Hyundai IBT SLIMVIEW727 17-inch LCD Monitor User Manual

Hyundai IBT Corp. 17-inch LCD Monitor Users Manual

Users Manual

SlimView 727User’s Guide
U.S.A.U.S.FEDERAL COMMUNICATIONS COMMISSIONRADIO FREQUENCY INTERFERENCE STATEMENTINFORMATION TO THE USERNOTE : This equipment has been tested and found to comply with the limits for aClass B digital device pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmfulinterference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, ifnot installed and used in accordance with the instructions, may cause harmfulinterference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet of a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for assistance.Changes or modification not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.Connecting of peripherals requires the use of grounded, shielded signal cables.
ENGLISHPlease check your power cord before installation if it is UL listed one.FRANÇAISVeuillez vérifier que votre cordon d'alimentation soit homologué UL avantl'installation.ITALIANOPrima di installare controllare che il cavo di alimentazione sia approvato UL.DEUTSCHBitte prüfen Sie vor der Installation des Netzkabels, ob es in der UL-Listeaufgeführt ist.ESPAÑOLCompruebe el cable de potencia antes de la instalación si es uno de la listaUL.
ENGLISHTable of ContentsIntroduction ................................................................................................. 1Safety Information ..................................................................................... 1Installing the monitor ............................................................................... 3Packing List ............................................................................................................... 3Selecting a suitable location..................................................................................... 4Connecting the monitor........................................................................................... 4USB hub..................................................................................................................... 5Setting the refresh rate............................................................................................. 6Preset Timing tabel ............................................................................................... 6Adjusting the picture ................................................................................ 7Using the On Screen Display .................................................................................. 7Direct access buttons............................................................................................... 8OSD Adjustments ..................................................................................................... 8Display Power management ...................................................................10Reducing power consumption ................................................................................10Troubleshooting .........................................................................................11Specifications ..............................................................................................13
1ENGLISHIntroductionThis manual contains instructions for installing and operating LT17u.LT17u is a highly ergonomic color display unit.• 17" viewable SXGA LCD• High quality screen re-scaling capability• 100-240V AC input voltage• VESA DPMS (Display Power Management Signalling)• VESA DDC1/2B compatibility• Advanced digital On-Screen-Display controls• Fast and accurate auto adjustment• Most advanced image scaling• Supporting VESA Flat Panel Monitor Physical Mounting Interface• 1up X 4down USB hubSafety InformationThis Monitor has been engineered and manufactured to assure your safety.You can prevent serious electrical shock and other hazards by keeping in mind thefollowing:Do not place anything wet on the monitor or the powercord. Never cover the ventilation openings with anymaterial and never touch them with metallic orinflammable materials.Avoid operating the monitor in extreme heat, humidity or areas affected by dust.• Temperature : 5~35°C • Humidity : 30~80RHBe sure to turn the monitor off before plugging the powercord into the socket. Make sure that the power cord andthe other cords are securely and rightly connected.
User's Guide ENGLISH2Overloaded AC outlets and extension cords aredangerous, as are frayed power cords and broken plugs,which may cause electric shock or fire. Call your servicetechnician for replacement.Do not use sharp tools such as a pin or a pencil nearthe monitor, as they may scratch the LCD surface.Do not use a solvent, such as benzene,to clean the monitor, as it will damage the LCD surface.Cleaning and maintenance• To avoid risk of electric shock, do not disassemble the display unit cabinet. Theunit is not user-serviceable. Remember to unplug the display unit from the poweroutlet before cleaning.• Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not usethinner or benzene, abrasive cleaners or compressed air.• Do not wipe the screen with a cloth or sponge that could scratch the surface.• To clean your antistatic screen, use water and a special microfiber screen cleaningtissue used in optical lens cleaning, or lightly dampen a soft, clean cloth with wateror a mild detergent.• If the instructions above do not help in removing stains, contact an authorizedservice agent.
3ENGLISHInstalling the monitorPacking ListThe following items should be found in the packaging.Above power cord can be changed upon different voltage areas. Please contactyour dealer if anything is missing or damaged.!User's GuideAttached Signal Cable / USB Cable
User's Guide ENGLISH4Selecting a suitable location• Place the monitor at least 30cm from other electrical or heat-emitting equipmentand allow at least 10cm on each side for ventilation.• Place the monitor in a position where no light shines directly onto or is reflectedon the screen.• To reduce eye strain, avoid installing the display unit against a bright backgroundsuch as a window.• Position the monitor so that the top of the screen is no higher than eye level.• Position the monitor directly in front of you at a comfortable reading distance(around 45 to 90cm)Connecting the monitorBefore you start cabling your monitor, check that thepower is off on all units. To avoid any possibility ofelectric shock, always connect your equipment toproperly earthed outlets.!
5ENGLISH1. Insert the other 15-pin signal cable connector into the 15-pin VGA connection onyour computer and screw it down.2. Plug the power cord connection to connection on the monitor.3. Plug the other end of the power cord to your computer's main supply or to a100V-240V earthed electrical outlet.4. Turn on the monitor using the power switch and check that the power LED is on.If not, repeat steps 1,2,3 and 4 or refer to the Troubleshooting section of thisguide.5. Turn on the power to the computer. The picture will appear within about 10seconds. Adjust the picture to obtain optimum picture quality. See sectionAdjusting the picture in this guide for more information.USB hubThe USB hub have 1 upstream port and 4 downstream ports. The upstream port canbe connected to the root hub of host PC or other downstream port. Four(4)downstream ports allow to connect another USB device such as USB mouse, joystick,printer etc.LED IndicatorUSB 4 downstream portsPower Switch
User's Guide ENGLISH6Setting the refresh rateFollow the instructions below to set your refresh rate in Windows 98/ME/XP/2000.1. Go to the configuration window(Start-Settings-Configuration window).2. Double click on the ‘Display’ icon.3. Click on the ‘Settings’ tab.4. Click on the ‘Advanced’ button.5. Click on ‘Adapter’ and select 60Hz from the list.6. Click on ‘Apply’ to accept the selected value.Preset Timing TableIf the signal from the system doesn't equal to the preset timing mode, adjustthe mode with reference to the user guide of videocard because the screenmay not be displayed.The recommended setting is a resolution of 1280x1024 and a refresh rate of 60Hz.!!No.12345678910Resolution720 x 400640 x 480640 x 480800 x 600800 x 6001024 x 7681024 x 7681024 x 7681280 x 10241280 x 1024Horizontal Frequency31.5 KHz31.5 KHz37.5 KHz37.9 KHz46.9 KHz48.4 KHz56.5 KHz60.0 KHz63.9 KHz80.0 KHzRefresh rate70.0 Hz60.0 Hz75.0 Hz60.0 Hz75.0 Hz60.0 Hz70.0 Hz75.0 Hz60.0 Hz75.0 Hz
7ENGLISHAdjusting the pictureYou can adjust the screen display by using the buttons located below the screen.Using the On Screen Display1. Push the MENU button to call the OSD to the screen. The resolution andfrequency are displayed at the top of the menu box for your information.2. Push the or button to choose the item you want to adjust.The selected item is highlighted.3. Push the SELECT button to adjust the highlighted item.4. Use the or button to adjust the selection.5. Push the MENU button to return to the previous menu if you are in a submenu.6. The display unit automatically saves the new settings in 1 second after your lastadjustments and the menu disappears. You can also push the MENU button tomake the menu disappear.
User's Guide ENGLISH8Direct access buttonsAUTO ADJUSTPush the button SELECT (AUTO) to adjust the shape of screenautomatically.BRIGHTNESSUse the button to select the brightness adjustment. Adjust with or button.CONTRASTUse the button to select the contrast adjustment. Adjust with or button.OSD AdjustmentsThe OSD adjustments available to you are listed below.BRIGHTNESSAdjusts the brightness of the screen.CONTRASTAdjusts the contrast of the screen.COLOR CONTROLColor temperature affects the tint of the image. With lower colortemperatures the image turns reddish and with higher temperaturesbluish.There are three color settings available: Mode 1(a warm white), Mode2(a cool white) or USER. With the USER setting you can set individualvalues for red, green and blue.MISCELLANEOUSRECALLRecall the saved color data.OSD TIMERYou can set the displayed time of OSD Menu window on the screen byusing this adjustment.OSD POSITIONAdjust the OSD menu's horizontal or vertical position on the screen.
9ENGLISHAUTO ADJUSTYou can adjust the shape of screen automatically at the full screenpattern.LANGUAGEYou can select the language in which adjustment menus are displayed.The following languages are available : English, French, German, Italian,Spanish, Swedish, Finnish, Danish, Portuguese and Dutch.H/V POSITIONH-POSITIONAdjusts the horizontal position of the entire screen image.V-POSITIONAdjusts the vertical position of the entire screen image.CLOCK PHASEPHASEAdjust the noise of the screen image.CLOCKAdjust the horizontal size of the entire screen image.
User's Guide ENGLISH10Display power managementIf the power management function of your computer is enabled, your monitor turnson and off automatically. You can control power management features from yourcomputer.Reducing power consumptionYour computer may have power management features which enable the computer ormonitor to enter a power saving mode when the system is idle. You can reactivate thesystem by pressing any key or moving the mouse.The power button does not disconnect the monitor from the mains. The onlyway to isolate the monitor completely from the mains supply is to unplug themains cable.Mode LED Power consumptionNormal Green 40 WSuspend Orange 10 WOff Orange 5 WUnplugged Not illuminated 0 W!
11ENGLISHTroubleshootingIf your monitor is not functioning properly, you may be able to solve the problemby following the suggestions below :ProblemBlank screenError message:Video mode notsupportedThe display does not enter power managementmodeColor defectsSize, position,shape or qualityunsatisfactoryDuplicatedimagesPossible solutionIf the power LED is not lit, push the Soft power switch to turn themonitor on. If the display unit is powered through the computer,check that the computer is switched on.The display unit might be in power saving mode. Push one ofthe keyboard keys. Check that the keyboard is properlyconnected to the computer.Check that the signal cable connector is properly connected andthat the connection pins are not bent or damaged. If theconnector is loose, tighten the connector's screws.Check that the power cable is correctly connected to the displayunit and to the power outlet.Check the resolution and the frequency on the video port of yourcomputer.Compare these values with the data in the Preset Timing Table.The video signal from the computer does not comply with VESADPMS standard. Either the computer or the graphics adapter isnot using the VESA DPMS power management function.Check that the signal cable connector is properly connected andthat the connection pins are not bent or damaged. Try anothercolor temperature.Adjust the picture characteristics as described in the sectionOSD Adjustment(4-3).A problem with your graphics adapter or display unit. Contactyour service representative.
User's Guide ENGLISH12Contacting serviceIf the above troubleshooting hints do not help you find a solution to the problem,contact an authorized service agent. If the monitor is sent for service, use the originalpackage if possible.Unplug the display unit from the power outlet and contact a service agent when:• The monitor does not operate normally according to the operating instructions.• The monitor exhibits a distinct change in performance.• The monitor has been dropped or the cabinet has been damaged.• The monitor has been exposed to rain, or water or liquid has been spilled onto themonitor.ProblemImage is notstableMessage :Check SignalCableMessage :No signalThe power LED isa orange colorPossible solutionCheck that the display resolution and frequency from your PC orgraphic adapter is an available mode for your monitor.In your PC, you can check through Control panel, Display,Settings.If the setting is not correct, use your computer utility program tochange the display settings.Check that the signal cabel connector is properly connected andthat the connection pins are not bent or damaged.If the connector is loose, tighten the connector’s screws.Check that the computer is switched on.Check the signal source.To enter a power saving mode. You can reactivate the system bypressing any key or moving the mouse.LED Indicator can be orange color on changing of video mode orInput Signal.Check the Resolution and the frequency on the video part ofyour computer. Compare these values with the data in the PresetTiming Table.
13ENGLISHSpecifications• Specification is subject to change without notice for performance improvement.LCDBrightnessResponse TimeDisplay areaNumber of colorInput signalsFrequency rateMaximum bandwidthMaximum resolutionRecommanded resolutionInput voltagePower consumptionPower ManagementPlug & PlayOSD menuUSBVESA FPMPMIErgonomics,Safety and EMCOperating TemperatureWeightDimensions (W X H X D mm)17"viewable, Diagonal, Pixel pitch 0.264 mm, A-Si TFT250cd/m220msec 337.92 X 270.336 mm16.2 Million colors R.G.B Analog, 15 pin D-subHorizontal : 31.0 to 80.0KHz, Vertical : 56 to 75Hz135 MHz1024X768@75Hz1024X768@60Hz100 - 240 V AC45WVESA DPMSVESA DDC 1/2BBRIGHTNESS, CONTRAST, COLOR CONTROL,MISCELLANEOUS, AUTO ADJUST, LANGUAGE,H/V POSITION, CLOCK PHASE1up X 4down100 mm X 100 mm screw mountingTCO’99, FCC Class B, CE, cULus, TÜV-GS, SEMKO5 ~ 35OC6.9Kg unpacked, 8.0Kg packed285 X 500 X 495 mm
User's Guide ENGLISH14

Navigation menu