Hyundai IBT PT42DA000 PDP TV User Manual 1 7 Appen eng

Hyundai IBT Corp. PDP TV 1 7 Appen eng

Users Manual 2

13General InformationENGLISHRear ViewPower switchPower (AC) input terminal DVI Video / HDMI input terminalD-SUB input terminalDVI/D-SUB Audio input terminal Component 2 Audio input terminalComponent 2 Video input terminalComponent 1 Audio input terminalComponent 1 Video input terminalCVBS output terminalFull Scart input terminalAntenna input terminalDigital Audio output terminal forcoaxial cableSubwoofer output terminalExtend Audio ontput terminalS-Video input terminalVideo(CVBS) input terminalAudio(CVBS) input terminalHeadphone output terminalHalf Scart input terminalExtend an RS-232 input for ATVcommunication.SPDIF Optical audio outputterminalExtend an RS-232 input for DTVcommunication.Speaker terminalUSB Input TerminalMemory Card Slot* For Q320 Model only* This product image may be a bit different from the actual product.HDMI Option
14General InformationENGLISHParts Names and Functions - 40” LCD TVFront ViewSpeakersPower SwitchRemote sensor and power LED.- Point the remote control toward LED.- It displays standby or operation status.Standby/On buttonUse this button to turn on or off the TV.Source buttonUse this button to switch among inputsconnected to the TV.Menu buttonUse this button to display or exit from the menumode.Select buttonUse this button to select each item from themenu mode.Channel buttonsUse these buttons to change channels. Thesebuttons also serve as the cursors of Down andUp buttons in Menu mode.Volume buttonsUse these buttons to adjust sound levels.These buttons also serve as the cursors ofSelect/Adjust in Menu mode.* This product image may be a bit different from the actual product.- Power Indicator Status -IndicatorRedGreenStatusStandbyPower on
ENGLISH15General InformationRear ViewPower (AC) input terminal DVI Video / HDMI input terminalD-SUB input terminalDVI/D-SUB Audio input terminal Component 2 Audio input terminalComponent 2 Video input terminalComponent 1 Audio input terminalComponent 1 Video input terminalCVBS output terminalFull Scart input terminalAntenna input terminalDigital Audio output terminal forcoaxial cableSubwoofer output terminalExtend Audio ontput terminalHalf Scart input terminalExtend an RS-232 input for ATVcommunicationSPDIF Optical audio outputterminalExtend an RS-232 input for DTVcommunicationHeadphone output terminalAudio(CVBS) input terminalVideo(CVBS) input terminalS-Video input terminalUSB Input TerminalMemory Card Slot* For Q400 Model only* This product image may be a bit different from the actual product.HDMI Option
ENGLISH16General InformationParts Names and Functions - 42”/50” PDP TVFront ViewPower buttonUse this button to turn on or off the TV.Volume buttonsUse these buttons to adjust sound levels. Thesebuttons also serve as the cursors of Select/Adjust inMenu mode.Channel buttonsUse these buttons to change channels. These buttonsalso serve as the cursors of Down and Up buttons inMenu mode.Select buttonUse this button to select each item from the menumode.Menu buttonUse this button to display or exit from the menu mode.Source buttonUse this button to switch among inputs connected tothe TV.Remote sensor and power LED.- Point the remote control toward LED.- It displays standby or operation status.* This product image may be a bit different from the actual product.- Power Indicator Status -IndicatorRedGreenStatusStandbyPower on
17General InformationENGLISHRear ViewDVI Video input terminalD-SUB input terminalDVI/D-SUB Audio input terminal Component 2 Audio input terminalComponent 2 Video input terminalCVBS output terminalFull Scart input terminalS-Video input terminalAudio(CVBS) input terminalHeadphone output terminalAntenna input terminalDigital Audio output terminal forcoaxial cableSubwoofer output terminalHalf Scart input terminalSPDIF Optical audio outputterminalExtend an RS-232 input for DTVcommunicationPower (AC) input terminal Extend Audio ontput terminalVideo(CVBS) input terminalExtend an RS-232 input for ATVcommunicationComponent 1 Video input terminalComponent 1 Audio input terminalPower switchStand assemblySpeaker terminalSpeaker assemblyScrew hole for fixing on a wallCarrying handles* This product image may be a bit different from the actual product.
18General InformationENGLISH1. POWER/STANDBY2. MUTEThis button is also used when setting up to use other externaldevices.3. PIP FUNCTIONS- PIP: Use this button for PIP On/Off.- SOURCE: Use this button to select the input source of sub-picture.- SIZE : Use this button to select the size of sub-picture.- SWAP : Use this button to swap main and sub-picture.- POSITION : Use this button to select the position of sub-picture.4. PREVIOUS PROGRAM5. A/D TVUse this button to switch the input source from analog todigital6. Other external device selection ( 59P)7. MENU SELECTIONUse this button to select menu items.8. LEFT/RIGHT MOVE/ADJUST- Use these buttons to move between menu items or adjusteach item.- Use UP/DOWN buttons to select Analog TV channels.9. MENUUse this button to call the OSD on the screen.10. EXITUse this button to end the OSD.11. DTV CHANNEL SELECTIONYou can also use these buttons when changing pages in TTXmode.12. STILL 13. PC-AUTO (For PDP TV only)14. Use this buttons to use other manufacturer’s DVD orVCR.15. INFOMATIONUse this button to display resolution or various program.16. SOURCEUse this button to select External Input.17. VOLUME18. SOUND MODE19. SLEEP20. ASPECT RATIOUse this button to change the picture size.21. NUMERIC KEYSRemote Control
19General InformationENGLISHPower Saving Function when listening to musicMusic Playback Setting (Repeat 1, Repeat All, Sequence)Select, Start, Pause/PlaybackMove between file listings, Previous Track/Next Track, Reverse/Fast Forward, Photo RotationExit, CancelEject CardSlide ShowZoom InCheck Version (Initial Screen), Check Running Time (Movie Mode)Hide MenuWhen Shifting into Memory ModeOther buttons available in Memory ModeHow to Insert Batteries in the Remote Controller * Battery type :1.5V/AAAUsing buttons when in Memory Mode -* For Q320, Q400 Model onlyThe following buttons are used differently in each menu. (See pages 51~58 for more details.)Teletext & Fastext Function (See pages 34 for more details.)1. TTX/MIXTo see Teletext Service Data for Analog TV and Digital TV.2. GUIDE (EPG-Electronic Program Guide)To watch the program information. Press once more to returnto normal mode.3. CH. LISTTo watch the channel list for Digital TV. Press key toconfirm or press EXIT to return to previous channels.4. RED rubber- DTV : To setup favorite channel lists in the Channel List menu.- ATV : To delete a channel in the Program Edit menu.5. GREEN rubber- DTV : To lock favorite channel lists in the channel list menu.- ATV : To sort channels in the Program Edit menu.6. YELLOW rubber - DTV : To move favorite channel lists in the channel list menu.- ATV : To edit channel names in the Program Edit menu.7. BLUE rubber DTV : To delete a channel from the channel List menu. To showextended program information in the EPG menu.8. S.MODETo adjust the subtitle and audio condition/status of the currentchannel for Digital TV9. TV-RADIOTo switch between the TV channel and radio channel forDigital TV.10. WHITE rubberDTV : To add a new channel to the Channel List menu.11. ORANGE rubberDTV : To see variant channel lists for user’s convenience in theChannel List menu.Press and hold Δpart and push to opencover. Insert batteries with proper polarities of+ and -.Use the remote control with cover closed.123
20ConnectionsENGLISH✓When inserting a 75 ohm coaxial cable into the input connection, ensure the wire tip not to bend.✓If you experience poor signal reception, we recommend you purchase a signal amplifier for better picture quality.VHF AntennaUHF AntennaAntenna cableConnecting Indoor/Outdoor TV Antenna(UHF/VHF)- Antenna or Cable service without cable box connections- For on optimum picture quality, adjust the direction of antenna if needed.VCR/Cable ReceiverConnecting Antenna Input Connection to External Equipments1. Connect an antenna cable to VCR/Cable/Satellite Receiver with the antenna input.2. Use a coaxial cable to connect VCR/Cable/Satellite Receiver's antenna output to the antenna input on your TV.Antenna cable26”/32”/40”TV42”/50” TV26”/32”/40”TV42”/50” TV
21ConnectionsENGLISHBefore Connecting the Video/Audio Connections to External Devices... Please make sure to read the following instruction to enjoy the best picture quality.Best picture quality is displayed in the following order.The superior picture quality starts from the far left side.✓Output terminal mark (Y, Pb, and Pr) of DVD player may be indicated as Y, B-Y, R-Y/Y-Cb-Cr /Y-Pb-Pr according to thetype of DVD player models.✓If your DVD player or Set Top Box supports HDMI/DVI or D-SUB, see Connecting to a PC (page 22) for connection. Youcan enjoy more clear picture quality.DTV receiver / DVD PlayerAudio cableVideo (Y, Pb, Pr) cableHow to Connect a DTV Receiver or DVD Player1. Connect the Video cable (Y, Pb, Pr) between output terminals (Y, Pb, Pr) of DTV receiver or DVD player and theinput terminals (Y, Pb, Pr) of DTV/DVD (576i/576p/720p/1080i) on the rear of TV. (Connect the jacks to terminals in the same color.)2. Connect the Audio cable between Audio output terminals of DTV receiver or DVD player and Audio input terminalfor DTV/DVD Audio on the rear of TV. (Connect the jacks to terminals in the same color.)HDMIFULL SCARTHDMI,DVI-1, D-Sub COMPONENT S-VIDEO COMPOSITE HALF SCAT
How to Connect to a PC1. Connect the PC signal cable (15-pin D-sub) between the output terminal of PC and the D-sub input terminal of TV.2. Connect the Audio cable between Audio output terminal of PC and Audio input terminal for PC on the rear of TV. (Connect the jacks to terminals in the same color.)✓If you use DVI/HDMI connection, you can enjoy better picture quality.✓This product supports Plug-and-Play function.✓We recommend the above method if the DVD player or set top box supports DTV signal with DVI/D-sub (15 pin) cablefor better picture quality.✓If you input an unsupported resolution in PC or DVI/HDMI mode, the screen won’t be displayed properly. How to Connect a VCR, Cable Receiver, Camcoder, Game Player1. Connect the Video cable or S-Video cable between Video/S-Video output terminals of VCR or Cable receiver andVideo/S-Video input terminal of TV. (Connect the jacks to terminals in the same color.)2. Connect the Audio cable (Left: white, Right: red) between Audio output terminals of VCR or cable receiver andAudio input terminal of TV. (Connect the jacks to terminals in the same color.)✓ To enjoy a better picture quality, use the S-Video cable rather than the composite cable. DVI cable (DIGITAL)D-SUB cableAudio CableorVideo cable orS-Video CableVideo cable orS-Video CableGame PlayerCamcorderVideo/Cable receiverAudio cable Audio cable26”/32”/40” TV42”/50” TV22ConnectionsENGLISH
23ConnectionsENGLISHResolutions Supported in PCVertical frequency70.00-72.8075.00--70.0860.3275.0072.1974.5560.0070.0775.0360.0274.99Horizontal frequency31.47-37.8631.50--31.4737.8846.8848.0849.7348.3656.4860.0263.9861.27Vertical frequency70.0985.0859.9472.8075.0085.0170.0860.3272.1875.0085.0674.5560.0075.0385.00--Horizontal frequency31.4737.8631.4737.8637.5043.2731.4737.8848.0846.8853.6749.7248.3660.0268.68--ModelResolution640 x 350640 x 480720 x 400800 x 600832 x 6241024 x 7681280 x 10241366 x 76826” / 32” / 40” LCD TV 42” / 50 PDP TVScart Connection to the External Input/OutputIf you have a second VCR and wish to copy casettes tape. Connect the source VCR to “F Scart” and the target VCRto “H Scart” so that you can redirect the signal from “F Scart” to “H Scart”.* “F Scart” sends the TV broadcast signal received through an antenna to a set-top box and receives thedescrambled signal back, which allows you to view TV broadcasts in AV Mode.* “H Scart” you are capable to record live TV broadcasts on the TV screen. (Please make sure that your TV is “ON”.) ✓When switching voltage comes into the Scart-Pin 8 during viewing a TV program, the current mode will be switchedto Scart mode. F SCARTSET TOP BOXVIDEO(CVBS)+ Audio(L/R)TV OUTTV IN - F Scart Input : RGB, CVBS - F Scart Output : CVBS- H Scart Input : CVBS - H Scart Output : CVBSVideo Game DeviceVideo Disc PlayerSatellite ReceiverDVDVCR
*1. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMILicensing LLC.*2. EIA/CEA-861/861B profiles compliance covers profiles for transmission of uncompressed digital video including highbandwidth digital content protection.HDMI Connection (For HDMI model only)HDMI*1(High Definition Multi media Interface) is the first all digital consumer electronics A/V interface that supportsuncompressed standard. The HDMI terminal supports both video and audio information.To the HDMI™ input terminal, you can connect an EIA/CEA-861/861*2compliant consumer electronic device, suchas a Set Top Box or DVD player with HDMI or DVI output terminal.Compatible VIDEO Signal- This input terminal is not intended for use with computers.Compatible sampling freguency of AUDIO signal through HDMI (L.PCM) : 48kHz / 44.1kHz / 32 kHz➥ Notes :• This HDMI connector is Type A.• If you connect an equipment without a digital output terminal, connect to the COMPONENT VIDEO, S VIDEO orVIDEO input terminal on the TV so you can enjoy an analog signal.• The DIGITAL IN terminal can only be used with 1080i, 720p or 576p picture signals. Set the Digital Set -Top -BoxDIGITAL OUT terminal Output setting to 1080i, 720p or 576p. For detailed information, refer to the Digital Set -Top- Box instruction manual. If you cannot display the picture because your Digital Set -Top -Box does not have aDIGITAL OUT terminal Output setting, use the component Video Input (or the S Video Input or Video Input). In thiscase the picture will be displayed as an analog signal.HDMIHDMI CableSet Top BoxDVD PlayerIf the external device has DVIoutput only, use a DVI to HDMIadapter cable to connect to theHDMI terminal.505050501,920 x 1,080i720 x 576p640 x 576p1280 x 720pModel1080i576p720pResolution Vertical frequency24ConnectionsENGLISH
25ConnectionsENGLISHDifferent OSD Menu You can confirm OSD menu of three different type.How to Set the OSD ScreenPC : For supporting Personal Computer connection.DVI* : Digital Visual Interface for using TMDS transmissionreduces the loss of signal.➥ *Notes : “DVI” is changed to “HDMI” in HDMImodel.HDMI* : High Definition Multi media Interface that supportsboth video and audio information.COMP-1 / COMP-2 : For supporting greater color accuracy thancomposite video or S-VIDEO by splittingchrominance into one video signal.S-VIDEO : For supporting better resolution than composite video,which carries the signals together.VIDEO : For supporting the color shade(chrominance) andbrightness(luminance) information into one video signal.F-SCART - For supporting composite video and RGB videosignals. SCART connectors is used with manyEuropean video equipments.H-SCART - Basically the same as Full SCART in function but notsupporting RGB Video signals.ANALOG TV - Terrestrial broadcasting for supporting analogPAL/SECAM system.✓ The menu button “EXIT” or“PREV.” may occurdepending on the model.✓ In case of the source inAnalog TV, S-VIDEO, VIDEO,F-SCART, H-SCART✓ In case of the source in iDTV ✓ In case of the source in PC, DVI,COMP-1, COMP-2
ENGLISH26Picture SetupPress MENU button. Menu items appear on the screen.Press button to select “Picture” Icon.“PICTURE MODE” is highlighted.Press / buttons, then the menu changes in the following order.➛STANDARD ➛DYNAMIC ➛MOVIE ➛MILD ➛USER ➛Press EXIT button to TV viewing or press MENU button to return to the previousmenu.♦ STANDARD : Most video contents are appropriate to this mode. ♦ DYNAMIC : Clear display ♦ MOVIE : When watching a movie♦ MILD : Soft display.♦ USER : When the user wants to set the values directly. ✓ In the user’s mode, the users can adjust their desired contrast, brightness,sharpness, hue, saturation.How to Select the Picture ModeUsers can automatically adjust the picture mode according to the input mode.How to Set the Desired PictureUsers can manually adjust their desired picturePress MENU button.Menu items appear on the screen.Press button to select “Picture” Icon.“PICTURE MODE” is highlighted.Press / buttons to select USER .Select required option by pressing the / button, then Press / buttonto adjust.Press EXIT button to TV viewing or press MENU button to return to the previousmenu.♦ CONTRAST : Adjust the brightness and darkness of the object and backgrounds. ♦ BRIGHTNESS : Adjust the brightness of the entire picture. ♦ SHARPNESS : Adjust the clarity of object outlines.♦ SATURATION : Adjust colors into deeper or lighter colors.134212345
ENGLISHPress MENU button.Menu items appear on the screen.Press button to select “Picture” Icon.“CONTRAST” is highlighted.Select required option by pressing the / buttons, then Press / buttons to adjust.After selecting COLOR TEMP, then the menu changes in the following order.➛NORMAL ➛WARM ➛COOL ➛sRGB ➛USER ➛Press EXIT button to TV viewing or press MENU button to return to the previousmenu.♦ NORMAL : For a general Color Tone.♦ WARM : For warm colors with reddish tone.♦ COOL : For cool colors with bluish tone.♦ USER : When the user wants to set the degree of RGB directly.Press MENU button.Menu items appear on the screen.Press button to select “Picture” Icon.“PICTURE MODE” is highlighted.Press / buttons to move to “COLOR TONE”.Press / buttons, then the menu changes in the following order.➛STANDARD ➛WARM ➛COOL ➛Press EXIT button to TV viewing or press MENU button to return to the previousmenu.♦ STANDARD : For a general Color Tone.♦ WARM : For warm colors with reddish tone.♦ COOL : For cool colors with bluish tone.How to Set the Desired Picture in PC, DVI/HDMI Input ModesUsers can adjust Color as users want.How to Select a Color TemperatureUsers can adjust Color as users want.11345227Picture Setup342
ENGLISH28Picture SetupHow to Set the Display ScaleUsers can adjust the display scale as they wantPress MENU button.Menu items appear on the screen.Press button to select “Picture” Icon.“PICTURE MODE” is highlighted.Press / buttons to move to “SCALE”.Press / buttons, then the mode change in the following order.➛WIDE ➛ZOOM1 ➛ZOOM2 ➛4:3 ➛14:9 ➛Press EXIT button to TV viewing or press MENU button to return to the previousmenu.♦ WIDE - General broadcast picture is adjusted to 16:9. ♦ ZOOM 1 - Picture enlarged to 16:9 format, letter box format.♦ ZOOM 2 - Zoom in 16:9 in vertical direction♦ 4:3 - 4:3 general picture size♦ 14:9 - 14:9 picture size13452Press MENU button.Menu items appear on the screen.Press button to select “Picture” Icon.“PICTURE MODE” is highlighted.Press / buttons to move to “NOISE REDUCT”.Press / buttons to set ON/OFF .Press EXIT button to TV viewing or press MENU button to return to the previousmenu.12How to Set Noise ReductionUser can eliminate noises on the screen in Video mode345

Navigation menu