Hyundai IBT L15A0C062 15 inch LCD Monitor User Manual

Hyundai IBT Corp. 15 inch LCD Monitor Users Manual

Users Manual

ImageQuest L550STFT LCD Color MonitorUser's GuideClickwww.imageQuest.co.krNEXTType No. L15A0C062
U.S.A.U.S.FEDERAL COMMUNICATIONS COMMISSIONRADIO FREQUENCY INTERFERENCE STATEMENTINFORMATION TO THE USERNOTE : This equipment has been tested and found to comply with the limits for aClass B digital device pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmfulinterference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, ifnot installed and used in accordance with the instructions, may cause harmfulinterference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures:   Reorient or relocate the receiving antenna.   Increase the separation between the equipment and receiver.   Connect the equipment into an outlet of a circuit different from that to which the receiver is connected.   Consult the dealer or an experienced radio/TV technician for assistance.Changes or modification not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.Connecting of peripherals requires the use of grounded shielded signal cables.BACKNEXT
WE                        ImageQuest CO., LTD.Ami-ri Bubal-Eub Ichon-Si Kyungki-Do467-860  KOREAdeclare under our sole responsibility that the product:to which this declaration relates is in conformity with thefollowing standard(s) or other normative document(s)following the provisions of the Low Voltage Directive 73/23/EEC,93/68/EEC and the EMC Directive 89/336/EEC.KOREA / June  20,  2001                   HONG  KI, KIM(Place and date of issue)                     (Name and signature of authorized person)DECLARATION OF CONFORMITY BACKNEXTKind of equipment          :         COLOR MONITORType-Designation             :         L15A0C062Safety    : EN 60950 : 1992 + A1, A2, A3, A4EMC      : EN 55022 : 1998, EN 55024 : 1998EN 61000-3-2 : 1995+A1 : 1998+A2 : 1998EN 61000-3-3 : 1995Accredited testlaboratory:TÜV RheinlandAm Grauen Stein51105 Köln
L550S15" TFT LCD Color MonitorBACKNEXTContents4. Adjusting the picture ................9/174-1. Using the On Screen Display ........10/174-2. Direct access buttons ....................10/174-3. OSD Adjustments ........................11/175. Display power management ..13/17Reducing power consumption .........13/176. Troubleshooting ......................14/177. Specifications ..........................17/171. Introduction ...............................1/172. Safety Information ...................1/173. Installing the monitor ..............4/173-1. Packing List ....................................4/173-2. Selecting a suitable location .........5/173-3. Connecting the monitor ................5/173-4. Setting the refresh rate ................7/17Preset Timing Table .......................8/17
L550S15" TFT LCD Color Monitor1. Introduction2. Safety Information1/17BACKNEXTThis manual contains instructions for installing and operating ImageQuest L550S.    ImageQuest L550S is a highly ergonomic color display unit.•     15" viewable XGA LCD•     Supporting full scan flicker-free picture quality•     With On Screen Display menus for user control•     100-240V AC input voltage•     VESA DPMS (Display Power Management Signalling)•     VESA DDC1/2B compatibilityThis Monitor has been engineered and manufactured to assure your safety. You can prevent serious electrical shock and other hazards by keeping in mind the following:Do not place anything wet on the monitor or the powercord. Never cover the ventilation openings with anymaterial and never touch them with metallic or inflammable materials.Avoid operating the monitor in extreme heat, humidity or areas affected by dust. Temperature : 5~35°CHumidity : 30~80RH
L550S15" TFT LCD Color Monitor2/17BACKNEXTBe sure to turn the monitor off before plugging thepower cord into the socket. Make sure that the powercord and the other cords are securely and rightlyconnected.Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and broken plugs, which may cause electric shock or fire. Call your service technician for replacement.Do not use sharp tools such as a pin or a pencil near the monitor, as they may scratch the LCD surface.Do not use a solvent, such as benzene, to clean the monitor, as it will damage the LCD surface.
L550S15" TFT LCD Color MonitorCleaning and Maintenance •     To avoid risk of electric shock, do not disassemble the display unit cabinet. Theunit is not user-serviceable. Remember to unplug the display unit from thepower outlet before cleaning.•     Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do notuse thinner or benzene, abrasive cleaners or compressed air.•     Do not wipe the screen with a cloth or sponge that could scratch the surface.•     To clean your antistatic screen, use water and a special microfiber screencleaning tissue used in optical lens cleaning, or lightly dampen a soft, cleancloth with water or a mild detergent.•     If the instructions above do not help in removing stains, contact an authorizedservice agent. 3/17BACKNEXT
L550S15" TFT LCD Color Monitor4/17BACKNEXTThe following items should be found in the packaging.Above power cord can be changed upon different voltage areas. Pleasecontact your dealer if anything is missing or damaged.Other power cord except the cord packed in the product or longer than 3mmay affect EMC of the product in operating condition.3. Installing the monitor3-1. Packing List!UKAmerica/CanadaJapanAustraliaKoreaEuropeSouth AfricaPower cordSignal cableCompact Disc
L550S15" TFT LCD Color Monitor5/17BACKNEXT3-2. Selecting a suitablelocation3-3. Connecting the monitor•     Place the monitor at least 30cm from other electrical or heat-emittingequipment and allow at least 10cm on each side for ventilation.•     Place the monitor in a position where no light shines directly onto or isreflected on the screen.•     To reduce eye strain, avoid installing the display unit against a brightbackground such as a window.•     Position the monitor so that the top of the screen is no higher than eye level.•     Position the monitor directly in front of you at a comfortable reading distance(around 45 to 90cm) Before you start cabling your monitor, check that thepower is off on all units. To avoid any possibility ofelectric shock, always connect your equipment toproperly earthed outlets.1.    Insert the other 15-pin signal cable connector into the 15-pin VGA connectionon your computer and screw it down. 2.    Plug the power cord connection to connection on the monitor.3.    Plug the other end of the  power cord to your computer's main supply or to a100V-240V earthed electrical outlet.4.    Turn on the monitor using the power switch and check that the power LED ison. If not, repeat steps 1,2,3 and 4 or refer to the Troubleshooting section ofthis guide.!!
L550S15" TFT LCD Color Monitor6/17BACKNEXT5.    Turn on the power to the computer. The picture will appear within about 10seconds. Adjust the picture to obtain optimum picture quality. See sectionAdjusting the picture in this guide for more information.
L550S15" TFT LCD Color Monitor7/17BACKNEXT3-4. Setting the refreshrate Follow the instructions below to set your refresh rate in Windows 98.1.    Go to the configuration window(Start-Settings-Configuration window).2.    Double click on the ‘Display’ icon.3.    Click on the ‘Settings’ tab.4.    Click on the ‘Advanced’ button.5.    Click on ‘Adapter’ and select 60Hz from the list.6.    Click on ‘Apply’ to accept the selected value.LED Indicator Soft Power Switch
L550S15" TFT LCD Color MonitorPreset Timing Table If the signal from the system doesn't equal to the preset timing mode, adjustthe mode with reference to the user guide of videocard because the screenmay not be displayed.The recommended setting is a resolution of 1024x768 and a refresh rate of 60Hz.8/17BACKNEXT!No. 1 2 3 4 5   6   7   8   9 10 11 12 13Resolution640 x 350640 x 400720 x 400640 x 480640 x 480800 x 600800 x 600800 x 600800 x 600832 x 624* 1024 x 7681024 x 7681024 x 768Horizontal Frequency31.5 KHz31.5 KHz31.5 KHz31.5 KHz37.9 KHz35.2 KHz37.9 KHz48.1 KHz46.9 KHz49.7 KHz48.4 KHz56.5 KHz60.0 KHzRefresh rate70 Hz70 Hz70 Hz60 Hz73 Hz56 Hz60 Hz72 Hz75 Hz75 Hz60 Hz70 Hz75 Hz* Recommended primary mode.
L550S15" TFT LCD Color Monitor4. Adjusting the picture9/17BACKNEXTYou can adjust the screen display by using the buttons located below thescreen.
L550S15" TFT LCD Color Monitor10/17BACKNEXT1.    Push the MENU button to call the OSD to the screen. The resolution andfrequency are displayed at the top of the menu box for your information.The resolution is displayed only when the monitor works in the presetmode.2.    Push the      or      button to choose the item you want to adjust. The  selecteditem is highlighted.3.    Push the SELECT button to adjust the highlighted item. 4.    Use the      or      button to adjust the selection.5.    Push the MENU button to return to the previous menu if you are in a submenu.6.    The display unit automatically saves the new settings in 1 second after yourlast adjustments and the menu disappears. You can also push the MENU buttonto make the menu disappear.BRIGHTNESS Use the button     to select the brightness adjustment. Adjust with      or      button.CONTRASTUse the button      to select the contrast adjustment. Adjust with      or      button.AUTO ADJUSTPush the button SELECT (AUTO) to adjust the shape of screenautomatically.4-1. Using the On ScreenDisplay 4-2. Direct access buttons!SELECTSELECTSELECT
L550S15" TFT LCD Color Monitor11/17BACKNEXT4-3. OSD AdjustmentsYou can play the moviefile to see how to adjustthe picture image byclicking each icon or titlehereunder.The OSD adjustments available to you are listed below.BRIGHTNESSAdjusts the brightness of the screen.CONTRASTAdjusts the contrast of the screen.H-POSITIONAdjusts the horizontal position of the entire screen image.V-POSITIONAdjusts the vertical position of the entire screen image.CLOCK (WIDTH)Adjusts the horizontal size of the entire screen image.CLOCK-PHASEAdjusts the noise of the screen image.AUTO ADJUSTAdjust the shape of screen atomatically.COLOR CONTROLColor temperature affects the tint of the image. With lower color temperatures the image turns reddish and with higher temperatures bluish.
L550S15" TFT LCD Color Monitor12/17BACKNEXTThere are three color settings available: Mode 1(a cool white), Mode 2(awarm white) or USER. With the USER setting you can set individualvalues for red, green and blue.INFORMATIONInformation shows the horizontal and vertical frequency of your display unit. The Information menu lists modes which are preset at the factory and modes which have been defined by user. It also shows you the mode your display unit is currently operating in. you can set the display mode (frequency and refresh rate) in Windows.LANGUAGEYou can select the language in which adjustment menus are displayed. The following languages are available: English, French, German, Italian, Spanish, Swedish, Finnish, Danish, Portuguese and Japanese or Korean.OSD ADJUSTYou can adjusts the OSD menu's horizontal or vertical position on the screen. You can also adjust display time of the OSD menu from 5 to 50 seconds.TESTDisplays  internal test pattern.The Clock Phase may not be optimized when the input timing is notcomply with VESA standard timing. In order to get the optimized resultof Auto Adjust Function, it is recommended to display bright color imageon the entire screen before proceeding Auto Adjust Function.!
L550S15" TFT LCD Color MonitorIf the power management function of your computer is enabled, your monitorturns on and off automatically. You can control power management features fromyour computer.Your computer may have power management features which enable the computeror monitor to enter a power saving mode when the system is idle. You canreactivate the system by pressing any key or moving the mouse.The power button does not disconnect the monitor from the mains. The onlyway to isolate the monitor completely from the mains supply is to unplug themains cable.13/17BACKNEXT5. Display power managementReducing powerconsumptionPower consumption40 W5 WModeNormaloffLEDGreenOrange!
L550S15" TFT LCD Color Monitor6. Troubleshooting14/17BACKNEXTProblemBlank screenError message:Video mode notsupportedThe display does not enter power managementmodePossible solutionIf the power LED is not lit, push the Soft power switch or check theAC cord to turn the monitor on. If the display unit is poweredthrough the computer, check that the computer is switched on.The display unit might be in standby mode. Push one of thekeyboard keys. Check that the keyboard is properly connected tothe computer.Check that the signal cable connector is properly connected and thatthe connection pins are not bent or damaged. If the connector isloose, tighten the connector's screws.Check that the power cable is correctly connected to the display unitand to the power outlet. Check the resolution and the frequency on the video port of yourcomputer.Compare these values with the data in the Preset Timing Table.The video signal from the computer does not comply with VESADPMS standard. Either the computer or the graphics adapter is notusing the VESA DPMS power management function.If your monitor is not functioning properly, you may be able to solve the problemby reading followings.
L550S15" TFT LCD Color Monitor15/17BACKNEXTPossible solutionCheck that the signal cable connector is properly connected and thatthe connection pins are not bent or damaged. Try another colortemperature. Adjust the picture characteristics as described in the sectionAdjusting the picture.A problem with your graphics adapter or display unit. Contact yourservice representative.Check that the display resolution and frequency from your PC orgraphic adapter is an available mode for your monitor.In your PC, you can check through Control panel, Display, Settings.If the setting is not correct, use your computer utility program tochange the display settings.ProblemColor defectsSize, position,shape or qualityunsatisfactoryDuplicatedimagesImage is notstable
L550S15" TFT LCD Color Monitor16/17BACKNEXTContacting service If the above troubleshooting hints do not help you find a solution to the problem, contact an authorized service agent. If the monitor is sent for service, use the original package if possible.Unplug the display unit from the power outlet and contact a service agent when:•     The monitor does not operate normally according to the operating instructions.•     The monitor exhibits a distinct change in performance.•     The monitor has been dropped or the cabinet has been damaged.•     The monitor has been exposed to rain, or water or liquid has been spilled ontothe monitor.
L550S15" TFT LCD Color Monitor17/17BACK15"viewable, DiagonalPixel pitch 0.297 mm, AM-TFT 180cd/m2(Min.), 200cd/m2(Typ.)40msec304 X 228 mm16,7 million colors (with dithering)R.G.B Analog, 15 pin D-subHorizontal : 31.0 to 60.0KHzVertical : 44 to 75Hz80 MHz1024X768@75Hz100-240 VAC 50/60Hz, 1.0A40WVESA DPMSVESA DDC 1/2BBRIGHTNESS, CONTRAST, H. POSITION, V. POSITION, CLOCK, CLOCK-PHASE, AUTO ADJUST, COLOR CONTROL,INFORMATION, LANGUAGE, OSD ADJUST, TESTTCOFCC Class B, CE,cULus, TÜV-GS, NEMKO, DEMKO, FIMKO, SEMKO5 ~ 35O C4.5Kg unpacked, 6.3Kg packed380X 385 X 174 mmLCDBrightnessResponse TimeDisplay areaNumber of colorInput signalsFrequency rateMaximum bandwidthMaximum resolutionInput voltagePower consumptionPower managementPlug & PlayOSD menuErgonomics,Safety and EMCOperating TemperatureWeightDimensions (W X H X D mm)•  Specification is subject to change without notice for performance improvement.7. Specifications

Navigation menu