ICOM orporated 279501 IC-M90 VHF Marine Transceiver User Manual

ICOM Incorporated IC-M90 VHF Marine Transceiver IC M90 instruction manual

a href="https://usermanual.wiki/ICOM-orporated" itemprop="url"> ICOM orporated >

User Manual

INSTRUCTION MANUALiM90VHF MARINE TRANSCEIVERThis device complies with Part 15 of the FCCRules. Operation is subject to the condition thatthis device does not cause harmful interference.IC-M90.qxd 04.8.23 3:53 PM Page A
iSAFETY TRAINING INFORMATIONYour Icom radio generates RF electromagnetic energy duringtransmit mode. This radio is designed for and classified as“Occupational Use Only”, meaning it must be used only dur-ing the course of employment by individuals aware of the haz-ards, and the ways to minimize such hazards. This radio isNOT intended for use by the “General Population” in an un-controlled environment.This radio has been evaluated for compliance at the distance of 2.5 cm withthe FCC RF exposure limits for “Occupational Use Only”. In addition, your Icomradio complies with the following Standards and Guidelines with regard to RFenergy and electromagnetic energy levels and evaluation of such levels for ex-posure to humans:• FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliancewith FCC Guidelines for Human Exposure to Radio Frequency Electro-magnetic Fields.• American National Standards Institute (C95.1-1992), IEEE Standard forSafety Levels with Respect to Human Exposure to Radio Frequency Elec-tromagnetic Fields, 3 kHz to 300 GHz.• American National Standards Institute (C95.3-1992), IEEE RecommendedPractice for the Measurement of Potentially Hazardous ElectromagneticFields– RF and Microwave.• The following accessories are authorized for use with this product. Use ofaccessories other than those specified may result in RF exposure levelsexceeding the FCC requirements for wireless RF exposure.; Belt Clip (MB-86/103), Rechargeable Ni-Cd Battery Pack (BP-225) and Alkaline BatteryCase (BP-223).To ensure that your expose to RF electromagnetic en-ergy is within the FCC allowable limits for occupationaluse, always adhere to the following guidelines:CAUTIONWARNING• DO NOT operate the radio without a proper antenna attached, as this maydamaged the radio and may also cause you to exceed FCC RF exposurelimits. A proper antenna is the antenna supplied with this radio by the man-ufacturer or antenna specifically authorized by the manufacturer for usewith this radio.• DO NOT transmit for more than 50% of total radio use time (“50% dutycycle”). Transmitting more than 50% of the time can cause FCC RF expo-sure compliance requirements to be exceeded. The radio is transmittingwhen the “TX indicator” lights red. You can cause the radio to transmit bypressing the “PTT” switch.• ALWAYS keep the antenna at least 2.5 cm (1 inch) away from the bodywhen transmitting and only use the Icom belt-clips which are listed onpage 33 when attaching the radio to your belt, etc., to ensure FCC RF ex-posure compliance requirements are not exceeded. To provide the recipi-ents of your transmission the best sound quality, hold the antenna at least5 cm (2 inches) from your mouth, and slightly off to one side.The information listed above provides the user with the information needed tomake him or her aware of RF exposure, and what to do to assure that this radiooperates with the FCC RF exposure limits of this radio.Electromagnetic Interference/CompatibilityDuring transmissions, your Icom radio generates RF energy that can possiblycause interference with other devices or systems. To avoid such interference,turn off the radio in areas where signs are posted to do so. DO NOT operatethe transmitter in areas that are sensitive to electromagnetic radiation such ashospitals, aircraft, and blasting sites.Occupational/Controlled UseThe radio transmitter is used in situations in which persons are exposed asconsequence of their employment provided those persons are fully aware ofthe potential for exposure and can exercise control over their exposure.IC-M90.qxd 04.8.23 3:53 PM Page i
iiIN CASE OF EMERGENCYIf your vessel requires assistance, contact other vessels andthe Coast Guard by sending a distress call on Channel 16.❍USING CHANNEL 16DISTRESS CALL PROCEDURE1. “MAYDAY MAYDAY MAYDAY.”2. “THIS IS ...........................” (name of vessel)3. Your call sign or other indication of the ves-sel.4. “LOCATED AT .....................” (your position)5. The nature of the distress and assistance re-quired.6. Any other information which might facilitatethe rescue.RECOMMENDATIONCLEAN THE TRANSCEIVER THOROUGHLY WITH FRESHWATER after exposure to saltwater, and dry it before opera-tion. Otherwise, the transceiver’s keys, switches and con-trollers may become inoperable due to salt crystallization.MIC /SPIC-M90.qxd 04.8.23 3:53 PM Page ii
Download:
Mirror Download [FCC.gov]
Document ID474596
Application IDmPZKenYZJGr4uIhXQ45FPA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize74.16kB (927054 bits)
Date Submitted2004-09-30 00:00:00
Date Available2004-11-22 00:00:00
Creation Date2004-08-23 15:56:18
Producing SoftwareAcrobat Distiller 4.05 for Macintosh
Document Lastmod2004-09-20 09:59:49
Document TitleIC-M90 instruction manual
Document Author: Icom Inc.
FCC ID Filing: AFJ279501

Navigation menu