Then you can see the help window of the selected content.Screen2HelpSince your receiver has the basic data of most satellites and channels, youcan receive programs just by plugging in. But, according to the status of yourantenna setup, you may have to modify the basic data of satellites and / orchannels.When you need to modify the data, proceed as follows ;3Satellite SettingMain MenuSystem ParametersInstallationLanguageCommon InterfaceEnglish-Next,
18PositionHigh L.O.Low L.O.Power0/22KHzDiSEqCLNB ConfigurationAsiaSat 2000.05,150 GHz 0 GHzON0 KHz-----Page Up/Down, -EditG LAmosThorPAS 4AsiaSat 2USER1USER2USER3USER4Press MENU key and position the cursor on Installation column with orand press .ScreenBy using or , select ‘LNB Configuration’ and press .ScreenNote : Enter 4-Digit password if need arise.The default password is ‘0000’Select the Satellite you want to add with or and press or .ScreenMain MenuSystem ParametersInstallationLanguageCommon InterfaceEnglish-Next,LNB ConfigurationAntenna SetupSatellite ScanTP Edit/ScanFactory SetInstallation-Next, -Prev.
19If you press , the selected Satellite will be added and the cursor willmove to right window for detailed installation.Note : If you just want to edit the data of the satellite which is already con-tained in the receiver, press after you select the satellite.Select item you want to edit with or and change each parame-ter.- Position : You can input the longitude of the satellite with numeric keys.- High L.O. / Low L.O. : Enter LNB oscillator frequency with numeric keys.- Power : Set LNB power ON or OFF with or .- 0/22KHz : Set the path of 0/22KHz switch box with or .- DiseqC : Set the path of DiSEqC box with or .If you do not use the switch box, set as “---” .Note : When you change each parameter, you need to know exactparameter of LNB to modify L.O.(local oscillator) frequency.Note : When you change each parameter, you need to understand envi-ronment of connecting the receiver and antenna in order for you toset 22KHz and DiSEqC properly.When necessary, you can change a satellite name as you wish. You can enter alphabetic characters with the numeric keys.For example, if you want to enter 'SAT-1', Press .Note : Press for space.After the installation procedure, press EXIT key or MENU key to store yourentered data.
20Select ‘Antenna Setup’ with or and press .ScreenAntenna Setup-Prev.-Main,Motor / Goto 0Move / SaveSet LimitMy longitudoMy latitudoOffStopDisable000.000.0OOOASIA3[7] 3,710 GHzVertical - 14V3,300 MSPSTuner LockFECLevel47% 51%Qual.3/4Level Indicating selected satellite signal strength levelQuality Indicating signal to noise ratioYou need to position your antenna correctly for reception of the best signal.Press MENU key.Select ‘Installation’ with or , and press .Screen4Antenna SetupLNB ConfigurationAntenna SetupSatellite ScanTP Edit/ScanFactory SetInstallation-Next, -Prev.
21Select the satellite you want with or .Press to move to TP section and select the TP you want with or.When the satellite and the TP are selected, you can check the receptionstatus of the satellite signal. If the reception signal status is bad, adjustantenna to get the following result.Tuner LockFEC 1/2, 2/3, 3/4, 5/6 or 7/8Level over 30%Quality over 10%DiSEqC 1.2 Positioner Setting- Motor/Goto 0Determine the kind of Motor & whether or not controlling it by using or . If you press , DiSEqc Motor will move toward Zero Equator. - Move/SaveMotor moves to West & East direction. - Set LimitDetermine the value of Limit of Motor. If you select , the value of Limit will be changed. - My longitude/My latitudeYou can use this item when STAB is setted on 'Motor/Goto 0'. Determine your longitude & latitude at present. 'East/West' is changed by using or .On Using DiSEqC Motor. Off Not using DiSEqC Motor. STABUsing the specific Motor supplied by Stab company. Determine the longitude of the satellite on LNBConfiguration Menu. If the longitude of the satelliteon LNB Configuration Menu is setted, user must inputthe longitude about your position at present
22After finishing ‘Antenna Setup’, execute a ‘Satellite Scan’.Then you can get all channels in the pre-programmed TPs. This func-tion can also be used to get the latest channel data while receiver isin use. Through this function, the receiver searches for all the avail-able channels and saves them in the memory.Press MENU key.Select ‘Installation’ with or , and press .Select ‘Satellite Scan’ with or , and press .ScreenSelect ‘Scan Mode’ with or .Select the scan mode you want with or .Select the satellite name you want with or .Screen5Satellite ScanLNB ConfigurationAntenna SetupSatellite ScanTP Edit/ScanFactory SetInstallation-Next, -Prev.Satellite Scan-Select, -Prev.-Main,Free+ScrambledAsiaSat 2Scan ModeSatellite Name
23If you press , the selected satellites will be scanned.ScreenWhile scanning, you can see the following menu on the screen.ScreenAfter the scanning process, the first channel of the last scanned TP will bedisplayed on the back screen.Press to finish the process. Then select a channel and press towatch a program or press MENU key or EXIT key. Note : Now you have completed all steps needed for watching programs.If you could not see the program after finishing these procedures,please contact your engineer or representative.Satellite Scan-Select, -Main,M-Prev.EGood84%TV: 2 Scanning:10% Radio: 033343536373839171819202122SATLINK 972 2APTN1 + 442074NMTVGuangdong 2Hunan 2Hubei 1Hubei 2DW 9RDP ANTENA 1RDP ESPECIALNN¥xÆWaN¥<< TWN¥@uØ1/2Auø USAAsiaSat 2 [4] 3,720 GHz Hor. 4,420~~Satellite Scan-Watch, /M-Prev.EBad1%-Page Up/Down,TV: 39 Scanning:10% Radio: 22171819202122DW 9RDP ANTENA 1RDP ESPECIALNN¥xÆWaN¥<< TWN¥@uØ1/2Auø USAAsiaSat 2 [28] 3,960 GHz Hor. 30,000~~33343536373839SATLINK 972 2APTN1 + 442074NMTVGuangdong 2Hunan 2Hubei 1Hubei 2Satellite scan is done. Press Key.Q
24You can change the current channel to any other channel you want.If you do not know the channel name, or you want to select a channelat random, you can navigate between channels with or (CH.Up/Down) till you find the channel you want.If you know the channel number, enter the number and wait 5 secondsfor the channel to change.If you know the channel name, press CH LIST key then channel list will pop-up.ScreenIn the right section, detailed information of the selected channel will bedisplayed.(Name of satellite, frequency, symbol rate, etc.) Select the channel you want with / (scroll up/down) or /(page up/down). When the scroll bar is positioned on the channel you want to see, press . TV Channel List-Watch, -EXIT, ~ -Move09-Main,-Page Up/Down,12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMAsiaSat 2[24] 4,000 GHzHorizontal-18V28,123 MSPSDeutsche WellFAV.LOCKMOVEDELADDMODEAll List6Select Channel
25While you are watching a program, press or to control volume ofthe current channel.Note : You can configure volume of each channel differently.ScreenWhen necessary, press MUTE key to remove the sound of the program tem-porarily. Then, your receiver goes into mute condition and the volume bar willbecome red. Press MUTE key again to turn the sound on.7Volume Control
26You can set up favorite channel lists as you want.For example, if you want to set favorite channel lists as following.Favorite1 : 7 DWtv, 6 Hunan1Favorite2 : 1 Fujian1Favorite3 : 3 ANHUI TV, 5 Guangdong1Firstly, set favorite1 channels.Press CH.LIST.Select 'DWtv' channel with / or / .ScreenPress RED.ScreenTV Channel List-Watch, -EXIT, ~ -Move09-Main,-Page Up/Down,12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMAsiaSat 2[24] 4,000 GHzHorizontal-18V28,123 MSPSDeutsche WellFAV.LOCKMOVEDELADDMODEAll ListTV Channel List-Select, -Exit/12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMAsiaSat 2[24] 4,000 GHzHorizontal-18V28,123 MSPSDeutsche WellFAV.LOCKMOVEDELADDMODEAll List Favorite StateFavorite 1Favorite 2Favorite 3Favorite 4Favorite 51Favorite Channel
27Select favorite1 with / and Press .ScreenDo the same for the 'Hunan 1' channel.ScreenTV Channel List-Select, -Exit/12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMAsiaSat 2[24] 4,847 GHzHorizontal-18V28,123 MSPSDbanFAV.LOCKMOVEDELADDMODEAll List Favorite StateFavorite 1Favorite 2Favorite 3Favorite 4Favorite 5Rename.TV Channel List12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMAsiaSat 2[24] 4,000 GHzHorizontal-18V28,123 MSPSDeutsche WellFAV.LOCKMOVEDELADDMODEAll List-Watch, -Exit, ~ -Move09-Main,-Page Up/Down,TV Channel List12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMAsiaSat 2[20] 3,847 GHzHorizontal-18V4,420 MSPSHunanFAV.LOCKMOVEDELADDMODEAll List-Watch, -Exit, ~ -Move09-Main,-Page Up/Down,
28Press RED.ScreenPress .ScreenFavorite1 ~ Favorite5 are default name. Users can rename them for theirconvenience. If you want to rename 'Favorite1' (for example 'Drama').Press RED.ScreenTV Channel List-Select, -Exit/12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMAsiaSat 2[24] 4,847 GHzHorizontal-18V28,123 MSPSDbanFAV.LOCKMOVEDELADDMODEAll List Favorite StateFavorite 1Favorite 2Favorite 3Favorite 4Favorite 5Rename.TV Channel List12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMAsiaSat 2[24] 4,000 GHzHorizontal-18V28,123 MSPSDeutsche WellFAV.LOCKMOVEDELADDMODEAll List-Watch, -Exit, ~ -Move09-Main,-Page Up/Down,TV Channel List-Select, -Exit/12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMAsiaSat 2[24] 4,000 GHzHorizontal-18V28,123 MSPSDeutsche WellFAV.LOCKMOVEDELADDMODEAll List Favorite StateFavorite 1Favorite 2Favorite 3Favorite 4Favorite 5Rename.
29Select ‘Favorite 1’ with / .ScreenPress IVORY.ScreeTV Channel List-Select, -Exit/12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMAsiaSat 2[24] 4,847 GHzHorizontal-18V28,123 MSPSDbanFAV.LOCKMOVEDELADDMODEAll List Favorite StateFavorite 1Favorite 2Favorite 3Favorite 4Favorite 5Rename.TV Channel List-Select, -Exit/12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMAsiaSat 2[24] 4,830 GHzHorizontal-18V28,123 MSPS HTV1FAV.LOCKMOVEDELADDMODEAll List Favorite StateRename.Favorite 1Favorite 2Favorite 3Favorite 4Favorite 5TV/SAT LEDPower ON Power OFFON TV ANT IN signal will be out.OFF Decoded signal will be out TV ANT IN signal will be out.through RF.
30ScreenPress MENU, EXIT or to finish the process.You have finished favorite1 channel setting.With similar way, you can set favorite2 ~ favorite5 channel list.You can use these favorite channel lists by using ORANGE key. Refer to the next section for detail.TV Channel List-Select, -Exit//12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMAsiaSat 2[24] 4,000 GHzHorizontal-18V28,123 MSPS he WellFAV.LOCKMOVEDELADDMODEAll List Favorite StateRename.DRAMAFavorite 2Favorite 3Favorite 4Favorite 5
31Using this function, you can see variant channel lists which may enable you toedit and select channels more conveniently.If you have set up favorite channel lists as the previous section, you can usethem as following.Press CH.LIST.ScreenPress ORANGE.ScreenTV Channel List-Watch, -Exit, ~ -Move09-Main,-Page Up/Down,12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMAsiaSat 2[20] 3,847 GHzHorizontal-18V4,420 MSPSHunanFAV.LOCKMOVEDELADDMODEAll ListTV Channel List-Exit/12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMAsiaSat 2[20] 3,847 GHzHorizontal-18V4,420 MSPSHunanFAV.LOCKMOVEDELADDMODEAll ListABChannel List ModeFavoriteSatelliteAlphabetFavorite 1AsiaSat 2AFree+Scrambled2Channel List ModeFavorite Mode
32You can see 'Channel List Mode' window. Select 'Favorite' with /and select 'Favorite1' with or .ScreenPress . ScreenYou can see only favorite1 channels are listed. With similar way, you can seefavorite2 ~ favorite5 channel list.If you want to return to all channel list (all channels of the selected satellite),press ORANGE and select 'Satellite' with / and press .ScreenTV Channel List-Watch, -Exit, ~ -Move09-Main,-Page Up/Down,AsiaSat 2[20] 3,847 GHzHorizontal-18V4,420 MSPSHunanFAV.LOCKMOVEDELADDMODE67Hunan 1DWtvFavorite 11TV Channel List-Exit/AsiaSat 2[24] 4,000 GHzHorizontal-18V28,123 MSPSDeutsche WellFAV.LOCKMOVEDELADDMODE27DIGITL VIDDWtvDABABChannel List ModeFavoriteSatelliteAlphabetFavorite 1AsiaSat 2DFree+ScrambledTV Channel List-Exit/12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMAsiaSat 2[20] 3,847 GHzHorizontal-18V4,420 MSPSHunanFAV.LOCKMOVEDELADDMODEAll ListABChannel List ModeFavoriteSatelliteAlphabetFavorite 1AsiaSat 2AFree+Scrambled
33Using this function, you can see the channel list which have same initial. This function isuseful when you search specific channel among the list of thousands channels. For example, if you want to see the channel lists which start with 'D'.Press ORANGE in the channel list and select 'Alphabet' with / .ScreenSelect 'D' with / .ScreenTV Channel List-Exit/12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMAsiaSat 2[20] 3,000 GHzHorizontal-18V4,420 MSPSHunanFAV.LOCKMOVEDELADDMODEAll ListABChannel List ModeFavoriteSatelliteAlphabetFavorite 1AsiaSat 2AFree+ScrambledTV Channel List-Exit/12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMAsiaSat 2[20] 3,000 GHzHorizontal-18V4,420 MSPSDeutsche WellFAV.LOCKMOVEDELADDMODEAll ListABChannel List ModeFavoriteSatelliteAlphabetFavorite 1AsiaSat 2DFree+ScrambledAlphabet ModePress .ScreenYou can see the channel list where all channels have initial 'D'.TV Channel List-Watch, -Exit, ~ -Move09-Main,-Page Up/Down,AsiaSat 2[24] 4,000 GHzHorizontal-18V28,123 MSPSDeutsche WellFAV.LOCKMOVEDELADDMODE27DIGITL VIDDWtvDAB
34Press ORANGE in the channel list and select first line with / .Select 'Free only' with / . ScreenSelect 'Favorite' or 'Satellite' or 'Alphabet' and press . You can see onlythe selected 'free' channel list. TV Channel List-Exit/12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMAsiaSat 2[20] 3,000 GHzHorizontal-18V4,420 MSPSHunanFAV.LOCKMOVEDELADDMODEAll ListABChannel List ModeFavoriteSatelliteAlphabetFavorite 1AsiaSat 2AFree+ScrambledFree only ModePress ORANGE in the channel list and select first line with / . Select 'Free+ Scrambled' with / . ScreenTV Channel List-Exit/12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMAsiaSat 2[20] 3,20 GHzHorizontal-18V4,420 MSPSDianFAV.LOCKMOVEDELADDMODEAll ListABChannel List ModeFavoriteSatelliteAlphabetDRAMAAsiaSat 2AFree+ScrambledFree + Scrambled Mode
35By using this function, you can see all channel list of the selected satellite.Press ORANGE and select ‘Satellite’ item with / . ScreenPress / to select a satellite and press .TV Channel List-Exit/AsiaSat 2[24] 4,000 GHzHorizontal-18V28,123 MSPSDeutsche WellFAV.LOCKMOVEDELADDMODE27DIGITL VIDDWtvDABABChannel List ModeFavoriteSatelliteAlphabetFavorite 1AsiaSat 2DFree+ScrambledSatellite ModeSelect 'Favorite' or 'Satellite' or 'Alphabet' and press . You can see theselected free and scrambled channel list.ScreenNote : 'Scrambled' channel can be shown only with CI (Common Interface)model and CAS (Conditional Access System) model.'Free' channel can be shown with all (FTA(Free To Air) and CI andCAS) model.TV Channel List-Watch, -Exit, ~ -Move09-Main,-Page Up/Down,12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMAsiaSat 2[24] 4,000 GHzHorizontal-18V28,123 MSPSDeutsche WellFAV.LOCKMOVEDELADDMODEAll List
36This menu enables you to prevent children from viewing programs unsuitablefor their age.Press CH.LIST and Select the channel you want to lock with / oror and press GREEN. Then the selected channel is locked.ScreenNote : If ‘password' window is risen as following picture, enter password withnumeric keys (default password is' 0000'). Then you can lock thechannel. If you don't want this window, change ‘Parental Control' setup in the ‘System Parameters' menu. Refer to the ‘Parental control' in‘System parameters' in this manual for detail.Screen3Lock ChannelTV Channel List-Watch, / -EXIT, ~ -Move09-Main,-Page Up/Down,12345678Fujian 1NMCHTVRAIGuangdong 1Hunan 1MCMDWtvTVEAsiaSat 2[24] 4,000 GHzHorizontal-18V28,123 MSPSDeutsche WellFAV.LOCKMOVEDELADDMODEAll ListTV Channel List-Watch, -EXIT, ~ -Move09-Main,-Page Up/Down,12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMAsiaSat 2[24] 4,000 GHzHorizontal-18V28,123 MSPSDeutsche WellFAV.LOCKMOVEDELADDMODEAll List
37ScreenPress MENU,EXIT or to finish the process.Without entering your password, you cannot watch a locked channel's pro-gram.ScreenIf you want to cancel the channel lock, go to the channel list and select thechannel and press GREEN.TV Channel List-Watch, / -EXIT, ~ -Move09-Main,-Page Up/Down,12345678Fujian 1NMCHTVRAIGuangdong 1Hunan 1MCMDWtvTVEAsiaSat 2[24] 4,000 GHzHorizontal-18V28,123 MSPSDeutsche WellFAV.LOCKMOVEDELADDMODEAll List<< Authorized! >>7 DWtv 14:1413:56 ~ 14:26In Focus((((((1/?AsiaSat 2
38You can organize the number or sequence of the channels.Press CH.LIST. ScreenSelect the channel you want to move with / or / andpress YELLOW.ScreenMove the selected channel with / or / to the position youwant.ScreenTV Channel List-Watch, / -EXIT, ~ -Move0L9-Main,-Page Up/Down,1718192021222324Jiangxi 1Jiangxi 2LNTVWNS MEA LONSATLINK 972 2APTN1 +442074NMTVGuangdong 1AsiaSat 2[9] 3,773 GHzHorizontal-18V5,632 MSPSReuters LondoFAV.LOCKMOVEDELADDMODEAll ListTV Channel List-Watch, -EXIT, ~ -Move09-Main,-Page Up/Down,910111213141516RAI InternatiTVETV5-AsiaRTPiuØoH-u1/4Ö¥x CSªFËê>>Ú¥x ET«DoZ¥x USTV-Ioé¥>>¥x JET AsiaSat 2[24] 4,000 GHzHorizontal-18V28,123 MSPSDeutsche WellFAV.LOCKMOVEDELADDMODEAll ListSSSSTV Channel List-Watch, -EXIT, ~ -Move09-Main,-Page Up/Down,912111213141516RAI InternatiRTPiTV5-AsiaRTPiuØoH-u1/4Ö¥x CSªFËê>>Ú¥x ET«DoZ¥x USTV-Ioé¥>>¥x JET AsiaSat 2[24] 4,000 GHzHorizontal-18V28,123 MSPSDeutsche WellFAV.LOCKMOVEDELADDMODEAll ListSSSS4Channel Order Setting
39Press YELLOW.ScreenPress MENU,EXIT or to finish the process. TV Channel List-Watch, -EXIT, ~ -Move09-Main,-Page Up/Down,910111213141516RAI InternatiRTPiTVETV5-AsiauØoH-u1/4Ö¥x CSªFËê>>Ú¥x ET«DoZ¥x USTV-Ioé¥>>¥x JET AsiaSat 2[24] 4,000 GHzHorizontal-18V28,123 MSPSDeutsche WellFAV.LOCKMOVEDELADDMODEAll ListSSSS5Delete ChannelYou can delete channels from the channel list. Press CH.LIST and select the channel you want to remove with /or / . ScreenTV Channel List-Watch, -Exit,/ ~ -Move0L9-Main,-Page Up/Down,910111213141516TVETV5 - AsiaHubei 1Hubei 2RAI InternatiFujian 2Jiangxi 1Jiangxi 2AsiaSat 2[3] 3,713 GHzHorizontal-18V4,420 MSPSHubeiFAV.LOCKMOVEDELADDMODEAll List
40Press BLUE.Note : If ‘password' window is risen as following picture, enter password withnumeric keys (default password is' 0000'). Then you can delete thechannel. If you don't want this window, change ‘Parental Control' setup in the ‘System Parameters' menu. Refer to the 'Parental control' inSystem parameters' in this manual for detail.ScreenThen, you need to confirm the deletion. If you definitely want to delete,press . If not, press EXIT.ScreenNote: Please be careful when you delete channel(s).Press MENU, EXIT or to finish the process.TV Channel List-Watch, -Exit,/ ~ -Move0L9-Main,-Page Up/Down,910111213141516TVETV5 - AsiaHubei 1Hubei 2RAI InternatiFujian 2Jiangxi 1Jiangxi 2AsiaSat 2[3] 3,713 GHzHorizontal-18V4,420 MSPSHubeiFAV.LOCKMOVEDELADDMODEPASSWORD????TV Channel List-Watch, -Exit,/ ~ -Move0L9-Main,-Page Up/Down,910111213141516TVETV5 - AsiaHubei 1Hubei 2RAI InternatiFujian 2Jiangxi 1Jiangxi 2AsiaSat 2[3] 3,713 GHzHorizontal-18V4,420 MSPSHubeiFAV.LOCKMOVEDELADDMODEAll List Do you want to delete this channel?Yes / NoQ
41Press CH.LIST. ScreenPress Ivory.ScreenSelect a satellite into which you want to add your new channel. Note : You can only select satellites which you set in ‘Installation’ menu.Move to 'TP Frequency' section (column) by pressing and change frequency with / or enter frequency with numeric keys. Note : TP frequency consists of 5 digits ending with GHz.For example : TP Frequency 4.000GHz is6Add ChannelTV Channel List-Watch, -EXIT, ~ -Move09-Main,-Page Up/Down,12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMAsiaSat 2[24] 4,000 GHzHorizontal-18V28,123 MSPSDeutsche WellFAV.LOCKMOVEDELADDMODEAll ListAdd Digital ChannelAsiaSat 2[24] 4,000 GHzHorizontal-18V28,123 MSPSDWtv230523062304Satellite NameTP FrequencyPolarizationSymbol RateCH. NameVideo PIDAudio PIDPCR PID
42Move to 'Polarization' by pressing and select Horizontal or Vertical with or . Note : Please check whether LNB Power is ON in ‘Installation’ menuMove to 'Symbol Rate' by pressing and enter the Symbol Rate valuewith numeric keys. Move to 'CH. Name' by pressing and enter the alphabetic characterswith numeric keys. For example : if you want to enter SAT-1,Note : Press for spaceMove to 'VIDEO PID' by pressing key and enter the proper value withnumeric keys. Move to 'AUDIO PID' by pressing key and enter the proper value withnumeric keys. Move to 'PCR PID' by pressing key and enter the value between0000~8192 with numeric keys. Note : The above mentioned TP Frequency, Symbol Rate, VIDEO PID, AUDIOPID, PCR PID are very important for optimal satellite signal reception.We recommend you get professional advice where available. Youcannot setup ‘VIDEO PID’ for RADIO channels.
43This sub-menu allows you to set the age for parental locking and protect children from viewing programs unsuitable for their age.Press MENU key. Press or to select 'System Parameters' and press .ScreenPress or to select 'Parental Control' and press .Screen System Parameters-Prev./Parental ControlSystem InformationLocal time/TimerDL SavingTV TypeAspect RatioScreendd/mm/yyyy hh:mmNoMULTI4×3P/S-Next,DL SavingTV TypeAspect RatioScreenA/V ModeSystem Parameters-Next, -Prev./Y/CNoPAL4X3P/SParental ControlSystem InformationLocal time/Timer 19/06/2001 11:57PASSWORD????1Setting Age Restrictions
44Enter 4-digit password.Note : The default password is '0000'ScreenPress or to select ‘Age Limit’.ScreenPress or to select age you want. Note : ’Age limit’ can be applicable only for the signal which carries agelimit information.None No age limit8Without entering password, programs are restricted tothose who are over 8 years old.12 over 12 years old.15 over 15 years old.18 over 18 years old.DL SavingTV TypeAspect RatioScreenA/V ModeSystem Parameters-Next, -Prev./Y/CNoPAL4X3P/SParental ControlSystem InformationLocal time/Timer 19/06/2001 11:58PASSWORD<< Authorized! >>****Parental Control-Prev.-Main,Age LimitLock Channel EditingLock InstallationNew PasswordVerify PasswordPersonalNoneNoNo????????*****
45You can set SECURITY CHECK to protect your current installation from beingchanged (location shift, deletion, adding etc.) or modifying of installed data.Press MENU keyPress or to select 'System Parameters' and press .Press or to select 'Parental Control' and press .Enter 4-digit password.Note : The default password is '0000'Press or to select ‘Lock channel Editing’, or ‘Lock Installation’.Press or to select ‘Yes’, or ‘No’. Note : Your receiver is pre-set as 'No'.You can change your password.Press MENU key. Press or to select 'System Parameters' and press .Press or to select 'Parental Control' and press .Enter 4-digit password.Note : The default password is '0000'Press or to select ‘New Password’.Yes When you process with ‘Channel Editing’ or ‘Installation’ of MainMenu, your receiver will ask for password. If you enter wrongpassword, you cannot proceed further.No You do not enter password during your processing.2Security Check3Password Changing
46Press ~ numeric numbers to enter new password.Press ~ numeric numbers again to verify the new password.Note : When you forget your new password, please consult the shop whereyou bought the receiver or the nearest dealer.You can enter your personal information, such as your name and address, etc.Press MENU key.Press or to select 'System Parameters' and press .Press or to select 'Parental Control' and press .Enter 4-digit password.Note : The default password is '0000'Press or to select ‘Personal’.Press ~ numeric numbers to enter new personal information.For example: If you want to enter 'WELCOME',Note : 1. Maximum 32 letters can be entered.2. Your entered personal information will be displayed on the TV screenas Welcome Window when you power on your receiver.3. Initial information is ‘ ’.4. After purchasing the receiver, if information other than that which youentered is displayed, please consult the shop where you bought it.5. Personal Information does not affect your viewing in any way.4Personal Information Setting
47You can check the current information about your receiver such as receiver’ssoftware and hardware version or manufacturing date.Press MENU key.Press or to select 'System Parameters' and press .ScreenPress or to select 'System Information' and press .ScreenNote : This information is necessary when you download new software oryou need to repair the receiver.DL SavingTV TypeAspect RatioScreenA/V ModeSystem Parameters-Next, -Prev./Y/CNoPAL4X3P/SParental ControlSystem InformationLocal time/Timer 18/07/2001 16:39System Information-Prev.-Main,Product NameHardware VersionSoftware VersionChannel ListLast UpdatePansat 700HC5System Information
48You can pre-set the on/off time of your receiver. During your absence, you can record programs on your VCR.Press MENU key.Press or to select ‘System Parameters’, and press .ScreenPress or to select ‘Local Time/Timer’, and press .Note : Without the local time setting, this ‘TIMER’ function does not work.ScreenPress or to select ‘Timer #(number)’ you want to set and press .determine 'CH. Type' by selecting 'TV' or 'RADIO' with or .6Setting Timer (Automatic power On/Off)DL SavingTV TypeAspect RatioScreenA/V ModeSystem Parameters-Next,~ -Edit,09 -Prev./Y/CNoPAL4X3P/SParental ControlSystem InformationLocal time/Timer 18/07/2001 16:40CH. TypeCH. NumberCH. NameStart TimeStop TimeStatusHD recordTV1Fujian 118/07/2001 16:4218/07/2001 17:42NoON18/07/2001 16:40Timer-Edit, -Prev.-Main,Timer #1Timer #2Timer #3Timer #4Timer #5Timer #6Timer #7
49Select 'CH. Number' with or and enter channel number withnumeric keys or with or .Select ‘Start Time’ for your receiver power-on.For example : For 1st of February in the year of 2000, 7:30 P.M.,Enter in sequenceSelect ‘Stop Time’ by pressing .Enter power off time in the same way as you entered ‘Start Time’Select ‘Status’ and set ‘Once/Daily/Weekly/No’ with or .Select ‘HD record’ and set ‘ON’ with or if you want to record automatically.Note : 1. Without ‘STATUS’ being actuated (ON), Timer does not work.2. If Prior time than current is entered, Timer does not work.3. You can pre-set 14 TIMERs simultaneously. Regardless of number ofTIMER, Timer will work in sequence of time sequence.4. Remocon Key doesn’t work while VCR recording.(While HDDrecording, remocon key works)You can adjust current local time when summer time is applicable.Press MENU key.Press or to select ‘System Parameters’, and press .Press or to select ‘DL Saving’.Press or to select ‘Yes’ or ‘No’ .Note : Without current local time setting, this menu cannot beprocessed.Yes Set for daylight saving function activated The current time automatically moves one hour aheadNo Set for daylight saving function deactivatedThe current time automatically moves on hour behind7Setting Day Light Saving Time (Summer Time)
68For using trick play mode, you must press or INFO key then HD-InformationBar will pop-up.ScreenTrick Play Mode : Pause, Jump, Fast Forward, Fast Reverse, Resume.- Pause Press BLUE .- Jump Press BLUE .Press YELLOW or GREEN .Press BLUE .- Fast Foeward Press YELLOW .- Fast Reverse Press GREEN .- Stop Press IVORY .5 CH 22 - Indua00:05:04 / 00:24:53CH 22 - Indus2 Ch((((((S2Trick Play ControlsHD Playing HD PausedYELLOW Fast Forward Jump ForwardGREEN Fast Reverse Jump Backward BLUE Pause ResumeIVORY Stop StopINFO or Info On/Off Info On/Off
69You can delete any program in HD-Program Guide menu.Press ORANGE(LIST) key then HD-Program Guide menu will pop-up.In HD-Program Guide, select a program with or .Press RED( ) key to delete the program then Delete dialog menu will pop-up. ScreenPress to delete the program or EXIT key to void.Note : For deleting any stored program, you must stop both playing andrecording.HD-Program Guide-Delete, -Satellite Mode11:5200:0100:0300:0100:0100:25TitlePlay time 00:0328/08/2001 11:22Free 37.3 GB (95.6%) CH 23 - IndusPlay Type12345Default EventCH 23 - IndusCH 25 - DBN24RAI InternatiCH 22 - Indus/ /-Wotoh,Do you want to delete this ? Yes /QNo E
70If you want to lock any program, enter the advanced menu by pressingMENU key with HD- Information Bar.After locking a program, you must enter the password for playing the pro-gram.Start playing a program.Press then HD-Information Bar will pop-up.Press MENU key, the advanced menu will pop-up. ScreenSelect ‘LOCK’ using or .Press , LOCK enable or disable will be setted with Yes or No.Note : The password for playing a stored program is the same password forany other lock operation.1 SABe TV Netwo00:00:16 / 00:01:10Default Event2 Ch((((((SLockClear skip pointsSplit takeYes
71You can set the part you don’t want to play, such as advertise ments.The skip part consists of start and end points.In all, 10 skip points are available.Select a program with or , and press to play in HD-ProgramGuide menu.Start playing and search the start point of skip play you want using trick playcontrols.Press RED( ) key to set the start point. ScreenTemperary start point will be displayed with a red pointer on the Bar.Press RED( ) key to set the end point you want.5 CH 22 - Indus00:06:03 / 00:24:53CH 22 - Indus2 Ch((((((S
72Then a proper pair of start and end points will be displayed with yellowpointers on the Bar.ScreenNote : To try setting on improper pair will be rejected.Press RED( ) key at the position between start and end points, then theskip-point will be removed.Press MENU key and select ‘Clear skip points’.ScreenPress , to remove all skip points.5 CH 22 - Indus00:06:03 / 00:24:53CH 22 - Indus2 Ch((((((S5 CH 22 - Indus00:07:06 / 00:24:53CH 22 - Indus2 Ch((((((SLockClear skip pointsSplit takeNo
73You can split a program in two programs.The operation takes a few minutes to complete splitting.Select a program with or , and press to play in HD-ProgramGuide menu.Search the split point you want using trick play controls.Press MENU key, then the advanced menu will pop-up. ScreenSelect ‘Split take’ menu and press , then Split take dialog will pop-up.Screen4 CH 22 - Indus00:05:06 / 00:23:12CH 22 - Indus2 Ch((((((SLockClear skip pointsSplit takeNo4 CH 22 - Indus00:05:06 / 00:23:12CH 22 - Indus2 Ch((((((SLockClear skip pointsSplit takeNoSplit this program in two ? Yes /QNo E
74Press to start splitting or EXIT key to void.If split operation starts, the progress window will pop-up and you can seethe status of process.ScreenAfter splitting, HD-Program Guide menu will pop-up and splitted programwill be selected.ScreenHD-Program Guide-Delete, -Satellite Mode12:0000:0100:0100:0100:23TitlePlay time 00:2328/08/2001 11:27Free 37.7 GB (96.6%) CH 22 - IndusPlay Type1234Default EventCH 25 - DBN 24RAI InternatiCH 22 - Indus/ /-Wotoh,Now splitting program42%HD-Program Guide-Delete, -Satellite Mode12:0000:0100:0100:0100:0500:18TitlePlay time 00:1028/08/2001 11:27Free 37.5 GB (96.1%) CH 22 - IndusPlay Type12345Default EventCH 25 - DBN 24RAI InternatiCH 22 - IndusCH 22 - Indus/ /-Wotoh,
75You can use trick play controls without HD-Information Bar.Small yellow icon will be displayed for trick play controls.Additional play control is available in this mode.This function is activated at pause state using GREEN( ) / YELLOW( ).and make the sequence played step by step.Select a program with or , and press to play in HD-ProgramGuide menu.Press INFO or to turn off HD-Information Bar.Press BLUE( ),GREEN( ) or YELLOW( ) to start controlling trick playwithout any OSD. You can control trick play while yellow icons are displayed.Besides, you can control step by step play with GREEN( ) / YELLOW( )while pause state.Note : You can not control jump play without HD-Information Bar.
76To receive pay-TV channels you need a CA Module and a Smart card fromthe service provider (program distributor) of your preference. If you are sub-scribing to services from more than one service provider, you need to changedifferent smart card or even different CA Modules.Since a smart card is connected to a single service provider, a limited range ofchannels will be available. Without the CA Module and the smart card, youcan watch only ‘Free-to-Air’ programs.PIN-CodeNote : 1. Insert the CAM fully into the slot so that the arrow marked on the CAM faces upwards and inwards.2. Insert the smart card fully into the CAM so that the micro chip (gold color) faces upwards and inwards.The message of ‘CAM Initializing’will appear on the screen.After the message ‘CAM Initializing’has disappeared, you can select thechannel you want.The card is loaded with a 4-digit code, a so-called PIN code (PersonalIdentification Number). Normally the PIN code is ‘0000’ or ‘1234’. The PINcode is necessary for the future extra service offered by the service provider.With a DVB COMMON INTERFACE compatible CAM (Conditional AccessModule) and a Smart card, you can receive relevant scrambled channelsand/or encrypted channels. Insert a CAM into one slot of your receiver.(You can insert two CAMs at the same time)
77You can check the status of CAM and smart card inserted in their slots.Press MENU key.Press or , and select the Common Interface you want, then press.ScreenBrief information on selected CAM will be displayed. ScreenIf you want detailed information on the selected CAM select slot number 1or slot number 2 with or and press .Proceed with further instructions displayed on the screen, depending onthe CAM in use.Note : Further detailed information is not mentioned in this manual since theinformation depends on CAM and smart cards.-Next, -Prev.Common InterfaceDVB_CI_V1.00ViaccessNot availableNot availableSlot #1VersionProviderSlot #2VersionProviderMain MenuSystem ParametersInstallationLanguageCommon InterfaceEnglish-Next,
78RemedyConnect power cord properly intothe power socket.Connect two terminals correctlywith scart cable or RCA or RF cable.Connect the antenna cable cor-rectly.Adjust the direction of antenna.Check the cable connections, LNB and other equipment connect-ed between the LNB and thereceiver or adjust the antenna.Type the setting value correctly.Use TV of same mode.Use the NTSC/PAL converter con-nected to the receiver and TV.Change the batteries.Switch off the light.Aim the remote control at thereceiver.Possible causesAC power cord disconnected.Wrong connection of thevideo/audio output to TV inputterminal.Wrong connection of satelliteantenna cable.Wrong direction of satelliteantenna.No signal or weak signal.Wrong setting of channel infor-mation in MENU screen.Your TV mode is different fromsatellite broadcasting mode.Battery exhausted.Fluorescent light interferingwith the remote controllerRemote controller is incorrectlyaimed.ProblemLED on front paneldoes not light.No Picture or sound.Black-and-whitescreen or V-Hold.The remote con-troller is not working.There may be various reasons for the abnormal operation of the unit. Therefore, if theunit does not work properly, check it according to the procedures shown in the tablebelow :
79IEC 169-24, female950MHz 2150MHz-65dBm 25dBm14/18V, max 400mA22KHz Ver 1.2 & Ver 1.0 CompatibleQPSK4Msps 45MspsAuto conversion32bit processor (50MHz)4Mbyte2Mbyte2KbyteMain Proflie @ Main Levelup to 15M bits/s720 X 576, 720 X 480NTSC, PAL4:3, 16:9Mono, Dual mono, Stereo, Joint Stereo32, 44.1 and 48 KHz9pin D-sub male, Max 115K bpsFully DVB compliantConnectorFrequency rangeSignal levelLNB supplyLNB switch controlDiSEqCFront endSymbol rateSCPC and MCPC CapableSpectral inversionProcessorSDRAMFLASHEEPROMMPEG 2Data RateResolutionVideo formatAspec RatioDVB compliantMPEG 1 layer 1 & 2TypeSampling ratesConnectorSystemcapabilitiesLNB/Tuner inputDemodulatorSystem resourceVideo DecoderTeletextMPEG AudioSerial data interface
80NEC-IRup to 7 Metermax 40W100V 250V47Hz 63Hz1 X RCA cinch2 X RCA cinch1 X RCA cinch9pin D-subIEC 169 24 IEC 169 24 335 X 58.5 X 268(mm)3.2KgCodeOperating conditionPower consumptionSupply voltageSupply frequencyVideo outAudio L/RDIGITAL OUTSerial dataDigital tuner inputLoop-through Digital tunerSize (W X H X Weight (Net)Remote controlPower supplyRear Panel con-nectorsPhysicalSpecificationNote : These connectors can be removed by customer’s requirement.
50You can set your TV display mode with this sub-menu.Press MENU key.Press or to select ‘System Parameters’, and press .Press or to select ‘TV Type’.Press or to select ‘Multi’, ‘PAL’, or ‘NTSC’.Note : If the satellite signal and your TV type are mismatched, the TV picturemay be distorted. Even in this case, MENU will be displayed as normal.(e.g. When you receive PAL satellite signal with NTSC TV type settingor vice versa)Multi When your TV is compatible with NTSC/PAL dual mode.PAL When your TV is only for PAL reception. Regardless of satellite signal, the display will be done in PAL format.NTSC When your TV is only for NTSC reception. Regardless ofsatellite signal, the display will be done in NTSC format.8Setting TV Type
51This sub-menu allows you to select your TV aspect ratio to 4:3 or 16:9 according to your wishes.Press MENU key.Press or to select ‘System Parameters’, and press .Press or to select ‘Aspect Ratio’.Press or to select ‘4x3’ or ‘16x9’ or ‘Auto’.Note : If you set 4 x 3 when the Satellite input signal is 16 x 9, the right and the left parts of the original picture may not be seen. 9Setting Aspect Ratio4x3 When your TV is 4:3. 16x9 When your TV is 16:9.Auto When setting suitable aspect ratio automatically.
52You can select the satellite input signal display mode.Press MENU key.Press or to select ‘System Parameters’, and press .Press or to select ‘Screen’.Press or to select ‘P/S’ or ‘L. Box’.Note : 1. If you select ‘L.Box’, the screen might be distorted. Upper and lowerpart of the screen will be blocked with black stripes.2. ‘Screen’ function is helpful when receiving 16 x 9 signal with TV of4x3 format.P/S When you set screen display boundary from Pan/Scandata of Satellite input signal. (For signal for 16x9 program)L.Box You can watch 16 x 9 ratio screen by reducing originalsize vertically and horizontally.10Setting Screen
53After ‘LNB Configuration’ and ‘Antenna Setup’ procedure, when nec-essary, you can edit and/or add certain TPs (transponders)Press MENU key.Select ‘Installation’ with or , and press .ScreenSelect ‘TP Edit/Scan’ with or , and press .ScreenSelect the ‘Satellite Name’ which includes the TP you want toadd/edit with or .Move to ‘TP Frequency’with and select the TP you want toedit with or .If you want to add the new TP, enter the TP frequency withnumeric keys.1TP Edit / ScanInstallation-Next, -Prev.LNB ConfigurationAntenna SetupSatellite ScanTP Edit/ScanFactory SetTP Edit/Scan-Select, -Prev.-Main,AsiaSat 2[24] 4,000 GHzHorizontal-18V28,123 MSPSFree+Scrambled Good81%Satellite NameTP FrequencyPolarizationSymbol RateScanTP Delete
54Select ‘Polarization’ by pressing and the set the propervalue for selected TP with or .Select ‘Symbol rate’ by pressing and enter the symbol ratevalue for the selected TP with numeric keys . After entering all values of the TP parameters, move to ‘SCAN’section (column) with and press for storing all theentered TP data.As a result, you can get the following menu showing the scan-ning process.ScreenAfter scanning process, the first channel of scanned TP will be displayed.ScreenNote : If the scan fails, please check whether your entered values are cor-rect or not and the signal reception sensitivity is good or bad.TP Edit/Scan-Select, -Prev.-Main,USER[15] 3,820 GHzVertical-14V28,123 MSPSFree+ScrambledGood81%Satellite NameTP FrequencyPolarizationSymbol RateScanTP DeleteScanningPress to stop scanningQTP Edit/ScanGood82%-Watch, -Prev./-Page Up/Down,TV: 6 Success Radio: 20171819202122DW 9RDP ANTENA 1RDP ESPECIALNN¥xÆWaN¥<< TWN¥@uØ1/2Auø USA-AsiaSat 2 [24] 4,000 GHz Hor. 28,123~~910111213141516RAI InternatiTVETV5-AsiaRTPiuØoH-u1/4Ö¥x CSªFËê>>Ú¥x ET«DoZ¥x USTV-Ioé¥>>¥x JET
55Press MENU key.Select ‘Installation’ with or , and press .Select ‘TP Edit/Scan’ with or , and press .ScreenMove to TP section (column) with and select the TP you wantto delete with or .Move to ‘TP Delete’ section (column) by pressing and press .When the menu asks you to confirm the deletion, press if youwant to delete it or press EXIT key if you want to void the deletion.ScreenTP Edit/Scan-Select, -Prev.-Main,AsiaSat 2[24] 4,000 GHzHorizontal - 18V28,123 MSPSFree+ScrambledGood80%Satellite NameTP FrequencyPolarizationSymbol RateScanTP DeleteTP Edit/Scan-Select, -Prev.-Main,USER[15] 3,820 GHzVertical-14V28,123 MSPSFree+ScrambledGood81%Satellite NameTP FrequencyPolarizationSymbol RateScanTP DeleteDo you want to delete this TP?Yes / NoQ2TP Delete
56The status of the receiver will return to factory default parameters by using thisfunction.Press MENU key.Select ‘Installation’ with or , and press .ScreenSelect ‘Factory Set’ with or , and press .ScreenWhen the menu asks you to confirm the reset, press if you want to resetor press EXIT key if you want to void the reset.Note : Please be careful when you do 'Factory Set' because channel listinformation is deleted.LNB ConfigurationAntenna SetupSatellite ScanTP Edit/ScanFactory SetInstallation-Next, -Prev.LNB ConfigurationAntenna SetupSatellite ScanTP Edit/ScanFactory SetInstallation-Next, -Prev.Do you want to reset all data?Yes / NoQ
57You can use this menu when you change a TV channel to a Radio channel orvice versa.Press ‘TV/RADIO’.When listening a radio channel, ‘r001’ will be displayed on the front panel.2TV / RADIO switchingThis function is used for receiving a signal through the RF modulator.If your receiver has no 'TV ANT IN' terminal in the rear panel, this key may notwork.Press ‘TV/SAT’. The signal reception path will change to RF modulator and‘TV/SAT’ LED on front panel will be lit.The signal output through the RF modulator will be as follows :TV/SAT LEDPower ON Power OFFON TV ANT IN signal will be out.OFF Decoded signal will be out TV ANT IN signal will be out.through RF.1TV / SAT switching
58You can check the channel information on the channels of the transponderyou are watching.Press GUIDE key, then the following menu will be displayed.ScreenNote : 1. You can check local time, channel name, and other brief informa-tion on the current program.2. If you didn't set local time under ‘System Parameters’ section, theGUIDE function may not work properly.3. EPG information is delivered by satellite from service providers. If the channel does not carry any signal on the guide data, this function may not work properly.Select Channel with / . Then you can see current or next program information of the selected channel.If you press GREEN, current or next program information would be convert-ed to next or current program information respectively.Screen3GUIDE(EPG:Electronic Program Guide)Program Guide-Schedule, -Extended, -Record-Current/Next,19:3319:23 19:53CurrentJOURNAL News - Sports -Weather - Interview12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMJOURNAL Ne..Program Guide-Schedule, -Extended, -Record-Current/Next,19:3319:23 19:53CurrentJOURNAL News - Sports -Weather - Interview12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMJOURNAL Ne..Program Guide-Schedule, -Extended,-Current/Next,19:3419:53 20:23NextIn Focus12345678Fujian 1DIGITL VIDANHUI TVNMCHTVGuangdong 1Hunan 1DWtvMCMIn Focus-Record
59If you press YELLOW, you can see program schedule list of the selectedchannel.ScreenIf you want to see program information of a program in the program sched-ule list, select the program with / . Then you can see the program information in the right window.ScreenIf you press BLUE, you can see extended program information of the select-ed program.ScreenProgram Guide-Schedule, -Extended,-Current/Next,19:39Guest: Marianne Birthler Commissionerfor Stasi Files [7] DWtv11/03/1998 19:27~19:57JOURNAL News-Sports-Weather - Interview-ReserveProgram Guide-Schedule, -Extended,-Current/Next,19:3919:27~19:5719:57~20:2720:27~20:5720:57~21:2721:27~21:5721:57~22:2722:27~22:5722:57~23:27JOURNAL News - Sports..In FocusJOURNAL Nachrichten - ..ThemaJOURNAL News - Busines..Germany LiveJOURNAL Nachrichten - ..Im Focus [7] DWtv11/03/1998 19:27~19:57JOURNAL News-Sports-Weather - Interview-ReserveProgram Guide-Schedule, -Extended,-Current/Next,19:4219:27~19:5719:57~20:2720:27~20:5720:57~21:2721:27~21:5721:57~22:2722:27~22:5722:57~23:27JOURNAL News - Sports..In FocusJOURNAL Nachrichten - ..ThemaJOURNAL News - Busines..Germany LiveJOURNAL Nachrichten - ..Im Focus [7] DWtv11/03/1998 20:27~20:57JOURNAL Nachrichten -Wirtsohaft - Wetter -Tagesthema-Reserve
60You can set up automatic power on-off (Timer) or automaticrecording on the program schedule list. After press YELLOW in theGuide( EPG) menu, select a program with /or /and press .Select 'Once/Daily/Weekly/No' of 'Status' with or .Select ‘HD record’ and set ‘ON’ with if you want to record automatically.ScreenPress to save the new 'Timer' setting.ScreenPress MENU,EXIT or to finish GUIDE menu.Note : 1. Without 'STATUS' being actuated (Yes), 'Timer' does not work.2. If a program of prior time than current time ('Local Time' in 'SystemParameters' menu) is selected, Timer does not work.3. Refer to 'Setting Timer' in 'System Parameters' in this manual.Program Guide-Schedule, -Extended-Current/Next,19:4219:27~19:5719:57~20:2720:27~20:5720:57~21:2721:27~21:5721:57~22:2722:27~22:5722:57~23:27JOURNAL News - Sports..In FocusJOURNAL Nachrichten - ..ThemaJOURNAL News - Busines..Germany LiveJOURNAL Nachrichten - ..Im Focus [7] DWtv11/03/1998 20:27~20:57JOURNA chrichten -Weather -- Wetter -11/03/1998 20:26TimerStatusHD record11/03/1998 21:02-Reserve, -CancelEOnceONProgram Guide-Schedule, -Extended-Current/Next,19:4219:27~19:5719:57~20:2720:27~20:5720:57~21:2721:27~21:5721:57~22:2722:27~22:5722:57~23:27JOURNAL News - Sports..In FocusJOURNAL Nachrichten - ..ThemaJOURNAL News - Busines..Germany LiveJOURNAL Nachrichten - ..Im Focus [7] DWtv11/03/1998 20:27~20:57JOURNA chrichten -Weather -- Wetter -11/03/1998 20:26TimerStatusHD record11/03/1998 21:02-Reserve, -CancelENoONProgram Guide-Schedule, -Extended-Current/Next,19:4219:27~19:5719:57~20:2720:27~20:5720:57~21:2721:27~21:5721:57~22:2722:27~22:5722:57~23:27JOURNAL News - Sports..In FocusJOURNAL Nachrichten - ..ThemaJOURNAL News - Busines..Germany LiveJOURNAL Nachrichten - ..Im Focus [7] DWtv11/03/1998 20:27~20:57Wirtsohaft - Wetter -TagesthemaReserved at Timer #1!
61You can adjust the subtitle and audio condition/status of the current channel.Press ‘AUDIO’ and subtitle and audio related window will be displayed on the screen.ScreenIn this example, program spoken language is 'English' and user's selectedsubtitle language is 'Swedish'. ScreenThe contents of each parameter are as follows ;Note : These subtitle and audio parameters are workable only when thereceiving channel supports these functions.-Subtitle On/OffSubtitle TrackAudio TrackAudio ModeDig.Output2 of 10 [Swedish]1 of 8 [English]StereoNon-compressedSubtitle/Audio4Subtitle/AudioSubtitle Track (Subtitle language #) of (all subtitle language available in thisprogram)[ Current selected subtitle language ]Audio Track (Audio track #) of (all tracks available in this program )[spoken language in this program ] Audio Mode Stereo -> Mono-Left -> Mono-RightDig.Output Non-compressed / Compressed
62Teletext Service is text data service from Service Provider.It is available only when the satellite signal carries teletext service data.Press BLUE key and wait. If ‘*’ sign is pop up in the left upside of the screen as the following picture, waituntil teletext service menu is displayed because ‘*’ means 'This program pro-vides teletext service. So wait a moment'.ScreenTeletext Service Data is displayed as following picture. ScreenSelect your interesting item with numeric keys. For example, if you want tosee about 'CITY GUIDE', press .Screen5Teletext
63Your receiver will automatically power-off when the time you set is passed.Press ‘SLEEP’ key until the right time you want appears.ScreenNote : 1. You can set SLEEP TIMER in 30 minute steps up to 150 minutes.2. The SLEEP TIMER does not work while you are in ‘MENU’,‘GUIDE’ or ‘CHANNEL LIST’.6Sleep Timer
64Brief information is displayed, such as current channel type, name, localstart/end time, guide information, current time, fav/normal mode, Audiomode and Audio ID.Press INFO, then the information bar will pop-up.ScreenNote : If you have no information :- Check your local time setting is correct.- Information is not sent by the channel provider.5 DWtvJOURNAL News-Busin...13:4113:26 ~ 13:56((((((1/8AsiaSat 27Channel / Information
65You can record the current channel by pressing RED( ) key.If Program Guide menu has poped-up, you can record any channel youwant.Press RED( ) key to record current channel.In Program Guide menu, press RED( ) key to record after selecting a pro-gram you want.Then Record dialog menu will be displayed. ScreenSome items can be edited in Record dialog menu.Note : Default recording duration time is setted for 2 hours or the dnrationtime of scheduled program is setted for its scheduled time.Press to start recording.ScreenProgram Guide-Record, -Exit,E~11:19 Currentnt00:36 00:350-Edit9171819CH 22 - IndueCHSa NameInformationstartStopRECSABo TV NotwoDefault Event11:1900:401Start RecordingHD-Program Guide-Delete, -Satellite Mode11:20RECTitlePlay time REC28/08/2001 11:20Free 38.8 GB (99.4%) Default EventPlay Type1 Default Event/ -Wotoh,R
66Note : When a program is recorded, only the program stored in HD can beplayed and red R-icon is displayed.Current recorded program is played automatically a little while later.To stop recording mannally, you must enter HD-Program Guide menu andpress ORANGE(LIST) key.If any program has been played, press ORANGE(LIST) key to enter HD-Program Guide menu.If HD-Program Guide menu is displayed.Press ORANGE(LIST) key to stop recording. ScreenNote : If there are any user inputs in HD-Program Guide for 5-minutes withoutany playing and recording, your receiver will go automattically topower-off.HD-Program Guide-Delete, -Satellite Mode11:20RECTitlePlay time REC28/08/2001 11:20Free 38.8 GB (99.4%) Default EventPlay Type1 Default Event/ -Wotoh,RDo you want to stop recording? Yes /QNo E2Stop Recording
67You must select a program to play stored programs.For entering HD-Program Guide menu, press ORANGE(LIST) key.Press ORANGE(LIST) key.In HD-Program Guide, select a program by pressing or .ScreenPress to start playing. Note : For controlling trick play mode, you must press or INFO key thenHD-Information Bar will pop-up.HD-Program Guide-Delete, -Satellite Mode11:5200:0100:0300:0100:0100:25TitlePlay time 00:0328/08/2001 11:22Free 37.3 GB (95.6%) CH 23 - IndusPlay Type12345Default EventCH 23 - IndusCH 25 - DBN24RAI InternatiCH 22 - Indus/ -Wotoh,1Start Playing
IMPORTANT SAFETY INSTRUCTIONSAll the safety and operating instructions should be readbefore the product is operated.The safety and operating instructions should beretained for future reference.All warnings on the product and in the operatinginstructions should be adhered to.All operating and using instructions should be followed.Unplug this product from the wall outlet beforecleaning.Do not use liquid cleaners or aerosol cleaners, Usedamp cloth for cleaning.Do not use attachments not recommended by theproduct manufacturer as they may cause hazards.Do not use this product near water - for example, near abath tub, wash bowl, kitchen sink or laundry tub; in awet basement; or near swimming pool; and the like.Do not place this product on an unstable cart, stand,tripod, bracket, or table, The product may fall, causingserious injury to a child or an adult and serious damageto the product. Use only with a cart, stand, tripod,bracket, or table recommended by the manufacturer, orsold with the product. Any mounting of the productshould follow the manufacturer’s instructions, andshould use a mounting accessory recommended by themanufacturer.A product and cart combination should be moved with care. Quick stops, excessive forcesand uneven surfaces may cause the product and cart combination to overturn.WARNINGTo prevent fire or shock hazard, do not exposethe unit to rain or moisture.AVISPOUR EVITER LE RISQUE D’INCENDIE OU CHOC ELECTRIQUE-NEPAS EXPOSER L’APPAREIL A LA PLUIE OU LA MOITEURATTENTION : RISQUE CHOC LELECTRIQUE-NE PAS OUVRIRCAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCKDO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDEREFER SERVICING TO QUALIFIED SERVICE PERSONNELRISK OF ELECTRIC SHOCK,DO NOT OPENThis symbol is intended to alert the user to thepresence of uninsulated "dangerous voltage"within the product's enclosure that may be ofsufficient magnitude to constitute a risk of electricshock to persons.This symbol is intended to alert the user to thepresence of important operating andmaintenance(servicing) instructions in theliterature accompanying the appliance.CAUTION : TO PREVENT ELECTRIC SHOCK. MATCHWIDE BLADE OF PLUG TO WIDE SLOT,FUSE INSERT.ATTENTION : POUR ÉVITER LES CHOC ÉLECTRIQUES.INTRODURE LA LAME LA PLUS LARGEDE LA FICHE DANS LA BORNECORRESPONDANTE ED LA PRISE ETPOUSSER JUSOU’AU FOND.NOTE TO CATV SYSTEM INSTALLER : THIS REMINDERIS PROVIDED TO CALL THE CATV SYSTEMINSTALLER’S ATTENTION TO ARTICLE 820-40 OF THENEC THE PROVIDES GUIDELINES FOR PROPERGROUNDING AND, IN PARTICULAR, SPECIFIES THATTHE CABLE GROUND SHALL BE CONNECTED TOTHE GROUNDING SYSTEM OF THE BUILDINGS ASCLOSE TO THE POINT OF CABLE ENTRY ASPRACTICAL.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protectit from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placingthe product on a bed, sofa, rug, or other similar surface. The openings should not be placed in a built-in installation such asa bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.This product should be operated only from the type of power source indicated on the marking label. If you are not sure ofthe type of power supply to your home, consult your product dealer or local power company. For porducts intended tooperate from battery power, or other sources, refer to the operating instructions.This product may be equipped with a polarized alternating-current line plug(a plug having one blade wider than the other).This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into theoutlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Donot defeat the safety purpose of the polarized plug.Power supply cord should be routed so that they are not likely to be walked on or pinched by items placed upon or againstthem, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from theproduct.If an outside antenna or clable system is connected to the product, be sure the antenna or cable system is grounded so asto porvide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code,ANSI/NFPA 70, provides information with regard to proper grounding of the mest and supporting structure, gorunding ofthe lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connectionto grounding electrodes, and requirements for the grounding electrode.For added protedtion for this product during a lighting storm, or when it is left unattecded and unused for long periods oftime, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the productdue to lightning and power-line surges.An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or powercircuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme careshould be tacken to keep from touching such power lines or circuits as contact with them might be fatal.Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire orelectric shock.Never push any kinds of objects into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill any kind of liquid on the product.Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:When the power supply cord or plug is damaged.If liquid has been spilled, or objects have fallen into the product.If the product has been exposed to rain to water. If the product does not operate normally by following the operatinginstructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of othercontrols may result in damage and will often require extensive work by a qulaified technician to restore the product to itsnormal operation.If the product has been dropped or damaged in any way.When the product exhibits a distinct change in performance - this indicates a need for service.When replacement parts are required, be sure the service technician has used replacement part specified by themanufacturer or have the same characteristics as the original part. Unauthorized subsitutions may result in fire, electric
shock, or other hazards.Upon completion of any service or repair to this product, ask the service technician to perform safety checks to determinethat the product is in proper operating condition.The product should be situated away from heat sources such as radiators, heat registers, stoves, or otherproducts(including amplifiers) that produce heat.NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance withthe instruclions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by tuming theequipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet of a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio / TV technician for assistance.

Navigation menu