Hyundai IBT SLIMVIEW727 17-inch LCD Monitor User Manual
Hyundai IBT Corp. 17-inch LCD Monitor Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 253310 |
| Application ID | y1knPBCGe1NK9vmtTPbTaA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 23.77kB (297077 bits) |
| Date Submitted | 2002-06-28 00:00:00 |
| Date Available | 2002-06-28 00:00:00 |
| Creation Date | 2002-05-24 15:41:58 |
| Producing Software | Acrobat Distiller 4.0 for Macintosh |
| Document Lastmod | 2002-05-29 15:14:01 |
| Document Title | Users Manual |
SlimView 727 User’s Guide U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet of a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for assistance. Changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Connecting of peripherals requires the use of grounded, shielded signal cables. ENGLISH Please check your power cord before installation if it is UL listed one. FRANÇAIS Veuillez vérifier que votre cordon d'alimentation soit homologué UL avant l'installation. ITALIANO Prima di installare controllare che il cavo di alimentazione sia approvato UL. DEUTSCH Bitte prüfen Sie vor der Installation des Netzkabels, ob es in der UL-Liste aufgeführt ist. ESPAÑOL Compruebe el cable de potencia antes de la instalación si es uno de la lista UL. Table of Contents ENGLISH Introduction................................................................................................. 1 Safety Information ..................................................................................... 1 Installing the monitor ............................................................................... 3 Packing List ............................................................................................................... 3 Selecting a suitable location..................................................................................... 4 Connecting the monitor........................................................................................... 4 USB hub..................................................................................................................... 5 Setting the refresh rate............................................................................................. 6 Preset Timing tabel............................................................................................... 6 Adjusting the picture ................................................................................ 7 Using the On Screen Display .................................................................................. 7 Direct access buttons............................................................................................... 8 OSD Adjustments..................................................................................................... 8 Display Power management ...................................................................10 Reducing power consumption ................................................................................10 Troubleshooting .........................................................................................11 Specifications ..............................................................................................13 Introduction This manual contains instructions for installing and operating LT17u. • • • • • • • • • • ENGLISH LT17u is a highly ergonomic color display unit. 17" viewable SXGA LCD High quality screen re-scaling capability 100-240V AC input voltage VESA DPMS (Display Power Management Signalling) VESA DDC1/2B compatibility Advanced digital On-Screen-Display controls Fast and accurate auto adjustment Most advanced image scaling Supporting VESA Flat Panel Monitor Physical Mounting Interface 1up X 4down USB hub Safety Information This Monitor has been engineered and manufactured to assure your safety. You can prevent serious electrical shock and other hazards by keeping in mind the following: Do not place anything wet on the monitor or the power cord. Never cover the ventilation openings with any material and never touch them with metallic or inflammable materials. Avoid operating the monitor in extreme heat, humidity or areas affected by dust. • Temperature : 5~35°C • Humidity : 30~80RH Be sure to turn the monitor off before plugging the power cord into the socket. Make sure that the power cord and the other cords are securely and rightly connected. User's Guide ENGLISH Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and broken plugs, which may cause electric shock or fire. Call your service technician for replacement. Do not use sharp tools such as a pin or a pencil near the monitor, as they may scratch the LCD surface. Do not use a solvent, such as benzene, to clean the monitor, as it will damage the LCD surface. Cleaning and maintenance • To avoid risk of electric shock, do not disassemble the display unit cabinet. The unit is not user-serviceable. Remember to unplug the display unit from the power outlet before cleaning. Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner or benzene, abrasive cleaners or compressed air. Do not wipe the screen with a cloth or sponge that could scratch the surface. To clean your antistatic screen, use water and a special microfiber screen cleaning tissue used in optical lens cleaning, or lightly dampen a soft, clean cloth with water or a mild detergent. If the instructions above do not help in removing stains, contact an authorized service agent. • • • • Installing the monitor Packing List ENGLISH The following items should be found in the packaging. User's Guide Attached Signal Cable / USB Cable Above power cord can be changed upon different voltage areas. Please contact your dealer if anything is missing or damaged. User's Guide Selecting a suitable location • Place the monitor at least 30cm from other electrical or heat-emitting equipment and allow at least 10cm on each side for ventilation. Place the monitor in a position where no light shines directly onto or is reflected on the screen. To reduce eye strain, avoid installing the display unit against a bright background such as a window. Position the monitor so that the top of the screen is no higher than eye level. Position the monitor directly in front of you at a comfortable reading distance (around 45 to 90cm) • ENGLISH • • • Connecting the monitor Before you start cabling your monitor, check that the power is off on all units. To avoid any possibility of electric shock, always connect your equipment to properly earthed outlets. 2. 3. 4. Insert the other 15-pin signal cable connector into the 15-pin VGA connection on your computer and screw it down. Plug the power cord connection to connection on the monitor. Plug the other end of the power cord to your computer's main supply or to a 100V-240V earthed electrical outlet. Turn on the monitor using the power switch and check that the power LED is on. If not, repeat steps 1,2,3 and 4 or refer to the Troubleshooting section of this guide. USB 4 downstream ports LED Indicator 5. Power Switch Turn on the power to the computer. The picture will appear within about 10 seconds. Adjust the picture to obtain optimum picture quality. See section Adjusting the picture in this guide for more information. USB hub The USB hub have 1 upstream port and 4 downstream ports. The upstream port can be connected to the root hub of host PC or other downstream port. Four(4) downstream ports allow to connect another USB device such as USB mouse, joystick, printer etc. ENGLISH 1. User's Guide Setting the refresh rate Follow the instructions below to set your refresh rate in Windows 98/ME/XP/2000. ENGLISH 1. 2. 3. 4. 5. 6. Go to the configuration window(Start-Settings-Configuration window). Double click on the ‘Display’ icon. Click on the ‘Settings’ tab. Click on the ‘Advanced’ button. Click on ‘Adapter’ and select 60Hz from the list. Click on ‘Apply’ to accept the selected value. Preset Timing Table If the signal from the system doesn't equal to the preset timing mode, adjust the mode with reference to the user guide of videocard because the screen may not be displayed. The recommended setting is a resolution of 1280x1024 and a refresh rate of 60Hz. No. Resolution Horizontal Frequency Refresh rate 720 x 400 31.5 KHz 70.0 Hz 640 x 480 31.5 KHz 60.0 Hz 640 x 480 37.5 KHz 75.0 Hz 800 x 600 37.9 KHz 60.0 Hz 800 x 600 46.9 KHz 75.0 Hz 1024 x 768 48.4 KHz 60.0 Hz 1024 x 768 56.5 KHz 70.0 Hz 1024 x 768 60.0 KHz 75.0 Hz 1280 x 1024 63.9 KHz 60.0 Hz 10 1280 x 1024 80.0 KHz 75.0 Hz Adjusting the picture ENGLISH You can adjust the screen display by using the buttons located below the screen. Using the On Screen Display 1. Push the MENU button to call the OSD to the screen. The resolution and frequency are displayed at the top of the menu box for your information. 2. Push the or button to choose the item you want to adjust. The selected item is highlighted. Push the SELECT button to adjust the highlighted item. 3. 4. 5. 6. Use the or button to adjust the selection. Push the MENU button to return to the previous menu if you are in a submenu. The display unit automatically saves the new settings in 1 second after your last adjustments and the menu disappears. You can also push the MENU button to make the menu disappear. User's Guide Direct access buttons AUTO ADJUST Push the button SELECT (AUTO) to adjust the shape of screen automatically. ENGLISH BRIGHTNESS Use the button Adjust with to select the brightness adjustment. or button. CONTRAST Use the button Adjust with to select the contrast adjustment. or button. OSD Adjustments The OSD adjustments available to you are listed below. BRIGHTNESS Adjusts the brightness of the screen. CONTRAST Adjusts the contrast of the screen. COLOR CONTROL Color temperature affects the tint of the image. With lower color temperatures the image turns reddish and with higher temperatures bluish. There are three color settings available: Mode 1(a warm white), Mode 2(a cool white) or USER. With the USER setting you can set individual values for red, green and blue. MISCELLANEOUS RECALL Recall the saved color data. OSD TIMER You can set the displayed time of OSD Menu window on the screen by using this adjustment. OSD POSITION Adjust the OSD menu's horizontal or vertical position on the screen. LANGUAGE You can select the language in which adjustment menus are displayed. The following languages are available : English, French, German, Italian, Spanish, Swedish, Finnish, Danish, Portuguese and Dutch. H/V POSITION H-POSITION Adjusts the horizontal position of the entire screen image. V-POSITION Adjusts the vertical position of the entire screen image. CLOCK PHASE PHASE Adjust the noise of the screen image. CLOCK Adjust the horizontal size of the entire screen image. ENGLISH AUTO ADJUST You can adjust the shape of screen automatically at the full screen pattern. User's Guide Display power management If the power management function of your computer is enabled, your monitor turns on and off automatically. You can control power management features from your computer. ENGLISH Reducing power consumption Your computer may have power management features which enable the computer or monitor to enter a power saving mode when the system is idle. You can reactivate the system by pressing any key or moving the mouse. Mode LED Power consumption Normal Green 40 W Suspend Orange 10 W Off Orange 5W Unplugged Not illuminated 0W 10 The power button does not disconnect the monitor from the mains. The only way to isolate the monitor completely from the mains supply is to unplug the mains cable. Troubleshooting Problem Blank screen Possible solution If the power LED is not lit, push the Soft power switch to turn the monitor on. If the display unit is powered through the computer, check that the computer is switched on. The display unit might be in power saving mode. Push one of the keyboard keys. Check that the keyboard is properly connected to the computer. Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. If the connector is loose, tighten the connector's screws. Check that the power cable is correctly connected to the display unit and to the power outlet. Error message: Video mode not supported Check the resolution and the frequency on the video port of your computer. Compare these values with the data in the Preset Timing Table. The display does not enter power management mode The video signal from the computer does not comply with VESA DPMS standard. Either the computer or the graphics adapter is not using the VESA DPMS power management function. Color defects Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. Try another color temperature. Size, position, shape or quality unsatisfactory Adjust the picture characteristics as described in the section OSD Adjustment(4-3). Duplicated images A problem with your graphics adapter or display unit. Contact your service representative. 11 ENGLISH If your monitor is not functioning properly, you may be able to solve the problem by following the suggestions below : User's Guide Possible solution Problem Image is not stable ENGLISH Check that the display resolution and frequency from your PC or graphic adapter is an available mode for your monitor. In your PC, you can check through Control panel, Display, Settings. If the setting is not correct, use your computer utility program to change the display settings. Message : Check Signal Cable Check that the signal cabel connector is properly connected and that the connection pins are not bent or damaged. If the connector is loose, tighten the connector’s screws. Check that the computer is switched on. Message : No signal Check the signal source. To enter a power saving mode. You can reactivate the system by pressing any key or moving the mouse. The power LED is LED Indicator can be orange color on changing of video mode or Input Signal. a orange color Check the Resolution and the frequency on the video part of your computer. Compare these values with the data in the Preset Timing Table. Contacting service If the above troubleshooting hints do not help you find a solution to the problem, contact an authorized service agent. If the monitor is sent for service, use the original package if possible. Unplug the display unit from the power outlet and contact a service agent when: • • • • The monitor does not operate normally according to the operating instructions. The monitor exhibits a distinct change in performance. The monitor has been dropped or the cabinet has been damaged. The monitor has been exposed to rain, or water or liquid has been spilled onto the monitor. 12 Specifications Response Time Display area Number of color Input signals Frequency rate 17"viewable, Diagonal, Pixel pitch 0.264 mm, A-Si TFT 250cd/m2 20msec ENGLISH LCD Brightness 337.92 X 270.336 mm 16.2 Million colors R.G.B Analog, 15 pin D-sub Horizontal : 31.0 to 80.0KHz, Vertical : 56 to 75Hz Maximum bandwidth 135 MHz Maximum resolution 1024X768@75Hz Recommanded resolution 1024X768@60Hz Input voltage 100 - 240 V AC Power consumption 45W Power Management VESA DPMS Plug & Play VESA DDC 1/2B BRIGHTNESS, CONTRAST, COLOR CONTROL, OSD menu MISCELLANEOUS, AUTO ADJUST, LANGUAGE, H/V POSITION, CLOCK PHASE USB 1up X 4down VESA FPMPMI 100 mm X 100 mm screw mounting Ergonomics, TCO’99, FCC Class B, CE, Safety and EMC Operating Temperature Weight cULus, TÜV-GS, SEMKO 5 ~ 35OC 6.9Kg unpacked, 8.0Kg packed Dimensions (W X H X D mm) 285 X 500 X 495 mm • Specification is subject to change without notice for performance improvement. 13 User's Guide ENGLISH 14
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2002:05:24 15:41:58 Producer : Acrobat Distiller 4.0 for Macintosh Modify Date : 2002:05:29 15:14:01+09:00 Page Count : 18EXIF Metadata provided by EXIF.tools