Hyundai IBT LT40DW000 40-inch LCD TV Monitor User Manual

Hyundai IBT Corp. 40-inch LCD TV Monitor

Contents

Users Manual 2 of 2

PICTURE35How to Set the INPUT for the Sub-PictureThis function is available only in the PIP mode.6587Press Up and Down buttons to move to SOURCEPress Left and Right buttons to select SOURCE .The list of sub-picture sources appears. Press Up and Down buttons to move to the sub-picture source you want.Press Press button to select source.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.You can set the PIP mode quickly using the remote control.How to Select the PIP : Press the button. Whenever you press this button, the PIP mode is selected or deselected.How to Select the Size of Sub-picture : Press the button.Whenever you press this button, the size of the Sub-picture changes.How to Select the INPUT : Press the button.Press the buttons to select the INPUT and then select .How to Switch the PIP to Sub-picture : Press the button.Whenever you press this button, the Main picture and Sub-picture are switched each other.
PICTURE36HYUNDAI Vvuon Digital LCD TVHow to Set the channel of the Sub-picture Channel : Press the button.This is applied only when the sub-picture is displayed.How to Change the Position of the Sub-picture : Press the button.Bottom Right Corner Bottom Left Corner Left Top Corner Right Top Corner Supported PIP TablePIP : O→Supported, X →Not SupportedThe same input mode cannot be selected for the main picture and sub-picture.S-VideoOOOOOOOXXVideoOOOOOOXOXAnalog TVOOOOOXOOXComponent 2XXXXXOOOXComponent 1XXXXXOOOXPCXXXXXOOOXPCDVIDTVComponent 1Component 2Analog TVVideoS-VideoMemoryDVIXXXXXOOOXDTVXXXXXOOOXMain Sub
37PICTUREHow to Reduce NoiseIn the Noise Reduction, the more you reduce the screen noise, the more the sharpness level of the picturesmay become degraded. Press Menu button.Menu items appear on the screen.Press button to select .Press Up and Down buttons to move to NOISE REDUCT .Whenever you press Left or Right button, the mode changes in following order.Weak Strong OffPress MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.123
38HYUNDAI Vvuon Digital LCD TVSOUNDHow to Select the Audio ModeUsers can adjust sound mode automatically as they want.How to Directly Select Sound Mode : Press MODE. button.Users can select Standard News Music Sport Custom .Press Menu button.Menu items appear on the screen.Press Up and Down buttons to move to .Press button to select .MODE is selected.Whenever you press Left or Right button, the mode changes in following order.Standard News Music Sport CustomPress MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.STANDARD : General sound mode. This fits most audio contents.NEWS : For enjoying clear sound. MUSIC : For enjoying original sound.SPORT : For enjoying vivid sound.CUSOTM : When the user wants to set the value. See the next page123
SOUND39How to Adjust the Desired Audio Mode Users can adjust sound mode automatically as they want.Press Menu button.Menu items appear on the screen.Press Up and Down buttons to move to .Press button to select .Press Left and Right buttons to select CUSTOM .Press Up and Down buttons to move to CUSTOM .Press Left and Right buttons to select CUSTOM .SOUND CUSTOM menu appears.Move between the items listed using UP or Down button. Adjust the level of the item selected using Left or Right button.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.VOLUME : Adjusts the volume. LOW SOUND: Adjusts the range size of low sound. HIGH SOUND: Adjusts the range size of high sound.BALANCE : Adjusts the balance of left and right speakers.12345
SOUND40HYUNDAI Vvuon Digital LCD TVHow to Use the Automatic Volume ControlWith this Automatic Volume Level Control, everything you watch will always maintain the volume level that youdecide.Press Menu button.Menu items appear on the screen.Press Up and Down buttons to move to .Press button to select .Press Left and Right buttons to set to ON/OFF .Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.123
SOUND41How to Select MTS(Multi-Channel Sound)Depending on the particaular program being brodcast, you can select stereo, mono, or a Separate AudioProgram. (SAP audio is usually a foreign-language translation. Somtimes SAP has unrelated information likenews or weathter.)How to Directly Select MTS : Press the buttonRepeatedly to select “MONO”, “Stereo” or “SAP”.- Choose “Stereo” for channels that are broadcasting in STEREO.- Choose “MONO” for channels that are broadcasting in MONO, or if you are having difficultly receiving a STEREOsignal.- Choose “SAP” to listen to the seperate audio program, which is usually a foreign-language translation.* You can select one of the languages listed you prefer when you watch a digital program that is supported with foreignlanguage.1234Press Menu button.Menu items appear on the screen. Press Up and Down buttons to move to .Press button to select .Press Up and Down buttons to move to“MTS”.Press Left and Right buttons,Repeatedly to select “MONO”, “STEREO” or “SAP”.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.If you also press the MTS button on remote control unit under other mode than TV mode, the current settinginformation is displayed. If you press the MTS button twice, the mode shifts MONO STEREO in order.
SOUND42HYUNDAI Vvuon Digital LCD TVHow to Listen to SRS TruSurround XT (Surround)Users can enjoy spectacular 3D sound. How to Directly Select the SRS : Press the button.Whenever you press this button, the mode shifts ON OFF in order.Press Menu button.Menu items appear on the screen.Press Up and Down buttons to move to .Press button to select .Press Up and Down buttons to move to SURROUND .Press Left and Right buttons to set to ON/OFF .Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.1234The SRS TruSurround XT function is activated only when the audio input signal is Stereo.is a trademark of SRS Labs, Inc.TruSurround XT technology is incorporated underlicense from SRS Labs, Inc.
SOUND43- The frequencies in the entry are the subwoofer’s frequency range. - You make sure to use a subwoofer speaker system with built-in amplifier.How to Set the Output of SubwooferYou can set this function when you wish to install your subwoofer system.Press Menu button.Menu items appear on the screen.Press Up and Down buttons to move to .Press button to select .Press Up and Down buttons to move to “SUB WOOFER .Press Left and Right buttons to select “SUB WOOFER .SUB WOOFER menu items appear.Choose one of the items listed. Press Left and Right buttons to adjust.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.12345
SOUNDHYUNDAI Vvuon Digital LCD TV44How to Set the Audio OutputIf you wish to use an external audio system, you can turn off the TV speakers.Press Menu button.Menu items appear on the screen.Press Up and Down buttons to move to .Press button to select .Press Up and Down buttons to move to AUDIO OUTPUT .Press Left and Right buttons to select ON/OFF .Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.1234
SOUND45How to Set the Digital Audio OutputThe digital audio output terminal allows you to enjoy digital sound. (For more details, see page 28)Press Menu button.Menu items appear on the screen.Press Up and Down buttons to move to .Press button to select .Press Up and Down buttons to move to “DIGITAL AUDIO”.Press Left and Right buttons to select ON/OFF.Whenever you press Left or Right button, the mode shifts in following order.Dolby PCM OFFPress MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.1234Manufactured under license from Dolby Laboratories.“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
SOUND46HYUNDAI Vvuon Digital LCD TVHow to Set Audio LanguageWhile watching a digital program, you can listen to foreign language if the program is supported with foreignlanguage.How to Directly Select Audio Language : Press the button.Whenever you press this button, the mode shifts MONO STEREO SAP in order when receiving analog signals.You can select one of the languages listed you prefer when receiving digital signals.Press Menu button.Menu items appear on the screen.Press Up and Down buttons to move to .Press button to select .Press Up and Down buttons to move to “AUDIO LANGUAGE”.Whenever you press Left or Right button, the mode shifts in following order.KOREAN ENGLISH FRANCEPress MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.1234If you want to see language information while watching a digital channel, press the button to displaylanguage information that is currently received.
CHANNEL47How to Store Channels Automatically- Your TV can memorize and store all of the available analog/digital broadcast signals for both “off-air”(antenna) and cable channels. - Before your television can begin memorizing the available channels, make sure to specify the type of thesignal source (antenna or cable) connected to your TV.123456Press Menu button.Menu items appear on the screen.Press Up and Down buttons to move to .Press button to select .AUTO STORE is highlighted.Press button to select “AUTO STORE”. AUTO STORE menu items appear.Press Left and Right buttons to select the type of antenna connection.- In case of ATV/DTV (ANT1) :When watching both analog broadcast and digital broadcast at the same time with ANT1Press Up and Down buttons to move to AIR TV or CATV.• AIR ONLY : Watching the analog over-the-air and digital over-the-air signals via ANT1 input port.• CABLE ONLY : Watching the Cable and digital cable signals via ANT1 input port.- In case of ATV (ANT1) + DTV (ANT2) :When watching analog broadcast with ANT1 and digital broadcast with ANT2.Press Up and Down buttons to move AIR + AIR, AIR + CABLE or CABLE + AIR. • AIR(ANT1)+AIR(ANT2) : Watching the analog over-the-air via ANT1 input port and the digitalover-the-air signal via ANT2 input port.• AIR(ANT1)+CABLE(ANT2) : Watching the analog over-the-air via ANT1 input port and the digitalcable via ANT2 input port.• CABLE(ANT1)+AIR(ANT2) : Watching the analog cable via ANT1 input port and the digital over-the-air via ANT2 input port.Press Left and Right buttons to set up CABLE BAND.*CABLE BAND NOTE : STD (Standard), HRC (HRC band), IRC (IRC band)(For further band information, contact your cable service provider.)
CHANNELHYUNDAI Vvuon Digital LCD TV48How to Add/Erase Channels ManuallyUsers can add or erase the desired channels.12345Press \schannel buttons or the number buttons on remote control to view all channels that will be added or erased.Add or erase channels by pressing theADD/ERASE button. Press Left and Right buttons to set ADD/ERASE .Press Up and Down buttons to move to YES/NO .Press button to set.When you wish to restore any digital channels that have been deleted, you need to perform AUTO SCAN again.If you want to directly use the number buttons for storing, contact your local broadcasting company or cablecompany for the required channel digits. Unlike an analog broadcast, a digital broadcast uses virtual channels,not fixed channels. For more information on virtual channels, see page 65.- In the middle of AUTO SCAN, if you press button once, analog AUTO SCAN is interrupted. If you press button a second time, digital AUTO SCAN is interrupted. Press the Menu button to exit. Then the originalchannel is returned. - If you have changed the connection of an antenna or cable, perform AUTO SCAN again.Press button.AUTO SCAN is activated.7
CHANNELHow to Set Favorite ChannelsUsers can store frequently watched channels to quickly access a preferred channel.49The Favorite function is available only with remote control.- How to store the channel you are currently watching as a favorite channelPress “BOOK-MARK” button. Then the channel will be stored while Favorite Channel Selected is displayed on the screen.- How to access the stored favorite channelPress FAVORITE button. You can access the favorite channel by pressing this button repeatedly. - How to deselect a favorite channelDisplay the channel to be deleted on the screen and then press the BOOK-MARK button twice.The stored channel is deleted while Favorite ChannelDeselected is displayed on the screen.
CHANNELHYUNDAI Vvuon Digital LCD TV50How to Fine Tune Channel ReceptionIf the reception is clear, you do not have to fine tune channels, as this is done automatically during the searchand store operation. If the signal is weak or distorted, you may have to fine tune the channel manually. 12345Press Menu button.Menu items appear on the screen.Press Up and Down buttons to move to .Press button to select .Press Up and Down buttons to move to “FINE TUNE”.Press button to select “FINE TUNE”.FINE TUNE menu items appear.Press Left and Right buttons to adjust the screen.The displayed channel digit is the channel that is currently viewed.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.The selected OSD for fine tuned channels is highlighted in orange.
51CHANNELHow to the LNA (Low-Noise-Amplifier) FeatureIf the reception is clear, you don’t have to use this feature.If the signal is weak or distorted, perform the following steps.Press Menu button.Menu items appear on the screen.Press Up and Down buttons to move to .Press button to select .Press Up and Down buttons to move to “LNA”.Press Left and Right buttons to set to ON/OFF .Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.1234
52HYUNDAI Vvuon Digital LCD TVSETUPHow to Choose Your LanguageUsers can select their language preference in order to display main menus and sub menus, etc.123Press Menu button.Menu items appear on the screen.Press Up and Down buttons to move to .Press button to select .LANGUAGE is highlighted.Whenever you press Left or Right button, the mode shifts in following order.ENGLISH FRANÇAIS ESPAÑOLPress MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.
SETUP53How to Set Clock, On/Off Time, Sleep Time- You can automatically turn on or off the TV at a preset time. To do this, you must set the clock if you wish to use theautomatic on or off timers. - No Signal Timeout allows you to automatically turn off the TV if there is no broadcast signal for a certain period of time. 123456789Press Menu button.Menu items appear on the screen.Press Up and Down buttons to move to .Press button to select .Press Up and Down buttons to move to “TIME”.Press button to select “TIME”. The CLOCK items appear.- To set the Current Time :Press Left and Right buttons to move between Hour, Minute and AM/PM and Press Up and Down buttons to set Hour, Minute and AM/PM.After the setting is done, you can set WAKE UP and OFF TIMER. - To set the WAKE UP :Press Left button to exit the item andpress down arrow button to move to WAKE UP.Press button to select and press Left/Right and Up/Down buttons to move between items or set each item. - To set the OFF TIME :Press Menu button to exit and press the down arrow button to move to OFF TIME.Pres Left and Right buttons to move to the items and Press Up and Down buttons to set each item (See step 5)Continued on next page.....
SETUP54HYUNDAI Vvuon Digital LCD TVContinued from previous page.....(Set the SLEEP TIMER and NO SIGNAL TIMEOUT)How to Directly Set the SLEEP TIMER : Press button.Whenever this button, the mode shifts 30 60 90 120 240 OFF in order.11101213- To set SLEEP TIMER :Press Left button to exit and press the down arrow button to move to “SLEEP TIME”.Whenever the Left or Right button, the mode shifts in following order.30 60 90 120 240 OFF- To set NO SIGNAL TIMEOUT :Press Up and Down button to move to “AUTO OFF”. Press Left and Right button to select ON/OFF .Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.
SETUP55How to Set the Geometry in PC ModeThis function is only available in PC mode.How to Directly Adjust the Picture : Press the button.The picture will be automatically optimized for viewing.12345Press Menu button.Menu items appear on the screen.Press Up and Down buttons to move to .Press button to select .Press Up and Down buttons to move to “IMAGE ADJUST”. Press button to select “IMAGE ADJUST”. Then the IMAGE ADJUST items appear.Press Up and Down buttons to move to items you want. Press Left and Right buttons to adjust.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.H. POSITION : To adjust the horizontal position of the picture.V. POSITION : To adjust the vertical position of the picture. FREQUENCY : To eliminate the picture noise.PHASE : To eliminate the shake of picture.If the display input signal (resolution) has been changed, the picture will be automatically optimized.
SETUP56HYUNDAI Vvuon Digital LCD TVHow to Set Key LockThis function is used to prevent from using the control buttons on the front top of the TV or from connectingexternal devices to the TV. You make sure to set a PIN number to use this function.123456789Press Menu button.Menu items appear on the screen.Press Up and Down buttons to move to .Press button to select .Press Up and Down buttons to move to “LOCK”.Press button to select “LOCK”.Then the Enter PIN number window appears. The default is 4 digits (0-0-0-0).Press the numeric keys to enter your PIN number. The LOCK items appear.Press button to select “CHANGE PIN”.Then the Enter PIN number window appears.Enter a 4-digit PIN number. When the Confirm PIN number window appears, enter the PIN number again.- To set Key Lock :Press Up and Down buttons to move to “KEY LOCK”. Press Left and Right buttons to set to ON/OFF .When setting to ON, the control buttons on the front top of the TV will be engaged.Continued on next page ......
SETUP57Continued from previous page.....(Set the Lock External Signal function.)111012- To set Aux Block :Press Up and Down buttons to move to “AUX BLOCK”. Press button to select “AUX BLOCK”.Then the AUX BLOCK items appear.Press Up and Down buttons to move to the item you want. Press Left and Right buttons to set to ON/OFF .If the item is set to ON, such item is disabled.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.- The Lock External SIGNAL function is designed to prevent a VCR or game player from being connected to the TV. - If you forgot your PIN number, press the MENU + MTS + SLEEP + DISPLAY buttons on the remote control in sequence to restore the default number, 0-0-0-0. - The Key Lock function will be disengaged when you turn off and then on AC power or when a power failurehappens.
58SETUPHYUNDAI Vvuon Digital LCD TVHow To Set Block ProgramThis(V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station.The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and bythe categories chosen to be blocked.V-Chip rating and categoriesRating guidelines are provided by broadcasting stations. Most television programs and television movies can beblocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the Movie Rating System (MPAA) only.Ratings for Movies previously shown in theaters :Ratings for Television programs including made-for-TV movies :Continued on next page ......Movie Ratings : - Blocking Off (Permits all programs)- G (General audience)- PG (Parental guidance suggested)- PG-13 (Parents strongly cautioned)- R (Restricted)- NC-17 (No one 17 and under admitted)- X (Adult only)If you set PG-13 : G and PG movies will be available , PG-13, R, NC-17 and X will be blocked.- TV-G (General audience)- TV-PG (Parental guidance suggested)- TV-14 (Parents strongly cautioned)- TV-MA (Mature audience only)- TV-Y (All children)- TV-Y7 (Children 7 years older)TV Rating Children : - Age (applies to TV-Y, TV-Y7)- Fantasy Violence (applies to TV-Y7)TV Rating General : - Age (applies to TV-G, TV-PG, TV-14, TV-MA)- Dialogue-sexual dialogue (applies to TV-PG, TV-14)- U Language-adult language (applies to TV-PG, TV-14, TV-MA)- Sex-sexual situations (applies to TV-PG, TV-14, TV-MA)- Violence (applies to TV-PG, TV-14, TV-MA)
59SETUP...... Continued from previous page.123456789Press Menu button.Menu items appear on the screen. Press Up and Down buttons to move to iconand press buttons to select.The message “Enter PIN” will appear. Enter your 4-digit PIN number.The new screen will appear.Press Up and Down buttons to move to “BLOCK PROGRAM” and press buttons to select.The new screen will appear.Press Left and Right buttons to “ON”.Press Up and Down buttons to move to“TV-Guide” or “MAPP”.Press button to select “TV-Guide” or “MAPP”The new screen will appear.Press Up and Down or Left and Right buttons to choose items.Press Up and Down buttons to select“U” or “B”(U=Unblock, B=Block)Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.TV-guide menu screenMAPP menu screen
60SETUPHYUNDAI Vvuon Digital LCD TVHow to View Closed CaptionsChoices in the closed caption menu are : CC Mode, Priority (Analog caption or Digital caption), and Option.1. CC MODE :ON : Captioning information is always shown, when available. OFF : No captioning information is displayed.On mute : Captioning information is only when the TV's sound is mute, when available.(To mute the sound, press the mute button on the remote control and captioning information will appear on thescreen, if available)2. PRIORITY : You can choose whether the TV uses digital or analog captions for digital TV programs that have both or either.- ANALOG (CAPTION) : You can select a closed caption mode, which is the mode, or source, used for displayingcaptioning information for analog channels or digital channels, if available.- DIGITAL (CAPTION) : You can select a closed caption, service mode(1-7) for digital channels.The service modes support MPEG-2 based transport sources Service 1 and Service2 are theprimary and secondary languages, respectively.Service3 and service4.5.6 are additional caption sources that may be available. Continued on next page ......If you turned off the speakers in the Audio menu, closed captioning won’t appear when you press the mutebutton on the remote.• CAPTION : The form for the words that scroll across the bottom of the TV screen : usually the audio portion of the programprovided for the hearing impaired.CC 1 : For video related information that can be displayed. Script can be in any language.CC 2/3/4 : Other modes used for video related information.• TEXT : The term for the words that appear in a large black frame and almost cover the entire screen :Usually message provided by the broad caster.T 1 : Blanks out a large portion of the picture on the television screen, and display program guide or anyother information currently being transmitted.T 2/3/4 : other modes that display information and blank out a large portion of the picture of the TV screen.
61SETUP...... Continued from previous page.3. OPTION : Customized closed captioning for the digital caption by choosing the settings for the following options :123456Press Menu button.Menu items appear on the screen. Press Up and Down buttons to move to iconand press buttons to select.Press Up and Down buttons to move to “CLOSED CAPTION” and press buttons to select.Closed Caption menu appear.CC MODE is highlighted.Press Left and Right buttons to select “ON” or ON MUTE”.Sub menu items are activated.Press Up and Down buttons move between the itemsPress Left and Right buttons to select the item.When selecting the Option item, press button.Option menu appear.Press Up and Down buttons move between the itemsPress Left and Right buttons to select the item.SIZE : Set the size of the words - AUTOMATIC -> STANDARD -> LARGE -> SMALL.TEXT COLOR : Chose a color for the text - AUTOMATIC -> WHITE -> BLACK -> RED -> GREEN -> YELLOW-> MAGENTA -> AND CYAN.TEXT OPACITY : Specify the opacity for the text color - AUTOMATIC -> SOLED -> TRANSPARENT -> TRANSLUCENT.BG(BACKGROUND) COLOR : Select a background color - AUTOMATIC -> WHITE -> BLACK -> RED -> GREEN ->YELLOW -> MAGENTA -> CYAN.BG OPACITY : Specify the opacity for the background - AUTOMATIC -> SOLED -> TRANSPARENT -> TRANSLUCENT.
62DTV GUIDEHYUNDAI Vvuon Digital LCD TV123How to Use the Current Channel Guide Users can get information on broadcasting time and signal status of the current digital channels.How to Directly Use the Current Channels : Press the button.How to Reserve TV Programs Using the Total Channel Guide - Users can get the broadcasting time information of all the entire digital channels. To do this, it is required toset the current time first.- The displayed broadcasting time may be different from that provided by your local broadcasting company. Press Menu button.Menu items appear on the screen.Press Up and Down buttons to move to and press button to select.Press button again to select the “CURRENT CHANNEL Guide”.The information on broadcasting time and signal status, etc. of the channels your are currently watching will be displayed.Press Menu button.Menu items appear on the screen.Press Up and Down buttons to move toand press button to select.Press Up and Down buttons to move to “TOTAL CHANNEL GUIDE”.Press button to select “TOTAL CHANNEL GUIDE”. The broadcasting time and related information of all channels will be displayed.To schedule TV programs, go to step 4 on the next page. 21
DTV GUIDE63How to Use TV Program ReservationIf you have scheduled a TV program you are going to watch, the channel you are currently watching isautomatically switched to the scheduled channel, or when your TV is in stand-by, the scheduled TV program ison at the defined time. If the AC power is off, this function is deactivated.How to Directly Select the Entire Channel Information : Press the button.5467Continued from previous page.Press Up/Down and Left/Right buttons to move to a TV program to be scheduled. Press button.A window “Will you schedule this program?” appears.Press Left and Right buttons to move to YES ,if you want to schedule. If you don’t want to schedule,move to NO .Press button to set. If scheduled, the program title is highlighted in red and if scheduling is cancelled, the red disappears.You can check a listing of scheduled programs from the SCHEDULE LIST menu. For more details, see the next page.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.- You can schedule up to five TV programs at a time.- When a scheduled TV program starts to broadcast, the program is automatically removed from the listing.- You can schedule only TV programs on the air within 24 hours. This schedule keep updated. For example, if thecurrent time is AM 10:00, any programs you want to schedule is allowed until AM 10:00 next morning.
DTV GUIDE64HYUNDAI Vvuon Digital LCD TV78345612How to Check or Cancel a Scheduled TV ProgramUsers can look through scheduled TV programs or remove a scheduled program from a listing of scheduledprograms.Press Menu button.Menu items appear on the screen.Press Up and Down buttons to move to .Press button to select .Press Up and Down buttons to move to “RESERVATION LIST”. Press button to select “RESERVATION LIST”.The Reservation List will appear.- To remove a scheduled program :Press Up and Down buttons to the program you want to remove.Press button.A window, Will you remove this program? appears.Left and Right buttons to select YES .Press button to remove the item.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.
MEMORY MODE65Memory Card Slot 1 (MT) Memory Card Slot 2 (CF)How to Use Memory ModePlease read the following instructions carefully before use.Precautions when using a Memory CardEnsure to use a memory card labeled with the manufacturer’s name and manufacture number.Do not insert other objects such as a coin than a memory card into the memory card slot, which may cause amalfunction.Do not drop or apply a shock to memory cards.Keep a memory card in the provided case after use.Do not dismantle or modify memory cards.Avoid static electricity or electronic noise as this may damage data stored in a memory card. We cannot be liable for misuse of the TV set, any troubles during use, or other problems, or incorrect settings,except for those cases for which we are liable by law.Any damages arising out of the misuse of the TV set may result in damage to or loss of data.We are not responsible for any damaged data. To avoid this, ensure to back up an important file.This unit is designed for you to listen to personally converted MP3 files for personal use only. Also, when listeningto any copyright-protected files, ensure to use a separate MP3 player. Precautions when inserting a memory cardTurn the TV set off before connecting all necessary cables.Insert a memory card with the label facing up avoiding twisting or skewing.Insert a memory card with the label facing up and the arrow on the label pointing toward the unit. Inserting thememory in upside down may result in damage to the memory card or unit.Do not attempt to remove a memory card while it is in operation. This may cause serious damage to the memorycard or unit. Ensure to stop all memory cards before removing a memory card from the unit.Make sure the cards are completely and firmly inserted into the appropriate slots.Improperly seated cards will cause serious damage to memory cards or unit. Make sure the RSMMC, miniSD, T-FLASH, MS Duo and MS Pro Duo memory cardsare inserted into an adapter. Contact the dealer where your memory card ispurchased.Commercially available memory cards (Sold separately)- The available types of memory cards by slot are shown on the side of the TV.- The playback speeds vary depending on the memory card types. Adapter
MEMORY MODE66HYUNDAI Vvuon Digital LCD TVSupported FilesSupported Media File TypesSupported Compressed Jpeg/Image File Format Availablememory card capacityUSB HOSTUSB 1.1HOSTPowerSupplyCompactFlash : 8MB ~ 4GBMicrodrive : 1GB, 2GB, 4GB / 2.5GB, 5GBSmartMedia : 8MB ~ 128MBxD-Picture : 16MB ~ 512MB / 1GB(M-CARD)MultiMediaCard/RS MMC : 8MB ~ 1GBSecure Digital/miniSD : 8MB ~ 1GBMemory Stick/Duo : 4MB ~ 128GBMemory Stick Pro/Duo : 256MB, 512MB, 1GBUSB HDD, Flash Memory BarMP3 Player (Available only in portable disk mode)Cellular Phone (Available only in portable disk mode)Make sure to use TV USB power for USB HDD with 2.5” or less. Never useseparate power.Make sure to use separate power for 3.5” USB HDD.Using a memory card with capacitylarger than the unit is capable ofsupporting may cause an error. A very high capacity of a memory cardmay result in slow speed. Some non-supported Jpeg or MP3 filesmay not be played back. PhotoSupportSupportCompatibilityID3 tag not supported MP3i, MP3 PRO not supported CompatibilityCompatibilitySupportMovieMusicJPEG : JIFF, EXIF (.jpg)MP3DivX3, DivX4 XviD (.avi) MPEG-1 (.mpeg/.mpg) MPEG-2 (.mpeg/.mpg/.vob) MPEG-4 (.mpeg/.mpg, asf) Baseline JPEG : 5120x3840 (Max. Resolution)Progressive JPEG : 2048x1536 (Max. Resolution)DivX - 720 x 480 30fbs or less, - 720 x 576 25fbs or less- AC3 support, MPEG-1 audio layer-2 and 3 encoded files- GMC(Gobal Motion Compression), Q-Pel(Quarter Pixel) not supported.MPEG-2 - Main prolile@Main level, - 2Mbps below supportedMPEG-4 - 640 x 480 (4Mbps or less), - MPEG-4V1 : not supported- MPEG-4V2 : Simple Profile supported.Motion JPEG(.avi) - 640 x 480 15 frames/sec4:2:2, 21:11:11(Y,Cb,Cr)12:11:11(Y,Cb,Cr)4:2:022:11:11(Y,Cb,Cr)4:4:411:11:11(Y,Cb,Cr)Standard(Baseline)Compression method Color formatOImageOptimization(Progressive)OX OImageNot supportedImageOImageJPG compression Image display
MEMORY MODEUsing a Memory Card1. Insert a memory card or USB memory into Slot 1/2 or USB port.2. Press to power on.3. Press to select Memory Mode.4. Refer to icons listed below menu screen to manipulate.CAUTION !When you are going to remove the memory card, press the button on the remote control. You can go back to theinitial screen anytime to remove the memory card safely while keeping the damage to stored data to a minimum level.If you have pressed the EXIT button, you have to remove andthen insert the memory card or turn the power off and on to usethe memory card. Otherwise, a message No device willappear when selecting.Only one memory card is allowed for each slot.Shifting into Memory ModeMemory Mode allows you to play back photos, music, movies and motion pictures files that are stored in memorycards.When selecting a slot into which no memory card is inserted, a message, No device will appear.67The initial screen of the memory mode will appear.Move one of the slots you want. Memory Card Slot 1 (MT)Memory Card Slot 2 (CF)
MEMORY MODE68HYUNDAI Vvuon Digital LCD TVViewing the stored photo filesViewing full-size photos 1. Press to move a photo file you want.Press to select.To the icon menus, press the button. Manipulation buttons Current page/All pagesPreviewModeCard type/capacity1) JFIF- As decording is required when making a listing,decording time is different according to file sizes.- While the slide show is in operation, music may bepaused temporarily or corrupted according to theperformance of the memory card or USB device. 2) EXIFListed files are quickly displayed when making a listing. This is because EXIF files that have been created by a digital camera, etc. contain already listings.
MEMORY MODE69Viewing full-size photos Whenever you press from the current screen, magnifying powers are shifted in sequence 1.5X 2X 2.5X1X(original size).After zooming in a photo, press to move.Rotating a photo To rotate the photo by 90 degrees clockwise, press button. To rotate the photo by 90 degrees counterclockwise, press button.Viewing images using Slide Show1. Press to display Option Menu.2. Press to move between items and press to change.3. After setting, press buttons to move to PLAY. Press to start a slide show.Slow access may take place according to file sizes, selected effect mode and card types (MMC/MS) or due tounsupported image files. This may result in difference in time taken to display images or corrupted music sound.FAST MEDIUM SLOWRANDOM TOP->BUTTOM CENTER->LEFT/RIGHTLEFT->RIGHT (BLIND) CLOSS FADE ON OFF
MEMORY MODE70HYUNDAI Vvuon Digital LCD TVViewing the stored music filesWhen you press , the slide show function starts playing back music files according to the selected options in photo mode.Playing back music files1. Press to display Option Menu.1. Press to play back. Whenever you press , you can set Repeat 1 Repeat All Play Sequence.When you press , you can listen to music in power saving mode.ModeaMusic file name File informationManipulation buttonsSelected file/All filesArtist/File sizeFile name/Playing timeModeCard type/CapacityPlaying time Manipulation buttons
MEMORY MODE71Checking the stored movie filesYou can set to play back all files (Play Sequence) or selected file (Play One) in sequence by pressing .Playing back movie files1. Press to move to movie file you want.2. Press to select a movie file to play back.To hide the icon menus on the bottom of the screen, press .To perform Rewind or Fast Forward, press . To pause, press . To see running time, press (BROADCAST).File order/All filesPlayback modePlaying time/File creation dateFile name/Playing timeModeCard type/CapacityManipulation buttons
MEMORY MODE72HYUNDAI Vvuon Digital LCD TVChecking the stored movie filesRunning a file1. Press to move to a file you want. 2. Press to run.If you select, in Photo Mode, Music Mode or Movie Mode, one of thenon-executable files or unrecognized files stored in the memorycard, an error message, “No file in this mode” will appear. Manipulation buttonsFile order/All filesCard type/Used space/Total capacityFile name/File creation dateModeCard type/Capacity- Slow access may take place according to card types (MMC/MS). This may result in interruption of a motionpicture being played back.- When playing back a motion picture stored in a USB memory, an interruption may take place. Thisphenomenon is not because the product yields its low performance but because the transmission speed differsdepending on the USB memory types.
73APPENDIXHow to Use an External Device Using the Remote ControlWhen setting other manufacturer s product using the remote control, some of the buttons on the remote control maynot operate or different functions may be activated, or some of other manufacturer s products may not work. Someof DVD/VCR combos are allowed only either in DVD mode or VCR mode. 1. Turn on the external device you want to set. 2. Whenever you press button on the remote control, the mode shifts TVVCR DVD CATV in order.3. If the external device has been chosen, press the button and buttonat the same time for two seconds.4. Enter an appropriate 3-digit number of the manufacturer from the DVD SettingNumber Table. (If the product brand you want to set has multiple setting numbers,attempt to enter the setting numbers repeatedly until the product is turned off.)5. When the product has turned off, press the button again. (The appropriate button associated with the product will flash 3 times to show theproduct operates properly.)6. Check that the Power button works normally and then check that other functionbuttons work normally.If the Power button works normally but other function buttons do not, repeat theabove steps from the beginning.Depending on product brands or setting numbers, the power button may worknormally but other function buttons do not work.VCR Setting Number Table
74APPENDIXHYUNDAI Vvuon Digital LCD TVDVD Setting Number Table
APPENDIX75AMP Setting Number TableCATV Setting Number Table
APPENDIX76HYUNDAI Vvuon Digital LCD TVGlossary 1Component video Component video is sent through three cables: two color shade (chrominance) signalsand one brightness (luminance) signal. Component video achieves greater coloraccuracy than composite video or S-VIDEO by splitting chrominance into two separateportions.Composite video Composite video is sent through a single cable. Composite video combines the colorshade (chrominance) and brightness (luminance) information into one video signal.S-VIDEO S-VIDEO requires a single cable, which carries the brightness (luminance) and color(chrominance) signals of the picture separately. S-VIDEO provides better resolutionthan composite video, which carries the signals together.480i Provides 480 lines of resolution. Displays images using interlaced scanning, which firsttransmits all the odd lines on the TV screen and then the even lines.480p Provides 480 lines of resolution. Displays images using progressive scanning, whichtransmits each line from top to bottom.720p Provides 720 lines of resolution. Displays images using progressive scanning, whichtransmits each line from top to bottom.1080i Provides 1080 lines of resolution. Displays images using interlaced scanning, whichfirst transmits all the odd lines on the TV screen and then the even lines. 1080i is oneof the formats used by HDTV (High Definition TV).Digital television (DTV) A new technology for transmitting and receiving broadcast television signals. DTVprovides higher resolution and improved sound quality over analog television.HDTV(High Definition TV) HDTV is a new kind of digital TV, creating a high quality picture, high definition. TheHDTV provides a theater-like screen with an aspect ratio of 16:9. Supports 720p orhigher.SDTV(Standard Definition TV) SDTV is a new kind of standard definition digital TV, having a range of lower resolutionthan the HDTV. Supports 480i.Cable Broadcast Receiver A device that receives cable broadcasting. Connecting it to your TV set allows you towatch a various channels. (Converter)Satellite Broadcasting Provides crisp picture and clear audio quality throughout the country via a satellite. VHF/UHF VHF (Very High Frequency) is the part of the frequency spectrum from 30 to 300megahertz. UHF (Ultra High Frequency) is the part of the frequency spectrum from 300to 3,000 megahertz.
Glossary 2APPENDIX77DVD DVD (Digital Versatile Disc) is an optical disc that can store a huge volume ofmultimedia such as video, game, and audio application, etc.Coaxial Cable Coaxial cable is the kind of rounded copper cable, which is generally used for TVantenna.LNA (Low-Noise-Amplifier) Satellite applied technology. It is capable of amplifying weak signals so that any areaexperiencing a signal interruption may enjoy a clearer picture quality.Aspect ratio Refers to the ratio between the width and height of the screen. This TV has a 16:9(widescreen) aspect ratio, as opposed to a 4:3 aspect ratio.PIP (Simultaneous Screen) PIP allows you to view two images at the same time in a single screen.SWAP PIP function provides a main picture (larger image) and sub-picture (smaller image).The SWAP is designed to swap the sub-picture for the main picture. For example,while you are watching a main picture on TV and watching a sub-picture on VCR, youcan instantly switch the two pictures by using the SWAP function.Picture Mode Picture Mode features the optimal picture quality. There are Standard-Dynamic-Movie-Mild- Custom features in order. “CUSTOM” allows you to adjust Contrast, Brightness,Sharpness, Color and Tint.Sound Mode Sound Mode features the optimal sound quality. There are Standard-News-Music-Sports- Custom features in order. “CUSTOM” allows you to adjust high frequencysound, middle frequency sound and low frequency sound.Digital Broadcasting Video and Audio signals digitized and transmitted by broadcasting companiescomplying with the new digital television standard developed by the ATSC (AdvancedTelevision System Committee). Digital Broadcasting technology provides multimediaservices including a variety of additional services as well as high-definition qualitypicture.Analog Broadcasting ATSC-based Video and Audio signals transmitted by broadcasting companies.SRS TruSurround TX A well-recognized 3D sound technology developed by US SRS Labs, Inc.This technology delivers the ultimate audio experience only with two speakers as ifthrough multi-channel speakers.Dolby Digital Formerly known as AC-3, Dolby Digital is a digital audio coding technique that reducesthe amount of data needed to produce high quality sound.
Glossary 3APPENDIX78HYUNDAI Vvuon Digital LCD TVSubwoofer Designed to improve ultra low frequency with about 150Hz. There are active type thatis built with a built-in amplifier and passive type that is required to connect anadditional amplifier to it.Mono Audio signals are produced through a single channel. It is difficult to experience aspectacular sound since audio signals are reproduced with a single speaker.Stereo Audio signals are produced through two channels. A spectacular sound is reproducedwith two separated speakers.Widescreen Term given to picture displays with a wider aspect ratio than NTSC 4:3. Digital HDTV is16:9 widescreen. Most motion pictures also have a widescreen aspect ratio, someeven wider than 16:9.Panorama screen Refers to a screen whose distortion due to the screen size has been calibrated.External source Refers source signals that come from other external devices such as a VCR, camcorderand DVD player, etc. than a TV set. MTS A bilingual service provided when an overseas film, foreign drama or overseas news,etc. is aired. You can select one of two choices: mother tongue and foreign language.Or you can listen to both languages at the same time. DVI Digital Visual Interface is a specification for digital signals. This interface using TMDStransmission reduces the loss of signal, allowing to enjoy a clear and crisp image. Virtual channels For terrestrial reception of digital signals, virtual channels are used. A virtual channelallows users to use channel digits, regardless of their area, allocated to eachbroadcasting station. To receive digital signals, you have to automatically tune channels or in case of off-air,you have to directly select UHF channel digits aired by individual stations or in case ofcable broadcasting, you have to directly select channel digits allocated by local cablestations. For example, the UHF 14 (MBC), 15 (KBS1), 16 (SBS), 17 (KBS2), and 18 (EBS)transmitted from Kwanak Mountain are indicated with virtual channels, 11-1 (MBC), 9-1 (KBS1), 6- 1 (SBS), 7-1 (KBS2), and 10-1 (EBS), which will be used by you. Thesevirtual channels are all used in the same way nationwide but the channel digits may bedifferent depending on local stations. Since the digital channels may be allocateddifferently according to areas or changed by the broadcasting policy, contact your localbroadcasting stations and cable companies for more details. Once virtual channels have been memorized, you can watch virtual channels bypressing channel numbers.
APPENDIX79Troubleshooting Installation ProblemsPicture ProblemsSymptomHow can I install anantenna?TV screen is not clear afterinstalling an indoorsantenna.How can I view cablebroadcasting?SymptomNeither picture nor sound comes up. Picture turns on slowly after power is on.Picture is distorted or frozenwhile watching digitalbroadcasting.Input Source informationonly appears on blackscreen.Poor reception on somechannels.Black and white on somechannels.TV won’t turn on.Screen is too bright or toodark.Possible solutionRefer to pages 19~20.Indoors antenna may experience poor reception due to surrounding buildings. Pleaseinstall an outdoors antenna or wireless antenna. Please install a cable broadcasting receiver (Converter).Possible solutionCheck whether power is on.Check whether the power is cut or whether power cord is properly connected.Try to plug another product’s power cord to the outlet the PDP is plugged into.This symptom is not a malfunction. This delay is designed to prevent the distorted andnoisy picture when power is on. However, if the picture does not appear more than 5minutes after power is on, call a service center. This symptom may be caused by weak reception. Contact your local station or cablecompany.Check whether your TV is properly connected to external devices.Check whether you selected proper channels. Try re-orienting your antenna. EnsureLNA is activated.Check other channels for black and white screen. Adjust colour.Ensure the power cord is plugged.Adjust brightness.
APPENDIX80HYUNDAI Vvuon Digital LCD TVSound ProblemsGeneralAuto On does not work.After setting the time, I turned TV off and turn it on.The programmed informationhas been erased.SymptomToo much noise occurs.No sound while viewing acable channelPicture is OK but sound doesnot come out. One of the speakers does notproduce sound.SymptomRemote control won't work.Where does the S-Videocable plug in for audiooutput?Strange noises are heard.I tried to use the TV screenas a PC monitor but it doesn’t work.Ensure to use the remote control or power button on the product to turn off your TV. Ifyou unplug the power cord, the stand-by consumption power becomes 0 (zero), whichcauses the programmed time to be erased.Ensure to use the remote control or power button on the product to turn off your TV. Ifyou unplug the power cord, the stand-by consumption power becomes 0 (zero), whichcauses the programmed time to be erased.Possible solutionCheck whether the audio setting is in the Stereo mode. In the Stereo mode, the soundmay be distorted in the area where experiences poor reception or is located far awayfrom a TV broadcasting station. Make sure an audio or audio/video component is securely inserted into the appropriatejacks. Check other channels for sound. Check the volume settings on the cablebroadcasting receiver. Try to press volume up/volume down buttons of your remote control.Select sound balance and make proper adjustment. (Page 39)Check the speaker connection cables. Possible solutionCheck whether there is a blocking object between the remote control and PDP.Make sure your PDP is Power On. (In case of normal, LED on the front panel is in Red.)Check whether batteries are inserted with proper polarities(+, -).When the batteries are worn out, replace with new ones.Connect the two Audio jacks from the S-Video cable to the left and right ports on theComposite.Ticking noise during or after watching is caused by the change of ambientenvironment such as humidity and temperature, which is characterized by plasticproducts. Strange ticking noise occurs because a signal is suddenly transmitted to thePDP panel. So, this is not a malfunction.Adjust the resolution referring to the standard signal mode table. Check thespecification of your video card installed in your PC. If your video card does not work insupported hardware. Try upgrading the video card’s driver.
APPENDIX81Care and CleaningCabinet Cleaning Wipe a soft dry cloth. Do not use inflammables like Benzene or Thinner, or wet clothes. Do not scratch the panel of PDP with a fingernail or pointed object. Screen Cleaning Clean the screen with a soft cloth moistened in mild glassdetergent and dry with a soft cloth.Never use any solvent on the screen such as Acetone, Benzene, orThinner, etc.Cleaning InsideWhen the inside needs to be cleaned, contact a service center ordistribution agent where the item is purchased. It is recommended cleaning is complete before the rainy season.
APPENDIXHYUNDAI Vvuon Digital LCD TV82Product Specifications- The above specifications may be subject to change without prior notice.Q3201EA (A/V audio common)1EA (Audio included) 2EA (Audio included)2EA (ANT1+ANT2)D-SUB1024 X 768 @ 85 HzL/R1EASlot 1, Slot 2, USB1EA1EA (Audio included)NTSC MFMComponent, S-Video,Composite, PC, DVIAC 100 - 240 V, 50/60 Hz Typical 150W Typical 2W772 x 230 x 56319.3 Kg Remote control, Key controlQ4001EA (A/V audio common)1EA (Audio included) 2EA (Audio included)2EA (ANT1+ANT2)D-SUB1024 X 768 @ 85 HzL/R1EANo1EA1EA (Audio included)NTSC MFMComponent, S-Video,Composite, PC, DVIAC 100 - 240 V, 50/60 Hz Typical 245W Typical 2W 988x 715.5x29723 Kg Remote control, Key controlS-VideoVideo (RCA) Component(Y/Cb/Cr)AntennaPC Connection jackMax. resolution AudioDVI-HDCPMemory SlotSubwooferVideoColor systemSound systemVideo systemSupplyConsumption powerStand-by powerModelInputOutputTV/VideoPowerDimension(W x D x H mm - Stand included) Weigh (Stand included)Control typeQ2611EA (A/V audio common)1EA (Audio included) 2EA (Audio included)2EA (ANT1+ANT2)D-SUB1024 X 768 @ 85 HzL/R1EANo1EA1EA (Audio included)NTSC MFMComponent, S-Video,Composite, PC, DVIAC 100 - 240 V, 50/60 Hz Typical 120W Typical 2W640 x 230 x 48517.5 Kg Remote control, Key control
P/N 632 0239 201 Rev.00USAAVC Tech777 Mark St., Wood Dale, IL 60191Tel : 800-568-0060 or 630-595-0123Fax : 800-784-9422 or 630-595-2345e-mail : service@hyundaimonitor.com NEW ZEALANDTRANSTECH DISTRIBUTORS Ltd.PO Box 12985 Penrose,Auckland New ZealandTel : 09-571-0775Fax : 09-571-0776e-mail : LouisG@Transtech.co.nzWWW : www.transtech.co.nzAUSTRALIAThomas Electronics Australia Pty Ltd.3 Sheridan CloseMilperra NSW 2214, AustraliaTel : +61 2 9773 7400Fax : 61 2 9773 7177Attn : Ms. Shiely PonimanGERMANYHyundai ImageQuest Europe GmbHGeheimrat Hummel Platz 265239, Hochheim, GermanyTel : 06146 / 904 444Fax : 06146 / 904 410e-mail : service@hyundaiq.deWWW : www.hyundaiq.comJAPANHyundai ImageQuest JAPANShin-Hibiya Bldg, East 5F 1-3-6Uchisaiwai-Cho, Chiyoda-ku,Tokyo, Japan 100-0011Tel : 03-5157-2286Fax : 03-5157-2284e-mail : pjkim@iqt.co.krC/S P.J.Kim

Navigation menu