Hyundai IBT L15B0C060 15-inch LCD Monitor User Manual

Hyundai IBT Corp. 15-inch LCD Monitor Users Manual

Users Manual

NEXTType No. L15B0C060User’s GuideImageQuest LM1510ATFT LCD Color MonitorClickwww.hyundaiQ.com
U.S.A.U.S.FEDERAL COMMUNICATIONS COMMISSIONRADIO FREQUENCY INTERFERENCE STATEMENTINFORMATION TO THE USERNOTE : This equipment has been tested and found to comply with the limits for aClass B digital device pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmfulinterference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, ifnot installed and used in accordance with the instructions, may cause harmfulinterference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet of a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for assistance.Changes or modification not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.Connecting of peripherals requires the use of grounded shielded signal cables.BACKNEXT
WE ImageQuest CO., LTD.Ami-ri Bubal-Eub Ichon-Si Kyungki-Do467-860 KOREAdeclare under our sole responsibility that the product:to which this declaration relates is in conformity with thefollowing standard(s) or other normative document(s)following the provisions of the Low Voltage Directive 73/23/EEC,93/68/EEC and the EMC Directive 89/336/EEC.KOREA / JAN. 19, 2002 HONG KI, KIM(Place and date of issue) (Name and signature of authorized person)DECLARATION OF CONFORMITY BACKNEXTKind of equipment : COLOR MONITORType-Designation : L15B0C060Safety : EN 60950 : 1992 + A1, A2, A3, A4, A11EMC : EN 55022 : 1998, EN 55024 : 1998EN 61000-3-2 : 1995+A1 : 1998+A2 : 1998EN 61000-3-3 : 1995Accredited testlaboratory:TÜV RheinlandAm Grauen Stein51105 Köln
LM1510A15" TFT LCD Color MonitorBACKNEXTContents 1. Introduction ...................................1/202. Safety Information .......................1/203. Installing the monitor ..................4/203-1. Packing List .........................................4/203-2. Selecting a suitable location .............5/203-3. Connecting the monitor ....................5/20USB Hub .............................................7/203-4. Setting the refresh rate .....................8/20Preset Timing Table ...........................8/203-5. VESA MOUNT’G ..................................9/203-6. PIVOT FUNCTION(Optional) .............10/204. Adjusting the picture ..................11/204-1. Using the On Screen Display ...........12/204-2. Direct access buttons ........................12/204-3. OSD Adjustments .............................13/205. Audio system ...............................15/206. Display power management ......16/20Reducing power consumption ...............16/207. Troubleshooting ..........................17/208. Specifications ..............................20/20
LM1510A15" TFT LCD Color Monitor1. Introduction2. Safety Information1/20BACKNEXTThis manual contains instructions for installing and operating ImageQuest LM1510A.ImageQuest LM1510A is a highly ergonomic color display unit.• 15" viewable XGA LCD• Supporting high full scan flicker-free picture quality• With On Screen Display menus for user control• With internal active stereo speakers• 100-240V AC input voltage• VESA DPMS (Display Power Management Signaling)• VESA DDC1/2B compatibility• High quality screen re-scaling capability• Fast and accurate auto adjustment• Most advanced image scaling• USB (Universal Serial Bus) hub• Supporting VESA Flat Panel Monitor Physical Mounting Interface• Pivot Function (Optional)This Monitor has been engineered and manufactured to assure your safety. You can prevent serious electrical shock and other hazards by keeping in mind thefollowing:Do not place anything wet on the monitor or the powercord. Never cover the ventilation openings with anymaterial and never touch them with metallic or inflammablematerials.
LM1510A15" TFT LCD Color Monitor2/20BACKNEXTAvoid operating the monitor in extreme heat, humidity or areas affected by dust. Temperature : 5~35°CHumidity : 30~80RH Be sure to turn the monitor off before plugging the power cord into the socket. Make sure that the power cord and the other cords are securely and rightly connected.Overloaded AC outlets and extension cords aredangerous, as are frayed power cords and broken plugs,which may cause electric shock or fire. Call your servicetechnician for replacement.Do not use sharp tools such as a pin or a pencil near the monitor, as they may scratch the LCD surface.Do not use a solvent, such as benzene, to clean the monitor, as it will damage the LCD surface.
LM1510A15" TFT LCD Color MonitorCleaning and Maintenance • To avoid risk of electric shock, do not disassemble the display unit cabinet. Theunit is not user-serviceable. Remember to unplug the display unit from thepower outlet before cleaning.• Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do notuse thinner or benzene, abrasive cleaners or compressed air.• Do not wipe the screen with a cloth or sponge that could scratch the surface.• To clean your antistatic screen, use water and a special microfiber screencleaning tissue used in optical lens cleaning, or lightly dampen a soft, cleancloth with water or a mild detergent.• To clean display unit cabinet, use a cloth lightly dampended with a milddetergent.3/20BACKNEXT
UKAmerica/CanadaJapanAustraliaKoreaEuropeSouth AfricaLM1510A15" TFT LCD Color Monitor4/20BACKNEXTThe following items should be found in the packaging.Above power cord can be changed upon different voltage areas. Pleasecontact your dealer if anything is missing or damaged.3. Installing the monitor3-1. Packing List!Power cordSignal cableUSB cableAudio cableCompact DiscAC/DC Power adapter
LM1510A15" TFT LCD Color Monitor5/20BACKNEXT3-2. Selecting a suitablelocation3-3. Connecting the monitor• Place the monitor at least 30cm from other electrical or heat-emittingequipment and allow at least 10cm on each side for ventilation.• Place the monitor in a position where no light shines directly onto or isreflected on the screen.• To reduce eye strain, avoid installing the display unit against a brightbackground such as a window.• Position the monitor so that the top of the screen is no higher than eye level.• Position the monitor directly in front of you at a comfortable reading distance(around 45 to 90cm) Before you start cabling your monitor, check that thepower is off on all units. To avoid any possibility ofelectric shock, always connect your equipment toproperly earthed outlets.1. Insert the other 15-pin signal cable connector into the 15-pin VGA connectionon your computer and screw it down. Connect the audio cable to the displayunit and the system unit.2. Plug the power cord connection to connection on the AC-DC Power adapter.3. Plug the jack of the AC-DC Power adapter connection to connection on monitor.4. Plug the other end of the power cord to your computer's main supply or to a100V-240V earthed electrical outlet.5. Turn on the monitor using the power switch and check that the power LED ison. If not, repeat steps 1,2,3 and 4 or refer to the Troubleshooting section ofthis guide.!
LM1510A15" TFT LCD Color Monitor6/20BACKNEXT6. Turn on the power to the computer. The picture will appear within about 10seconds. Adjust the picture to obtain optimum picture quality. See sectionAdjusting the picture in this guide for more information.
LM1510A15" TFT LCD Color MonitorUSB hub The USB hub(Bus-powered mode hub) have 1 upstream port and 2 downstreamports. The upstream port can be connected to the root hub of host PC or otherdownstream port. Two(2) downstream ports allow to connect another USBdevice such as USB mouse, joystick, printer etc.1) The maximum supply current of downstream port is 100mA each whenbus-powered mode hub.2) To activate the USB hub, your host system should have USB capability.7/20BACKNEXTUSB 2 downstream ports
LM1510A15" TFT LCD Color Monitor8/20BACKNEXT3-4. Setting the refreshratePreset Timing TableNo.12345678Resolution720 x 400640 x 480640 x 480800 x 600800 x 600*1024 x 7681024 x 7681024 x 768Horizontal Frequency31.5 KHz31.5 KHz37.5 KHz37.9 KHz46.9 KHz48.4 KHz56.5 KHz60.0 KHzRefresh rate70.1 Hz59.9 Hz75.0 Hz60.3 Hz75.0 Hz60.0 Hz70.1 Hz75.0 Hz* Recommended primary mode.!Follow the instructions below to set your refresh rate in Windows 98/ME/XP/2000.1. Go to the configuration window(Start-Settings-Configuration window).2. Double click on the ‘Display’ icon.3. Click on the ‘Settings’ tab.4. Click on the ‘Advanced’ button.5. Click on ‘Adapter’ and select 60Hz from the list.6. Click on ‘Apply’ to accept the selected value.If the signal from the system doesn't equal to the preset timing mode, adjustthe mode with reference to the user guide of videocard because the screenmay not be displayed.The recommended setting is a resolution of 1024x768 and a refresh rate of 60Hz.
LM1510A15" TFT LCD Color Monitor9/20BACKNEXT3-5. VESA MOUNT’G • This display unit supports VESA FPMPMI standard for 100mmx100mm screwmounting by giving 4 screw holes inside the base stand of the unit. The basestand shall be removed before connecting to Specialty Flat Panel MonitorMounting Device.• For buying VESA Flat Panel Monitor Mounting Devices, please contactfollowing information.* Ergotron, Inc.· Address : Ergotron Europe Kuiperbergweg 50 1101 AG Amsterdam The Netherlands· Tel : +3 1 20 696 60 65 · Fax : +3 1 20 609 04 59· E-mail : info.eu@ergotron.comDesk MountWall Mount
LM1510A15" TFT LCD Color Monitor3-6. PIVOT FUNCTION(optional)• Pivot allows the users to display a full page at time in either portrait or landscapeview.• In multiple monitor environments(like Window 98 or Mac OS), you can have onemonitor in landscape and another in portrait mode, for the best of bothenviroment!• Pivort software is option. So customers(or you) can purchase monitors togetherwith pivot s/w, or do not need to purchase the pivot s/w if you do not need it.• When you want to purchase the software separately, you can contact the belowcontact points of Portrait Display, Inc. or Hyundai regional branch offices.You can also obtain the software for counter value through the below website.* Portrait Display, Inc.· Address : 5117 Johnson Driver, Suite 100, Pleasanton, California, 94588 USA· Tel : +1 925 227 2700 ext. 222 · Fax : +1 925 227 2705· E-mail : http://www.portrait.com10/20BACKNEXT
LM1510A15" TFT LCD Color Monitor4. Adjusting the picture11/20BACKNEXTYou can adjust the screen display by using the buttons located right side ofthe screen.LED indicatorSoft power switch
LM1510A15" TFT LCD Color Monitor12/20BACKNEXT1. Push the MENU button to call the OSD to the screen. The resolution andfrequency are displayed at the top of the menu box for your information.2. Push the or button to choose the item you want to adjust. The selecteditem is highlighted.3. Push the SELECT button to adjust the highlighted item. 4. Use the or button to adjust the selection.5. Push the MENU button to return to the previous menu if you are in a submenu.6. The display unit automatically saves the new settings in 1 second after yourlast adjustments and the menu disappears. You can also push the MENU buttonto make the menu disappear.AUTO ADJUSTPush the button SELECT (AUTO) to adjust the shape of screenautomatically.CONTRAST Use the button to select the contrast adjustment. Adjust with or button.BRIGHTNESS Use the button to select the brightness adjustment. Adjust with or button.4-1. Using the On ScreenDisplay 4-2. Direct access buttons
LM1510A15" TFT LCD Color Monitor13/20BACKNEXT4-3. OSD AdjustmentsYou can play the movie file tosee how to adjust the pictureimage by clicking each icon ortitle hereunder.The OSD adjustments available to you are listed below.BRIGHTNESSAdjust the brightness of the screen.CONTRASTAdjust the contrast of the screen.COLOR CONTROLColor temperature affects the tint of the image. With lower color temperatures the image turns reddish and with higher temperatures bluish.There are three color settings available: Mode 1(a warm white), Mode 2(acool white) or USER. With the USER setting you can set individual valuesfor red, green and blue.H/V POSITIONH-POSITIONAdjusts the horizontal position of the entire screen image.V-POSITIONAdjusts the vertical position of the entire screen image.
LM1510A15" TFT LCD Color Monitor14/20BACKNEXTCLOCK PHASEPHASEAdjust the noise of the screen image.CLOCKAdjust the horizontal size of the entire screen image.AUTO ADJUSTYou can adjust the shape of screen automatically at the full screenpattern.MISCELLANEOUSRECALLRecall the saved color data.OSD TIMERYou can set the displayed time of OSD Menu window on the screen byusing this adjustment.OSD POSITIONAdjust the OSD menu's horizontal or vertical position on the screen.LANGUAGEYou can select the language in which adjustment menus are displayed. The following languages are available : English, French, German, Italian,Spanish, Swedish, Finnish, Danish, Portuguese and Dutch.
LM1510A15" TFT LCD Color Monitor15/20BACKNEXTThis monitor has an audio system including two micro loudspeakers. Each of twomicro loudspeakers has an 1Wrms (max.) output power. This system also supports aheadphone output jack.This system has been tuned to get a best tone quality which an audio inputlevel is under 600mVp-p. if the input level is more than 600mVp-p, you musttune down the audio input as the audio output tone may be distorted.5. Audio system!Audio VolumeHeadphoneOutput Audio INPUT
LM1510A15" TFT LCD Color MonitorIf the power management function of your computer is enabled, your monitorturns on and off automatically. You can control power management features fromyour computer.Your computer may have power management features which enable the computeror monitor to enter a power saving mode when the system is idle. You can reactivate the system by pressing any key or moving the mouse.The power button does not disconnect the monitor from the mains. The onlyway to isolate the monitor completely from the mains supply is to unplug themains cable.The power modes listed are for the monitor only and do not include any USBdevices connected to the USB ports.16/20BACKNEXT6. Display power managementReducing powerconsumptionPower consumption40 W5 W0 WModeNormaloffUnpluggedLEDGreenOrangeNot illuminated!
LM1510A15" TFT LCD Color MonitorProblemBlank screenError message:Video mode notsupportedThe display does not enter power managementmodePossible solutionIf the power LED is not lit, push the Soft power switch or check theAC cord to turn the monitor on. If the display unit is poweredthrough the computer, check that the computer is switched on.The display unit might be in standby mode. Push one of thekeyboard keys. Check that the keyboard is properly connected tothe computer.Check that the signal cable connector is properly connected and thatthe connection pins are not bent or damaged. If the connector isloose, tighten the connector's screws.Check that the power cable is correctly connected to the display unitand to the power outlet. Check the resolution and the frequency on the video port of yourcomputer.Compare these values with the data in the Preset Timing Table.The video signal from the computer does not comply with VESADPMS standard. Either the computer or the graphics adapter is notusing the VESA DPMS power management function.7. Troubleshooting17/20BACKNEXTIf your monitor is not functioning properly, you may be able to solve the problemby following the suggestions below :
LM1510A15" TFT LCD Color Monitor18/20BACKNEXTPossible solutionCheck that the signal cable connector is properly connected and thatthe connection pins are not bent or damaged. Try another colortemperature. Adjust the picture characteristics as described in the section OSDAdjustment(4-3).A problem with your graphics adapter or display unit. Contact yourservice representative.Check that the display resolution and frequency from your PC orgraphic adapter is an available mode for your monitor.In your PC, you can check through Control panel, Display, Settings.If the setting is not correct, use your computer utility program tochange the display settings.Check that the signal cabel connector is properly connected and thatthe connection pins are not bent or damaged.If the connector is loose, tighten the connector’s screws.Check that the computer is switched on.To enter a power saving mode. You can reactivate the system bypressing any key or moving the mouse.ProblemColor defectsSize, position,shape or qualityunsatisfactoryDuplicatedimagesImage is notstableMessage : No signalThe power LED is aorange color
LM1510A15" TFT LCD Color MonitorContacting service19/20BACKNEXTPossible solutionLED Indicator can be orange color on changing of video mode orInput Signal(D-sub).Check the Resolution and the frequency on the video part of yourcomputer. Compare these values with the data in the Preset TimingTable.ProblemThe power LED is aorange colorIf the above troubleshooting hints do not help you find a solution to the problem,contact an authorized service agent. If the monitor is sent for service, use theoriginal package if possible.Unplug the display unit from the power outlet and contact a service agent when:• The monitor does not operate normally according to the operating instructions.• The monitor exhibits a distinct change in performance.• The monitor has been dropped or the cabinet has been damaged.• The monitor has been exposed to rain, or water or liquid has been spilled ontothe monitor.
LM1510A15" TFT LCD Color Monitor20/20BACK8. Specifications15"viewable, Diagonal, Pixel pitch 0.297 mm, A-Si TFT200cd/m2(Min.), 250cd/m2(Typ.)20msec304 X 228 mm16.2 million colorsR.G.B Analog, 15 pin D-subHorizontal : 31.0 to 60.0KHz, Vertical : 56 to 75Hz80 MHz1024X768@75HzDC 12V/5V 2.0A / 2.0A40WVESA DPMSVESA DDC 1/2BBRIGHTNESS, CONTRAST, COLOR CONTROL, MISCELLANEOUS,AUTO ADJUST, LANGUAGE, H/V POSITION, CLOCK PHASE1up X 2down (Bus-Powered Hub)Audio Input : 600mVp-p Max.Output Power : 2 x 1W micro loudspeaker(std.)100 mm X 100 mm screw mountingTCO, FCC Class B, CE,cULus, TÜV-GS, SEMKO5 ~ 35O C5.3Kg unpacked, 6.5Kg packed387 X 388 X 201 mm90O(Clockwise)LCDBrightnessResponse TimeDisplay areaNumber of colorInput signalsFrequency rateMaximum bandwidthMaximum resolutionInput voltagePower consumptionPower managementPlug & PlayOSD menuUSBAudio systemVESA FPMPMIErgonomics,Safety and EMCOperating TemperatureWeightDimensions (W X H X D mm)Physical pivot• Specification is subject to change without notice for performance improvement.

Navigation menu