Hyundai IBT LT40DW000 40-inch LCD TV Monitor User Manual

Hyundai IBT Corp. 40-inch LCD TV Monitor

Contents

Users Manual 1 of 2

FCC ID : PJILT40DW000 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-FO5-1101 1/1 ATTACHMENT E. - USER’S MANUAL -
P/N 632 0239 201 Rev.00USAAVC Tech777 Mark St., Wood Dale, IL 60191Tel : 800-568-0060 or 630-595-0123Fax : 800-784-9422 or 630-595-2345e-mail : service@hyundaimonitor.com NEW ZEALANDTRANSTECH DISTRIBUTORS Ltd.PO Box 12985 Penrose,Auckland New ZealandTel : 09-571-0775Fax : 09-571-0776e-mail : LouisG@Transtech.co.nzWWW : www.transtech.co.nzAUSTRALIAThomas Electronics Australia Pty Ltd.3 Sheridan CloseMilperra NSW 2214, AustraliaTel : +61 2 9773 7400Fax : 61 2 9773 7177Attn : Ms. Shiely PonimanGERMANYHyundai ImageQuest Europe GmbHGeheimrat Hummel Platz 265239, Hochheim, GermanyTel : 06146 / 904 444Fax : 06146 / 904 410e-mail : service@hyundaiq.deWWW : www.hyundaiq.comJAPANHyundai ImageQuest JAPANShin-Hibiya Bldg, East 5F 1-3-6Uchisaiwai-Cho, Chiyoda-ku,Tokyo, Japan 100-0011Tel : 03-5157-2286Fax : 03-5157-2284e-mail : pjkim@iqt.co.krC/S P.J.Kim
Important TipImage Retention Effect (Image Sticking)1. Cause : - Image Retention Effect may come from displaying a still picture in certain period of time with at acertain area continuously, as the feature of LCD panel. This is caused due to brightness degradation.Many LCD manufacturers are trying to overcome this limitation.2. Prevention- To avoid this matter, use the product after reducing brightness and contrast, especially when a stillimage is displaying for a long time. (Contrast 50/Brightness 50 - See 30 page)Once image retention occurs, use the mode that displays more motion pictures. It will help reduce thismatter.3. Solution - The temporary image sticking would decrease with displaying Full-White pattern during 10 hours.* The permanent image sticking could not take off under the latest technology.This method may be used to eliminate a temporary retained image that occurs after displaying a stillimage for a certain period of time. Since it may take several minutes to several hours to remove imagesticking, it is recommendable to display motion pictures during 2~3 minutes every hour when keepingdisplaying a still image. As image sticking is influenced by the brightness of a still image beingdisplayed and its display time, it is recommended that you reduce the brightness of the screen whendisplaying a still image for a long time. * Image Sticking does not come under the warranty.
FCC InformationUser InstructionsThe Federal Communications Commission Radio Frequency Interference Statement includes thefollowing warning :NOTE : This equipment has been tested and found to comply with the limits for a Class B digital devicepursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses, and can radiate radio frequency energy and, ifnot installed and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particularinstallation.If this equipment does cause harmful interference to radio or television receptions, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures :• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.• Consult the dealer or an experienced radio/TV technician for assistance.User InformationChanges or modifications not expressly approved by the party responsible for compliance could voidthe user’s authority to operate the equipment.Connecting of peripherals requires the use of grounded shielded signal cables.
HYUNDAI Vvuon Digital LCD TVImage Sticking PrecautionWhen watching a still Image within motion pictures andPanorama/Wide/4:3 screen1. Note : - When the central area of the screen and the screen edges are fixed, the different brightness level ofthe edges may cause image retention on the edges when watching for a long time- This phenomenon is the same matter to other LCD manufacturers. Please do not watch a still imagefor a long time.- If you watch a still image for a long time, this may damage your TV.* This matter does not come under the warranty. Panorama, Wide, 4:3 screenBox still image
FeaturesIntegrated HDTV An HDTV has a built-in ATSC digital tuner.It does not need a separate set-top box to receive over the-air DTV signal.Dual Scan/Multi-ViewingYou can program analog TV broadcasting and digital TV broadcasting automatically at the same timefor multi-viewing.A Wide Array of Screen SettingsYou can choose different screen settings depending on the type of program you are watching or thesurrounding conditions (the outside weather conditions). You can switch among Standard, Dynamic,Movie, and Mild options or you can configure the screen settings for yourself.A Wide Array of Sound SettingsYou can choose an optimal sound setting for the type of program you are watching.You can switch among Standard, News, Music, and Sport options or you can configure the soundsettings for yourself.TV Program Reservation If you reserve a digital TV program you are going to watch, the channel you are currently watching isautomatically switched to the reserved channel. Favorite Channel MemoryYou can memorize the channels you are watching frequently.SRS TrueSurround XTYou can enjoy dynamic and surround sound with ordinary speakers.Dolby-DigitalWhen receiving digital broadcast signal, you can enjoy dynamic and surround sound with twoordinary speakers just like Dolby 5.1.A Variety of Aspect RatiosYou can adjust the screen size at your preference.Auto On/Off FunctionThis function allows you to turn on or off your TV at the preset time.Game Prevention FunctionThis function is designed to prevent a VCR or game player from being connected to the TV.Memory Card SupportYou can enjoy photo images, music files and movies by inserting a variety of memory cards.
HYUNDAI Vvuon Digital LCD TVTable of ContentsGeneral InformationSafety Precaution ................................................................5Contents of the Package .......................................................9Products Sold Separately ......................................................9Kensington Lock Anti-theft Device ......................................10How to Mount and Detach The Speakers ...........................11How to adjust the view angle ..............................................12How To Install Wall Mount Support .....................................13Parts Names and Functions ................................................15Remote Control ...................................................................17Connections How to Watch Both Analog and Digital Broadcastswith a Single Antenna .........................................................19How to Watch Both Analog and Digital Broadcastswith Two Antennas .............................................................20Before Connecting the Video/Audio Connections toExternal Devices... .............................................................21How to Connect a VCR/Cable Receiver ................................22How to Connect a DTV Receiver or DVD Player ....................23How to Connect a Camcorder/Game Player .........................24How to Connect to a PC ......................................................25How to Connect an External Visual Device ...........................27How to Use Digital Sound ....................................................28Picture SetupHow to Select the Picture Mode ..........................................29How to Set the Desired Picture ...........................................30How to Adjust the Color Temperature of the Screen ............31How to Select the Aspect Ratio ...........................................32How to Watch the PIP .........................................................34How to Set the INPUT for the Sub-Picture ...........................35How to Reduce Noise ..........................................................37Sound SetupHow to Select the Audio Mode ............................................38How to Adjust the Desired Audio Mode ..............................39How to Use the Automatic Volume Control ..........................40How to Select MTS(Multi-Channel Sound) ...........................41How to Listen to SRS TruSurround XT (Surround) ................42How to Set the Output of Subwoofer ...................................43How to Set the Audio Output ...............................................44How to Set the Digital Audio Output ....................................45How to Set Audio Language ................................................46Channel SetupHow to Store Channels Automatically ..................................47How to Add/Erase Channels Manually .................................48How to Set Favorite Channels .............................................49How to Fine Tune Channel Reception ..................................50How to the LNA (Low-Noise-Amplifier) Feature ...................51Function SetupHow to Choose Your Language ...........................................52How to Set Clock, On/Off Time, Sleep Time ........................53How to Set the Geometry in PC Mode ..................................55How to Set Key Lock ...........................................................56How To Set Block Program .................................................58How to View Closed Captions ..............................................60DTV SetupHow to Use the Current Channel Guide ..............................62How to Reserve TV Programs Using the Total Channel Guide....62How to Use TV Program Reservation ...................................63How to Check or Cancel a Scheduled TV Program ...............64How to Use Memory Mode...............................65AppendixHow to Use an External Device Using the Remote Control ...73Glossary .............................................................................76Troubleshooting ..................................................................79Care and Cleaning ..............................................................81Product Specifications ........................................................82
GENERAL INFORMATION5Safety Precaution The contents of this section are provided for the safety of users and their property.Please read the instructions carefully before using.Do not connect multiple electricalappliances to a single outlet.- It may cause a fire due to overheating fromthe outlet.Outdoor Antenna Grounding If an outside antenna or cable system is connected to the TV, be sure the antenna orcable system is grounded so as to provide some protection against voltage surgesand built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPANo.70-1984, provides information about proper grounding of the mast and supportingstructure, grounding of the lead-in wire to an antenna discharge unit, size ofgrounding conductors, location of antenna discharge unit, connection to groundingelectrodes, and requirements for the grounding electrode.Example of Grounding According to National Electrical CodeInstructionDo not use or store a flammablespray or inflammable things near theTV.- They may cause explosion or fire.Do not install the TV in abookshelf, closet, or a place wherethere is poor air circulation.- Fire may be caused due to the rise ofinternal temperature.Make sure to remove the speakersbefore moving the TV with speakersmounted on it. - When the speakers are detached from theunit while carrying it, this may cause damageto the unit or personal injury. Any necessary action such as making theantenna cable loop at the entrance of thebuilding should be taken to prevent rainwateron the outdoor antenna cable from possiblyrunning into the indoor.- If raindrop gets into the LCD TV, it maycause a fire or an electric shock.
6HYUNDAI Vvuon Digital LCD TVGENERAL INFORMATIONIf there is a persistent accumulationof dusts or water on the plug, pleasemake sure to wipe it off using a drycloth.- It may cause a fire or an electric shock.Firmly plug in the power cord so thatit does not pull out.- An unstable connection may cause fire.Do not use a damaged power cordor plug, or loose outlet.- It may cause electric shock or fire.Do not put a water bowl, vase,candle, bug repellant smoke,cigarette, plants, or heavy thing onthe TV.- It may cause electric shock or fire and alsoheavy things may cause injury when theyfall.Do not install in a place where thereis oil, smoke, excessive humidity, orwhere water may be sprinkled on it.- This may cause electric shock or fire.Do not install on an unstable placeor small support.- This may cause the TV to fall, resulting inserious injury to a child or adult.Never attempt to open, fix, or modifyyour TV.- When there is a need for fixing, call aservice center. Fire or electric shock may becaused.Do not put a metallic object like chopstick,wire, or puncher or inflammables like paperor a match in a vent, headphone jack, or AVjacks of the TV.- Electric shock or fire may be caused.When the TV produces abnormal noise,burning smell, or smoke, unplug the TVimmediately and call a service center.- Electric shock or fire may be caused.
GENERAL INFORMATION7Safety Precaution ......................................Continued from previous pageThe contents of this section are provided for the safety of users and their property.Please read the instructions carefully before using.Do not place any heat sources such asradiators and heat registers, etc. near the TV.- It may cause a fire.Do not block ventilating slits with a tablecloth.- Blocking the ventilation slits may produceinner heat increase, resulting in a fire.Keep the TV at least 10cm away from thewall for ventilation.- Fire may be caused due to the rise of innertemperature.Do not allow children to climb or play on theTV.- If it falls over on children, it may causeserious injury.Do not place toys and cookies, etc. on the TV,which may attract children’s attention. - If it falls over on children, it may cause seriousinjury. When cleaning the TV, make sure todisconnect the power plug and use a dry, softcloth for a cleanup.- Please avoid using chemicals such as wax,benzene, alcohol, thinner, mosquito spray,air freshener, lubricant or syntheticdetergent.Unplug when you do not use your TV for along time.- If dust is stacked on the TV, electric shockor fire may be caused from heat, fire, ordeterioration of insulation.When moving the TV, two or more people areadvised to carry it.- Injury or damage may be caused when theTV falls.Consult a service center or customer servicefor inside cleaning about once a year.- When dust is piled inside the TV for longtime, fire or malfunction may be caused.
8HYUNDAI Vvuon Digital LCD TVGENERAL INFORMATIONDo not install the product on the floor.- If it falls over, your child may be injured.Unplug the product during lightning orthunderstorms and never touch the antennacable.- It may cause a fire or an electric shock.Keep the remote control batteries out ofsight and out reach of children.- If your child swallows a battery, see yourdoctor immediately.When replacing batteries, make sure tomatch the batteries to the (+) and (-) marksin the battery compartment.- Mismatching of polarities may result ininternal damage to batteries, fire due toleakage or contamination.Always use the standard batteries and avoidusing old batteries together with new ones.- Otherwise it may result in internal damageto batteries, fire due to leakage orcontamination.In the event of damaging or dropping theproduct, switch off the power and removethe plug.- Using a damaged product may cause anelectric shock or a fire.- Contact your local service center.Before moving the product, ensure to switchoff the power and unplug all the electricalcords and the external connection cords suchas an antenna cable and other sourceconnections, etc.- An electrical cord(s) may be damaged,resulting in a fire or an electrical shock.Ensure the power cord doesn’t trailacross any hot objects like a heater.- This may cause a fire or an electric shock.Consult a service center or customerservice for inside cleaning aboutonce a year. - When dust is piled inside the PDP for long time,fire or malfunction may be caused.
GENERAL INFORMATION15Volume buttonsUse these buttons for your desired sound level.These buttons also serve as the cursor ofSelect/Adjust when in Menu mode.Channel buttonsUse these buttons to change channels. Thesebuttons also serve as the cursor of Down andUp buttons when in Menu mode.Select buttonUse this button to select each item of menu.Menu buttonUse this button to display or exit from menus.Source buttonUse this button to switch among inputsconnected to the TV.Remote sensor and power LED.- Point the remote control toward here.- It displays standby or operation status.IndicatorRedGreenStatusStandbyPower on* This product image may be a bit different from the actual product.SpeakersSee page 8 for information on how to mountspeakers.Power buttonUse this button to turn on or off the TV.Power buttonUse this button to turn on or off the TV.➋➌➊➒➑➐➏➎➍
GENERAL INFORMATIONRear ViewHYUNDAI Vvuon Digital LCD TV16Power (AC) input terminal Connect the power cord to thisterminal.DVI Video input terminalD-SUB input terminalDVI/D-SUB Audio input terminalSubwoofer output terminalWhen producing bass, connect thecable to the woofer with *AMP.Component 2 Video input terminalComponent 2 Audio input terminalComponent 1 Video input terminalComponent 1 Audio input terminalS-Video input terminalVideo input terminalS-Video/Video Audio input terminalRS-232 input terminalConnect to the RS-232 terminal of aPC to check its service.Monitor Video output terminalMonitor Audio output terminalAntenna 1 (Analog/DTV) inputterminalAntenna 2 (DTV) input terminalDigital Audio output terminal forcoaxial cableSPDF optical digital audio outputterminalMemory Card SlotUSB Input Terminal* This product image may be a bit different from the actual product.
GENERAL INFORMATION17Remote Control1. POWER/STANDBY2. MUTEThis button is also used when setting up to use other externaldevice.3. PIP FUNCTIONS- PIP : Use this button for PIP On/Off.- INPUT : Use this button to select the input source of sub-picture.- SIZE : Use this button to select the size of sub-picture.- SWAP : Use this button to swap main and sub-picture.- POSITION : Use this button to select the position of sub-picture.4. A/D+Use this button to switch analog input signal to digital signal.5. Previous ChannelUse this button to return to the previous channel.6. Other external device selection (73P)7. MENU SELECTIONUse this button to select menu items.8. LEFT/RIGHT MOVE/ADJUSTUse these buttons to move between menu items or to adjusteach item.9. MENUUse this button to call the OSD to the screen.10. EXITUse this button to end the OSD.11. CHANNEL SELECTIONUse this button to select the channel.12-13. SUB-PICTURE CHANNEL SELECTION14. PC AUTOUse this button to automatically adjust the screen in PC Mode.15. DTV-GUIDEUse this button to see digital broadcast information.16. SRSUse this button to select 3D surround sound.17. SAPUse this button to listen in a foreign language or in StereoMode. 30
GENERAL INFORMATIONHYUNDAI Vvuon Digital LCD TV18How to Insert Batteries in Remote Control * Battery type :1.5V/AAAPress and hold Δpart and pushto open cover. Insert batteries with properpolarities of +and -.Use the remote control with coverclosed.18. PICTURE MODE19. SOUND MODE20. BOOK-MARKUse this button to select/deselect your frequently-usedchannel.21. FAVORITE Use this button when watching your favorite channel.22. ADD/ERASEUse this button to add or erase channels.23. INFOMATIONUse this button to display resolution or various programinformation.24. SOURCEUse this button to select External Input or Memory Mode.25. VOLUME26. STILL27. SLEEP28. ASPECT RATIOUse this button to change the picture size.29. NUMERIC KEYS30. Use this buttons to use other manufacturer’s DVD orVCR.Using buttons when in Memory ModeThe following buttons are used differently in eachmenu. (See pages 67~72 for more details.)Power Saving Function when listening to musicMusic Playback Setting (Repeat 1, Repeat All, Sequence)Select, Start, Pause/PlaybackMove between file listings, Previous Track/Next Track, Reverse/Fast Forward, Photo RotationExit, CancelEject CardSlide ShowZoom InCheck Version (Initial Screen), Check Running Time (Movie Mode)Hide MenuWhen Shifting into Memory ModeOther buttons available in Memory Mode
CONNECTIONS19How to Watch Both Analog and Digital Broadcasts with a Single AntennaYou can watch both analog and digital broadcasts by connecting a single antenna.Connection MethodMake sure that the antenna cable is connected to ANT 1 (ATV/DTV).- Antenna or Cable service without a cable box connections- For optimum picture quality, adjust antenna direction if need,How to WatchTurn on TV to activate Auto Channel (See page 47) to memorize the available channels.Press INPUT on remote control.Press to move to Analog TV or Digital TV and press to select.Press button or button to select the desired channels.Ex.) When you want to watch cable channel number 120, press + +the digit buttons.1234- When inserting a 75 ohm coaxial cable into the input connection, ensure the wire tip not to bend.- If you experience poor signal reception, we recommend you purchase a signal amplifier for better picture quality.While watching digital broadcast, you can switch a digital signal to an analog signal by pressing the button.VHF AntennaUHF AntennaAntenna cable
CONNECTIONSHYUNDAI Vvuon Digital LCD TV20How to Watch Both Analog and Digital Broadcasts with Two AntennasConnection MethodConnect an analog antenna to ANT 1 terminal for analog source and a digital antenna to ANT 2 terminal for digitalsource. Please ensure to connect an antenna to a correct terminal. (If you connect an analog antenna cable to ANT2, you cannot watch TV program.)How to WatchTurn on TV to activate Auto Channel (See page 47) to memorize the available channels.Press INPUT on remote control.Press to move to Analog TV or Digital TV and press to select.Press button or button to select the desired channels.Ex.) When you want to watch cable channel number 120, press + +the digit buttons.1234- When inserting a 75 ohm coaxial cable into the input connection, ensure the wire tip not to bend.- If you experience poor signal reception, we recommend you purchase a signal amplifier for better picture quality.While watching analog broadcast, you can switch an analog signal to a digital signal by pressing the button.Analog TV antenna cableDigital TV antenna cable
CONNECTIONS21- When connecting an external device, ensure to read the connecting device’s manual. The location or the numberof the terminals on the external device may be different depending on its model. - Connect a DVI connection to the output of DVD, cable receiver or satellite receiver. Connecting a DVI connection toa PC may result in a message, “Unknown Signal”. - Do not power on until all necessary connections are made. If power is given before connections completed, thismay damage the product. - Make sure to match the cable in color with the terminal.- Make sure to check the type of terminals to be connected.Before Connecting the Video/Audio Connections to External Devices... Please make sure to read the following information on connection to enjoy best picture quality.Video/Audio connectorsTypes of video/audio cable :➀ DVI-D ➁ 15-Pin D-Sub ➂ COMPONENT ➃ S-VIDEO ➄ COMPOSITE Best picture quality is displayed in the following order.The superior picture quality starts from the far left side.
CONNECTIONSHYUNDAI Vvuon Digital LCD TV22How to Connect a VCR/Cable ReceiverConnection MethodConnect the Video cable or S-Video cable between Video/S-Video output terminal of VCR or Cable receiver andVideo/S-Video input terminal of TV. (Connect the jacks to terminals in the same color.)Connect the Audio cable (Left: white, Right: red) between Audio output terminal of VCR or cable receiver andAudio input terminal of TV. (Connect the jacks to terminals in the same color.)How to WatchTurn on TV to press on remote control.Press to move to Video or S-Video and press to select.For more information, read the user’s guide of VCR or cable receiver. 112To enjoy better picture quality, use the S-Video cable rather than the composite cable. Audio cableVideo cable orS-Video CableVideo/Cable receiver2
CONNECTIONS23How to Connect a DTV Receiver or DVD PlayerConnection MethodConnect the Video cable (Y, Pb, Pr) between output terminals (Y, Pb, Pr) of DTV receiver or DVD player and theinput terminals (Y, Pb, Pr) of DTV/DVD (480i/480p/720p/1080i) on the rear of TV. (Connect the jacks to terminal in the same color.)Connect the Audio cable between Audio output terminal of DTV receiver or DVD player and Audio inputterminal for DTV/DVD Audio on the rear of TV. (Connect the jacks to terminals in the same color.)How to WatchTurn on TV and press on remote control. Press to move Component 1 or Component 2 and press to select.For more information, read the user’s guide of DTV receiver or DVD player.1- Output terminal mark (Y, Pb, and Pr) of DVD player may be indicated as Y, B-Y, R-Y/Y-Cb-Cr /Y-Pb-Pr accordingto the type of DVD player models.- If your DVD player or Set Top Box supports DVI/D-SUB, see Connecting to a PC (page 25) for connection. Youcan enjoy more clear picture quality.12Audio cable2Video (Y, Pb, Pr) cableDTV receiver / DVD Player
CONNECTIONSHYUNDAI Vvuon Digital LCD TV24How to Connect a Camcorder/Game PlayerConnection MethodConnect the Video/S-Video cable between Video/S-Video output terminal of Camcorder/Game player andVideo/S-Video input terminal of TV. (Connect cables and terminal in the same colors.)Connect the Audio cable (Left-white, Right-red) between Audio output terminal of Camcorder/Game playerand Audio input terminal of TV. (Connect the jacks to terminals in the same color.)How to WatchTurn on TV and press on remote control. Press to move Video or S-Video and press to select.For more information, read the user’s guide of Game player or Camcorder.1212Game PlayerCamcorderAudio cableVideo cable orS-Video Cable
CONNECTIONS25DVI cable (DIGITAL)How to Connect to a PCConnection MethodConnect the PC signal cable (15-pin D-sub) between the output terminal of PC and the D-sub input terminal ofTV.Connect the Audio cable between Audio output terminal of PC and Audio input terminal for PC on the rear ofTV. (Connect the jacks to terminals in the same color.)When Using as a PC MonitorTurn on TV and press on remote control.Press to move to PC or DVI and then press to select.- If you use the DVI connection, you can enjoy better picture quality.- This product supports Plug-and-Play function.- We recommend the above method if the DVD player or set top box supports DTV signal with DVI/D-sub (15 pin)cable for the better picture quality.- If you input an unsupported resolution in PC or DVI mode, the screen won’t be displayed properly. 1212D-SUB cableAudio Cableor
26CONNECTIONSHYUNDAI Vvuon Digital LCD TVResolution31.4737.8631.4737.8637.5043.2731.4737.8848.0846.8853.6749.7248.3660.0268.68Vertical frequency70.0985.0859.9472.8075.0085.0170.0860.3272.1875.0085.0674.5560.0075.0385.00640 x 350720 x 400800 x 600832 x 6241024 x 768640 x 480Horizontal frequencyResolutions Supported in PC
CONNECTIONS27How to Connect an External Visual DeviceYou can connect your TV to other visual device to watch two TV programs at the same time.Connection MethodConnect the Composite Video cable between Video input terminals of an external device and the Video outputterminals for Video on the rear of TV.(Connect the jacks to terminals in the same color.)Connect the Audio cable between Audio input terminal (Left-white, Right-red) of an external device and Audiooutput terminal for Video on the rear of TV. (Connect the jacks and terminals in the same color.)For more information, read the user’s guide of an external device.123External Visual DeviceAudio CableVideo CableVideo and Audio outputs are available only when watching an Analog TV, Digital TV or VCR. This is not supportedin the Input Mode of Component, DVI/D-SUB or S-Video.
28CONNECTIONSHYUNDAI Vvuon Digital LCD TVHow to Use Digital SoundConnection MethodConnect the coaxial cable or optical cable to the digital audio output terminal for coaxial cable or SPDIFoptical digital audio output terminal on the rear of TV.Deselect Speaker Output from the Sound Menu and select Digital Sound Output. (See page 44~45)For more information, read the user’s guide of the external sound device.Do not look into directly the beam with the optical port. Doing so may damage your eyesight.123Coaxial cableorOptical cableAmplifier with Built-in Dolby Digital AC3Digital Audio Output is available when watching a digital TV program.
PICTURE2912How to Select the Picture ModeUsers can automatically adjust the picture mode according to the input mode.How to Directly Select Picture Mode : Press MODE. button.- When the input mode is Analog TV, Digital TV, Video, S-Video, Component 1 & 2, users can select Standard Dynamic Movie Mild Custom 1/2 .- When the input mode is PC, DVI, users can select Standard Low (Character Mode) High (Movie) Custom 1/2 .- When the input mode is Memory, users can select Standard Dynamic Movie Mild.Press Menu button.Menu items appear on the screen.Press button to select “MODE” is selected.Whenever you press Left or Right button, the modechanges in following order.Standard Dynamic Movie Mild Custom 1 Custom 2 Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.STANDARD : Most video contents are appropriate to this mode. SPORT : Clear display MOVIE : When watching a movieMILD : Soft display.CUSTOM : When the user wants to directly set the values See the next page- The adjustment menu may be different depending on the input mode.- The adjustment of Contrast, Brightness, Sharpness, Color and Tint is allowed only in the Custom mode.
30PICTUREHYUNDAI Vvuon Digital LCD TVHow to Set the Desired PictureUsers can manually adjust their desired picture.Press Menu button.Menu items appear on the screen.Press button to select .Press Left or Right button to choose “Custom 1/2”.Press Left and Right buttons to move to Custom .Press button to select Custom .Picture Adjust menu items appear.Press Up and Down buttons to move.Press Left and Right buttons to adjust.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.CONTRAST : Adjust the brightness and darkness of object and background. BRIGHTNESS : Adjust the brightness of the entire picture. SHARPNESS : Adjust clarity of outline of objects.COLOR : Adjust colors into deeper or lighter colors.TINT : Adjust colors naturally.SHARPNESS, COLOR, TINT are not applied to PC and DVI modes.1234
PICTURE31How to Adjust the Color Temperature of the ScreenUsers can manually adjust their desired color temperature.Press Menu button.Menu items appear on the screen.Press button to select .Press Up and Down buttons to move to “COLOR TEMP”.Whenever you press Left or Right button, the mode changes in following order.Standard Warm 1 Warm 2 Cool 1 Cool 2 Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappearsSTANDARD : General color of the pictureCOOL 1, 2 : Cool color in the background with a bluish tintWARM 1, 2 : Warm color in the background with a reddish tint123
PICTURE32HYUNDAI Vvuon Digital LCD TVHow to Select the Aspect RatioUsers can manually adjust the size of the screen.How to Directly Select the Screen Size : Press button.The current screen size is displayed on the OSD menu.If you press the ASPECT button repeatedly, the screen size changes in following order- Under Digital TV input : Users can select Wide Normal Zoom 1 Zoom 2 Auto. - Under PC inputs : Users can select Wide Normal. - Under DVI inputs : Users can select Wide Normal Zoom 1 Zoom 2. - Under other inputs : Users can select Wide Normal Panorama Zoom 1 Zoom 2. 123Press Menu button.Menu items appear on the screen.Press button to select .Press Up and Down buttons to move to ASPECT RATIO .Whenever you press Left or Right button, the mode changes in following order.Wide General Panorama Zoom 1 Zoom 2 Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.
PICTURE33General broadcast picture is adjustedto 16:9. WIDEThe screen size automaticaly changes according to a signal source received(General broadcast 4:3, Wide broadcast 16:9) AUTO (This is applied in digital broadcasting input mode only.)4:3 general picture sizeNormal Picture size for panorama videoPanoramaPicture enlarged to 16:9 format, letterbox format.ZOOM 1Zoom in 16:9 in vertical directionZOOM 2
PICTUREHYUNDAI Vvuon Digital LCD TV34How to Watch the PIPThis function allows you to watch the PIP or TWIN mode.1234Press Menu button.Menu items appear on the screen.Press button to select .Press Up and Down buttons to move to PIP.Press Left and Right buttons to select PIP.The PIP Menu appears.Whenever you press Left or Right button, the mode changes in following order.PIP 1 PIP 2 PIP 3 TWIN 1 TWIN 2 OFF After setting Mode, go to STEP 5 if you need to set the SOURCE for Sub-picture.Continued on the next page<PIP 1> <PIP 2> <PIP 3><TWIN 1 > <TWIN 2 >
PICTURE35How to Set the INPUT for the Sub-PictureThis function is available only in the PIP mode.6587Press Up and Down buttons to move to SOURCEPress Left and Right buttons to select SOURCE .The list of sub-picture sources appears. Press Up and Down buttons to move to the sub-picture source you want.Press Press button to select source.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.You can set the PIP mode quickly using the remote control.How to Select the PIP : Press the button. Whenever you press this button, the PIP mode is selected or deselected.How to Select the Size of Sub-picture : Press the button.Whenever you press this button, the size of the Sub-picture changes.How to Select the INPUT : Press the button.Press the buttons to select the INPUT and then select .How to Switch the PIP to Sub-picture : Press the button.Whenever you press this button, the Main picture and Sub-picture are switched each other.
PICTURE36HYUNDAI Vvuon Digital LCD TVHow to Set the channel of the Sub-picture Channel : Press the button.This is applied only when the sub-picture is displayed.How to Change the Position of the Sub-picture : Press the button.Bottom Right Corner Bottom Left Corner Left Top Corner Right Top Corner Supported PIP TablePIP : O→Supported, X →Not SupportedThe same input mode cannot be selected for the main picture and sub-picture.S-VideoOOOOOOOXXVideoOOOOOOXOXAnalog TVOOOOOXOOXComponent 2XXXXXOOOXComponent 1XXXXXOOOXPCXXXXXOOOXPCDVIDTVComponent 1Component 2Analog TVVideoS-VideoMemoryDVIXXXXXOOOXDTVXXXXXOOOXMain Sub
37PICTUREHow to Reduce NoiseIn the Noise Reduction, the more you reduce the screen noise, the more the sharpness level of the picturesmay become degraded. Press Menu button.Menu items appear on the screen.Press button to select .Press Up and Down buttons to move to NOISE REDUCT .Whenever you press Left or Right button, the mode changes in following order.Weak Strong OffPress MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.123
38HYUNDAI Vvuon Digital LCD TVSOUNDHow to Select the Audio ModeUsers can adjust sound mode automatically as they want.How to Directly Select Sound Mode : Press MODE. button.Users can select Standard News Music Sport Custom .Press Menu button.Menu items appear on the screen.Press Up and Down buttons to move to .Press button to select .MODE is selected.Whenever you press Left or Right button, the mode changes in following order.Standard News Music Sport CustomPress MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.STANDARD : General sound mode. This fits most audio contents.NEWS : For enjoying clear sound. MUSIC : For enjoying original sound.SPORT : For enjoying vivid sound.CUSOTM : When the user wants to set the value. See the next page123
SOUND39How to Adjust the Desired Audio Mode Users can adjust sound mode automatically as they want.Press Menu button.Menu items appear on the screen.Press Up and Down buttons to move to .Press button to select .Press Left and Right buttons to select CUSTOM .Press Up and Down buttons to move to CUSTOM .Press Left and Right buttons to select CUSTOM .SOUND CUSTOM menu appears.Move between the items listed using UP or Down button. Adjust the level of the item selected using Left or Right button.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.VOLUME : Adjusts the volume. LOW SOUND: Adjusts the range size of low sound. HIGH SOUND: Adjusts the range size of high sound.BALANCE : Adjusts the balance of left and right speakers.12345

Navigation menu