Hyundai IBT L15B0C060 15-inch LCD Monitor User Manual
Hyundai IBT Corp. 15-inch LCD Monitor Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 225927 |
| Application ID | QrjVaj09QomrxMDxf7kV5w== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 88.05kB (1100601 bits) |
| Date Submitted | 2002-02-12 00:00:00 |
| Date Available | 2002-02-12 00:00:00 |
| Creation Date | 2002-01-31 15:49:03 |
| Producing Software | Acrobat Distiller 4.0 for Macintosh |
| Document Lastmod | 2002-02-01 10:51:05 |
| Document Title | Users Manual |
NEXT Type No. L15B0C060 ImageQuest LM1510A TFT LCD Color Monitor User’s Guide Click www.hyundaiQ.com BACK U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet of a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for assistance. Changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Connecting of peripherals requires the use of grounded shielded signal cables. NEXT BACK DECLARATION OF CONFORMITY WE ImageQuest CO., LTD. Ami-ri Bubal-Eub Ichon-Si Kyungki-Do 467-860 KOREA declare under our sole responsibility that the product: Kind of equipment COLOR MONITOR Type-Designation L15B0C060 to which this declaration relates is in conformity with the following standard(s) or other normative document(s) Safety : EN 60950 : 1992 + A1, A2, A3, A4, A11 EMC : EN 55022 : 1998, EN 55024 : 1998 EN 61000-3-2 : 1995+A1 : 1998+A2 : 1998 EN 61000-3-3 : 1995 following the provisions of the Low Voltage Directive 73/23/EEC, 93/68/EEC and the EMC Directive 89/336/EEC. Accredited testlaboratory: TÜV Rheinland Am Grauen Stein 51105 Köln KOREA / JAN. 19, 2002 (Place and date of issue) HONG KI, KIM (Name and signature of authorized person) NEXT BACK LM1510A 15" TFT LCD Color Monitor NEXT Contents 1. Introduction ...................................1/20 2. Safety Information .......................1/20 3. Installing the monitor ..................4/20 3-1. Packing List .........................................4/20 3-2. Selecting a suitable location .............5/20 3-3. Connecting the monitor ....................5/20 USB Hub .............................................7/20 3-4. Setting the refresh rate .....................8/20 Preset Timing Table ...........................8/20 3-5. VESA MOUNT’G ..................................9/20 3-6. PIVOT FUNCTION(Optional) .............10/20 4. Adjusting the picture ..................11/20 4-1. Using the On Screen Display ...........12/20 4-2. Direct access buttons ........................12/20 4-3. OSD Adjustments .............................13/20 5. Audio system ...............................15/20 6. Display power management ......16/20 Reducing power consumption ...............16/20 7. Troubleshooting ..........................17/20 8. Specifications ..............................20/20 LM1510A 15" TFT LCD Color Monitor BACK NEXT 1. Introduction This manual contains instructions for installing and operating ImageQuest LM1510A. ImageQuest LM1510A is a highly ergonomic color display unit. • • • • • • • • • • • • • 2. Safety Information 15" viewable XGA LCD Supporting high full scan flicker-free picture quality With On Screen Display menus for user control With internal active stereo speakers 100-240V AC input voltage VESA DPMS (Display Power Management Signaling) VESA DDC1/2B compatibility High quality screen re-scaling capability Fast and accurate auto adjustment Most advanced image scaling USB (Universal Serial Bus) hub Supporting VESA Flat Panel Monitor Physical Mounting Interface Pivot Function (Optional) This Monitor has been engineered and manufactured to assure your safety. You can prevent serious electrical shock and other hazards by keeping in mind the following: Do not place anything wet on the monitor or the power cord. Never cover the ventilation openings with any material and never touch them with metallic or inflammable materials. 1/20 BACK LM1510A 15" TFT LCD Color Monitor NEXT Avoid operating the monitor in extreme heat, humidity or areas affected by dust. Temperature : 5~35°C Humidity : 30~80RH Be sure to turn the monitor off before plugging the power cord into the socket. Make sure that the power cord and the other cords are securely and rightly connected. Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and broken plugs, which may cause electric shock or fire. Call your service technician for replacement. Do not use sharp tools such as a pin or a pencil near the monitor, as they may scratch the LCD surface. Do not use a solvent, such as benzene, to clean the monitor, as it will damage the LCD surface. 2/20 LM1510A 15" TFT LCD Color Monitor BACK NEXT Cleaning and Maintenance • • • • • To avoid risk of electric shock, do not disassemble the display unit cabinet. The unit is not user-serviceable. Remember to unplug the display unit from the power outlet before cleaning. Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner or benzene, abrasive cleaners or compressed air. Do not wipe the screen with a cloth or sponge that could scratch the surface. To clean your antistatic screen, use water and a special microfiber screen cleaning tissue used in optical lens cleaning, or lightly dampen a soft, clean cloth with water or a mild detergent. To clean display unit cabinet, use a cloth lightly dampended with a mild detergent. 3/20 BACK LM1510A 15" TFT LCD Color Monitor 3. Installing the monitor NEXT The following items should be found in the packaging. 3-1. Packing List UK Japan America/Canada Europe South Africa Australia Power cord Signal cable USB cable Audio cable Korea AC/DC Power adapter Compact Disc Above power cord can be changed upon different voltage areas. Please contact your dealer if anything is missing or damaged. 4/20 LM1510A 15" TFT LCD Color Monitor 3-2. Selecting a suitable location • • • • • 3-3. Connecting the monitor 1. 2. 3. 4. 5. BACK NEXT Place the monitor at least 30cm from other electrical or heat-emitting equipment and allow at least 10cm on each side for ventilation. Place the monitor in a position where no light shines directly onto or is reflected on the screen. To reduce eye strain, avoid installing the display unit against a bright background such as a window. Position the monitor so that the top of the screen is no higher than eye level. Position the monitor directly in front of you at a comfortable reading distance (around 45 to 90cm) Before you start cabling your monitor, check that the power is off on all units. To avoid any possibility of electric shock, always connect your equipment to properly earthed outlets. Insert the other 15-pin signal cable connector into the 15-pin VGA connection on your computer and screw it down. Connect the audio cable to the display unit and the system unit. Plug the power cord connection to connection on the AC-DC Power adapter. Plug the jack of the AC-DC Power adapter connection to connection on monitor. Plug the other end of the power cord to your computer's main supply or to a 100V-240V earthed electrical outlet. Turn on the monitor using the power switch and check that the power LED is on. If not, repeat steps 1,2,3 and 4 or refer to the Troubleshooting section of this guide. 5/20 BACK LM1510A 15" TFT LCD Color Monitor 6. NEXT Turn on the power to the computer. The picture will appear within about 10 seconds. Adjust the picture to obtain optimum picture quality. See section Adjusting the picture in this guide for more information. 6/20 BACK LM1510A 15" TFT LCD Color Monitor NEXT USB hub The USB hub(Bus-powered mode hub) have 1 upstream port and 2 downstream ports. The upstream port can be connected to the root hub of host PC or other downstream port. Two(2) downstream ports allow to connect another USB device such as USB mouse, joystick, printer etc. 1) 2) The maximum supply current of downstream port is 100mA each when bus-powered mode hub. To activate the USB hub, your host system should have USB capability. USB 2 downstream ports 7/20 BACK LM1510A 15" TFT LCD Color Monitor 3-4. Setting the refresh rate Follow the instructions below to set your refresh rate in Windows 98/ME/XP/2000. 1. 2. 3. 4. 5. 6. Preset Timing Table NEXT Go to the configuration window(Start-Settings-Configuration window). Double click on the ‘Display’ icon. Click on the ‘Settings’ tab. Click on the ‘Advanced’ button. Click on ‘Adapter’ and select 60Hz from the list. Click on ‘Apply’ to accept the selected value. If the signal from the system doesn't equal to the preset timing mode, adjust the mode with reference to the user guide of videocard because the screen may not be displayed. The recommended setting is a resolution of 1024x768 and a refresh rate of 60Hz. No. Resolution Horizontal Frequency Refresh rate 31.5 KHz 31.5 KHz 37.5 KHz 37.9 KHz 46.9 KHz 48.4 KHz 56.5 KHz 60.0 KHz 70.1 Hz 59.9 Hz 75.0 Hz 60.3 Hz 75.0 Hz 60.0 Hz 70.1 Hz 75.0 Hz 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 *1024 x 768 1024 x 768 1024 x 768 * Recommended primary mode. 8/20 BACK LM1510A 15" TFT LCD Color Monitor NEXT 3-5. VESA MOUNT’G • • This display unit supports VESA FPMPMI standard for 100mmx100mm screw mounting by giving 4 screw holes inside the base stand of the unit. The base stand shall be removed before connecting to Specialty Flat Panel Monitor Mounting Device. For buying VESA Flat Panel Monitor Mounting Devices, please contact following information. * Ergotron, Inc. · Address : Ergotron Europe Kuiperbergweg 50 1101 AG Amsterdam The Netherlands · Tel : +3 1 20 696 60 65 · Fax : +3 1 20 609 04 59 · E-mail : info.eu@ergotron.com Desk Mount Wall Mount 9/20 LM1510A 15" TFT LCD Color Monitor 3-6. PIVOT FUNCTION (optional) • • • • BACK NEXT Pivot allows the users to display a full page at time in either portrait or landscape view. In multiple monitor environments(like Window 98 or Mac OS), you can have one monitor in landscape and another in portrait mode, for the best of both enviroment! Pivort software is option. So customers(or you) can purchase monitors together with pivot s/w, or do not need to purchase the pivot s/w if you do not need it. When you want to purchase the software separately, you can contact the below contact points of Portrait Display, Inc. or Hyundai regional branch offices. You can also obtain the software for counter value through the below website. * Portrait Display, Inc. · Address : 5117 Johnson Driver, Suite 100, Pleasanton, California, 94588 USA · Tel : +1 925 227 2700 ext. 222 · Fax : +1 925 227 2705 · E-mail : http://www.portrait.com 10/20 BACK LM1510A 15" TFT LCD Color Monitor NEXT 4. Adjusting the picture You can adjust the screen display by using the buttons located right side of the screen. LED indicator Soft power switch 11/20 LM1510A 15" TFT LCD Color Monitor 4-1. Using the On Screen Display 1. 2. 3. 4. 5. 6. BACK NEXT Push the MENU button to call the OSD to the screen. The resolution and frequency are displayed at the top of the menu box for your information. Push the or button to choose the item you want to adjust. The selected item is highlighted. Push the SELECT button to adjust the highlighted item. Use the or button to adjust the selection. Push the MENU button to return to the previous menu if you are in a submenu. The display unit automatically saves the new settings in 1 second after your last adjustments and the menu disappears. You can also push the MENU button to make the menu disappear. 4-2. Direct access buttons AUTO ADJUST Push the button SELECT (AUTO) to adjust the shape of screen automatically. CONTRAST Use the button to select the contrast adjustment. Adjust with or button. BRIGHTNESS Use the button to select the brightness adjustment. Adjust with or button. 12/20 BACK LM1510A 15" TFT LCD Color Monitor NEXT 4-3. OSD Adjustments The OSD adjustments available to you are listed below. You can play the movie file to see how to adjust the picture image by clicking each icon or title hereunder. BRIGHTNESS Adjust the brightness of the screen. CONTRAST Adjust the contrast of the screen. COLOR CONTROL Color temperature affects the tint of the image. With lower color temperatures the image turns reddish and with higher temperatures bluish. There are three color settings available: Mode 1(a warm white), Mode 2(a cool white) or USER. With the USER setting you can set individual values for red, green and blue. H/V POSITION H-POSITION Adjusts the horizontal position of the entire screen image. V-POSITION Adjusts the vertical position of the entire screen image. 13/20 BACK LM1510A 15" TFT LCD Color Monitor NEXT CLOCK PHASE PHASE Adjust the noise of the screen image. CLOCK Adjust the horizontal size of the entire screen image. AUTO ADJUST You can adjust the shape of screen automatically at the full screen pattern. MISCELLANEOUS RECALL Recall the saved color data. OSD TIMER You can set the displayed time of OSD Menu window on the screen by using this adjustment. OSD POSITION Adjust the OSD menu's horizontal or vertical position on the screen. LANGUAGE You can select the language in which adjustment menus are displayed. The following languages are available : English, French, German, Italian, Spanish, Swedish, Finnish, Danish, Portuguese and Dutch. 14/20 BACK LM1510A 15" TFT LCD Color Monitor NEXT 5. Audio system This monitor has an audio system including two micro loudspeakers. Each of two micro loudspeakers has an 1Wrms (max.) output power. This system also supports a headphone output jack. This system has been tuned to get a best tone quality which an audio input level is under 600mVp-p. if the input level is more than 600mVp-p, you must tune down the audio input as the audio output tone may be distorted. Audio Volume Headphone Output Audio INPUT 15/20 BACK LM1510A 15" TFT LCD Color Monitor 6. Display power management Reducing power consumption NEXT If the power management function of your computer is enabled, your monitor turns on and off automatically. You can control power management features from your computer. Your computer may have power management features which enable the computer or monitor to enter a power saving mode when the system is idle. You can reactivate the system by pressing any key or moving the mouse. Mode LED Normal Green 40 W off Orange 5W Unplugged Not illuminated 0W Power consumption The power button does not disconnect the monitor from the mains. The only way to isolate the monitor completely from the mains supply is to unplug the mains cable. The power modes listed are for the monitor only and do not include any USB devices connected to the USB ports. 16/20 BACK LM1510A 15" TFT LCD Color Monitor NEXT 7. Troubleshooting If your monitor is not functioning properly, you may be able to solve the problem by following the suggestions below : Problem Blank screen Possible solution If the power LED is not lit, push the Soft power switch or check the AC cord to turn the monitor on. If the display unit is powered through the computer, check that the computer is switched on. The display unit might be in standby mode. Push one of the keyboard keys. Check that the keyboard is properly connected to the computer. Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. If the connector is loose, tighten the connector's screws. Check that the power cable is correctly connected to the display unit and to the power outlet. Error message: Video mode not supported Check the resolution and the frequency on the video port of your computer. Compare these values with the data in the Preset Timing Table. The display does not enter power management mode The video signal from the computer does not comply with VESA DPMS standard. Either the computer or the graphics adapter is not using the VESA DPMS power management function. 17/20 BACK LM1510A 15" TFT LCD Color Monitor Problem NEXT Possible solution Color defects Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. Try another color temperature. Size, position, shape or quality unsatisfactory Adjust the picture characteristics as described in the section OSD Adjustment(4-3). Duplicated images A problem with your graphics adapter or display unit. Contact your service representative. Image is not stable Check that the display resolution and frequency from your PC or graphic adapter is an available mode for your monitor. In your PC, you can check through Control panel, Display, Settings. If the setting is not correct, use your computer utility program to change the display settings. Message : No signal Check that the signal cabel connector is properly connected and that the connection pins are not bent or damaged. If the connector is loose, tighten the connector’s screws. Check that the computer is switched on. The power LED is a orange color To enter a power saving mode. You can reactivate the system by pressing any key or moving the mouse. 18/20 BACK LM1510A 15" TFT LCD Color Monitor Problem The power LED is a orange color NEXT Possible solution LED Indicator can be orange color on changing of video mode or Input Signal(D-sub). Check the Resolution and the frequency on the video part of your computer. Compare these values with the data in the Preset Timing Table. Contacting service If the above troubleshooting hints do not help you find a solution to the problem, contact an authorized service agent. If the monitor is sent for service, use the original package if possible. Unplug the display unit from the power outlet and contact a service agent when: • • • • The monitor does not operate normally according to the operating instructions. The monitor exhibits a distinct change in performance. The monitor has been dropped or the cabinet has been damaged. The monitor has been exposed to rain, or water or liquid has been spilled onto the monitor. 19/20 BACK LM1510A 15" TFT LCD Color Monitor 8. Specifications 15"viewable, Diagonal, Pixel pitch 0.297 mm, A-Si TFT Brightness 200cd/m2(Min.), 250cd/m2(Typ.) Response Time 20msec Display area 304 X 228 mm Number of color 16.2 million colors Input signals R.G.B Analog, 15 pin D-sub Frequency rate Horizontal : 31.0 to 60.0KHz, Vertical : 56 to 75Hz Maximum bandwidth 80 MHz Maximum resolution 1024X768@75Hz Input voltage DC 12V/5V 2.0A / 2.0A Power consumption 40W Power management VESA DPMS Plug & Play VESA DDC 1/2B BRIGHTNESS, CONTRAST, COLOR CONTROL, MISCELLANEOUS, OSD menu AUTO ADJUST, LANGUAGE, H/V POSITION, CLOCK PHASE 1up X 2down (Bus-Powered Hub) USB Audio Input : 600mVp-p Max. Audio system Output Power : 2 x 1W micro loudspeaker(std.) 100 mm X 100 mm screw mounting VESA FPMPMI TCO, Ergonomics, FCC Class B, CE,cULus, TÜV-GS, SEMKO Safety and EMC 5 ~ 35O C Operating Temperature Weight 5.3Kg unpacked, 6.5Kg packed Dimensions (W X H X D mm) 387 X 388 X 201 mm 90O (Clockwise) Physical pivot LCD • Specification is subject to change without notice for performance improvement. 20/20
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2002:01:31 15:49:03 Producer : Acrobat Distiller 4.0 for Macintosh Modify Date : 2002:02:01 10:51:05+09:00 Page Count : 24 Page Mode : UseOutlinesEXIF Metadata provided by EXIF.tools