Hyundai IBT L17A0D083 17" LCD MONITOR User Manual 1

Hyundai IBT Corp. 17" LCD MONITOR 1

Contents

Users manual

FCC ID : PJIL17A0D083 ATTACHMENT E. - USER’S MANUAL - REPORT NO. : HCT-F03-1003 HYUNDAI C–TECH 1/1
NEXTType No. L17A0D083User’s GuideImageQuest L17TTFT LCD Color MonitiorClickwww.hyundaiQ.com
U.S.A.U.S.FEDERAL COMMUNICATIONS COMMISSIONRADIO FREQUENCY INTERFERENCE STATEMENTINFORMATION TO THE USERNOTE : This equipment has been tested and found to comply with the limits for aClass B digital device pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmfulinterference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, ifnot installed and used in accordance with the instructions, may cause harmfulinterference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet of a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for assistance.Changes or modification not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.Connecting of peripherals requires the use of grounded shielded signal cables.BACKNEXT
WE ImageQuest CO., LTD.Ami-ri Bubal-Eub Ichon-Si Kyungki-Do467-860 KOREAdeclare under our sole responsibility that the product:to which this declaration relates is in conformity with thefollowing standard(s) or other normative document(s)following the provisions of the Low Voltage Directive 73/23/EEC,93/68/EEC and the EMC Directive 89/336/EEC.KOREA / April. 24, 2003 HONG KI, KIM(Place and date of issue) (Name and signature of authorized person)DECLARATION OF CONFORMITY BACKNEXTKind of equipment : COLOR MONITORType-Designation : L17A0D083Safety : EN 60950 : 2000EMC : EN 55022 : 1998, EN 55024 : 1998EN 61000-3-2 : 1995+A1 : 1998+A2 : 1998EN 61000-3-3 : 1995Accredited testlaboratory:TÜV RheinlandAm Grauen Stein51105 Köln
L17T17" TFT LCD Color MonitorContents 1. Introduction ...................................1/212. Safety Information ........................1/213. Installing the monitor ...................4/213-1. Packing List .........................................4/213-2. Selecting a suitable location ..............5/213-3. Connecting the monitor .....................5/213-4. Setting the refresh rate ......................8/21Preset Timing Table ............................9/213-5. User’s Environment ...........................10/21BACKNEXT4. Adjusting the picture ..................12/214-1. Using the On Screen Display ...........13/214-2. Direct access buttons .......................13/214-3. OSD Adjustments .............................14/215. Display power management ......17/21Reducing power consumption ..............17/216. Troubleshooting ..........................18/217. Specifications ..............................21/21
L17T17" TFT LCD Color Monitor1. Introduction2. Safety Information1/21BACKNEXTThis manual contains instructions for installing and operating ImageQuest L17T.ImageQuest L17T is a highly ergonomic color display unit.• 17" viewable SXGA LCD• High quality screen re-scaling capability• 100-240V AC input voltage• VESA DPMS (Display Power Management Signaling)• VESA DDC1/2B compatibility• Advanced digital On-Screen-Display controls• Fast and accurate auto adjustment • Most advanced image scaling• Supporting VESA Flat Panel Monitor Physical Mounting InterfaceThis Monitor has been engineered and manufactured to assure your safety. You can prevent serious electrical shock and other hazards by keeping in mind the following:Do not place anything wet on the monitor or the powercord. Never cover the ventilation openings with anymaterial and never touch them with metallic or inflammable materials.
L17T17" TFT LCD Color Monitor2/21BACKNEXTAvoid operating the monitor in extreme heat, humidity or areas affected by dust. Temperature : 5~35°CHumidity : 30~80RH Be sure to turn the monitor off before plugging thepower cord into the socket. Make sure that the powercord and the other cords are securely and rightlyconnected.Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and broken plugs, which may cause electric shock or fire. Call your service technician for replacement.Do not use sharp tools such as a pin or a pencil near the monitor, as they may scratch the LCD surface.Do not use a solvent, such as benzene, to clean the monitor, as it will damage the LCD surface.
L17T17" TFT LCD Color MonitorCleaning and Maintenance • To avoid risk of electric shock, do not disassemble the display unit cabinet. Theunit is not user-serviceable. Remember to unplug the display unit from thepower outlet before cleaning.• Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do notuse thinner or benzene, abrasive cleaners or compressed air.• Do not wipe the screen with a cloth or sponge that could scratch the surface.• To clean your antistatic screen, use water and a special microfiber screencleaning tissue used in optical lens cleaning, or lightly dampen a soft, cleancloth with water or a mild detergent.• If the instructions above do not help in removing stains, contact an authorizedservice agent. 3/21BACKNEXT
L17T17" TFT LCD Color Monitor4/21BACKNEXTThe following items should be found in the packaging.Above power cord can be changed upon different voltage areas. Pleasecontact your dealer if anything is missing or damaged.Other power cord except the cord packed in the product or longer than 3mmay affect EMC of the product in operating condition.3. Installing the monitor3-1. Packing List!UKAmerica/CanadaJapanAustraliaKoreaEuropeSouth AfricaPower CordSignal CableAudio Cable Compact Disc
L17T17" TFT LCD Color Monitor5/21BACKNEXT3-2. Selecting a suitablelocation3-3. Connecting the monitor• Place the monitor at least 30cm from other electrical or heat-emittingequipment and allow at least 10cm on each side for ventilation.• Place the monitor in a position where no light shines directly onto or isreflected on the screen.• To reduce eye strain, avoid installing the display unit against a brightbackground such as a window.• Position the monitor so that the top of the screen is no higher than eye level.• Position the monitor directly in front of you at a comfortable reading distance(around 45 to 90cm) Before you start cabling your monitor, check that thepower is off on all units. To avoid any possibility ofelectric shock, always connect your equipment toproperly earthed outlets.1. Insert the other 15-pin signal cable connector into the 15-pin VGA connectionon your computer and screw it down. 2. Plug the power cord connection to connection on the monitor.3. Plug the other end of the power cord to your computer's main supply or to a100V-240V earthed electrical outlet.4. Turn on the monitor using the power switch and check that the power LED ison. If not, repeat steps 1,2,3 and 4 or refer to the Troubleshooting section ofthis guide.!!
L17T17" TFT LCD Color Monitor6/21BACKNEXT5. Turn on the power to the computer. The picture will appear within about 10seconds. Adjust the picture to obtain optimum picture quality. See sectionAdjusting the picture in this guide for more information.
Power SwitchSpeakerL17T17" TFT LCD Color Monitor• Audio system7/21BACKNEXT!!This monitor has an audio system including two micro loudspeakers. Each of twomicro loudspeakers has an 2Wrms (typ.) output power. This system also supports aheadphone output jack.This system has been tuned to get a best tone quality which an audio inputlevel is under 300mVrms. if the input level is more than 600mVp-p, you musttune down the audio input as the audio output tone may be distorted.When this monitor is turned on, audio is always set up as off mode. Please useAUDIO direct access button on the front cover or On Screen Display to putaudio on.
L17T17" TFT LCD Color Monitor8/21BACKNEXT3-4. Setting the refreshrate Follow the instructions below to set your refresh rate in Windows 98/ME/XP/2000.1. Go to the configuration window(Start-Settings-Configuration window).2. Double click on the ‘Display’ icon.3. Click on the ‘Settings’ tab.4. Click on the ‘Advanced’ button.5. Click on ‘Adapter’ and select 60Hz from the list.6. Click on ‘Apply’ to accept the selected value.Power SwitchLED Indicator
L17T17" TFT LCD Color MonitorPreset Timing Table If the signal from the system doesn't equal to the preset timing mode, adjustthe mode with reference to the user guide of videocard because the screenmay not be displayed.The recommended setting is a resolution of 1280x1024 and a refresh rate of 60Hz.9/21BACKNEXT!No.1234567891011121314Resolution720 x 400640 x 480640 x 480 800 x 600800 x 600800 x 600800 x 600832 x 6241024 x 7681024 x 7681024 x 7681152 x 8641280 x 10241280 x 1024Horizontal Frequency31.5 KHz31.5 KHz37.5 KHz35.2 KHz37.9 KHz48.1 KHz46.9 KHz49.7 KHz48.4 KHz56.5 KHz60.0 KHz67.5 KHz63.9 KHz80.0 KHzRefresh rate70 Hz60 Hz75 Hz56 Hz60 Hz72 Hz75 Hz75 Hz60 Hz70 Hz75 Hz75 Hz60 Hz75 Hz
L17T17" TFT LCD Color Monitor3-5. User’s EnvironmentKensington Security(Locking) SlotRecommended Ergonomic User’s Environment• Viewing angle of the monitor should be between 0~20 degree.• This display unit supports a Kensington-type security device to secure yourmonitor. Kensington lock is not included.• To purchase and install the Kensington locking device, please refer to thefollowing contact information.* Kensington Technology Group· Address : 2000 Alameda de las Pulgas 2F san mateo, California 94403-1289· Tel : +1 650 572 2700 · Fax : +1 650 572 9675 · Web-site : www.kensington.com10/21BACKNEXT20oKensington security slot
L17T17" TFT LCD Color MonitorVESA MOUNT’G• This display unit supports VESA FPMPMI standard for 75mmx75mm screwmounting by giving 4 screw holes inside the base stand of the unit.• For buying VESA Flat Panel Monitor Mounting Devices, please contactfollowing information.* Ergotron, Inc.· Address : Ergotron Europe Kuiperbergweg 50 1101 AG Amsterdam The Netherlands· Tel : +3 1 20 696 60 65 · Fax : +3 1 20 609 04 59· E-mail : info.eu@ergotron.com11/21BACKNEXTDesk MountWall Mount
L17T17" TFT LCD Color Monitor4. Adjusting the picture12/21BACKNEXTYou can adjust the screen display by using the buttons located below thescreen.1280X1024V:60.0/H:63.9
L17T17" TFT LCD Color Monitor13/21BACKNEXT1. Push the MENU button to call the OSD to the screen. The resolution andfrequency are displayed at the top of the menu box for your information.2. Push the or button to choose the item you want to adjust. The selecteditem is highlighted.3. Push the SELECT button to adjust the highlighted item. 4. Use the or button to adjust the selection.5. Push the MENU button to return to the previous menu if you are in a submenu.6. The display unit automatically saves the new settings in 1 second after yourlast adjustments and the menu disappears. You can also push the MENU buttonto make the menu disappear.AUTO ADJUSTAt first display a full screen such as Window's back ground.Push the button SELECT(AUTO) to adjust the shape of screenautomatically.VOLUMEUse the button to select the volume adjustment.Adjust with or button.4-1. Using the On ScreenDisplay 4-2. Direct access buttons
L17T17" TFT LCD Color Monitor14/21BACKNEXT4-3. OSD Adjustments The OSD adjustments available to you are listed below.BRIGHTNESSAdjust the brightness of the screen.CONTRASTAdjust the contrast of the screen.COLOR CONTROLColor temperature affects the tint of the image. With lower color temperatures the image turns reddish and with higher temperatures bluish.There are three color settings available: Mode 1(a cool white), Mode 2(awarm white) or USER. With the USER setting you can set individual valuesfor red, green and blue.MISCELLANEOUSRECALL Recall the saved color data.OSD TIMERYou can set the displayed time of OSD Menu window on the screen byusing this adjustment.OSD POSITIONAdjust the OSD menu's horizontal or vertical position on the screen.
L17T17" TFT LCD Color Monitor15/21BACKNEXTAUDIOVOLUMEAdjust the audio volume level.SOUND OFFThis menu is used to choose audio on or off.TREBLEEmphasize high frequency audio.BASEEmphasize low frequency audio.AUTO ADJUSTYou can adjust the shape of screen automatically at the full screenpattern.LANGUAGEYou can select the language in which adjustment menus are displayed. The following languages are available : English, French, German, Italian,Spanish, Swedish, Finnish, Danish, Portuguese and Dutch.H/V. POSITIONH POSITIONAdjusts the horizontal position of the entire screen image.V POSITIONAdjusts the vertical position of the entire screen image.
L17T17" TFT LCD Color MonitorCLOCK PHASEPHASEAdjust the noise of the screen image.CLOCKAdjust the horizontal size of the entire screen image.SOURCENo function. (Only supportable by the optional appliance.)16/21BACKNEXT
L17T17" TFT LCD Color MonitorIf the power management function of your computer is enabled, your monitorturns on and off automatically. You can control power management features fromyour computer.Your computer may have power management features which enable the computeror monitor to enter a power saving mode when the system is idle. You canreactivate the system by pressing any key or moving the mouse.The power button does not disconnect the monitor from the mains. The onlyway to isolate the monitor completely from the mains supply is to unplug themains cable.17/21BACKNEXT5. Display power managementReducing powerconsumptionPower consumption40 W3.5 W0 WModeNormaloffUnpluggedLEDGreenOrangeNot illuminated!
L17T17" TFT LCD Color Monitor6. Troubleshooting18/21BACKNEXTProblemBlank screenError message:Video mode notsupportedThe display does not enter power managementmodePossible solutionIf the power LED is not lit, push the Soft power switch or check theAC cord to turn the monitor on. If the display unit is poweredthrough the computer, check that the computer is switched on.The display unit might be in standby mode. Push one of thekeyboard keys. Check that the keyboard is properly connected tothe computer.Check that the signal cable connector is properly connected and thatthe connection pins are not bent or damaged. If the connector isloose, tighten the connector's screws.Check that the power cable is correctly connected to the display unitand to the power outlet. Check the resolution and the frequency on the video port of yourcomputer.Compare these values with the data in the Preset Timing Table.The video signal from the computer does not comply with VESADPMS standard. Either the computer or the graphics adapter is notusing the VESA DPMS power management function.If your monitor is not functioning properly, you may be able to solve the problemby following the suggestions below :
L17T17" TFT LCD Color Monitor19/21BACKNEXTPossible solutionCheck that the signal cable connector is properly connected and thatthe connection pins are not bent or damaged. Try another colortemperature. Adjust the picture characteristics as described in the section OSDAdjustment(4-3).A problem with your graphics adapter or display unit. Contact yourservice representative.Check that the display resolution and frequency from your PC orgraphic adapter is an available mode for your monitor.In your PC, you can check through Control panel, Display, Settings.If the setting is not correct, use your computer utility program tochange the display settings.Check that the signal cabel connector is properly connected and thatthe connection pins are not bent or damaged.If the connector is loose, tighten the connector’s screws.Check that the computer is switched on.To enter a power saving mode. You can reactivate the system bypressing any key or moving the mouse.ProblemColor defectsSize, position,shape or qualityunsatisfactoryDuplicatedimagesImage is notstableMessage : No signalThe power LED isa orange color
Possible solutionLED Indicator can be orange color on changing of video mode orInput Signal.Check the Resolution and the frequency on the video part of yourcomputer. Compare these values with the data in the Preset TimingTable.ProblemThe power LED isa orange colorL17T17" TFT LCD Color Monitor20/21BACKNEXTContacting service If the above troubleshooting hints do not help you find a solution to the problem,contact an authorized service agent. If the monitor is sent for service, use theoriginal package if possible.Unplug the display unit from the power outlet and contact a service agent when:• The monitor does not operate normally according to the operating instructions.• The monitor exhibits a distinct change in performance.• The monitor has been dropped or the cabinet has been damaged.• The monitor has been exposed to rain, or water or liquid has been spilled ontothe monitor.
L17T17" TFT LCD Color Monitor21/21BACK17"viewable, Diagonal, A-Si TFT0.264 x 0.264mm250cd/m216msec337.920 x 270.336 mm262 KR.G.B Analog, 15 pin D-subHorizontal : 31.0 to 80.0KHz, Vertical : 56 to 75Hz135 MHz1280 x 1024@75Hz 1280 x 1024@60Hz100-240 VAC, 1.0A40WVESA DPMSVESA DDC 1/2BBRIGHTNESS, CONTRAST, COLOR CONTROL,MISCELLANEOUS, AUDIO, AUTO ADJUST, LANGUAGE,H/V. POSITION, CLOCK-PHASE, SOURCE2ch x 2watts75 x 75 mm screw mountingTCO, FCC Class B, CE, cULus, TÜV-GS, SEMKO5 ~ 35O C4.6Kg unpacked, 6.1Kg packed372 X 395 X 185 mmLCDPixel pitchBrightnessResponse TimeDisplay areaNumber of colorInput signalsFrequency rateMaximum bandwidthMaximum resolutionRecommanded resolutionInput voltagePower consumptionPower managementPlug & PlayOSD menuBuilt in SpeakerVESA FPMPMIErgonomics,Safety and EMCOperating TemperatureWeightDimensions (W X H X D mm)• Specification is subject to change without notice for performance improvement.7. Specifications
ENGLISHModel : TN01(NTSC)User's GuideTV Tuner Card
U.S.A.U.S. FEDERAL COMMUNICATIONS COMMISSIONRADIO FREQUENCY INTERFERENCE STATEMENTINFORMATION TO THE USERNOTE : This equipment has been tested and found to comply with the limits for aClass B digital device pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmfulinterference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, ifnot installed and used in accordance with the instructions, may cause harmfulinterference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet of a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for assistance.Changes or modification not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.Connecting of peripherals requires the use of grounded shielded signal cables.
ENGLISHENGLISHENGLISHENGLISHENGLISH ENGLISHWE IQTAmi-ri Bubal-Eub Ichon-Si Kyungki-Do467-860 KOREAdeclare under our sole responsibility that the product:to which this declaration relates is in conformity with thefollowing standard(s) or other normative document(s)following the provisions of the Low Voltage Directive 73/23/EEC,93/68/EEC and the EMC Directive 89/336/EEC.KOREA /April 21, 2003 HONG KI, KIM(Place and date of issue) (Name and signature of authorized person)DECLARATION OF CONFORMITYDECLARATION OF CONFORMITYKind of equipment : TV TUNER CARDModel : TN01Safety : EN 60950 : 2000EMC : EN 55022/1998+A1:2000 Class B, EN 61000-3-2 : 2000, EN 61000-3-3 : 1995+A1:2001, EN 55013/1990+A12:1994+A13:1996+A14:1999,EN 55024:1998+A1:2001,EN 55020:1994+A11:1996+A12 A13 A14:1999Accredited testlaboratory:TÜV RheinlandAm Grauen Stein51105 Köln
Contents1. Features .......................................................1♦PC MODE .......................................................................................1♦TV & VIDEO MODE .....................................................................12. Installing the TV Tuner Card .....................2♦Packing List ...................................................................................2♦Instructions to Install the TV Tuner Card ...............................3♦Connections ..................................................................................43. Direct access buttons ................................54. OSD(On-Screen-Display) Adjustments ......65. TV Functions ...............................................96. Troubleshooting .......................................15
ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH1FEATURE1. Feature♦PC MODE• High definition screen quality• Crisp letter readability• Auto-Adjustment function• Real color images• Video card compatible♦TV & Video MODE• Composite Video input• S-Video input(Y/C)• Multi standard color decoding• High performance adaptive 4H comb filter• Y/C separator with adjustable vertical peaking• 8-bit video A/D converters & AGC (Automatic Gain Control)• Brightness / Contrast / Saturation / Tint / Sharpness control• High quality anti-aliasing filter• Y Cb Cr 4:2:2 format• ITU-R656• Remote control included• Multi-color coding• Air & Cable Selectable• Channel searching• Channel Edit• Source select (Hot key)
2INSTALLING THE TV TUNER CARD2. Installing the TV Tuner Card♦Packing ListUser’s GuideRCA CableS-video Signal Cable(Option)TV Tuner Card Remote Control withBatteries (AAA x 2)
3INSTALLING THE TV TUNER CARD♦Instructions to Install the TV Tuner CardAfter opening the Cover on the rear side of the Monitor Stand. Please insert Tuner & Video board into the hole on the stand with the tuner tothe right side. (If installed correctly, you will hear a click sound.)*Caution : Please check that the guide rails on the both sides of the board arewell attached to the stand.Do not insert any Connector or Cable into the D-Sub(15pin).!D-Sub(15 pin)
4INSTALLING THE TV TUNER CARD♦connections- Connecting External A/V Devices• Connect RCA (Yellow) or S-Video cables to an appropriate external A/Vdevice such as VCR, DVD or Camcorder.• Connect RCA audio cables to “Audio (R)” and “Audio (L)” terminals and theother ends to corresponding audio out terminals on the A/V device.- Connecting TV/CATV• Connect an antenna or CATV cable to the antenna terminal on the back ofthe monitor.RCA VIDEO Yellow-CableS-VIDEO Cable (Option)RCA(Left) AUDIO White-CableRCA(Right) AUDIO Red-Cable
5DIRECT ACCESS BUTTONS3. Direct access buttonsUse this button to change a video sourceVideo sources are changed in the following order :PC → S-VIDEO → VIDEO → TVUse this button to select the volume adjustment.Then, adjust with the Up or Down button.Open the On-Screen-Display and select the highlighted function.Select a function on the OSD.Moves the selector right or left on the OSD.Increases or decreases the values of the selected function.Increases or decreases the channel number.POWER SWITCHLED INDICATOR/ Receive window forRemote controller
OSD ADJUSTMENTS64. OSD AdjustmentsThe OSD adjustments available to you are listed below.BRIGHTNESSAdjusts the brightness of the screen.CONTRASTAdjusts the contrast of the screen.IMAGE ADJUSTSATURATIONAdjusts the color saturation of the video image.TINTAdjust the color tint of the video image.SHARPNESSAdjusts the sharpness and softness of the video image.MISCELLANEOUSRECALLRecalls the saved color data.OSD TIMERYou can set the time of the OSD Menu window will be displayed onthe screen by using this adjustment.OSD POSITIONAdjusts the OSD menu's horizontal or vertical position on the screen.AUDIOVOLUMEAdjusts the audio volume level.SOUND OFFThis menu is used to turn the choose audio on or off.TREBLEEmphasizes high frequency audio.BASEEmphasizes low frequency audio.
OSD ADJUSTMENTS7LANGUAGEYou can select the language in which adjustment menus are displayed.The following languages are available : English, French, German,Italian, Spanish, Swedish, Finnish, Danish, Portuguese and Dutch.TVCH SEARCHINGBy selecting a country on the screen, this program enables the userto seach for the channels automatically.If cable(Air/CATV) is disconnected, or an inappropriate country isselected, it may operate improperly.CH EDITTo add a newly found channel or remove an existing channel.CH FINE TUNETo make the video image as clear as posible.TV INPUTSelect a channel system : Air or Cable.SOURCEThis menu is used to choose the desired input signal source.There are four signal sources available :- Analog RGB : 15 pin D-sub, Analog signal- S-video : MINI DIN, Separate video signal- Composite Video : RCA Jack, Composite video signal- TV : Antenna or CATV signalCLOSED CAPTIONYou may either press the AUTO/CC button on your remote or choose theCLOSED CAPTION from your on screen menu. These captions are usuallysubtitles for the hearing impaired, or foreign-language translations.FUNCTIONYou can turn ON and OFF for Closed Captioning.MODEYou can choose the CC/TEXT mode, depending on the broadcast.DISPLAYYou can choose the form of the caption on the BOX or SHADOW.!
OSD ADJUSTMENTSV-CHIPThe V-CHIP feature allows parents to control what types of programstheir children can watch. You can block the audio, video and captionsdepending on the rating system being used. First the user must enter aPASSWORD before any of the V-Chip restrictions can be set up orchanged.ENTER PASSWORDPlease enter your Password with your remote-control. V-CHIP LOCKYou can enable/disable the V-chip.TV-GUIDELINESYou can choose the TV parental guidelines ratings. MPAA RATINGYou can choose the rating system from the movies.CHANGE PASSWORDYou can change PASSWORD8
9TV FUNCTIONS5. TV Functions PR/CHAUTO/CCAUTO/CCPR/CHPRE.PR/CHPRE.PR/CHSelects video(Select input signals :PC, S-Video, Video, TVare sequentially chosen.)Previous channelChannel upTurn off the OSD/ MENUVolume upChannel searchChannel downTurn on the OSDVolume downSound on/offDisplay current stateNumeric keypads(Channel access inTV mode)Power on / offAuto adjustment(IN PC mode)/ Closed Caption(In S-Video, Videoand TV mode
In order to watch TV, Multimedia Kit shall be installed to your monitor. The following instructions are based on using remote controller, with a MENU(↵↵)buttonin remote controller the same function as the SELECT button of the monitor.TV INPUTFirst of all, you can select the Air or Cable before setup the Channel Searching. 1. Press the MENU(↵↵)button and select TV icon. 2. Move cursor to TV INPUT using the +/- buttons.3. Press the MENU(↵↵)to Select TV INPUT, then select AIR or CABLE by using the +/-buttons.4. Press the EXIT button to go back to the previous menu.CHANNEL SEARCHINGYou can scan for the frequency ranges available in your country.1. Press the MENU(↵↵)button and select TV icon.2. Select CH SEARCHING and you can see country list. 3. Choose your country by +/- key, then press MENU(↵↵)button to go to CHSEARCHING. If your country is not listed, contact the distributors or servicerepresentatives. CHANNEL EDIT 1. Select CH EDIT by +/- buttons, then press MENU(↵↵)button. You can save or deleteabove changes by selecting DEL or ADD button by pressing MENU(↵↵)button. 2. If you choose CH FINE TUNE and press MENU(↵↵), you can see at thenumber. 10TV FUNCTIONS
3. You can tune the TV screen by +/- buttons, then press EXIT.CHANNEL FINE TUNE1. Select CH FINE TUNE by +/- buttons, then press MENU(↵↵)button. You can adjustCH FINE TUNE value by +/- buttons.2. Press the EXIT button to go back to the previous menu.CLOSED CAPTION These captions are usually subtitles for the hearing impaired, or foreign-languagetranslation.1. Press the MENU button and select CLOSED CAPTIONicon.2. Press the MENU(↵↵)to Select FUNCTION, then select ON or OFF by using the +/- buttons.3. Press the EXIT button to go back to the previous menu.4. If you choose MODE, then select mode by +/- buttons. Change the Closed Caption Mode.*The Captioning mode will depend on the particular broadcast.5. Press the EXIT button to go back to the previous menu.6. If you choose DISPLAY, then select mode by +/- buttons.Text will be in a Black Background BOX or SHADOW with no background box.7. Press the EXIT button to go back to the previous menu.11TV FUNCTIONS
V CHIP First the user must enter a Password before any of the V-CHIP restrictions can be setup or changed. 1. Press the MENU(↵↵)button and select V CHIP icon.2. Enter your 4-digit Password. (Default Password is 0, 0, 0, 0) 3. If your Password is Incorrect, please re-enter your password.4. V-Chip Menu will be appeared, after successful entering password.How to enable and disable the V-CHIP featurePress the MENU(↵↵)to Select V CHIP LOCK, then select NO(disable)or YES(enable)by using the +/- buttons. How to setup TV GUIDELINES for V-CHIP1. Press the MENU(↵↵)to Select TV-GUIDELINES. 2. For example, If you want to change theTV-14 category to block it, move the cursor to TV-14 using the +/- buttons.3. Press the MENU(↵↵)to Select TV-14. You can now see the at TV-14.4. If you want to all block all TV-14, Press +/- buttons to Select 5. If you want to block each(ex:V), move cursor to Vusing the MENU(↵↵).*remote control buttons operate as - Move : MENU(↵↵)button, Select : +/- buttons6. Press the EXIT button to go back to the previous menu. NOTE : The V-Chip will automatically block any categoly that is more “restrictive” Forexample, if you block the “TV-14” categoly, then “TV-14” and “TV-MA” willautomatically be blocked also.12TV FUNCTIONS
How to setup the MPAA RATING 1. Press the MENU(↵↵)to Select MPAARATING. 2. If you want to change PG-13 to block theseratings, first move cursor to PG-13 by using the +/- buttons.3. Press the MENU(↵↵)to Select PG-13, then select by using the +/- buttons.4. Press the EXIT button to go back to the previous menu. How to change PASSWORD 1. Press the MENU(↵↵)to Select CHANGE PASSWORD. 2. Enter your new password.Chose any 4-digits for your new password.3. CONFIRM PASSWORD Menu will be appeared, thenRe-enter the same 4-digits.*If your password is Incorrect, please re-enter yourpassword. When the conform screen disapear. Your password hasbeen memorized.4. Press the EXIT button to go back to the previous menu.13TV FUNCTIONSG : GENERAL AUDIENCES, PG : PARENTAL GUIDANCE, PG-13 : CHILDREN UNDER 13,R: RESTRICTED, NC-17 : NO ONE UNDER 17, X : ADULTS ONLY, NR : NOT RATEDTV-Y : YOUNG CHILDRENTV-Y7 : CHILDREN 7 AND OVERTV-G : GENERAL AUDIENCETV-PG : PARENTAL GUIDANCETV-14 : VIEWERS 14 AND OVERTV-MA : MATURE AUDIENCEFV : FANTASY VIOLENCEV: VIOLENCES: SEXUAL SITUATIONL: ADULT LANGUAGED: SEXUAL SUGGESTIVEDIALOG
14TV FUNCTIONSHow to reset the TV after the V-Chip blocks a channel(Emergency Escape)When the TV is tuned to a restricted channel, the V-Chip will obstruct it. The screen will go blank and the following message will show : “Excessive rating”.Please tune to a different channel with the numbers to resume normal viewing.When it is under certain conditions (depending on the rating of the broadcastedprogram) the V-Chip might lock out all the channels.In this case, use the MENU(↵↵)button for an “emergency escape” : Choose the V CHIPon the Menu. Enter your Password, Press the MENU(↵↵)to Select V CHIP LOCK, thenselect NO(disable)or YES(enable)by using the +/- buttons.If you forget the password, you can reset the password(0,0,0,0) by following sequence,in the S-Video mode or Video(Not TV mode).DISPLAY →MUTE →MUTE →1 →1 →9This message should be printed on a separate page of paper or on a page of themanual that can be removed by a parent and put in a safe place where the childrencannot find this message! !
TROUBLESHOOTING15ProblemNo sourcechangeColor defectsNo channelsearchingBlue screen/No signalThe remotecontrol does notwork.Possible solutionIf the board is not well connected to the monitor. It will notoperate properly.Please check the board is firstly installed into the monitor.(Page 3)If the screen color is not suitable for viewing.You can select “Recall” button in the OSD menu.This function returns to the initial factor setting values.(Page 6)If it could not find channels please check it againaccording to the following steps.• The cable connection must be secure.• TV input (Air/CATV)• Country selection must be correct.You should select the appropriate country to your location.(Page 7)If the screen shows only blue color or No signal message,Please check whether you have selected the right signalsource.-Analog RGB, S-video, Composite-video, TV (page 7)If the remote control does not operate well.Please check the batteries.• Batteries are correctly inserted according to and marking.• Batteries must be replaced if dead.6. TroubleshootingIf this product is not functioning properly, you may be able to solve theproblem by following simple the suggestions below ;

Navigation menu