Hyundai IBT LT40DW000 40-inch LCD TV Monitor User Manual
Hyundai IBT Corp. 40-inch LCD TV Monitor
Contents
- 1. Users Manual 1 of 2
- 2. Users Manual 2 of 2
Users Manual 2 of 2
How to Set the INPUT for the Sub-Picture This function is available only in the PIP mode. PICTURE Press Up and Down buttons to move to SOURCE Press Left and Right buttons to select SOURCE . The list of sub-picture sources appears. Press Up and Down buttons to move to the sub-picture source you want. Press Press button to select source. Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. You can set the PIP mode quickly using the remote control. How to Select the PIP : Press the button. Whenever you press this button, the PIP mode is selected or deselected. How to Select the Size of Sub-picture : Press the button. Whenever you press this button, the size of the Sub-picture changes. How to Select the INPUT : Press the Press the button. buttons to select the INPUT and then select How to Switch the PIP to Sub-picture : Press the button. Whenever you press this button, the Main picture and Sub-picture are switched each other. 35 HYUNDAI Vvuon Digital LCD TV button. How to Set the channel of the Sub-picture Channel : Press the This is applied only when the sub-picture is displayed. button. How to Change the Position of the Sub-picture : Press the Bottom Right Corner Bottom Left Corner Left Top Corner Right Top Corner The same input mode cannot be selected for the main picture and sub-picture. PICTURE Supported PIP Table PIP : O → Supported, X → Not Supported Sub PC DVI DTV PC DVI DTV Component 1 Component 2 Analog TV Component 1 Component 2 Analog TV Video S-Video Video S-Video Memory Main 36 How to Reduce Noise Press Menu button. Menu items appear on the screen. PICTURE Press button to select Press Up and Down buttons to move to NOISE REDUCT . Whenever you press Left or Right button, the mode changes in following order. Weak Strong Off Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. In the Noise Reduction, the more you reduce the screen noise, the more the sharpness level of the pictures may become degraded. 37 HYUNDAI Vvuon Digital LCD TV How to Select the Audio Mode Users can adjust sound mode automatically as they want. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to Press button to select MODE is selected. SOUND Whenever you press Left or Right button, the mode changes in following order. Standard News Music Sport Custom Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. STANDARD : General sound mode. This fits most audio contents. NEWS : For enjoying clear sound. MUSIC : For enjoying original sound. SPORT : For enjoying vivid sound. CUSOTM : When the user wants to set the value. How to Directly Select Sound Mode : Users can select Standard News See the next page Press MODE. button. Music Sport Custom . 38 How to Adjust the Desired Audio Mode Users can adjust sound mode automatically as they want. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to Press button to select SOUND Press Left and Right buttons to select CUSTOM . Press Up and Down buttons to move to CUSTOM . Press Left and Right buttons to select CUSTOM . SOUND CUSTOM menu appears. Move between the items listed using UP or Down button. Adjust the level of the item selected using Left or Right button. Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. VOLUME : Adjusts the volume. LOW SOUND: Adjusts the range size of low sound. HIGH SOUND: Adjusts the range size of high sound. BALANCE : Adjusts the balance of left and right speakers. 39 HYUNDAI Vvuon Digital LCD TV How to Use the Automatic Volume Control With this Automatic Volume Level Control, everything you watch will always maintain the volume level that you decide. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to Press Press Left and Right buttons to set to ON/OFF . button to select SOUND Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. 40 How to Select MTS(Multi-Channel Sound) Depending on the particaular program being brodcast, you can select stereo, mono, or a Separate Audio Program. (SAP audio is usually a foreign-language translation. Somtimes SAP has unrelated information like news or weathter.) SOUND Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to Press Press Up and Down buttons to move to “MTS”. Press Left and Right buttons, Repeatedly to select “MONO”, “STEREO” or “SAP”. button to select Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. How to Directly Select MTS : Press the button Repeatedly to select “MONO”, “Stereo” or “SAP”. - Choose “Stereo” for channels that are broadcasting in STEREO. - Choose “MONO” for channels that are broadcasting in MONO, or if you are having difficultly receiving a STEREO signal. - Choose “SAP” to listen to the seperate audio program, which is usually a foreign-language translation. * You can select one of the languages listed you prefer when you watch a digital program that is supported with foreign language. If you also press the MTS button on remote control unit under other mode than TV mode, the current setting information is displayed. If you press the MTS button twice, the mode shifts MONO STEREO in order. 41 HYUNDAI Vvuon Digital LCD TV How to Listen to SRS TruSurround XT (Surround) Users can enjoy spectacular 3D sound. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to Press Press Up and Down buttons to move to SURROUND . Press Left and Right buttons to set to ON/OFF . button to select SOUND Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. How to Directly Select the SRS : Press the Whenever you press this button, the mode shifts button. ON OFF in order. The SRS TruSurround XT function is activated only when the audio input signal is Stereo. 42 How to Set the Output of Subwoofer You can set this function when you wish to install your subwoofer system. SOUND Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to Press Press Up and Down buttons to move to “SUB WOOFER . Press Left and Right buttons to select “SUB WOOFER . SUB WOOFER menu items appear. Choose one of the items listed. Press Left and Right buttons to adjust. button to select Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. - The frequencies in the entry are the subwoofer’s frequency range. - You make sure to use a subwoofer speaker system with built-in amplifier. 43 HYUNDAI Vvuon Digital LCD TV How to Set the Audio Output If you wish to use an external audio system, you can turn off the TV speakers. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to Press Press Up and Down buttons to move to AUDIO OUTPUT . Press Left and Right buttons to select ON/OFF . button to select SOUND Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. 44 How to Set the Digital Audio Output The digital audio output terminal allows you to enjoy digital sound. (For more details, see page 28) SOUND Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to Press Press Up and Down buttons to move to “DIGITAL AUDIO”. Press Left and Right buttons to select ON/OFF. Whenever you press Left or Right button, the mode shifts in following order. Dolby PCM OFF button to select Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. 45 HYUNDAI Vvuon Digital LCD TV How to Set Audio Language While watching a digital program, you can listen to foreign language if the program is supported with foreign language. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to Press Press Up and Down buttons to move to “AUDIO LANGUAGE”. Whenever you press Left or Right button, the mode shifts in following order. KOREAN ENGLISH FRANCE button to select SOUND Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. How to Directly Select Audio Language : Press the button. Whenever you press this button, the mode shifts MONO STEREO SAP in order when receiving analog signals. You can select one of the languages listed you prefer when receiving digital signals. If you want to see language information while watching a digital channel, press the language information that is currently received. button to display 46 How to Store Channels Automatically - Your TV can memorize and store all of the available analog/digital broadcast signals for both “off-air” (antenna) and cable channels. - Before your television can begin memorizing the available channels, make sure to specify the type of the signal source (antenna or cable) connected to your TV. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to Press button to select CHANNEL AUTO STORE is highlighted. Press button to select “AUTO STORE”. AUTO STORE menu items appear. Press Left and Right buttons to select the type of antenna connection. - In case of ATV/DTV (ANT1) : When watching both analog broadcast and digital broadcast at the same time with ANT1 Press Up and Down buttons to move to AIR TV or CATV. • AIR ONLY : Watching the analog over-the-air and digital over-the-air signals via ANT1 input port. • CABLE ONLY : Watching the Cable and digital cable signals via ANT1 input port. - In case of ATV (ANT1) + DTV (ANT2) : When watching analog broadcast with ANT1 and digital broadcast with ANT2. Press Up and Down buttons to move AIR + AIR, AIR + CABLE or CABLE + AIR. • AIR(ANT1)+AIR(ANT2) : Watching the analog over-the-air via ANT1 input port and the digital over-the-air signal via ANT2 input port. • AIR(ANT1)+CABLE(ANT2) : Watching the analog over-the-air via ANT1 input port and the digital cable via ANT2 input port. • CABLE(ANT1)+AIR(ANT2) : Watching the analog cable via ANT1 input port and the digital overthe-air via ANT2 input port. 47 Press Left and Right buttons to set up CABLE BAND. *CABLE BAND NOTE : STD (Standard), HRC (HRC band), IRC (IRC band) (For further band information, contact your cable service provider.) HYUNDAI Vvuon Digital LCD TV Press button. AUTO SCAN is activated. - In the middle of AUTO SCAN, if you press button once, analog AUTO SCAN is interrupted. If you press button a second time, digital AUTO SCAN is interrupted. Press the Menu button to exit. Then the original channel is returned. - If you have changed the connection of an antenna or cable, perform AUTO SCAN again. How to Add/Erase Channels Manually Users can add or erase the desired channels. Add or erase channels by pressing the ADD/ERASE button. Press Left and Right buttons to set ADD/ERASE . Press Up and Down buttons to move to YES/NO . Press CHANNEL Press \ schannel buttons or the number buttons on remote control to view all channels that will be added or erased. button to set. When you wish to restore any digital channels that have been deleted, you need to perform AUTO SCAN again. If you want to directly use the number buttons for storing, contact your local broadcasting company or cable company for the required channel digits. Unlike an analog broadcast, a digital broadcast uses virtual channels, not fixed channels. For more information on virtual channels, see page 65. 48 How to Set Favorite Channels Users can store frequently watched channels to quickly access a preferred channel. - How to store the channel you are currently watching as a favorite channel Press “BOOK-MARK” button. Then the channel will be stored while Favorite Channel Selected is displayed on the screen. - How to access the stored favorite channel CHANNEL Press FAVORITE button. You can access the favorite channel by pressing this button repeatedly. - How to deselect a favorite channel Display the channel to be deleted on the screen and then press the BOOK-MARK button twice. The stored channel is deleted while Favorite Channel Deselected is displayed on the screen. The Favorite function is available only with remote control. 49 HYUNDAI Vvuon Digital LCD TV How to Fine Tune Channel Reception If the reception is clear, you do not have to fine tune channels, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to Press Press Up and Down buttons to move to “FINE TUNE”. Press button to select “FINE TUNE”. FINE TUNE menu items appear. Press Left and Right buttons to adjust the screen. The displayed channel digit is the channel that is currently viewed. button to select CHANNEL Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. The selected OSD for fine tuned channels is highlighted in orange. 50 How to the LNA (Low-Noise-Amplifier) Feature If the reception is clear, you don’t have to use this feature. If the signal is weak or distorted, perform the following steps. CHANNEL Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to Press Press Up and Down buttons to move to “LNA”. Press Left and Right buttons to set to ON/OFF . button to select Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. 51 HYUNDAI Vvuon Digital LCD TV How to Choose Your Language Users can select their language preference in order to display main menus and sub menus, etc. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to Press button to select LANGUAGE is highlighted. Whenever you press Left or Right button, the mode shifts in following order. ENGLISH FRANÇAIS ESPAÑOL Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. SETUP 52 How to Set Clock, On/Off Time, Sleep Time - You can automatically turn on or off the TV at a preset time. To do this, you must set the clock if you wish to use the automatic on or off timers. - No Signal Timeout allows you to automatically turn off the TV if there is no broadcast signal for a certain period of time. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to Press Press Up and Down buttons to move to “TIME”. Press button to select “TIME”. The CLOCK items appear. SETUP button to select - To set the Current Time : Press Left and Right buttons to move between Hour, Minute and AM/PM and Press Up and Down buttons to set Hour, Minute and AM/PM. After the setting is done, you can set WAKE UP and OFF TIMER. - To set the WAKE UP : Press Left button to exit the item and press down arrow button to move to WAKE UP. Press button to select and press Left/Right and Up/Down buttons to move between items or set each item. - To set the OFF TIME : Press Menu button to exit and press the down arrow button to move to OFF TIME. Pres Left and Right buttons to move to the items and Press Up and Down buttons to set each item (See step 5) Continued on next page..... 53 HYUNDAI Vvuon Digital LCD TV Continued from previous page..... (Set the SLEEP TIMER and NO SIGNAL TIMEOUT) 10 - To set SLEEP TIMER : Press Left button to exit and press the down arrow button to move to “SLEEP TIME”. 11 Whenever the Left or Right button, the mode shifts in following order. 30 60 90 120 240 12 - To set NO SIGNAL TIMEOUT : Press Up and Down button to move to “AUTO OFF”. 13 Press Left and Right button to select ON/OFF . OFF Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. Whenever this button, the mode shifts 30 SETUP How to Directly Set the SLEEP TIMER : Press button. 60 90 120 240 OFF in order. 54 How to Set the Geometry in PC Mode This function is only available in PC mode. SETUP Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to Press Press Up and Down buttons to move to “IMAGE ADJUST”. Press button to select “IMAGE ADJUST”. Then the IMAGE ADJUST items appear. Press Up and Down buttons to move to items you want. Press Left and Right buttons to adjust. button to select Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. H. POSITION : To adjust the horizontal position of the picture. V. POSITION : To adjust the vertical position of the picture. FREQUENCY : To eliminate the picture noise. PHASE : To eliminate the shake of picture. How to Directly Adjust the Picture : Press the button. The picture will be automatically optimized for viewing. If the display input signal (resolution) has been changed, the picture will be automatically optimized. 55 HYUNDAI Vvuon Digital LCD TV How to Set Key Lock This function is used to prevent from using the control buttons on the front top of the TV or from connecting external devices to the TV. You make sure to set a PIN number to use this function. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to Press Press Up and Down buttons to move to “LOCK”. Press button to select “LOCK”. Then the Enter PIN number window appears. The default is 4 digits (0-0-0-0). Press the numeric keys to enter your PIN number. The LOCK items appear. SETUP button to select Press button to select “CHANGE PIN”. Then the Enter PIN number window appears. Enter a 4-digit PIN number. When the Confirm PIN number window appears, enter the PIN number again. - To set Key Lock : Press Up and Down buttons to move to “KEY LOCK”. Press Left and Right buttons to set to ON/OFF . When setting to ON, the control buttons on the front top of the TV will be engaged. Continued on next page ...... 56 Continued from previous page..... (Set the Lock External Signal function.) 10 - To set Aux Block : Press Up and Down buttons to move to “AUX BLOCK”. 11 Press button to select “AUX BLOCK”. Then the AUX BLOCK items appear. 12 Press Up and Down buttons to move to the item you want. Press Left and Right buttons to set to ON/OFF . If the item is set to ON, such item is disabled. SETUP Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. - The Lock External SIGNAL function is designed to prevent a VCR or game player from being connected to the TV. - If you forgot your PIN number, press the MENU + MTS + SLEEP + DISPLAY buttons on the remote control in sequence to restore the default number, 0-0-0-0. - The Key Lock function will be disengaged when you turn off and then on AC power or when a power failure happens. 57 HYUNDAI Vvuon Digital LCD TV How To Set Block Program This(V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen to be blocked. V-Chip rating and categories Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-tovideo movies use the Movie Rating System (MPAA) only. Ratings for Movies previously shown in theaters : Movie Ratings : - Blocking Off (Permits all programs) -G (General audience) - PG (Parental guidance suggested) - PG-13 (Parents strongly cautioned) -R (Restricted) - NC-17 (No one 17 and under admitted) -X (Adult only) If you set PG-13 : G and PG movies will be available , PG-13, R, NC-17 and X will be blocked. Ratings for Television programs including made-for-TV movies : (General audience) (Parental guidance suggested) (Parents strongly cautioned) (Mature audience only) (All children) (Children 7 years older) TV Rating Children : - Age - Fantasy Violence SETUP - TV-G - TV-PG - TV-14 - TV-MA - TV-Y - TV-Y7 (applies to TV-Y, TV-Y7) (applies to TV-Y7) TV Rating General : - Age - Dialogue-sexual dialogue - U Language-adult language - Sex-sexual situations - Violence (applies to TV-G, TV-PG, TV-14, TV-MA) (applies to TV-PG, TV-14) (applies to TV-PG, TV-14, TV-MA) (applies to TV-PG, TV-14, TV-MA) (applies to TV-PG, TV-14, TV-MA) Continued on next page ...... 58 SETUP ...... Continued from previous page. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to and press buttons to select. The message “Enter PIN” will appear. Enter your 4-digit PIN number. The new screen will appear. Press Up and Down buttons to move to “BLOCK PROGRAM” and press buttons to select. The new screen will appear. Press Left and Right buttons to “ON”. Press Up and Down buttons to move to “TV-Guide” or “MAPP”. Press button to select “TV-Guide” or “MAPP” The new screen will appear. Press Up and Down or Left and Right buttons to choose items. Press Up and Down buttons to select “U” or “B” (U=Unblock, B=Block) icon Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. 59 TV-guide menu screen MAPP menu screen HYUNDAI Vvuon Digital LCD TV How to View Closed Captions Choices in the closed caption menu are : CC Mode, Priority (Analog caption or Digital caption), and Option. 1. CC MODE : ON : Captioning information is always shown, when available. OFF : No captioning information is displayed. On mute : Captioning information is only when the TV's sound is mute, when available. (To mute the sound, press the mute button on the remote control and captioning information will appear on the screen, if available) If you turned off the speakers in the Audio menu, closed captioning won’t appear when you press the mute button on the remote. 2. PRIORITY : You can choose whether the TV uses digital or analog captions for digital TV programs that have both or either. - ANALOG (CAPTION) : You can select a closed caption mode, which is the mode, or source, used for displaying captioning information for analog channels or digital channels, if available. • CAPTION : The form for the words that scroll across the bottom of the TV screen : usually the audio portion of the program provided for the hearing impaired. SETUP CC 1 : For video related information that can be displayed. Script can be in any language. CC 2/3/4 : Other modes used for video related information. • TEXT : The term for the words that appear in a large black frame and almost cover the entire screen : Usually message provided by the broad caster. T1 : Blanks out a large portion of the picture on the television screen, and display program guide or any other information currently being transmitted. T 2/3/4 : other modes that display information and blank out a large portion of the picture of the TV screen. - DIGITAL (CAPTION) : You can select a closed caption, service mode(1-7) for digital channels. The service modes support MPEG-2 based transport sources Service 1 and Service2 are the primary and secondary languages, respectively. Service3 and service4.5.6 are additional caption sources that may be available. Continued on next page ...... 60 ...... Continued from previous page. 3. OPTION : Customized closed captioning for the digital caption by choosing the settings for the following options : SIZE : Set the size of the words - AUTOMATIC -> STANDARD -> LARGE -> SMALL. TEXT COLOR : Chose a color for the text - AUTOMATIC -> WHITE -> BLACK -> RED -> GREEN -> YELLOW -> MAGENTA -> AND CYAN. TEXT OPACITY : Specify the opacity for the text color - AUTOMATIC -> SOLED -> TRANSPARENT -> TRANSLUCENT. BG(BACKGROUND) COLOR : Select a background color - AUTOMATIC -> WHITE -> BLACK -> RED -> GREEN -> YELLOW -> MAGENTA -> CYAN. BG OPACITY : Specify the opacity for the background - AUTOMATIC -> SOLED -> TRANSPARENT -> TRANSLUCENT. SETUP Press Menu button. Menu items appear on the screen. 61 Press Up and Down buttons to move to and press buttons to select. icon Press Up and Down buttons to move to “CLOSED CAPTION” and press buttons to select. Closed Caption menu appear. CC MODE is highlighted. Press Left and Right buttons to select “ON” or ON MUTE”. Sub menu items are activated. Press Up and Down buttons move between the items Press Left and Right buttons to select the item. When selecting the Option item, press Option menu appear. Press Up and Down buttons move between the items Press Left and Right buttons to select the item. button. HYUNDAI Vvuon Digital LCD TV How to Use the Current Channel Guide Users can get information on broadcasting time and signal status of the current digital channels. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to and press button to select. Press button again to select the “CURRENT CHANNEL Guide”. The information on broadcasting time and signal status, etc. of the channels your are currently watching will be displayed. How to Directly Use the Current Channels : Press the button. How to Reserve TV Programs Using the Total Channel Guide - Users can get the broadcasting time information of all the entire digital channels. To do this, it is required to set the current time first. - The displayed broadcasting time may be different from that provided by your local broadcasting company. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to and press button to select. Press Up and Down buttons to move to “TOTAL CHANNEL GUIDE”. Press button to select “TOTAL CHANNEL GUIDE”. The broadcasting time and related information of all channels will be displayed. DTV GUIDE To schedule TV programs, go to step 4 on the next page. 62 How to Use TV Program Reservation If you have scheduled a TV program you are going to watch, the channel you are currently watching is automatically switched to the scheduled channel, or when your TV is in stand-by, the scheduled TV program is on at the defined time. If the AC power is off, this function is deactivated. Continued from previous page. Press Up/Down and Left/Right buttons to move to a TV program to be scheduled. Press button. A window “Will you schedule this program?” appears. Press Left and Right buttons to move to YES , if you want to schedule. If you don’t want to schedule, move to NO . Press button to set. If scheduled, the program title is highlighted in red and if scheduling is cancelled, the red disappears. You can check a listing of scheduled programs from the SCHEDULE LIST menu. For more details, see the next page. DTV GUIDE Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. How to Directly Select the Entire Channel Information : Press the button. - You can schedule up to five TV programs at a time. - When a scheduled TV program starts to broadcast, the program is automatically removed from the listing. - You can schedule only TV programs on the air within 24 hours. This schedule keep updated. For example, if the current time is AM 10:00, any programs you want to schedule is allowed until AM 10:00 next morning. 63 HYUNDAI Vvuon Digital LCD TV How to Check or Cancel a Scheduled TV Program Users can look through scheduled TV programs or remove a scheduled program from a listing of scheduled programs. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to Press Press Up and Down buttons to move to “RESERVATION LIST”. Press button to select “RESERVATION LIST”. The Reservation List will appear. - To remove a scheduled program : Press Up and Down buttons to the program you want to remove. Press button. A window, Will you remove this program? appears. Left and Right buttons to select YES . Press button to select DTV GUIDE button to remove the item. Press MENU button after the setting is done, and Menu goes to the previous menu. If the EXIT button is pressed, the menu disappears. 64 How to Use Memory Mode Please read the following instructions carefully before use. Precautions when using a Memory Card Ensure to use a memory card labeled with the manufacturer’s name and manufacture number. Do not insert other objects such as a coin than a memory card into the memory card slot, which may cause a malfunction. Do not drop or apply a shock to memory cards. Keep a memory card in the provided case after use. Do not dismantle or modify memory cards. Avoid static electricity or electronic noise as this may damage data stored in a memory card. We cannot be liable for misuse of the TV set, any troubles during use, or other problems, or incorrect settings, except for those cases for which we are liable by law. Any damages arising out of the misuse of the TV set may result in damage to or loss of data. We are not responsible for any damaged data. To avoid this, ensure to back up an important file. This unit is designed for you to listen to personally converted MP3 files for personal use only. Also, when listening to any copyright-protected files, ensure to use a separate MP3 player. Precautions when inserting a memory card Turn the TV set off before connecting all necessary cables. Insert a memory card with the label facing up avoiding twisting or skewing. Insert a memory card with the label facing up and the arrow on the label pointing toward the unit. Inserting the memory in upside down may result in damage to the memory card or unit. Do not attempt to remove a memory card while it is in operation. This may cause serious damage to the memory card or unit. Ensure to stop all memory cards before removing a memory card from the unit. Make sure the cards are completely and firmly inserted into the appropriate slots. Improperly seated cards will cause serious damage to memory cards or unit. Make sure the RSMMC, miniSD, T-FLASH, MS Duo and MS Pro Duo memory cards are inserted into an adapter. Contact the dealer where your memory card is Adapter purchased. MEMORY MODE Commercially available memory cards (Sold separately) - The available types of memory cards by slot are shown on the side of the TV. - The playback speeds vary depending on the memory card types. Memory Card Slot 1 (MT) 65 Memory Card Slot 2 (CF) HYUNDAI Vvuon Digital LCD TV Supported Files CompactFlash : 8MB ~ 4GB Microdrive : 1GB, 2GB, 4GB / 2.5GB, 5GB SmartMedia : 8MB ~ 128MB xD-Picture : 16MB ~ 512MB / 1GB(M-CARD) MultiMediaCard/RS MMC : 8MB ~ 1GB Secure Digital/miniSD : 8MB ~ 1GB Memory Stick/Duo : 4MB ~ 128GB Memory Stick Pro/Duo : 256MB, 512MB, 1GB Available memory card capacity Using a memory card with capacity larger than the unit is capable of supporting may cause an error. A very high capacity of a memory card may result in slow speed. Some non-supported Jpeg or MP3 files may not be played back. USB 1.1 HOST USB HDD, Flash Memory Bar MP3 Player (Available only in portable disk mode) Cellular Phone (Available only in portable disk mode) Power Supply Make sure to use TV USB power for USB HDD with 2.5” or less. Never use separate power. Make sure to use separate power for 3.5” USB HDD. USB HOST Supported Media File Types Support Photo Compatibility Support JPEG : JIFF, EXIF (.jpg) Baseline JPEG : 5120x3840 (Max. Resolution) Progressive JPEG : 2048x1536 (Max. Resolution) DivX3, DivX4 XviD (.avi) MPEG-2 (.mpeg/.mpg/.vob) MPEG-1 (.mpeg/.mpg) MPEG-4 (.mpeg/.mpg, asf) DivX Movie Compatibility Support - 720 x 480 30fbs or less, - 720 x 576 25fbs or less - AC3 support, MPEG-1 audio layer-2 and 3 encoded files - GMC(Gobal Motion Compression), Q-Pel(Quarter Pixel) not supported. MPEG-2 - Main prolile@Main level, - 2Mbps below supported MPEG-4 - 640 x 480 (4Mbps or less), - MPEG-4V1 : not supported - MPEG-4V2 : Simple Profile supported. Motion JPEG(.avi) - 640 x 480 15 frames/sec MP3 Music MP3i, MP3 PRO not supported MEMORY MODE Compatibility ID3 tag not supported Supported Compressed Jpeg/Image File Format Compression method Color format Standard (Baseline) Optimization (Progressive) 4:4:4 11:11:11(Y,Cb,Cr) 4:2:2, 21:11:11(Y,Cb,Cr) 12:11:11(Y,Cb,Cr) 4:2:0 22:11:11(Y,Cb,Cr) JPG compression Image display Image Image Not supported Image Image 66 Using a Memory Card 1. Insert a memory card or USB memory into Slot 1/2 or USB port. 2. Press 3. Press to power on. to select Memory Mode. Memory Card Slot 2 (CF) 4. Refer to icons listed below menu screen to manipulate. CAUTION ! When you are going to remove the memory card, press the button on the remote control. You can go back to the initial screen anytime to remove the memory card safely while keeping the damage to stored data to a minimum level. If you have pressed the EXIT button, you have to remove and then insert the memory card or turn the power off and on to use the memory card. Otherwise, a message No device will appear when selecting. Only one memory card is allowed for each slot. Memory Card Slot 1 (MT) Shifting into Memory Mode MEMORY MODE Memory Mode allows you to play back photos, music, movies and motion pictures files that are stored in memory cards. When selecting a slot into which no memory card is inserted, a message, No device will appear. Move one of the slots you want. 67 The initial screen of the memory mode will appear. HYUNDAI Vvuon Digital LCD TV Viewing the stored photo files Current page/All pages Mode Card type/capacity Preview Manipulation buttons Viewing full-size photos 1. Press to select. To the icon menus, press the MEMORY MODE Press to move a photo file you want. button. 1) JFIF - As decording is required when making a listing, decording time is different according to file sizes. - While the slide show is in operation, music may be paused temporarily or corrupted according to the performance of the memory card or USB device. 2) EXIF Listed files are quickly displayed when making a listing. This is because EXIF files that have been created by a digital camera, etc. contain already listings. 68 Viewing full-size photos Whenever you press from the current screen, magnifying powers are shifted in sequence 1X(original size). After zooming in a photo, press to move. 1.5X 2X 2.5X Rotating a photo To rotate the photo by 90 degrees clockwise, press counterclockwise, press button. To rotate the photo by 90 degrees button. Viewing images using Slide Show 1. Press to display Option Menu. MEMORY MODE 2. Press to move between items and press to change. 3. After setting, press FAST buttons to move to PLAY. RANDOM Press to start a slide show. MEDIUM SLOW TOP->BUTTOM CENTER->LEFT/RIGHT LEFT->RIGHT (BLIND) CLOSS FADE ON OFF Slow access may take place according to file sizes, selected effect mode and card types (MMC/MS) or due to unsupported image files. This may result in difference in time taken to display images or corrupted music sound. 69 HYUNDAI Vvuon Digital LCD TV Viewing the stored music files Artist/File size Selected file/All files Mode Card type/Capacity File name/Playing time Manipulation buttons When you press , the slide show function starts playing back music files according to the selected options in photo mode. ModeaMusic file name File information 1. Press 1. Press MEMORY MODE Playing back music files to display Option Menu. to play back. Whenever you press , you can set Repeat 1 Play Sequence. Repeat All When you press Playing time Manipulation buttons you can listen to music in power saving mode. 70 Checking the stored movie files Playing time/File creation date File order/All files Playback mode Mode File name/Playing time Card type/Capacity Manipulation buttons You can set to play back all files (Play Sequence) or selected file (Play One) in sequence by pressing MEMORY MODE Playing back movie files 1. Press to move to movie file you want. 2. Press to select a movie file to play back. To hide the icon menus on the bottom of the screen, press To perform Rewind or Fast Forward, press To pause, press To see running time, press 71 (BROADCAST). HYUNDAI Vvuon Digital LCD TV - Slow access may take place according to card types (MMC/MS). This may result in interruption of a motion picture being played back. - When playing back a motion picture stored in a USB memory, an interruption may take place. This phenomenon is not because the product yields its low performance but because the transmission speed differs depending on the USB memory types. Checking the stored movie files Card type/Used space/Total capacity Mode File order/All files Card type/Capacity File name/File creation date Manipulation buttons MEMORY MODE Running a file 1. Press to move to a file you want. 2. Press to run. If you select, in Photo Mode, Music Mode or Movie Mode, one of the non-executable files or unrecognized files stored in the memory card, an error message, “No file in this mode” will appear. 72 How to Use an External Device Using the Remote Control When setting other manufacturer s product using the remote control, some of the buttons on the remote control may not operate or different functions may be activated, or some of other manufacturer s products may not work. Some of DVD/VCR combos are allowed only either in DVD mode or VCR mode. 1. Turn on the external device you want to set. 2. Whenever you press VCR DVD CATV button on the remote control, the mode shifts TV in order. 3. If the external device has been chosen, press the at the same time for two seconds. button and button 4. Enter an appropriate 3-digit number of the manufacturer from the DVD Setting Number Table. (If the product brand you want to set has multiple setting numbers, attempt to enter the setting numbers repeatedly until the product is turned off.) 5. When the product has turned off, press the button again. (The appropriate button associated with the product will flash 3 times to show the product operates properly.) 6. Check that the Power button works normally and then check that other function buttons work normally. If the Power button works normally but other function buttons do not, repeat the above steps from the beginning. Depending on product brands or setting numbers, the power button may work normally but other function buttons do not work. APPENDIX VCR Setting Number Table 73 HYUNDAI Vvuon Digital LCD TV DVD Setting Number Table APPENDIX 74 APPENDIX AMP Setting Number Table CATV Setting Number Table 75 HYUNDAI Vvuon Digital LCD TV Glossary 1 Component video Component video is sent through three cables: two color shade (chrominance) signals and one brightness (luminance) signal. Component video achieves greater color accuracy than composite video or S-VIDEO by splitting chrominance into two separate portions. Composite video Composite video is sent through a single cable. Composite video combines the color shade (chrominance) and brightness (luminance) information into one video signal. S-VIDEO S-VIDEO requires a single cable, which carries the brightness (luminance) and color (chrominance) signals of the picture separately. S-VIDEO provides better resolution than composite video, which carries the signals together. 480i Provides 480 lines of resolution. Displays images using interlaced scanning, which first transmits all the odd lines on the TV screen and then the even lines. 480p Provides 480 lines of resolution. Displays images using progressive scanning, which transmits each line from top to bottom. 720p Provides 720 lines of resolution. Displays images using progressive scanning, which transmits each line from top to bottom. 1080i Provides 1080 lines of resolution. Displays images using interlaced scanning, which first transmits all the odd lines on the TV screen and then the even lines. 1080i is one of the formats used by HDTV (High Definition TV). Digital television (DTV) HDTV(High Definition TV) SDTV(Standard Definition TV) Cable Broadcast Receiver (Converter) VHF/UHF HDTV is a new kind of digital TV, creating a high quality picture, high definition. The HDTV provides a theater-like screen with an aspect ratio of 16:9. Supports 720p or higher. SDTV is a new kind of standard definition digital TV, having a range of lower resolution than the HDTV. Supports 480i. A device that receives cable broadcasting. Connecting it to your TV set allows you to watch a various channels. APPENDIX Satellite Broadcasting A new technology for transmitting and receiving broadcast television signals. DTV provides higher resolution and improved sound quality over analog television. Provides crisp picture and clear audio quality throughout the country via a satellite. VHF (Very High Frequency) is the part of the frequency spectrum from 30 to 300 megahertz. UHF (Ultra High Frequency) is the part of the frequency spectrum from 300 to 3,000 megahertz. 76 Glossary 2 DVD Coaxial Cable LNA (Low-Noise-Amplifier) Aspect ratio PIP (Simultaneous Screen) SWAP Picture Mode APPENDIX Sound Mode Coaxial cable is the kind of rounded copper cable, which is generally used for TV antenna. Satellite applied technology. It is capable of amplifying weak signals so that any area experiencing a signal interruption may enjoy a clearer picture quality. Refers to the ratio between the width and height of the screen. This TV has a 16:9 (widescreen) aspect ratio, as opposed to a 4:3 aspect ratio. PIP allows you to view two images at the same time in a single screen. PIP function provides a main picture (larger image) and sub-picture (smaller image). The SWAP is designed to swap the sub-picture for the main picture. For example, while you are watching a main picture on TV and watching a sub-picture on VCR, you can instantly switch the two pictures by using the SWAP function. Picture Mode features the optimal picture quality. There are Standard-Dynamic-MovieMild- Custom features in order. “CUSTOM” allows you to adjust Contrast, Brightness, Sharpness, Color and Tint. Sound Mode features the optimal sound quality. There are Standard-News-MusicSports- Custom features in order. “CUSTOM” allows you to adjust high frequency sound, middle frequency sound and low frequency sound. Digital Broadcasting Video and Audio signals digitized and transmitted by broadcasting companies complying with the new digital television standard developed by the ATSC (Advanced Television System Committee). Digital Broadcasting technology provides multimedia services including a variety of additional services as well as high-definition quality picture. Analog Broadcasting ATSC-based Video and Audio signals transmitted by broadcasting companies. SRS TruSurround TX A well-recognized 3D sound technology developed by US SRS Labs, Inc. This technology delivers the ultimate audio experience only with two speakers as if through multi-channel speakers. Dolby Digital 77 DVD (Digital Versatile Disc) is an optical disc that can store a huge volume of multimedia such as video, game, and audio application, etc. Formerly known as AC-3, Dolby Digital is a digital audio coding technique that reduces the amount of data needed to produce high quality sound. HYUNDAI Vvuon Digital LCD TV Glossary 3 Subwoofer Mono Stereo Widescreen Panorama screen External source Designed to improve ultra low frequency with about 150Hz. There are active type that is built with a built-in amplifier and passive type that is required to connect an additional amplifier to it. Audio signals are produced through a single channel. It is difficult to experience a spectacular sound since audio signals are reproduced with a single speaker. Audio signals are produced through two channels. A spectacular sound is reproduced with two separated speakers. Term given to picture displays with a wider aspect ratio than NTSC 4:3. Digital HDTV is 16:9 widescreen. Most motion pictures also have a widescreen aspect ratio, some even wider than 16:9. Refers to a screen whose distortion due to the screen size has been calibrated. Refers source signals that come from other external devices such as a VCR, camcorder and DVD player, etc. than a TV set. MTS A bilingual service provided when an overseas film, foreign drama or overseas news, etc. is aired. You can select one of two choices: mother tongue and foreign language. Or you can listen to both languages at the same time. DVI Digital Visual Interface is a specification for digital signals. This interface using TMDS transmission reduces the loss of signal, allowing to enjoy a clear and crisp image. Virtual channels APPENDIX For terrestrial reception of digital signals, virtual channels are used. A virtual channel allows users to use channel digits, regardless of their area, allocated to each broadcasting station. To receive digital signals, you have to automatically tune channels or in case of off-air, you have to directly select UHF channel digits aired by individual stations or in case of cable broadcasting, you have to directly select channel digits allocated by local cable stations. For example, the UHF 14 (MBC), 15 (KBS1), 16 (SBS), 17 (KBS2), and 18 (EBS) transmitted from Kwanak Mountain are indicated with virtual channels, 11-1 (MBC), 91 (KBS1), 6- 1 (SBS), 7-1 (KBS2), and 10-1 (EBS), which will be used by you. These virtual channels are all used in the same way nationwide but the channel digits may be different depending on local stations. Since the digital channels may be allocated differently according to areas or changed by the broadcasting policy, contact your local broadcasting stations and cable companies for more details. Once virtual channels have been memorized, you can watch virtual channels by pressing channel numbers. 78 Troubleshooting Installation Problems Symptom How can I install an antenna? TV screen is not clear after installing an indoors antenna. How can I view cable broadcasting? Possible solution Refer to pages 19~20. Indoors antenna may experience poor reception due to surrounding buildings. Please install an outdoors antenna or wireless antenna. Please install a cable broadcasting receiver (Converter). Picture Problems Symptom Neither picture nor sound comes up. Picture turns on slowly after power is on. Picture is distorted or frozen while watching digital broadcasting. Input Source information only appears on black screen. Poor reception on some channels. APPENDIX Black and white on some channels. TV won’t turn on. Screen is too bright or too dark. 79 Possible solution Check whether power is on. Check whether the power is cut or whether power cord is properly connected. Try to plug another product’s power cord to the outlet the PDP is plugged into. This symptom is not a malfunction. This delay is designed to prevent the distorted and noisy picture when power is on. However, if the picture does not appear more than 5 minutes after power is on, call a service center. This symptom may be caused by weak reception. Contact your local station or cable company. Check whether your TV is properly connected to external devices. Check whether you selected proper channels. Try re-orienting your antenna. Ensure LNA is activated. Check other channels for black and white screen. Adjust colour. Ensure the power cord is plugged. Adjust brightness. HYUNDAI Vvuon Digital LCD TV Auto On does not work. Ensure to use the remote control or power button on the product to turn off your TV. If you unplug the power cord, the stand-by consumption power becomes 0 (zero), which causes the programmed time to be erased. After setting the time, I turned TV off and turn it on. The programmed information has been erased. Ensure to use the remote control or power button on the product to turn off your TV. If you unplug the power cord, the stand-by consumption power becomes 0 (zero), which causes the programmed time to be erased. Sound Problems Symptom Too much noise occurs. No sound while viewing a cable channel Possible solution Check whether the audio setting is in the Stereo mode. In the Stereo mode, the sound may be distorted in the area where experiences poor reception or is located far away from a TV broadcasting station. Make sure an audio or audio/video component is securely inserted into the appropriate jacks. Check other channels for sound. Check the volume settings on the cable broadcasting receiver. Picture is OK but sound does not come out. Try to press volume up/volume down buttons of your remote control. One of the speakers does not produce sound. Select sound balance and make proper adjustment. (Page 39) Check the speaker connection cables. General Symptom Remote control won't work. Where does the S-Video cable plug in for audio output? Possible solution Check whether there is a blocking object between the remote control and PDP. Make sure your PDP is Power On. (In case of normal, LED on the front panel is in Red.) Check whether batteries are inserted with proper polarities(+, -). When the batteries are worn out, replace with new ones. Connect the two Audio jacks from the S-Video cable to the left and right ports on the Composite. Ticking noise during or after watching is caused by the change of ambient environment such as humidity and temperature, which is characterized by plastic products. Strange ticking noise occurs because a signal is suddenly transmitted to the PDP panel. So, this is not a malfunction. I tried to use the TV screen as a PC monitor but it doesn’t work. Adjust the resolution referring to the standard signal mode table. Check the specification of your video card installed in your PC. If your video card does not work in supported hardware. Try upgrading the video card’s driver. APPENDIX Strange noises are heard. 80 Care and Cleaning Cabinet Cleaning Wipe a soft dry cloth. Do not use inflammables like Benzene or Thinner, or wet clothes. Do not scratch the panel of PDP with a fingernail or pointed object. Screen Cleaning Clean the screen with a soft cloth moistened in mild glass detergent and dry with a soft cloth. Never use any solvent on the screen such as Acetone, Benzene, or Thinner, etc. Cleaning Inside When the inside needs to be cleaned, contact a service center or distribution agent where the item is purchased. APPENDIX It is recommended cleaning is complete before the rainy season. 81 HYUNDAI Vvuon Digital LCD TV Product Specifications Q261 Q320 Q400 S-Video 1EA (A/V audio common) 1EA (A/V audio common) 1EA (A/V audio common) Video (RCA) 1EA (Audio included) 1EA (Audio included) 1EA (Audio included) Component(Y/Cb/Cr) 2EA (Audio included) 2EA (Audio included) 2EA (Audio included) Antenna 2EA (ANT1+ANT2) 2EA (ANT1+ANT2) 2EA (ANT1+ANT2) D-SUB D-SUB Model Input PC Connection jack D-SUB Output TV/Video Power Max. resolution 1024 X 768 @ 85 Hz 1024 X 768 @ 85 Hz 1024 X 768 @ 85 Hz Audio L/R L/R L/R DVI-HDCP 1EA 1EA 1EA Memory Slot No Slot 1, Slot 2, USB No Subwoofer 1EA 1EA 1EA Video 1EA (Audio included) 1EA (Audio included) 1EA (Audio included) Color system NTSC M NTSC M NTSC M Sound system FM FM FM Video system Component, S-Video, Composite, PC, DVI Component, S-Video, Composite, PC, DVI Component, S-Video, Composite, PC, DVI Supply AC 100 - 240 V, 50/60 Hz AC 100 - 240 V, 50/60 Hz AC 100 - 240 V, 50/60 Hz Consumption power Typical 120W Typical 150W Typical 245W Stand-by power Typical 2W Typical 2W Typical 2W Dimension (W x D x H mm - Stand included) 640 x 230 x 485 772 x 230 x 563 988x 715.5x297 Weigh (Stand included) 17.5 Kg 19.3 Kg 23 Kg Control type Remote control, Key control Remote control, Key control Remote control, Key control - The above specifications may be subject to change without prior notice. APPENDIX 82 P/N 632 0239 201 Rev.00 Hyundai ImageQuest JAPAN Shin-Hibiya Bldg, East 5F 1-3-6 Uchisaiwai-Cho, Chiyoda-ku, Tokyo, Japan 100-0011 Tel : 03-5157-2286 Fax : 03-5157-2284 e-mail : pjkim@iqt.co.kr C/S P.J.Kim JAPAN Hyundai ImageQuest Europe GmbH Geheimrat Hummel Platz 2 65239, Hochheim, Germany Tel : 06146 / 904 444 Fax : 06146 / 904 410 e-mail : service@hyundaiq.de WWW : www.hyundaiq.com GERMANY Thomas Electronics Australia Pty Ltd. 3 Sheridan Close Milperra NSW 2214, Australia Tel : +61 2 9773 7400 Fax : 61 2 9773 7177 Attn : Ms. Shiely Poniman AUSTRALIA TRANSTECH DISTRIBUTORS Ltd. PO Box 12985 Penrose, Auckland New Zealand Tel : 09-571-0775 Fax : 09-571-0776 e-mail : LouisG@Transtech.co.nz WWW : www.transtech.co.nz NEW ZEALAND AVC Tech 777 Mark St., Wood Dale, IL 60191 Tel : 800-568-0060 or 630-595-0123 Fax : 800-784-9422 or 630-595-2345 e-mail : service@hyundaimonitor.com USA
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2005:12:08 14:53:43+09:00 Modify Date : 2005:12:08 14:53:43+09:00 Metadata Date : 2005:12:08 14:53:37+09:00 Creator Tool : PScript5.dll Version 5.2 Document ID : uuid:291BE9F9AE67DA11968AD0C7CC025259 Instance ID : uuid:d8447461-5672-4cae-a507-5c681063d776 Derived From Document Name : uuid:e1b954d1-4468-49ee-b96e-ad33e59ce030 Derived From Instance ID : uuid:52a49c1b-5e87-45c0-a634-af9f4cfeb88e Derived From Document ID : uuid:ae48260f-ce5b-4e45-ba4e-23b342f91228 Format : application/postscript Title : untitled Creator : Owner Page Count : 49 Author : OwnerEXIF Metadata provided by EXIF.tools