Hyundai IBT LT32AW000 32" LCD Monitor User Manual 1

Hyundai IBT Corp. 32" LCD Monitor 1

Contents

Users Manual 2 of 3

FCC ID : PJILT32AW000 REPORT NO. : HCT-F04-0601 HYUNDAI C–TECH ATTACHMENT E -2. - USER’S MANUAL -
Connecting Indoor/Outdoor TV Antenna (UHF/VHF) .................... 23Connecting to the antenna input connectionon the external equipment ......................................................... 24Before connecting the video connections to external devices ... 25Connecting VCR, Cable/Satellite Receiver .................................. 26Connecting a DTV Receiver or DVD player ................................. 27Playing Back a Tape Recorded on a Camcorder ......................... 28Connecting to a PC ..................................................................... 29Resolution Supported in PC ........................................................ 30ConnectionsHYUNDAI WIDE LCD TV
23CONNECTIONSConnecting Indoor/Outdoor TV Antenna(UHF/VHF) Connection Method Ensure to connect an antenna cable to the antenna input connection.How to WatchTurn on your LCD TV and press or on remote control unit to select TV.You can select TV AV1 VIDEO AV2 VIDEO AV3 VIDEO AV3 S-VHS DTV PC in order.Press or Numeric keys to select the desired channels.12• When inserting a 75-ohm coaxial cable into the input connection, ensure the wire tip not to bend.• If you experience poor signal reception, we recommend you purchase a signal amplifier for better picturequality.INPUToutdoor antenna indoor antenna Antenna cableAntenna cableCoaxial cableCoaxial cablePower Cable
HYUNDAI LCD TV HQL260WR/320WR)=,17;>1,-7>1,-7:4)6<7=<)6<1624CONNECTIONSConnecting to the Antenna Input Connection on the External EquipmentConnection Method Connect an antenna cable to VCR/Cable/Satellite Receiver with the antenna input.Use a coaxial cable to connect VCR/Cable/Satellite Receiver's antenna output to the antenna input on yourLCD TV.12Coaxial cableVCR/Cable Receiver
CONNECTIONS25Before connecting the video connections to external devices .....Please make sure to read the following information on connection to enjoy best picture quality.Video/Audio connectorsTypes of video/audio cable :➀ 15-Pin D-Sub ➁ COMPONENT ➂ S-VIDEO ➃ COMPOSITE Best picture quality is displayed in the following order.COMPONENT15 Pin-D-Sub >>>S-VIDEO COMPOSITEThe superior picture quality starts from the far left side.
HYUNDAI LCD TV HQL260WR/320WRCONNECTIONS26Connecting a VCR, Cable/Satellite Receiver Connection Method Connect Video/S-Video cable between Video/S-Video output terminal of VCR or Cable/Satellite receiver andVideo/S-Video input terminal of LCD TV.(Connect cables and terminal in the same colors) Connect Audio cable (left:white color, right:red color) between Audio output terminal of VCR or cable/satellitereceiver and Audio input terminal of LCD TV.(Connect cables and terminal in the same colors) How to WatchTurn on your LCD TV and press on remote control unit to select Video or S-Video.You can select AV3 S-VHS AV3 VIDEO AV2 VIDEO AV1 VIDEO TV in order.VCR play : Turn on the VCR and insert a tape and play it. Cable/Satellite receiver : Turn on the receiver and select a channel. Read a user manual of VCR, Cable/Satellite Receiver for more details.1212Use S-video cables for better picture quality. )=,17>1,-7;>1,-7:4)6<16)6<7=<ORAudio CableVIDEO Cable or S-VIDEO CableVCR/Cable ReceiverVIDEO
27CONNECTIONSConnecting a DTV Receiver or DVD Player Connection Method Connect video cables(Y, Pb, Pr) between output terminals(Y, Pb, Pr) of DTV receiver or DVD player and theinput terminals(Y, Pb, Pr) of DTV/DVD(480i/480p/720p/1080i) on the rear of LCD TV.(Connect cables and terminal in the same colors) Connect Audio cable between Audio output terminal of DTV receiver or DVD player and Audio input terminalfor DTV/DVD Audio on the rear of LCD TV.(Connect cables and terminal in the same colors) How to WatchTurn on your LCD TV and press on remote control unit to select DTV or DVD.Turn on a DTV receiver or DVD player and use it. Read the user manual of DTV receiver or DVD player for more details.1- Output terminal mark(Y, Pb, and Pr) of DVD player may be written as Y, B-Y, R-Y/Y-Cb-Cr / Y-Pb-Pr. (It dependson DVD player) - To watch digital broadcast, you have to separately purchase a digital set-top box and connect it to LCD TV. 2DTV12)=,17>1,-7 ;>1,-7+75876-6<>1,-7DTV receiver/DVD PlayerAudio CableVIDEO(Y, Pb, Pr) Cable
HYUNDAI LCD TV HQL260WR/320WRCONNECTIONS28Playing Back a Tape Recorded On a CamcorderConnection Method Connect Video cable between Video output terminal of Camcoder/Game player and Video input terminal ofLCD TV.(Connect cables and terminal in the same colors) Connect Audio cable (left:white color, right:red color) between Audio output terminal of Camcoder/Gameplayer and Audio input terminal of LCD TV. (Connect cables and terminal in the same colors) How to WatchTurn on your LCD TV and press on remote control unit to select Video.You can select AV3 S-VHS AV3 VIDEO AV2 VIDEO AV1 VIDEO TV in order.Turn on a Game player or Camcorder and use it. Read the user manual of Game player or Camcorder for more details.1212VIDEO)=,17>1,-7:4Game PlayerCamcorderAudio CableVIDEO CableOR
CONNECTIONS29Connecting to a PC Connection Method Connect PC signal cable(15 pins D-SUB) between output terminal of PC and the D-SUB input terminal ofa LCD TV. Connect Audio cable between Audio output terminal of PC and Audio input terminal for PC of LCD TV.(Connect cables and terminal in the same colors) When Using as a PC MonitorTurn on your LCD TV and press on remote control unit to select PC.Turn on the PC and use it. (Refer to next page on the back for the supported resolutions for PC)- This product supports plug-and-play function. - We recommend the above method if the satellite receiver supports DTV signal with D-SUB(15 pin) cable for thebetter quality picture. - The audio port of the PC and the DTV/DVD uses with commonness.1212PCAudio CableD-SUB Cable(15pin)
HYUNDAI LCD TV HQL260WR/320WRCONNECTIONS30Resolutions Supported in PC * Recommended Resolution is 1024x768@60Hz* Max Resolution is 1024x768@75HzResolution31.4731.4737.8637.5031.4737.8848.0846.8848.3656.4860.02Vertical frequency70.0959.9472.8075.0070.0860.3272.1875.0060.0070.0775.03640 x 350720 x 400800 x 6001024 x 768640 x 480Horizontal frequency
31CONNECTIONS
How to Select the Picture Mode .................................................33How to Set the Desired Picture ...................................................34How to Set PIP [Mode] ................................................................35How to Set the Geometry (In PC mode) ......................................37How to Set the Geometry (In DTV mode) ....................................38Picture SetupHYUNDAI WIDE LCD TV
33PICTURE SETUPPress Menu button. Menu items appear on the screen. Press Left, Right or OK button to select “Picture”.Press Up and Down buttons to move to “Mode”.Press Left and Right buttons, then the menu changes in order below. Standard Sport Natural Mild CustomPress MENU button after the setting is done, and Menu goes to the previous menu.If the INPUT button is pressed, the menu disappears.STANDARD : For general contents. It fits most video contents. SPORT : For a clear display or watch sports.NATURAL : For movies or live music.MILD : For a soft display. CUSTOM : When the user wants to set the values see the next page 123How to Select the Picture Mode Users can adjust picture mode automatically according to the input mode(TV, Video1·2·3, S-Video, DVD/DTV, PC).How To Directly Select Picture Mode : Press button. - Users can select Standard Sport Natural Mild Custom, when the input mode is TV, Video1/2/3, S-Video,DVD/DTV, PC. P.MODEPictureSoundClockInstallLanguageAdvancedMENU : Previous : SelectINPUT : Exit OK : Select : PositionStandard617014500ModeContrastBrightnessSharpnessColorTintMENU : Previous : SelectINPUT : Exit : PositionPictureIn the user’s mode, the users can adjust at thier preference Contrast, Brightness, Sharpness, Color, Tint(Hue)in Standard, Sport, Natural, or Mild mode.MENUINPUT
34PICTURE SETUPHYUNDAI LCD TV HQL260WR/320WRHow to Set the Desired PictureUsers can manually adjust the picture in their own ways. Press Menu button. Menu items appear on the screen. Press Left, Right or OK button to select “Picture”.Press Up and Down buttons to Choose one of the items listed.Press Left and Right buttons to adjust.Press MENU button after the setting is done, and Menu goes to the previous menu.If the INPUT button is pressed, the menu disappears.CONTRAST : Adjust the brightness and darkness of object and background. BRIGHTNESS : Adjust the brightness of the entire picture. SHARPNESS : Adjust clarity of outline of objects. This is not applied to DTV, PC mode.COLOR : Adjust colors into deeper or lighter colors. TINT(HUE) : Adjust colors naturally. This is not applied to PC mode.If you adjust the Picture in step 3 while it is in Standard, Sports, Natural or Mild mode, the mode will changeto Custom mode. *Adjustments menu may be different according to the input source.123PictureSoundClockInstallLanguageAdvancedMENU : Previous : SelectINPUT : Exit OK : Select : PositionCustom617014500MENU : Previous : AdjustINPUT : Exit : PositionPictureModeContrastBrightnessSharpnessColourTintMENUINPUT
How to Set PIP [Mode]- You can watch another device's image in the PIP while watching the TV, S-Video, DTV or VIDEO in the main image.- This function is available only with the remote control.35PICTURE SETUPPress the PIP button.You will see the PIP at the upper right corner.Press the INPUT button, then input source changes in order below. TV AV1 VIDEO AV2 VIDEO AV3 VIDEO AV3 S-VHS DTV PC In case of TV mode, you can change the main or PIP TV channelby pressing the Up and Down buttons.Press the Position button, then position changes in order below. Right Up Right Down Left DownLeft Up CenterPress the SIZE button.The PIP will change among 6 different sizes whenever you press this button.Press the P.MODE button, then PIP picture mode changes in order below. Standard Sport Natural Mild Custom54312PPPPIIIIPPPPMMMMaaaaiiiinnnn- Main and sub pictures cannot have the same input source. - While PIP is on, any change to Picture or Geometry in the OSD control menu is applied only for the PIP function. If youwish to make adjustment to Picture or Geometry in the main image, please make sure the PIP function is off.INPUTSIZEP.MODEPOSITIONPIP
Supported PIP TablePIP : O →Supported, X →Not Supported36PICTURE SETUPHYUNDAI LCD TV HQL260WR/320WRPress the SWAP button.The Main image and PIP image will switch with each otherwhenever you press this button.SWAPPIPMainPIPMainPCXXOOOOODTVXXOOOOOPCDTVTVAV1 VideoAV2 VideoAV3 Video AV3 S-VHSSubMain AV3 S-VHS OOOO OO XAV3 Video OOOO OXOAV2 VideoOOOO XOOAV1 VideoOOOXOOOTVOOXOOOO
37PICTURE SETUPPress Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “Geometry”. Press Left, Right or OK button to select “Geometry”. Geometry menu appears.Press Up and Down buttons to Choose one of the items listed.Press Left and Right buttons to adjust.Press MENU button after the setting is done, and Menu goes to the previous menu.If the INPUT button is pressed, the menu disappears.H. SIZE : To adjust the horizontal size of the picture.H. POSITION : To adjust the horizontal position of the picture.V. POSITION : To adjust the vertical position of the picture.PHASE : To adjust to eliminate the shake of picture.RELOAD : To set the Geometry to the default.1234How to Set the Geometry (In PC mode)This function allows you to tune your screen in PC Input Mode.GeometryPictureSoundClockLanguageAdvancedMENU : Previous : SelectINPUT : EXIT OK : Select : PositionH.SizeH.PositionV.PositionPhaseReloadMENU : Previous : AdjustINPUT : Exit : PositionGeometry1001282616INPUTMENU
HYUNDAI LCD TV HQL260WR/320WR38PICTURE SETUPPress Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “Geometry”. Press Left, Right or OK button to select “Geometry”. Geometry menu appears.Press Up and Down buttons to Choose one of the items listed.Press Left and Right buttons to adjust.Press MENU button after the setting is done, and Menu goes to the previous menu.If the INPUT button is pressed, the menu disappears.H. SIZE : To adjust the horizontal size of the picture. H. POSITION : To adjust the horizontal position of the picture. V. POSITION : To adjust the vertical position of the picture. RELOAD : To set the Geometry to the default.1234How to Set the Geometry (In DTV mode)This function allows you to tune your screen in DTV Input Mode.GeometryPictureSoundClockLanguageAdvancedMENU : Previous : SelectINPUT : EXIT OK : Select : PositionH.SizeH.PositionV.PositionReloadMENU : Previous : AdjustINPUT : Exit : PositionGeometry10012833INPUTMENU
39PICTURE SETUP
How to Select the Audio Mode .................................................. 41How to Set the Desired Audio .................................................... 42How to Set the Balance, Volume and Source ............................ 43How to Select SRS WOW(Surround) .......................................... 44How to Listen to Stereo Sound / SAP ......................................... 45Sound SetupHYUNDAI WIDE LCD TV
How to Select the Audio Mode - Users can adjust sound mode automatically as users want.- In SRS On mode, Equalizer in Sound Menu is not activated.How To Directly Select Sound Mode : Press button. Users can select Standard Music Film Speech Custom in order. 41SOUND SETUPPress Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “Sound” .Press Left, Right or OK button to select “Sound”. Press Up and Down buttons to move to “Equalizer”. Press Left, Right or OK button to select “Equalizer”. Press Up and Down buttons, then the mode changes in order below. Standard Music Film Speech CustomPress MENU button after the setting is done, and Menu goes to the previous menu.If the INPUT button is pressed, the menu disappears.STANDARD : For the general sound. This fits most audio contents. MUSIC : For enjoying original sound. FILM : For grandiose sound.SPEECH : For the clear sound. CUSTOM : When the user wants to set the value see the next page 12MENU345PictureSoundClockInstallLanguageAdvancedMENU : Previous : SelectINPUT : Exit OK : Select : PositionBalanceEqualizerVolumeInput SourceMENU : Previous : SelectINPUT : Exit : PositionSound0 50MainMode>> Standard Music Film Speech Custom MENU : Previous : SelectINPUT : Exit : Position100Equalizer3001K3K10KINPUTS.MODE
HYUNDAI LCD TV HQL260How to Set the Desired AudioUsers can manually adjust the sound in thier own ways. 42SOUND SETUPHYUNDAI LCD TV HQL260WR/320WRPress Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “Sound”.Press Left, Right or OK button to select “Sound”.Press Up and Down buttons to move to “Equalizer”. Press Left, Right or OK button to select “Equalizer”. Press Left and Right buttons tochoose one of the items listed. 100 300 1K 3K 10KThen Press Up and Down buttons to adjust.Press MENU button after the setting is done, and Menu goes to the previous menu.If the INPUT button is pressed, the menu disappears.MENU123456If you adjust the frequency (100Hz, 300Hz, 1KHz, 3KHz, 10KHz) in Standard, Music, Film or Speech mode, themode will change to Custom mode.PictureSoundClockInstallLanguageAdvancedMENU : Previous : SelectINPUT : Exit OK : Select : PositionBalanceEqualizerVolumeInput SourceMENU : Previous : SelectINPUT : Exit : PositionSound0 50MainMode Standard Music Film Speech>> Custom MENU : Previous : AdjustINPUT : Exit : Position100Equalizer3001K3K10KINPUT
SOUND SETUP43How to Set the Balance, Volume and Sound SourcePress Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “Sound”.Press Left, Right or OK button to select “Sound”.Press Up and Down buttons to move to “Balance” or “Volume”. Then Press Left and Right buttons to adjust.If you need to select the sound source, go to step 5Press Up and Down buttons to move to “Input Source”. Press Left and Right buttons, then input source changes to “Main/Pip”.Press MENU button after the setting is done, and Menu goes to the previous menu.If the INPUT button is pressed, the menu disappears.MENU123456PictureSoundClockInstallLanguageAdvancedMENU : Previous : SelectINPUT : Exit OK : Select : PositionBalanceEqualizerVolumeInput SourceMENU : Previous : SelectINPUT : Exit : PositionSound0 50MainBalanceEqualizerVolumeInput SourceMENU : Previous : AdjustINPUT : Exit : PositionSoundR5 50MainBalanceEqualizerVolumeInput SourceMENU : Previous : SelectINPUT : Exit : PositionSoundR5 50MainINPUT- You can listen to the main picture's sound when the PIP is off even if you select PIP mode sound.- You will have sound only through the headphones, not the speakers, if you connect headphones. (mute) Youcan adjust the headphones' volume by pressing thebutton.- When you would like to have sound through the headphones, if you connect a set of headphones to your TV,the volume level will be decreased automatically without concerrning the previous volume setting.
HYUNDAI LCD TV HQL260WR/320WR44SOUND SETUPHow to Select SRS WOW(Surround) - You can enjoy the spectacular, clear and crisp sound.- This function is available only with the remote control.Press the button on the remote control to select SRS WOW.Then SRS WOW changes to “On/Off”.*In SRS On mode, Equalizer in Sound Menu is not activated.*In SRS On mode, pressing on the remote control displays "SRS working".S.MODES.EFFECTis a trademark of SRS Labs, Inc.WOW technology is incorporated under license from SRS Labs, Inc.Remarkable Enhancement for Mono or Stereo PlaybackWOWTM‚ is an award-winning, patented technology that significantly enhances the quality of mono and stereo audio material. It creates theperception of improved dynamics and bass performance over standard speakers or headphones.WOW makes up for the limitations inherent in smaller speakers and headphones by providing a panoramic three-dimensional audio imagethat extends the sound in both the horizontal and vertical planes well beyond the speakers or headphones themselves. As a result,manufacturers of small audio devices, televisions, wireless and personal/portable products can dramatically improve their product’s audioperformance without enlarging the speaker size. The enriching effects of WOW are especially noticeable on digitally compressed mono orstereo audio in formats such as MP3, WMA and audio CD in which the “tinny” hollow sound is greatly reduced.SRS OnSRS workingS.EFFECTS.MODE
45SOUND SETUPHow to Listen to Stereo Sound / SAP- Depending on the particular program being broadcast, you can listen to stereo, mono, or a Secondary AudioProgram. (SAP audio is usually a foreign-language translation. Sometimes SAP has unrelated information likenews or weather.)- This function is available only with the remote control.• If the signal reception conditions deteriorate, setting to Mono will make your listening condition better.• If the stereo signal is weak and automatic mode switching occurs, then the current mode is switched to theMono.Press the MTS button on the remote control to select Stereo Sound / SAP.You can select sound options (Mono, Stereo, SAP, Mono+SAP) depending on the broadcastingsignal by pressing MTS button on the remote control.STEREO : Choose Stereo for channels that are broadcasting in stereo.MONO : Choose Mono for channels that are broadcasting in mono, or if you are havingdifficulty receiving a stereo signal.SAP : Choose SAP to listen to the Secondary Audio Program, which is usually a foreign-language translation.MonoStereo1. Displays present received sound state.2. When you select sound options using the button.12MTSMTSOptionBroadcasting M+SAPMSM+SAPM+SAPSAPMMSAPSAPSMSMSMMMMMMSM+SAPS+SAP
How to Store Channel Automatically ......................................... 47How to Set Channel Fine Tuning ............................................... 48How to Add/Erase Channel ........................................................ 49Using the LNA(Low-Noise-Amplifier) Feature ............................ 50How to Select the Parental Lock Mode ...................................... 51How to Set the Desired Parental Lock ....................................... 52Channel SetupHYUNDAI WIDE LCD TV
CHANNEL SETUP47How to Store Channel AutomaticallyYou can scan channels available to you automatically. First of all, you can select the Air or Cable before setup the Channel Searching.123If you press the MENU button in the middle of Auto tuning, the first stored channel will be displayed, and theAuto tuning stops. 456Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “Install”. Press Left, Right or OK button to select “Install”.Press Up and Down buttons to move to “Select”.Press Left and Right buttons to select“TV/CATV”Press Up and Down buttons to move to “Auto Tuning”.Press Left, Right or OK button, then it will be stored the searched channels.After completing Channel Searching, It will return to the previous channel.PictureSoundClockInstallLanguageAdvancedMENU : Previous : SelectINPUT : Exit OK : Select : PositionAuto tunningSelectChannelFine TunningLNAAdd/EraseParental Lock CATV573.25OffErase - - - -MENU : Previous : SelectINPUT : Exit : PositionInstallAuto tunningSelectChannelFine TunningLNAAdd/EraseParental Lock CATV573.25OffErase - - - -MENU : Previous : Access INPUT : Exit OK : Access : PositionInstallMENU
HYUNDAI LCD TV HQL260WR/320WRCHANNEL SETUP48Band limit of the fine tuning is ± 2Mbyte.How to Set Channel Fine Tuning If the signal is weak or distorted, you may have to fine tune the channel manually.1234Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “Install”. Press Left, Right or OK buttons to select “Install”.Press Up and Down buttons to move to “Fine Tuning”.Press Left and Right buttons to adjust screen.Channel Number is current channel.The fine tuned channels are automatically stored.Press MENU button after the setting is done, and Menu goes to the previous menu.If the INPUT button is pressed, the menu disappears.PictureSoundClockInstallLanguageAdvancedMENU : Previous : SelectINPUT : Exit OK : Select : PositionAuto tunningSelectChannelFine TunningLNAAdd/EraseParental Lock CATV10193.25OffErase - - - -MENU : Previous : AdjustINPUT : Exit : PositionInstallMENUINPUT
When Channel Display Color is green, this indicates the current channel has been stored (Add). When ChannelDisplay Color is red, this indicates the current channel has not been stored (Erase).ADD/ERASE49CHANNEL SETUPHow to Add/Erase ChannelThis function allows you to manually store or erase the desired channels while watching a program.How To Directly Select ADD/ERASE Channel : Press button. The selection will switch whenever you press the Add/Erase button on the remote control.1234Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “Install”. Press Left, Right or OK buttons to select “Install”.Press Up and Down buttons to move to “Add/Erase”.Channel Number is current channel.Press Left and Right buttons to select“Add/Erase”.Press MENU button after the setting is done, and Menu goes to the previous menu.If the INPUT button is pressed, the menu disappears.PictureSoundClockInstallLanguageAdvancedMENU : Previous : SelectINPUT : Exit OK : Select : PositionAuto tunningSelectChannelFine TunningLNAAdd/EraseParental Lock CATV5193.31OnErase - - - -MENU : Previous : SelectINPUT : Exit : PositionInstallMENUINPUT
HYUNDAI LCD TV HQL260WR/320WR50CHANNEL SETUPUsing the LNA(Low-Noise-Amplifier) FeatureIf the signal is weak or distorted, you use this function.1234Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “Install”. Press Left, Right or OK buttons to select “Install”.Press Up and Down buttons to move to “LNA”.Press Left and Right buttons to select“On/Off”.Press MENU button after the setting is done, and Menu goes to the previous menu.If the INPUT button is pressed, the menu disappears.PictureSoundClockInstallLanguageAdvancedMENU : Previous : SelectINPUT : Exit OK : Select : PositionAuto tunningSelectChannelFine TunningLNAAdd/EraseParental Lock CATV5193.31OffErase- - - -MENU : Previous : SelectINPUT : Exit : PositionInstallMENUINPUT
51CHANNEL SETUPHow to Select the Parental Lock ModeThe V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user mustenter a Password before any of the V-Chip restrictions are set up or changed.Note : When the V-chip feature is activated, the PIP and auto channel program features do not function.1235Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “Install”. Press Left, Right or OK buttons to select “Install”.Press Up and Down buttons to move to “Parental Lock”.Enter your 4-digit password.(The default password for a new TV set is “0119”.)Then new menu apears.Press Left and Right button, then the menu changes in order below. Off Child Youth Young Adult CustomPress MENU button after the setting is done, and Menu goes to the previous menu.If the INPUT button is pressed, the menu disappears.OFF : Parental lock is disabled. All programs are unblocked from viewing.CHILD : The permitted Maximum ratings are TV-Y, TV-G, G.YOUTH : The permitted Maximum ratings are TV-PG, PG.YOUNG ADULT : The permitted Maximum ratings are TV-14, PG-13.CUSTOM : Select to set ratings manually. see the next page PictureSoundClockInstallLanguageAdvancedMENU : Previous : SelectINPUT : Exit OK : Select : PositionAuto tunningSelectChannelFine TunningLNAAdd/EraseParental Lock CATV5193.31OnAdd - - - -MENU : Previous 0-9 : InsertINPUT : Exit : PositionInstallParental LockMovie RatingGenenalChildrenContent BlockNot RatedAV SourcesChange PasswordOffUnblockUnblockUnblockUnblockUnblock- - - -MENU : Previous : SelectINPUT : Exit : PositionInstallMENUINPUT4
HYUNDAI LCD TV HQL260WR/320WRCHANNEL SETUP52How to Set the Desired Parental LockUsers can manually adjust the Parental Lock in their own ways. 12365Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “Install”. Press Left, Right or OK buttons to select “Install”.Press Up and Down buttons to move to “Parental Lock”.Enter your 4-digit password.(The default password for a new TV set is “0119”.)Then new menu apears.Go to step 5, if you need to set restrictions using the MPAA ratings system.Press Up and Down to move to “Movie Rating”.Press Left and Right button, then the menu changes in order below.G PG PG-13 R NC-17 X Unblock Countinued on next page ......PictureSoundClockInstallLanguageAdvancedMENU : Previous : SelectINPUT : Exit OK : Select : PositionAuto tunningSelectChannelFine TunningLNAAdd/EraseParental Lock CATV5193.31OnAdd # # # -MENU : Previous 0-9 : InsertINPUT : Exit : PositionInstallMENUParental LockMovie RatingGenenalChildrenContent BlockNot RatedAV SourcesChange PasswordOffUnblockUnblockUnblockUnblockUnblock- - - -MENU : Previous : SelectINPUT : Exit : PositionInstallParental LockMovie RatingGenenalChildrenContent BlockNot RatedAV SourcesChange PasswordCustomUnblockUnblockUnblockUnblockUnblock- - - -MENU : Previous : SelectINPUT : Exit : PositionInstall4
CHANNEL SETUP53...... Continued from previous page.8Parental LockMovie RatingGenenalChildrenContent BlockNot RatedAV SourcesChange PasswordCustomPG-13UnblockUnblockUnblockUnblock- - - -MENU : Previous : SelectINPUT : Exit : PositionInstallParental LockMovie RatingGenenalChildrenContent BlockNot RatedAV SourcesChange PasswordCustomPG-13TV-GUnblockUnblockUnblock- - - -MENU : Previous : SelectINPUT : Exit : PositionInstall79G: All children and General audience.PG : Parental guidance suggested.PG-13 : Parental guidance for children under 13.R: Restricted viewing, parental guidance is suggested for children under 17.NC-17 : No children under age 17.X: Adults only.Unblock : Not rated.Go to step 7, if you need to set restrictions using the TV guidelines (Age-Based).Press Up and Down buttons to move to “General”.Press Left and Right button, then the menu changes in order below.TV-G TV-PG TV-14 TV-MA Unblock TV-G : General audience. TV-PG : Parental guidance suggested.TV-14: Parents strongly cautioned. TV-MA : Mature audience.Unblock : Not rated.Go to step 9,if you need to set TV Program for Children.Press Up and Down buttons to move to “Children”.Countinued on next page ......
HYUNDAI LCD TV HQL260WR/320WRCHANNEL SETUP54...... Continued from previous page.101413Parental LockMovie RatingGenenalChildrenContent BlockNot RatedAV SourcesChange PasswordCustomPG-13TV-GUnblockUnblockUnblock- - - -MENU : Previous : SelectINPUT : Exit : PositionInstall1112Parental LockMovie RatingGenenalChildrenContent BlockNot RatedAV SourcesChange PasswordCustomPG-13TV-GTV-Y7UnblockUnblock- - - -MENU : Previous : SelectINPUT : Exit : PositionInstallF ViolenceDialogueLangugaeSex ScenesViolenceUnblockUnblockUnblockUnblockUnblockMENU : Previous : SelectINPUT : Exit : PositionContent BlockSub-ratingsF ViolenceDialogueLanguageSex ScenesViolenceRestrictive ratingsTV-T7 -> UnblockTV PG -> TV-14 -> UnblockTV PG -> TV-14 -> TV-MA -> UnblockTV-PG -> TV-14 -> TV-MA -> UnblockTV-PG -> TV-14 -> TV-MA -> UnblockPress Left and Right button, then the menu changes in order below.TV-Y TV-Y7 Unblock TV-Y : Young children.TV-Y7: Child 7 and over.Unblock : Not rated.Go to step 11, if you need to set restrictions using the TV guidelines (Content -Based)Press Up and Down buttons to move to “Content Block”.Press Left and Right button, then Content Block menu appears.Press Up and Down button to Choose one of the items listed.Press Left and Right buttons to set.You can select one of the restriction ratings in the each sub-rating mode.Countinued on next page ......
CHANNEL SETUP55...... Continued from previous page.141516Parental LockMovie RatingGenenalChildrenContent BlockNot RatedAV SourcesChange PasswordCustomPG-13TV-GTV-Y7UnblockUnblock- - - -MENU : Previous : SelectINPUT : Exit : PositionInstallParental LockMovie RatingGenenalChildrenContent BlockNot RatedAV SourcesChange PasswordCustomPG-13TV-GTV-Y7BlockUnblock- - - -MENU : Previous : SelectINPUT : Exit : PositionInstallParental LockMovie RatingGenenalChildrenContent BlockNot RatedAV SourcesChange PasswordCustomPG-13TV-GTV-Y7BlockUnblock# # # #MENU : Previous : SelectINPUT : Exit : PositionInstall171819Press the Menu Button and Go to step 14, if you need to set Block/ Unblock of Not rated program.Press Up and Down buttons to move to “Not Rated”.Press Left and Right buttons to select “Unblock/Block”.BLOCK : When TV signal or movies display without restriction ratings,TV or Movies signal will be blocked, and a blank screen will be displayed.UNBLOCK : When TV signal or movies display without restriction ratings, All signals will be unblocked, and you can view any other programPress the Menu Button and Go to step 16, if you need to set Block/ Unblock the AV Sources.Press Up and Down buttons to move to “AV Source”.Press Left and Right buttons to select “Unblock/Block”.*Block - Blocks all AV sources. Unblock - Unblock all AV sources.Go to step 18, if you need to set changing the Password.Press Up and Down buttons to move to “Change Password”.Enter your new 4-digit password by using the numeric keys. When “Repeat Password” appears, enter your new password again.Countinued on next page ......
HYUNDAI LCD TV HQL260WR/320WRCHANNEL SETUPIf you forget the password, enter the defult password.The defult password “0119” (On the Remote Control)This message should be printed on a separate page of paper or on a page of the manual that can be removedby a parent and put in a safe place where the children cannot find this message!!56
57CHANNEL SETUP

Navigation menu