Hyundai Imagequest Hql170Wr Users Manual 1_20PAL_General

HQL170WR to the manual cf44f07d-c9e3-5f84-2912-e6f96c785f08

2015-01-23

: Hyundai Hyundai-Imagequest-Hql170Wr-Users-Manual-221836 hyundai-imagequest-hql170wr-users-manual-221836 hyundai pdf

Open the PDF directly: View PDF .
Page Count: 83

Download
Open PDF In Browser	View PDF

H
Y
U
N
D
A
I

USA

M
A
G

AVC USA. INC.
777 Mark Street, Wood Dale, IL 60191
Tel : 630-595-0123 / 800-568-0060
Fax : 630-595-2345 / 800-784-9422
e-mail : avctech@avcusa.com

Hyundai ImageQuest America
3101 North First Street San Jose, CA 95134
Hyundai tech support
Tel : +800-568-0061,408-232-8654
Fax : +408- 232-8146
e-mail : syuen@hyundaiqa.com

NEW ZEALAND

E
Q
U

TRANSTECH DISTRIBUTORS Ltd.
PO Box 12985 Penrose,
Auckland New Zealand
Tel : 09-571-0775
Fax : 09-571-0776
e-mail : LouisG@Transtech.co.nz
WWW : www.transtech.co.nz

AUSTRALIA

D
T
V

P/N 632 0238 302 Rev.00

Hyundai ImageQuest JAPAN
Shin-Hibiya Bldg, East 5F 1-3-6
Uchisaiwai-Cho, Chiyoda-ku,
Tokyo, Japan 100-0011
Tel : 03-5157-2286
Fax : 03-5157-2284
e-mail : pjkim@iqt.co.kr
C/S P.J.Kim

JAPAN

Hyundai ImageQuest Europe GmbH
Geheimrat Hummel Platz 2
65239, Hochheim, Germany
Tel : 06146 / 904 444
Fax : 06146 / 904 410
e-mail : service@hyundaiq.de
WWW : www.hyundaiq.com

GERMANY

Thomas Electronics Australia Pty Ltd.
3 Sheridan Close
Milperra NSW 2214, Australia
Tel : +61 2 9773 7400
Fax : 61 2 9773 7177
Attn : Ms. Shiely Poniman

Model. HQL170WR/200NR

User's Guide
* The above image may look different from the real product.

GENERAL INFORMATION

FCC Information

User Instructions
The Federal Communications Commission Radio Frequency Interference Statement includes the
following warning :
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television receptions, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures :
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for assistance.

User Information
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Connecting of peripherals requires the use of grounded shielded signal cables.

HYUNDAI LCD TV HQL170WR/200NR

HYUNDAI ImageQuest CO., LTD.
Ami-ri Bubal-Eub Ichon-Si Kyungki-Do
467-860 KOREA

declare under our sole responsibility that the product:
Kind of equipment : LCD TV

Type-Designation

: LT17AW000 / LT20A0000

to which this declaration relates is in conformity with the
following standard(s) or other normative document(s)
Safety : EN60065 : 1998/IEC60065:1998
EMC : EN 55013 /1990+A12 : 1994+A13 : 1996+A14 : 1999
EN 55022 : 1998+A1 : 2000 Class B
EN 55024 : 1998+A1 : 2001
EN 55020 : 1994+A11 : 1996+A13 : 1996+A14 : 1999+A12 : 1999
EN 61000-3-2 : 2000, EN 61000-3-3 : 1995+A1 : 2001
following the provisions of the Low Voltage Directive 73/23/EEC,
93/68/EEC and the EMC Directive 89/336/EEC.
Accredited testlaboratory:
TÜV Rheinland
Am Grauen Stein
51105 Köln

KOREA /MAY. 15, 2004
Place and date of issue)

HONG KI, KIM
(Name and signature of
authorized person)

GENERAL INFORMATION

DECLARATION OF CONFORMITY

Important Tips

Image Retention Effect(Image Sticking) 
1. Cause :
- If LCD TV displays the same pattern for a long period of time, Image Retention Effect may develop
due to the LCD structure.
- This is a common phenomenon that occurs in all LCD products on current market.
2. Prevention :
- To avoid this matter, use the product after reducing brightness and contrast, especially when a still
image is displaying for a long time. (Example : Contrast 25, Brightness 25 - See the page 34)
Once Image retention occurs, change the mode into Video mode which displays more motion
pictures. It will help reduce this effect, but cannot completely eliminate the effect once it occurs.
When a fixed pattern is displayed often, screen brightness may get worse.
3. Solution :
- Displaying a full white pattern for around 10 hours might help reduce latent image effect temporarily.
- It is not possible to permanently prevent Image Sticking Effect using current technology.
4. Notice :
- It is very important to notify every buyer/customer of this information and all distributors/buyers/
customers should be fully aware of this.
- A manufacturer cannot provide a technical support of Image Sticking Effect of LCD TV. And Warranty
does not include Image Sticking Effect.

HYUNDAI LCD TV HQL170WR/200NR

Image Sticking Precaution

Still Image Wide/4:3 in Motion Image 

Wide, 4:3 aspect ratio

Box or Still image

• Precaution :
- Image Sticking could be come from Still Image and Boundary line for a long time display and
Brightness gap in Boundary.
- This Matter(Image Sticking) is same thing under the other LCD TV's Company.
- Still Image/Letter in watching TV also will be effect to Image sticking.
*This matter(Image Sticking) is out of warranty.

Features

A Wide Array of Screen Settings
You can choose different screen settings depending on the type of program you are watching
or the surrounding conditions (the lighting or the outside weather conditions).
You can switch among Dynamic, Mild and Standard, or you can configure the screen settings
for yourself.

A Wide Array of Sound Settings
You can choose an optimal sound setting for the type of program you are watching.
You can switch among Standard, Music, Movie and News, or you can configure the settings for
yourself.

Various Screen Sizes
Standard (4:3), Widescreen (16:9) and Zoom are available.
PIP (Picture In Picture), POP (Picture Of Picture) are Multi(9 screens) functions are provided.

Teletext Function
You can display teletext information at any time on your TV.

Surround Audio Function
You can listen to dynamic and surround sound only with ordinary speakers.

Auto ON/OFF Function
This function allows you to turn on/off your LCD TV at the preset time.

HYUNDAI LCD TV HQL170WR/200NR

Table of Contents
General Information

How to Set the Audio Mode(Equalize) ..................................42

Safety Precaution .................................................................5

How to Set the Desired Audio .............................................43

Contents of the Package .....................................................11

How to Listen to Stereo Sound / Dual Sound .......................44

Separately Sold Products ....................................................11

How to Select the Surround ................................................46

How to Use the Kensington Security Slot ............................12

How to Select AVL .............................................................47

How to Use the Rear Cap and Cable Holder .........................13

How to Select the Sound Swap ...........................................48

How to Adjust the View Angle .............................................14
How To Install Wall Mount Support .....................................15

PC Setup

Parts Names and Functions ................................................17

How to Select the Color Mode .............................................51

Remote Control ..................................................................19

How to Select the Auto Adjust .............................................52
How to Set the Geometry ....................................................53

Connections
Connecting Indoor/Outdoor TV Antenna(UHF/VHF) ...............23

TV Setup

Connecting to the Antenna Input Connection

How to Store Program Automatically ...................................55

on the External Equipment ..................................................24

How to Set Manual Store ....................................................56

Connecting a VCR, Cable/Satellite Receiver .......................25

How to Directly Select the PR LIST ......................................59

Connecting a DTV Receiver or DVD Player ..........................26
Playing Back a Tape Recorded On a Camcorder .................27

Option Setup

Connecting to a PC .............................................................28

Choosing Your Language ....................................................61

Resolutions Supported in PC ..............................................29

How to Set OSD(On-Screen-Display) Display Time ..............62

Scart Connection to the External Input/Output .....................30

How to Select the OSD Background ....................................63

Scart Pin Specifications ......................................................31

How to Set Sleep Time .......................................................64
How to Set Clock ................................................................65

Picture Setup

How to Set On /Off Time .....................................................66

How to Select the Picture Mode ..........................................33

How to Set Key-Lock ..........................................................68

How to Set the Desired Picture ...........................................34

Displaying Information ........................................................69

How to Set Noise Reduction ................................................35

Teletext Feature .................................................................71

How to Set PIP [Mode] ........................................................36

Displaying the Teletext Information .....................................72

How to Set POP [Mode] ......................................................36

Selecting Display Options ...................................................72

How to Set Multi [Mode] .....................................................37
How to Freeze Picture .........................................................38

Appendix

How to Select the Aspect Ratio ...........................................39

Troubleshooting ..................................................................75
Care and Cleaning ..............................................................77

Audio Setup
How to Select the Volume, Balance and Mute .....................41

Product Specifications ........................................................78

GENERAL INFORMATION

Safety Precaution
The contents of this section are provided for the safety of users and their property.
Please read the instructions carefully before using.

WARNING

If there is a persistent accumulation
of dusts or water on the plug, please
make sure to wipe it off using a dry
cloth.
- It may cause a fire or an electric shock.

Do not connect multiple electrical
appliances to a single outlet.
- It may cause a fire due to overheating from the
outlet.

WARNING

Do not install in a place where there
is oil, smoke, excessive humidity, or
where water may be sprinkled,
dripped, splashed on it.
- This may cause electric shock or fire.

Do not put a water bowl, vase,
candle, bug repellant smoke,
cigarette, plants, or heavy thing on
the LCD TV.
- It may cause electric shock or fire and also
heavy things may cause injury when they fall.

HYUNDAI LCD TV HQL170WR/200NR

GENERAL INFORMATION

Safety instructions are divided into “Warning” and “Alert”. Their meanings are as follows.
This icon is intended to alert the user to the presence of potential danger and important operating instructions.
Warning : When there is a possibility of serious injury or death if not observed.
Alert : When there is a possibility of slight injury or product damage if not observed.

Do not use a damaged
power cord or plug, or loose
outlet.

Please avoid touching the panel
at the rear of LCD TV as it is
producing high temperature.

- They may cause electric shock or fire.

- Direct contact with the hot surface may
cause physical burns.

Firmly plug in the power
cord so that it does not pull
out.
- An unstable connection may cause
fire.

Never touch the power plug
or outlet with wet hands.
- This may cause electric shock.

Do not use or store a flammable
spray or inflammable things near the
LCD TV.
- They may cause explosion or fire.

Do not install on an unstable place
or small support.

Do not install the LCD TV in a
bookshelf, closet, or a place where
there is poor air circulation.

- This may cause the LCD TV to fall, resulting in
serious injury to a child or adult.

- Fire may be caused due to the rise of internal
temperature.

GENERAL INFORMATION

Safety Precaution ....................................Continued from previous page
The contents of this section are provided for the safety of users and their property.
Please read the instructions carefully before using.

WARNING

Never attempt to open, fix, or modify
the LCD TV.
- When there is a need for fixing, call a service
center. Fire or electric shock may be caused.

Make the antenna cable loop at the entrance
of the building. Any necessary action such as
making the antenna cable loop at the
entrance of the building should be taken to
prevent rainwater on the outdoor antenna
cable from possibly running into the indoor.
- If raindrop gets into the LCD TV, it may cause a
fire or an electric shock.

WARNING

Do not block ventilating slits.
- Blocking the ventilation slits prevents inner heat
from escaping, which may lead to a fire.

Do not place any heat sources such
as radiators and heat registers, etc.
on or near the LCD TV.
- It may cause a fire.

HYUNDAI LCD TV HQL170WR/200NR

GENERAL INFORMATION

When the LCD TV produces abnormal
noise, burning smell, or smoke,
unplug the LCD TV immediately and
call a service center.
- Electric shock or fire may be caused.

Do not put a metallic object like
chopstick, wire, or puncher or
inflammables like paper or a match
in a vent, headphone jack, or AV
jacks of the LCD TV.

Ensure the power cord
doesn’t trail across any hot
objects like a heater.
- This may cause a fire or an electric shock.

- Electric shock or fire may be caused.

Unplug the product during lightning
or thunderstorms and never touch
the antenna cable.
- It may cause a fire or an electric shock.

Do not install the product on the
floor.
- If it falls over, your child may be injured.

Keep the remote control batteries
out of sight and out reach of
children.
- If your child swallows a battery, see your doctor
immediately.

GENERAL INFORMATION

WARNING

Do not place toys and cookies, etc.
on the LCD TV, which may attract
children’s attention. Children will
climb on the LCD TV to reach
whatever they have their eyes on.
- If it falls over on children, it may cause serious
injury.

Do not allow children to climb or
play on the LCD TV.
- If it falls over on children, it may cause serious
injury.

ALERT

Unplug when you do not use your
LCD TV for a long time.
- If dust is stacked on the LCD TV, electric shock
or fire may be caused from heat, fire, or
deterioration of insulation.

In the event of damaging or
dropping the product, switch off the
power and remove the plug.
- Using a damaged product may cause an electric
shock or a fire.
- Contact your local service center.

HYUNDAI LCD TV HQL170WR/200NR

GENERAL INFORMATION

Alcohol

LUBRICANT

Benzene

When cleaning the LCD TV, make sure
to disconnect the power plug and use
a dry, soft cloth for a cleanup.

When replacing batteries, make
sure to match the batteries to the
(+) and (-) marks in the battery
compartment.
- Mismatching of polarities may result in internal
damage to batteries, fire due to leakage or
contamination.

Always use the standard batteries
and avoid using old batteries
together with new ones.

- Please avoid using chemicals such as wax,
benzene, alcohol, thinner, mosquito spray,
air freshener, lubricant or synthetic
detergent.

- Otherwise it may result in internal damage to
batteries, fire due to leakage or contamination.

Consult a service center or customer
service for inside cleaning about
once a year.
- When dust is piled inside the LCD TV for a long
time, fire or malfunction may be caused.

When moving the LCD TV, 2 or more
people are advised to carry it.
- Injury or damage may be caused when the LCD
TV falls.

Before moving your LCD TV, ensure to
switch off the power and unplug all the
electrical cords and the external
connection cords such as an antenna
cable and other source connections, etc.
- An electrical cord(s) may be damaged resulting
in a fire or an electrical shock.

GENERAL INFORMATION

Contents of the Package
To purchase additional parts, consult a distributor or selling agent.

Remote Control/2
Batteries
(1.5V AAA)

Antenna Cable

PC signal Cable(D-SUB)

Japan

America/Canada

Europe

South Africa

Australia

Power Cord

User’s Guide
Korea

Separately Sold Products
If you want to purchase separately sold products, consult a service center, electronics shops, or parts seller.

Component(Y, Pb, Pr) Cable

Scart Cable

Composite(Video & Audio) Cable

Audio Cable(DVD/DTV)

S-video cable

Audio Cable(PC)

HYUNDAI LCD TV HQL170WR/200NR

How to Use the Kensington Security Slot
GENERAL INFORMATION

- This display unit supports a Kensington-type security device to secure your LCD TV. Kensington lock is not
included.
- To purchase and install the Kensington locking device, please refer to the following contact information.

Kensington
security slot

* Kensington Technology Group
• Address : 2000 Alameda de las Pulgas 2F San Mateo, California 94403-1289
• Tel : +1 650 572 2700
• Fax : +1 650 572 9675
• Web-site : www.kensington.com

GENERAL INFORMATION

How to Use the Rear Cap and Cable Holder
The Rear Cap and Cable Holder allow you to organize the connection cables on the rear of the product.

1. Pressing and pulling two hooks on the
rear downward can detach the rear cover.
2. Connect your cables to the terminals of
the rear.
3. Organize the connected cables neatly
using the Cable Holder.
4. Align the rear cover with the guide holes
and push the cover firmly toward the front
of the monitor until the latches click into
the locked position.

Cable Holder

HYUNDAI LCD TV HQL170WR/200NR

How to Adjust the View Angle
GENERAL INFORMATION

You can adjust the angle of the view for the desired view angle.

You can adjust any angle within a range of 30º to the left or right.

30O

You can adjust the tilt of the TV from -5º to 10º after the installation.

-5O

10O

GENERAL INFORMATION

How To Install Wall Mount Support
1. Caution
1. Install on the vertical wall surface only.
2. Do not install on the following places to protect the performance of LCD TV and to prevent malfunction.
Near sprinkler Detector,
Near heating devices,
Places where vibration or shock may be applied ,
Near high voltage electric power line
3. Install in a proper method with the structural materials of the wall.
If the wall is not strong enough to stand weight of TV set, reinforce the wall surface before installation.
4. Do not install within a wall.

2. Parts configuration chart
130.0

135.0

Plastic Anchor - 4 EA
Screw - 4 EA

Washer - 4 EA
Fixing Panel Assembly

Base frame Assembly

Screw - 5 EA

* The above image may look different from the real product.

3. Angle Adjustment(Option)
The angle of LCD TV may be adjusted from -15 degree to 15 degree.

150 angle
* A fixed wall mount frame does not support angle adjustment.

-150 angle

No angle

HYUNDAI LCD TV HQL170WR/200NR

How To Install Wall Mount Frame
GENERAL INFORMATION

4. Installation Method
1. Unscrew screws fastened on 4 spots on the stand of LCD
TV.
3. Fix the Base Frame Assy on the wall with screws or nails.

2. Fasten the Fixing Panel assembly on the back of LCD TV as
shown on the picture.
(ATTENTION! Please use the supplied screws (4 x 12 mm
or no longer than 12 mm.)
4. Hook the Fixing Panel Assy with the LCD TV attached on
the Base Frame Assy. (Tighten the screws as shown in
the above picture to ensure that the TV is secured.)

GENERAL INFORMATION

Parts Names and Functions
Front View

* The above image may look different from the real product.
Source button
Use this button to switch among inputs
connected to the LCD TV.
Menu button
Use this button to display or exit from menus.
Volume buttons
Use these buttons for your desired sound
level. These buttons also serve as the cursor
of Select/Adjust when in Menu mode.
Channel(Program) buttons
Use these buttons to change programs.
These buttons also serve as the cursor of
Down and Up buttons when in Menu mode.

Power button
Use this button to turn on or off the LCD TV.
Remote sensor and power LED.
- Point the remote control toward here.
- It displays standby or operation status.
Speaker
- Power Indicator Staus Indicator

Status

Red

Stand-by

Green

Power on

Green blinking

Remote control

HYUNDAI LCD TV HQL170WR/200NR

GENERAL INFORMATION

Rear View

* The above image may look different from the real product.
Power input terminal
Power cord is connected here.
ANT. input
This allows you to connect your antenna.
D-SUB input terminal
Connect to RGB output terminal of a PC.
Component input terminal for DVD or DTV
Connect to the Component output terminal of DVD
player/DTV receiver.
Audio input terminal for DVD or DTV
Connect to the audio output terminal of DVD
player/DTV receiver.
S-video input terminal

Use this for the better video quality than Composite
video input terminal.
Video and Audio Composite input terminal for VCR
Connect to the Composite Video output terminal of
VCR or DVD player.
Headphone Jack
Connect to the Headphone.
Audio input Jack
Connect to the audio output terminal of PC.
Scart input terminal
For Composite Video/Audio or R, G, B input used in
the European area.

GENERAL INFORMATION

Remote Control
POWER/STANDBY
Use this button to turn the TV set on or off.
MUTE
Use this button to turn the sound off completely.
NUMERIC KEYS
- Use these buttons to select programs and input digit
- Enter program names using alphabets and special letters.
PRE-PR
Use these buttons to return to the previous program.
ASPECT RATIO
Use this button to change the picture size. (This function is
available only with the TV, Video, S-Vedio, Scart mode.)
STILL
Use this button to freeze a picture.
VOLUME
Use this button to control the volume level.
PR
- Use this button to select programs.
- Use this button to jump back to TV mode from other mode.
- Use this button to turn the TV set on.
MULTI/S.SWAP
- Use this button to select 9 partitions screens. (This function
is available only with the TV, Video, S-Video, Scart mode.)
- Sound Swap is only available when in PIP/POP mode.
SUB SOURCE
Use this button to select the input source in sub picture.
( TV VIDEO S-VIDEO SCART
UP/DOWN
Use these buttons to move each item of menu you want to
choose.
MAIN SOURCE
- Use these buttons to display the available video source.
(TV, VIDEO, S-VIDEO, SCART, COMPONENT, PC)
SLEEP
Use this button to allow your TV to turn off automatically at
designated time.
INFO
Use this button to display input source and clock information.
S.MODE
Use this button to display types of audio signals currently
aired on TV. Or you can use this button to switch to other
Sound Mode available.
EXIT
Use this button to exit from a menu or function.
Use this button to exit from PIP/POP/MULTI.
LEFT/RIGHT
Use this button to select or adjust each item of menu.
MENU
Use this button to bring up the OSD on the screen.

POWER

MUTE

PR LIST

PRE – PR

0
SOUND

PICTURE ASPECT

STILL

VOLUME

COMPONENT

PC
VIDEO

PIP

POP

SOURCE

MULTI

SUB
POSITION

S.SWAP

SOURCE

EXIT

MAIN

INFO

S.MODE

SLEEP

TTX

MIX

INDEX

LIST/FLOF

STORE

HOLD

SIZE

REVEAL

SUB PAGE

HYUNDAI LCD TV HQL170WR/200NR

INFO

S.MODE

SLEEP

TTX

MIX

INDEX

LIST/FLOF

STORE

HOLD

SIZE

REVEAL

SUB PAGE

Teletext & Fastext Function 

GENERAL INFORMATION

POP (Picture Of Picture)
Use this button for POP On/Off. (This function is available
only with the TV, Video, S-Vedio, Scart mode.)
PIP (Picture in Picture) / POSITION
Use this button for PIP On/Off or select position.
VIDEO
Use this button to select Video, S-Video or Scart mode.
COMPONENT/PC
Use this button to select Component or PC mode.
SOUND
Use this button to select the status of sound.
PICTURE
Use this button to select the status of picture.
PR LIST
Use this button to select program list.

( P. 71 ~ 73)
TTX
Use this button to activate the teletext mode.
LIST/FLOF
To select LIST/FLOF mode.
STORE
To store teletext pages.
SUB PAGE
To move to Sub Page.
REVEAL
To reveal the hidden TTX information.
BLUE
To move between BLOCK and BLOCK.
YELLOW
To move to NEXT GROUP PAGE.
GREEN
To move to NEXT EXISTING PAGE.
RED
To return to the previous selection
SIZE
The size is changed from Normal, Double to Double
Bottom mode in order.
HOLD
To freeze the TV screen when in Multi Page.
MIX
To select MIX mode.
INDEX
To move to INDEX in FLOF or move to INFO in TOP.

How to Insert Batteries in Remote Control

1
Press and hold ∆ part and push to
open cover.

Insert batteries with proper
polarities of + and - .

Use the remote control with cover
closed.

*Battery type : 1.5V/BP-2KM(AAA/LR03G

GENERAL INFORMATION

H Y U N DA I L C D CO L O R T V
Connections
Connecting Indoor/Outdoor TV Antenna(UHF/VHF) ......................23
Connecting to the Antenna Input Connection on the External
Equipment ...................................................................................24
Connecting a VCR, Cable/Satellite Receiver ...............................25
Connecting a DTV Receiver or DVD Player .................................26
Playing Back a Tape Recorded On a Camcorder .........................27
Connecting to a PC ......................................................................28
Resolutions Supported in PC ......................................................29
Scart Connection to the External Input/Output ...........................30
Scart Pin Specifications ..............................................................31

Connecting Indoor/Outdoor TV Antenna(UHF/VHF)
Connection Method
CONNECTIONS

Ensure to connect an antenna cable to the antenna input connection.

indoor antenna
Power Cable
Antenna cable
Coaxial cable

outdoor antenna

Antenna cable
Coaxial cable

How to Watch
SOURCE

Turn on your LCD TV and press MAIN or
You can select

Press

VIDEO

S-VIDEO

on remote control unit to select TV.
SCART

COMPONENT

in order.

or Numeric keys to select the desired Programs.

• When inserting a 75-ohm coaxial cable into the input connection, ensure the wire tip not to bend.
• If you experience poor signal reception, we recommend you purchase a signal amplifier for better picture
quality.

HYUNDAI LCD TV HQL170WR/200NR

Connecting to the Antenna Input Connection on the External Equipment
Connection Method
Connect an antenna cable to VCR/Cable/Satellite Receiver with the antenna input.

CONNECTIONS

1
2

Use a coaxial cable to connect VCR/Cable/Satellite Receiver's antenna output to the antenna input on your
LCD TV.

VCR/Cable Receiver

)6<7=<

)6<16

:
)=,17

;>1,-7 >1,-7

Coaxial cable

Connecting a VCR, Cable/Satellite Receiver

CONNECTIONS

Connection Method

Connect Video/S-Video cable between Video/S-Video output terminal of VCR or Cable/Satellite receiver and
Video/S-Video input terminal of LCD TV.
(Connect cables and terminal in the same colors)

Connect Audio cable (left:white color, right:red color) between Audio output terminal of VCR or cable/satellite
receiver and Audio input terminal of LCD TV.
(Connect cables and terminal in the same colors)
VCR/Cable Receiver

)6<7=<

4
;>1,-7 >1,-7

:
)=,17

Audio Cable

VIDEO Cable or
S-VIDEO Cable

How to Watch
VIDEO

Turn on your LCD TV and press
You can select

VIDEO

S-VIDEO

on remote control unit to select Video or S-Video.
SCART

in order.

VCR play : Turn on the VCR and insert a tape and play it.
Cable/Satellite receiver : Turn on the receiver and select a channel.
Read a user manual of VCR, Cable/Satellite Receiver for more details.

Use S-video cables for better picture quality.

)6<16

HYUNDAI LCD TV HQL170WR/200NR

Connecting a DTV Receiver or DVD Player
Connection Method
Connect video cables(Y, Pb, Pr) between output terminals(Y, Pb, Pr) of DTV receiver or DVD player and the
input terminals(Y, Pb, Pr) of DTV/DVD on the rear of LCD TV.
(Connect cables and terminal in the same colors)

Connect Audio cable between Audio output terminal of DTV receiver or DVD player and Audio input terminal
for DTV/DVD Audio on the rear of LCD TV.
(Connect cables and terminal in the same colors)

CONNECTIONS

DTV receiver / DVD Player

AUDIO

VIDEO COMPONENT VIDEO S-VIDEO

VIDEO(Y, Pb, Pr) Cable
Audio Cable

How to Watch
COMPONENT

Turn on your LCD TV and press
You can select

COMPONENT

on remote control unit to select DTV or DVD.
in order.

Turn on a DTV receiver or DVD player and use it.
Read the user manual of DTV receiver or DVD player for more details.

- Output terminal mark(Y, Pb, and Pr) of DVD player may be written as Y, B-Y, R-Y/Y-Cb-Cr / Y-Pb-Pr. (It depends
on DVD player)
- To watch digital broadcast, you have to separately purchase a digital set-top box and connect it to LCD TV.

Playing Back a Tape Recorded On a Camcorder

CONNECTIONS

Connection Method

Connect Video cable between Video output terminal of Camcoder/Game player and Video input terminal of
LCD TV.
(Connect cables and terminal in the same colors)

Connect Audio cable (left:white color, right:red color) between Audio output terminal of Camcoder/Game
player and Audio input terminal of LCD TV.
(Connect cables and terminal in the same colors)

Camcorder

Game Player

4
>1,-7

Audio Cable
VIDEO Cable

How to Watch
VIDEO

Turn on your LCD TV and press
You can select

VIDEO

S-VIDEO

on remote control unit to select Video.
SCART

in order.

Turn on a Game player or Camcorder and use it.
Read the user manual of Game player or Camcorder for more details.

:
)=,17

HYUNDAI LCD TV HQL170WR/200NR

Connecting to a PC
Connection Method
Connect PC signal cable(15 pins D-SUB) between output terminal of PC and the D-SUB input terminal of
a LCD TV.

Connect Audio cable between Audio output terminal of PC and Audio input terminal for PC of LCD TV.
(Connect cables and terminal in the same colors)

CONNECTIONS

Audio Cable
D-SUB Cable
(15pin)

When Using as a PC Monitor
COMPONENT

Turn on your LCD TV and press
You can select

COMPONENT

on remote control unit to select PC.
in order.

Turn on the PC and use it. (Refer to next page on the back for the supported resolutions for PC)

This product supports plug-and-play function.

CONNECTIONS

Resolutions Supported in PC
Resolution

Horizontal frequency(kHz)

Vertical frequency(Hz)

720 x 400

31.5

70.1

31.5

59.9

37.9

72.8

37.9

60.3

46.9

48.4

56.5

70.1

640 x 480

800 x 600

1024 x 768

HQL200NR
- Recommended Resolution is 640x480@60Hz
- Max Resolution is 1024x768@75Hz

HQL170WR
- Recommended Resolution is 1024x768@60Hz
- Max Resolution is 1024x768@75Hz

HYUNDAI LCD TV HQL170WR/200NR

Scart Connection to the External Input/Output
Connection Method
This end can be fitted with : A Scart connector

CONNECTIONS

VCR

DVD

Video Game Device
TV OUT

TV IN

Video Disc Player
SCART CABLE :
RGB or VIDEO(CVBS) + Audio(L/R)
Satellite Receiver

Set Top Box

How to Watch
VIDEO

Turn on your LCD TV and press
You can select

VIDEO

S-VIDEO

on remote control unit to select SCART.
SCART

in order.

Read a user manual of VCR, DVD, Satellite Receiver and other etc. for more details.

- When switching voltage comes into the Scart-Pin 8 during viewing a TV program, the current mode will be
switched to Scart mode.
- Any inappropriate connection when connecting or removing your scart connector may generate a Blue Screen.
If this happens, ensure that the scart connector is properly connected.

Scart Pin Specifications

CONNECTIONS

If you wish to connect other equipment via the scart connectors on your TV, contact your dealer or a qualified
technician to wire the A/V cable as illustrated below.

SIGNAL

Audio Output R

Audio Intput R

Red Intput GND

Audio Output L

Audio Intput GND

RGB Red Input

Blue Intput GND

RGB Blinking Signal Input

Audio Intput L

Video Output GND

RGB Blue Input

Video Intput GND

Switching Voltage Input

Video Output (CVBS)

Green Intput GND

Video Intput (CVBS)

Scart Connector GND

RGB Green Intput

H Y U N DA I L C D CO L O R T V
Picture Setup
How to Select the Picture Mode .................................................33
How to Set the Desired Picture ...................................................34
How to Set Noise Reduction .......................................................35
How to Set PIP [Mode] ................................................................36
How to Set POP [Mode] ..............................................................36
How to Set Multi [Mode] .............................................................37
How to Freeze Picture ................................................................38
How to Select the Aspect Ratio ..................................................39

How to Select the Picture Mode
Users can adjust picture mode automatically according to the input mode(TV, Video, S-Video, Scart, Component).

MOVE

Press Up and Down buttons to move to
“Mode”.

Press Left and Right buttons, then the menu
changes in order below.
STANDARD USER DYNAMIC MILD

EXIT

MOVE

STANDARD : For a general contents, It fits most video contents.
USER : When the user wants to set the values

see the next page

DYNAMIC : For a clear display.
MILD : For a soft display.

PICTURE

- Users can select

Standard

User

Dynamic

button.
Mild

in order.

Adjustments menu may be different according to the input source.
(To set Picture mode in PC mode, please see page 51.)

SELECT

USER
30
20
25
25
20
OFF

MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
NOISE REDUCT

Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.

How To Directly Select Picture Mode : Press

USER
30
20
25
25
20
OFF

MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
NOISE REDUCT

Press Left and Right buttons to select
“
”
.

1
PICTURE SETUP

Press Menu button.
Menu items appear on the screen.

SELECT

HYUNDAI LCD TV HQL170WR/200NR

How to Set the Desired Picture
Users can manually adjust the picture in their own ways.

Press Menu button.
Menu items appear on the screen.

Press Left and Right buttons to select
“
”
.

Press Up and Down buttons to move to
“MODE”.

Press Left and Right buttons to select
“USER”.

MOVE

SELECT

MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
NOISE REDUCT

MOVE

PICTURE SETUP

USER
30
20
25
25
20
OFF

MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
NOISE REDUCT

USER
30
20
25
25
20
OFF

SELECT

Press Up and Down buttons to choose
one of the items listed.

4
5

Press Left and Right buttons to adjust.

EXIT

Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.

CONTRAST : Adjust the brightness and darkness of object and background.
BRIGHTNESS : Adjust the brightness of the entire picture.
COLOR : Adjust colors into deeper or lighter colors.
TINT : Adjust colors naturally.
SHARPNESS : Adjust clarity of outline of objects.

- COLOR, TINT, SHARPNESS is not applied to PC mode.
- SHARPNESS is not applied to Component mode.

How to Set Noise Reduction
Noise Reduction is to eliminate some noise on the screen and is not applied to Component and PC mode.

Press Left and Right buttons to select
“
”
.

1
PICTURE SETUP

Press Menu button.
Menu items appear on the screen.

Press Up and Down buttons to move to
“NOISE REDUCT”.

Press Left and Right buttons, then the menu
changes in order below.
OFF MIDDLE STRONG

EXIT

USER
30
20
25
25
20
OFF

MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
NOISE REDUCT

MOVE

SELECT

USER
30
20
25
25
20
OFF

MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
NOISE REDUCT

MOVE

SELECT

Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.

OFF : For a normal screen.
MIDDLE : For a reduced noise on the screen.
STRONG : For a strongly reduced noise on the screen.

In the noise reduction, the more you reduce screen noise, the more the sharpness level of the picture will
degrade.

HYUNDAI LCD TV HQL170WR/200NR

How to Set PIP [Mode]
- You can watch another device's image in the PIP while watching the main image.
- This function is available only with the remote control.
PIP

Press the PIP button.
You will see the PIP at the upper left corner.

PIP

Press the PIP button, then position
changes in order below.
Left Up Right Up Right Down
Left Down OFF

PIP

SUB

Press the SOURCE button, then PIP input source
changes in order below.
TV VIDEO S-VEDIO SCART

EXIT

To deselect PIP function,
Press EXIT button.

PICTURE SETUP

SOURCE

Main

How to Set POP [Mode]
- You can watch another device's image in the POP while watching the main image in TV, VIDEO, S-VIDEO or SCART mode.
- This function is available only with the remote control.
Press the POP button.
You will see the POP at the Right.
To deselect POP function,
Press POP button once more.

POP

SUB

Press the SOURCE button, then POP input source
changes in order below.
TV VIDEO S-VEDIO SCART

EXIT

To deselect POP function,
Press EXIT button.

SOURCE

Main

POP

- Main and sub pictures cannot have the same input source.
- In case of TV mode, you can change the PIP TV program by “PR” Button.
- In case of TV mode, you can change the POP TV program by “PR” Button.

How to Set Multi [Mode]
- You can watch all 9 screens in sequence.
- You can watch another device's image in the MULTI while watching the main image in TV, VIDEO, S-VIDEO or SCART mode.
- This function is available only with the remote control.
MULTI

S.SWAP

PICTURE SETUP

EXIT

Press the MULTI button.
You will see the Multi screen of nine screens.
To deselect Multi function, Press Multi button once more.

To deselect Multi function,
Press EXIT button.

- In case of TV mode, you can change the multi TV program.
- You cannot change the multi input source.
- This function is not available when in PIP/POP Mode.

Supported PIP Table
PIP : O → Supported, X → Not Supported

Main

Video

S-Video

Scart

Component

Video

S-Video

Scart

Component

Sub

HYUNDAI LCD TV HQL170WR/200NR

Supported POP Table
POP : O → Supported, X → Supported

Main

Video

S-Video

Scart

Component

Video

S-Video

Scart

Component

PICTURE SETUP

Sub

- When power is ON/OFF, PIP, POP and MULTI functions are not stored.
- When main picture is in PC/Component input mode, POP function is not supported.
- In PIP or POP function, you cannot use PC/Component input mode for sub-picture.
- In PC/Component input mode, MULTI function is not supported.
- While MULTI function is activated, STILL is not supported.
- While PIP is activated, you cannot change the sub-picture's size.
- Image SWAP function is not supported.

How to Freeze Picture
The user can temporarily stop the playing picture.

STILL

Press Still button.
Playing picture is stopped.
* In PIP/POP mode, the main picture stops.
To deselect Still function.
Press Still button once more.

How to Select the Aspect Ratio
- Users can adjust Aspect Ratio as users want.
- This function is available only with the remote control.

ASPECT

Press the ASPECT button, then Aspect Ratio
changes in order below.
NORMAL Zoom 16:9 (HQL200NR)
NORMAL Panorama Zoom 4:3 (HQL170WR)

PICTURE SETUP

HQL200NR

HQL170WR

Normal

General broadcast picture
size.

General broadcast picture
is adjusted to 15:9.

16:9

Panorama

General broadcast picture is
adjusted to 16:9.

Picture size for panorama
video.

Zoom

Zoom in 4:3 in vertical
direction. (This mode is
recommended in letter
box format.)

4:3
General broadcast picture
size.

This function is available only in TV, VIDEO, S-VIDEO, SCART mode.
This function is not available in PIP, POP, MULTI mode.

H Y U N DA I L C D CO L O R T V
Audio Setup
How to Select the Volume, Balance and Mute ............................41
How to Set the Audio Mode(Equalize) .........................................42
How to Set the Desired Audio .....................................................43
How to Listen to Stereo Sound / Dual Sound ..............................44
How to Select the Surround ........................................................46
How to Select AVL ......................................................................47
How to Select the Sound Swap ..................................................48

How to Select the Volume, Balance and Mute
- Users can adjust the volume and Balance of left and right speakers.

Press Left and Right buttons to select
“
”
.

AUDIO SETUP

Press Menu button.
Menu items appear on the screen.

Press Up and Down buttons to move to
“VOLUME or BALANCE”.

Press Left and Right buttons to adjust.

MOVE

Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.

MUTE

How To Select the Mute : Press

button.

Playing sound is Stopped.
To deselect Mute function, Press MUTE button once more.

SELECT

20
25
STANDARD
15
16
12
12
13
OFF
OFF

VOLUME
BALANCE
EQUALIZE
120 Hz
500 Hz
1.5 kHz
5 kHz
10 kHz
SURROUND
AVL
MOVE

EXIT

20
25
STANDARD
15
16
12
12
13
OFF
OFF

VOLUME
BALANCE
EQUALIZE
120 Hz
500 Hz
1.5 kHz
5 kHz
10 kHz
SURROUND
AVL

SELECT

HYUNDAI LCD TV HQL170WR/200NR

How to Set the Audio Mode(Equalize)
Users can adjust sound mode automatically as users want.

Press Menu button.
Menu items appear on the screen.

Press Left and Right buttons to select
“
”
.

MOVE

Press Up and Down buttons to move to
“EQUALIZE”.

Press Left and Right buttons, then the menu
changes in order below.
STANDARD MUSIC MOVIE NEWS

SELECT

20
25
STANDARD
15
16
12
12
13
OFF
OFF

VOLUME
BALANCE
EQUALIZE
120 Hz
500 Hz
1.5 kHz
5 kHz
10 kHz
SURROUND
AVL

USER

MOVE

SELECT

AUDIO SETUP

EXIT

20
25
STANDARD
15
16
12
12
13
OFF
OFF

VOLUME
BALANCE
EQUALIZE
120 Hz
500 Hz
1.5 kHz
5 kHz
10 kHz
SURROUND
AVL

Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.

STANDARD : For the general sound. This fits most audio contents.
MUSIC : For original sound
MOVIE : For grandiose sound
NEWS : For clear sound
USER : When the user wants to set the value

see the next page

HYUNDAI LCD T V HQL260

SOUND

How To Directly Select Sound Mode : Press

button.

Users can select

NEWS

STANDARD

MUSIC

MOVIE

USER

in order.

How to Set the Desired Audio
Users can manually adjust the sound in thier own ways.

Press Left and Right buttons to select
“
”
.

AUDIO SETUP

Press Menu button.
Menu items appear on the screen.

Press Up and Down buttons to move to
“EQUALIZE”.

Press Left and Right buttons to select “USER”.

MOVE

Press Up and Down buttons to choose one of the items listed.
120 Hz 500 Hz 1.5 kHz 5 kHz
10 kHz

Press Left and Right buttons to adjust.

EXIT

SELECT

Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.

20
25
STANDARD
15
16
12
12
13
OFF
OFF

VOLUME
BALANCE
EQUALIZE
120 Hz
500 Hz
1.5 kHz
5 kHz
10 kHz
SURROUND
AVL
MOVE

20
25
STANDARD
15
16
12
12
13
OFF
OFF

VOLUME
BALANCE
EQUALIZE
120 Hz
500 Hz
1.5 kHz
5 kHz
10 kHz
SURROUND
AVL

SELECT

HYUNDAI LCD TV HQL170WR/200NR

How to Listen to Stereo Sound / Dual Sound
- Users can set sound mode as users want.
- This function is available only with the remote control.
- Listening to stereo sound
S.MODE

S.MODE

Press the
button on the remote control to select Mono or Stereo.
Mono or Stereo be will selected in turn whenever you press the button.
S.MODE
(*During FM MONO broadcast, pressing the
button will display the current status.)

- Listening to the Dual sound
S.MODE

Press the

S.MODE

button on the remote control to select Dual sound.

AUDIO SETUP

Dual 1 : Your national language.
Dual 2 : Foreign language
(*Dual 1 or Dual 2 be will selected in turn whenever you press the button.)

This S.MODE displays the current Audio signal status, and controls the processing of Audio signal. When power
is switched on, the mode is automatically preset to either “Dual-I” or “Stereo”, depending on the current signal
transmission condition.

AUDIO SETUP

NICAM
Stereo

A2
Stereo

Type of Broadcast

On-Screen Indication

Regular Broadcast
(Standard audio)

Mono
(Normal use)

Regular+
NICAM Mono

NICAM Mono

Mono

NICAM Stereo

Mono

NICAM Dual-I/II

NICAM Dual 1 NICAM Dual 2
Mono

Regular broadcast
(Standard audio)

Mono
(Normal use)

Bilingual or Dual-I/II

Dual 1

Dual 2

Stereo

Mono

If the signal reception conditions deteriorate, setting to Mono will make your listening condition better.

HYUNDAI LCD TV HQL170WR/200NR

How to Select the Surround
You can listen to dynamic and surround sound only with ordinary speakers.

Press Menu button.
Menu items appear on the screen.

Press Left and Right buttons to select
“
”
.

Press Up and Down buttons to move to
“SURROUND”.

Press Left and Right buttons to select “ON/OFF”.

MOVE

20
25
STANDARD
15
16
12
12
13
ON
OFF

VOLUME
BALANCE
EQUALIZE
120 Hz
500 Hz
1.5 kHz
5 kHz
10 kHz
SURROUND
AVL
MOVE

EXIT

SELECT

AUDIO SETUP

20
25
STANDARD
15
16
12
12
13
OFF
OFF

VOLUME
BALANCE
EQUALIZE
120 Hz
500 Hz
1.5 kHz
5 kHz
10 kHz
SURROUND
AVL

Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.

How to Select AVL
This function automatically gives a similar volume size to each channel.

AUDIO SETUP

Press Left and Right buttons to select
“
”
.

Press Up and Down buttons to move to
“AVL”.

Press Left and Right buttons to select “ON/OFF”.

20
25
STANDARD
15
16
12
12
13
OFF
OFF

VOLUME
BALANCE
EQUALIZE
120 Hz
500 Hz
1.5 kHz
5 kHz
10 kHz
SURROUND
AVL
MOVE

SELECT

Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.

20
25
STANDARD
15
16
12
12
13
ON
OFF

VOLUME
BALANCE
EQUALIZE
120 Hz
500 Hz
1.5 kHz
5 kHz
10 kHz
SURROUND
AVL
MOVE

EXIT

Press Menu button.
Menu items appear on the screen.

SELECT

HYUNDAI LCD TV HQL170WR/200NR

How to Select the Sound Swap

MULTI

Press the

button.
S.SWAP

S.SWAP

The Main Sound and Sub Sound will switch with each other whenever you press this button.

AUDIO SETUP

- An Audio Swap function is only available when in PIP/POP mode.
- A Multi function is not available when in PIP/POP mode.
- If you select the Audio Swap in Audio Swap mode and end PIP/POP, the sound of main screen will come back.
- The audio input jack is used for both Video and S-Video.
- While watching the main screen and listening to the sound of sub-screen, the sound of sub-screen will be still
active even if you switch the current channel to another
- After selecting the Audio Swap, when you turn the power off and back on, the sound of main-screen will
come back.
- After switching to the sound of sub-screen in PIP/POP mode, even if you change the input of sub-screen to
other input, the sound of sub-screen will be still kept.

AUDIO SETUP

H Y U N DA I L C D CO L O R T V
PC Setup
How to Select the Color Mode ....................................................51
How to Select the Auto Adjust ....................................................52
How to Set the Geometry ............................................................53

How to Select the Color Mode
This function is available only with the PC mode.

Press Up and Down buttons to move to
“Mode”.

Press Left and Right buttons, then the menu
changes in order below.
STANDARD USER COOL WARM

EXIT

MOVE

STANDARD : Color for general picture.
see the 34 page

COOL : For colors with bluish tone.
WARM : Warm colors with reddish tone.

PICTURE

How To Directly Select Picture Mode : Press
- Users can select

Standard

User

Cool

button.
Warm

SELECT

, when the input mode is PC mode.

USER
30
20
25
25
20
OFF

MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
NOISE REDUCT

Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.

USER : When the user wants to set the values

USER
30
20
25
25
20
OFF

MODE
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
NOISE REDUCT

Press Left and Right buttons to select
“
”
.

1
PC SETUP

Press Menu button.
Menu items appear on the screen.

SELECT

HYUNDAI LCD TV HQL170WR/200NR

How to Select the Auto Adjust
- Horizontal/Vertical positions are automatically adjusted.
- This function is available only with the PC mode.

Press Menu button.
Menu items appear on the screen.

Press Left and Right buttons to select
“
”
.

Press Left and Right buttons to “Auto Adjust”,
then it will be adjusted the screen.

EXIT

MOVE

7
25
12
0
0

SELECT

AUTO ADJUST
H-SIZE
H-POSITION
V-POSITION
FINE TUNE
SMOOTHING

MOVE

PC SETUP

Press Up and Down buttons to move to
“Auto Adjust”.

AUTO ADJUST
H-SIZE
H-POSITION
V-POSITION
FINE TUNE
SMOOTHING

7
25
12
0
0

SELECT

Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.

How to Set the Geometry
- This is reduct image retention and noise.
- This function is available only with the PC mode.

Press Left and Right buttons to select
“
”
.

Press Up and Down buttons to choose
one of the items listed.

PC SETUP

Press Menu button.
Menu items appear on the screen.

MOVE

7
25
12
0
0

SELECT

AUTO ADJUST
H-SIZE
H-POSITION
V-POSITION
FINE TUNE
SMOOTHING

7
25
12
0
0

Press Left and Right buttons to adjust.
MOVE

EXIT

Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.

H-SIZE : To adjust the horizontal size of the picture.
H-POSITION : To adjust the horizontal position of the picture.
V-POSITION : To adjust the vertical position of the picture.
FINE TUNE : To adjust to eliminate the shake of picture.
SMOOTHING : To change viewing point at high resolution(Upper VGA)

AUTO ADJUST
H-SIZE
H-POSITION
V-POSITION
FINE TUNE
SMOOTHING

SELECT

H Y U N DA I L C D CO L O R T V
TV Setup
How to Store Program Automatically ..........................................55
How to Set Manual Store ............................................................56
How to Directly Select the PR LIST .............................................59

How to Store Program Automatically
- When you start using your TV for the first time, you must select your country to auto store.
- You can scan channels available to you automatically.

COUNTRY
AUTO STORE
MANUAL STORE
SEARCHING
PROGRAM NO.
NAME
FINE TUNE
PR EDIT
SORT
FROM
OO

Press Left and Right buttons to select
“
”
.

TV SETUP

Press Menu button.
Menu items appear on the screen.

MOVE

Press Up and Down buttons to move to
“Country”.

Press Left and Right buttons,
then the menu changes in order below.
WEST EURO EAST EURO FRANCE

Press Up and Down buttons to move to
“Auto Store”.
Frequency : 48.25 Mhz ~ 855.25 Mhz

Press Left and Right buttons to selcet “Auto Store”,
then it will be stored the searched channels.
After completing channel searching,
it will return to the first stored program No.

EXIT

COUNTRY
AUTO STORE
MANUAL STORE
SEARCHING
PROGRAM NO.
NAME
FINE TUNE
PR EDIT
SORT
FROM
OO

OTHERS

MOVE

COUNTRY
AUTO STORE
MANUAL STORE
SEARCHING
PROGRAM NO.
NAME
FINE TUNE
PR EDIT
SORT
FROM
OO
MOVE

WEST EURO

0
-1
ERASED
TO

SELECT

SAVE
EXIT

WEST EURO

0
–1
ERASED
TO

SELECT

SAVE
EXIT

WEST EURO

0
–1
ERASED
TO
SELECT

SAVE
EXIT

Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.

- When AUTO STORE is completed, you will get back to the first stored program No.
- If you press MENU or EXIT button during AUTO STORE in progress, the AUTO STORE will stop at the last
stored program No. at the moment of pressing the button.
- After activating AUTO STORE, program numbers in green indicate that the correspondent channels are stored
and program numbers in blue indicate that the correspondent channels are not stored.
- After activating AUTO STORE, if you experience an unstable image of the stored channel, please refer to Step
8 and 9 on next page. If you live in a poor reception area, the image quality may not be improved.
- While Auto Store in progress, all channels broadcasting are memorized regardless of TV or CATV channels.
- WEST EURO(Germany, Spain, Italy, Netherland, Greece, Portugal, Norway, Denmark, Sweden, Switzerland,
Austria, Yugo, Slovenia...), EAST EURO(Russia, Slovak. Rep, Poland, Bulgalia, Hungary...), FRANCE, UK(UK,
Ireland), OTHERS(Luxembourg, Monaco...)

HYUNDAI LCD TV HQL170WR/200NR

How to Set Manual Store
This function allows you to manually edit the desired programs while watching a TV program.
If the signal is weak or distorted, you have to fine tune the program manually.

Press Menu button.
Menu items appear on the screen.

COUNTRY
AUTO STORE
MANUAL STORE
SEARCHING
PROGRAM NO.
NAME
FINE TUNE
PR EDIT
SORT
FROM
OO

Press Left and Right buttons to select
“
”
.

Press Up and Down buttons to move to
“Searching”.

Press Right button to searching the channel,
then the frequency changes in order below.
Channel Searching proceeds from
the current channel to the next channel.

Press Up and Down buttons to move to
“Program No”.

MOVE

COUNTRY
AUTO STORE
MANUAL STORE
SEARCHING
PROGRAM NO.
NAME
FINE TUNE
PR EDIT
SORT
FROM
OO
MOVE

Press Left and Right buttons to change the “Program No”.
Program Number is a current channel.

Press Up and Down buttons to move to
“Name”.

Press Right button to input the program name.
You can set up to 0 ~ 9 buttons.
, ,
A~Z , 0~9 , • , – , @ , , ’ , % , + , ‚ ,

To move one space (Space).

MOVE

COUNTRY
AUTO STORE
MANUAL STORE
SEARCHING
PROGRAM NO.
NAME
FINE TUNE
PR EDIT
SORT
FROM
OO

, /, (, )

MOVE

0
-1
ERASED
TO

SELECT

SAVE
EXIT

WEST EURO

0
–1
ERASED
TO

SELECT

SAVE
EXIT

WEST EURO

TV SETUP

COUNTRY
AUTO STORE
MANUAL STORE
SEARCHING
PROGRAM NO.
NAME
FINE TUNE
PR EDIT
SORT
FROM
OO

WEST EURO

–1
ERASED
TO

SELECT

SAVE
EXIT

WEST EURO

0
ABCD
–1
ERASED
TO
SELECT

SAVE
EXIT

To delete one character (Delete)

To move your cursor to the right or left (Direction Key)
* If you do nothing within 5 seconds, you will automatically exit the NAME MENU.

Go to next page,
If the signal of current program is weak or distored.

...... Continued from previous page.

8
9
10
11

Press Up and Down buttons to move to “Fine Tune”.

Press Left and Right buttons to adjust.
The fine tuned programs are automatically stored.

Press Up and Down buttons to move to “PR EDIT”.

Press Left and Right buttons to select “Stored/Erased”,
Program number is a current channel.

COUNTRY
AUTO STORE
MANUAL STORE
SEARCHING
PROGRAM NO.
NAME
FINE TUNE
PR EDIT
SORT
FROM
OO
MOVE

WEST EURO

0
ABCD
–1
ERASED
TO

SELECT

SAVE
EXIT

WEST EURO

0
ABCD
–1
ERASED
TO

SELECT

SAVE
EXIT

TV SETUP

Go to step 12,
If users want to Sort the Program Number.

12
13

Press Up and Down buttons to move to “From”

Press Left and Right buttons to change the Program No.

COUNTRY
AUTO STORE
MANUAL STORE
SEARCHING
PROGRAM NO.
NAME
FINE TUNE
PR EDIT
SORT
FROM
O5
MOVE

14
15

Press Up and Down buttons to move to “To”.

Press Left and Right buttons to change the Program No.

COUNTRY
AUTO STORE
MANUAL STORE
SEARCHING
PROGRAM NO.
NAME
FINE TUNE
PR EDIT
SORT
FROM
O5
MOVE

Countinued on next page ......

WEST EURO

0
ABCD
–1
ERASED
TO

SELECT

SAVE
EXIT

WEST EURO

0
ABCD
–1
ERASED
TO
SELECT

SAVE
EXIT

HYUNDAI LCD TV HQL170WR/200NR
...... Continued from previous page.

• FROM : Current Program Number
• TO : Change Program Number
ex) From 5, To 10
Change the program number from 5 to 10.

Press Up and Down buttons to move to “SAVE”.

Press Left and Right buttons to select the “Yes”

COUNTRY
AUTO STORE
MANUAL STORE
SEARCHING
PROGRAM NO.
NAME
FINE TUNE
PR EDIT
SORT
FROM
O5
MOVE

EXIT

WEST EURO

0
ABCD
–1
ERASED
TO
SELECT

SAVE
EXIT

Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.

TV SETUP
58

How to Directly Select the PR LIST

TV SETUP

PR LIST

Press PR EDIT button.
PR list items appear on the screen.

Press Up and Down buttons to move to
“Program No”.
* Program No. : 00 ~ 99

Press Left button to select “Stored/Erased”.
Program Number is a current channel.

Press Right button to select “Program No”.

If you want to change the program name or programe sort, please refer to page 56.

PROGRAM NO.
00
01
02
03
04
05
06
07
08
09
MOVE

NAME

ABC
CNN

SELECT

STORED
NO
YES
YES
YES
YES
YES
YES
YES
YES
YES
EXIT

H Y U N DA I L C D CO L O R T V
Option Setup
Choosing Your Language ............................................................61
How to Set OSD(On-Screen-Display) Display Time .....................62
How to Select the OSD Background ...........................................63
How to Set Sleep Time ...............................................................64
How to Set Clock ........................................................................65
How to Set On /Off Time .............................................................66
How to Set Key-Lock ..................................................................68
Displaying Information ................................................................69
Teletext Feature ..........................................................................71
Displaying the Teletext Information ............................................72
Selecting Display Options ...........................................................72

Choosing Your Language
When you start using your TV for the first time, you must select your language preference in order to display main
menu and sub menues, etc.

Press Left and Right buttons to select
“
”
.

1
2

Press Up and Down buttons to move to
“Language”.

Press Left and Right buttons, then the menu
changes in order below.
ENGLISH FRANÇAIS DEUTSCH
ESPAÑOL ITALIANO

OPTION SETUP

EXIT

Press Menu button.
Menu items appear on the screen.

LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK

MOVE

LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK
MOVE

ENGLISH
5 SECONDS
TRANSPARENT
––
OO : OO
OFF
OO : OO
VOLUME
O
OO : OO
OFF
SELECT

ENGLISH
5 SECONDS
TRANSPARENT
––
OO : OO
OFF
OO : OO
VOLUME
O
OO : OO
OFF

SELECT

Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.

HYUNDAI LCD TV HQL170WR/200NR

How to Set OSD(On-Screen-Display) Display Time

Press Menu button.
Menu items appear on the screen.

Press Left and Right buttons to select
“
”
.

1
2

Press Up and Down buttons to move to
“Display Time”.

Press Left and Right buttons, then the menu
changes in order below.
5 SECONDS 15 SECONDS 20 SECONDS
25 SECONDS 30 SECONDS 40 SECONDS

EXIT

LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK

MOVE

LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK
MOVE

ENGLISH
5 SECONDS
TRANSPARENT
––
OO : OO
OFF
OO : OO
VOLUME
O
OO : OO
OFF
SELECT

ENGLISH
5 SECONDS
TRANSPARENT
––
OO : OO
OFF
OO : OO
VOLUME
O
OO : OO
OFF

SELECT

Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.

OPTION SETUP

If you do not press the EXIT button after adjusting the OSD display time, the OSD menu will disappear
automatically after the set time.

How to Select the OSD Background
Users can select background type on On-Screen-Display.

Press Left and Right buttons to select
“
”
.

Press Up and Down buttons to move to
“Background”.

Press Left and Right buttons to select
“Transparent/Opaque”.

OPTION SETUP

EXIT

Press Menu button.
Menu items appear on the screen.

LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK

MOVE

LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK
MOVE

ENGLISH
5 SECONDS
TRANSPARENT
––
OO : OO
OFF
OO : OO
VOLUME
O
OO : OO
OFF
SELECT

ENGLISH
5 SECONDS
TRANSPARENT
––
OO : OO
OFF
OO : OO
VOLUME
O
OO : OO
OFF

SELECT

Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.

HYUNDAI LCD TV HQL170WR/200NR

How to Set Sleep Time
This function allows you to automatically turn off your LCD TV after a designated amount of time.

Press Menu button.
Menu items appear on the screen.

Press Left and Right buttons to select
“
”
.

Press Up and Down buttons to move to
“Sleep”.

Press Left and Right buttons, then the menu
changes in order below.
15 MINUTES 30 MINUTES 45 MINUTES
60 MINUTES 90 MINUTES 120 MINUTES

EXIT

LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK

MOVE

LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK
MOVE

ENGLISH
5 SECONDS
TRANSPARENT
––
OO : OO
OFF
OO : OO
VOLUME
O
OO : OO
OFF
SELECT

ENGLISH
5 SECONDS
TRANSPARENT
––
OO : OO
OFF
OO : OO
VOLUME
O
OO : OO
OFF

SELECT

OFF(- -)

Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.

OPTION SETUP

SLEEP

How To Directly Select SLEEP : Press

button.

The current SLEEP time is first displayed. Whenever you press the button, the setting is changed in order below.
- - (OFF) SLEEP 15 MINUTES SLEEP 15 30 MINUTES SLEEP 30 ............... SLEEP 120

If the sleep time has been set, your TV will display “TURN OFF AFTER 1 MIN” before your TV turns off.

How to Set Clock
You can set the current time so that it may be displayed by pressing the “INFO” button. You must also set a clock if
you wish to use the automatic on or off timers.

Press Menu button.
Menu items appear on the screen.

Press Left and Right buttons to select
“
”
.

Press Up and Down buttons to move to
“Clock”.
then cursors are moved to “Hour” unit.

Press Left and Right buttons to set
the “Hour”.

Press Up and Down buttons and then go to step 4
if you need to set the “Minute”.

Press Left and Right buttons to set
the “Minute”.

OPTION SETUP

4
EXIT

LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK

MOVE

LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK

SELECT

MOVE

SELECT

ENGLISH
5 SECONDS
TRANSPARENT
––
12 : 3O
OFF
OO : OO
VOLUME
O
OO : OO
OFF

SELECT

Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.

- When the power supply AC main power is cut off, the clock is reset to the value before the Time set.
- User cannot use number(0~9) buttons to set the clock.

ENGLISH
5 SECONDS
TRANSPARENT
––
12 : OO
OFF
OO : OO
VOLUME
O
OO : OO
OFF

MOVE

LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK

ENGLISH
5 SECONDS
TRANSPARENT
––
OO : OO
OFF
OO : OO
VOLUME
O
OO : OO
OFF

HYUNDAI LCD TV HQL170WR/200NR

How to Set On /Off Time
- This function is allowed you to automatically turn on/off your LCD TV at the preset time.
- If you wish to use this function, make sure to set the timer to ON.

Press Menu button.
Menu items appear on the screen.

Press Left and Right buttons to select
“
”
.

Press Up and Down buttons to move to
“Timer”.

Press Left and Right buttons to selcet
“ON”.

Press Up and Down buttons and then go to step 4
if you need to set to “On Time”.

Cursors are moved to “ON TIME”.
Press Left and Right buttons to set
to “Hour”.

Press Left and Right buttons to set
to “Minute”.

SELECT

MOVE

LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK

SELECT

LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK

Cursors are moved to “Program No”.
Press Left and Right buttons to set to
“Program No”.

LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK
MOVE

ENGLISH
5 SECONDS
TRANSPARENT
––
12 : 3O
ON
0 7 : OO
VOLUME
O
OO : OO
OFF

MOVE

ENGLISH
5 SECONDS
TRANSPARENT
––
12 : 3O
ON
OO : OO
VOLUME
O
OO : OO
OFF

SELECT

ENGLISH
5 SECONDS
TRANSPARENT
––
12 : 3O
ON
0 7 : OO
VOLUME
O
OO : OO
OFF

MOVE

Press Up and Down buttons and then go to step 6
if you need to set to “Program No”.

MOVE

LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK

ENGLISH
5 SECONDS
TRANSPARENT
––
OO : OO
OFF
OO : OO
VOLUME
O
OO : OO
OFF

OPTION SETUP

Press Up and Down buttons and then go to step 5
if you need to set to “Minute”.

LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK

SELECT

ENGLISH
5 SECONDS
TRANSPARENT
––
12 : 3O
ON
0 7 : OO
VOLUME
O
OO : OO
OFF

SELECT

Continued on next page ......

...... Continued from previous page. (Set the volume level at the time when your LCD TV turns on.)

Press Up and Down buttons and then go to step 7
if you need to set to “Volume”.

Press Left and Right buttons to adjust “Volume”.

Cursors are moved to “OFF TIME”.
Press Left and Right buttons to set
to “Hour”.

Press Up and Down buttons and then go to step 9
if you need to set to “Minute”.

Press Left and Right buttons to set to “Minute”.

LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK

MOVE

EXIT

SELECT

ENGLISH
5 SECONDS
TRANSPARENT
––
12 : 3O
ON
0 7 : OO
VOLUME
15
23 : OO
OFF

MOVE

LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK

ENGLISH
5 SECONDS
TRANSPARENT
––
12 : 3O
ON
0 7 : OO
VOLUME
15
OO : OO
OFF

MOVE

Press Up and Down buttons and then go to step 8
if you need to set to “Off Time”.

OPTION SETUP

LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK

SELECT

ENGLISH
5 SECONDS
TRANSPARENT
––
12 : 3O
ON
0 7 : OO
VOLUME
15
23 : 3O
OFF

SELECT

Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.

- Regardless of which Input Mode you set On Time in, your LCD TV will turn on in TV Mode only.
- User cannot use number(0~9) buttons to set the On/Off Time.
- If the OFF TIME has been set, your TV will display "TURN OFF AFTER 1 MIN” 1 minute before your TV turns off.

HYUNDAI LCD TV HQL170WR/200NR

How to Set Key-Lock
- This is to lock the control buttons on the front top of LCD TV.
- After setting the Key-Lock, your TV will work only with the remote control.

Press Menu button.
Menu items appear on the screen.

Press Left and Right buttons to select
“
”
.

Press Up and Down buttons to move to
“key Lock”.

Press Left and Right buttons, then the menu
changes in order below.
Off Once Always

EXIT

LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK

MOVE

LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK

ENGLISH
5 SECONDS
TRANSPARENT
––
OO : OO
OFF
OO : OO
VOLUME
O
OO : OO
OFF
SELECT

ENGLISH
5 SECONDS
TRANSPARENT
––
12 : 3O
ON
0 7 : OO
VOLUME
15
23 : 3O
OFF

MOVE

SELECT

Press MENU button after the setting is done, and Menu goes to the previous menu.
If the INPUT button is pressed, the menu disappears.

OPTION SETUP

OFF : With the lock function off, you can control the TV with both
the remote control and the buttons on the TV.
ONCE : The lock function will turn off automatically after AC power off/on.
Or after power-cut or unplugging the power cord to plug it back in.
ALWAYS : With the lock function always on, you can control the TV
only with the remote control, not with the buttons on the TV.

- This function prevents children from controlling the TV when parents are not home.
* How to Unlock Key-Lock :
- Bring up the Menu window using the remote control and switch off the Key-Lock.
- When the remote control is not available, press the Power button within 0.5 second while pressing the Menu
button on the top of the TV.

Displaying Information
You can view the channel information and setting status by pressing the “INFO” button on the remote control.

INFO

In case of applying TV input
Press INFO button.

In case of applying VIDEO input
Press INFO button.

PROG NO 5 FREQ 139.25
USER : MONO
CLOCK PM 12 : 30
ON TIME AM 7 : 20
OFF TIME PM 11 : 30

VIDEO
CLOCK PM 12 : 30
ON TIME AM 7 : 20
OFF TIME PM 11 : 30

INFO

In case of applying S-VIDEO input
Press INFO button.

S-VIDEO

OPTION SETUP

CLOCK PM 12 : 30
ON TIME AM 7 : 20
OFF TIME PM 11 : 30

INFO

In case of applying SCART input
Press INFO button.

SCART
CLOCK PM 12 : 30
ON TIME AM 7 : 20
OFF TIME PM 11 : 30

INFO

In case of applying COMPONENT input
Press INFO button.

COMPONENT
1080i
CLOCK PM 12 : 30
ON TIME AM 7 : 20
OFF TIME PM 11 : 30

HYUNDAI LCD TV HQL170WR/200NR

INFO

In case of applying PC input
Press INFO button.

PC
1024 x 768
CLOCK PM 12 : 30
ON TIME AM 7 : 20
OFF TIME PM 11 : 30

OPTION SETUP
70

Teletext Feature
Most TV channels provide written information services via teletext.
Information provided includes with the next entry it is same :
- TV programme times
- News bulletins and weather forecasts
- Sports results
- Travel information

Teletext information is often divided between several pages displayed in sequence,
which can be accessed by :
- Entering the number
- Selecting a title in a list
- Selecting a coloured heading (FASTEXT SYSTEM)
- Travel information

Teletext OSD(On-Screen-Display) Picture

OPTION SETUP

Current page number or
search indications.
Data and Time

Broadcasting channel identity

Selected page number
E

Status information
Fastext information

Text

HYUNDAI LCD TV HQL170WR/200NR

Displaying the Teletext Information
You can display Teletext information at any time on your TV.
For Teletext information to be display correctly channel reception to be stable otherwise
- Information maybe missing or some pages may not be displayed.

TTX

Press TTX button to activate the TTX mode.
(The contents of page 252 are displayed.)

SOURCE

EXIT

2
3

If you wish to display the actual broadcast
at the same time as the teletext page, press TTX/MIX button.
- If the button is pressed a second time,
the function will be deactivated.

MIX

TTX

MAIN

INFO

S.MODE

SLEEP

TTX

MIX

INDEX

LIST/FLOF

STORE

HOLD

SIZE

REVEAL

SUB PAGE

Press TTX button again to
exit from the teletext display.

Selecting Display Options
When you have displayed a teletext page, you can have various options to suit you requirements.
DISPLAY(ACTION)

BUTTON
HOLD

When the secondary pages are displayed in sequence, press the HOLD button.
To freeze the current display page, press the HOLD button again to resume.

SUB PAGE

Displays a secondary page by entering its number.

REVEAL

Displays concealed text such as answer to quiz games.
To return to normal viewing, press this button again.

SIZE

Whenever you press this button, the letter size of the page will be changed.
Once press : The letter of the top half page enlarge to double size.
Twice press : The letter of the bottom half page enlarge to double size.
Three times press : Return to the normal viewing

STORE

To store teletext page in list mode.

LIST/FLOF

Return to LIST or FLOF mode.

OPTION SETUP

HOLD

SUB PAGE

REVEAL

SIZE

STORE

LIST/FLOF

BUTTON

DISPLAY(ACTION)

INDEX

To display the index page, press the INDEX button.

PAGE UP

Displays the next page.

PAGE DOWN

Displays the previous page.

OPTION SETUP

While viewing TTX information, PIP, POP, Multi Function is not supported.

H Y U N DA I L C D CO L O R T V
Appendix
Troubleshooting ..........................................................................75
Care and Cleaning ......................................................................77
Product Specifications ................................................................78

Troubleshooting
Installation Problems
Symptom
How can I install an
antenna?
TV screen is not clear after
installing an indoors
antenna.
How can I view cable
broadcasting?

Possible solution
Refer to pages 23~24.

Indoors antenna may experience poor reception due to surrounding buildings.
Please install an outdoors antenna or wireless antenna.

Please install a cable broadcasting receiver (Converter).

Picture Problems
Symptom
Neither picture nor
sound comes up.

Picture turns on slowly
after power is on.

Vertical and horizontal lines
and web patterns briefly
appear on the
picture and shake.
Input Source information only
appears on black screen.
Poor reception on some
channels.

APPENDIX

Black and white on some
channels.
TV won’t turn on.
Screen is too bright or too
dark.

Possible solution
Check whether power is on.
Check whether the power is cut or whether power cord is properly connected.
Try to plug another product’s power cord to the outlet the LCD TV is plugged into.
This symptom is not a malfunction. This delay is designed to prevent the
distorted and noisy picture when power is on. However, if the picture does not
appear more than 5 minutes after power is on, call a service center.
This symptom may be caused by interference from other electric appliances.
Please avoid using a cordless phone, hairdryer, and electric drill, etc.

Check whether your TV is properly connected to external devices.

Check whether you selected proper channels. Try re-orienting your antenna.
Ensure LNA is activated.
Check other channels for black and white screen. Adjust colour.

Ensure the power cord is plugged.
Adjust brightness.

HYUNDAI LCD TV HQL170WR/200NR
Auto On does not work.

Ensure to use the remote control or power button on the product to turn off your
TV. If you unplug the power cord, the stand-by consumption power becomes 0
(zero), which causes the programmed time to be erased.

After setting the time,
I turned TV off and turn it on.
The programmed information
has been erased.

Audio Problems
Symptom
Too much noise occurs.

No sound while viewing a
cable channel

Possible solution
Check whether the audio setting is in the Stereo mode. In the Stereo mode, the
sound may be distorted in the area where experiences poor reception or is
located far away from a TV broadcasting station.
Make sure an audio or audio/video component is securely inserted into the
appropriate jacks. Check other channels for sound. Check the volume settings on
the cable broadcasting receiver.

Picture is OK but sound does
not come out.

Try to press volume up/volume down buttons of your remote control.

One of the speakers does not
produce sound.

Select sound balance and make proper adjustment. (Page 41)
Check the speaker connection cables.

General
Symptom

Possible solution

Remote control won't work.

Check whether there is a blocking object between the remote control and LCD TV.
Make sure your LCD TV is Power On. (In case of normal, LED on the front panel is
in Red.)
Check whether batteries are inserted with proper polarities(+, -).
When the batteries are worn out, replace with new ones.

Where does the S-Video
cable plug in for audio
output?

Connect the two Audio jacks from the S-Video cable to the left and right ports on
the Composite.

Strange noises are heard.

APPENDIX

I tried to use the TV screen
as a PC monitor
but it doesn’t work.

Ticking noise during or after watching is caused by the change of ambient
environment such as humidity and temperature, which is characterized by plastic
products. Strange ticking noise occurs because a signal is suddenly transmitted
to the LCD panel. So, this is not a malfunction.
Adjust the resolution referring to the standard signal mode table. Check the
specification of your video card installed in your PC. If your video card does not
work in supported hardware. Try upgrading the video card’s driver.

Care and Cleaning

Cabinet Cleaning
Wipe a soft dry cloth.
Do not use inflammables like Benzene or Thinner, or wet clothes.
Do not scratch the panel of TV with a fingernail or pointed object.

Screen Cleaning
Clean the screen with a soft cloth moistened in mild glass
detergent and dry with a soft cloth.
Never use any solvent on the screen such as Acetone, Benzene, or
Thinner, etc.

Cleaning Inside
When the inside needs to be cleaned, contact a service center or
distribution agent where the item is purchased.

APPENDIX

It is recommended cleaning is complete before the rainy season.

HYUNDAI LCD TV HQL170WR/200NR

Product Specifications
MODEL

HQL170WR

HQL200NR

S-Video

1 EA(with common A/V Audio)

A/V (RCA)

1 EA (Input, with Audio)

Component(Y/Cb/Cr)

1 EA (with Audio)

1 EA

SCART

1 EA (FULL)

PC Connector

D-SUB

Recommended. Resolution

1024 x 768 @ 60 Hz

640 x 480 @ 60 Hz

Audio

PC Audio

Headphone

1 EA

Supply

AC 100 - 240 V, 50/60 Hz

Consumption

Typical 70 W

Typical 80 W

Saving

<5W

Dimension(W x D x H mm)

560 x 184 x 361 (with stand)

650 x 184 x 450 (with stand)

Weight

6.5 Kg (with stand)

8.5 Kg (with stand)

Control Type

Remote Control, Key Control

Input/Output

Power

- Specification is subject to change without notice for performance improvement.

APPENDIX
78

APPENDIX

H
Y
U
N
D
A
I

USA

M
A
G

AVC USA. INC.
777 Mark Street, Wood Dale, IL 60191
Tel : 630-595-0123 / 800-568-0060
Fax : 630-595-2345 / 800-784-9422
e-mail : avctech@avcusa.com

Hyundai ImageQuest America
3101 North First Street San Jose, CA 95134
Hyundai tech support
Tel : +800-568-0061,408-232-8654
Fax : +408- 232-8146
e-mail : syuen@hyundaiqa.com

NEW ZEALAND

E
Q
U

TRANSTECH DISTRIBUTORS Ltd.
PO Box 12985 Penrose,
Auckland New Zealand
Tel : 09-571-0775
Fax : 09-571-0776
e-mail : LouisG@Transtech.co.nz
WWW : www.transtech.co.nz

AUSTRALIA

D
T
V

P/N 632 0238 302 Rev.01

Hyundai ImageQuest JAPAN
Shin-Hibiya Bldg, East 5F 1-3-6
Uchisaiwai-Cho, Chiyoda-ku,
Tokyo, Japan 100-0011
Tel : 03-5157-2286
Fax : 03-5157-2284
e-mail : pjkim@iqt.co.kr
C/S P.J.Kim

JAPAN

Hyundai ImageQuest Europe GmbH
Geheimrat Hummel Platz 2
65239, Hochheim, Germany
Tel : 06146 / 904 444
Fax : 06146 / 904 410
e-mail : service@hyundaiq.de
WWW : www.hyundaiq.com

GERMANY

Thomas Electronics Australia Pty Ltd.
3 Sheridan Close
Milperra NSW 2214, Australia
Tel : +61 2 9773 7400
Fax : 61 2 9773 7177
Attn : Ms. Shiely Poniman

Model. HQL170WR/200NR

User's Guide
* The above image may look different from the real product.

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 83
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:0998d9c6-dc3c-4a2c-95f0-713614406496
Producer                        : Acrobat Distiller 5.0.5 for Macintosh
Create Date                     : 2004:12:10 09:07:41Z
Modify Date                     : 2005:05:31 10:00:43+09:00
Metadata Date                   : 2005:05:31 10:00:43+09:00
Creator Tool                    : QuarkXPress 3.3K: LaserWriter 8 KH-8.7.1
Document ID                     : uuid:c86dbd5d-9d18-40b3-89af-880d0aa9fb71
Format                          : application/pdf
Creator                         : ......
Title                           : 1_20PAL_General
Author                          : ......

EXIF Metadata provided by EXIF.tools

Hyundai Imagequest Hql170Wr Users Manual 1_20PAL_General

HQL170WR to the manual cf44f07d-c9e3-5f84-2912-e6f96c785f08

Navigation menu

Versions of this User Manual:

Views

Navigation