Hyundai IBT L17C00000 17" LCD Monitor User Manual ATT E MANUAL

Hyundai IBT Corp. 17" LCD Monitor ATT E MANUAL

Users Manual

Download: Hyundai IBT L17C00000 17" LCD Monitor User Manual ATT E MANUAL
Mirror Download [FCC.gov]Hyundai IBT L17C00000 17" LCD Monitor User Manual ATT E MANUAL
Document ID572111
Application IDJ5BgtTQBv1nGBwMT+zjRnA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize58.3kB (728790 bits)
Date Submitted2005-08-16 00:00:00
Date Available2005-08-16 00:00:00
Creation Date2005-08-10 13:39:03
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2005-08-10 13:49:13
Document TitleMicrosoft Word - ATT.E_MANUAL_.doc
Document CreatorPScript5.dll Version 5.2
Document Author: Owner

FCC ID : PJIL17C00000
ATTACHMENT E.
- USER’S MANUAL -
REPORT NO. : HCT-F05-0802
HYUNDAI C–TECH
1/1
NEXT
Type No. L17C00000
Model. L73D
Dual Function Monitor
User’s Guide
TM
BACK
U.S.A.
U.S.FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
INFORMATION TO THE USER
NOTE : This equipment has been tested and found to comply with the limits for a
Class B digital device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet of a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for assistance.
Changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Connecting of peripherals requires the use of grounded shielded signal cables.
NEXT
BACK
DECLARATION OF CONFORMITY
WE
Hyundai ImageQuest CO., LTD.
Ami-ri Bubal-Eub Ichon-Si Kyungki-Do
467-860 KOREA
declare under our sole responsibility that the product:
Kind of equipment
LCD MONITOR
Type-Designation
L17C00000
to which this declaration relates is in conformity with the
following standard(s) or other normative document(s)
Safety : EN60950-1:2002
EMC : EN 55022/1998+A1:2000+A2:2003
EN 55024 :1998+A1:2001+A2:2003
EN 61000-3-2:2000
EN 61000-3-3:1995+A1:2001
following the provisions of the Low Voltage Directive 73/23/EEC,
93/68/EEC and the EMC Directive 89/336/EEC.
Accredited testlaboratory:
TÜV Rheinland
Am Grauen Stein
51105 Köln
KOREA / May 16, 2005
(Place and date of issue)
HONG KI, KIM
(Name and signature of
authorized person)
NEXT
L73D
17" Dual Function Monitor
Contents
BACK
NEXT
1. Introduction ...................................1/22
2. Safety Information ........................1/22
3. Installing the monitor ...................4/22
3-1. Packing List .........................................4/22
3-2. Selecting a suitable location ..............5/22
3-3. Connecting the monitor .....................5/22
3-4. Setting the refresh rate ......................8/22
Preset Timing Table ............................9/22
3-5. User’s Environment ...........................10/22
4. Adjusting the picture ..................12/22
4-1. Using the On Screen Display ...........14/22
4-2. Direct access buttons .......................14/22
4-3. OSD Adjustments .............................15/22
5. Display power management ......18/22
Reducing power consumption ..............18/22
6. Troubleshooting ..........................19/22
7. Specifications ..............................22/22
L73D
17" Dual Function Monitor
BACK
NEXT
1. Introduction
This manual contains instructions for installing and operating
Hyundai ImageQuest L73D.
Hyundai ImageQuest L73D is a highly ergonomic color display unit.
•
•
•
•
•
•
•
•
•
•
17" viewable SXGA LCD
High quality screen re-scaling capability
100-240V AC input voltage
VESA DPMS (Display Power Management Signaling)
VESA DDC1/2B compatibility
Advanced digital On-Screen-Display controls
Digital Signal Input by DVI-1.0 Compatability
Fast and accurate auto adjustment
Most advanced image scaling
Supporting VESA Flat Panel Monitor Physical Mounting Interface
2. Safety Information
This Monitor has been engineered and manufactured to assure your safety.
You can prevent serious electrical shock and other hazards by keeping in mind
the following:
Do not place anything wet on the monitor or the power
cord. Never cover the ventilation openings with any
material and never touch them with metallic or
inflammable materials.
1/22
BACK
L73D
17" Dual Function Monitor
NEXT
Avoid operating the monitor in extreme heat,
humidity or areas affected by dust.
Temperature : 5~35°C
Humidity : 30~80RH
Be sure to turn the monitor off before plugging the
power cord into the socket. Make sure that the power
cord and the other cords are securely and rightly
connected.
Overloaded AC outlets and extension cords are
dangerous, as are frayed power cords and broken
plugs, which may cause electric shock or fire. Call
your service technician for replacement.
Do not use sharp tools such as a pin or a pencil near
the monitor, as they may scratch the LCD surface.
Do not use a solvent, such as benzene, to clean the
monitor, as it will damage the LCD surface.
2/22
L73D
17" Dual Function Monitor
BACK
NEXT
Cleaning and Maintenance
•
•
•
•
•
To avoid risk of electric shock, do not disassemble the display unit cabinet. The
unit is not user-serviceable. Remember to unplug the display unit from the
power outlet before cleaning.
Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not
use thinner or benzene, abrasive cleaners or compressed air.
Do not wipe the screen with a cloth or sponge that could scratch the surface.
To clean your antistatic screen, use water and a special microfiber screen
cleaning tissue used in optical lens cleaning, or lightly dampen a soft, clean
cloth with water or a mild detergent.
If the instructions above do not help in removing stains, contact an authorized
service agent.
3/22
BACK
L73D
17" Dual Function Monitor
3. Installing the
monitor
NEXT
The following items should be found in the packaging.
3-1. Packing List
Power Cord
UK
Japan
America/Canada
Europe
South Africa
Australia
Signal Cable
DVI-D Cable
USB Cable
Compact Disc
Cable Holder
Audio Cable
Korea
Above power cord can be changed upon different voltage areas. Please
contact your dealer if anything is missing or damaged.
Other power cord except the cord packed in the product or longer than 3m
may affect EMC of the product in operating condition.
4/24
L73D
17" Dual Function Monitor
3-2. Selecting a suitable
location
•
•
•
•
•
3-3. Connecting the
monitor
• 15 pin D-sub / DVI-D
1.
2.
3.
4.
BACK
NEXT
Place the monitor at least 30cm from other electrical or heat-emitting
equipment and allow at least 10cm on each side for ventilation.
Place the monitor in a position where no light shines directly onto or is
reflected on the screen.
To reduce eye strain, avoid installing the display unit against a bright
background such as a window.
Position the monitor so that the top of the screen is no higher than eye level.
Position the monitor directly in front of you at a comfortable reading distance
(around 45 to 90cm)
Before you start cabling your monitor, check that the
power is off on all units. To avoid any possibility of
electric shock, always connect your equipment to
properly earthed outlets.
Insert the other 15-pin/DVI-D signal cable connector into the 15-pin VGA/DVI-D
connection on your computer and screw it down.
Plug the power cord connection to connection on the monitor.
Plug the other end of the power cord to your computer's main supply or to a
100V-240V earthed electrical outlet.
Turn on the monitor using the power switch and check that the power LED is
on. If not, repeat steps 1,2,3 and 4 or refer to the Troubleshooting section of
this guide.
5/22
L73D
17" Dual Function Monitor
BA
NE
5.
Turn on the power to the computer. The picture will appear within about 10
seconds. Adjust the picture to obtain optimum picture quality. See section
Adjusting the picture in this guide for more information.
15 pin D-sub cable (Analog RGB)
DVI-D cable (Digital TMDS)
L73D
17" Dual Function Monitor
BA
NE
• USB hub / PC Audio
The USB hub(Bus-powerd mode hub) have 1 upstream port and 2 downstream
ports. The upstream port can be connected to the root hub of host PC or other
downstream port. Two(2) downstream ports allow to connect another USB device
such as USB mouse, joystick, printer etc.
1) The maximum supply current of downstream port is 500mA when buspowered mode hub.
2) To activate the USB hub, your host system should have USB capability.
USB 2 downstream ports
L73D
17" Dual Function Monitor
3-4. Setting the refresh
rate
BACK
NEXT
Follow the instructions below to set your refresh rate in Windows 98/ME/XP/2000.
1.
2.
3.
4.
5.
6.
Go to the configuration window(Start-Settings-Configuration window).
Double click on the ‘Display’ icon.
Click on the ‘Settings’ tab.
Click on the ‘Advanced’ button.
Click on ‘Adapter’ and select 60Hz from the list.
Click on ‘Apply’ to accept the selected value.
8/22
L73D
17" Dual Function Monitor
BACK
NEXT
Preset Timing Table
If the signal from the system doesn't equal to the preset timing mode, adjust
the mode with reference to the user guide of videocard because the screen
may not be displayed.
DIGITAL R.G.B INPUT
No.
Resolution
Horizontal Frequency
Refresh rate
640 x 480
800 x 600
1024 x 768
1280 x 1024
31.5 KHz
37.9 KHz
48.4 KHz
63.9 KHz
60 Hz
60 Hz
60 Hz
60 Hz
The recommended setting is a resolution of 1280x1024 and a refresh rate of 60Hz.
ANALOG R.G.B INPUT
No.
Resolution
Horizontal Frequency
Refresh rate
10
11
12
13
14
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
31.5 KHz
31.5 KHz
37.5 KHz
35.2 KHz
37.9 KHz
48.1 KHz
46.9 KHz
49.7 KHz
48.4 KHz
56.5 KHz
60.0 KHz
67.5 KHz
63.9 KHz
80.0 KHz
70 Hz
60 Hz
75 Hz
56 Hz
60 Hz
72 Hz
75 Hz
75 Hz
60 Hz
70 Hz
75 Hz
75 Hz
60 Hz
75 Hz
9/22
BACK
L73D
17" Dual Function Monitor
NEXT
3-5. User’s Environment
Recommended Ergonomic User’s Environment
•
Viewing angle of the monitor should be between -3~20 degree.
-3o 20 o
Kensington security slot
Kensington Security
(Locking) Slot
•
•
This display unit supports a Kensington-type security device to secure your
monitor. Kensington lock is not included.
To purchase and install the Kensington locking device, please refer to the
following contact information.
* Kensington Technology Group
· Address : 2000 Alameda de las Pulgas 2F san mateo, California 94403-1289
· Tel : +1 650 572 2700 · Fax : +1 650 572 9675 · Web-site : www.kensington.com
10/22
L73D
17" Dual Function Monitor
BACK
NEXT
VESA MOUNT’G
•
•
This display unit supports VESA FPMPMI standard for 75mmx75mm screw
mounting by giving 4 screw holes inside the base stand of the unit.
For buying VESA Flat Panel Monitor Mounting Devices, please contact
following information.
* Ergotron, Inc.
· Address : Ergotron Europe Kuiperbergweg 50 1101 AG Amsterdam The Netherlands
· Tel : +3 1 20 696 60 65 · Fax : +3 1 20 609 04 59 · E-mail : info.eu@ergotron.com
Desk Mount
Wall Mount
11/22
L73D
17" Dual Function Monitor
BACK
NEXT
4. Adjusting the picture
You can adjust the screen display by using the buttons located below the
screen.
In case of applying Analog RGB Input
1280x1024
H:63.9
V:60.0
BRIGHTNESS
12/22
L73D
17" Dual Function Monitor
BACK
NEXT
In case of applying Digital TMDS Input
1280x1024
H:63.9
V:60.0
BRIGHTNESS
13/22
L73D
17" Dual Function Monitor
4-1. Using the On Screen
Display
1.
2.
3.
4.
5.
6.
BACK
NEXT
Push the MENU button to call the OSD to the screen. The resolution and
frequency are displayed at the top of the menu box for your information.
Push the
or
button to choose the item you want to adjust. The selected
item is highlighted.
Push the SELECT button to adjust the highlighted item.
Use the
or
button to adjust the selection.
Push the MENU button to return to the previous menu if you are in a submenu.
The display unit automatically saves the new settings in 1 second after your
last adjustments and the menu disappears. You can also push the MENU button
to make the menu disappear.
4-2. Direct access buttons
AUTO ADJUST
At first display a full screen such as Window's back ground.
Push the button SELECT(AUTO) to adjust the shape of screen
automatically.
VOLUME
Use the button to select the volume adjustment.
Adjust with or button.
AUDIO
Push the button
to choose audio on or off.
14/22
BACK
L73D
17" Dual Function Monitor
NEXT
4-3. OSD Adjustments
The OSD adjustments available to you are listed below.
BRIGHTNESS
Adjust the brightness of the screen.
CONTRAST
Adjust the contrast of the screen.
COLOR CONTROL
Color temperature affects the tint of the image. With lower color
temperatures the image turns reddish and with higher temperatures
bluish.
There are three color settings available BLUISH, REDDISH or USER.
With the USER setting you can set individual values for red, green
and blue.
POSITION
H POSITION
Adjusts the horizontal position of the entire screen image.
V POSITION
Adjusts the vertical position of the entire screen image.
15/22
BACK
L73D
17" Dual Function Monitor
NEXT
CLOCK PHASE
PHASE
Adjust the noise of the screen image.
CLOCK
Adjust the horizontal size of the entire screen image.
MISCELLANEOUS
RECALL
Recall the saved color data.
OSD TIMER
You can set the displayed time of OSD Menu window on the screen by
using this adjustment.
OSD POSITION
Adjust the OSD menu's horizontal or vertical position on the screen.
AUTO COLOR
Optimum color setting is auto programmed for user’s convenience.
LANGUAGE
You can select the language in which adjustment menus are displayed.
The following languages are available : English, French, German, Italian,
Spanish, Swedish, Finnish, Danish, Portuguese, Dutch (Option Korean,
Japanese, chinese, Russian)
16/22
Q17 +
17" Dual Function Monitor
BACK
NEXT
AUDIO
VOLUME
Adjust the audio volume level.
AUDIO
This menu is used to choose audio on or off.
AUTO ADJUST
You can adjust the shape of screen automatically at the full screen
pattern.
INPUT SELECT
This menu used to choose the desired input signal source.
There are two available signal source.
• Analog R.G.B : 15 pin D-sub, Analog Signal
• Digital TMDS : 24 pin DVI-D, Digital Signal
In case of applying Digital TMDS Input, the functions of Color Control, Auto
Adjust, Position, Clock Phase, Auto Color are not supported.
17/22
L73D
17" Dual Function Monitor
5. Display power
management
Reducing power
consumption
BACK
NEXT
If the power management function of your computer is enabled, your monitor
turns on and off automatically. You can control power management features from
your computer.
Your computer may have power management features which enable the computer
or monitor to enter a power saving mode when the system is idle. You can
reactivate the system by pressing any key or moving the mouse.
Mode
LED
Normal
Blue
45 W(Max)
off
Orange
1 W(Typ, 230V AC)
Unplugged
Not illuminated
Power consumption
0W
The power button does not disconnect the monitor from the mains. The only
way to isolate the monitor completely from the mains supply is to unplug the
mains cable.
18/22
BACK
L73D
17" Dual Function Monitor
NEXT
6. Troubleshooting
If your monitor is not functioning properly, you may be able to solve the problem
by following the suggestions below :
Problem
Blank screen
Possible solution
If the power LED is not lit, push the Soft power switch or check the
AC cord to turn the monitor on. If the display unit is powered
through the computer, check that the computer is switched on.
The display unit might be in standby mode. Push one of the
keyboard keys. Check that the keyboard is properly connected to
the computer.
Check that the signal cable connector is properly connected and that
the connection pins are not bent or damaged. If the connector is
loose, tighten the connector's screws.
Check that the power cable is correctly connected to the display unit
and to the power outlet.
Error message:
Video mode not
supported
Check the resolution and the frequency on the video port of your
computer.
Compare these values with the data in the Preset Timing Table.
The display does
not enter power
management
mode
The video signal from the computer does not comply with VESA
DPMS standard. Either the computer or the graphics adapter is not
using the VESA DPMS power management function.
19/22
BACK
L73D
17" Dual Function Monitor
Problem
NEXT
Possible solution
Color defects
Check that the signal cable connector is properly connected and that
the connection pins are not bent or damaged. Try another color
temperature.
Size, position,
shape or quality
unsatisfactory
Adjust the picture characteristics as described in the section OSD
Adjustment(4-3).
Duplicated
images
A problem with your graphics adapter or display unit. Contact your
service representative.
Image is not
stable
Check that the display resolution and frequency from your PC or
graphic adapter is an available mode for your monitor.
In your PC, you can check through Control panel, Display, Settings.
If the setting is not correct, use your computer utility program to
change the display settings.
Message :
No signal
Check that the signal cabel connector is properly connected and that
the connection pins are not bent or damaged.
If the connector is loose, tighten the connector’s screws.
Check that the computer is switched on.
The power LED is
a orange color
To enter a power saving mode. You can reactivate the system by
pressing any key or moving the mouse.
20/22
BACK
L73D
17" Dual Function Monitor
Problem
The power LED is
a orange color
NEXT
Possible solution
LED Indicator can be orange color on changing of video mode or
Input Signal.
Check the Resolution and the frequency on the video part of your
computer. Compare these values with the data in the Preset Timing
Table.
Contacting service
If the above troubleshooting hints do not help you find a solution to the problem,
contact an authorized service agent. If the monitor is sent for service, use the
original package if possible.
Unplug the display unit from the power outlet and contact a service agent when:
•
•
•
•
The monitor does not operate normally according to the operating instructions.
The monitor exhibits a distinct change in performance.
The monitor has been dropped or the cabinet has been damaged.
The monitor has been exposed to rain, or water or liquid has been spilled onto
the monitor.
21/22
L73D
17" Dual Function Monitor
7. Specifications
LCD
Pixel pitch
Display area
Number of color
Input signals
Frequency rate
Maximum bandwidth
Maximum resolution
Recommanded resolution
Input voltage
Power consumption
Power management
Plug & Play
OSD menu
Built in Speaker
VESA FPMPMI
Ergonomics,
Safety and EMC
Operating Temperature
Weight
Dimensions (W X H X D mm)
BACK
17"viewable, Diagonal, A-Si TFT
0.264 x 0.264 mm
337.92 x 270.33 mm
16,2 million colors
R.G.B Analog, Digital TMDS(DVI-D)
Horizontal : 31.0 to 80.0KHz, Vertical : 56 to 75Hz
135 MHz
R.G.B Analog : 1280 x 1024@75Hz
Digital TMDS : 1280 x 1024@60Hz
1280 x 1024@60Hz
100-240V AC, 1.0A
45W(Max)
VESA DPMS
VESA DDC 1/2B
BRIGHTNESS, CONTRAST, COLOR CONTROL, POSITION,
CLOCK-PHASE, MISCELLANEOUS, LANGUAGE, AUDIO,
AUTO ADJUST, INPUT SELECT
2ch x 2watts/Ear phone Jack
75 x 75 mm screw mounting
TCO
FCC Class B, CE, cTÜVus, TÜV-GS
5 ~ 35O C
4.4Kg unpacked, 6.2Kg packed
373X 420 X 200mm
• Specification is subject to change without notice for performance improvement.
• Hyundai ImageQuest’s specification on “dead pixel” of LCD Panel applies to ISO 13406-2 Standard.
22/22

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2005:08:10 13:49:13+09:00
Create Date                     : 2005:08:10 13:39:03+09:00
Metadata Date                   : 2005:08:10 13:49:13+09:00
Format                          : application/pdf
Title                           : Microsoft Word - ATT.E_MANUAL_.doc
Creator                         : Owner
Document ID                     : uuid:920dc52b-df95-4c59-8f3b-9f599a195844
Instance ID                     : uuid:b060480b-427a-4e12-b70e-78e20a58fb28
Page Count                      : 27
Author                          : Owner
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PJIL17C00000

Navigation menu