Hyundai Digital Technology STB-100H Digital Cable Receiver User Manual HSC 1190NA manual

Hyundai Digital Technology Co., Ltd. Digital Cable Receiver HSC 1190NA manual

User Manual

E M C STB-100HUSER'S MANUALDIGITAL CABLE RECEIVER
CONTENTS1. Notice 22. Safety/Precautions 2 2.1. Safety 2.2. Precautions3. Menu Map 34. Front Panel 45. Rear Panel 56. Operation 67. Specifications 7Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ◎ Reorient or relocate the receiving antenna. ◎ Increase the separation between the equipment and receiver. ◎ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ◎ Consult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by the manufacturer could void the user's authority to operated the equipment under FCC rules.
Safety/Precautions1.1 Notice * Theft of service is a crime. * Installing this device without permission or unauthorized tampering, modifying or altering it in any way may subject you to civil or criminal penalties. WARNING : To prevent electric shock, DO NOT REMOVE COVER. No user serviceable parts inside.2.1 Safty * Be sure to read the user's manual before starting the operation of the unit. * Do not touch the power cord with wet hands as it may cause electric shock. * Never open the cover. It is very dangerous to touch the inside of the unit due to possible electric shock. * Place the unit in a well ventilated and no-heat environment. * When you do not use this unit for a long time, make sure that power cord is pulled out from the outlet. Also do not use a damaged power cord as it may cause fire or electric shock. * A professional installation is required. If reception is interrupted, contact Melita Cable customer service.2.2 PrecautionsWhen installing the unit * Install the unit horizontally. An uneven installation may cause the unit to be damaged. * Do not put heavy items such as a TV on the unit. That may cause the unit to be damaged. * Do not leave the unit where the water drops or splashs. * Do not put water holding items such as vase on the unit. Where it is subject to vibrations Where it is exposed to direct sunlight Where there is humidity Where the temperature is too high or too low. Where there is no ventilation * Moving the unit to a hot area from a cold one will cause condensation. * Do not operate the unit for one or two hours or until it has dried completely.
Menu Map3. Menu MapMain Menu channel List TV ChannelsMUSIC ChannelsApplicationsFavorite ListParental ControlLanguageTimerConfigration Display PreferencesTV/VCR SetupDecoder InfoSoftware upgradeDiagnoseFactory Reset
Front panel4. Front Panel1. Standby/Power on Indication light : Turn on red light while in “standby mode” and turn off red light while in “power on mode”.2. Remote Control Indication light : Flashes green when receiving data from Remote Control Unit.3. Power : To switch the receiver in "standby mode” or in “power on mode”.4. Remote Sensor : Receives the infrared signal from Remote Control Unit.5. To launch or terminate the menu application.6. : To activate a highlighted item or go to next level on hypertext menu or confirm the user’ s action.7. channel : To change channel or cursor position on the application screen.8. Volume : To adjust the volume level or change the value of an item9. Smart Card Slot : Insert a smart card fully into the slot.1 234567 8 9
REAR PANEL VIEW4. REAR PANEL VIEWNo Name Connector Function1TV OUT(Ch 3/4)IEC 169-24, femaleRF re-modulation output.2CABLE INPUTIEC 169-24, femaleCable signal input to Digital tuner.3CVBS RCA cinch Composite video output.4S/PDIF RCA cinch Digital Audio output.5AUDIO L RCA cinch X2 Left audio output.6AUDIO R RCA cinch X2 Right audio output.7S-VIDEO 4p Din s-video video output8MODEM RJ-11 Connection to teline9AC INPUT EN60320 AC power output1 23 4 56789
REMOTE CONTROL UNIT5. Remote Control Unit1. POWER : To switch into ‘standby’ or power on’ mode.2. Homepage : Moving to selected homepage3. TV : Show the TV channel4. Music : Show the music channel5. PPV6. Back:To return previous channel.7. Exit:To return to previous status or menu8. Volum:To adjust the volume level.9. Channel:To change channel.10. Mute:To turn the sound on/off.11. Program :selection program12. Laguege:To change the Laguege 13. Menu:To enter the main menu.14. Subtitle:To see Subtitle.15. Favorite:To see Favorite channel list.16. Function&Hotkey2. Home3. TV4. Music5. PPV8. Volum10. Mute12. Laguage14. subtitle6. Back1. Power7. Exit9. Channel11. Program15. Favorite13. Menu16. Function&Hotkey
Operation6. Channel scanning- Press number key"007911" in above main menu- After entering "scan network" menu, set up below values according to network set up.* Frequency: Using number key in RCU* Symbol rate: Using number key in RCU* Modulation: Using right/left key in RCU- After finishing network set up, press OK key in order to signal locking.- After checking Level and Quality, press exit key.
Specifications7. SpecificationsSystem capabilities Fully DVB-C(QAM) systemConnector IEC 169-24, femaleInput Frequency range 47~862MhzSignal level -15 ~ +15 dBmVTuner input & Input Impedance 75 ohmModulation Format 64, 128, 256 QAMFEC Annex A & CFront end CABLESymbol rate 4 ~ 5.2MspsIF Band width 6 MHzProcessor 32bit processorSDRAM 16MbyteFLASH 8MbyteEEPROM 32KbyteVideo Decoder MPEG 2 Main Proflie @ Main LevelData Rate up to 15M bits/sResolution 720 X 480Video format NTSCAspect Ratio 4:3, 16:9MPEG Audio MPEG 1 layer 1 & 2Type Mono, Dual mono, Stereo, Joint StereoSampling rates 32, 44.1 and 48 KHzRemote control Code NEC-IROperating condition up to 7 MeterPower supply Power consumption 20WSupply voltage 90 ~ 250V Supply frequency 50Hz ~ 60HzRear panel CVBS Video output (1 cinch)Connectors RCA Connector Audio L/R output(4 cinch)Digital Audio output(1 cinch)Digital tuner input IEC 169-24, femaleRF out put IEC 169-24, femalePhysical Size(W X H X D) 260 X 53.5 X 235 (mm)Specification Weight(Net) 2.3Kg

Navigation menu