ICOM orporated 297000 Scanning Receiver User Manual

ICOM Incorporated Scanning Receiver Users Manual

a href="https://usermanual.wiki/ICOM-orporated" itemprop="url"> ICOM orporated >

Users Manual

INSTRUCTION MANUALi2820HDUAL BAND FM TRANSCEIVERThis device complies with Part 15 of the FCC rules. Operation is sub-ject to the following two conditions: (1) This device may not causeharmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.
iFOREWORDThank you for purchasing this Icom product. The IC-2820HVHF/UHF FM TRANSCEIVERis designed and built with Icom’s su-perior technology and craftsmanship. With proper care, thisproduct should provide you with years of trouble-free opera-tion.We want to take a couple of moments of your time to thankyou for making your IC-2820H your radio of choice, and hopeyou agree with Icom’s philosophy of “technology first.” Manyhours of research and development went into the design ofyour IC-2820H.DDFEATURES❍Diversity reception is ready❍DV (Digital Voice) with GPS operation capabilities (Optional UT-123 is required)❍V/V, U/U simultaneous receive capability❍Independent controls for each left and rightbands❍Separate controller for flexible installation❍Remote control microphone standardIMPORTANTREAD ALL INSTRUCTIONS carefully and completelybefore using the transceiver.SAVE THIS INSTRUCTION MANUAL— This in-struction manual contains important operating instructions forthe IC-2820H.EXPLICIT DEFINITIONSWORD DEFINITIONRWARNING!CAUTIONNOTEPersonal injury, fire hazard or electric shockmay occur.Equipment damage may occur.Recommended for optimum use. No risk ofpersonal injury, fire or electric shock.Icom, Icom Inc. and the  logo are registered trademarks of IcomIncorporated (Japan) in the United States, the United Kingdom, Ger-many, France, Spain, Russia and/or other countries.
RWARNING RF EXPOSURE! This device emits RadioFrequency (RF) energy. Extreme caution should be observed whenoperating this device. If you have any questions regarding RF expo-sure and safety standards please refer to the Federal Communica-tions Commission Office of Engineering and Technology’s report onEvaluating Compliance with FCC Guidelines for Human Radio fre-quency Electromagnetic Fields (OET Bulletin 65).RWARNING! NEVER connect the transceiver to an AC out-let. This may pose a fire hazard or result in an electric shock.RWARNING! NEVER operate the transceiver while driving avehicle. Safe driving requires your full attention—anything less mayresult in an accident.NEVER connect the transceiver to a power source of more than16 V DC. This will damage the transceiver.NEVER connect the transceiver to a power source using reversepolarity. This will damage the transceiver.NEVER cut the DC power cable between the DC plug and fuseholder. If an incorrect connection is made after cutting, the transceivermay be damaged.NEVER expose the transceiver to rain, snow or any liquids. Thetransceiver may be damaged.NEVER operate or touch the transceiver with wet hands. This mayresult in an electric shock or damage the transceiver.NEVER place the transceiver where normal operation of the vehi-cle may be hindered or where it could cause bodily injury.NEVER let objects impede the operation of the cooling fan on therear panel.DO NOT push the PTT when not actually desiring to transmit.DO NOT allow children to play with any radio equipment contain-ing a transmitter.During mobile operation, DO NOT operate the transceiver with-out running the vehicle’s engine. When the transceiver’s power is ONand your vehicle’s engine is OFF, the vehicle’s battery will soon be-come exhausted.AVOID using or placing the transceiver in direct sunlight or inareas with temperatures below –10°C or above +60°C.BE CAREFUL! The transceiver will become hot when operat-ing it continuously for long periods.AVOID setting the transceiver in a place without adequate venti-lation. Heat dissipation may be affected, and the transceiver may bedamaged.AVOID the use of chemical agents such as benzine or alcoholwhen cleaning, as they can damage the transceiver’s surfaces.USE Icom microphones only (supplied or optional). Other manu-facturer’s microphones have different pin assignments and may dam-age the transceiver if attached.For U.S.A. onlyCAUTION: Changes or modifications to this device, not ex-pressly approved by Icom Inc., could void your authority tooperate this device under FCC regulations.iiPRECAUTIONS
Download:
Mirror Download [FCC.gov]
Document ID746386
Application IDb0FJrprZCjT9UT9gilkohg==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize165.92kB (2073999 bits)
Date Submitted2007-01-11 00:00:00
Date Available2007-01-11 00:00:00
Creation Date2006-11-30 18:32:46
Producing SoftwareAcrobat Distiller 4.05 for Macintosh
Document Lastmod2007-01-05 14:11:26
Document TitleUsers Manual
FCC ID Filing: AFJ297000

Navigation menu